xr6000 WIRELESS AUDIO KIT (800MHz or 900MHx)

Transcription

1 xr6000 WIRELESS AUDIO KIT (800MHz or 900MHx) KEYPAD, CONSOLE AND 900MHz RECEIVER ASSEMBLY ASSEMBLY AND OPERATIONS INSTRUCTIONS

2

3 xr6000 WIRELESS AUDIO KIT CONTENTS Console Box Contents: xr6000 Entertainment Console xr6000 with 800MHz or 900MHz Receiver Audio Jack Mounting Bracket Audio Jack Assembly (Top and Bottom) Keypad Cable Audio Cable Heart Rate Cable 800MHz or 900MHz Receiver Cable Console Hardware Assembly and Operations Instructions xr6000 WIRELESS AUDIO KIT (800MHz or 900MHx) KEYPAD, CONSOLE AND 900MHz RECEIVER ASSEMBLY C-1 C-4 #2 Phillips C-2 #2 Phillips C-5 #2 Phillips C-3 ASSEMBLY AND OPERATIONS INSTRUCTIONS *Hardware illustrated to scale; not actual size. 1

4 xr6000 ENTERTAINMENT KIT ASSEMBLY INSTRUCTIONS Complete these instructions during initial assembly of the xr6000 seated elliptical, after mounting the keypad on the mast. For a fully-assembled xr6000, remove the console, console back cover, keypad and cable, top cover, and right side shroud to complete these instructions. *Retain all screws for use in this assembly. A. Route Audio Cable Place keypad with receiver on keypad plate; attach through top 2 holes with C-2 (Qty 2); tighten. Remove CSAFE port from keypad plate. Wrap grommet C-1 around audio cable. Route cable down through hole in keypad plate and secure grommet in hole. B. Keypad (with Receiver) and Audio Jack Receiver Cable Audio Cable Down here Keypad Cable Connect keypad cable from base to keypad, and connect audio cable and receiver cable to receiver. Position audio jack mounting bracket beneath keypad plate; attach bracket and keypad through bottom 2 holes with C-3 (Qty 2); tighten. Connect audio cable to audio jack assembly. Fit under edge of keypad Pins in holes Insert pins of audio jack assembly (top) into holes in mounting bracket and snap into place under the keypad. The edges of audio jack assembly snap underneath the edge of the keypad for a tight fit. Position bottom piece of audio jack assembly and and secure to audio jack mounting bracket with C-4 (Qty 2). 2

5 C. Console Keypad (black, 14-pin) Heart Rate (white, 3-pin) D. User Settings Pedal the unit to activate the keypad for programming. Console to Base (white, 14-pin) Fan (white, 2-pin) Handlebar Control (white, 6-pin) Ground (metal; green wire) 900MHz Receiver/C-SAFE (white, 5-pin) PRESS AND HOLD EXIT WITHOUT SAVING VIEW OPTIONS Remove original CSAFE cable (white, 5-pin cable under keypad) and replace with the Receiver/CSAFE cable included in this kit. Route this and other cables (Qty 7) through mast plate. (Audio is already routed.) Keypad (black, 14-pin) Console to Base (white, 14-pin) Handlebar Control (white, 6-pin) Reserved Software Updates (black) Heart Rate (white, 3-pin) C-SAFE (white, 5-pin) Fan (white, 2-pin) EXIT AND SAVE Press and hold / to display programming options. Press Enter to view setting options as described on the following page; press to select option and move to next setting. (Factory setting shown in BOLD.) Press Enter when Exit is displayed to save selections. Press Pause Clear twice to exit without saving changes. Unused (white, 8-pin) Ground (metal; green wire) Unused (audio jack) Match cable connectors to sockets on console back; connect. E. Complete Installation Replace top cover and left side shroud, or, return to xr6000 Assembly Instructions to complete assembly of new unit. Align and attach console to mast plate with C-5 (Qty 4). 3

6 Warm-Up Clock Direction Max Workout Time Unit Type Beep 900MHz (800 MHz) Channels 900MHz (800MHz) Near/Far Brightness Exit USER SETTINGS Press and hold / to display programming options. Controls 3-minute warm-up: ON or OFF Controls clock counting: UP or DOWN Sets limit for workout time: 1 to 99 minutes (factory-set at 30:00). Press Enter to scroll in 15-minute increments, or enter value using number keypad. Controls weight and distance display units: ENGLISH (pounds and miles) or METRIC (kilograms and kilometers) Controls console sounds: ON or OFF. Initiates channel programming; press Enter to begin. Press CH () to select the appropriate program modes for your facility: P-1 = MYE Entertainment 900MHz (800MHZ) transmitters P-2 = Cardio Theater LCS 900MHz (800MHZ) transmitters P-3 = Cardio Theater / Enercise x TV 900MHz (800MHZ) transmitters P-4 = BroadcastVision 900MHz (800MHZ) transmitters To automatically scan and program channels: With the proper transmitter mode displayed, press Enter to auto-scan and lock transmitters. Repeat as needed for each transmitter type. Press CH () or CH () to verify that PRESET appears in the display, indicating that all transmitters have been locked in. Press EQ to save 900MHZ (800MHZ) CHANNELS and return to user settings. To manually program channels: With the proper transmitter mode displayed, press EQ. Press CH () or CH () to scroll through all transmitter channels. To add or delete a transmitter channel press Enter. NOTE: PRESET will appear in the display when a transmitter channel is programmed. To exit manual program mode press the EQ button. The display will blink briefly and will default to first transmitter channel programmed. Use the CH () or CH () to select another transmitter type (P-1 to P-4) as needed and repeat these manual steps. Press EQ to save 900MHZ (800MHZ) CHANNELS and return to user settings. Sets the reception sensitivity of the 900MHz (800MHz) receiver, FAR (for most installations) or NEAR (when receiver is installed 1-5 feet from a transmitter). Press Enter to switch from one setting to the other. The Message Center displays the revised setting for 5 seconds, then returns to 900 MHZ (800MHZ) NEAR/FAR. Controls brightness of the console LEDs: 1 (dim) to 8 (bright). Press Enter to Exit and save settings. Press Pause Clear twice to exit without saving. 4

7 900MHz Keypad Buttons The table below describes the buttons controlling wireless audio functions on the xr6000. Refer to xr6000 Operations Manual for descriptions of the elliptical programming buttons on the keypad. EQ Mute EQ VOL (/) CH (/) Turn TV audio on/off. Change the audio ambiance. Press EQ to select one of 5 preset EQ tones: FLAT, CLASSICAL, JAZZ, ROCK, BASS Increase/decrease audio volume. Note: When the user stops pedaling for 10 seconds or the console is reset, the volume control is automatically reset to level 2. (VOL () is also used to program NEAR/FAR in User Settings.) Move backward () or forward () through the 900MHz (800MHz) channels programmed for your facility. Learn More at Log on to for additional information about product features and answers to many common questions and tips on using your elliptical. If you would like to speak to an Octane Fitness Customer Service specialist, please call OCTANE4 or , extension 1. 5

8 Are you passionate about your workout and the results? Share your story with others on the Octane Fitness web site. Go to: Then click on Share My Story and show the world how fueled you are F U E L Y O U R L I F E Octane Fitness Octane Fitness International US & Canada, Latin America, Asia & Asian Pacific Europe, Middle East, Africa 7601 Northland Drive North Rivium Weestlaan 19 Suite LD, Capelle a/d Ijssel Brooklyn Park, MN The Netherlands Phone: 888.OCTANE4 (US and Canada) Phone: (Latin America, Asia and Asian Pacific) Fax: Fax: Octane Fitness, LLC. All rights reserved. Octane Fitness and Fuel Your Life are registered trademarks of Octane Fitness. Any use of these trademarks, without the express written consent of Octane Fitness, is forbidden REV B