Product Specification

Transcription

1 Product Specification MLC Basic Bus Module The Basic Bus Module is part of the MLC DIN-Rail mounting multiple loop PID control system. The Basic Bus Module is the supervisor in the MLC system and can communicate with up to 8 single or multiple Loop Modules. The Basic Bus Module is for standalone systems that require no supervision by a master device as no fieldbus connection is provided. Dedicated Configuration Software Configurable port Direct DIN Rail Mounting Fully Isolated from any other system Technical Data Physical Dimensions Mounting Weight Operating & Environmental Temperature & RH Power Supply Power Protection West PC Configuration protocol only Communicates with West MLC Configuration Software Three colour LED, indicating Power Fail, Bus Alarm & Communications Status 6-way RJ Type Height: 00mm, Width: 30mm, Depth: 0mm Directly fitted onto 35mm Top-Hat DIN mounting rail (EN500, DIN4677-3) 0.kg 0 to 55 C (-0 to 80 C storage), 30% to 90%RH non-condensing 8 to 3dc (inc ripple), 30W Max -way 5.08mm Combicon type IEC IP0. Designed for installation in an enclosure which is sealed against dust and moisture Approvals and Certification EMC: Certified to EN636. Safety: Complies with EN600 and UL 3-

2 West Instruments Tel: +44 (0) The Hyde Business Park Fax: +44 (0) Web: Brighton BN 4JU, UK Connection Details Power Connections Configuration Port Power Input 8 3 dc 30W Max +4V A +4V System Dimensions DIN Rail Clamp 30mm mm 0mm 00mm Pin No. Signal / Receive Data Transmit Data 3 No connection 4 Signal Ground 3 4 RJ Order Code MLC 9000-BM0-NF Bus Module with only In accordance with our policy of continuous improvement, we reserve the right to change specifications from those shown in this document. MLC Basic Bus Module 05/04 West Instruments is a division of Danaher (UK Industries) Ltd. A member of the Danaher Corporation. Registered in England No VAT No GB Registered Office: Danaher House, Parkway One Business Centre, Parkway Drive, Sheffield, S9 4WU

3 Product Specification MLC MODBUS RTU Bus Module The MODBUS Bus Module is part of the MLC DIN-Rail mounted multiple loop PID control system. The Bus Module is the supervisor in the MLC system and manages the communication with up to 8 single or multiple Loop Modules and the MODBUS RTU network. Systems larger than 3 loops can be built using multiple Bus Modules, within the limitations of your MODBUS RTU system. MODBUS RTU port Software Configurable Configurable data rate Configuration port DIN Rail Mounting Configurable Data Assemblies Technical Data MODBUS Port Configuration Messaging Supported Physical Dimensions Mounting Weight Operating & Environmental Temperature & RH Power Supply Power Protection Approvals and Certification MODBUS RTU (Slave Device) Connection of the MLC system to a MODBUS RTU Master Device Data Rates.4kbps, 4.8kbps, 9.6kbps and 9.kbps Address 0 57 (Default = 96). Configured using the MLC9000+ Configuration software, via the dedicated configuration port MODBUS RTU codes 0, 0, 03, 04, 05, 06, 08, 0x0F, 0x0 and 0x7 3-way 5.08mm combicon type Two Colour LED, indicating On/Off-line, Self Test, Bus Fault and Communication Status West PC Configuration protocol only Communicates with West MLC Configuration Software Three colour LED, indicating Power Fail, Bus Alarm & Communications Status 6-way RJ Type Height: 00mm, Width: 30mm, Depth: 0mm Directly fitted onto 35mm Top-Hat DIN mounting rail (EN500, DIN4677-3) 0.kg 0 to 55 C (-0 to 80 C storage), 30% to 90%RH non-condensing 8 to 3dc (inc ripple), 30W Max -way 5.08mm Combicon type IEC IP0. Designed for installation in an enclosure which is sealed against dust and moisture EMC: Certified to EN636. Safety: Complies with EN600 and UL 3-, awaiting approval from MODBUS Organisation

4 West Instruments Tel: +44 (0) The Hyde Business Park Fax: +44 (0) Web: Brighton BN 4JU, UK Connection Details Field Bus Port Configuration Port Power Input 8 3 dc 30W Max +4V Power Connections A +4V System Dimensions DIN Rail Clamp 30mm mm 0mm MODBUS Connections (Red) Tx/Rx+ (A) (White) Tx/Rx (B) (Green) 00mm Data Assemblies Using the MLC configuration software the user can define a collection of parameters for communication via MODBUS RTU. This allows the user to fully customise the communication interface to the MLC system. The user drags and drops the required parameters into the data assemblies allowing the MODBUS master to gather several parameters in a single message. Order Code MLC 9000-BM0-MB Bus Module with MODBUS RTU & In accordance with our policy of continuous improvement, we reserve the right to change specifications from those shown in this document. MLC MODBUS RTU Bus Module 05/04 West Instruments is a division of Danaher (UK Industries) Ltd. A member of the Danaher Corporation. Registered in England No VAT No GB Registered Office: Danaher House, Parkway One Business Centre, Parkway Drive, Sheffield, S9 4WU

5 Product Specification MLC DeviceNet Bus Module The DeviceNet Bus Module is part of the MLC DIN-Rail mounted multiple loop PID control system. The Bus Module is the supervisor in the MLC system and manages the communication with up to 8 single or multiple Loop Modules and the DeviceNet network. Systems larger than 3 loops can be built using multiple Bus Modules, within the limitations of your DeviceNet system. DeviceNet port Software Configurable Supports up-to 500kbps Configuration port DIN Rail Mounting Configurable Data Area Technical Data DeviceNet Port DeviceNet (Class Slave Device) Connection of the MLC system to a DeviceNet Master Device Configuration Data Rate 5kbps, 50kbps or 500kbps. MAC ID 0 63 (Defaults 5kbps, ID 63). Configured using the MLC Configurator software, via the configuration port I/O Size Dependant on Data Assembly Configuration. Maximum 56 bytes (total) of input/output data limited by DeviceNet Messaging Supported I/O messages and Explicit messages EDS File The EDS file is defined by the MLC Configuration software 5-way 5.08mm combicon type Two Colour LED, indicating On/Off-line, Self Test, Bus Fault and Communication Status West PC Configuration protocol only Communicates with West MLC Configuration Software Three colour LED, indicating Power Fail, Bus Alarm & Communications Status 6-way RJ Type Physical Dimensions Height: 00mm, Width: 30mm, Depth: 0mm Mounting Directly fitted onto 35mm Top-Hat DIN mounting rail (EN500, DIN4677-3) Weight 0.kg Operating & Environmental Temperature & RH 0 to 55 C (-0 to 80 C storage), 30% to 90%RH non-condensing Power Supply 8 to 3dc (inc ripple), 30W Max Power -way 5.08mm Combicon type Protection IEC IP0. Designed for installation in an enclosure which is sealed against dust and moisture Approvals and Certification EMC: Certified to EN636. Safety: Complies with EN600 and UL 3-, awaiting approval from ODVA

6 West Instruments Tel: +44 (0) The Hyde Business Park Fax: +44 (0) Web: Brighton BN 4JU, UK Connection Details Power Connections Field Bus Port Configuration Port Power Input 8 3 dc 30W Max +4V A +4V System Dimensions DIN Rail Clamp 30mm mm 0mm DeviceNet Connections V+ (Red) CAN_H (White) 00mm SHIELD CAN_L (Blue) V- (Black) Data Assemblies Using the MLC configuration software the user can define a collection of parameters (data assembly) for communication via I/O messaging. This allows the user to fully customise the communication interface to the MLC system. The user drags and drops the required parameters into the data assembly area an EDS file is then created for use with your DeviceNet master device. Order Code MLC 9000-BM30-DN Bus Module with DeviceNet & In accordance with our policy of continuous improvement, we reserve the right to change specifications from those shown in this document. MLC DeviceNet Bus Module 05/04 West Instruments is a division of Danaher (UK Industries) Ltd. A member of the Danaher Corporation. Registered in England No VAT No GB Registered Office: Danaher House, Parkway One Business Centre, Parkway Drive, Sheffield, S9 4WU

7 Product Specification MLC CANopen Bus Module The CANopen Bus Module is part of the MLC DIN-Rail mounting PID control system. The Bus Module is the supervisor in the MLC system and manages the communication with up to 8 single or multiple Loop Modules and the CANopen network. Systems larger than 3 loops can be built using multiple Bus Modules, within the limitations of your CANopen system. CANopen port Software Configurable Supports up-to 04kbps Configuration port DIN Rail Mounting Configurable Data Assemblies Technical Data CANopen Port Configuration I/O Size Messaging Supported EDS File Physical Dimensions Mounting Weight Operating & Environmental Temperature & RH Power Supply Power Protection Approvals and Certification CANopen (Slave Device) Connection of the MLC system to a CANopen Master Device Data Rate 5kbps, 50kbps, 500kbps or 04kbps. Node ID 7 (Defaults 5kbps, Node ID ). Configured using the MLC Workshop software, via the configuration port Dependant on Data Assembly Configuration. Maximum 56 bytes (total) of input/output data limited by CANopen Up to 64 Asynchronous PDO s, SSDO The EDS file is defined by the MLC Workshop Configuration Software 5-way 5.08mm combicon type Two Colour LED, indicating On/Off-line, Self Test, Bus Fault and Communication Status West PC Configuration protocol only Communicates with West MLC Workshop Configuration Software Three colour LED, indicating Power Fail, Bus Alarm & Communications Status 6-way RJ Type Height: 00mm, Width: 30mm, Depth: 0mm Directly fitted onto 35mm Top-Hat DIN mounting rail (EN500, DIN4677-3) 0.kg 0 to 55 C (-0 to 80 C storage), 30% to 90%RH non-condensing 8 to 3dc (inc ripple), 30W Max -way 5.08mm Combicon type IEC IP0. Designed for installation in an enclosure which is sealed against dust and moisture EMC: Certified to EN636. Safety: Complies with EN600 and UL 3-, awaiting approval from CiA

8 West Instruments Tel: +44 (0) The Hyde Business Park Fax: +44 (0) Web: Brighton BN 4JU, UK Connection Details Power Connections Field Bus Port Configuration Port Power Input 8 3 dc 30W Max +4V A +4V System Dimensions DIN Rail Clamp 30mm mm 0mm CANopen Connections V+ (Red) CAN_H (White) 00mm SHIELD CAN_L (Blue) V- (Black) Data Assemblies Using the MLC configuration software the user can define a collection of parameters (data assembly) for communication via Asynchronous PDO messaging. This allows the user to fully customise the communication interface to the MLC system. The user drags and drops the required parameters into the data assemblies an EDS file is then created for use with your CANopen master device. Order Code MLC 9000-BM30-CO BCM with CANopen & s In accordance with our policy of continuous improvement, we reserve the right to change specifications from those shown in this document. MLC CANopen Spec Sheet 06/04 West Instruments is a division of Danaher (UK Industries) Ltd. A member of the Danaher Corporation. Registered in England No VAT No GB Registered Office: Danaher House, Parkway One Business Centre, Parkway Drive, Sheffield, S9 4WU

9 Product Specification MLC PROFIBUS Bus Module The PROFIBUS Bus Module is part of the MLC DIN-Rail mounting multiple loop PID control system. The Bus Module is the supervisor in the MLC system and manages the communication with up to 8 single or multiple Loop Modules and the PROFIBUS network. Systems larger than 3 loops can be built using multiple Bus Modules, within the limitations of your PROFIBUS system. PROFIBUS DP port Software Configurable Auto Detects data rate Configuration port DIN Rail Mounting Configurable Data Assemblies Technical Data PROFIBUS Port Configuration I/O Size Messaging Supported GSD/GSE File Physical Dimensions Mounting Weight Operating & Environmental Temperature & RH Power Supply Power Protection Approvals and Certification PROFIBUS DP (Slave Device) Connection of the MLC system to a PROFIBUS DP Master Device Data Rate auto detected by BCM from 9.6kbps, 9.kbps, 45.4kbps, 93.75kbps, 87.5kbps, 500kbps,.5Mbps, 3Mbps, 6Mbps and Mbps. Profibus Address 0 6 (Default = 6). Configured using the MLC9000+ Configurator software, via the configuration port Dependant on Data Assembly Configuration. Maximum 56 (total) bytes of input/output data limited by PROFIBUS Cyclic and Acyclic messages The GSD/GSE file is defined by the MLC configuration software 9-way D-Type Two Colour LED, indicating On/Off-line, Self Test, Bus Fault and Communication Status West PC Configuration protocol only Communicates with West MLC Configuration Software Three colour LED, indicating Power Fail, Bus Alarm & Communications Status 6-way RJ Type Height: 00mm, Width: 30mm, Depth: 0mm Directly fitted onto 35mm Top-Hat DIN mounting rail (EN500, DIN4677-3) 0.kg 0 to 55 C (-0 to 80 C storage), 30% to 90%RH non-condensing 8 to 3dc (inc ripple), 30W Max -way 5.08mm Combicon type IEC IP0. Designed for installation in an enclosure which is sealed against dust and moisture EMC: Certified to EN636. Safety: Complies with EN600 and UL 3-, awaiting approval from PROFIBUS

10 West Instruments Tel: +44 (0) The Hyde Business Park Fax: +44 (0) Web: Brighton BN 4JU, UK Connection Details Power Connections Field Bus Port Configuration Port Power Input 8 3 dc 30W Max +4V A +4V System Dimensions Fieldbus Connections DIN Rail Clamp 00mm 30mm mm 0mm RxD/TxD+ 4 CNTR-P 5 DGND 6 VP 7 RxD/TxD- Data Assemblies Using the MLC configuration software the user can define a collection of parameters (data assemblies) for communication via cyclic messaging. This allows the user to fully customise the communication interface to the MLC system. The user drags and drops the required parameters into the data assemblies area a GSD file is then created for use with your PROFIBUS master device. Order Code MLC 9000-BM40-PB Bus Module with PROFIBUS & In accordance with our policy of continuous improvement, we reserve the right to change specifications from those shown in this document. MLC PROFIBUS Bus Module 05/04 West Instruments is a division of Danaher (UK Industries) Ltd. A member of the Danaher Corporation. Registered in England No VAT No GB Registered Office: Danaher House, Parkway One Business Centre, Parkway Drive, Sheffield, S9 4WU

11 Product Specification MLC Ethernet/IP Bus Module The Ethernet/IP Bus Module is part of the MLC DIN-Rail mounting multiple loop PID control system. The Bus Module is the supervisor in the MLC system and manages the communication with up to 8 single or multiple Loop Modules and the Ethernet/IP network. Systems larger than 3 loops can be built using multiple Bus Modules, within the limitations of your Ethernet/IP system. Ethernet/IP port Software Configurable 0/00BaseT supported Configuration port DIN Rail Mounting Configurable Data Assemblies Technical Data Ethernet/IP Port Configuration Messaging Supported Physical Dimensions Mounting Weight Operating & Environmental Temperature & RH Power Supply Power Protection Approvals and Certification Ethernet/IP (Slave Device) Connection of the MLC system to a Ethernet/IP Master Device IP Address and MAC Address. Configured using the MLC9000+ Configurator software, via the configuration port I/O and Explicit messaging RJ45 type conforming to CAT5 0/00BaseT Two Colour LED, indicating On/Off-line, Self Test, Bus Fault and Communication Status West PC Configuration protocol only Communicates with West MLC Configuration Software Three colour LED, indicating Power Fail, Bus Alarm & Communications Status 6-way RJ Type Height: 00mm, Width: 30mm, Depth: 0mm Directly fitted onto 35mm Top-Hat DIN mounting rail (EN500, DIN4677-3) 0.kg 0 to 55 C (-0 to 80 C storage), 30% to 90%RH non-condensing 8 to 3dc (inc ripple), 30W Max -way 5.08mm Combicon type IEC IP0. Designed for installation in an enclosure which is sealed against dust and moisture EMC: Certified to EN636. Safety: Complies with EN600 and UL 3-, awaiting approval from ODVA

12 West Instruments Tel: +44 (0) The Hyde Business Park Fax: +44 (0) Web: Brighton BN 4JU, UK Connection Details Power Connections Field Bus Port Configuration Port Power Input 8 3 dc 30W Max +4V A +4V System Dimensions DIN Rail Clamp 30mm mm 0mm Ethernet/IP Connections Pin No. 568A 568B WHITE/green WHITE/orange GREEN/white ORANGE/white 3 WHITE/orange WHITE/green 00mm 4 BLUE/white BLUE/white 5 WHITE/blue WHITE/blue 6 ORANGE/white GREEN/white 7 WHITE/brown WHITE/brown 8 BROWN/white BROWN/white Data Assemblies Using the MLC configuration software the user can define a collection of parameters (data assembly) for communication via I/O messaging. This allows the user to fully customise the communication interface to the MLC system. The user drags and drops the required parameters into the data assembly area an EDS file is then created for use with your Ethernet/IP master device. Order Code MLC 9000-BM50-EI Bus Module with Ethernet/IP & In accordance with our policy of continuous improvement, we reserve the right to change specifications from those shown in this document. MLC Ethernet/IP Bus Module 05/04 West Instruments is a division of Danaher (UK Industries) Ltd. A member of the Danaher Corporation. Registered in England No VAT No GB Registered Office: Danaher House, Parkway One Business Centre, Parkway Drive, Sheffield, S9 4WU

13 Product Specification MLC MODBUS/TCP Bus Module The MODBUS/TCP Bus Module is part of the MLC DIN-Rail mounted multiple loop PID control system. The Bus Module is the supervisor in the MLC system and manages the communication with up to 8 single or multiple Loop Modules and the MODBUS/TCP network. Systems larger than 3 loops can be built using multiple Bus Modules, within the limitations of your MODBUS/TCP system. MODBUS/TCP port Software Configurable 0/00BaseT supported Configuration port DIN Rail Mounting Configurable Data Area Technical Data MODBUS/TCP Port Configuration Messaging Supported Physical Dimensions Mounting Weight Operating & Environmental Temperature & RH Power Supply Power Protection Approvals and Certification MODBUS/TCP (Slave Device) Connection of the MLC system to a MODBUS/TCP Master Device IP Address, MAC Address and MODBUS port Address 0 57 (Default = 96). Configured using the MLC Configurator software, via the configuration port codes 0, 0, 03, 04, 05, 06, 08, 0Fh, 0h and 7h RJ45 type conforming to CAT5 0/00BaseT Two Colour LED, indicating On/Off-line, Self Test, Bus Fault and Communication Status West PC Configuration protocol only Communicates with West MLC Configuration Software Three colour LED, indicating Power Fail, Bus Alarm & Communications Status 6-way RJ Type Height: 00mm, Width: 30mm, Depth: 0mm Directly fitted onto 35mm Top-Hat DIN mounting rail (EN500, DIN4677-3) 0.kg 0 to 55 C (-0 to 80 C storage), 30% to 90%RH non-condensing 8 to 3dc (inc ripple), 30W Max -way 5.08mm Combicon type IEC IP0. Designed for installation in an enclosure which is sealed against dust and moisture EMC: Certified to EN636. Safety: Complies with EN600 and UL 3-, awaiting approval from MODBUS Organisation

14 West Instruments Tel: +44 (0) The Hyde Business Park Fax: +44 (0) Web: Brighton BN 4JU, UK Connection Details Power Connections Field Bus Port Configuration Port Power Input 8 3 dc 30W Max +4V A +4V System Dimensions DIN Rail Clamp 30mm mm 0mm MODBUS/TCP Connections Pin No. 568A 568B WHITE/green WHITE/orange GREEN/white ORANGE/white 3 WHITE/orange WHITE/green 00mm 4 BLUE/white BLUE/white 5 WHITE/blue WHITE/blue 6 ORANGE/white GREEN/white 7 WHITE/brown WHITE/brown 8 BROWN/white BROWN/white Data Assemblies Using the MLC configuration software the user can define a collection of parameters (data assembly) for communication via MODBUS/TCP. This allows the user to fully customise the communication interface to the MLC system. The user drags and drops the required parameters into the data assembly area allowing the MODBUS/TCP master to gather several parameters in a single message. Order Code MLC 9000-BM50-MT Bus Module with MODBUS/TCP & In accordance with our policy of continuous improvement, we reserve the right to change specifications from those shown in this document. MLC MODBUS/TCP Bus Module 05/04 West Instruments is a division of Danaher (UK Industries) Ltd. A member of the Danaher Corporation. Registered in England No VAT No GB Registered Office: Danaher House, Parkway One Business Centre, Parkway Drive, Sheffield, S9 4WU