Features IP66. Installation Counting range Operation light Rated voltage Model No.

Transcription

1 1421 Meter TH8 DC Meter * Refer to our website for details of product. RoH compliance Related Information General terms and conditions... F-3 election guide... P.1411~ PHOTO PHOTO AFETY LIGHT CURTAIN / AFETY PREURE / UE ENOR OPTION IMPLE UNIT MEAURE panasonic.net/id/pidsx/global DC-powered hour meters with high environment resistance Features IP66 waterproof construction The front panel surface keeps water and dust out. Includes operation light (LED) The operation LED illuminates so you can quickly verify operation status. IP66 Typical applications counting for leased equipment Maintenance management of various equipments INTERCE VIION PRODUCT TYPE Installation Counting range Operation light Rated voltage Model No. 12 V DC TH833C Panel installation 0 to hours LED illuminates while operating. 24 V DC TH834C Note: Products are UL and c-ul certified as standard. (uffix U is not required on Model No. when ordering.) election Guide LH2H TH63/TH64 TH13/TH23 TH14/TH24 TH40 TH8

2 MEMO 1422

3 1423 DIN size / Common TERMINAL OCKET (Unit: mm in, Tolerance: ±1 ±0.039) AFETY LIGHT CURTAIN / AFETY PREURE / UE ENOR OPTION IMPLE UNIT MEAURE- r PM4H- PM4H-M PM4H-D/DM PM4H-F8 PM4H-F8R PM4H-W -L QM4H PM4 (8-pin type) PM4H-A PM4H-F11R (11-pin type) Type Counter -L (8-pin type) -L - -W (11-pin type) Appearance DIN rail socket (8-pin) AT8-DF8K DIN rail socket (11-pin) AT8-DF11K Dimensions ø4.4 ø ø4.5 ø Terminal wiring (Top view) Mounting hole dimensions 2-M4 screw holes (or ø4.2 ±0.1 ø0.165 ±0.039 dia. holes) 40 ± ± ± ± The minimum distance between the holes which are parallel drilled. 2-M4 screw holes (or ø4.2 ±0.1 ø0.165 ±0.039 dia. holes) The minimum distance between the holes which are parallel drilled. Note: The terminal numbers on the counter and timer are identifical to those on the terminal socket. OCKET (Unit: mm in, Tolerance: ±1 ±0.039) INTERCE VIION r PM4H- PM4H-M PM4H-D/DM PM4H-F8 PM4H-F8R PM4H-W -L (8-pin type) PM4 QM4H PM4H-A PM4H-F11R (11-pin type) Type Counter -L (8-pin type) -L - -W (11-pin type) Appearance Rear terminal socket AT8-R8K 8P cap AD8-RC Rear terminal socket AT8-R11K 11P cap ø30 ø ø30 ø1.181 AT8-DP11 M3.5 ø32.5 ø M ø32.5 ø1.280 Dimensions ( ) ø (34.6) (1.362) ø ø30 ø1.181 ø30 ø1.181 Terminal wiring (Top view) Mounting hole dimensions Note: The terminal numbers on the counter and timer are identifical to those on the socket.

4 DIN size / Common 1424 MOUNTING PART (Unit: mm in, Tolerance: ±1 ±0.039) Rubber gasket 50.0 ATC Mounting rails (Applicable for DIN and IEC standards) AT8-DLA1 Length: 1 m ft Aluminum The rubber gasket is enclosed in Applicable for r: PM4H series, series and Counter: series r (except IP50 type): PM4H (screw terminal type) and series Counter: series 1,000 ± ± R 0.8R Oval hole, Front protection cover for DIN 48 size (flexible type): (r) series, QM4H series (Counter) series Mounting frame AT8-DA Fastening plate AT8-DLE The rubber gasket is enclosed in M4 ATA4806 Front protection cover for DIN 48 size (hard type): (Counter) QM4H series Applicable for r: PM4H series, series, QM4H series and Counter: series r (except IP50 type): PM4H (screw terminal type) and series Counter: series For holding DIN rails AFETY LIGHT CURTAIN / AFETY PREURE / UE ENOR OPTION IMPLE UNIT AQM AQM MEAURE- Mounting frame AKW4822 ACCEORIE PM4H series (r) Panel cover (Black) Panel cover A for PM4H-A (R2.1 R0.083) Panel cover for PM4H- 70 ± ± (R2.1 R0.083) R2 R R2 R R2 R0.079 Panel cover M for PM4H-M et ring INTERCE VIION ATC18011 Panel cover W for PM4H-W ATC18014 POWER OFF N RANGE L RANGE RANGE PM4H-A MODE OP PM4H-W series (r) Panel cover (Black) Panel cover for /-L ON OFF ATC18012 Panel cover D for PM4H-D ATC18015 POWER N RANGE L RANGE Panel cover for - RANGE E PM4H- OP PM4H-D ATC18013 Panel cover F for PM4H-F ATC18016 series (Counter) Panel cover (Black) L POWER POWER N RANGE L RANGE Panel cover for /-L (4 digits) PM4H-M MODE OP PM4H-F Panel cover for /-L (6 digits) ATC18001 a set of 2 pcs When you control the fixed time range, the setting rings (a set of 2 pcs.) make it easy to do the time setting and keep the time range all the time. (Excluding PM4H-W) Panel cover for - (4 digits) Panel cover for - (6 digits) Panel cover for -W TIMER TIMER LOCK ET/LOCK LOCK LOCK ET/LOCK ET/LOCK ET/LOCK ATL58011 DOWN ATL68011 DOWN AEL58011 DOWN AEL58012 AEL58013 DOWN AEL58014 The black panel cover is also available so that you can change the appearance of the panel by changing the panel cover. The color of the standard panel cover is ash gray. AEL W

5 1425 1DXM-A/M Multi-range r, 1DX r Common AFETY LIGHT CURTAIN / AFETY PREURE / UE ENOR OPTION IMPLE UNIT MEAURE- INTERCE VIION Accessory (Unit: mm in) Mounting frame (for panel mounting type) ADX18002 (Titanium-gray) ADX18006 (Gray) ADX18007 (Black) Panel cutout dimensions (Note) Board thickness 1 to 3 mm to in Note: Make sure the holes area stays as right angles. Protective cover Cap block Cap for cap block ocket for cap block ADX Terminal socket (Unit: mm in) HC2 slim DIN terminal socket (Uses both wire springs and leaf springs) HC2-FD ADX18011 HC4 socket (Wire spring) HC4--K ADX18004 HJ2 terminal socket HJ2-FD HJ2-FD ADX18003 Use HC2-P-K (2c) or HC4-P-K (4c) for PC board mounting HJ4 terminal socket HJ4-FD HJ4-FD- ocket leaf holding clip (Unit: mm in) ADX18012 AD68002 Appearance Dimensions Appearance Dimensions (2 pieces per set) (2 pieces per set) * Each of ADX18012,AD68002 has two springs ocket line holding clip for 1DXM-A/M (old separately) ADX Application Terminal socket For HC relay For HJ relay HC2-FD- AP3822K AP3882K AP3824K HC4--K HJ2-FD HJ2-FD- HJ4-FD HJ4-FD- Type Common for 1DX, 1DXM-A/M 1DXM-A/M only 1DX only ADX18012 AD68002 ADX28005 (Note 2) ADX18005 (Note 3) : Available, : Not available Notes: 1) The triangles indicate that removal will be slightly difficult when installed laterally in succession. 2) The socket line holding clip (ADX28005) is not included with the 1DXM-A/M timer. 3) The socket line holding clip ADX18005 is enclosed in the 1DX timer. 4) For use where there is a lot of vibration and shock, please use a compliant socket leaf holding clip or socket line holding clip.

6 PMH r 1426 FLUH TYPE (Unit: mm in) Flush type mounting frame Appearance Color Model No Gray N-TF-H-GR Black ilver gray N-TF-H-B N-TF-H-G Gray N-TF-K-GR Black ilver gray Gray N-TF-K-B N-TF-K-G N-TF-YC-GR AFETY LIGHT CURTAIN / AFETY PREURE / UE ENOR OPTION Black ilver gray Gray N-TF-YC-B N-TF-YC-G N-TF-Y-GR IMPLE UNIT MEAURE- Note: The thickness of all applicable panels ranges from 1.0 to 3.5 mm to in. Compact timer protective cover N-TC P cap Rear terminal socket: M AD8-RC ø30 ø1.181 Tolerance: ±1 ±0.039 Applicable for 8-pin type AT8-R8K INTERCE VIION Applicable for the exposed type plug-in and stand-up type timers (PMH) DIN terminal socket: M3.5 Tolerance: ±0.5 ±0.020 When installing the terminal socket AT8-RFD GT pipe socket Terminal pring Approx Tolerance: ±0.5 ± Fixing hole Approx A Mounting rail (Applicable for DIN and IEC standards) AT8-DLA1 Length: 1 m ft Aluminum Fastening plate AT8-DLE AW682

7 1427 A-TB Common AFETY LIGHT CURTAIN / AFETY PREURE / UE ENOR OPTION IMPLE UNIT Mounting parts (Unit: mm in, Tolerance: ±1 ±0.039) Mounting rails (Applicable for DIN and IEC standards) Length: 1 m ft Aluminum AT8-DLA1 Protective cover for DIN 72 size ,000 ± ± R 0.8R Oval hole, Applicable for flat time switch A-TB72 / A-TB72Q MEAURE- AQM7801 INTERCE Fastening plate M4 VIION AT8-DLE ATA4806 For holding DIN rails

8 Counter LC2H ERIE, Meter LH2H ERIE Common 1428 LC2H series OPTION Accessories (for LC2H total counter) Panel cover (black) AEL3801 You can change the design of the front panel by replacing it with this black panel cover. The counter comes with an ash gray panel cover as standard. Note: No panel cover accessory (black) is available for LC2H preset counter. Installation parts (uitable for LC2H total counter* and LC2H preset counter) Mounting frame ATH3803 LC2H Lithium battery (3 V) (for LC2H total counter) Panasonic CR2477 3V JAPAN ATH3802 Make sure the "+" and " " polarities are positioned correctly. Do not throw the old battery into a fire, short circuit it, take it apart, or allow it to come into contact with heat. The battery is not rechargeable. Note: Packaged with LC2H (excluding the PC board mounting type). Rubber gasket (uitable for LC2H total counter* and LC2H preset counter) ATH3804 AFETY LIGHT CURTAIN / AFETY PREURE / UE ENOR OPTION IMPLE UNIT MEAURE- * Packaged with the mounting bracket type LC2H total counter * Packaged with the mounting bracket type LC2H total counter LH2H series OPTION Accessories (for LH2H hour meter) Panel cover (black) HOUR METER LH2H Lithium battery (3 V) (for LH2H hour meter) Panasonic CR2477 3V JAPAN ATH3802 INTERCE VIION ATH3801 You can change the design of the front panel by replacing it with this black panel cover. The counter comes with an ash gray panel cover as standard. Note: No panel cover option (black) is available for LH2H preset hour meter. Installation parts (uitable for LH2H hour meter* and LH2H preset hour meter) Make sure the "+" and " " polarities are positioned correctly. Do not throw the old battery into a fire, short circuit it, take it apart, or allow it to come into contact with heat. The battery is not rechargeable. Note: Packaged with LH2H (excluding the PC board mounting type). Rubber gasket (uitable for LH2H hour meter* and LH2H preset hour meter) Mounting frame ATH3803 ATH3804 * Packaged with the mounting bracket type LH2H hour meter * Packaged with the mounting bracket type LH2H hour meter