ELECTRIC ACTUATOR VALVE

Transcription

1 IS0t4001: :2000 VALVE ON-OFF & CONTROL VALVES (f) w _J 0 a:: t z 0 (J u.. u.. 0 I z 0 w a:: 0 :::> r- (J a:: 1- (J w _J w

2 e Housing e Sealing Hard anodized Aluminum casting and external epoxy powder coated against severe industrial environment. Sealed by 0-ring in all interfaces, and double o-ring sealing for IP68(option) e Lubrication EP type grease, maintenance free service for a long period time e Hand wheel Difference size depending on actuator torque, and knob on hand wheel for easy operation e Gear Precisely machined double worm gear c/w minimum back-lash, low noise, high output torque e Self locking Provided by double worm gearing to keep position of valve unchanged against reverse torque from valve 2 I

3 External mechanical stopper -To prevent over run of travel angle when limit switch fails Cable entries - Standard 2 X PF 3/4" (Max 1") cable entry for various cable gland Manual override -Auto/Manual switch able lever hand wheel engagement for emergency manual operating - Drive force automatically resorted by motor start unless lever padlock to prevent it Removable drive bushing and mounting base - Easy machining for step adaption - Standard IS05211 mounting base (F03- F16)for easy mounting on valve - Large size drive bushing accept large valve stem Terminal block -Specially designed induction motor generate high starting torque and high efficiency equip with thermal protector to prevent damage from over heating Space Heater - Anti-condensation equip with thermal J

4 Captive cover bolt -Cover bolts are captive type designed to prevent loosing during maintenance or installation -All external bolts are stainless steel for rust prevention Torque switches(open/ciose) -To protect actuator from damage caused by overload from the driven valve over the whole travel Potentiometer kit(pk) - High resolution potentiometer and precisely machin ed gearing are directly engaged with drive shaft to feedback continuous position of valve Limit switches -Directly engaged with driving shaft to set accurate position of valve - 1 ea for each travel end (open/close) - Optional Extra Limit Switches (Max 4 ea for each end) Indicator position with arrow supported By spring -Large size position directly engaged with drivin g shaft for better visibility from a distance -Spring loaded underneath keeps set position unchanged unless used move it 4 I

5 e Technicallnformation Rated Duty Model torque cycle Oper. Max Motor Rated current (A) 50/60Hz No of time bore insula- Weight turns 50/60Hz size boo 1Phase I 3Phase I DC Nm % 90' mm dass 110V I 220V I 380V I 440V I 24V 90' Kg..,. Small ATM-Series ATM o9x9 E 0.45/ / N/A 1 ATM / X14 E 0.49/ / / ATM / X17 E 0.92/ / ,. Regular-ATM-Series ATM / F 0.98/ / / / ATM / F 1.60/ / / / ATM / F 1.62/ / / ATM / F / / ATM / F 3.60/ / / / ATM / F 3.90/ / / I 25 ATM / F 3.90/ ATM / F. 2.95/ / ATM / F / / ,. Large ATM-Series ATM / I F. [ 2.95/ ATM9CXXJ / I F / e Standard Specification Enclosure Weatherproof IP67, NEMA 4X and 6, 0-ring sealed (ATM0020&A TM0040:1P66) Main Power supply 24VDC, 110/220VAC/1 Ph/50/60Hz, 380/440VAC/3Ph/50/60Hz ± 10%, (A TM0020&A TM0040: 1 Phase) Control power supply 110/220VAC/1Ph/50/60Hz ±10% Duty cycle (on-off) S2 : 10min-30min Duty cycle (modulating) S4 : 30-50%, start/hour Motor Squirrel cage induction motor Limit switches 2 each for open and close(spdt 250VAC/10A rating) Torque switches 2 each for open and dose(spdt 250VAC/10A rating exoept for ATM0020/0040/0080/0100) Stall protection/set temp. Built in thermal protection, open 150'C ±5'C. dose 97'C ± 15'C Travel angle 90' ± 5' (0'-100' ) Position indicator Continuous mechanical indicator with arrow Manual override De-clutchable (exoept for A TM0020 : N/A, A TM0040 : by shaft, A TM0080 : by wrench) Self locking Provided by double worm gearing (no brake) (exoept for ATM0020/0040/0080) Mechanical stopper 1 each for each travel end (open and dose), external adjustable (except for A TM0020!0040) Space heater 5W(110/220VAC) for anti condensation Cable entries 2-PF3/4 TAP exoept for ATM0020: 1-PG 11, ATM0040:2-PG 13.5, ATM0080:2-M20X 1.5 Lubrication EP type grease Terminal block screw and lever push type( spring loaded) Ambient temperature Basic actuator : -20'C - +70'c except for ATM 0020: -10'c- +65'C o\vcontrol option: -10'c- +60'C Ambient humidity 90%RH Max(Non-<Xl!ldensing) Anti vibration Y:YZ 1 Og Hz, 30 minutes External coating Dry powder(polyester), Blue Color, Munsell No. B-0188 WIVIV.OUIOJIIO.CO.krl5

6 e Options Available IJll> Mechanical Symbol EX WT ALS ATS Description Explosion proof(exd lib T4)/Approved by KTL Watertight(IP68), Temporary submersible/10m Head 1000hours Auxiliary limit switches(max 2 for each travel end) Auxiliary torque switches( Max 2 for each travel end) EXT Extended travel angle(up to 120, 135, 180, 270 ) sv Variation in torque and operating speed I Remark Except for ATM0020/0040/0080 Except for A TM0020/0040/0080 Except for ATM0020/0040 Except for A TM0020/0040/0080/0 100 Except for ATM with Large ATM-Series Please consult before ordering IJll> Remote monitoring and control Potentiometer Kit( output signai:0-1kohm) High resolution potentiometer and precisely machined gearing PK are directly engaged with drive shaft to feedback continuous position of valve Current Transmitter( output signal:4-20ma) CT Zero/Span Adjustment Convertible DIP switch(4 wire to 2 wire) Remote Position Controller(by input and output signal) RPC lnput:4-20ma, 0-10VDC, 2-10VDC, 1-5VDC, 0-5VDC /Signal Output:4-20mA, 0-10VDC, 2-10VDC, 1-5VDC, 0-5VDC configulauon Auto calibration Reverse operating direction PK I >,....,..a.. - Lu:.i CT IJll> Local control LP4 / LM4 LP4 for 1 & 3Phase(ATM ) Control power : Free Voltage(85-265VAC)50/60Hz, Option:24VDC Magnetci slector switches, SMPS(Switching Module Power Supply) :Open/Close & Local/Stop/Remote Local lamp indication :Power-White(on), Remote:Biue(on) :In case of Close Torque Switch Trip- Yellow(on)+Green(flickering:only at Local Position) :In case of Open Torque Switch Trip Yellow(on)+Red(flickering:only at Local Position) :Full Close-Green(on), Closing-Green(flickering:only at Local Position) :Full Open-Red( on), Opening-Red(fl ickering:only at Local Position) LP4 / LM4 * Options Available:PK, CT, RPC(Modulating), IP68, Explosion proof LM4 for 3 Phase(ATM ) Including the same function as LP4 Revesing electric contactors, Transformer 6 lwww.awoma.co.kr

7 llij> Local control ICM1 for 1 & 3 Phase(lntegral Control Module)(ATM ) Main Power: 3Ph 220V/380/440 VAC 1Ph 110V/220VAC Control Power : 24 VDC, 5 VDC Magnetic selector switches :Open/Close & Local/Stop/Remote Reversing electric contactors, Transformer, Phase Detector Local lamp indication :Power-White(on), Remote:Biue(on) :In case of Close Torque Switch Trip-Yellow(on)+Green(flickering) :In case of Open Torque Switch Trip-Yellow(on)+Red(flickering) :Full Close-Green( on), Closing-Green(flickering:only at Local Position) :Full Open-Red(on), Opening-Red(flickering:only at Local Position) :Single & Revese Phasing:(Yellow+Green+Red)all flickering * Options Available: Explosion proof, IP68 ICM1 ICM2 for 1 & 3 Phase(lntegral with LCD Display)(ATM ) Including the same function as ICM1 Reversing electric contactors, Transformer, Phase Detector Auto-PhaseDiscriminator, LCD Display * Options Available:CT, RPC(Modulating), Explosion proof * Options Available:IP68, Bus Communication ICM3 for 1 & 3 Phase(lntegral with LCD Display/IP68 Enclosure)(ATM ) Including the same function as ICM2 Reversing electric contactors, Transformer, Phase Detector Auto-PhaseDiscriminator, LCD Display, IP68, Explosion proof RPC(Modulating), Bus Communication 34pins separate compartment for terminal block llij> Fail Safety BP for 1 Phase(ATM ) ICM2 Rechargeable Battery back up-fail Safe function When main power is alive, actuator works as normally Once power fails, actuator will move to pre-set fail safe position Input power-free Voltage( VAC) 50/60Hz Output contacts:open/ciose/aiarm relay LED signal indication:4 LEDs(Full Open/Close, Over Torque and Power) Rechargeable battery:2.0 AH 27.5 VDC(Ni-Cd) 17

8 e Dimensions 114 r' "1 +-' '$' '-1.,., 160 0> it-'.-- It+-' """"= lli 'r$1' - 69 I Q_ ><-::: b I DP DP25 ATM0020 ATM0040 ATM vww.awoma.co.kr

9 e Dimensions Regular ATM ATM with Gear Box (mm) (mm) ATM0160 ATM0350 ATMOSOO ATM2000 I I TYPE ATM0100 TYPE ATM6000 I ATM9000 ATM0240 ATM0500 ATM1100 ATM3000 I I FLANGE F07 F07 F10 F12 F16 FLANGE F16 IS05211 F10 F12 F c c A M8 M8/M10 M10/M12 M12/M14 M20 A M20 B 14 14/17 17/21 20/25 32 B 32 D (Key) D(Key) 75 D (Squ.) D (Squ.) 0 64 E E 135 F F 245 G G 5 H H 90 s s 170 X X 380 y y 312 z z A B f I 1 r t1=il... ATM0100, ATM0160, ATM0240, ATM0350 ATM0500, ATM0800, ATM1100, ATM2000, ATM3000 ATM6000, ATM9000

10 e Typical Wiring (ATM ) 11 0/220VAC, 50/60Hz, 1 Ph(On-off) 11 0/220VAC, 50/60Hz, 1 Ph( On-off) ATM F 0 AC 85V-265V < WHITE (+) 0 DC 24V 0 AC 24V BLACK(-) AUX. CONTACT POWER MAX. 250VAC 2A i i 11 d IE -=- i OPEN STOP CLOSE I 0 i! i I z 13 8 d " 0 AC I Ph ( V) ATM F ATM0020 ATM /220VAC, 50/60Hz, 1 Ph(On-Off) 11 0/220VAC, 50/60Hz, 1 Ph(Modulating:RPC) AC I Ph ( V) ATMOOS F AC I Ph ( V) ATMOOS F,\UX. CONTACT MAX. 2SOVAC 3A L ATM0080 ATM0080(RPC) WIVIV.OUIOJIIO.CO.krltJ

11 RPC CT BP LP4/LM4/I CM 1/1 CM2 LD2 X y z X y z X y z X y z X y z ATM X X ATM0160/ A TM0350/ ATM0800/ X ATM2000/ X A TM6000/ X o : Installed inside of actuator x : Not available z : Height of basic actuator ATM 0100 ATM o--- ;,;x --.1 RPC X BP >- >- CT X LP4/LM4/ICM 1 /ICM2 LD2 >- X 10 I 1vww.at11oma.co.kr

12 e Typical Wiring (ATM 01 00) 11 0/220VAC, 50/60Hz, 1 Ph(On-Off) 380/440VAC, 50/60Hz, 3Ph(On-Off) AC I Ph ( V) ATMOI F AC 3Ph ( V) U V W CONTROL POWER AC 1PH or DC 24V ATMOI F BASE EARTH ATM0100 ATM01 00(3Ph) 11 0/220VAC, 50/60Hz, 1 Ph(Modulating: RPC) ACIPh( V) ATMOI F CLS: Close Limit Switch (250VAC 10A) OLS: Open Limit Switch (250VAC 10A) ACLS : Aux. Close Limit Switch (250VAC 1 OA) AOLS: Aux. Open Limit Switch (250VAC 10A) ACTS: Aux. Close Torque Switch (250VAC 10A) AOTS: Aux. Open Torque Switch (250VAC 10A) TP: THERMAL PROTECTOR (250VAC 15A OPTION) * Each actuator should be powered through its own individual switch or relay contacts to prevent cross feed between two or more actuators. ATM01 OO(RPC) 121 1vww.at11oma.co.kr

13 e Typical Wiring (ATM ) 11 0/220VAC, 50/60Hz, 1 Ph( On-Off) 380/440VAC, 50/60Hz, 3Ph(On-Off) AC I Ph ( V) ATM F MAIN POWER AC 3PH ( V) uvw ATM F ATM ATM (3Ph) 110/220VAC, 50/60Hz, 1Ph(Modulating:RPC) AC 1Ph( Vl ATM F CLS : Close Limit Switch (250VAC 10A) OLS : Open Limit Switch (250VAC 1 OA) ACLS : Aux. Close Limit Switch (250VAC 1 OA) AOLS: Aux. Open Limit Switch (250VAC 10A) ACTS: Aux. Close Torque Switch (250VAC 10A) AOTS: Aux. Open Torque Switch (250VAC 10A) TP : THERMAL PROTECTOR (250VAC 15A OPTION) * Each actuator should be powered through its own individual switch or relay contacts to prevent cross feed between two or more actuators. ATM (RPC)

14 e Typical Wiring (ATM ) 11 0/220VAC, 50/60Hz, 1 Ph(CT) 11 0/220VAC, 50/60Hz, 1 Ph(CT) AC 1Ph ( V) ATMOI F AC 1Ph ( V) ATM F ATM01 OO(CT CARD) ATM (CT CARD) 380/440VAC, 50/60Hz, 3Ph(CT) ATM F CLS : Close Limit Switch (250VAC 10A) OLS: Open Limit Switch (250VAC 10A) ACLS : Aux. Close Limit Switch (250VAC 1 OA) AOLS: Aux. Open Limit Switch (250VAC 10A) ACTS : Aux. Close Torque Switch (250VAC 10A) AOTS : Aux. Open Torque Switch (250VAC 10A) TP : THERMAL PROTECTOR (250VAC 15A OPTION) Each actuator should be powered through its own individual switch or relay contacts to prevent cross feed between two or more actuators. ATM (CT CARD, 3PH) /4 I 1vww.at11oma.co.kr