Kuhnke Technical Data. Contact Details
|
|
- Erick Greer
- 6 years ago
- Views:
Transcription
1 Kuhnke Technical Data The followg page(s) are extracted from multipage Kuhnke product catalogues or CDROMs and any page number shown is relevant to the origal document. The PDF sheets here may have been combed to provide the fullest possible technical formation about the specific product(s) you have selected. In the origal hard copy catalogues the data may have been more than one section. Hard copy product catalogues, and CDROMs have been published describg Kuhnke Pneumatics, Solenoids, Relays and Electronics; some divided to different books. A list of current publications is available on the ma Kuhnke website or from our sales offices. Contact Details Kuhnke sales and service the UK & Republic of Ireland. H. Kuhnke Ltd Unit 1 Abbey Enterprise Centre Premier Way Romsey Hampshire SO1 9AQ Great Brita T: 44 (0) F: 44 (0) sales@kuhnke.co.uk Website: Worldwide delivery service available. Important Note The formation shown these documents is for guidance only. No liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper application of the parts, assemblies or equipment described.
2 Made 4V P Standard type /, specify order Tw contacts for high contact makg reliability, 4, 6 or 8 C/O possible Large contact gap, switchg voltage therefore 400 V Supplied with blowout magnet for high DC loads Made 4V P Order Code Order code I A 4 4 V DC Type of relay Model A Plug type for socket or soldered connection A C For.8 mm connector, C Bextension required for ENmountg G For prted circuit G I Contact arrangement C/O 4 C/O 4 6 C/O (for DC only) 6 8 C/O (for DC only) 8 Contact material, type of contact Hard silver (no code letter) C AgCdO C F Tw contacts hard silver F G Tw contacts hard silver goldplated G Nomal operation coil voltage (see coil data) 4 V 4 V Coil current type DC Direct current DC AC Alternatg current 0 Hz (60 Hz on request) for IA and IA4 only AC Extensions None (no code letter) M Blowout magnet M B Quickaction fasteng for rail EN003 x 7. (combation M/B not for IA/C) B Kuhnke 30 Relay Catalogue
3 Made 4V P Contact Data I Contact arrangement, 4, 6, 8 C/O Type of contact Sgle contact Tw contact Contact material hard silver AgCdO hard silver hard silver goldplated Nomal contact current 6 A 4 A Inrush current 0 A 10 A Nomal contact voltage 400 VAC, 0 V (with 8 C/O) Max. switchg capacity (resistive) 3000 VA, 000 VA (with 8 C/O) 100 VA M. switchg capacity 0 ma / 0 VDC 0 ma / 0 VDC 0 ma / 10 VDC 1 ma / 100 mv Dimensions, Connection Diagram(s) (C/O) 6 (C/O) 4 (C/O) () 4 31 () 14 () () 34 3 () () () C/O () 4 4. (C/O) 1 A A 1 A A 1. I I... M IG Kuhnke 31 Relay Catalogue
4 Made 4V P General Data Pulltime Dropout time Bounce time Mechanical service life Test voltage Coil contact (C/O) (C/O) Contact contact Insulation group VDE 0110b/.79 Ambient temperature Vibration resistance ( Hz) Weight Operatg range I approx. 1 ms approx. 10 ms approx. 6 ms > 0 x 10 6 switchg cycles DC > 1 x 10 6 switchg cycles AC 00 VAC 00 VAC 1000 VAC C0, B380 C to 60 C DC C to 40 C AC > g approx. 140 g to 180 g DC Class 1 ( U N ) Pull after coil excitation with U N at T U 0 C AC, 0 Hz Class 1 ( U N ) Dropout > 0.0 U N > 0.1 U N Coil Data DC * IA Nom. operation coil power appr. 0.9 W Pull power appr. 0. W AC, 0 Hz * IA Nom. operation coil power appr. 3. VA Inrush current appr.1.7 x nomal current Nomal voltage (V) Nom. resistance (Ω) Nomal current (ma) Nomal voltage (V) Nom. resistance (Ω) Nomal current (ma) *Other voltages on request DC * IA4 Nom. operation coil power appr. 1.7 W Pull power appr. 0.8 W AC, 0 Hz * IA4 Nom. operation coil power appr. VA Inrush current appr. 1.7 x nomal current Nomal voltage (V) Nom. resistance (Ω) Nomal current (ma) Nomal voltage (V) Nom. resistance (Ω) Nomal current (ma) *Other voltages on request DC * IA6 Nom. operation coil power appr. 3.3 W Pull power appr. 1.4 W DC * IA8 Nom. operation coil power appr. 3.3 W Pull power appr. 1.4 W Nomal voltage (V) Nom. resistance (Ω) Nomal current (ma) Nomal voltage (V) Nom. resistance (Ω) Nomal current (ma) *Other voltages on request Kuhnke 3 Relay Catalogue
5 Made 4V P Electrical Service Life Electrical Service Life AC 90 % operatg resistive load ductive load cos ϕ = Service life of contact Service life of contact Switchg capacity VA, 4, 6 C/O 8 C/O Switchg Capability DC without blowout magnet Below limitg characteristic: service life of contacts 1 x 10 6 switchg cycles (90 % operatg) resistive load Switchg capacity VA Switchg current A Switchg voltage V Switchg current A Switchg voltage V, 4, 6 C/O 8 C/O Electrical Service Life DC with blowout magnet, resistive load with, 4, 6 and 8 C/O Switchg current (A) Voltage (V) Service life switchg cycles approx. Voltage (V) Service life switchg cycles approx. Voltage (V) Service life switchg cycles approx x x x x10 6. x x x10 6. x x x *.0 x x *.0 x x * 0.3 x10 6 *not admitted for contuous current Order Specifications for Accessories Relay IA IA4 IA6 IA8 Socket for Z38.0 screw connection with quickaction fasteng Retag clip Z48 Mountg bracket Z8 Z8 Electrical shock protection for Z38.0, pcs. per socket Z38.0 Kuhnke 33 Relay Catalogue
6 Industrial Heavy Duty Relay IH Industrial Heavy Duty Relay IH 1 N/O for 16 A Long service life of contact at high switchg capacity Order Code Order code I H V DC Type of relay I Model H Plug type for socket or soldered connection H Contact arrangement N/O 100 Nomal operation coil voltage (see coil data) 4 V 4 V Coil current type DC Direct current DC AC Alternatg current 0 Hz (60 Hz on request) AC Extensions None (no code letter) B Quickaction fasteng for rail B EN003 x 7. Contact Data Contact arrangement Type of contact Contact material Nomal contact current Inrush current Nomal contact voltage Max. switchg capacity (resistive) M. switchg capacity IH N/O Sgle contact Hard silver 16 A 0 A 400 VAC / DC 4000 VA 0 ma / 0 VDC Kuhnke 34 Relay Catalogue
7 Industrial Heavy Duty Relay IH Dimensions, Connection Diagram(s) 1 0. M A A 1 4 Viewed on termals General Data Pulltime Dropout time Bounce time Mechanical service life Test voltage Coil contact Insulation group VDE 0110b/.79 Ambient temperature Vibration resistance ( Hz) Weight Operatg range IH 100 approx. 1 ms approx. 10 ms approx. 8 ms > 1 x 10 6 switchg cycles 00 VAC C0, B380 C to 7 C DC C to 40 C AC > 4 g approx. 140 g DC Class 1 ( U N ) Pull after coil excitation with U N at T U 0 C AC, 0 Hz Class 1 ( U N ) Dropout > 0.0 U N > 0.1 U N Coil Data * DC *Other coil voltages on request IH 100 Nom. operation coil power approx. 0.9 W Pull power approx. 0. W * IH 100 AC, 0 Hz * Nom. operation coil power approx. VA Inrush current approx. 1.7 x nomal current Nomal voltage (V) Nom. resistance (Ω) Nomal current (ma) Nomal voltage (V) Nom. resistance (Ω) Nomal current (ma) Kuhnke 3 Relay Catalogue
8 Industrial Heavy Duty Relay IH Electrical Service Life Electrical Service Life AC Switchg Capability DC 90 % operatg Below limitg characteristic: service life of contacts resistive load 1 x 10 6 switchg cycles (90 % operatg) ductive load resistive load cos ϕ = Service life of contact Switchg current A Switchg capacity VA Switchg voltage V Order Specifications for Accessories Relay Socket for screw connection with quickaction fasteng Retag clip Mountg bracket IH100 Z38.0 Z48 Z8 Electrical shock protection Z38.0 Kuhnke 36 Relay Catalogue
9 Accessories for Industrial Relay Socket Z38.0 Shown with electrical shock protections ( x Z38.0) 7 39 A Z A Socket Z38.0 Socket design Termal capacity solid conductor flexible conductor with ferrule x. mm x 1. mm Termal designation accordance with EN000 Mountg Rail EN003 x 7./1 Screw termals Head screws metric M4 Torque accordance with DIN EN Nm Nomal current 6 A Insulation group VDE 0110b/.79 C0 Electrical shock protection Electrical shock protection optional x Z38.0 Weight 10 g Retag clip Z48 Mountg Bracket Z Z8 Mountg Weight with screw M3 to relay approx. 11 g Kuhnke 37 Relay Catalogue
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More information4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
More informationIMPULSES FOR AUTOMATION with Universal Relays
NEW IMPULSES FOR AUTOMATION with Universal Relays R 9 GB/99 8.76 7 3 7 6 4 The Universal System is our guarantee to get 6 right twice! 0 8 9 The first 6... () Distinct indication of switch positions, ()
More informationRUC industrial relays of small dimensions
RUC industrial relays of small dimensions 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching
More informationPR - PCB relay. 42 catalog 2002 e / the PR-PCB relay. By using best materials and because of the simple construction the highest failsecurity
PR - PCB relay the PR-PCB relay PCB-Relay from the PR family are small relays. The version has forced guided contacts, 2 normally open contacts, 2 normally closed contacts. In the industrial electronic
More informationRUC-M industrial relays for DC loads
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Min. breaking capacity
More informationVZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data
Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications
More informationALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
More informationPRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
More informationRUC industrial relays of small dimensions
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity
More informationUltra Slim Relays 24
Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest
More informationMicro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
More informationRUC industrial relays of small dimensions
with adaptor (V) with adaptor (H) Power relays of general application AC and DC coils Mounting: in sockets; 35 mm rail mount acc. to PN-EN 60715; on panel; PCB Versions: faston 187 (4,8 x 0,5 mm); faston
More information78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
More informationSafety Relay H-464. Dimensions LxWxH(in mm) Size 3: 77,4 x20,5 x48,6 Size 4: 87,4 x20,5 x48,6
General 8or 10 contacts Forced guided contact set According to EN 50205, application type A Ambient temperature 25 +80 C Soldering heat resistance 260 C/5s RoHS compliance Signal relay according to UIC
More informationJtec 10kA Miniature Circuit Breaker
Jtec 0kA Miniature Circuit Breaker EN 60898 The Jtec range has been enthusiastically adopted by a diverse range of customers seeking a cost effective 0kA performance. Jtec MCBs are available in a wide
More informationSPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
More informationModel Number Structure
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid State Relays G3 @-VD CSM_G3F_G3FD_DS_E_2_1
More informationModel Number Structure
Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
More informationAZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
More informationV REG.-Nr. 3919, Z E214024
General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kv/8 mm coil-contact Reinforced insulation (protection
More informationR15 industrial relays of small dimensions
R15 127 R15 2 C/O R15 3 C/O R15 4 C/O Contact data Number and type of contacts Contact material Max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated
More informationG3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE
Solid State Relay G3NE Compact, Low-cost, SSR Switching 5to20A D Wide load voltage range: 75 to 264 VAC. D Dedicated, compact aluminum PCB and power elements used. D Built-in varistor effectively absorbs
More informationThermal-Magnetic Circuit Breaker 2216-S
Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional
More informationPlug-in relays RH control relays Instantaneous (RHN) and latching (RHK)
Characteristics Instantaneous (RHN) and latching (RHK) Type RHN RHK Environment Classification Standard version EDF, BV, USSR Conforming to standards Standard version IEC 255, NF C 45-25, VDE 435, BS 4794
More informationCS7 Industrial Control Relays
CS7 Industrial Control Relays Reliable, general purpose relays for heavy duty applications The base four pole CS7 relay can be expanded up to twelve poles with the addition of front and side mount auxiliaries
More informationSlim Industrial Relay Type RSLM Electromechanical
Type RSLM Electromechanical RSLM Slim size (width 5mm) High breakdown voltage 4kV (between coil and contacts) Surge voltage up to 6kV (between coil and contacts) Conforms to VDE 0700, 0631 reinforced insulation
More information(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
More informationG3NE. Model Number Structure. Solid State Relays. Model Number Legend. Compact, Low-cost, SSR Switching 5 to 20 A
Solid State Relays CSM DS_E_4_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker
Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.
More informationNote: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
I/O Block Base G7A Reduces Wiring while Providing I/O Flexibility Mount I/O relays and I/O SSRs freely. Electric-shock preventive (finger-touch protection) terminal block incorporated conforming to VDE
More informationWith operation indicators **LY2N-CR **LY2ZN-CR
Bi-power Relays LY E Power-switching Compact General-purpose Relays The standard models include models that are compliant with the UL, CSA, and SEV safety standards and with the Electrical Appliances and
More informationG3B/G3BD. Model Number Structure. Ordering Information. Solid State Relays Model Number Legend. List of Models
Solid State Relays G3@-VD CSM_G3B_G3BD_DS_E_5_1 International Standards for G3B Series, Same Profile as MK Power Relays Shape-compatible with mechanical relays. Certified by UL, CSA, and VDE (models numbers
More informationVEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Control elements Asymmetry Status
More informationProcess displays For current and voltage
Features Voltage input TRMS-AC/DC up to 600 V Current input AC/DC 1 A, 5 A and shunt (precision resistor) 60 or 100 mv With 2 or 4 limits Display range can be linearised Min, Max, Hold functions 4 20 ma
More informationE-STOP relays, safety gate monitors
E-STOP relays, safety gate monitors Up to Category 2, EN 954-1 Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection options for: E-STOP pushbutton Reset button
More informationQUINT-PS/ 1AC/24DC/20/CO
Extract from the online catalog QUINT-PS/ 1AC/24DC/20/CO Order No.: 2320898 DIN rail power supply unit 24 V DC/20 A/CO, dip-coated circuit board, primary-switched, 1-phase. For the first time, SFB (selective
More informationVital. Safety controller. Approvals: Control of: Features: Entire safety system based on the dynamic safety circuit.
Safety controller Vital Approvals: TÜV Nord Vital 1 TÜV Rheinland Vital and 3 Control of: Entire safety system based on the dynamic safety circuit. Features: Vital is based on a single channel safety concept
More informationSafety Switching Devices SNO 4003K. Basic device for Emergency-Stop and Safety Gate Applications PI E
EN 60204-1 Stop category 0 EN 954-1 Safety category 4 Basic device to EN 60204-1 and EN 954-1 single E-stop monitoring. Manual or automatic start Application up to safety category 2 and stop category 0
More informationAC-DC Power Supplies. The PerFormanCe Power PFC250 meets international safety requirements and is CE Marked to the Low Voltage Directive.
AC-DC Power Supplies The PerFormanCe Power PFC250 Series combes Power Factor Correction (PFC) with wide-range outputs to meet the requirements of data counications and dustrial controls. The PFC250-4530G
More informationOTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Product datasheet Characteristics OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Complementary Concept Port Ethernet Bus length Main Number of devices per segment 0...256 Communication
More informationOTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete
More informationCS8 Industrial Control Relays
CS8 Industrial Control Relays Despite increasing complexity, control systems and installations must become increasingly compact. And the CS8 Miniature Relay System packs maximum performance into minimum
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationG3FM. Model Number Structure. Ordering Information. Solid State Relays. Model Number Legend. List of Models
Solid State Relays CSM DS_E_5_3 100-μA-max. Leakage Current, No Bleeder Resistor Required Reduces wiring work by 60% when combined with the PFY-08- PU Push-In Plus Socket (according to actual OMRON measurements).
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationModel Number Structure
Solid State Relays G3@-VD CSM_G3F_G3FD_DS_E_4_2 International Standards for G3F Series, Same Profile as MY Power Relays Shape-compatible with mechanical relays. Certified by UL, CSA, and VDE (model numbers
More informationDPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
More informationTime Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
More informationPSR-SCP- 24DC/SDC4/2X1/B PSR-SPP- 24DC/SDC4/2X1/B
PSR-SCP- 24DC/SDC4/2X1/B PSR-SPP- 24DC/SDC4/2X1/B Safety Relay for Emergency Stop and Safety Door Circuits INTERFACE Data Sheet 102858_02_en PHOENIX CONTACT - 12/2006 Description The PSR-...- 24DC/SDC4/2X1/B
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationG3F/G3FD. Model Number Structure. Solid State Relays Model Number Legend
Solid State Relays G3@-VD CSM_G3F_G3FD_DS_E_5_3 International Standards for G3F Series, Same Profile as MY Power Relays Reduces wiring work by 60% when combined with the PFY-08- PU Push-In Plus Socket
More informationIce Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information...
Ice Cube Relays R2/R4 Plug-in Power Relays... 58 Technical Information... 63 R15 Plug-in Power Relays... 68 Technical Information... 72 RUC Plug-in Power Relays... 76 Technical Information... 79 RY2 Plug-in
More informationPositive-guided relay outputs: 4 safety contacts (N/O), instantaneous
Contact expander module for increasing the number of available contacts Approvals Unit features Positive-guided relay outputs: 4 safety contacts (N/O), instantaneous LED indicator for: Switch status channel
More informationBulletin 700-P, 700DC-P Industrial Relays
Bulletin 700-P, 700DC-P Industrial Relays Bulletin 700 P Direct Drive Convertible Contact Cartridge Relays NEMA and IEC ratings 600V maximum AC/DC Accessories for field installation: contact cartridges,
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Delivery program Contactor relay, 3N/O+1N/C, DC current Part no. DILA-31(24VDC) Catalog No. 276379 Eaton Catalog No. XTRE10B31TD EL-Nummer 4130206 (Norway) Product range DILA relays Application Contactor
More informationE-STOP relays, safety gate monitors
Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection options for: E-STOP pushbutton Reset button LED indicator for: Switch status channel 1/2 Supply voltage See
More informationDEK-REL- 5/I/1. Extract from the online catalog. Order No.:
Extract from the online catalog DEK-REL- 5/I/1 Order No.: 2941183 The illustration shows the version DEK-REL- 24/I/1 Relay terminal block, with soldered-in miniature relays, contact (AgNi +Au): small to
More informationOTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Complementary Concept Port Ethernet Bus length Main Number of devices per segment 0...256 Communication service Web services Discrete
More informationMini Contactors. Mini Contactor Relays 4-pole 20 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 22 Auxiliary Contact Blocks
Mini Contactors Mini Contactor Relays 4-pole 20 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 22 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 24 Mini Contactors
More informationBulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection
Overview/Product Selection Bulletin 700-SH 40 A (resistive) Max. Continuous (Output) Current with Heat Sink 264V AC or 528V AC Max. Voltage Range Options 5 24V DC, 100 120V AC, 200 240V AC Control Input
More information20 General technical data XI/ON
20 General technical data XI/ON General technical information General technical data XI/ON Potential isolation Ambient temperature Operating temperature Storage temperature Relative humidity Noxious gas
More informationAdvantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
More informationRM699B miniature relays
Version (V) Contact data Number and type of contacts Contact material Max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity
More informationThermal-Magnetic Circuit Breaker 4220-T...
Thermal-Magnetic Circuit Breaker 40-T... Description Single, double and three pole thermal-magnetic circuit breakers with high rupture capacity to UL 489 (5 ka), EN/IEC 60934 (6kA) and UL 077 (5 ka). With
More informationTransistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
More informationSafe monitoring relays
monitor for safe standstill monitoring Approvals Block diagram Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous LED indicator
More informationGeneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays
eneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays The Relpol R2N and R4N eneral Purpose Miniature Power Relays, typically called miniature cube type in the industry, offer high reliability and
More informationRhino Redundancy Module PSM24-REM360S. Operating Instructions
Rhino Redundancy Module PSM4-REM360S Operating Instructions RHINO REDUNDANCY MODULE PSM4-REM360S Description With this module and two power supplies of the PSM series (78, 90, 56, 80 and 360 watt models),
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationControl relays. K mini-control relays. Conforming to standards IEC/EN , , NF C , VDE 0660 UL, CSA, DEMKO, NEMKO, SEMKO
Characteristics Environment Conforming to standards IEC/EN 0947-1, 0947-5-1, NF C 3-140, VDE 00 Approvals UL, CSA, DEMKO, NEMKO, SEMKO Vertical axis Horizontal axis Operating position 180 Without derating
More informationOTB1S0DM9LP I/O distributed module OTB - Modbus non isolated serial link m
Characteristics I/O distributed module OTB - Modbus non isolated serial link - 0..10 m Complementary Topology Bus length Main Number of devices per segment 0...32 Data format Parity Discrete input voltage
More informationPSR-SCP- 24DC/URM4/4X1/2X2/B PSR-SPP- 24DC/URM4/4X1/2X2/B
Safety Relay as a Contact Extension Block INTERFACE Data Sheet PHOENIX CONTACT - 05/2006 Description The PSR-...- 24DC/URM4/4X1/2X2/B safety relay can be used as a contact extension block in safety circuits
More informationContacts Contact Arrangement. 8-Pole Relay. 12-Pole Relay
Bulletin -P Heavy-Duty Industrial s Product Selection DC-Operated s Rail Mount DIN Rail Mount Cat. No. Cat. No. -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD DC Coil
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationOTB1C0DM9LP I/O distributed module OTB - CANopen bus m
Characteristics I/O distributed module OTB - CANopen bus - 0..1000 m Main Range of product Product or component type Integrated connection type Bus type Jan 28, 2018 Modicon OTB I/O distributed module
More informationG3H/G3HD. Model Number Structure. Solid State Relays Model Number Legend
Solid State Relays G@-VD CSM_GH_GHD_DS_E_6_ New Models with International Standards Added to GH Series (-VD in model number). Same Profile as LY and LY Bi-power Relays Certified by UL, CSA, and VDE (models
More informationTeSys contactors From 115 to 2750 A
Selection guide From to 0 A Applications Control of all types of motor for standard or severe duty applications Control of resistive, inductive and capacitive circuits: heating, lighting, cos j rectification,
More informationTemperature Controller E5C4
Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers
More informationElectronic timer CT-ERD.12
2CDC 251 092 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationOTB1C0DM9LP I/O distributed module OTB - CANopen bus m
Characteristics I/O distributed module OTB - CANopen bus - 0..1000 m Complementary Topology Main Range of product Product or component type Integrated connection type Bus type Number of slave 0...63 Bus
More informationSafety Relay Unit (I/O Unit Type)
Safety Relay Unit (I/O Unit Type) CQM1-SF200/ CS1W-SF200 Same Dimensions as I/O Unit Less Installation Space and Wiring Required Safety Relay Unit that can be used as an I/O Unit for OMRON s CQM1H and
More informationSlim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
More informationOTB1C0DM9LP. Main , length of segment <= 185 m , length of segment <= 160 m. 3.4 kohm for I8...I kohm I0...I1 5.7 kohm I6...
Product datasheet Characteristics OTB1C0DM9LP Complementary Topology Number of slave 63 Bus length Number of devices per segment Discrete input voltage Discrete input voltage type Discrete input type Input
More informationPower supply CP-C 24/5.0
2CDC 271 064 F0004 Features Supply voltage ranges: 85-264 V AC, 100-350 V DC Output voltage adjustable from 22-28 V DC, default setting 24 V DC 0,5 % 5 A output current Open-circuit, overload and continous
More informationSRT2-ROC08, SRT2-ROC16
Ultra-miniature 8-point and 16-point Relaymounted Terminals Ultra-compact (8-point models: 101 x 51 x 51 mm (W x H x D); 16-point models: 156 x 51 x 51 mm (W x H x D)) MOS FET Relay and Relay models. DIN
More informationmust Operate Voltage (V)
force-guided relays g7sa G7SA compact, Slim relays conforming to en Standards Relays with forcibly guided contacts (EN50205 Class A, certifi ed by VDE) Supports the CE marking of machinery (Machinery Directive)
More informationInterface Relay CRINT-1x
Interface Relay CRINT-1x 1 Features Space saving interface relay to combine with PLCs Coil voltage UC12, 24, 48, 60, 110-125, 220-240V Integrated protection circuit Relay is replaceable separately Available
More information3 Pole Contactors with AC operating coils
1 3 Pole Contactors with AC operating coils Characteristics General Characteristics Switching Current 9A ~ Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 IEC 60947-4 V 1000 Conforming to
More informationSolid State Remote Power Controller E /627
Solid State Remote Power Controller E--623/62 Description The E-T-A Solid State Remote Power Controllers E--623/62 are electronic control modules suitable for inductive loads such as electromagnetic valves
More information02/11/2015
DIN Rail Mount 22.5 mm ETM2 Part number 84874023 Version ETM : Controls temperature of machines using built-in PTC probes Line break or probe short-circuit detection Version ETM2 / ETM22 : Fault latching
More informationIELR Series
IELR Series Rail-Mount Magnetic Circuit Protectors Introduction Poles Specifications Operating Characteristics Delay Curves Approvals Decision Tables 6 62 63 64 65 69 70 IELR Series Rail-Mount Hydraulic
More informationGT3F Series True OFF Delay Timers
TF Series TF Series True OFF Delay Key features of the TF series include: Mountable in sockets or flush panel True power OFF-delay up to 10 minutes No external control switch necessary Available with reset
More informationTeSys IEC Contactors and Overload Relays
TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the
More informationControl elements. Fine adjustment. Status indication. 24 V DC typ. 0,25 W / 0,25 VA. 24 V DC typ. 0,03 W / 0,09 VA. 0,15 3 s. 0,5 10 h.
On-Delay 10 time ranges Supply voltage 24-240V AC/DC 1 change-over contact Width 22,5mm Control elements Fine adjustment Setting of time range Status indication LED U/t: Supply voltage LED R: Relay status
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 5 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Connection
More information