EMC PARTNER. ESD MODULAR HANDHELD TESTER Electrostatic Discharge Testing
|
|
- Felix Perry
- 6 years ago
- Views:
Transcription
1 EMC PARTNER ESD MDULAR HANDHELD TESTER Electrostatic Discharge Testing
2 Accredited Calibration Quality at EMC PARTNER is based on an IS 9001 management system. This is the foundation for an IS accreditation verified by the Swiss Calibration Service (SCS). SCS No. 146 is the accreditation number of EMC PARTNER AG. Locally accredited but recognized worldwide through affiliation with the ILAC organisation
3 THE ESD TESTING SLUTIN PWER AT YUR FINGER TIPS WESHALB BRAUCHT ES EINEN STYLE GUIDE? Electrostatic Discharge (ESD) is the most common test procedure applied to any electronic or electrical equipment. Used extensively to test: Commercial products Industrial systems Military electronics Automotive electronics Fuses and detonators Railway electronics Avionic equipment qualification Telecom equipment Electronic components The easily changeable and fully calibrated discharge networks, quickly adapt ESD3000 to the requirements of any new application. Light and easy to use. 3
4 EASILY EXPANDABLE ESD3000 is designed with the user in mind. The modular design allows configuration according to customer wishes, addition of more networks when adding applications and easy extension from 16kV to 30kV using the same generator. Automatic network recognition means ESD3000 is always ready. ESD DMx ESD DNx Discharge Modules (DMx) Discharge Networks (DNx) up to 16kV Air / 10kV Contact Discharges up to 30kV Air- and Contact Discharges ESD3000 required Available Extensions DM1 (150pF, 330 hm) DM2 (330pF / 2000 hm) DM4 (100pF / 1500 hm) DM6 (100pF / 1500 hm) DM7 (200pF / 0 hm) Rechargable Long-life battteries Up to 3 test tips (Sharp, Round, Corona) Charger & Firmware update cable Handy, robust carrying case 4 + RM32 ESD3000 & RM32 required Available Extensions DN1 (150pF / 330 hm) DN2 (330 pf, 2000 hm) DN3 (150 pf, 2000 hm) DN4 (500 pf, 5000 hm) DN5 (500 pf, 500 hm) DN6 (330 pf, 330 hm)
5 AVAILABLE MDULES Commercial & Industrial IEC / ITU-T K.44 ESD3000DM1 (150pF, 330 hm) ANSI / IEEE C63.16 ESD3000 DM16A-C63H (150pF / 330 hm) ESD3000 DM16C-C63H (150pF / 330 hm) UL 991 ESD3000DM32A-UL991 (100pF / 1000 hm) Component Test IEC / JEDEC 22-A114 / MIL-STD-750D ESD3000DM6 (100pF / 1000 hm) IEC / JEDEC 22-A115 ESD3000DM7 (200pF / 0 hm) Automotive PSA B ESD3000DM2 (330pF / 2000 hm) IS / SAEJSSI-IS/FRD AB/AC /GMW 3097 ESD3000DN1(150pF / 330 hm) ESD3000DN2 (330pF / 2000 hm) ESD3000DN3 (150pF / 2000 hm) IS ESD3000DN6 (330pF / 330 hm) JAS D ESD3000DN32-CAR1 (150pF / 500 hm) Renault /D and /A ESD3000DN32-CAR5 (330pF / 0 hm) Military MIL-STD-883 / GR78-CRE ESD3000DM4 (100pF / 1500 hm) STANAG 4239 / IS / MIL-STD-1512 ESD3000DN4 (500pF / 5000 hm) MIL-STD-331C / MIL-DTL-23659D / STANAG 4239 ESD3000DN5 (500pF / 500 hm) MIL-STD-1576 ESD3000DN32-MIL2 (400pF / 150 hm) ESD3000DN32-MIL3 (500pF / 0 hm) 5
6 UNIQUE FEATURES The original 30kV battery powered generator with a unique system of changeable modules. Flexibility and power combined. 6 AA battery powered Electronic polarity change Long life standard battery. Up to 8 hours on full battery charge. Readily available in any store. Single key press switches polarity before and during the test. Extend testing capability Compact solution Add calibrated modules to maintain the system value. Unique modules and accessories for special applications. Ergonomic hand held tester without additional base unit. Program directly on generator.
7 Technical Specifications 7
8 JEDEC 22-A114 MIL-STD-750D IEC JEDEC22-A115 IS D-160 S25 MIL-STD-461G CS118 GMW3100 GMW3097 STANAG4239 IS14304 MIL-STD-1512 MIL-STD-330C JAS D Renault /D ABD Special MIL MIL-STD-1576 ANSI C63.16 UL991 8 C-63H UL991 A-C63H MIL3 IEC MIL2 IND1 CAR5 GR78-CRE CAR1 DN6 DN5 MIL-STD-883 DN4 DN3 PSA B DN2 DN1 RM32 ITU-T K20 DM7 DM6 DM4 DM1 IEC ESD3000 DM2 Mainframe ESD3000 MDULES
9 CAR5 IND1 MIL2 MIL3 A-C63H IEC IEC ESD-VCP50 IEC IEC ESD-TARGET2 IEC ESD-TARGET2 DN ESD-VERI-V ESD-STAND ED2 ESD-HCP-AUT DM-EXT MIL MIL SAFETY-S MIL MIL TC-MIG24 ED MIL MIL ESD3000 CNH12 PTLINK TEMA C-63H CAR1 EARTH CABLE DN6 DN5 DN3 IS DN4 DN2 IS DN1 IS RM32 DM7 DM6 DM4 DM2 DM1 ESD3000 Mainframe ACCESSRIES FR DIFFERENT MDULES IS IS IS = ptional Accessories, see product details verview ESD3000 Modules Accessories 9
10 1. ESD3000 MAINFRAME AND MDULES 1.1. TECHNICAL SPECIFICATINS ESD3000 Mainframe To be used with modules Construction Control Maximum voltage Voltage steps Discharge polarity Discharge modes Discharge frequency CD Discharge frequency AD Counter Discharge detection Holding time Trigger Ramps Reporting with TEMA Dimensions mainframe equipped Power supply all modules from this document are compatible fully portable, no additional basic unit LCD and 6 menu buttons, 1 trigger button 16 kv or 30 kv, depending on modules chosen 100 V - test positive, negative, alternating contact discharge (CD) and air discharge (AD) max. 20 Hz, (pulse every 0.05, 0.1, s) 30 Hz or more, for ex. with DM1, DN1, other pre-selectable, 1 to selectable, count pulses or count discharges 5s manual, automatic, remote voltage, polarity automatic report sequence, amplitude, polarity for ex. with DM1 and tip 340 x 130 x 70 mm 730 g, w/o battery pack and module 1050 g, with battery pack, DM1 and AD tip 10 x AA rechargeable batteries or mains 10 batteries, mains adapter, ground cable 2 m, 3 test tips (AD, AD2, CD), carrying case, RS232 cable, E3Loader for remote control at least a DM module, or a DN module + RM32 ESD3000DM1 ther standards Current rise time into 2 Ω First I peak into 2 Ω CD Current at 30 ns Current at 60 ns ptional verview 10 IEC (latest), ITU-T K.20, MIL-STD-461G CS118, D-160 Section pf ± 10 % 330 Ω ± 10 % kv ± 5 % kv ± 5 % 0.8 ± 25 % kv kv (± 15 %) 4 2 kv kv (± 30 %) 2 2 kv kv (± 30 %) ESD-TARGET2 ESD3000 Modules Accessories
11 ESD3000DM2 Current rise time into 2 Ω First I peak into 2 Ω CD RC time constant PSA B up to 16 kv / 10 kv 330 pf ± 10 % 2000 Ω ± 10 % kv ± 5 % kv ± 5 % ns A ± 10 % 600 ± 130 ns ESD3000DM4 Current rise time into 2 Ω I peak into 2 Ω (CD) MIL-STD-883, GR78-CRE 100 pf ± 10 % 1500 Ω ± 10 % kv ± 5 % kv ± 5 % < kv kv, kv ESD3000DM6 Current rise time into 2 Ω RC time constant IEC , JEDEC 22-A114,MIL-STD-750D 100 pf ± 10 % 1500 Ω ± 10 % kv ± 10 % kv 150 ± 20 ns ESD3000DM7 Current into short circuit Current waveform Current ringing frequency IEC , JEDEC 22-A pf ± 10 % 0 Ω ± 10 % kv ± 5 % 1. 7 A 35 A ± 15 % into short circuit (< 1 Ω) as per IEC into SC (< 1 Ω) kv into SC (< 1 Ω) ESD3000DM32A-UL991 Standard Discharge mode Rise time at 4 kv, 20 kv RC const. at 4 kv, 20 kv verview UL991, paragraph pf ± 10 % 1500 Ω ± 5 % AD only, consists of DM+ and DM- modules 4 30 kv ± 5 % < 5 ns 150 ns ± 20 % ESD3000 Modules Accessories 11
12 30 KV These Extensions need the Module ESD3000RM32 ESD3000DN1 ther standards Current rise time into 2 Ω First I peak into 2 Ω CD Current at 30 ns Current at 60 ns in ESD3000RM32 ptional IEC , IS MIL-STD-461G CS118, D-160 Section pf ± 10 % 330 Ω ± 10 % 1 32 kv ± 5 % 1 30 kv ± 5 % 0.8 ± 25 % kv kv (± 15 %) 4 2 kv kv (± 30 %) 2 2 kv kv (± 30 %) ESD3000RM32 Detachable module for faster tr (<700ps) ESD-TARGET2 DN, ESD-HCP-AUT ESD3000DN2 Current rise time into 2 Ω First I peak into 2 Ω CD RC time constant ptional IS 10605, GMW3100, GMW pf ± 10 % 2000 Ω ± 10 % ns kv kv (- 0 / + 30 %) 600 ± 130 ns ESD3000RM32 ESD-TARGET2 DN ESD3000DN3 Current rise time into 2 Ω First I peak into 2 Ω CD RC time constant ptional verview 12 IS 10605, GMW3100, GMW pf ± 10 % 2000 Ω ± 10 % ns kv kv (- 0 / + 30 %) 300 ± 60 ns ESD3000RM32 ESD-TARGET2 DN ESD3000 Modules Accessories
13 ESD3000DN4 I rise time into 2 Ω CD ptional STANAG4239, IS14304 MIL-STD-1512, MIL-STD pf ± 10 % 5000 Ω ± 10 % ns ESD3000RM32 ESD3000 SAFETY-S, DM-EXT, TC-MIG24ED ESD3000DN5 I rise time into 2 Ω CD ptional STANAG4239, MIL-STD-1512, MIL-STD pf ± 10 % 500 Ω ± 10 % ns ESD3000RM32 ESD3000 SAFETY-S, DM-EXT, TC-MIG24ED ESD3000DN6 Current rise time into 2 Ω RC time constant ptional IS 10605, GMW pf ± 10 % 330 Ω ± 10 % ns 300 ± 130 ESD3000RM32 ESD-TARGET2 DN, ESD-HCP-AUT SPECIAL ESD3000DN32-CAR1 Standard I rise time into 2 Ω CD First I peak into 2 Ω AD RC time constant ptional verview JAS D pf ± 10 % 500 Ω ± 10 % 2 30 kv ± 10 % 2 30 kv ± 10 % 0.8 ± 25 % < 5 ns 300 ± 60 ns ESD3000RM32 ESD-TARGET2 DN ESD3000 Modules Accessories 13
14 ESD3000DN32-CAR5 Standard Source impedance Rt Renault /D testing airbag initiators 330 pf ± 10 % 0 Ω ± 10 % < 30 Ω 2 16 kv ± 5 % 2 16 kv ± 5 % the module is already integrated in RM32 ESD3000DN32-IND1 Standard I rise time into 2 Ω CD RC time constant ABD , IEC pf ± 10 % 150 Ω ± 10 % ns 30 ns ± 30 % ESD3000RM32 ESD3000DN32-MIL2 I rise time into 2 Ω CD special military requirement 400 pf ± 10 % 150 Ω ± 10 % 0.8 ± 25 % ESD3000RM32 ESD3000DN32-MIL3 Standard MIL-STD pf ± 10 % 0 Ω ± 10 % ESD3000RM32 ESD3000DM16A-C63H Standard verview 14 ANSI C63.16 (AD requirement) 150 pf ± 10 % 330 Ω ± 10 % 2 16 kv ± 5 % - ESD3000 Modules Accessories
15 ESD3000DM16C-C63H Standard ANSI C63.16 (CD requirement) 150 pf ± 10 % 330 Ω ± 10 % 2 16 kv ± 5 % PWER, CLIMATIC CNDITINS, SHIPPING WEIGHT, DIMENSINS ESD3000 mainframe Mains adapter Power consumption V (50/60 Hz) N < 20 VA, standby < 5 VA Temperature range Humidity Air pressure C % non-condensing kpa Shipping weight Carrying case dimensions 2.4 kg plus selected modules 46 x 41 x 17 cm in delivery User manual Calibration certificate with conformity declaration factory calibration for selected modules 2. ACCESSRIES FR ESD TECHNICAL SPECIFICATINS EARTH CABLE Impedance Length Connectors verview connection of HCP or VCP to ground plane 2 x 470 kω 2m 2 x banana plugs ESD3000 Modules Accessories 15
16 ESD-VCP50 Spacer in between Coupling plane points Dimensions indirect ESD application as per standard 10 cm wooden spacer 50 x 50 cm one on each side 50 x 50 x 10 cm 8 kg 2 m earth cable (with 2 x 470 kω) ESD-TARGET2 Standard Input impedance Input voltage Frequency range Current range Transfer function Diameter Thickness Fixing IEC latest current target for calibration of ESD generator 2Ω max. 10 kv CD ± 0.5 db up to 1 GHz, ± 1.2 db up to 4 GHz 0 50 A standard, could be extended 0.2 V / 1 A with 20 db 70 mm 40 mm 398 g including attenuator 8 x M3 screws, included in delivery 20 db att., 50 Ω coax. cable (1 m) with SMA out ESD-TARGET2 DN Standard Input impedance Input voltage Frequency range Current range Transfer function Diameter Thickness Fixing IEC latest current target for calibration of ESD generator 2Ω max. 30 kv CD ± 0.5 db up to 1 GHz, ± 1.2 db up to 4 GHz A standard, could be extended 0.2 V / 1 A with 20 db, 0.02 V / 1 A with 40 db 70 mm 40 mm 398 g including attenuator 8 x M3 screws, included in delivery 40 db att., 50 Ω coax. cable (1 m) with SMA out ESD-VERI-V Input impedance Input voltage range utput voltage range utput connector Dimensions verview 16 target for ESD DC voltage measurement 20 GΩ 3 pf 0 32 kv V BNC 17 cm height, 5.5 cm diameter 433 g earth conductor ESD3000 Modules Accessories
17 ESD-STAND Ed2 Height Position Dimensions stand for supporting ESD gun, fixed point test cm, adjustable 360 adjustable 64 x 17 x 12 cm (packed) 4 kg cable holder for calibration ESD-HCP-AUT Length Insulation distance Test level Dimensions coupling plane as per IS annex F 1500 mm 50 mm 8 20 kv, as per standard 180 x 120 x 5 cm 2.2 kg EARTH CABLE ESD3000DM-EXT Compatibility Cable length Can be used with 1 m extension cable for ESD3000 modules DM and DN modules 1 ± 0.05 m 0.5 kg including accessories DN modules ESD3000 SAFETY-S Standard Voltage Dimensions To be used with MIL-STD-1512 safety switch for testing explosive devices max. 30 kv CD 20 x 16 x 12 cm 2 kg including accessories mains adapter ESD3000DM-EXT, TC-MIG24 ED TC-MIG24 ED for testing explosive devices Voltage insulation EUT dimensions EUT weight Safety circuit Signal lamps Control of signal lamps Dimensions verview test cabinet max. 36 kv max. 30 x 30 x 20 cm max. 5 kg door interlock red and green lamps built-in for example with ESD3000 SAFETY-S 47 x 43.5 x 25.4 cm 8 kg connection cable 25pol/ESD3000 SAFETY-S ESD3000 Modules Accessories 17
18 ESD3000 CNH12 Loop diameter Loop current allowed Discharge mode selection Current at 15 kv setting Current at 30 kv setting Dimensions Magnetic field loop for ESD3000 test system 12 cm > 100 A contact discharge (CD) 50 A, with RM32 and DN1 108 A, with RM32 and DN1 33 x 13 x 1 cm 0.2 kg including accessories ESD3000RM32, ESD3000DN1 or other DN ESD3000-PTLINK Length Interface Baud rate (insulating) optical cable ESD computer 10 m RS232, requires USB adapter 9600 bps 0.2 kg tranceiver with mains adapter USB-RS 232 ADAPTER USB-RS232 ADAPTER Adapter type Input utput Cable length adapter between RS232 and USB interfaces Passive, no power supply RS232 male USB 0.35 m 0.2 kg TEMA License Capabilities with ESD3000 Compatibility verview 18 control software for ESD3000 system 1 license for 1 generator Sequences, reporting, remote control Windows XP, 7, 8, 10 ESD3000-PTLINK, USB-RS 232 ADAPTER ESD3000 Modules Accessories
19
20 For further information please do not hesitate to contact your local EMC PARTNER AG representative. Visit our website for more information and contact details. For further information please do not hesitate to contact your local EMC PARTNER AG representative. Your will find a complete list of representatives on our website Swiss Headquarters Your local representative EMC PARTNER AG Baselstrasse 160 CH Laufen Phone Fax Web sales@emc-partner.ch Information and specifications in this document are an indication of capability only. Version 1.2.Subject to change without notice. The English text is the only binding version of this document. Translation into other languages is not guaranteed to be a true representation of content or specification. by EMC PARTNER AG. No changes or reproduction without permission of EMC PARTNER AG allowed.
EMC PARTNER. ESD MODULAR HANDHELD TESTER Electrostatic Discharge Testing
EMC PARTNER ESD3000 - MDULAR HANDHELD TESTER Electrostatic Discharge Testing This document has been optimized for electronic media Accredited Calibration Quality at EMC PARTNER is based on an IS 9001 management
More informationESD Test System. Immunity Tests
Immunity Tests ESD Test System Overview of Phenomena 3 Features & Benefits 4 Applications 6 Technical Specifications 8 Accessories and Options 12 Software 14 EMC PARTNER s Product Range 15 Immunity Tests:
More informationELECTROSTATIC DISCHARGE SIMULATOR
ELECTROSTATIC DISCHARGE SIMULATOR Designed by HIGH VOLTAGE TEST SOLUTIONS 2 ONYX SUMMARY The ONYX is a state of the art electrostatic discharge simulator available in 16 kv or 30 kv versions. It is the
More informationMIL3000 Test System. Lightning Tests
Lightning Tests MIL3000 Test System System Overview.................... 2 Applicable Standards................... 3 Features & Benefits................... 4 Application Options................... 6 Accessories......................
More informationTechnical Specification
EMC TESTS, SEMINARS, HARD AND SOFTWARE Technical Specification No. E-MIG1206-3P.doc Revised: 10.March 2007 1 MIG Tester Type MIG1206-3P 1 MIG Tester Type MIG1206-3P 1 1.1 Introduction 1 2 General 2 2.1
More informationEMISSION MEASUREMENT Power Frequency Testing
EMISSION MEASUREMENT Power Frequency Testing This document has been optimized for electronic media POWER FREQUENCY TESTING QUALITY AND RELIABILITY OF THE POWER NETWORK The power network is an essential
More informationTotal Coordinator for EMC 00% 90% 30ns. 60ns 10% 30ns ELECTROSTATIC DISCHARGE H SIMULATOR. NOISE LABORATORY CO., LTD.
Total Coordinator for EMC I 00% 90% 30ns I1 60ns 10% 30ns ESS S-2000 ELECTROSTATIC DISCHARGE H SIMULATOR M www.noiseken.com Rc Rd Cs ESS-2001 NOISE LABORATORY CO., LTD. Your products may have passed the
More informationMilitary Test System. Lightning Tests
Lightning Tests Military Test System System Overview.................... 2 Features & Benefits................... 4 Applications...................... 6 Applicable Standards................... 7 Technical
More informationAVI3000 Test System. Advanced Test Equipment Rentals ATEC (2832) Lightning Tests
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Lightning Tests AVI3000 Test System AVI3000 Test System Overview 2 Features & Benefits 4 Applications of AVI3000 6 Applicable
More informationCapacitor Test System
Component Tests Capacitor Test System Brief Overview of Phenomena............... 2 Applicable Standards................... 2 Test System Overview.................. 3 Generator Specifications.................
More informationElectrostatic Discharge Simulator. user manual
Electrostatic Discharge Simulator user manual i A Note to Begin Thank you for choosing the Haefely ONYX to meet your ESD testing needs. Please take a little time to read through this user manual and familiarize
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Your products may have passed the test standards, but can they survive in the real world? There are many ESD standards
More informationEMC PARTNER EMC PARTNER AG COMPANY PROFILE
EMC PARTNER EMC PARTNER AG COMPANY PROFILE Accredited Calibration Quality at EMC PARTNER is based on an ISO 9001 management system. This is the foundation for an ISO 17025 accreditation verified by the
More informationComplimentary Reference Material
Complimentary Reference Material This PDF has been made available as a complimentary service for you to assist in evaluating this model for your testing requirements. TMG offers a wide range of test equipment
More informationESS-2000 with Discharge gun TC-815P
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) ELECTROSTATIC DISCHARGE SIMULATOR ESS-2000 with Discharge gun TC-815P CONFORMING TO IEC 61000-4-2 R TC-815P ESS-2000
More informationFOR DIRECT, INDIRECT & DIAGNOSTIC ESD TESTING
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) MINIZAP FOR DIRECT, INDIRECT & DIAGNOSTIC ESD TESTING Practical, Reliable Electrostatic Discharge Testing from R & D
More informationSurge Current Generators PG **-****
Surge Current Generators PG **-**** Waveform 8/20 µs Surge current: 40 ka - 100 ka The surge current generators PG **-*** generate standard impulse currents with waveform 8/20 µs according to IEC, EN,
More informationProtection Device Test System
Component Tests Protection Device Test System Brief Overview of Phenomena................ 2 Applicable Standards................... 3 Test System Overview................... 4 Generator Specifications.................
More informationKeyTek ECAT. Expert Computer-Aided Testing for pulsed EMI immunity. Technical Specifications
KeyTek ECAT Expert Computer-Aided Testing for pulsed EMI immunity The KeyTek ECAT is a modular, full capability EMC test system for measuring and analyzing the vulnerability of telecom, electronic, and
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) compact immunity test system www.axos.haefely.com a brand of Haefely is a subsidiary of Hubbell Incorporated. 2 AXOS
More informationESD Simulator System. Top Class ESD Simulation NSG 438.
ESD Simulator System Top Class ESD Simulation NSG 438 www.schaffner.com NSG 438 ESD Simulator System Top class ESD simulation Air and contact discharge 200V to 30kV Touch panel display controlled Battery
More informationIntroduction. Aspects of System Level ESD Testing. Test Environment. System Level ESD Testing Part II: The Test Setup
System Level ESD Testing Part II: The Test Setup Introduction This is the second in a series of articles on system level ESD testing. In the first article the current waveform for system level ESD testing
More informationUser s Guide. RP7000S Series Single-Ended Active Probe. Nov RIGOL Technologies, Inc.
User s Guide RP7000S Series Single-Ended Active Probe Nov. 2013 RIGOL Technologies, Inc. Guaranty and Declaration Copyright 2013 RIGOL Technologies, Inc. All Rights Reserved. Trademark Information RIGOL
More informationAVI3000. Indirect lightning test system L3+ The best just got better!
AVI3000 Indirect lightning test system L3+ The best just got better! EMC PARTNER AG Founded in 1994 Swiss private company, headquarters in Laufen Largest choice of impulse generators Market leader, recognized
More informationAutomotive Electronics Council Component Technical Committee
ATTACHMENT 11 CHARGED DEVICE MODEL (CDM) ELECTROSTATIC DISCHARGE TEST Acknowledgment Any document involving a complex technology brings together experience and skills from many sources. The Automotive
More informationTANDO 700. High-precision measuring and analysis system for dissipation/power factor and capacitance
TANDO 700 High-precision measuring and analysis system for dissipation/power factor and capacitance High-voltage insulation testing made safe, easy and reliable Why dissipation/power factor and capacitance?
More informationMilitary Test System. Lightning Tests
Lightning Tests Military Test System Brief Overview of Phenomena................ 2 Applicable Standards................... 3 Test System Overview................... 4 Generator Specifications..................
More informationTT-SI 50 50MHz DIFFERENTIAL PROBE USER S MANUAL
TT-SI 50 50MHz DIFFERENTIAL PROBE USER S MANUAL This probe is in compliance with IEC-1010.1, IEC-1010.2-031 CAT I or CAT II, Pollution Degree 2. 1. Safety Terms and Symbols Terms appear in this manual:
More informationRT4F-110V/25A RECTIFIER
The RT4F-110V/25A is a hot-pluggable switched mode rectifier (SMR) module designed to provide up to 25A of output current into a 110V nominal system. Examples of such systems are 60 cells lead acid (136V
More informationManual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.
Manual Title: Supplement Issue: 8 Part Number: 1625019 Issue Date: 9/17 Print Date: October 2011 Page Count: 12 Revision/Date: 11 This supplement contains information necessary to ensure the accuracy of
More information38 MHz Passive Voltage Probe R&S RT-ZP1X
Manual 38 MHz Passive Voltage Probe R&S RT-ZP1X 1333.1370.02 Printed in Germany Test and Measurement 2 Manufacturer ROHDE & SCHWARZ For comprehensive information about Rohde and Schwarz, please visit our
More informationOPERATION MANUAL ESD - GENERATORS
OPERATION MANUAL ESD - GENERATORS SESD 216 SESD 230 OPERATION MANUAL ELECTROSTATIC DISCHARGE GENERATORS SESD 216 SESD 230 16,5 kv 30,0 kv Warning: This unit generates high voltages and is inherently dangerous.
More informationPESD5V0X2UM. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data
Ultra low capacitance unidirectional double ESD protection diode 3 February 2014 Product data sheet 1. General description Ultra low capacitance unidirectional double ElectroStatic Discharge (ESD) protection
More informationSingle Source, Total EMC Test Solutions
Single Source, Total EMC Test Solutions Experience the many benefits of working with recognized experts in the field of EMC (Electromagnetic Compatibility) testing. Our commitment to the discipline is
More informationPHOENIX CONTACT - 07/2006
Buffer module with maintenance-free capacitor-based power storage device INTERFACE Data sheet 102035_03_en PHOENIX CONTACT - 07/2006 Description Short-term mains interruptions are bridged by QUINT BUFFER,
More informationMPT-250C Wire Crimp Pull Tester
MPT-250C Wire Crimp Pull Tester The MPT-250C is a Motorized Tensile Wire Crimp Pull Tester used to test a crimp contact s or terminal s tensile strength. The unit has a range of 2.5 lbf to 250 lbf and
More informationIEC ESD Immunity to the discharge of electrostatic electricity
CONDUCTED RF EQUIPMENT POWER AMPLIFIERS IEC 61000-4-2 ESD Immunity to the discharge of electrostatic electricity Markus Fuhrer Electrostatic voltages U [kv] 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 synthetic
More information100BASE-T1 EMC Test Specification for ESD suppression devices
IEEE 100BASE-T1 EMC Test Specification for ESD suppression devices Version 1.0 Author & Company Dr. Bernd Körber, FTZ Zwickau Title 100BASE-T1 EMC Test Specification for ESD suppression devices Version
More informationLineMaster 100. Continuous-line Recorder. ABB Instrumentation 10/ EN
LineMaster 100 Continuous-line Recorder 10/43-1.10 EN 1 to 4 measuring channels Format 144 mm x 144 mm; installed depth 250 mm Combined chart unit for roll chart (32 m) or folded chart paper (16 m) Measuring
More informationIMU3000 Test System. Immunity Tests
Immunity Tests IMU3000 Test System IMU3000 Overview 3 Features & Benefits 4 Application Options 6 Standards 7 Technical Specifications 8 Accessories and Options 12 TEMA3000 Software 18 EMC PARTNER s Product
More informationEMI/ESD Filters for Cellular Phones
EMI/ESD Filters for Cellular Phones Cellular phones, as with all handheld and wireless devices are susceptible to the damaging effects of Electrostatic Discharge (ESD) transients. As much as 40 kilovolts
More informationRT4F-120V/20A-WAC RECTIFIER
The RT4F-120V/20A-WAC is a switched mode rectifier/charger module designed to provide up to 20A of output current into a 120V nominal system. This charger has been designed for use in conjunction with
More informationPESD24VF1BSF. Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit C d diode capacitance f = 1 MHz; V R = 0 V
11 December 2015 Product data sheet 1. General description Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diode in a DSN0603-2 (SOD962-2) leadless ultra small Surface-Mounted
More informationThermo Scientific ECAT
Expert Computer-Aided Testing for pulsed EMI immunity Features & Benefits Tests for pulsed EMI hazards: EFT, Surge, PQF Ideal test system to address most applicable EMC & Telecom standards, including CE
More informationPESD5V0C1USF. in portable electronics, communication, consumer and computing devices.
6 May 215 Product data sheet 1. General description Ultra low capacitance unirectional ElectroStatic Discharge (ESD) protection diode, part of the TrEOS Protection family. This device is housed in a DSN63-2
More informationBFM-II BFM-II BRANCH FEEDER MONITOR. Highlights
BRANCH FEEDER MONITOR SATEC s is the second generation of Branch Feeder Monitor, providing energy management for multi-point power solutions. Ideal for both new and retrofit projects, the automatically
More informationDATA SHEET DEPRECATED - PCM5 1. Document no.: N/A
DATA SHEET DEPRECATED - PCM DEIF A/S Frisenborgvej DK-800 Skive Tel.: +4 64 64 Fax: +4 64 6 info@deif.com www.deif.com Document no.: N/A AWC 00 PCM data sheet - DEPRECATED. AWC 00 system. System specifications...
More informationIFR 6000 Transponder/DME Ramp Test Set
IFR 6000 Transponder/DME Ramp Test Set Product Specification DME pecifications A 5-minute warm-up period is required for all specifications. Output Reply Output Level Antenna Port Distance to UUT antenna
More informationRT12-240V/2.4kW Rectifier Specification
The RT12-240V/2.4kW is a switched mode rectifier (SMR) module that delivers up to 2.4kW of output power (and up to 11A output current) into a 240V nominal DC system. The RT12 suits AC supply voltages between
More informationTechnical Data TICRO 100
Technical Data TICRO 100 IEEE 1588/PTP Time Converter 2014 by OMICRON Lab V1.0 Visit www.omicron-lab.com for more information. Contact support@omicron-lab.com for technical support. Smart Measurement Solutions
More informationMillenium 3. General Characteristics. General environment characteristics for CB, CD, XD, XR and XE product types
Millenium 3 General Characteristics Millenium 3 Compact Range Millenium 3 Expandable Range Millenium 3 Communication Options Millenium 3 Range General environment characteristics for CB, CD, XD, XR and
More informationAdvanced Test Equipment Rentals ATEC (2832) PSURGE Haefely is a subsidiary of Hubbell Incorporated.
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) PSURGE 8000 Modular expandable surge system www.haefelyemc.com a brand of Haefely is a subsidiary of Hubbell Incorporated.
More informationHigh Voltage Power Supplies
Source voltages up to 5kV and 10kV 1µA current measurement resolution Multi-channel programmable DC power supplies Low noise for precision sourcing and sensitive measurements; selectable filters reduce
More information4 channel PD tester for semiconductor test TPP
4 channel PD tester for semiconductor test TPP New! Up to 18.3kV peak (13kV rms) Multi channel Partial discharge test system for check up the safety electric isolation of electronic components (e.g. opto
More information20A DRR Module / 40A DRR Module
20A DRR Module / 40A DRR Module Features: Full corrosion resistance aluminium chassis even with deep scratches caused by rugged handling Wide Input & Output Range 22-60Vdc. Built-in 2 Channel DC OK signal
More informationMINI-DC-UPS/12DC/4. Extract from the online catalog. Order No.:
Extract from the online catalog MINI-DC-UPS/12DC/4 Order No.: 2866598 Uninterruptible power supply with integrated power supply unit, 4 A, in combination with MINI-BAT/12/DC 1.6 Ah or 2.6 Ah Commercial
More informationAttachment plug with surge protection for coaxial signal interfaces. Connection: N connector, male/female
Extract from the online catalog CN-UB-70DC-6-SB Order No.: 2803153 Attachment plug with surge protection for coaxial signal interfaces. Connection: N connector, male/female Commercial data EAN 4046356293204
More informationElectronic. Smart Testing Series
Smart Testing Series ELABO Smart Testing Modules Available for Insulation test module (DC) 0.05 kv (DC)... 1.20 kv (DC) / 100 kω... 10 GΩ High Voltage / Insulation Test Module (DC) 0.05 kv (DC)... 3.00
More informationPHOENIX CONTACT - 01/2007
Uninterruptible power supply INTERFACE Data Sheet 103123_00_en PHOENIX CONTACT - 01/2007 Description Especially compact and easy-to-use, the new MINI-DC-UPS/ 24 DC/2 is a combination of the power supply
More informationRT4B-110V/12A RECTIFIER
The RT4B-110V/12A is a switched mode rectifier (SMR) module designed to provide up to 12A of output current into a 110V nominal system. It can be used with or without a cooling fan. With a fan it runs
More informationQUINT-PS AC/24DC/10
Extract from the online catalog QUINT-PS-100-240AC/24DC/10 Order No.: 2938604 DIN rail power supply unit 24 V DC/10 A, primary switched-mode, 1- phase Commercial data EAN 4017918890537 Pack 1 Pcs. Customs
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
More informationRT4F-48V/50A-WAC RECTIFIER
The RT4F-48V/50A-WAC is a switched mode rectifier (SMR) module designed to provide up to 58A of output current into a 48V nominal system, over a wide range of AC input voltage. This rectifier has been
More informationLGR-5327 Specifications
s Revision 1.0, April, 2010 Copyright 2010, Measurement Computing Corporation All specifications are subject to change without notice. Typical for 25 C unless otherwise specified. s in italic text are
More informationPI-EX-ME-2NAM/COC-120VAC
PI-EX-ME-NAM/COC-0VAC Ex-i NAMUR Isolation Amplifier, With Intrinsically Safe Input and Relay Output, PDT, Two-Channel, 0 V AC Supply INTERFACE Data Sheet 0944_00_en PHOENIX CONTACT - 0/008 Description
More informationPI-EX-ME-2NAM/COC-24VDC
Ex-i NAMUR Isolation Amplifier, With Intrinsically Safe Input and Relay Output, PDT, Two-Channel, 4 V DC Supply INTERFACE Data Sheet 0033_0_en PHOENIX CONTACT - /007 Description The PI-EX-ME-NAM/COC-4VDC
More informationPHOENIX CONTACT - 01/2010. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Uninterruptible power supply with integrated power supply unit INTERFACE Data sheet 104211_en_00 1 Description PHOENIX CONTACT - 01/2010 Features The MINI-DC-UPS provide an uninterruptible DC voltage both
More informationIB ST 24 AO 4/EF. INTERBUS-ST analog output module, 4 outputs, 0-10 V, ±10 V, 0-20 ma, 4-20 ma. Data sheet. 1 Description
INTERBUS-ST analog output module, 4 outputs, 0-10 V, ±10 V, 0-20 ma, 4-20 ma Data sheet 105597_en_01 PHOENIX CONTACT 2014-10-24 1 Description The module is designed for use within an ST station. It is
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationTRIO-PS/1AC/24DC/20. Extract from the online catalog. Order No.:
Extract from the online catalog TRIO-PS/1AC/24DC/20 Order No.: 2866381 DIN rail power supply unit, primary-switched mode, 1-phase, output: 24 V DC / 20 A Commercial data EAN 4046356046664 Pack 1 pcs. Customs
More informationSpecifications USB-1616HS
Document Revision 1.0, August, 2007 Copyright 2007, Measurement Computing Corporation Typical for 25 C unless otherwise specified. Specifications in italic text are guaranteed by design. Analog input A/D
More informationPESD3V3L1UA; PESD3V3L1UB; PESD3V3L1UL
PESD3V3L1UA; PESD3V3L1UB; PESD3V3L1UL Rev. 01 17 June 2009 Product data sheet 1. Product profile 1.1 General description Low capacitance unidirectional ElectroStatic Discharge (ESD) protection diodes in
More informationAC/DC Peak Voltmeter, Types MU17 and MU18
HIGHVOLT Prüftechnik Dresden GmbH Marie-Curie-Straße 10 01139 Dresden, Phone +49 351 845 700 Fax +49 351 845 679 E-mail sales@highvolt.de Web http://www.highvolt.de Data Sheet 5.56/7 AC/DC Peak Voltmeter,
More informationTU531, TU532 Terminal Unit
Ordering Data DATA SHEET TU531, TU532 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 217 200 R0001 1SAP 217 000 R0001 1SAP 417 000 R0001 TU531, terminal unit, 230 VAC,
More informationGeneral-Purpose 8-Slot Chassis for PXI
NI Series 0 to 55 C extended temperature range () 43 dba acoustic emissions (Q) Accept both 3U PXI and CompactPCI modules Comply with all PXI and CompactPCI Specifications Low-jitter internal 10 MHz reference
More informationHandyscope HS3. User manual. TiePie engineering
Handyscope HS3 User manual TiePie engineering ATTENTION! Measuring directly on the line voltage can be very dangerous. The outside of the BNC connectors at the Handyscope HS3 are connected with the ground
More informationSeries Watt DC Power Supplies
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Series 2268 850-Watt DC Power Supplies Specifications SPECIFICATION CONDITIONS This document contains
More informationPESD18VF1BL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data. 5. Pinning information
10 July 2018 Product data sheet 1. General description Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diode in a DFN1006-2 (SOD882) leadless ultra small Surface-Mounted Device
More informationModel 7705 Control Module
www.keithley.com Model 7705 Control Module User s Guide PA-696 Rev. D / October 2006 A G R E A T E R M E A S U R E O F C O N F I D E N C E Safety Precautions The following safety precautions should be
More informationScopeMeter. Accessories. PC Software. Protective Cases. Powering and Charging
ScopeMeter Accessories PC Software SW90W FlukeView ScopeMeter Software for Windows English, French and German language For Fluke 190 & 120 Series ScopeMeter Windows 2000/XP Requires one free USB or RS-232
More informationScopeMeter. Accessories. PC Software. Protective Cases. Powering and Charging
ScopeMeter Accessories PC Software SW90W FlukeView ScopeMeter Software for Windows English, French and German language For Fluke 190 & 120 Series ScopeMeter Windows 2000/XP Requires one free USB or RS-232
More informationPROFITEST Tester for DIN EN and VDE 0113
3-348-802-03 17/12.10 Clear-cut operating menus Illuminated display Two 4 m measurement cables (4-wire connection) Remote control for efficient use Limit value adjustment Convenient memory and report generating
More informationAI561 Analog Input Module
Ordering Data DATA SHEET AI561 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1101 AI561, analog input module, 4 AI, U/I 1TNE 968 901 R3101 1TNE 968
More informationPart No. Description Product Life Cycle Phase *) unit, 24 VDC, spring terminals. unit, 24 VDC, spring terminals, XC version
Ordering Data DATA SHEET TU520 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 214 400 R0001 1SAP 414 400 R0001 TU520-ETH, PROFINET I/O terminal unit, 24 VDC, spring
More informationIssue 03/2013. The Electronic Load
Issue 03/2013 ZS Electronic Loads, PL Series Interface overview RS-232 USB / GPIB LAN System bus Analog X Analog isolated / X Standard ption / not available PL506 PL1006 Voltage Current Resistance 3) Model
More informationDSO3062A Oscilloscope, 60 MHz
Products & Services Technical Support Buy Industries About Agilent United States Home >... > Oscilloscopes > 3000 Series portable economy oscilloscopes (4 models) > DSO3062A Oscilloscope, 60 MHz Product
More informationAO523 Analog Input Module
Ordering Data DATA SHEET AO523 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 200 R0001 1SAP 450 200 R0001 AO523, analog output module, 16 AO, U/I, 12 bits
More informationPHOENIX CONTACT - 12/2007
Ex-i NAMUR Isolation Amplifier, With Intrinsically Safe Input and Active Transistor Output, Two-Channel INTERFACE Data Sheet 0943_00_en PHOENIX CONTACT - /007 Description The PI-EX-ME-NAM/TO-A is a two-channel
More informationPAT-Cal 2 TECHNICAL MANUAL
Portable Appliance Tester Calibrator PAT-Cal 2 TECHNICAL MANUAL 1 Time Electronics Limited Botany Industrial Estate, Tonbridge, Kent, TN9 1RH. Tel: +44(0)1732 355993 Fax: +44(0)1732 770312 Email: info@timeelectronics.co.uk
More informationGeneral Purpose Chassis for PXI and CompactPCI
General Purpose PXI-1000B, PXI-1002, PXI-1006 Accepts both 3U PXI and 3U CompactPCI modules Filtered, forced-air cooling Integrated, internal power supplies Complies with PXI and CompactPCI specifications
More informationOX 5022-CK OX 5042-CK
QUICK START USER GUIDE OX 5022-CK OX 5042-CK Statement of Compliance Chauvin Arnoux, Inc. d.b.a. AEMC Instruments certifies that this instrument has been calibrated using standards and instruments traceable
More informationMINI MCR-SL-UI-2I. Configurable signal duplicator. Data sheet. 1 Description
Configurable signal duplicator Data sheet 102382_en_03 PHOENIX CONTACT 2012-05-02 1 Description The MINI MCR-SL-UI-2I(-SP)(-NC) configurable signal duplicator is used to electrically isolate, condition,
More informationPT 2X2-HF-24 DC-ST. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2X2-HF-24 DC-ST Order No.: 2839729 The illustration shows the version PT 2x2-HF-12 DC-ST Protective plug PT with HF protective circuit for two 2-core floating signal
More informationLOW WEIGHT, SMALL SIZE,
THE LOW WEIGHT, SMALL SIZE, ONE-TOUCH SOLUTION Portable appliance testing The Fluke 6000-2 PAT Testers Fluke 6200-2 and 6500-2 TEST MORE APPLIANCES PER DAY The Fluke 6200-2 and 6500-2 PAT testers verify
More informationConnection to the telephone network is made via a standard RJ48C type jack as indicated in the diagram below:
EQUIPMENT DESCRIPTION The model R2T1 is a Dual (2-Line) T1 PCI (Bus) Plug-In Card. Connection to the telephone network is made via a standard RJ48C type jack as indicated in the diagram below: -- (2) RJ48C
More informationGrounding Monitoring Device Series 8485
www.stahl.de > Controlled electrostatic grounding of road tankers and rail cars during loading > Continuous monitoring of correct grounding > The object recognition prevents potential operator errors (with
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationKeysight U2751A USB Modular Switch Matrix
Keysight U2751A USB Modular Switch Matrix The Keysight Technologies, Inc. U2751A USB modular switch matrix offers a high quality, low-cost switching solution for automated testing. It has 32 two-wire cross
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationDC561, digital input/output module,
Ordering Data DATA SHEET DC561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2001 DC561, digital input/output module, 16 configurable inputs/outputs,
More information