Hospitality Products 2011

Transcription

1 Hospitality Products 2011 Real Solutions Reliable Support

2 Hospitality Products 2011 Table of Contents Onity All rights reserved. Data subject to change without notice. Electronic Locking Solutions HT Mortise Lock Internal Components HT Mortise Lock External Components Onity HT22 Onity HT24w Onity HT28 Smart Onity ADVANCE Onity ADVANCE RFID Manual Insertion Encoder Dual Technology HT22m Motorized Encoder Revalidator Portable Programmer Extended Portable Programmer (XPP) Portable Printer HT24 Electronic Lock Mag-Stripe Card Reader HT28 Electronic Lock Dual Smart/Mag-Stripe Card Reader Lockcases and Latches Levers and Finishes Strikes, Plates and Finishes Rim Panic Interface Electronic In-Room Safes OS600 Digital Keypad / Keycard Safe OS400 Digital Keypad Safe with Printable Audit Trail OS200 Digital Keypad Safe with Audit Trail Energy Management Solutions Intelligent Technology SensorStat DDC 2-F SensorStat Wireless DDC SensorStat DDC Savings Opportunities innpulse

3 Electronic Locking Solutions Real Solutions Reliable Support

4 HT Mortise Lock Internal Components Item Description Part Number A Privacy Cable QH B Weather Gasket QH C Back Plate Standard QH D Clutch Cover Gasket QH (comes with Weather Gasket) E Clutch Kit QH F Nylon Bearing QH G Handle Return Plate QH Item Description Part Number H Circuit Board (HT24) RH Circuit Board (HT28) RD I Spring Assembly QH J Reader Module (HT24) RH Reader Module (HT28) RD K Battery Cover Gasket QH L Battery Module Cover QH (plastic insulator) M Battery Module RH

5 HT Mortise Lock External Components All numbers given are for right handed parts, toledo lever, satin chrome finish Item Description Part Number 1 Outside Lever (Handle) JH (includes Outside Lever Mounting Screw) 2 Battery Cover Mounting Screw XS Battery Cover JC Outside Lever Mounting Screw XS Reader Cover JC A Outside Trim (1/2 Lock) LM (comes with Internal Components, Reader Cover, Battery Cover and Lever) Item Description Part Number 6 Privacy Cable QH Mounting Plate QH Mounting Screws (pk) XS Inside Escutcheon JE Thumb Turn JH Inside Lever (Handle) JH Inside Lever Mounting Screw XS Thumb Turn Screw XS

6 Onity HT22 Features Superior user interface includes an easy-to read widescreen display Up to 8 check-in stations can be linked in a multi-front-desk configuration with up to 100 operators Internal modem for remote update of the software or the locking plan and remote reporting capabilities Up to 100 different types of master keys assigned to 250 users by name Provides staff time control Works with both off-line and on-line devices Upgradeable to more advanced Onity systems Compatible with Onity Safes and Onity Energy Management Systems off-line/on-line Onity Magnetic Stripe Electronic Lock Features Non-volatile memory records the last 500 lock openings including date, time and card used Programmable for length of time door remains open, and automatic closing. Low battery indicator lights alert hotel staff without disturbing guest. Programmable for the office-mode function (free passage). Corrosion-resistant case for normal atmospheric conditions. Lock ensures accuracy by reading the card twice; once during insertion and once during removal. Each new guest card overrides any previous guest card, preventing re-entry. Designed for small to medium-size properties of up to 500 rooms, the Onity HT22 offers a full array of features, includingdirect PMS interface, without requiring a PC. That means it will take up less space at your front desk, while still giving you thefeatures you need. The Onity HT22 provides a smooth and efficient check-in, giving your guest s stay a great start. Fully-featured and easy to use, the HT22 is a powerful management system within a compact encoding unit. With the unique Insertion Technology encoding offered by the Onity manual insertion encoder, errors caused by improper encoding are reduced to virtually zero. The HT22 system operates with the Onity HT24 magnetic stripe electronic lock. And Onity operates 24 hours a day, 365 days a year to ensure you ll get the support you need, when you need it. All Onity products are backed by Onity s warranty and our commitment to provide the highest standards of service for our customers.

7 Onity HT24w Features Manages up to 6,000 rooms PC-based system Windows 2000/XP/2003 compatible User friendly: easy to learn, easy to use Direct interface with any PMS or POS system Allows Multi-Front-Desk configuration: links as many check-in terminals as needed without requiring additional PCs Up to 5,000 master cards identified by user name Provides staff time control Capability to control full range of Onity options: room safes; energy-saving devices; on-line and off-line card readers; card identifiers Compatible with Onity Safes and Onity Energy Management Systems off-line/on-line Onity Magnetic Stripe Electronic Lock Features Non-volatile memory records the last 500 lock openings including date, time and card used Programmable for length of time door remains open, and automatic closing. Low battery indicator lights alert hotel staff without disturbing guest. Programmable for the office-mode function (free passage). Corrosion-resistant case for normal atmospheric conditions. Lock ensures accuracy by reading the card twice; once during insertion and once during removal. Each new guest card overrides any previous guest card, preventing re-entry. Whether you have a dozen rooms or 6,000, the Onity HT24w Electronic Locking System can take you where you need to be. The Onity HT24w is brilliantly designed, yet ingeniously simple to use. Your staff can perform at optimum efficiency, and your guests will appreciate your making their personal comfort and security a top priority. The Onity HT24w system offers the features you need, with the added advantage of Onity world-renowned reputation for customer support. The Onity HT24w system operates with the Onity magnetic stripe electronic lock. Onity s technical department is open for you, 24 hours a day, 365 days a year, to ensure you ll get the support you need, when you need it. All Onity products are backed by Onity s warranty and our commitment to provide the highest standards of service for our customers.

8 Onity HT28 Smart Features Manages up to 6,000 rooms Manages up to 5,000 different masters Master cancellation per individual user (not per user group) when using the Revalidator Enhanced suite management Up to 100 networked encoding stations Compatible with remote encoding and kiosk Windows 2000/XP/2003 compatible PMS & POS Interface TCP/IP Enhanced Interface Staff Time Control Up to 200 time tables 8 shifts; 3 day types Lock audit of the last 500 transactions Compatible with Onity Safes and Onity Energy Management Systems off-line/on-line Onity HT28 Smart. 90% of the power and efficiency of an on-line system at 1/5th the cost. The Onity HT28 Smart system, in conjuction with the Revalidator, improves the security, productivity and management of your property through the use of smart card techology. Dual Technology. The Onity HT28 Smart contains a multitechnology reader with full interoperability. This allows you a combination of magnetic stripe and smart cards at the same time.

9 Onity HT28 Smart The Revalidator brings a new array of features that enhance the Onity HT28 Smart electronic locking system: Improve Master Key Management Master Key Cancellation (without walking to a single lock) Master Key Distribution Master Key Changes Improve Overall Security Authorized Employee Database Checks Individual Staff Activity Reports Master Key Ownership Control (PIN Code) Master Key expiration with customizable revalidation increments in relation to the sensitivity of the card Optimize Human Resources Management Staff Card Distribution Housekeeper Dispatch Task Assignments Master Key Lock-Out Individual Employee Mailbox for Messages How the Revalidator Works: Sample HT28 Smart Front Desk System Configuration on Onity HT COM Network: up to 100 endoding stations

10 ADVANCE is a revolutionary locking solution that is destined to change the way you look at hotel security, design and technology. ADVANCE combines the proven reliability of the world s most trusted name in electronic locking with a fresh new aesthetic that is designed to meet the needs of the demanding hospitality environment. ADVANCE features a unique two-piece modular design and an array of attractive options that allow you to seamlessly blend your guest room door locks into any hotel décor. One look at ADVANCE and you ll never look at door locks the same way again. Mag-Stripe Lock Features Non-volatile memory records the last 500 lock openings including date, time and card used Programmable for length of time door remains open, and automatic closing. Low battery indicator lights alert hotel staff without disturbing guest. Programmable for the office-mode function (free passage). Corrosion-resistant case for normal atmospheric conditions. Lock ensures accuracy by reading the card twice; once during insertion and once during removal. Each new guest card overrides any previous guest card, preventing re-entry. Smart-card Lock Features Dual technology reads smart-chip cards and Mag-Stripe Cards Non-volatile memory records the last 500 lock openings including date, time and card used Programmable for length of time door remains open, and automatic closing. Low battery indicator lights alert hotel staff without disturbing guest. Programmable for the office-mode function (free passage). Corrosion-resistant case for normal atmospheric conditions. Lock ensures accuracy by reading the card twice; once during insertion and once during removal. Each new guest card overrides any previous guest card, preventing re-entry.

11 Operation Systems: ADVANCE can be powered with any of the following. HT22i For Mag-stripe keycards. HT24w For Mag-stripe keycards. Expect more! HT28 Smart & Revalidator Dual Technology Locks accept both Mag-stripe and Smart. All the benefits of HT24w plus virtually on-line performance. Ideal for small and mid-sized properties. All the features and functions you expect from an electronic locking system without the need for a PC. PMS interface option. Fully featured PC-based system for any property size. Virtually unlimited number of frontdesk card issuing stations. Optional PMS and POS interfaces. Enhances overall security and improves staff and operations management. Smart keycards can be used for staff only while guests use inexpensive mag-stripe. Smart keycards enable multiapplication. Cover Plates: Onity offers a selection of attractive cover plates that are ideal for retrofit projects. Customized cover plate designs can also be developed upon request. Latch Mechanisms: Onity offers a wide range of latch mechanisms to suit the needs of any property. ANSI UL approved ANSI/BHMA A Certified ANSI with Auto Deadbolt UL approved EURO with Auto Latch Meets European standards pren12209 (Grade 2) and UNE (grade B. Maximum) DIN with Auto Deadbolt Made to DIN Class 3 Fire Approved Finishes: Complement the elegance of your HT ADVANCE lock with any of these wear-resistant finishes. Handles: Choose the perfect handle to reflect the design style of your property. Standard Wing Toledo Satin Chrome (626) Satin Brass (606) Antique Brass (609) Polished Brass (605) Granada Note: Not all and options are available in every region. Please consult your Onity sales representative for details.

12

13

14

15 Manual Insertion Encoder Features Interfaces with any PMS system Internal modem available for immediate and remote software upgrade and locking plan modifications Low cost Easy to use Reads/writes cards on track #3 Battery back-up Keeps in non volatile memory all the hotel cards codes (as PC backup) Works with standard magnetic stripe cards Communication through screen (8 x 20 characters message display) Standard parallel printer Self-contained compact encoding/control station with new insertion technology (saves space at reception) Connects to a PC running HT24w or HT28 Incorporates the uninterrupted key supply function, which maintains the terminal in operation, should the hotel PMS fail Possibility to work in up to 10 different languages: English; Spanish; French standard and able to be adapted to other languages if required. Incorporates 7 hot keys for the most frequently-used functions Low coercitivity magnetic stripe cards Records the last 5,000 events Part Numbers Manual Insertion Encloder PH Power Cable VZ Specifications Weight: 880 gr. Dimensions: 13.7 / 9.2 / mm / 235mm / 135mm Power supply: 12 V DC

16 Dual Technology HT22m Motorized Encoder Features Works with standard high & low coercivity magnetic stripe and smart chip cards 3 track encoder that reads/writes ISO information on track 1 or 2 with Onity data on track #3 (when used with PC-based system) Reads/writes onto memory chip and microprocessor Smart cards (contact Onity for more info about current compatible cards) Up to 10 different languages (now English, Spanish, French are standard and others available upon request) Communication through screen (8 x 22 character LCD message display) Easy to use Small compact design The three-track capability for mag-stripe cards and multi-application capabilities through Smart cards allow integration with point of sale (POS) terminals, vending machines, etc. Specifications Dimensions: L / 6.5 W / H 257mm L / 165mm W / 92mm H Weight: 3.0 lb / 1.36kg Voltage: 15 VDC Operating Current: 1200 ma Card-Coercivity: 300 Oersteds (low) Oersteds (high) Part Number PH

17 Revalidator The Revalidator brings a new array of features that enhance the Onity HT28 Smart electronic locking system. Improve Master Key Management Master Key Cancellation (without walking to a single lock) Master Key Distribution Master Key Changes Improve Overall Security Authorized Employee Database Checks Individual Staff Activity Reports Master Key Ownership Control (PIN Code) Master Key expiration with customizable revalidation increments in relation to the sensitivity of the card Optimize Human Resources Management Staff Card Distribution Housekeeper Dispatch Task Assignments Master Key Lock-Out Individual Employee Mailbox for Messages Part Number PD With HT28 Smart, Onity defines the new standard for state-of-the-art electronic locking systems by combining microprocessor SMART Cards, Memory Chip Cards, and Magnetic Stripe Technology in one system. Unlike other Smart Card electronic lock providers, Onity has taken the solution one step further with an innovative concept called Revalidator. Specifications Height: cm Width: cm Depth: cm Weight: 13.6 lbs 6.2 kg Equipment performs optimally in operating temperatures between 41 to 95 F (5 to 35 C) and humidity ranges between 20% and 80%. Power: VDC (1-6 Amps) Display: 7x20 character LCD Optional AL300ULT Power Supply Input Voltage: 115VAC, 1.0 Amp or 230VAC 50/60 Hz Output Voltage: 12VDC or 24VDC (field selectable) Regulated Output Current: 2.5 rated voltage Secondary Protection: Overload protected by regulator circuit Charging Current: 1.25 amps Max Dimensions: 12"H x 12"W x 4"D Material: Steel Certifications/Compliance: Meets UL 1481, 294, Suited for UL Certified Fire Alarms and Access Control Systems. Compliance US: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

18 Revalidator The Revalidator provides a simple way to distribute important information about assignments, schedules, special events, shift changes or special messages. How the Revalidator Works: Operation Thanks to the write back feature of the HT28 Smart locks, each use of the staff card is also registered into the Smart card chip. During the routine of revalidation, stored information is uploaded from the card to the system database allowing hotel management to access information and create customized reports at anytime, such as: Individual Staff Tracking Report (Who, Where, When) Engineering Reports Low Battery Report Lock Status Report Special Assignment Reports (i.e. Mini-Bar Checks, Contract Employee Checks, etc.) Individual Productivity Analysis

19 Revalidator Sample HT28 Smart Front Desk System Configuration on Onity HT COM Network: up to 100 encoding stations Revalidator Reduces Wiring by 99%: Other Floors* 2nd Floor 1st Floor Housekeeping Back-of-House Recommended Revalidators: at least 1 on Housekeeping and 1 for Back-of-House. *Optional: Floor-Unit quantity is dependent on property size, system application and revalidation frequency.

20 Portable Programmer Features Compatible with Onity HT22, HT24 and HT28 Smart electronic locking systems. Data transfer between the Onity system and off-line devices: wall readers and safes Hand held, portable and easy to use Programs the off-line devices Updates the codes and timetables for the offline devices Downloads audit trail from Onity electronic locks Tests the functions of the lock May be used to open locks in emergency cases Allows uninterrupted front desk operation at all times Membrane keypad and 2 x 16 characters display Buzzer for communication steps and errors Specifications Weight: 220 gr. Size: 7.0 / 4.0 / mm / 100mm / 45 mm Material: black ABS 4 standard batteries (1.5 V, alkaline, AA, LR6) Part Numbers Portable Programmer PH Portable Programmer to Lock Cable VC Portable Programmer to Encoder Cable VC The Communication Link The Onity Portable Programmer is the clever link between your front desk and all of your secured access points. Easy to use and lightweight, this handheld unit allows your front desk staff to perform communication functions without interrupting check-in procedures. The Onity Portable Programmer is used by your staff to test or program your locks, and to retrieve the audit trail of Onity electronic locks, cards readers and electronic in-room safes. The Portable Programmer is the only tool you need to run a complete diagnosis of the functioning of any Onity lock, or to open the lock in case of emergency. The direct connection port to the lock provides hassle-free communication. Compatible with both Onity HT28 Smart, HT24w and HT22 electronic locking systems.

21 Extended Portable Programmer (XPP) Features Compatible with Onity HT24, HT28 electronic locking systems and OS electronic safes. Transfers data between the PC and the locks and/or other off-line devices Programs the locks and other off-line devices Downloads audit trail from locks into PC Displays lock audit trail on screen Lock audit trail printable using optional portable printer Checks technical functions of the lock - diagnosis Opens locks in emergency cases (battery failure) Password Protected: Operator log-in required Stores system user names Adjustable security by Operator User friendly, heavy-duty ADA compatible membrane keypad Alphanumeric keypad with soft key menus Large (LCD) display 8 x 22 characters Upgradeable Messages in different languages (optional) Low power detection Fast charge of batteries, within 1 hour Auto shut-off (configurable time) Requirements Version 3.1 or higher HT24 or HT28 software Dedicated serial port on the computer system Works with existing HT24 or HT28 locks Specifications Case material: ivory ABS Dimensions: 8.0 L / 4.25 W / H, 203mm L / 108mm W / 40mm H Weight: 1.1 lb / 0.5 kg Voltage: 6 VDC supplied by 4 standard AA NiCad (rechargeable) batteries or 12 VDC adapter Charging current: 1000 ma Memory Capacity: 4.5M RAM available for storage of lock and audit data Part Number PH

22 Portable Printer Features Compatible with Onity HT24, HT28 electronic locking systems and OS electronic safes. Direct thermal printing system Serial interface LED color for Power and Charge Auto shut-off Specifications Battery type: Li-ion battery pack Battery charging time: Approximately 3 hours by main unit + AC adapter Recommended paper: TF50-KS-E2D (Nippon paper) AC Adapter: 10AD-JU (for Japan, USA, and Canada) 10AD-E (for Europe) Input voltage: 90 V V AC Output voltage: 9.0 V DC 1.0 A Operating Environment: Temperature: Humidity: 35-80% RH (No dew condensation) Characteristics Dimensions: 4.5 width / 3.5 depth / 2.25 height 116mm width / 90mm depth / 51mm height Paper cover width: 57mm / 2.24 Weight: Approx. 370 gr / 0.81 lb (With battery and belt clip, without paper) Part Number CP

23 HT24 Electronic Lock Features Compatible with Onity HT24 and HT22 electronic locking systems. Off-line installation (no wires required) Fits all types of doors Audit trail memory: records last 500 openings Non volatile memory (program) Programmable for length of time door remains open and automatic closing. Flexible masterkeying Lock ensures accuracy by reading the card twice -- once during insertion and once during removal Uses standard ISO/ABA mag-stripe cards and AA batteries Office mode (free access) Green and red LED s to indicate lock status Indication of low batteries Deadbolt operates by a thumbturn inside the room for added guest privacy and security ("Do-Not-Disturb" Function) Corrosion-treated for normal atmospheric conditions Special versions for outdoors Concealed screw design Includes a low consumption clock/calendar to control card shifts Specifications Size: 11.2 / 2.8 / mm / 72mm / 50mm Temperature Standard alkaline batteries: 0º C/65º C (32º F/149º F) Optional lithium batteries: -40º C/75º C (-40º F/167º F) Humidity: up to 95% without condensation Power supply: 4 alkaline 1.5- volt AA batteries Power consumption in stand-by: 15 ma

24 HT24 Electronic Lock How to Compute Your Part Number: KHD - _ - _ - _ A = Autobolt 605 =Polished Brass L =Left Hand AN = Autobolt Narrow 606 =Satin Brass R =Right Hand C = Cylindrical 609 =Antique Brass L = Latch Only Mortise 619 =Satin Nickel M = Standard Mortise 625 =Polished Chrome MN = Narrow Mortise 626 =Satin Chrome SM = Shallow Mortise 695 =Dark Bronze Powdercoat Example: KHD - S M R HT24 Lock with a Shallow Mortise, Satin Chrome Finish, Right Hand

25 Mag-Stripe Card Reader Features Compatible with Onity HT24 and HT22 electronic locking systems. Allows both on-line and off-line configurations Reads magnetic cards and sends the information to the wall reader control unit (on- or off-line) Red and green LED s to indicate status A 12VDC heater to function below 0º C (32º F) is available as an option Specially designed for outdoor installations Size: 3.2 / 4.5 / mm / 115mm / 40mm Requirement: on-line or off-line wall-reader control unit On-line connection off-line/on-line Off-line connection Secure your property with card readers at perimeter doors, elevators, parking areas, pools, health facilities, etc. The on-line card readers allow reception personnel to check openings as well as authorize or deny card access in real time. Nonvolatile memory supports an audit trail of the last openings, and an anti-passback function is also incorporated. The off-line card readers allow only authorized card holders to gain access, and the audit trail retains the last 500 openings. Card Readers are programmable, just like any Onity lock. Perfect for interior or exterior use, readers can be equipped optionally with a heater for temperatures below 0 ºC (32º F). There are also special versions for elevators which can optionally incorporate an area control board that allows filtering the access to eight different areas from one single reader.

26 HT28 Electronic Lock Features Compatible with HT28 Smart electronic locking systems Stand alone installation (no wires required) Fits all types of doors Flexible masterkeying Programmable for length of time door remains open and automatic closing. Deadbolt operates by a thumbturn inside the room for added guest privacy and security ("Do-Not-Disturb" Function) Non-volatile memory: records last 500 openings including date, time and card user Multi-technology reader using either ISO/ABA mag-stripe card, memory-chip card, microprocessor smart card and any combination of the three. Powered by 4 standard AA batteries Programmable to customers needs ("Office mode" free passage, etc.) The LEDs light to give lock status including a low battery warning. Lock ensures accuracy by reading the card twice -- once during insertion and once during removal Auto Dead Bolt mechanism (optional) Corrosion treated for normal atmospheric conditions Size: 11.2 / 2.8 / mm / 72mm / 50mm Temperature: Standard alkaline batteries: 0º C/65º C (32º F/149º F) Optional lithium batteries: -40º C/75º C (-40º F/167º F) Humidity: up to 95% without condensation Power consumption in stand-by: 5-7mA Full Interoperability Smart Card Lock supports a wide range of smart cards simultaneously Multi-Technology Reader Onity Smart Card Lock can read both magnetic, smart memory and smart microprocessor cards simultaneously Enhance Your Property s Image Customize your locks by adding your logo or a design Automatic Reset After Entry Protects your guests while protecting your property from liability Smart Card Features a) Audit Trails The lock records the last 500 entries to protect you from liability The smart card can also be audited for employee tracking b) Low Battery Report The staff smart card audit trail also provides you with locks low battery indication Auto Deadbolt ( Optional ) Whether your guest is in or out of the room, you will always receive the added protection of a deadbolt

27 HT28 Electronic Lock How to Compute Your Part Number: KHD - _ - _ - = HT24 A = Autobolt 605 = Polished Brass L = Left Hand Y = HT28 AN = Autobolt Narrow 606 = Satin Brass R = Right Hand C = Cylindrical 609 = Antique Brass L = Latch Only Mortise 619 = Satin Nickel M = Standard Mortise 625 = Polished Chrome MN = Narrow Mortise 626 = Satin Chrome SM = Shallow Mortise 695 = Dark Bronze Powdercoat Example: KHD - Y S M R HT28 Lock with a Shallow Mortise, Satin Chrome Finish, Right Hand

28 Dual Smart/ Mag-Stripe Card Reader Features Compatible with HT28 Smart electronic locking systems Allows both on-line and off-line configurations Reads magnetic and smart cards and sends the information to the wall reader control unit (on- or off-line) Red and green LED s to indicate status Size: 3.2 / 4.5 / mm / 115mm / 40mm Requirement: on-line or off-line wall-reader control unit On-line connection off-line/on-line Off-line connection Secure your property with card readers at perimeter doors, elevators, parking areas, pools, health facilities, etc. The on-line card readers allow reception personnel to check openings as well as authorize or deny card access in real time. Nonvolatile memory supports an audit trail of the last openings, and an anti-passback function is also incorporated. The off-line card readers allow only authorized card holders to gain access, and the audit trail retains the last 500 openings. Card Readers are programmable, just like any Onity lock. There are also special versions for elevators which can optionally incorporate an area control board that allows filtering the access to eight different areas from one single reader.

29 Lockcases and Latches Lockcases Tubular UL approved latch installs in a standard prep for a cylindrical lock. UL/ULC listed for installation on fire doors. Standard square cornered 1/2 latch. Mortise, Latch Only ANSI standard mortise lock without deadbolt. UL/ULC listed for installation on fire doors. 3/4 latch. Mortise with Deadbolt ANSI standard mortise lock with 1 deadbolt that may be projected from either side of the door. UL/ULC listed for installation on fire doors. 3/4 latch. Note: 2 1/2 narrow fronts or backset mortise lockcase available on request. * Protected by US patent 6,578,888 B1, other patents pending. Mortise with AutoDeadbolt ANSI standard mortise lock with 1 deadbolt that projects automatically. UL/ULC listed for installation on fire doors. 3/4 latch.* Most Common Part Numbers Part Numbers Part Numbers Item Description (left-hand) (right-hand) Cylindrical Latch (satin chrome) QF (2 3/4 backset) QF (2 3/8 backset) Mortise Lockcase, Latch Only GL GL Mortise Lockcase with Deadbolt GS GS Mortise Lockcase with AutoDeadbolt GA GA

30 Levers and Finishes Levers Onity HT Series locks come standard with the Toledo lever. The remaining samples shown are available by request. Most Common Part Numbers (all numbers given are in satin chrome finish) Part Numbers Item Description (right-hand) Toledo Outside Lever JH (has a 1/2 return)* Toledo Jerez Toledo Inside Lever JH Granada Sevilla Granada Lever JH Barcelona Lever JH Jerez Lever JH Sevilla Lever JH (not available in Polished Chrome) Barcelona * Note: Some state fire codes require that lever handles installed on corridor doors must return to within 1/2 of the door surface. Finishes Onity HT Series locks are available in the finishes shown below. 605 Polished Brass 606 Satin Brass 609 Antique Brass 619 Satin Nickel 625 Polished Chrome 626 Satin Chrome 622 Black Powder Coat 695 Dark Bronze Powder Coat

31 Strikes, Plates and Finishes Strike Plates Standard Mortise 4 7/ Latch Only Mortise 4 7/ Cylindrical 2 3/4 4 7/8 Strike Plates* Face Plates* Cover Plates 5 x 13 1/4 5 x 18 Face Plates Standard Latch Only Wrap Plates (Please contact a Sales Representative for ordering information on wrap plates) Cover Plate Wrap Plate *Latch Only & Cylindrical Strikes not shown. *Latch Only Faceplate not shown. Finishes Onity Strike Plates, Cover Plates, Face Plates and Wrap Plates are available in the finishes shown below. 605 Polished Brass 606 Satin Brass 609 Antique Brass 619 Satin Nickel 625 Polished Chrome 626 Satin Chrome 622 Black Powder Coat 695 Dark Bronze Powder Coat

32 Strikes, Plates and Finishes Most Common Part Numbers (all numbers given are for right handed parts, satin chrome finish) Item Description Part Number Standard Mortise Strike Plate 4 7/8 HE Standard Mortise Strike Plate 10 HE Standard Mortise Strike Plate 12 HE Latch Only Mortise Strike Plate 4 7/8 HE Latch Only Mortise Strike Plate 10 HE Latch Only Mortise Strike Plate 12 HE Cylindrical Strike Plate 2 3/4 HE Cylindrical Strike Plate 4 7/8 HE Cover Plate 5 x 13 1/4 HQ Cover Plate 5 x 18 HQ Standard Face Plate HF Latch Only Face Plate HF

33 Rim Panic Interface Features Cost effective access solution Off-line installation, no wires required Fits all types of doors with a 5 stile or larger, new construction and retrofit Non-volatile memory and audit trail Suitable for outdoors and extreme weather conditions Components Stand-alone electronic lock or Card Reader Panic Bar Mounting Plate Face Plate Mounting Screws Specifications Designed to ANSI Grade 1 specifications UL listed ADA compliant Free moving clutch mechanism Temperature tolerance range: alkaline batteries 32º F/149º F (0º C/65º C); lithium batteries -40º F/167º F (-40º C/75º C) Humidity tolerance: up to 95% without condensation Power supply: 4 standard alkaline 1.5 volt batteries LR6/AA type (included), approximately 4 years life Options Monarch Series 18R Rim Panic Interface Part Numbers Monarch Series 18R Rim Panic Interface Kit, satin chrome finish KHA RIM 626 Von Duprin 98/99 Series Rim Panic Interface Kit, satin chrome finish KHA RPI1 626 *Does not include lock or bar. Von Duprin 98/99 Series Rim Panic Interface

34 Electronic In-Room Safes Real Solutions Reliable Support

35 OS600 Keycard Interface Safe Compatible and designed with your HT22, HT24w and HT28 Smart electronic locking systems in mind, the OS600 safe is the perfect addition to your hotel s security. OS600 safes are simple to use for both guests and staff. Built with high standards of quality, reliability and security, the OS600 is a perfect solution for electronic in-room safes. OS600 User Friendly 4-Digit Code Audit Trail (last 100 entries) ADA Compliant Keypad Insertion Protection "Code to Close" Technology Shut-Down Mode (30 minutes after 3 wrong attempts) 2 Solid Steel Bolts 4 AA Batteries Low-Consumption Motor Battery-Status Indicator (LEDs) Available in 5 sizes Compatible with HT22, HT24w and HT28 Smart Locking Systems Onity All rights reserved. Data subject to change without notice. Portable Programmer Emergency Openings Non-Resident Master Code Password Protected Most Common Part Numbers OS600 Ivory Laptop Safe, Right-handed NS Portable Programmer (PP) PT

36 OS600 Keycard Interface Safe Performance Features 4-Digit Code 6-Digit Code N/A ADA Compliant Buzzer Signal N/A Real Time Clock "Code to Close Technology" 4 LR6 AA 1.5V Batteries Low Consumption Motor # Operation with 4 AA 3,000 Power Status Indicator Audit Trail/# Operations Recorded 100 Portable Unit w/built-in Printer N/A Portable Unit Portable Unit Password Protected Multiple Operator Procedure N/A Emergency Power Supply Shut Down Mode Programmable Shut Down Mode N/A Non Resident Master Code Rental Mode/Frt. Desk Printed Ticket N/A Rental Mode/Keycard Compatible Rental Activity Reports PMS Interface Compatible Card Locks: HT22, HT24w, HT28 Smart Main Power Supply Inside Shelf (Suite Only) Pedestal Internal Power Outlet Mechanical Features Left Hinges Spring Loaded Door Two Solid Steel Bolts Insertion Protected Door Door Mounted Mechanism Replaceable Mechanism Tamper Proof Screws Digital Display LED Service Onity Worldwide Service Sizes Suite Size Business Size Laptop Size Mini Size Wall Size Finishes Ivory Finish Matte Black Finish Corrosion / Scratch Resistant Finish N/A Also Available in Onity All rights reserved. Data subject to change without notice. Standard Optional N/A Not Applicable External Dimensions Suite Safe Business Safe Height: mm mm Width: mm mm Depth: mm mm Volume: 21.5 gal 81.5 L 10.2 gal 38.6L Weight: 66.3 lbs 30 kg 48 lbs 21.8 kg SUITE and WALL Sizes Laptop Safe mm mm mm 8.2 gal 31 L 38.6 lbs 17.5 kg BUSINESS LAPTOP MINI Mini Safe mm mm mm 4.9 gal 18.5 L 23.1 lbs 10.5 kg Wall Safe mm mm mm 5.4 gal 20.5 L 40.5 lbs 18.4 kg

37 OS400 Digital Keypad Safe with Printable Audit Trail The OS400 is Onity s most feature-enhanced electronic in-room safe. Its user-friendly operation coupled with a high level of reliability and functionality makes it an ideal safe for any application. Features User Friendly 6-Digit Display 3, 4, 5 or 6-Digit Pin Code Option ADA Compliant "Code to Close" Technology On Hold Time After 4 Wrong Consecutive Attempts (optional) Programmable Shut Down Mode Non-Resident Master Code Audit Trail records the last 1,000 Operations Insertion Protected Door Reinforced Bolt Frame 2 Solid Steel, Anti-Drill Rotating Bolts Anti-Theft Labyrinth Mechanism Portable Programmer Password Protected Four (4) AA Batteries Low-Consumption Motor Power-Status Display Available in 2 sizes Onity All rights reserved. Data subject to change without notice. Internal Dimensions Business Safe Height: Width: Depth: Volume: Height: Width: Depth: Weight: mm mm mm 10.2 Gal 38.6 Lts External Dimensions Business Safe mm mm mm lbs 17 kgs Laptop Safe mm mm mm 7.9 Gal 30 Lts Laptop Safe mm mm mm lbs 16.1 kgs Handheld Computer Emergency Unit (CEU) Non-Resident Master Code Emergency Power Openings Password Protected User Friendly, Large Display Records the last Operations from all safes on property

38 OS200 Digital Keypad Safe with Audit Trail The OS200 is one of Onity s newest electronic in-room safes. Its user-friendly operation coupled with a high level of reliability and functionality makes it an ideal safe for any application. Features User Friendly 6-Digit Green LED Display 3, 4, 5 or 6-Digit Pin Code Option Resident Master Code Master Code Unique to Each Facility Audit Trail on Safe Display: Last 100 Operations Mechanical Key Override On Hold Time After 4 Wrong Consecutive Attempts (optional) 2 Solid Steel, Anti-Drill Rotating Bolts Works with 4 AA Standard Batteries Low Battery Consumption Power-Status Display on Screen ADA-Compliant Keypad "Code to Close" Technology Onity All rights reserved. Data subject to change without notice. Internal Dimensions Laptop Safe Height: Width: Depth: Volume: Height: Width: Depth: Weight: mm mm mm 6.6 Gal 25 Lts External Dimensions Laptop Safe mm mm mm lbs 12.7 kgs

39 Energy Management Solutions Real Solutions Reliable Support

40 Intelligent Technology Central FCU HVAC Room Control Central HVAC system that heats/cools a room by a Fan Coil Unit.(horizontal or vertical) SensorStat All wires are hidden under carpet and behind walls. Flush Mounted MagneticDoor Switch PTAC/Heat Pump Room Control Package Terminal (PTAC) or Heat Pump through-the-wall unit that heats/cools a room. SensorStat Onity All rights reserved. Data subject to change without notice. Senercomm is a registered trademark of Onity. Please note: The SensorStat DDC can control interior and exterior doors. A remote PIR can be added to SensorStat for suite applications. SensorStat is a state-of-the-art digital thermostat and occupancy sensing setback controller. Its intelligent technology manages the energy consumption of HVAC systems such as those in hotels or college residences including: PTAC, Heat Pump, Split Systems, and Fan Coil Units. Since there is a computer chip in each unit, every room actually has its own energy management system. The SensorStat uses two devices that work in conjunction with each another to determine the occupancy status of a room. These devices are a passive infrared (PIR) sensor and a flushmounted door switch. When the door opens and closes, the door switch signals the SensorStat to search for occupants. The PIR senses both body heat and motion, so it only acknowledges people, not blowing curtains or ceiling fans in the room. Once a presence is detected, the SensorStat locks into Occupied Mode giving control of the thermostat to the occupant, then directs the HVAC system to accurately adjust the temperature of the room to the occupant s selected setting. When the occupant leaves the room, the door switch again triggers the PIR in the SensorStat to check for occupants. After it is determined that the room has been unoccupied for a certain number of All wires are hidden under carpet and behind walls. Flush Mounted Magnetic Door Switch minutes (which is selectable), the SensorStat goes into Unoccupied Mode and automatically sets the room temperature back to a comfortable, yet energy-saving level (setback). While in Unoccupied Mode, the PIR continuously searches for motion and if a presence is detected at any time, the SensorStat immediately goes back into Occupied Mode. Setback temperatures are programmable for each individual property s requirements, and they never allow a room to become too cool or warm. This enables the HVAC to quickly recover to the occupant s set temperature when the SensorStat is returned to Occupied Mode.

41 Intelligent Technology Senercomm presents a feature rich line of products with innovative designs and unsurpassed performance. Offered are the most technologically advanced Energy Management Solutions with models for every application. Special Features Refresh Cycle This feature cycles the HVAC unit at set intervals to keep the air in the room circulating. This reduces humidity associated problems and will keep rooms feeling fresh and smelling clean. Soft Bypass The Soft Bypass feature allows you to give complete control of the HVAC to the occupant for the duration of their stay. The energy management system is bypassed with a simple operation. No rewiring is required. Lighting Control A simple relay connection allows the energy management system to turn off lights or other appliances when the sleeping room is unoccupied. Optional Features Onity All rights reserved. Data subject to change without notice. Senercomm is a registered trademark of Onity. PRIVACY PLEASE! Senercomm s Privacy Please! remote occupancy detection system helps avoid unnecessary or embarrassing occupant interruptions. Your occupants remain undisturbed because staff can immediately and discreetly identify occupied rooms. The system consists of a hand held scanner used by your staff to quickly and accurately determine room occupancy status. The SensorStat device in the sleeping room connects to a small red diode in the doorframe which can only be seen using the infrared beam of the hand-held scanner. A red signal indicates an occupied room based on the status of the SensorStat device. A green signal indicates a room is unoccupied, even though a "Do not disturb" sign may have been inadvertently left on the door. This optional module can be used with both the SensorStat 2000 and the SensorStat DDC units. Using Privacy Please! can help increase staff efficiency and productivity as well as occupant satisfaction. PATENTED 5 STAR COMFORT HUMIDITY & CONDENSATION CONTROL Using Senercomm s patented "5 Star Comfort" Humidity Control, occupants can experience the benefits of a room s humidity level being monitored, managed, and reduced. At the same time, it provides greater savings in equipment due to mold and mildew damage. The most favorable conditions for mold and mildew are temperatures above 72 F and relative humidity above 60%. The SensorStat DDC has an optional humidity module that can be added to maintain a room environment outside the mold and mildew zone. In the Unoccupied or Unsold mode, once the SensorStat DDC reaches its summer setback temperature, it reads the room s relative humidity. If the humidity is less than 60%, the SensorStat DDC will function normally to maintain temperature in the room within the setback limits. However, anytime the relative humidity reaches above 60%, the SensorStat DDC will turn on the HVAC system and reduce the temperature to 72 F. The temperature will then be allowed to rise to its setback point, at which point the humidity level is read again. As soon as the relative humidity falls below 60%, the system resumes normal operation; however, if the relative humidity is still above 60% the cycle will be repeated.

42 SensorStat DDC 2-F Features Average Calculated Savings of 25-35% Enhanced Occupant Comfort Attractive, Easy-To-Operate Design Reduced Maintenance Costs and Extended Equipment Life Direct Digital Temperature Control Within 1-Degree Accuracy Selectable Fahrenheit or Celsius Display Automatic or Manual Fan Control Modes Automatic Changeover Heat/Cool Operation Programmable Setback Limits While Room Is Unoccupied Deep Programmable Setback Limits While Room Is Unused Ease of Installation and Replacement Onity All rights reserved. Data subject to change without notice. Senercomm is a registered trademark of Onity. Monitors Interior and Exterior Doors/Windows Refresh Cycle Soft Bypass Humidity Sensing & Control Real Time Clock Backlit LCD Remote Management & Control Capabilities with innpulse Online Communications Network Finally the new standard of intelligence for occupant room comfort and management solutions is here! SensorStat DDC merges digital control with passive infrared (PIR) occupancy sensing, and programmable temperature setbacks to create the latest technology in the industry today. The SensorStat DDC is specifically designed to electronically control HVAC systems, improve occupant comfort, and increase energy efficiency through occupancy-based setback strategies. When upgraded, the SensorStat DDC 2-F provides operational input via a Windows based software system...innpulse. Options High Speed Two-Way Communication (innpulse ) Privacy Please! Hand-Held Programmer Wireless Peripherals SensorStat DDC features a new slim-line housing architecture with a stylish design that is pleasing to the occupant both visually and functionally. It is easy to install and very affordable. In a typical application, the SensorStat DDC is installed on an interior wall and functions as the room thermostat. The SensorStat DDC interfaces with virtually all types of HVAC systems (through-wall PTAC, fan-coil units, or split systems) and replaces existing linevoltage AC/DC thermostats (mechanical or digital) or improves upon existing controls. Part Number BE SensorStat DDC uses the proven logic of monitoring the status of entry doors (open/closed) plus physical occupancy detected by its concealed PIR sensor to positively determine if the room is occupied or unoccupied. Once determined, the automatic setback feature will engage the pre-programmed energy and comfort control functions. In addition to providing complete room HVAC control, the on-line version also communicates over twisted pair providing real time central monitoring and management capabilities via innpulse software.

43 SensorStat DDC 2-F Required Equipment (Per Room) SensorStat DDC 2-F Door Switch (flush or recessed mount) Quick Connect Field Wiring Cable Optional Accessories Privacy Please allows authorized staff members to detect occupancy status from outside the room, without knocking or disturbing occupants. Privacy Please! IR Transmitter (1 per room) Privacy Please! IR Scanner RS485 innpulse communications module Wireless Interface Communication Module for wireless periperals Wireless Door Switch Tranceivers Wireless Remote PIRs, for multi-room suites Onity All rights reserved. Data subject to change without notice. Senercomm is a registered trademark of Onity. Wired Sensor Communication Module Wired Door Switch Tranceivers Wired Remote PIRs, for multi-room suites Wired Remote Temp Sensor Wired Mini-Bar Switch

44 SensorStat Wireless DDC Features 25-35% Average Reduction In Energy Use Battery Powered - Install Anywhere No Wiring Between Devices Backlit LCD Display Reduced Maintenance Costs and Extended Equipment Life Direct Digital Temperature Control Within 1 Degree Accuracy Selectable Fahrenheit or Celsius Display Automatic or Manual Fan Control Onity All rights reserved. Data subject to change without notice. Senercomm is a registered trademark of Onity. Automatic Changeover Heat/Cool Operation Setback Limits Unoccupied Deep Setback Limits Unused Monitors Interior and Exterior, Adjoining Doors and Windows Refresh Cycle Freeze Guard Soft Bypass Wireless - RF Communication Frequency Hopping Spread Spectrum; Internal Antenna Options Wireless Device Area Network Communication Humidity Sensing Remote Temperature Sensor Real Time Clock (RTC) Module (replaces door switch) The SensorStat Wireless DDC system complements our range of DDC series and is the first step to a fully integrated intelligent wireless room. You get the features of an on-line system at the price of stand-alone. The battery powered, wireless control system allows the installation of the Thermostat, door switch(s) and remote PIR sensor(s) without the need for any wire at all between devices. Each device operates wirelessly and is powered by 3 AA batteries. FCC Approved Industry Canada Approved Part Number BW EMS System The Wireless DDC simplifies installation, offering a product that is able to be installed in a fraction of the time needed for a classic wired system. By being wireless, this system will enable installation in retrofit situations where holes cannot be made in the walls - or where the installation cost previously proved to be prohibitive due to construction materials or union issues. The various elements of the system communicate with each other completely wire free.

45 SensorStat DDC Savings Opportunities With your standard thermostats, these situations cost you enormous amounts of money: With SensorStats, these situations are opportunities for savings: Onity All rights reserved. Data subject to change without notice. Senercomm is a registered trademark of Onity. Occupant Departure: Sunday, 11am Your occupants check out. The thermostat is left on High Cool. Thursday, 6pm Your new occupants check in to an uncomfortably cold room and you ve wasted money cooling an unsold space for 4 days. Housekeeping: Monday, 10am The housekeeper enters the room and turns down the thermostat while cleaning. Monday, 10:15am The housekeeper leaves the room. Monday, 6:30pm Your occupant returns to an uncomfortably cold room and you ve wasted money cooling an unoccupied space all day. Windows: Wednesday, 1pm Your occupant opens the window and forgets to close it. Wednesday, 2pm Your occupant leaves with the heater running. Wednesday, 11pm Your occupant returns and you ve been heating the parking lot for 9 hours. Occupant Departure: Sunday, 11am Your occupants check out. The thermostat is left on High Cool. Sunday, 11:08am SensorStat, after scanning for occupancy, goes into Setback Mode setting the temperature to an energy saving level. Monday, 3am SensorStat, after noting that the room is still unoccupied, goes into Deep Setback Mode increasing the energy savings. Thursday, 6pm Your new occupants check in to a comfortable room and you ve saved money on 4 days cooling costs. Housekeeping: Monday, 10am The housekeeper enters the room and turns down the thermostat while cleaning. Monday, 10:15am The housekeeper leaves the room. Monday, 10:23am SensorStat, after scanning for occupancy, goes into Setback Mode. Monday, 6:30pm Your occupant returns to a comfortable room and you ve saved money on 8 hours cooling costs. Windows: Wednesday, 1pm Your occupant opens the window and forgets to close it. Wednesday, 20 Seconds Later The HVAC shuts off. Wednesday, 2pm Your occupant leaves with the window open. Wednesday, 11pm Your occupant returns and closes the window. SensorStat turns the HVAC on and returns the room to the temperature set by the occupant.

46 SensorStat DDC Savings Opportunities The principle behind an energy management device in a sleeping room is reducing energy waste when the room is unoccupied without compromising comfort while the occupant is in the room. Consider that up to 80% of your occupant room utility bill is the HVAC even though occupants typically occupy rooms for only 10 hours out of every 24. This adds up to an excellent opportunity for savings. SensorStat is a state-of-the-art energy management device with an occupancy sensing setback controller. It uses a passive infrared (PIR) sensor and a flushmounted door switch that work in conjunction with each another to positively determine the occupancy status of a room. When physical presence is detected, the SensorStat gives control of the HVAC to the occupant. When the occupant leaves the room, the SensorStat automatically sets the room temperature back to a comfortable, yet energy-saving level (setback). This setback level is generally 5-7 degrees away from the occupant s selected temperature, providing an average reduction in energy usage of 20-25%. Each degree translates to 3.33% savings in energy usage. In addition, there is a second level of savings where the setback is even deeper once a room has been determined to be unsold. All setbacks are programmable by the property to allow for maximum flexibility. These energy savings levels, as well as operational efficiencies provide a rapid return on investment. The typical payback period is only months. Other indirect savings may further improve the ROI. For example, SensorStat reduces expenditures for FFE, extends the life of your HVAC equipment, reduces HVAC filter maintenance and other repair costs, and increases occupant comfort... which encourages a return stay. ENERGY SAVINGS ESTIMATOR Onity All rights reserved. Data subject to change without notice. Senercomm is a registered trademark of Onity. Onity/Senercomm offers a unique Energy Savings Estimator software program that can quickly provide a savings profile customized for your property where electricity is used to heat and cool Total first year savings = $25, USD Highest monthly savings = $3, USD Lowest monthly savings = $ USD occupant rooms. The results estimate the average monthly savings and Return on Investment when using the SensorStat devices. Sample Conditions 200 Room Property with PTAC units avg. square feet per room.075 per kwh USD 65% avg. occupancy Total Investment = $45, USD Total first year savings = $25, USD First year monthly savings = $2, USD Total 5 year savings (after cost) = $84, USD System payback occurs after 20.9 months.

47 innpulse Features 30-40% Average Reduction In Energy Use Microsoft Windows Compatible Room Environment Monitoring Property and Resident Room Management Detect HVAC Trouble Predictive Maintenance Real Time Management Reports Control HVAC Setback Automatically Patented 5 Star Humidity & Condensation Control Engineering Default Alarms Security Monitoring Reduce Mini Bar Labor Privacy Please! Additional Productivity Savings Onity All rights reserved. Data subject to change without notice. Senercomm is a registered trademark of Onity. Surpassing typical energy management systems, innpulse Operations Manager is an advanced in-room information system with innovative features designed specifically to reduce operations expenses, improve occupant services, and closely monitor facility occupant room information in your property. innpulse is Windows network compatible. innpulse provides a total sleeping room information and management system which benefits engineering, food and beverage, security, front office, and housekeeping operations. innpulse virtually manages and monitors your sleeping room operations 24 hours a day, even when you are not there. The innpulse Operations Manager expands your in-room services into an interactive, on-line communication network. innpulse directly links your electronic locks, safes, mini-bars, smoke detectors, and H V A C system with individual departments throughout the property via existing cable TV wiring. innpulse provides management with on-line alarms, control functions, and operational reports. At the heart of innpulse is the SensorStat DDC, a smart, programmable HVAC controller and occupancy based digital thermostat. Keeping your expenses down and occupants comfortable, while staying ahead of the competition is today s challenge. In addition to providing the ultimate in occupant comfort, innpulse will help your managers reduce labor costs, control excessive energy consumption, and extend the efficiency and longevity of your furniture, fixtures, and equipment. Now more than ever, it is easier and less expensive to reduce operating expenses, improve occupant comfort and, at the same time, increase the return on your total investment with the innpulse Operations Manager.

48 innpulse Using your existing cable wire, innpulse continually transmits data from guest and resident room devices to multiple departments around your property. innpulse is not just a one way street, staff can use innpulse to communicate with and remotely program various devices in the room, locate staff and much more. innpulse can also interface with Property Management and Resident Room Management Systems. It is Windows compatible easy to learn easy to operate.and allows your staff to manage your property efficiently. Onity All rights reserved. Data subject to change without notice. Senercomm is a registered trademark of Onity. Engineering & Energy Management System Demand Control Room Environment Efficiency HVAC Equipment Efficiency Automatic Load Shedding (kw) Location of staff Property Management System or Resident Room Management System Housekeeping Status Room Temperature & Humidity Room Precool/Preheat Room Inspection & Ready-to-sell Minibar Lockout Housekeeping Staff Tracking & Productivity Room Occupancy Room Cleaned Status Location of staff General Management Property Alarm Status Staff Productivity Reporting Property Occupancy Profiles Energy Usage Analysis Equipment Performance Location of staff Food & Beverage Minibar Restock Status Location of staff Security Door Latch Alarm Smoke & Panic Button Alarms In-room Safe Monitoring Door Locks Interrogation & Safe Audit trails ROOM DEVICES SEND AND RECEIVE DATA PROPERTY DEPARTMENTS MONITOR INFORMATION AND SEND COMMANDS SINGLE-STATION AND MULTI-USER VERSIONS AVAILABLE