Engines & Gen-sets N, page 1 of 6
|
|
- Willa Cannon
- 6 years ago
- Views:
Transcription
1 Uni-line ANSI code 27, 59 ANSI code 59 ANSI code 27 RMV-112D RMV-122D RMV-12D Under- /overvoltage protection: Overvoltage protection (2 levels Undervoltage protection (2 levels 1 minimum and 1 maximum relay output Settings: ±20% of U nom Settings: 0 +20% of U nom 2 minimum relay outputs Settings: 0-20% of U nom, phase wire, Υ, phase 4 wire, phase wire, Υ, phase 4 wire, phase wire, Υ, phase 4 wire ANSI code 27, 59 RMV-142D Under- /overvoltage protection: 1 minimum and 1 maximum relay output Settings: ±20% of U nom 2 phase, single phase Engines & Gen-sets N, page 1 of 6 DEIF A/S, Frisenborgvej, DK-7800 Skive, Tel.: , Fax: , info@deif.com, URL:
2 Uni-line Uni-line RMC-111D RMC-121D RMC-122D Short circuit relay: short circuit protection Short circuit current relay: short circuit protection Overcurrent and short circuit relay: short circuit/overcurrent protection Setting: % of I nom Delay: 0.1 1/5/10 s with 2 sets of contacts Setting: % of I nom Delay: 0.1 1/5/10 s Settings: % of I nom, % of I nom Delay: 0.1 1/5/10 s, /60/120 s phase phase phase ANSI code 87 ANSI code 50N, 51N RMC-11D RMC-12D RMC-142D Differential current relay: protection against short circuits and leakage current in the generator winding with 2 sets of contacts Settings: 4 40% of I nom Delay: 0.1 1/5/10 s Dual overcurrent relay: overcurrent protection Stator earth fault relay: earth fault protection at 2 level built-in filter for rd harmonic Settings: % of I nom Delay: /60/120 s Settings: 2 20%, % of I nom Delay: /60/120 s phase phase Engines & Gen-sets N, page 2 of 6 DEIF A/S, Frisenborgvej, DK-7800 Skive, Tel.: , Fax: , info@deif.com, URL:
3 Uni-line ANSI code 2 ANSI code 2 ANSI code 2 RMP-111D RMP-112D RMP-121D Overload relay: overload protection of generator and prime mover real power relay Overload/reverse power relay: combined overload and reverse power protection protection against motoring Reverse power relay: motoring protection of generator and prime mover Settings: % of P nom 2W, phase wire unbal. load W, phase wire unbal. load W4, phase 4 wire unbal. load 1 max. + 1 min. relay output Settings: %,-0-25% of P nom 2W, phase wire unbal. load W, phase wire unbal. load W4, phase 4 wire unbal. load 1 minimum relay output Settings:-0-25% of P nom 1W, single phase 1W, phase wire bal. load 1W4, phase 4 wire bal. load ANSI code 2 ANSI code 2 RMQ-111D Loss of excitation relay: protection of generators against loss of excitation RMQ-121D Overexcitation relay: protection of generator against overexcitation (over var) Settings: % of Q nom 1var, phase wire bal. load 1var4, phase 4 wire bal. load Settings: % of Q nom 1var, phase wire bal. load 1var4, phase 4 wire bal. load Engines & Gen-sets N, page of 6 DEIF A/S, Frisenborgvej, DK-7800 Skive, Tel.: , Fax: , info@deif.com, URL:
4 Uni-line Uni-line ANSI code 81 ANSI code 78 ANSI code 78 RMF-112D LMR-111D LMR-122D Frequency relay: combined underfrequency/overfrequency protection Loss of mains relay: detection of vector shift generator disconnection on mains failure Loss of mains relay: detection of vector shift detection of ROCOF (df/dt) 1 min. and 1 max. relay output Settings: ±10% of f nom, ±20% of f nom at f nom = 55Hz Delay: 0 10 s Nom. frequency: 50Hz, 55Hz, 60Hz 2 relay outputs Settings: 2 20 electr. deg. Delay: s 2 relay outputs Settings: 2 20 electr. deg. / 0. 5 Hz/s Delay: s 2 phase, single phase 2 phase, single phase 2 phase, single phase ANSI code 27, 59, 78, 81 G59 Protection relay package: combined vector shift and ROCOF protection of over-/underfrequency phase protection of over-/undervoltage 4 relay outputs, setting of set point: 2 20 electr. deg. / 0. 5 Hz/s / % of f n / % of f n / % of U n / % of U n Hysteresis: 1 10% of U n 2 phase, single phase: Vector shift, ROCOF, frequency, phase wire, U, phase 4 wire: Voltage Engines & Gen-sets N, page 4 of 6 DEIF A/S, Frisenborgvej, DK-7800 Skive, Tel.: , Fax: , info@deif.com, URL:
5 Uni-line ANSI code 25 ANSI code 25 FAS-11DG FAS-115DG Synchroniser: synchronisation of generator to busbar circuit breaker time compensation Synchroniser: synchronisation of generator to busbar voltage matching circuit breaker time compensation Synch. pulse output: 1 relay output Freq. control outputs: 2 relay outputs Synch. pulse output: 1 relay output Freq. control outputs: 2 relay outputs Voltage control: 2 relay outputs 2 phase, single phase 2 phase, single phase ANSI code 25 ANSI code 18 HAS-111DG EPN-110DN Paralleling relay: synchronisation of generator to busbar setting of phase angle setting of maximum frequency and voltage difference Electronic potentiometer: control of electronic governor setting of integrating time adjustment of output signal Synch. pulse output: 1 relay output 1 analogue output Settings: 0 ±1V/0 ±5V 2 phase, single phase Engines & Gen-sets N, page 5 of 6 DEIF A/S, Frisenborgvej, DK-7800 Skive, Tel.: , Fax: , info@deif.com, URL:
6 Uni-line Uni-line LSU-112DG LSU-11DG LSU-114DG Load sharing unit: built-in power and freq. transducer constant power or isochronous mode Load sharing unit: reverse power protection and low power detection built-in power and freq. transducer constant power or isochr. mode Speed control: 2 relay outputs Speed control: 2 relay outputs Reverse power protection: 1 relay output, fixed settings: -P> 5% / 5 s, -P> 5% / 10 s, -P> 10% / 5 s or -P> 10% / 10 s Low power detect.: 1 relay output, fixed setting: P<5% Load sharing unit: automatic start/stop outputs built-in power and freq. transducer constant power or isochronous mode 1W, phase wire bal. load 1W, phase wire bal. load Speed control: 2 relay outputs Start/stop: 2 relay outputs, fixed settings: P>80%, P<20% 1W, phase wire bal. load LSU-122DG var load sharing unit: built-in reactive power transducer control of AVR input for external voltage transducer Voltage control: 2 relay outputs 1var, phase wire bal. load Engines & Gen-sets N, page 6 of 6 DEIF A/S, Frisenborgvej, DK-7800 Skive, Tel.: , Fax: , info@deif.com, URL:
DEIF A/S. Description of options. Option C1 Generator add-on protection package Multi-line 2 version 2. Description of options. Functional description
Description of options Option C1 Generator add-on protection package Multi-line 2 version 2 4189340267E SW version 2.42.X Description of options DEIF A/S Functional description Parameter list DEIF A/S,
More informationGenerator Protection Unit, GPU Hydro Multi-line A SW version 2.4X.X
Multi-line 2 4921240335A SW version 2.4X.X Standard functions Applications Measuring system DEIF A/S Generator protection for hydro turbine driven generators Functions 2 sets of alarm set points Alarm
More informationDEIF A/S. Generator Paralleling Controller multi-line L. Type GPC / GS. Compact system in one unit
Compact system in one unit Generator Paralleling Controller multi-line 2 4921240189L Generator synchronisation, protection and control True 3-phase RMS measurements, voltages and currents galvanically
More informationSPARE PART ONLY. Basic Gen-set Controller Multi-line H SW version 2.31.X or later. Data sheet. Standard functions
Multi-line 2 492124027H SW version 2.1.X or later DEIF A/S Applications AMF (no synchronising) Island mode (stand alone) Generator controls Engine start/stop Configurable start sequence Protection and
More informationBasic Gen-set Controller multi-line F SW version 2.31.X or later
multi-line 2 492124027F SW version 2.1.X or later Standard functions DEIF A/S Applications AMF (no synchronising) Island mode (stand alone) Generator controls Engine start/stop Configurable start sequence
More informationDEIF A/S. Description of options. Option A and B, Loss of mains protection package Automatic Gen-set controller. Description of options
Description of options Option A and B, Loss of mains protection package Automatic Gen-set controller 4189340394B SW 2.3X.X Description of options Functional descriptions DEIF A/S Parameter list DEIF A/S,
More informationMULTI-LINE 2 APPLICATION NOTES. Converting PPU-2 to PPU-3 Parameter conversion Wiring Options I/O list. Document no.: A SW version:
MULTI-LINE 2 APPLICATION NOTES Converting PPU-2 to PPU-3 Parameter conversion Wiring Options I/O list DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com www.deif.com
More informationDATA SHEET Selectable AC transducer, TAS-331DG
DATA SHEET Selectable AC transducer, TAS-331DG Measures power or reactive power on 3-phase AC networks Class 0.5 (IEC-688) measurement Supply and measuring voltage up to 690 V Easy configuration via PC
More informationDEIF A/S. Description of options. Option P1, Event and alarm printer Automatic Gen-set Controller. Description of option. Functional description
Description of options Option P1, Event and alarm printer Automatic Gen-set Controller 4189340377B SW version 2.1X.X Description of option DEIF A/S Functional description Parameter list DEIF A/S, Frisenborgvej
More informationAutomatic Gen-set Controller Multi-line D
Multi-line 2 4921240295D SW version.20.0 or later Standard functions Operation modes Automatic mains failure Island operation Fixed power/base load Peak shaving Load take over Mains power export Push-buttons
More informationAGC 200 Automatic Advanced Gen-set Controller DATA SHEET
200 Automatic DATA SHEET Operation modes Automatic mains failure/ats Island operation Fixed power/base load Peak shaving Load takeover Mains power export Multiple gen-set load sharing (128) Display and
More informationGenerator Paralleling Controller, GPC-3 DATA SHEET
DATA SHEET Regulation modes Load sharing Fixed frequency Fixed power Frequency droop Generator protection (ANSI) 2 x reverse power (32) 5 x overload (32) 6 x overcurrent (50/51) 2 x overvoltage (59) 3
More informationMULTI-LINE 2 APPLICATION NOTES
MULTI-LINE 2 APPLICATION NOTES Converting PPM-2 to PPM 300 Parameter conversion Wiring Options I/O list Modbus DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com
More informationDATA SHEET Selectable AC transducer, TAS-321 DG
DATA SHEET Selectable AC transducer, TAS-321 DG Bi-directional current measurement on AC networks Power measurement using 2 phases on 3-phase networks Class 0.5 (IEC688) measurement Easy configuration
More informationCompact Genset Controller, CGC 400 Generator control and protection Engine monitoring and protection Generator and mains breaker control RS485 Modbus
DATA SHEET Compact Genset Controller, CGC 400 Generator control and protection Engine monitoring and protection Generator and mains breaker control RS485 Modbus DEIF A/S Frisenborgvej 33 DK-7800 Skive
More informationMulti-instrument Communication, MIC-2 MKII DIN Quick Start Guide
Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Warnings and legal information Installation and terminals Communication I/O options Alarming Utility software More information Specifications
More informationOption P1 Event and alarm printer Description of option Functional description Parameter list
MULTI-LINE 2 DESCRIPTION OF OPTIONS Option P1 Event and alarm printer Description of option Parameter list DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com www.deif.com
More informationAutomatic Genset Controller, AGC-4 What s in the delivery? Getting started The first steps Using the AGC
QUICK START GUIDE Automatic Genset Controller, AGC-4 What s in the delivery? Getting started The first steps Using the AGC DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615
More informationAutomatic Genset Controller, AGC-3 What's in the delivery Getting started The first steps Using the AGC
QUICK START GUIDE Automatic Genset Controller, AGC-3 What's in the delivery Getting started The first steps Using the AGC DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615
More informationAdvanced Genset Controller, AGC 200 Operation modes Display and unit front General Engine control M-Logic Optional applications
DATA SHEET Advanced enset Controller, 200 Operation modes Display and unit front eneral Engine control M-Logic Optional applications DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45
More informationMulti-instrument Communication, MIC-2 MKII DIN Quick Start Guide
Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Warnings and legal information Installation and terminals Communication I/O options Alarming Utility software More information Specifications
More informationDelomatic 4, DM-4 Marine & Offshore DATA SHEET
Delomatic 4, DATA SHEET Application Power management control and protection of complex marine and offshore applications including diesel, gas and turbine generators, as well as tie breakers and shore connections
More informationNOT RECOMMENDED FOR NEW DESIGNS
DATA SHEET DELOMATIC 4, DM-4 Gas Gas engine control Integrated speed governor Integrated air/gas mix control Combined heat and power control Generator control and monitoring Mains failure protections integrated
More informationGenerator Protection Unit, GPU-3 DATA SHEET
DATA SHEET Generator Protection (ANSI) 2 x reverse power (32) 5 x overload (32) 6 x overcurrent (50/51) 2 x overvoltage (59) 3 x undervoltage (27) 3 x over-/underfrequency (81) Voltage dependent overcurrent
More informationDEIF A/S. TAS-331DG Selectable AC transducer G (UK) Installation and start up instructions. Watt or var transducer
Installation and start up instructions TAS-331DG Selectable AC transducer 4189300008G (UK) Watt or var transducer Supply and measuring voltage up to 690V DEIF A/S Configuration via PC-interface possible
More informationAutomatic Genset Controller, AGC-4 What s in the delivery? Getting started The first steps Using the AGC
QUICK START GUIDE Automatic Genset Controller, AGC-4 What s in the delivery? Getting started The first steps Using the AGC DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000KD Revision No: 1 This is to certify: That the Electrical Measuring and Protection Relay with type designation(s) PPU-3, GPU-3 - Generator Controllers
More informationGenerator Protection Unit, GPU-3 DATA SHEET
DATA SHEET Generator protection (ANSI) 2 x reverse power (32) 5 x overload (32) 6 x overcurrent (50/51) Inverse time overcurrent (51) 2 x overvoltage (59) 3 x undervoltage (27) 3 x over-/underfrequency
More informationAdvanced Genset Controller, AGC 200 Operation modes Display and unit front General Engine control M-Logic Optional applications
DATA SHEET Advanced enset Controller, 200 Operation modes Display and unit front eneral Engine control M-Logic Optional applications DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45
More informationDATA SHEET IOM 200 analogue interface for AGC 200
DATA SHEET IOM 200 analogue interface for AGC 200 CAN interface to AGC 200 series TTL interface to PC LED indicators for unit and CANbus status GOV/AVR outputs selectable for DC current or DC voltage DEIF
More informationGenerator Paralleling Controller, GPC-3 Gas Regulation modes Generator protection (ANSI) M-Logic (Micro PLC) Busbar protection (ANSI) Display General
DATA SHEET Generator Paralleling Controller, GPC-3 Gas Regulation modes Generator protection (ANSI) M-Logic (Micro PLC) Busbar protection (ANSI) Display General DEIF A/S Frisenborgvej 33 DK-7800 Skive
More informationDEIF A/S. Description of options. Option C2, Generator add-on protection package Automatic Gen-set Controller. Description of option
Description of options Option C2, Generator add-on protection package Automatic Gen-set Controller 4189340345C SW version 2.1X.X Description of option Functional description DEIF A/S Parameter list DEIF
More informationAGC 200 Advanced Gen-set Controller What s in the delivery? Getting started The first steps Using the AGC 200
QUICK START GUIDE AGC 200 Advanced Gen-set Controller What s in the delivery? Getting started The first steps Using the AGC 200 DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614
More informationDATA SHEET. AGC PM Automatic Genset Controller, Plant Management
DATA SHEET AGC PM Automatic Genset Controller, Plant Management Management of up to 992 gensets Island and parallel operation Plant black start capabilities Fuel-optimised control Integrated genset protection
More informationQUICK START GUIDE Generator Paralleling Controller, GPC-3 Generator Protection Unit, GPU-3/GPU-3 Hydro Paralleling and Protection Unit, PPU-3
QUICK START GUIDE Generator Paralleling Controller, GPC-3 Generator Protection Unit, GPU-3/GPU-3 Hydro Paralleling and Protection Unit, PPU-3 What's in the delivery? Getting started The first steps PC
More informationDATA SHEET Automatic Genset Controller, AGC-3
DATA SHEET Automatic enset, AC-3 Operation modes Engine control enerator protection (ANSI) Display /busbar protection (ANSI) M-Logic (Micro PLC) eneral DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45
More informationGenerator Paralleling Controller, GPC-3 Regulation modes Generator protection (ANSI) M-Logic (Micro PLC) Busbar protection (ANSI) Display General
DATA SHEET Generator Paralleling Controller, GPC-3 Regulation modes Generator protection (ANSI) M-Logic (Micro PLC) Busbar protection (ANSI) Display General DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.:
More informationMULTI-LINE 2 APPLICATION NOTES. Converting PPM-2 to PPM-3 Parameter conversion Wiring Options I/O list Modbus. Document no.: A SW version:
MULTI-LINE 2 APPLICATION NOTES Converting to Parameter conversion Wiring Options I/O list Modbus DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com www.deif.com
More informationInstallation Manual. Multi Power Controller MPC-1 multi-line D
Installation Manual Multi Power Controller MPC-1 multi-line Complete control system in one package: - island operation - parallel with mains operation - emergency generator control 3-phase AC measurements
More informationPPU Power Management (PPM)
PPU anagement (PP) 4921240291H Standard functions DEIF A/S management Load dependent start/stop Programmable start priority Heavy consumer control Blackout start sequence Supervision/control of a shore
More informationGenerator Protection Unit, GPU-3 Generator protection (ANSI) Busbar protection (ANSI) M-Logic (Micro PLC) Display General
DATA SHEET Generator Protection Unit, GPU-3 Generator protection (ANSI) Busbar protection (ANSI) M-Logic (Micro PLC) Display General DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45
More informationAGC 200 Advanced Gen-set Controller DATA SHEET
AGC 200 Advanced Gen-set Controller DATA SHEET Operation modes Automatic mains failure Island operation Fixed power/base load Peak shaving Load take over Mains power export Protection (ANSI) 5 x Overload
More informationDATA SHEET Paralleling and Protection Unit, PPU-3
DATA SHEET Paralleling and Protection Unit, PPU-3 Regulation modes Generator protection M-Logic (Micro PLC) Busbar protection Free PC utility software Approved by all major classification societies DEIF
More informationBasic Gen-set Controller G (UK) SW version 2.1X.X. Terminal strip overview
Basic Gen-set Controller 4189340302G (UK) SW version 2.1X.X Mounting Board slot positions Terminal strip overview DEIF A/S I/O lists Wiring DEIF A/S, Frisenborgvej 33 Tel.: +45 9614 9614, Fax: +45 9614
More informationGenerator Protection Unit, GPU-3 Gas Generator protection (ANSI) Busbar protection (ANSI) M-Logic (Micro PLC) Display General
DATA SHEET Generator Protection Unit, GPU-3 Gas Generator protection (ANSI) Busbar protection (ANSI) M-Logic (Micro PLC) Display General DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax:
More informationMultiple Generator Automatic Synchronising System
R Millennium Power Manufacturing Corp. R Multiple Generator Automatic Synchronising System Synchronising System Type Choice Independent Control Cabinet Type Feature: Independent Control Cabinet Type Functions:
More informationDEIF A/S. MIC Multi-instrument G. Data sheet. Features. Accuracy. Measurements. Installation. Intelligent. Display. Communication DEIF A/S
Multi-instrument 4921210107G Features Measurements All 3-phase AC measurements True RMS Replaces analogue meters Intelligent Suitable for all 3-phase network topologies Replaces transducers Accuracy U,
More informationQUICK START GUIDE Paralleling and Protection Unit PPU 300
QUICK START GUIDE Paralleling and Protection Unit PPU 300 DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com www.deif.com Document no.: 4189341107B 1. Introduction
More informationGC2000 Generator Controller Power Management and Protection
GC2000 Generator Controller Power Management and Protection Control. Monitor. Protect. A powerful generator controller and power management system for marine and offshore applications SELCO s GC2000 provides
More informationRTC 300/RTC 600 Installation instructions scan
RTC 300/RTC 600 Installation instructions DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com www.deif.com Document no.: 4189350071A SW version: 1. 1.1. Introduction...3
More informationDelomatic 4, DM-4 Land DATA SHEET
Delomatic 4, DATA SHEET Application Features Power Management control and protection of complex power systems including diesel, gas and turbine generators, as well as mains and tie breakers Highly flexible
More informationTWO-WINDING TRANSFORMER DIFFERENTIAL
E3-TR PROTECTION WITH AUTOMATIC VOLTAGE Because of the control, measuring and monitoring functions implemented, the IED can also be used as a bay control unit. The EuroCAP configuration tool, which is
More informationSubstation Automation Products. Generator protection REG670/650 Relion 670 and 650 series
Substation Automation Products Generator protection REG670/650 Relion 670 and 650 series A new protection standard for your valuable assets Based on ABB s extensive experience, REG670 and REG650 IEDs (Intelligent
More informationGenerator Controller GC-1F
Controller 4921240310D Standard functions DEIF A/S Engine control Start preparation (preheating or prelubrication) Start/stop sequences with selectable no. of start attempts Fuel solenoid selection (coil
More informationQUICK START GUIDE Generator Protection Unit GPU 300
QUICK START GUIDE Generator Protection Unit GPU 300 DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 Info@deif.com www.deif.com Document no.: 4189341035A 1. Introduction 1.1
More informationGenerator Controller GC-1
4921240293F Standard functions DEIF A/S Engine control Start preparation (preheater or prelubrication) Start/stop sequences with selectable no. of start attempts Fuel solenoid selection (coil type) Idle
More informationSR489 SR489. Generator Management Relay. Economical protection, metering, and monitoring functions for small and medium sized generators.
SR489 Generator Management Relay Economical protection, metering, and monitoring functions for small and medium sized generators. 1 Product Highlights Inputs / Outputs Generator Protection Power Metering
More informationQUICK START GUIDE Paralleling and Protection Unit PPU 300
QUICK START GUIDE Paralleling and Protection Unit PPU 300 DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com www.deif.com Document no.: 4189341107C 1. Introduction
More informationDATA SHEET Rudder/azimuth angle Transmitter CAN, RTC 300/RTC 600
DATA SHEET Rudder/azimuth angle Transmitter CAN, RTC 300/RTC 600 CANopen interface Measuring angle full +/-180 High accuracy Easy zero and CW/CCW adjustm. Continuous shaft rotation DEIF A/S Frisenborgvej
More informationEngine Control Unit, ECU 100 Engine control Engine monitoring and protection Easy-to-read graphical display Integrated emulation software solution
DATA SHEET Engine Control Unit, ECU 100 Engine control Engine monitoring and protection Easy-to-read graphical display Integrated emulation software solution DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.:
More informationDATA SHEET Genset Controller, GC-1F
DATA SHEET Genset Controller, Engine control Generator monitoring Generator protection (ANSI) Mains monitoring Mains protection (ANSI) Engine monitoring Display panel DEIF A/S Frisenborgvej 33 DK-7800
More informationPPM Protection and Power Management DATA SHEET
PPM DATA SHEET Power Management Multiple master system Redundant internal communication Load-dependent start/stop Fuel optimisation logic Programmable start priority Heavy consumer control Blackout start
More informationDATA SHEET Automatic Genset Controller, AGC-4
DATA SHEET Automatic enset, AC-4 Single or synchronising gensets Power plant control Fast synchronising Control and protection Customised logic and control SW emulation of application DEIF A/S Frisenborgvej
More informationNo longer for sale. Generator Controller GC-1. Data sheet. Standard functions
4921240293F DEIF A/S Engine control Start preparation (preheater or prelubrication) Start/stop sequences with selectable no. of start attempts Fuel solenoid selection (coil type) Idle speed control Local
More informationMIC-2 MKII & MIC-2 MKII DIN, Multi-instrument DATA SHEET
& DIN, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationOPERATOR'S MANUAL Generator Paralleling Controller, GPC-3 - Generator Protection Unit, GPU-3/GPU-3 Hydro - Paralleling and Protection Unit, PPU-3
OPERATOR'S MANUAL Generator Paralleling Controller, GPC-3 - Generator Protection Unit, GPU-3/GPU-3 Hydro - Paralleling and Protection Unit, PPU-3 Display and push-button functions Alarm handling Log list
More informationPROTECTION, AUTOMATION & CONTROL
PROTECTION, AUTOMATION & CONTROL 1. DTIVA The members of the DTIVA product line are configured to protect and control the elements of not solidly grounded radial networks. Here the application of Petersen
More informationMIC-2 Multi-instrument DATA SHEET
Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional) Profibus DP (optional) I/O modules
More informationAPPLICATION NOTES H-coupling
APPLICATION NOTES H-coupling Application description Functional description Wiring Basic setup Flowcharts Document no.: 4189340548A SW version 3.3X.X or later Table of contents 1. WARNINGS AND LEGAL INFORMATION...
More informationProtector Trip Relays ENERGY DIVISION
Protector Trip Relays ENERGY DIVISION Protector Trip Relays An extensive range of electronic control products providing continuous monitoring and protection of any electrical parameter. When the monitored
More informationOption M2 Configurable engine control cards Multi-line 2 version B SW version 2.4X.X
Description of options Option M2 Configurable engine control cards Multi-line 2 version 2 4189340482B SW version 2.4X.X Description of options Functional description DEIF A/S Display units Additional functions
More informationApplication Notes on Generator Protection Schemes
Application Notes on Generator Protection Schemes Single Line Diagram Examples 1. Introduction The application notes provide selected single line diagrams for the SIPROTEC 4 generator protection device
More informationEngine Controller EC-1
Engine Controller 4921240292E Standard functions Engine control Engine monitoring DEIF A/S Start preparation (preheater or prelubrication) Start/stop sequences with selectable no. of start attempts Fuel
More informationEngine Control Unit, ECU 100 Engine control Engine monitoring and protection Easy-to-read graphical display Integrated emulation software solution
DATA SHEET Engine Control Unit, ECU 100 Engine control Engine monitoring and protection Easy-to-read graphical display Integrated emulation software solution DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.:
More informationDATA SHEET Compact Genset Controller, CGC 200
DATA SHEET Compact Genset Controller, CGC 200 Auto start and parameter monitoring Warnings and shutdown protections Includes 5 digital inputs, 5 relay outputs Configurable for other applications Licence-free
More informationAPU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET
APU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET Measurement input, auto range Up to 1000 V AC L-L Up to 12.5 A (sinusoidal) 16 400 Hz Output Up to four analogue outputs Relay output RS 485 Modbus
More informationEngine & Genset Controls Z, page 1 of 12
Multi Differential Relay, MDR-2 Generator Protection Unit, GPU-2 Paralleling and Protection Unit, PPU-2 Multi Differential Relay for protection against short circuits and currents Engine and generator
More informationOption H3 Serial communication Profibus DP
MULTI-LINE 2 DESCRIPTION OF OPTIONS Option H3 Serial communication Profibus DP Description of option Functional description Parameters Data tables Document no.: 4189340443H Multi-line 2 Option H3, Serial
More informationXDi-Standard virtual indicator libraries B DEIF A/S. DEIF A/S, Frisenborgvej 33 Tel.: , Fax:
XDi-Standard virtual indicator libraries 4189350067B DEIF A/S DEIF A/S, Frisenborgvej 33 Tel.: +45 9614 9614, Fax: +45 9614 9615 DK-7800 Skive, Denmark E-mail: info@deif.com, URL: www.deif.com Table of
More informationAutomatic Sustainable Controller, ASC Mounting Board slot positions Terminal strip overview I/O lists Wiring
INSTALLATION INSTRUCTIONS Automatic Sustainable Controller, ASC Mounting Board slot positions Terminal strip overview I/O lists Wiring DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45
More informationProtection relays.
Protection relays www.vamp.fi Vamp Ltd Vamp Ltd, with a strong experience of designing devices, is an independent supplier of relays and monitoring equipment. The company has an established reputation
More informationDEEP SEA ELECTRONICS PLC
DEEP SEA ELECTRONICS PLC Guide to Synchronising and Load Sharing PART 1 Usage and configuration of the 55x in synchronisation / load sharing systems. Author: - Anthony Manton DSE Guide to Synchronising
More informationCrompton Instruments Protector Trip Relays
Crompton Instruments Protector Trip Relays Protector Trip Relays An extensive range of electronic control products providing continuous monitoring and protection of any electrical parameter. When the
More informationPGC 4000v2 POWER GENERATION CONTROLLER
PGC 4000v2 POWER GENERATION CONTROLLER THOMSON POWER SYSTEM PGC 4000v2 OFFERS THE FOLLOWING: Superior control & monitoring system for Thomson Power Systems advanced Series 2400 Switchgear (refer to separate
More informationMIC-2 MKII I/O module user s manual
DESCRIPTION OF OPTIONS I/O module user s manual DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com www.deif.com Document no.: 4189320032D Legal information and
More informationCompact Genset Controller, CGC 400 What's in the delivery? The first steps Push-buttons and LEDs
QUICK START GUIDE Compact Genset Controller, CGC 400 What's in the delivery? The first steps Push-buttons and LEDs DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com
More informationPanorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer
USER'S MANUAL Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer DEIF A/S Frisenborgvej 33 DK-7800 Skive
More informationMaximize protection. Sepam series 10, 20, 40, 60, 80. Modular range of digital protection relays
Maximize protection Sepam series 10, 20, 40, 60, 80 Modular range of digital protection relays Fast Dependable Simple Increase energy availability 100% available energy Fast response Maximum dependability
More informationDATA SHEET Applicable for offshore or nearshore
AWC 400 Advanced Wind Turbine Controller DATA SHEET Applicable for offshore or nearshore environments Unrivalled robustness 5-year warranty Open programming in ANSI C/C and IEC63-3 DEIF A/S Frisenborgvej
More informationXE2 DC current relay for loss of excitation protection. Manual XE2 (Revision A)
XE2 DC current relay for loss of excitation protection Manual XE2 (Revision A) Woodward Manual XE2 GB Woodward Governor Company reserves the right to update any portion of this publication at any time.
More informationDATA SHEET. Advanced Power Meter, APM 380 & APM 305
DATA SHEET Advanced Power Meter, APM 380 & APM 305 Easy installation Monitors all 3 phases 5 optional communication interfaces Phase error detection Low power consumption Two-pulse output DEIF A/S Frisenborgvej
More informationDATA SHEET. Advanced Energy Meter, AEM 380 & AEM 305
DATA SHEET Advanced Energy Meter, AEM 380 & AEM 305 Easy installation MID-approved 5 optional communication interfaces Phase error detection Low power consumption Two tariffs Two-pulse output DEIF A/S
More informationPower Systems Communications Implementation of IEC61850 in a Substation Environment
Power Systems Communications Implementation of IEC61850 in a Substation Environment 26 October 2009 Reference VEE4700-01 Revision 0 Document Control Document ID: DOCUMENT1 Rev No Date Revision Details
More informationREL52002 Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: V, DI: V, RS-485
Characteristics Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: 48-230V, DI: 220-230V, RS-485 Main Range of product Product or component type Relay application Device short name [Us] rated supply voltage Type of
More informationDIGITAL RELAY OF PROTECTION AND AUTOMATION SERIES PC83 AND PC830
DIGITAL RELAY OF PROTECTION AND AUTOMATION SERIES PC83 AND PC830 PC83 and PC830 series devices are designed to perform the relay protection functions and 6-154 kv networks automation, have different functionality
More informationLevel 2, 3 and 4 Interconnection Application for Certified, Inverter Based Generating Facilities Not Greater than 2MW
Level 2, 3 and 4 Interconnection Application for Certified, Inverter Based Generating Facilities Not Greater than 2MW The Customer Generator applicant ("Applicant") hereby makes application to the T &
More informationOption X4 Additional Operator Panel AOP-2 Description of option Functional description
MULTI-LINE 2 DESCRIPTION OF OPTIONS Option X4 Additional Operator Panel AOP-2 Description of option Functional description DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615
More informationSubstation Automation Products. Transformer protection RET670/650 Relion 670 and 650 series
Substation Automation Products Transformer protection RET670/650 Relion 670 and 650 series For reliable protection and control of all types of power transformers and reactors The RET670/650 IEDs (Intelligent
More informationCatalog Edition 6 siemens.com/protection
Selection Guide for and Catalog Edition 6 siemens.com/protection Overview of Siemens Protection Catalogs Documentation Selection guide for and Catalog Catalog Catalog Accessoires Catalog Catalogs Manuals
More informationManual MFR Protection Relay - Version 3.xxxx
Manual 37140 MFR 11 - Protection Relay - Version 3.xxxx All Rights reserved. Subject to technical modifications. Version 37140 2003-03-26 37140_NEW_Manual MFR11.doc Woodward Governor Company Leonhard-Reglerbau
More information