Replacement Positioner SideControl Typ 1067
|
|
|
- Ralf Ferguson
- 6 years ago
- Views:
Transcription
1 Replacement Positioner SideControl Typ 1067 August 2009
2 Replacement Page 2
3 Improvements / 8793 sensor priciple rotary potentiometer 93 rotary potentiometer 180, increased accuracy display single-line LCD graphic 128x64 COG, backlight position indicator without mechanical material aluminium, plastic coated aluminium plastic coated, ss IP rating IP65 IP65/67 input signal process value 4 20mA 4 20mA, Pt100, frequency analog feedback, functionality 4 20mA (option), position 0 10V, 0/4 20mA, position, setpoint initiators for end position feedback without wire inductive switches (option) communication without Profibus DPV1 (option) process controller, tune function process controller / P-Tune process controller / advanced P-Tune circuit function single or double (option) single and double acting always air flow rate 14l/min / 35l/min single/double 150l N /min 70l/min single Ex certification without ATEX Zone 2/22 (in preparation) Page 3
4 remote mounting direce mounting Replacement SideControl type rd party actuators / NAMUR IEC xx Bürkert ELEMENT 8691/92/ / / /92/93 Remote Remote sensor Remote sensor 8691/92/93 Remote 8691/92/93 Remote Remote sensor Page 4
5 Changeover of customers until end of 2009 Page 5
6 81 mm 82 mm Replacement SideControl type 1067 dimensions Page 6
7 electrical connection pneumatic ports el. connection pn. ports el. connectors separated from the pn. ports better access and bigger cable gland standard 2xM20 for cable diameter up to 10mm M12 connectors as option M12 G1/8 pn. ports G1/4 compared to G1/8 at 1067 Better access for hose mounting More conventional port standard G1/4 integrated filter G1/4 Page 7
8 position sensor shaft new, more conventional sensor shaft dimensions interchangeability with competitors identical with SideControl 8635 locator and marking to support mounting Page 8
9 mounting 29 standard attachment in acc. to IEC and VDI/VDE 3845 (NAMUR) including Siemens standard and for wall mounting bracket 47 Siemens Sipart PS2 wall mounting bracket Ø50 Ø50 Page 9
10 adapter and mounting kits rotary actuator in acc. to VDI/VDE 3845 new adapter kit replaces for 1067; identical for 8635 New universal bracket ; suitable for all different actuator sizes linear actuator in acc. to IEC adapter kit for linear actuators; same as Page 10
11 electrical interfaces Positioner 8792 Prozessregler 8793 (in preparation) Page 11
12 differences 8792 / 8793 vs process controller used to be a additional software function of 1067, now is a own type SideControl 8793 For replacement please clarify application with your customer! analog feedback option can t be retrofitted, it t is a different ID.-no. Of the device much cheaper, but effects the stock keeping! for replacing 1067 in a existing application the specific conditions in regards to installation, control function and electrical signals have to be discussed with the customer to choose the replacing it.-no. just choosing replacement devices from the attached templates is not sufficient Page 12
13 decision - making process controller required? no yes 8792 positioner 8793 process controller new adapter new adapter process controller required? no yes 8792 positioner 8793 process controller new adapter new adapter Page 13
14 replacements standard program positioner 8793 process controller NMUR-IX-A-22-R NMUR-IX-A-22-R-22-A NMUR-IX-A-06-R-06-A NMUR-IX-A-22-R-22-R NMUR-IX-A-06-R NMUR-IX-A-22-R-22-A-0 MN11 binary outputs NMUR-IX-A-22-R MT35 analog output NMUR-IX-A-22-R-22-A-0 MT35 analog output NMUR-IX-A-22-R-22-R-0 MT35 analog output NMUR-IX-A-06-R-06-A-0 MT35 analog output (active items in 2009) Page 14
15 replacements customised program via E&C NMUR-IX-A-06-R-06-A-0 JF01+NA NMUR-IX-A-22-R-22-A-0 T NMUR-IX-A-22-R-22-A-0 T0DN NMUR-IX-A-06-R AF32+KN NMUR-IX-A-22-R-22-R-0 KP NMUR-IX-A-22-R AF32+KN NMUR-IX-A-22-R-22-A-0 T NMUR-IX-A-22-R KX08+T0C NMUR-IX-A-22-R T0DN NMUR-IX-A-22-R KX NMUR-IX-A-06-R-06-A-0 KP29+T00K NMUR-IX-A-06-R-06-R-0 T0CE NMUR-IX-A-22-R-22-A-0 KX NMUR-IX-A-09-R KX08+T0C NMUR-IX-A-22-R-22-A-0 T03G NMUR-IX-A-09-R KX NMUR-IX-A-22-R-22-R-0 AF32+KN NMUR-EX-A-22-R-22-A-0 T38+T01T+T0DN NMUR-IX-A-22-R-22-A-0 KP29+T00K NMUR-EX-A-22-R-22-A-0 MT38+T01T NMUR-IX-A-22-R-22-A-0 T051 (active items in 2009) Page 15
16 remote mounting direce mounting Dec Replacement SideControl type rd party actuators / NAMUR IEC xx Bürkert ELEMENT 8691/92/ / / /92/93 Remote Remote sensor Remote sensor 8691/92/93 Remote 8691/92/93 Remote Remote sensor Page 16
17 remote-version (in preparation for Dec. 2009) Changeover of customers until end of 1st quarter 2010 Remote sensor* Mounting bracket It.-No * Page 17 C-rail mounting kit It.-No * *: Dec. 2009
18 remote-version (in preparation for Dec. 2009) assembly kits Assembly bracket for wall mounting * DIN rail assembly kit * * * *: Dec Page 18
19 Thanks! Sebastian Kundel Segment Management Bürkert Fluid Control Systems Christian-Bürkert-Straße Ingelfingen/Germany Phone: +49 (0)79 40/10-0 Fax: +49 (0)79 40/
Digital electropneumatic Positioner SideControl
Digital electropneumatic Positioner SideControl Type 8791 BASIC can be combined with Compact and robust design Easy to start using tune function Dynamic positioning system with no air consumption in controlled
SideControl Positioner
SideControl Positioner Electropneumatic positioner for pneumatically actuated process valves II (1) 2 G EEx ia IIC T6 approval can be combined with... Type 2712 Globe valve Globe valve acc. to NAMUR/IEC
Digital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
Digital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact and robust design Easy to start using tune function Dynamic positioning system with no air consumption in controlled state Profibus
Digital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
Digital electropneumatic Process Controller
Digital electropneumatic Process Controller Type 879 can be combined with Compact and robust design Easy Start-up using tune function of the Positioner and Process controller Integrated diagnostic functions
Digital electropneumatic positioner SideControl
Digital electropneumatic positioner Type 879 can be combined with Compact and robust design Easy to start using tune function Integrated diagnostic functions for valve monitoring (optional) Dynamic positioning
Installation kits for hygienic process valves
Installation kits for hygienic process valves Positioner / Process controller and control head can be combined with Positioner / Process controller TopControl ELEMENT Type 8692, 8693, 8694 BASIC and 8696
Digital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integd mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up by automatic
PROFIBUS-PA Positioner Type 3785
PROFIBUS-PA Positioner Type 3785 Application Single-acting or double-acting PROFIBUS-PA positioner for attachment to pneumatic control valves. Rated travel from 7.5 to 120 mm Opening angle up to 120 Smart,
Digital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up Comprehensive
Digital Positioner 8049
Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes - 8 mm No steady-state air
Digital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Automatic teach function Contact-free position sensor Compact stainless steel design AS-Interface
Data Sheet T 8493 EN. Series 3793 TROVIS 3793 Electropneumatic Positioner with HART communication
Data Sheet T 8493 EN Series 3793 TROVIS 3793 Electropneumatic Positioner with HART communication Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating,
Series 3730 Type Electropneumatic Positioner
Series 3730 Type 3730-0 Electropneumatic Positioner Application Single-acting or double-acting positioner for attachment to pneumatic control valves Set point Travel 4 to 20 ma 5.3 to 200 mm The positioner
SRD991 Intelligent Positioner with HART, FoxCom, PROFIBUS-PA, FOUNDATION Fieldbus H1 or Without Communication
R V Data Sheet 12.07 DS EVE0105 -(en) SRD991 Intelligent Positioner with HART, FoxCom, PROFIBUS-PA, FOUNDATION Fieldbus H1 or Without Communication The intelligent positioner SRD991 is designed to operate
Series 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-0 Application Single-acting or double-acting positioner for attachment to pneumatic control valves Reference variable Travels 4 to 20 ma 5.3 to 200 mm
Digital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact stainless
Type 8792, Electropneumatic positioner and process controller. Operating Instructions
Electropneumatic positioner and process controller Operating Instructions We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous resérve de modification
Series 3793 TROVIS SAFE 3793 Electropneumatic Positioner with HART communication
Series 3793 TROVIS SAFE 3793 Electropneumatic Positioner with HART communication Application Single-acting or double-acting positioner for attachment to pneumatic on/off valves in safety-instrumented systems.
Sensor boxes SRBC. Festo core product range Covers 80% of your automation tasks
Sensor boxes SRBC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
Digital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact
VVP10-H HART VALVE POSITIONER. Great Performance, Compact, Robust in Severe Conditions* HART 7 Communication Protocol. Electronic Coil Technology
VVP10-H HART VALVE POSITIONER Great Performance, Compact, Robust in Severe Conditions* HART 7 Communication Protocol Electronic Coil Technology Non-Contact Position Sensor (Hall Sensor) 4-20 ma NAMUR NE
Data Sheet T 8394 EN. Series 3725 Type 3725 Electropneumatic Positioner
Data Sheet T 8394 EN Series 3725 Type 3725 Electropneumatic Positioner Application Single-acting positioner for attachment to pneumatic globe and rotary valves. Self-calibrating, automatic adaptation to
T EN TROVIS Electropneumatic Positioner
T 8484-1 EN TROVIS 3730-1 Electropneumatic Positioner Application Single-acting positioner for attachment to pneumatic globe and rotary valves. Self-calibrating, automatic adaptation to valve and actuator.
Series 3731 Electropneumatic Ex d Positioner Type with FOUNDATION TM Fieldbus communication
Series 3731 Electropneumatic Ex d Positioner Type 3731-5 with FOUNDATION TM Fieldbus communication Application Positioner for attachment to pneumatic control valves Travel: 3.6 to 200 mm Opening angle:
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
Digital electropneumatic Positioner for the integrated mounting on process
Digital electropneumatic Positioner for the integrated mounting on process control valves Compact, robust stainless Steel design Easy start-up by automatic X-Tune function Contact-free position sensor
Series 3730 Type Electropneumatic Positioner
Series 3730 Type 3730- Electropneumatic Positioner Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and
Series 3731 Type Electropneumatic Ex d Positioner with FOUNDATION TM fieldbus communication
Series 3731 Type 3731-5 Electropneumatic Ex d Positioner with FOUNDATION TM fieldbus communication Application Positioners for attachment to pneumatic control valves Rated travels from 3.6 to 200 mm Opening
Inductive sensor Dual sensors with extended temperature range NI4-DSU35TC-2Y1X2/S97
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex-zone 20 for temperatures up to -25 C SIL2 acc. to IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position
Pneumatic Control Unit for the integrated mounting on process valves
Pneumatic Control Unit for the integrated mounting on process valves Type 890 can be combined with Compact design Pilot valve with high air flow rate Internal control air channel Optical position indicator
Mounting set for electropneumatical positioner type APIS
Mounting set for electropneumatical positioner type APIS a) b) Fig.1. Positioner type APIS-1X0-... with mounting kit APIS-A0000-SS(SO) (positioner mounted on column type actuator P or R by Polna Ltd company).
26360, NAMUR. Technical data
66, 87 NAMUR /-, /- and / directional control valves Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G/ NAMUR-Interface For single and double operated actuators Manual
Series 3730 Electropneumatic Positioner Type with HART communication and pressure sensors
Series 3730 Electropneumatic Positioner Type 3730-6 with HART communication and pressure sensors Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating,
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
Inductive dual sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position of rotary actuators Mounting
26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.
66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual
SRD Z Intelligent Positioner stainless steel (316L)
Quick Guide 09.2014 QG EVE0105 C-(en) SRD991- - Z Intelligent Positioner stainless steel (316L) These instructions are to be used as a guide for quick start-up. Versions with LCD, Amplifier Spoolvalve
Technical description
Technical description Overview electropneumatic positioner EEx d electropneumatic positioner in flameproof casing in stainless steel casing The electropneumatic positioner is used to control the final
Inductive sensor For rotary actuators NI4-DSU35TC-2Y1X2
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Inductive sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Series 3731 Type Electropneumatic Ex d Positioner with HART communication
Series 3731 Type 3731-3 Electropneumatic Ex d Positioner with HART communication Application Single-acting or double-acting Ex d positioner for attachment to pneumatic control valves. Self-calibrating,
Control Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type can be combined with Compact stainless steel design Integrated analogue valve position registration (Teach function) Coloured illuminated
Inductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Data Sheet T EN
Data Sheet T 8384-4 EN Series 3730 Type 3730-4 Electropneumatic Positioner with PROFIBUS-PA communication Application Positioners for attachment to pneumatic control valves Valve travel from 3.6 to 300
Series 3730 Type Electropneumatic Positioner with PROFIBUS-PA communication
Series 3730 Type 3730-4 Electropneumatic Positioner with PROFIBUS-PA communication Application Positioners for attachment to pneumatic control valves Valve travel from 3.6 to 300 mm Opening angle 24 to
Series 3730 Type Electropneumatic Positioner
Series 3730 Type 3730-2 Electropneumatic Positioner Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and
Magnetic field sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M12 x 1 Chrome-plated brass Rated operating distance 90 mm with DMR31-15-5 magnet DC 2-wire, nom.
Data Sheet T EN
Data Sheet T 8384-3 EN Series 3730 Type 3730-3 Electropneumatic Positioner with HART communication Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating,
Sensor boxes SRBC. Festo core product range Covers 80% of your automation tasks
Sensor boxes SRBC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Electropneumatic Positioner for Linear and Rotary Actuators. Order No. C79000-G7476-C158-1
SIPART PS2 SIPART PS2 PA Electropneumatic Positioner for Linear and Rotary Actuators 6DR400x-xx 6DR410x-xx Manual Order No. C79000-G7476-C158-1 SIPART, SITRANS, SIMATIC are Siemens registered trademarks.
Electropneumatic Positioner Type and Type with HART communication
Electropneumatic Positioner Type 3730-2 and Type 3730-3 with HART communication Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-adjusting, automatic
TRANSMITTERS. HygroFlex & HygroClip-EX. Applications. Highlights
HygroFlex & HygroClip-EX HygroFlex series may be used together with the intrinsically safe HygroClip-EX probes. The relative humidity and temperature can be displayed and output as analog signals. Calculated
Inductive sensor For rotary actuators NI4-DSU35-2Y1X2-H1140
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Series 3730 Electropneumatic Positioner Type with PROFIBUS-PA communication
Series 3730 Electropneumatic Positioner Type 3730-4 with PROFIBUS-PA communication Application Positioner for attachment to pneumatic control valves Travels 3.6 to 200 mm Opening angle 24 to 100 Smart,
IHP24. Intelligent Hydraulic Positioner D HP- PL
IHP24 Intelligent Hydraulic Positioner D HP- PL- 0 0 3-01 IHP24 Intelligent Hydraulic Positioner Val Controls A/S Intelligent valve control based on the latest know-how concerning digital technology for
Operating instructions valve control box AS-i
THIS LEAFLET SHOULD BE KEPT IN A SAFE PLACE FOR REFERENCE Operating instructions valve control box AS-i 1 System description The Norgren Herion valve control box is used for controlling pneumatic swivel
3/2 Directional control valves Direct solenoid operated poppet valves Internal thread G 1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Direct solenoid operated poppet valves Internal thread G /, / NPT or flanged with NAMUR interface Main application: single operated actuators for plants TÜV-approval based
Type 8635 SIDE Control Positioner
Type 8635 SIDE Control Positioner Operating Instructions We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques. Bürkert
Type 8792, Quickstart. English Deutsch Français
Electropneumatic positioner and process controller Elektropneumatischer Positioner und Prozessregler Positionneur et régulateur de process électropneumatique Quickstart English Deutsch Français We reserve
Inductive angle sensor with analog output Ri360P1-DSU35TC-ELi-Exi
ATEX category II 2 G, Ex Zone 1 ATEX category II 2 D, Ex Zone 21 Rectangular, housing DSU35 Plastic, PP-GF30-VO Detection of angular range 0 to 360 P1-Ri-QR14 positioning element included in delivery Measuring
Operating pressure. N/en/en
660, 8007 NAMUR /, / & / spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple design
Inductive Angle Sensor With Analog Output RI360P1-DSU35TC-ELI-EXI
ATEX category II 2 G, Ex Zone 1 ATEX category II 2 D, Ex Zone 21 Rectangular, housing DSU35 Plastic, PP-GF30-VO Detecting angular positions of 0 to 360 P1-Ri-DSU35 positioning element included in delivery
HERION SERIES Indirect solenoid actuated spool valves
HERION SERIES Indirect solenoid actuated spool valves for single and double acting actuators with NAMUR interface /2, /2, /, NC/APB, G/, G/2 Valves for safety systems up to SIL (IEC 08) Crossover-free
Float Switches with Permanent Magnet For Vertical Installation Model RSM
Level Measurement Float Switches with Permanent Magnet For Vertical Installation Model RSM WIKA Data Sheet LM 30.01 Applications Level measurement for almost all liquid media Pump/level control and monitoring
Sensor boxes SRBE Key features and product range overview
Sensor boxes SRBE Sensor boxes SRBE Key features and product range overview Function Sensor boxes SRBE are used for electrical feedback and control of the position of process valves actuated using pneumatic
Type 8791 Positioner SideControl BASIC. Quickstart. English / Deutsch / Français
Positioner SideControl BASIC Electropneumatic positioner Elektropneumatischer Positioner Régulateur de position électropneumatique Quickstart English / Deutsch / Français We reserve the right to make technical
Series 3731 TROVIS SAFE Electropneumatic Ex d Positioner
Series 3731 TROVIS SAFE 3731-3 Electropneumatic Ex d Positioner with HART communication Application Single-acting or double-acting Ex d positioner for attachment to pneumatic on/off valves in safety-instrumented
Inductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
Data Sheet T 6493 EN. TROVIS 6400 Automation System TROVIS 6493 Compact Controller. For panel mounting (front frame 48 x 96 mm/1.89 x 3.
Data Sheet T 6493 EN TROVIS 6400 Automation System TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and
Electropneumatic positioners SIPART PS2
Electropneumatic positioners /2 Product overview /3 /4 Technical description /7 Technical Specifications /7 - all versions /8 - /10 - PA /12 - FF /14 - Option modules /1 Ordering data /1 -, PS2 PA, PS2
Sensor boxes SRBG Key features
Key features Function SRBG sensor boxes are the compact solution when it comes to electrical feedback signals and monitoring the position of process valves which are actuated with pneumatic quarter turn
Rotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
Magnetic Field Sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Inductive sensor BI5-EM18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Material pressure (bar) (Cv (US) kv x 1,2 Seat
00 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V Valves for safety systems up to SIL Solenoid valve also
Series 3730 Type Electropneumatic Positioner with PROFIBUS-PA communication
Series 3730 Type 3730-4 Electropneumatic Positioner with PROFIBUS-PA communication Application Positioners for attachment to pneumatic control valves Rated travels from 3.6 to 200 mm Opening angle 24 to
Switches 6/1. 6/4 Introduction. 6/5 5TE8 control switches. 6/7 5TE4 8 pushbuttons. 6/9 5TE8 On/Off switches. 6/11 5TE1 switch disconnectors
6/4 Introduction 6/5 5TE8 control switches 6/7 5TE4 8 pushbuttons 6/9 5TE8 On/Off switches 4 6/11 5TE1 switch disconnectors 6 6/1 Switch to manual? Wherever electrical systems need to be switched on or
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-EG08-Y1X-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
High-precision valve control using intelligent positioners. sipart
High-precision valve control using intelligent positioners sipart The SIPART PS2 electropneumatic positioner is number 1 in its field by a very wide margin. Our past experience gathered from 15 years in
Series 3730 Electropneumatic Positioner Type and Type with HART communication
Series 3730 Electropneumatic Positioner Type 3730-2 and Type 3730-3 with HART communication Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating,
Operating pressure. N/en/en
660, 8007 NAMUR /, / & / way spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple
Control head for hygienic process valves
for hygienic process valves Type can be combined with... Universal attachment for hygienic process valves Contactless position measurement system with 3 switching points (Teach-In function) Coloured status
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Series 3730 Type Electropneumatic Positioner with HART communication and pressure sensors
Series 3730 Type 3730-6 Electropneumatic Positioner with HART communication and pressure sensors Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating,
Electropneumatic positioners SIPART PS2
Electropneumatic positioners /2 Product overview /3 /3 Technical description /8 Technical specifications /8 - all versions /9 - /11 - PA /13 - FF /15 - Option modules /18 Ordering data /18 -, PS2 PA, PS2
Level gauges Series LS Level indicator, switch and transmitter for liquids
Level gauges Series LS Level indicator, switch and transmitter for liquids Simple construction Resistant under extreme temperature and pressure conditions No risk of leakage Measuring range: from 150 mm
System 6000 Electropneumatic Converters (proportional valves) Electronic Controllers Signal Converters
System 6000 Electropneumatic Converters (proportional valves) Electronic Controllers Signal Converters Edition November 2003 Information Sheet T 6000 EN Proportional valves e/p Converters Type 6 66 626
Inductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Temperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
VALVE ACCESSORIES & CONTROLS V100 POSITIONER VAC V100 SERIES POSITIONER SIMPLE DURABLE RELIABLE
VALVE ACCESSORIES & CONTROLS V100 POSITIONER VAC V100 SERIES POSITIONER SIMPLE DURABLE RELIABLE WWW.VACACCESSORIES.COM 205-678-0507 The V100 Positioner V100-EX The V100E (0/10V) Nema 4x I/P or V100-IS
Control head for decentralized automation of ELEMENT process valves
Control head for decentralized automation of ELEMENT process valves Type can be combined with Contact-free inductive valve position registration (Teach function) Coloured illuminated status display Integrated
Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
TZIDC Electro-Pneumatic Positioner. Compact, well-proven, and flexible. HART protocol. Wide operating temperature range C (-40...
Data Sheet Rev. H TZIDC Electro-Pneumatic Positioner Compact, well-proven, and flexible HART protocol For 4 20 ma two-wire technology Low operating cost Compact design Well-proven technology Robust and
Temperature module. 4 inputs for thermocouples
2 Bosch Rexroth AG Electric Drives and Controls Documentation 4 inputs, M12 Thermocouples (TC) M12 Technical data S67-AI4-UTH-M12 Local bus interface Designation System bus M12 connector, B-coded, 5-pin,
97105 NAMUR. Technical data. Ordering information and accessories See page 6 and 7
90 NAMUR /, / and / directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /, / NPT, G /, / NPT NAMUR-interface For single and double operated actuators
System Overview Fuel/air ratio control system VMS. Sensors and systems for combustion engineering.
System Overview Fuel/air ratio control system VMS Sensors and systems for combustion engineering www.lamtec.de LAMTEC Fuel/air ratio control system VMS Approvals. EC Type Examination Certificate (Module