Power Supply and Media

Transcription

1 Power Supply and Table of Contents Quick Selection Introduction Supply & General Power Supply and General Information Selection Criteria Quick Selection Guide Three-Phase Power Three-Phase Power Cordsets & Patchcords Trunk Cable Three-Phase Power Cordsets & Patchcords Drop Cable Three-Phase Power Tees & Reducer 4-Pole Three-Phase Power Receptacles, Male & Female Control Power Trunk and Drop Cables T-Ports Receptacles Shorting Plugs Three-Phase and Control Power Accessories Power Supply Catalog Number Index Note: The products in this chapter are all suitable for use with ArmorStart Distributed Motor Controllers. For product information, see the Industrial Controls catalog or

2 Power Supply and Selection Criteria General Quick Selection Introduction Supply & Description The power media offers both three-phase and control power cable systems of cordsets, patchcords, receptacles, tees, reducers and accessories, to be used with the ArmorStart Distributed Motor Controller. These cable system components allow quick connection of ArmorStart Distributed Motor Controllers, thereby reducing installation time. They provide for repeatable, reliable connection of the threephase and control power to the ArmorStart Distributed Motor Controller and motor, by providing a plug and play environment that also avoids system mis-wiring. Compared to the traditional conduit installations, with power media you profit and benefit from: Reduce commissioning time Plug and play design eliminates wiring errors Increased system design flexibility No special tools required Reduced labor costs Three-Phase Power The three-phase power media offers quick disconnect cables that provide a secure connection to the ArmorStart Distributed Motor Controller. The connectors can be straight or right angled and are physically keyed to prevent wiring mishaps. The cabling options include: Cordsets: Cable with integral male or female connector at one end and flying leads at the other Patchcords: Cable with integral connector at each end (one male, one female) Available in 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 10, 12, or 14 m lengths. The three-phase power tee, reducing tee, and reducer offers flexibility in system design. The receptacles provide a termination point at the panel and motor junction box. The female receptacles can be used for a panel mount connection. The male receptacles can be used for a quick disconnect at the motor junction box. Three-phase power media components are rated for motor branch circuits per UL Control Power The control power media offers a mini disconnect cables that provides a secure connection to the ArmorStart Distributed Motor Controller. The control power media components are a 6-pin/5-used configuration to prevent mis-wiring with network connectors. The connectors can be straight or right angled and are physically keyed to prevent wiring mishaps. The cabling options include: Cordsets: Cable with integral male or female connector at one end and flying leads at the other Available in 2, 5, or 10 m lengths. Patchcords: Cable with integral connector at each end (one male, one female) Available in 1, 2, 3, 5, or 10 m lengths. The control power tees offers flexibility in system design. The 6-pin/5-used T-port connects a single drop line to the trunk. Two types of tees are offered. The E-stop In tee is used to connect to the Bulletin 800F On-Machine E-Stop station using a control power media patchcord. The E-stop Out tee is used with cordset or patchcord to connect to the ArmorStart Distributed Motor Controller. The receptacles provide a termination point at the panel and ArmorStart Distributed Motor Controller. The female receptacles can be used for a panel mount connection. The male receptacles can be used for a quick disconnect at the ArmorStart Distributed Motor Controller with gland plate design. Power Supplies Bulletin 1607 power supplies provide: IP67 and NEC Class 2 ratings Vacuum encapsulation technology Quick connectors Smooth surface, suitable for washdown 11-2

3 RESET OFF Power Supply and Selection Criteria Diagram Suitable for ArmorStart Enclosure Bulletin 1492FB Branch Circuit Protective Device Bulletin 1606 Power Supply 1606-XLSDNET4 DeviceNet Power Supply PLC General Bulletin 280/281 ArmorStart Bulletin 283 ArmorStart Bulletin 284 ArmorStart Supply & Introduction Quick Selection Bulletin 800F Emergency Stop Push Button E-Stop Out E-Stop In 1. 3-Phase Power Patchcord (Trunk) Control Power Patchcord DeviceNet Patchcord (Drop) Phase Power T-port Control Power T-port E-Stop OUT ( 898N-653ES-NKF) DeviceNet Receptacle Phase Power Patchcord (Drop) Control Power Receptacle DeviceNet Terminator Phase Power Reducer DeviceNet Patchcord (Trunk) Phase Power Receptacle DeviceNet T-port Control Power T-port E-Stop IN ( 899N-653ST-NKF)

4 Power Supply and Quick Selection Guide Three-Phase Power General Quick Selection Introduction Description Three-Phase Power Trunk Cable Cordset - Cable with Integrel Female or Male connector on one end PatchCord - Cable with integrel female or male connector on each end Rated for Motor Branch Circuits - Meets UL 2237 for Industrial Machinery - 65ka High fault rating (SCCR) - Rated for wash down environments Straight or Right Angle Connectors 4-pin connector type Cable Rating: TC-ER/STOOW Multiple Standard lengths Three-Phase Power Drop Cable Cordset - Cable with Integrel Female or Male connector on one end PatchCord - Cable with integrel female or male connector on each end Rated for Motor Branch Circuits - Meets UL 2237 for Industrial Machinery - 65ka High fault rating (SCCR) - Rated for wash down environments Straight or Right Angle Connectors 4-pin connector type Cable Rating: TC- ER/STOOW Multiple Standard lengths Three-Phase Power Tees and Reducers Tee - Connects to a single drop line to trunk with M35 connectors Reducing Tee - Connects to a single M22 drop line to trunk M35 connector Reducer - Connects from M35 male connector to M22 female connector Rated for Motor Branch Circuits - Meets UL 2237 for Industrial Machinery - 65ka High fault rating (SCCR) - Rated for wash down environments Trunk Tee, Reducing Tee and Reducer 4-pin connector type Three-Phase Power Receptacles Female receptacles are a panel mount connector with flying leads Male receptacles are a motor juction box mounted connector with flying leads Rated for Motor Branch Circuits - Meets UL 2237 for Industrial Machinery - 65ka High fault rating (SCCR) - Rated for wash down environments Male and female configurations 4-pin connector type 1/2 in. NPT Available in 1 meter length Three-Phase Power Accessories Sealing Caps offered in versions to interface with female or male connectors Locking Clips clamshell design clips over three power phase connector to limit customer access Sealing Caps - Available in M35 and M22 styles Locking Clips - Designed for M35 and M22 connectors Rated Voltage 600V 600V 600V 600V Connector Body Dimensions Straight: 88.9 mm x 38.6 mm Right Angle: 75.5 mm x 74 mm Straight: 56. mm x 25.4 mm Right Angle: 44.9 mm x 40.4 mm Trunk Tee: 108 mm x 73.6 mm Reducing Tee: 108 mm x 65.5 mm Reducer: mm x 38.1 mm M22 Female: mm x mm M22 Male: mm x mm M35 Female: mm x mm M35 Male: mm x mm Product Selection See page 11-6 See page 11-8 See page See page See page Supply & Control Power Description Control Power Cordsets & Patchcords Cable with integral connector on either one or both ends Control Power T-ports Cable with single male connector attached to two female connectors 6-pin/5-used configuration 6-pin/5-used Male and female configuration Straight or right angle Compact design versions Color-coded E-stop in 16 AWG conductors, cable and E-stop out dual rated UL TC/Open configurations Wiring and STOOW Multiple Standard lengths Control Power Receptacles Panel mount connector with flying leads 6-pin/5-used configuration Male and female 16 AWG conductors 1/2 NPT mounting threads Multiple standard lengths Control Power Shorting Plugs Integral connector with leads shorted for specific application requirements 6-pin/5-used configuration Male Multiple versions color coded for simple identification Control Power Accessories Sealing caps, mounting nuts, and sealing washers Rugged durable construction Designed to mate with Control Power media Rated Voltage 600V 600V 600V 600V Connector Body Dimensions Straight: 56 x 25 mm (2.2 x 1 in.) Right Angle: 40 x 45 mm (1.6 x 1.8 in.) 72 x 64 mm (2.8 x 2.5 in.) 30 x 25 mm (1.2 x 1 in.) 56 x 25 mm (2.2 x 1 in.) Product Selection See page See page See page See page See page

5 Power Supply and Quick Selection Guide Power Supply Power Supply IP67 and NEC Class 2 ratings Vacuum encapsulation technology Dual output availability 150% power boost Quick connectors Smooth surface, suitable for washdown Output Power W Input Voltage / Primary Voltage V AC V DC Efficiency 82 89% Output Voltage / Secondary Voltage 24V DC Rated Output Current 2 8 A Operating C Temperature Range >60 C with derating (Tamb) Non-Operating Temperature Range C Certifications CE, UL 508 (UL Listed), UL (curus) Standards IEC/EN 60950, EN 60529, CE EN 60950; culus Listed, UL508, curus Recognized UL60950/CSA C22.2, No Product Selection See page Note: When used with ArmorConnect control media an intermediate junction box, or field installable connector, is required. General Quick Selection Introduction Supply & 11-5

6 Three Phase Power Cordsets and Patchcords Trunk Cables 25 A, TC-ER/STOOW PVC General Quick Selection Introduction Listed per UL 2237 for use in motor branch circuits per NFPA 79 One piece molded design, M35 connection Can be used as a drop cable for 25 A rated ArmorStart Distributed Motor Controller or when desired to minimize voltage drops on extended cable runs Specifications Certifications UL Listed File No. E318496, Guide PVVA Standards Compliance UL 2237 Mechanical Coupling Nut Black anodized aluminum Housing Black PVC Insert Black PVC Electrical Approximate Dimensions Dimensions are in millimeters (inches). Illustrations are not drawn to scale. Female straight Female 90 deg ( ) 88.9 (3.50) 38.6 (1.52) Cable Diameter in. +/ in. (19.68 mm +/- 0.5 mm) with four 10 AWG conductors Contacts Copper alloy with gold over nickel plating Cable Black PVC, dual rated UL TC/open wiring and STOOW Cable Rating 600V AC/DC Assembly Rating 25 A Short Circuit Current Rating (SCCR) Circuit Breaker: Suitable for use on a circuit capable of delivering not more than RMS Symmetrical Amperes at 480V AC maximum when protected by Bul. 140U-H frame circuit breaker, not rated more than 480V, 100 A and a maximum interrupting of RMS Symmetrical Amperes. Fusing: Suitable for use on a circuit capable of delivering not more than RMS Symmetrical Amperes at 600V AC maximum when protected by CC, J, and T class fuses. Environmental Enclosure Type Rating IP67, NEMA 4 & 6P; 1200 psi washdown UL Type TC 600V 90 C Dry 75 C Wet, Exposed Run (ER) or MTW Operating Temperature 600V 90 C or STOOW 105 C 600V - CSA STOOW 600V FT (2.94) Male straight 88.9 (3.50) Male 90 deg (1.52) ( ) 38.6 (1.52) 74.7 (2.94) 38.6 (1.52) Example of Cordset Example of Patchcord 11-6

7 Three Phase Power Cordsets and Patchcords Trunk Cables 25 A, TC-ER/STOOW PVC Pinout and Color Code Face View Pinout 4-Pin General Color Code Product Selection Cordsets Female 1 Black 2 Green/Yellow Extended PIN Male 3 Red 4 White Pin Count Assembly Rating Straight Female Right-Angle Female Straight Male Right-Angle Male 4-pin 600V, 25 A 280-PWRM35E-M 280-PWRM35F-M 280-PWRM35G-M 280-PWRM35H-M Patchcords Pin Count Assembly Rating Straight Female Straight Male Right-Angle Female Straight Male Straight Female Right-Angle Male Right-Angle Female Right-Angle Male 4-pin 600V, 25 A 280-PWRM35A-M 280-PWRM35B-M 280-PWRM35C-M 280-PWRM35D-M Stainless steel version may be ordered by adding S to the cat. no. (Example: 280S-PWRM35A-M*) Replace symbol with code from table below that represents length desired. Feet Meters Code Quick Selection Introduction 11-7

8 Three Phase Power Cordsets and Patchcords Drop Cables 10 A, TC-ER/STOOW PVC General Quick Selection Introduction Listed per UL 2237 for use in motor branch circuits per NFPA 79 One-piece molded design, M22 connection Can be used as a trunk cable for 10 A rated ArmorStart Distributed Motor Controller Can be used as a 10 A non-shielded motor cable Specifications Certifications UL Listed File No. E318496, Guide PVVA Standards Compliance UL 2237 Mechanical Coupling Nut Black anodized aluminum Housing Black PVC Insert Black PVC 0.43 in. +/ in. (10.9 mm +/- 0.5 mm) with four 16 AWG Cable Diameter conductors Electrical Contacts Brass with gold over nickel plating Cable Black PVC, dual rated UL TC/open wiring and STOOW Cable Rating 600V AC/DC Assembly Rating 10 A Fusing: Suitable for use on a circuit capable of delivering not more Short Circuit Current Rating than RMS Symmetrical Amperes at 600V AC maximum when (SCCR) protected by CC, J, and T class fuses, rated 40 A non-time delay or 20 A time delay. Environmental Enclosure Type Rating IP67, NEMA 4 & 6P; 1200 psi washdown UL Type TC 600V 90 C Dry 75 C Wet, Exposed Run (ER) or MTW Operating Temperature 600V 90 C or STOOW 105 C 600V - CSA STOOW 600V FT2 Approximate Dimensions Dimensions are in millimeters (inches). Illustrations are not drawn to scale. Female straight Female 90 deg (1.28) 25.4 (1.00) 56.1 (2.21) 40.4 (1.59) 25.4 (1.00) Male straight Male 90 deg (1.28) 25.4 (1.00) 59.4 (2.34) 43.2 (1.70) Example of Cordset 25.4 (1.00) Example of Patchcord 11-8

9 Three Phase Power Cordsets and Patchcords Drop Cables 10 A, TC-ER/STOOW PVC Pinout and Color Code Face View Pinout 4-Pin General Color Code Product Selection Cordsets Female 1 Black 2 White Male 3 Red 4 Green/Yellow Extended PIN Pin Count Assembly Rating Straight Female Right-Angle Female Straight Male Right-Angle Male 4-pin 600V, 10 A 280-PWRM22E-M 280-PWRM22F-M 280-PWRM22G-M 280-PWRM22H-M Patchcords Pin Count Assembly Rating Straight Female Straight Male Right-Angle Female Straight Male Straight Female Right-Angle Male Right-Angle Female Right-Angle Male 4-pin 600V, 10 A 280-PWRM22A-M 280-PWRM22B-M 280-PWRM22C-M 280-PWRM22D-M Stainless steel version may be ordered by adding S to the cat. no. (Example: 280S-PWRM22A-M*) Replace symbol with code from table below that represents length desired. Feet Meters Code Quick Selection Introduction 11-9

10 Three Phase Power Tees and Reducers 4-Pole General Quick Selection Introduction Listed per UL 2237 for use in motor branch circuits per NFPA 79 One-piece molded design M35 power tee M35 power tee with M22 reducing drop M35 to M22 straight reducer 4-pin T-port connects a single drop line to the trunk 4-pin configuration Specifications Approximate Dimensions Dimensions are in millimeters (inches). Illustrations are not drawn to scale. Reducer 38.1 (1.50) Power Tee #2 - GREEN/YELLOW #3 - RED #1 - BLACK KEYWAY (4.43) #4 - WHITE Power Tee - Reducing Drop #3 - RED #2 - WHITE #4 - GREEN/YELLOW KEYWAY #1 - BLACK 73.7 (2.90) Certifications UL Listed File No. E318496, Guide PVVA Standards Compliance UL 2237 Mechanical Coupling Nut Black anodized aluminum (trunk), black zinc die cast (drop) Housing Black PVC Insert Black PVC Electrical Contacts Copper alloy with gold over nickel plating Voltage 600V AC/DC 65.3 (2.57) 25.4 (1.00) Assembly Rating Short Circuit Current Rating (SCCR) M35 MALE #1 BLACK #1 #2 #2 #3 RED #3 #4 GREEN/YELLOW #4 WHITE WIRING DIAGRAM (4.25) 38.0 (1.50) (4.25) 38.0 (1.50) 19.0 (0.75) Trunk tee: 25 A Reducing tee: trunk 25 A / drop 15 A Reducer: 15 A Trunk Tee Fusing: Suitable for use on a circuit capable of delivering not more than RMS Symmetrical Amperes at 600V AC maximum when protected by CC, J, and T class fuses Circuit Breaker: Suitable for use on a circuit capable of delivering not more than RMS Symmetrical Amperes at 480V AC maximum when protected by Bul. 140U-H frame circuit breaker, not rated more than 480V, 100 A and a maximum interrupting of RMS Symmetrical Amperes. Reducing Tee & Reducer Fusing: Suitable for use on a circuit capable of delivering not more than RMS Symmetrical Amperes at 600V AC maximum when protected by CC, J, and T class fuses, rated 40 A non-time delay or 20 A time delay. Environmental Enclosure Type Rating IP67, NEMA 4 & 6P; 1200 psi washdown 19.0 (0.75) M22 FEMALE EXTENDED PIN 2 GREEN/YELLOW LEAD EXTENDED PIN 2 GREEN/YELLOW LEAD FEMALE FEMALE #3 RED #3 RED #1 BLACK #2 GREEN/YELLOW FEMALE #3 RED #1 BLACK #2 GREEN/YELLOW #4 WHITE #4 WHITE WIRING DIAGRAM #1 BLACK #4 GREEN/YELLOW FEMALE #3 RED #1 BLACK #2 GREEN/YELLOW #4 WHITE #2 WHITE WIRING DIAGRAM MALE MALE 11-10

11 Three Phase Power Tees and Reducers 4-Pole Pinout and Color Code Face View Pinout Assembly Rating Color Code M35 Connector 4-Pin M22 Connector General Trunk Tee: 25 A A Reducing Tee: Trunk 25 A / Drop 15 A B Female 1 Black 2 Green/Yellow Extended PIN Male 3 Red 4 White Quick Selection Female Male Female 1 Black 2 Green/Yellow Extended PIN 3 Red 4 White 1 Black 2 White 3 Red 4 Green/Yellow Extended PIN Introduction Reducer: Trunk 25 A / Drop 15 A Product Selection Tees and Reducing Adapters C 1 Black 2 Green/Yellow Extended PIN Male 3 Red 4 White 1 Black 2 White Female Description Assembly Rating Color Code M35, 3-Phase Power Tee, 4-pole 25 A A 280-T35 M35, 3-Phase Power Tee Reducing drop M22, 4-pole Trunk 25 A/Drop 15 A B 280-RT35 M35, 3-Phase Reducing Adapter, 4-pole 15 A C 280-RA35 Stainless steel version may be ordered by adding S to the cat. no. (Example: 280S-T35) 3 Red 4 Green/Yellow Extended PIN 11-11

12 Three Phase Power Receptacles Male and Female 16 & 10 AWG, 1/2 in. NPT Mount General Quick Selection Introduction Listed per UL 2237 for use in motor branch circuits per NFPA & 10 AWG conductors 4-pin configuration, M35 or M22 connection Female receptacles can be used for panel mount connection Male receptacles can be used for quick disconnect motor junction box 1/2 in.-14 NPT threads Specifications Approximate Dimensions Dimensions are in millimeters (inches). Illustrations are not drawn to scale (0.728) 280-M22F-M1 Certifications UL Listed File No. E318496, Guide PVVA Standards Compliance UL 2237 Mechanical Insert Black PVC Electrical Receptacle Shell Material (1.782) Black anodized aluminum (female) and zinc die cast, black E-coat (male) Copper alloy with gold over nickel plating (trunk), brass with gold over Contacts nickel plating (drop) Cable Rating 600V AC/DC Assembly Rating Short Circuit Current Rating (SCCR) 4-pin 10 AWG, 25 A 4-pin 16 AWG, 10 A 4-pin 10 AWG Fusing: Suitable for use on a circuit capable of delivering not more than RMS Symmetrical Amperes at 600V AC maximum when protected by CC, J, and T class fuses Circuit Breaker: Suitable for use on a circuit capable of delivering not more than RMS Symmetrical Amperes at 480V AC maximum when protected by Bul. 140U-H frame circuit breaker, not rated more than 480V, 100 A and a maximum interrupting of RMS Symmetrical Amperes. 4-pin 16 AWG Fusing: Suitable for use on a circuit capable of delivering not more than RMS Symmetrical Amperes at 600V AC maximum when protected by CC, J, and T class fuses, rated 40 A non-time delay or 20 A time delay. Environmental Enclosure Type Rating IP67, NEMA 4 & 6P; 1200 psi washdown 280-M35F-M (0.150) 7.32 (0.288) (0.628) (0.476) 1000 (39.37) /-2.54 (0.30 +/- 0.10) (2.032) (0.468) 6.35 (0.25) 1000 (39.37) 280-M22M-M1 280-M35M-M (1.104) 4.75 (0.187) 1000 (39.37) 6.35 (0.25) (0.468) 1000 (39.37) 11-12

13 Three Phase Power Receptacles Male and Female 16 & 10 AWG, 1/2 in. NPT Mount Pinout and Color Code Face View Pinout M35 Connector 4-Pin M22 Connector General Assembly Rating Color Code 16 AWG, 600V, 10 A A 10 AWG, 600V, 25 A B Product Selection Receptacles Female Male Female Male 1 Black 2 Green/Yellow Extended PIN Pin Count Assembly Rating Color Code 4-pin 3 Red 4 White Female 1 Black 2 White 3 Red 4 Green/Yellow Extended PIN 16 AWG, 600V, 10 A A 280-M22F-M1 280-M22M-M1 10 AWG, 600V, 25 A B 280-M35F-M1 280-M35M-M1 Stainless steel version may be ordered by adding S to the cat. no. (Example: 280S-M22F-M1) Male Quick Selection Introduction Accessories Mounting Nuts and Flat Seals Description Mounting nuts for 1/2 in.-14 NPT threaded receptacles Flat sealing washers for 1/2 in.-14 NPT threaded receptacles Pkg. Quantity A-U1NUT A-U1FSL

14 Control Power Trunk and Drop Cables 6-Pin/5-Used 16 AWG, STOOW PVC General Quick Selection Introduction Trunk and Drop Cables 6-pin/5-used configuration to prevent mis-wiring with network connectors One piece molded design 16 AWG exposed run (TC-ER) rated cable Red overmolds to indicate presence of E-stop wiring Specifications Mechanical Electrical Coupling Nut Black epoxy coated zinc Overmold Black Riteflex TPE Insert Yellow Riteflex TPE Contacts Brass/gold over palladium nickel Cable Grey PVC, 16 AWG, dual rated UL TC/open wiring and STOOW Cable Diameter 0.44 in. +/ in. (11.18 mm +/- 0.5 mm) UL Type TC 600V 90 C Dry 75 C Wet, Open Wiring or MTW 600V 90 Cable Rating C or STOOW 105 C 600V - CSA STOOW 600V FT2 Assembly Rating 600V, 10 A Environmental Enclosure Type Rating IP67, NEMA 6P, 1200 psi washdown Operating Temperature C ( F) Approximate Dimensions Dimensions are in millimeters (inches). Illustrations are not drawn to scale (1.0) dia (2.21) Female Straight 25.4 (1.0) dia. 7/8 in. 16 UN-2B 39.6 (1.56) Female 90 Deg (1.6) 32.5 (1.28) 59.4 (2.34) Extended Pin 3 Male Straight 32.5 (1.28) 25.4 (1.0) dia. 7/8 in. 16 UN-2B Male 90 Deg. Example of Cordset Example of Patchcord 11-14

15 Control Power Trunk and Drop Cables 6-Pin/5-Used 16 AWG, STOOW PVC Pinout and Color Code Face View Pinout 6-pin/5-used General Product Selection Cordsets Color Code Female 1 Red (+) 2 Black (-) 3 Green (GND) Male 4 Blank/Not Used 5 Blue (S1) 6 White (S2) Pin Count Assembly Rating Straight Female Right-Angle Female Straight Male Right-Angle Male 6-Pin/5-used 16 AWG 600V, 10 A 889N-F65GF- 889N-R65GF- 889N-M65GF- 889N-E65GF- Replace symbol with length in meters (2, 5, or 10 standard) Feet Meters Code Quick Selection Introduction Patchcords Pin Count Assembly Rating Straight Female Straight Male Right-Angle Female Straight Male Straight Female Right-Angle Male Right-Angle Female Right-Angle Male 6-Pin/5-used 16 AWG 600V, 10 A 889N-F65GFNM- 889N-R65GFNM- 889N-F65GFNE- 889N-R65GFNE- Replace symbol with length in meters (1, 2, 3, 5, or 10 standard) Feet Meters Code

16 Control Power T-Ports 6-Pin/5-Used General Quick Selection Introduction T-Ports 6-pin/5-used configuration to prevent mis-wiring with network connectors One piece molded design Durable compact design Product Selection T-Ports Specifications Mechanical Coupling Nut Black epoxy coated zinc Housing Riteflex TPE Insert Yellow Riteflex TPE Contacts Brass/gold over palladium nickel Electrical Assembly Rating 600V, 10 A Environmental Enclosure Type Rating IP67, NEMA 6P, 1200 psi washdown Operating Temperature C ( F) Approximate Dimensions Dimensions are in millimeters (inches). Illustrations are not drawn to scale. Pin 5 Pin 4 Pin (1.12) Pin 1 Pin 2 Blank Pin (0.17) Dia. 2 Places 71.8 (2.8) 9.8 (0.38) Dia. 2 Places Configuration Assembly Rating Overmold Color Wiring Diagram E-stop out 600V, 10 A Red E-stop in 600V, 10 A Black (0.57) 38 (1.49) 898N-653ES-NKF 898N-653ST-NKF Pinout and Color Code Face View Pinout 6-pin/5-used Color Code Female 1 Red 2 Black 3 Green Male 4 Blank/Not Used 5 Blue 6 White 11-16

17 Control Power Receptacles 6-Pin/5-Used Receptacles 6-pin/5-used configuration to prevent mis-wiring with network connectors 1/2 in.-14 NPT threads Product Selection Receptacles Specifications Mechanical Male: black epoxy coated zinc die cast Receptacle Shell Female: black anodized aluminum Insert Yellow PVC Contacts Brass/gold over palladium nickel Electrical Assembly Rating 600V, 10 A Environmental Enclosure Type Rating IP67, NEMA 6P, 1200 psi washdown Operating Temperature C ( F) Approximate Dimensions Dimensions are in millimeters (inches). Illustrations are not drawn to scale (1.11) 7/8 in. 16 UNS-2A thread 12.2 (0.48) 1/2 in. 14 NPT Thread 4.78 (0.18) 152.4/203.2 (6.0/8.0) 7/8 in. 16 UNS-2A thread 3.81 (0.15) 7.32 (0.28) (0.98) Dia (1.2) Pin Count Assembly Rating Female Male 6-Pin/5-used 16 AWG 600V, 10 A 888N-D65AF1-888N-M65AF1- Replace symbol with length in meters (0.3 or 1 standard) 11.1 (0.44) (7.0) 3.81 (0.15) 21.3 (0.84) Dia. Epoxy Filled 1/2 in. 14 NPT General Quick Selection Introduction Pinout and Color Code Face View Pinout 6-pin/5-used Color Code Female 1 Red (+) 2 Black (-) 3 Green (GND) Male 4 Blank/Not Used 5 Blue (S1) 6 White (S2) 11-17

18 Control Power Shorting Plugs 6-Pin/5-Used General Quick Selection Introduction Shorting Plugs 6-pin/5-used configuration to prevent mis-wiring with network connectors 1/2 in.-14 NPT threads Product Selection Shorting Plugs 25.4 (1.0) Dia (1.97) Configuration Assembly Rating Overmold Color Wiring Diagram E-stop out E-stop in Pinout and Color Code 600V, 10 A Specifications Mechanical Coupling Nut Black epoxy coated zinc Overmold Riteflex TPE Insert Yellow Riteflex TPE Contacts Brass/gold over palladium nickel Electrical Assembly Rating 600V, 10 A Environmental Enclosure Type Rating IP67, NEMA 6P, 1200 psi washdown Operating Temperature C ( F) Approximate Dimensions Dimensions are in millimeters (inches). Illustrations are not drawn to scale. Red Black N/C N/C Blank N/C N/C N/C N/C Blank Face View Pinout 6-pin/5-used 889A-M65SP61 889A-M65SP65 Color Code Female 1 Red (+) 2 Black (-) 3 Green (GND) Male 4 Blank/Not Used 5 Blue (S1) 6 White (S2) 11-18

19 Three Phase and Control Power Accessories Locking Clips, Sealing Caps, Mounting Nuts, and Flat Seals Accessories Product Selection Locking Clips Sealing Caps Specifications Mechanical Electrical Environmental Enclosure Type Rating Locking Clips Connector Style Material Thread Configuration Dimensions 7/8 in. -16 UN 2 A Threads Sealing Caps Material ABS/PC plastics Anodized aluminum Color Black Grey Non-current carrying, no ratings required No rating required Description Clam shell design clips over the three-phase power media drop connection, to limit customer access. Clam shell design clips over the three-phase power media trunk connection, to limit customer access. Pkg. Quantity 10 IP67, NEMA 4 & 6P; 1200 psi washdown Connector Style M22 Connector 280-MTRLC-M22 M35 Connector 280-MTRLC-M35 General Quick Selection Introduction Control Power (M22) External, male Internal, female 7/8 in. -16 UN 2 B Threads Gasket Gasket 1485A-C1 889A-NCAP Aluminum grey, anodized 3-Phase Power (M35) External, male Internal, female 1-3/8 in. -16 UN 2A Threads 1-3/8 in. -16 UN 2B Threads Gasket Gasket 889A-QMCAP 889A-QCAP 11-19

20 Power Supplies Bulletin 1607 Power Supplies Specifications General Quick Selection Introduction Supplies IP67 and NEC Class 2 ratings Vacuum encapsulation technology Quick connectors Smooth surface, suitable for washdown 1607-XT50D1A 1607-XT100D1A 1607-XT200D1A 1607-XT200D2A Output Power 48.0 W 91.2 W 192 W (288 W with bonus power) 91.2 W per output Input Voltage ( Hz) V AC, V DC V AC, V DC Operational Range V AC, V DC V AC, V DC Power Factor Hz >0.98 active Hold-up Time 50 ms Rated Input Current Inrush Current 1.0 A (115V AC), 0.5 A (230V AC) 2.0 A (115V AC), 1.0 A (230V AC) <25 A >88%, 120V AC Efficiency >89%, 230V AC Output Voltage 24V (+1%) 2.4 A (115V AC), 1.2 A (230V AC) >82%, 120V AC >85%, 230V AC 2.2 A (115V AC), 1.1 A (230V AC) Rated Output Current 2.0 A 3.8 A 8 A 3.8 A per output Reserve Power (typ. 4 s, 60 s recovery time) 12 A Ripple Voltage <240 mv PP bandwidth, 1 MHz Noise <480 mv PP bandwidth, 20 MHz Overcurrent Protection AC Power On LED Indication for Output 1 AC Power On LED Indication for Output 2 Operating Temperature Range (T amb ) Non-Operating Temperature Range Humidity MTBF Dimensions (W x H x D) Electronic current limited to A Electronic current limited to A C ( F) derate 2.5%/K, C ( F) 140 x 36 x 85 mm (5.51 x 1.42 x 3.35 in.) Yes Electronic current limited to A ( A after 4 s bonus power times out) C ( F) up to 100% with condensation > hours Electronic current limited to A Yes C ( F) derate 2%/K, C ( F) 187 x 74 x 122 mm (7.36 x 2.91 x 4.80 in.) Weight 750 g (1.65 lb) 3040 g (6.70 lb) Ingress Protection IP67, EN CE, UL 508 (UL Listed), UL (curus) standards = IEC/EN 60950, EN Certifications/Standards CE EN 60950; culus Listed, UL508, curus Recognized UL60950/CSA C22.2, No Special NEC Class 2 NEC Class 2 MTBF determined by Siemens norm SN at full load current and 40 C (104 F)

21 Power Supplies Bulletin 1607 Power Supplies Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes XT50D1A and 1607-XT100D1A 1607-XT200D1A Location of Keying Tab 130 (5.11) 5 Location of Keying Tab 225 (8.86) 6.6 General 74 (2.91) 85 (3.35) 122 (4.80) 140 (5.51) 35 (1.38) 245 (9.65) 100 (3.94) 74 (2.91) Quick Selection 22 (0.87) Location of Keying Tab 1607-XT200D2A 225 (8.86) (7.36) Introduction 122 (4.80) 100 (3.94) 245 (9.65) 74 (2.91) 22 (0.87) Pinouts Input Output 187 (7.36) Supplies Pin 1 NC 2 L 3 N Note: When used with ArmorConnect control media an intermediate junction box, or field installable connector, is required. Pin Product Selection Input Voltage Output Power [W] Output Voltage [V DC] Output Current [A] Inrush Current Single Output XT50D1A V AC, V DC (+1%) 3.8 <25 A 1607-XT100D1A 192 (288 with bonus power) XT200D1A Dual Output V AC, V DC 91.2 per output 24 (+1%) 3.8 <25 A 1607-XT200D2A 11-21

22 Power Supplies Bulletin 1607 Power Supplies General Quick Selection Introduction Accessories Cordsets Type No. of Pins Assembly Rating Straight Female Right Angle Female Straight Male Right Angle Male Input 3-Pin 600V, 13 A 889N-F3AFC- F 889N-R3AFC- F Output 4-Pin 600V, 10 A 889N-M4AFC- F 889N-E4AFC- F Replace symbol with 6 (6 ft), 12 (12 ft), or 20 (20 ft) for standard cable lengths. Patchcords Straight Female Straight Female Right Angle Female Right Angle Female Type No. of Pins Assembly Rating Straight Male Right Angle Male Straight Male Right Angle Male Input 3-Pin 600V, 13 A 889N-F3AFNM- 889N-F3AFNE- 889N-R3AFNM- 889N-R3AFNE- Output 4-Pin 600V, 10 A 889N-F4AFNM- 889N-F4AFNE- 889N-R4AFNM- 889N-R4AFNE- Replace symbol with 1 (1 m), 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Terminal Chambers Type No. of Pins Assembly Rating Straight Female Straight Male Input 3-Pin 250V, 12 A 871A-TS3-N1 Output 4-Pin 250V, 9 A 871A-TS4-NM1 T-Ports Type No. of Pins Assembly Rating Input 3-Pin 898N-33PB-N4KF 300V 8 A Output 4-Pin 898N-43PB-N4KF Panel Mount Receptacles Type No. of Pins Assembly Rating Thread Size Female Male Input 3-Pin 250V, 13 A 888N-D3AF1- F 1/2 in NPT Output 4-Pin 600V, 10 A 888N-M4AF1- F Description Mounting nuts for 1/2 inch-14 NPT threaded receptacles are available in bags of 10 pieces 889A-U1NUT-10 Replace symbol with 1 (1 ft) or 3 (3 ft) for standard cable lengths. Input/Output Devices Supplies Description Bulletin 1732 ArmorBlock and Bulletin 1732D/E ArmorWeldBlock I/O DeviceNet, Input Module, 16 Sink Inputs, DC Micro (M12) connector DeviceNet, Input Module, 16 Sink Inputs, DC Micro (Mini) connector DeviceNet, Output Module, 16 Source Outputs, DC Micro (M12) connector DeviceNet, Output Module, 16 Source Outputs, DC Micro (Mini) connector DeviceNet, Self-configuring Module, 16 point I/O, DC Micro (M12) connector DeviceNet, Self-configuring Module, 16 point I/O, DC Micro (Mini) connector DeviceNet I/O Module with Diagnostics DeviceNet, I/O Module with Diagnostics, 8 Sink Inputs (2 each on 4 connectors), 8 Source Outputs (2 each on 4 connectors), 1.4/8.0 A per Point/Module, DC Micro (M12) connector Bulletin 1738 ArmorPoint I/O ArmorPoint DeviceNet Adapter Module, Drop or Pass-through, with male and female M12 connectors ArmorPoint DeviceNet 24V DC Adapter Module with subnet expansion ArmorPoint DeviceNet Adapter Module, Drop or Pass-through, with male and female M18 connectors ArmorPoint DeviceNet Adapter Module, Drop only, with male M18 connector ArmorPoint Redundant ControlNet Adapter Module ArmorPoint Ethernet/IP 10/100 Mbps Adapter Module Bulletin 1792 ArmorBlock Maxum I/O ArmorBlock MaXum I/O Cable Base with Mini connectors, DeviceNet pass-through, and auxiliary power input connection Note: Review exact user and adapter power requirements for all digital products. Note: The On-Machine power supplies are designed so that user and adapter power are wired in parallel. Also, the following conditions exist: Total power (user plus adapter power) equals the On-Machine power supply output channel. Both user and adapter power are +24V DC. User and adapter power are common and not isolated. 1732D-IB16M12M D-IB16M12MINI 1732D-OB16M12M D-OB16M12MINI 1732D-16CFGM12M D-16CFGM12MN 1732D-8X8M12D 1732D-8X81212HD 1738-ADN ADNX 1738-ADN18P 1738-ADN ACNR 1738-AENT 1792D-CB18P 11-22