CIMON-PLC CIMON-HMI CIMON-TOUCH CIMON-Xpanel

Size: px

Start display at page:

Download "CIMON-PLC CIMON-HMI CIMON-TOUCH CIMON-Xpanel"

Hubert McLaughlin
6 years ago
Views:

2 CIMON-PLC CIMON-HMI CIMON-TOUCH CIMON-Xpanel

3 6 Total Solution For Industrial Automation

4 KDT Systems Produrct 7

8 CIMON-PLC Total Solution for Industrial Automation PLC (Programmable Logic Controller) sphere 8 Total Solution For Industrial Automation

9 10 Total Solution For Industrial Automation

10 CIMON PLC Produrct Line-up 11

11 CIMON-Xpanel Total Solution for Industrial Automation Industrial Xpanel Panel sphere 12 Total Solution For Industrial Automation

12 CIMON-TOUCH Total solution for industrial automation Industrial Touch Panel sphere 14 Total Solution For Industrial Automation

13 CIMON-HMI Total Solution for Industrial Automation Industrial Automatic Software sphere 16 Total Solution For Industrial Automation

14 CIMON Total solution for industrial automation Automation Systems sphere 18 Total Solution For Industrial Automation

15 CIMON RF-RTU Automation System 19

16 CIMON Total Solution Total for Solution Industrial for Industrial Automation Automation 22 Total Solution For Industrial Automation

18 Installation Guide You can refer to this guide to use CIMON-PPC

19 2. Interfaces Outline T12CS / T12CH / T15CS / T15CH P12CH / P15CH T15CX / T15CP P15CX / P15CP COM1: RS-232C This interface is used to connect the TOUCH/PPC to the host (PLC), via an RS-232C cable. When you use COM1 RS-232C port, you must not use COM1 RS-485/422 port. Connector Pin No Name Description 1 DCD Data Carrier Detect 2 RD Receive Data 3 TD Transmit Data 4 DTR Data Terminal Ready 5 SG Signal Ground 6 DSR Data Set Ready 7 RTS Request To Send 8 CTS Clear To Send 9 RI Ring Indicator Interfaces Total Solution For Industrial Automation 13

20 7. Specification TOUCH* T12CS T12CH T15CS T15CH T15CX T15CP PPC P12CH P15CH P15CX P15CP CPU VIA Eden ESP GHz RAM DDR-SDRAM 512MB PC3200 DDR400 Graphic UniChrome Pro IGP integrated in VIA CN400 VT8625 Display 12.1 TFT LCD CRT output (15P DSUB) 15 TFT LCD CRT output (15P DSUB) Touch Panel 5Wire Resistive 5Wire Resistive Storage CF 2GB HDD 40GB CF 2GB HDD 40GB PS/2 Keyboard / Mouse USB USB 2.0 x 4 Audio Port Audio Out x 1 Ethernet 10 BASE-T/100 BASE-TX x 1 10BaseT/100BaseTX x 2 Serial Port RS-232/422/485 x 1 ** RS-232/422/485 x 1 RS-232 x 1 RS-232 x 3 Parallel Port No Yes CD-ROM No Yes PCI Slot No Yes Power 100 ~ 240 VAC OS Windows XP Embedded Dimension 395 x x 250 x x 310 x 89 (WxHxD) X 106 Panel Cut (WxH) 319 x x x 297 The TOUCH include CIMON HMI for TOUCH. You can not use RS-232 and RS-422/485 connector of COM1 at a time. Specification Total Solution For Industrial Automation 23

22 16 CIMON-PLC 2 Specification Contents : Redundant System Temperature CPUs Module Special Modules Base Expansion Power Remote I/O Communication Training Kit Digital I/O Analog I/O 2.1 CIMON-PLC Description Specifications Item Operating Temperature Specification -10 ~ 65 Storage Temperature -25 ~ 80 Operating Humidity Storage Humidity Vibration 5 ~ 95%RH, Not condensed. 5 ~ 95%RH, Not condensed. In case of intermittent vibration Frequency Acceleration Amplitude Sweep 10 f< 57Hz mm 10 times in each 57 f < 150 Hz 9.8m/s2 {1G} - direction (X,Y,Z) In case of continuous vibration Frequency Acceleration Amplitude Sweep 10 f < 57Hz mm 10 times in each 57 f < 150 Hz 4.9m/s2 {1G} - direction (X,Y,Z) Shock - Max. Shock Acc.: 147 m/s2 {15G} - Time : 11 (3 times in X, Y, Z) - Pulse Wave : Half sine wave pulse Noise Impulse noise Communication modules : ± 1500V Except by communication Module : ± 2000 Electrostatic discharge Radiated electro-magnetic field Fast Transient Bust Noise Voltage: 4 kv(contact discharge) 27 ~ 500 MHz. 10 V/m Item Power Modul e Digital I/O (24V or more) Voltage 2KV 1KV 0.25KV Digital I/O(Less than 24V) Analog I/O Comm. interface Copyright 2006 BY KDT SYSTEMS, All rights reserved.

Specification 17 Environment Altitude No corrosive gas and no dust. 2,000m or less 2.2 Redundant System Redundancy of CPU module, power modules, bases, and communication modules is available.

23 Specification 17 Environment Altitude No corrosive gas and no dust. 2,000m or less 2.2 Redundant System Redundancy of CPU module, power modules, bases, and communication modules is available. CPU redundancy system is composed of separate bases for ideal redundancy structure. In case an error occurs in an active CPU module, a back-up module is automatically converted to active one for continuous operation. Furnishes a test button to check and maintain a system easily. Enables the configuration of network redundancy. Enables backup within the control scan delay time of 50ms and high-speed active conversion. Enables to construct redundancy network with a high-ranking computer. Supports Power redundancy. Contents : Basic Composition of Redundancy Base. System Configuration CM1-RPW (Redundant Power Monitoring Module) Bases for power redundancy Basic Composition of Redundancy Base : Copyright 2006 BY KDT SYSTEMS, All rights reserved.

18 CIMON-PLC Base Composition Unit Applicable Module CPU Base All base modules Power All power modules CPU CM1-XP1R Redundancy Interface CM1-RM01A Redundancy Comm.

24 18 CIMON-PLC Base Composition Unit Applicable Module CPU Base All base modules Power All power modules CPU CM1-XP1R Redundancy Interface CM1-RM01A Redundancy Comm. Module CM1-RC01A Redundancy Cable CM0-CBE Communication Module CM1-All comm. modules including CM1-EC01A Expansion Cable CM0-CBE Expansion Expansion 1 CM1-EP03A or CM1-EP02A Expansion 2 or More CM1-EP02A or CM1-EP01A Base / Power / I/O Modules of all kinds System Configuration : CM1-RPW (Redundant Power Monitoring Module) : Power status is visualized by LEDs. Power status signals are provided by digital output (DC 24V, Transistor, Sink) Copyright 2006 BY KDT SYSTEMS, All rights reserved.

Specification 19 LED status window A Line Status LEDs for Power "A" B Line Status LEDs for Power "B" OK ON when all powers are good 5 ON when main power output is good +15 ON when analog power (+15V)

..) A_OK B_OK A_NG B_NG ON when analog power (+15V) is good ON when analog power (-15V) is good ON when there is no internal power fail signal ON when service power (24V) is good Base for power

25 Specification 19 LED status window A Line Status LEDs for Power "A" B Line Status LEDs for Power "B" OK ON when all powers are good 5 ON when main power output is good +15 ON when analog power (+15V) is good -15 ON when analog power (-15V) is good PF ON when there is no internal power fail signal 24 ON when service power (24V) is good Status Output (4 points, 0.5A,...) A_OK B_OK A_NG B_NG ON when analog power (+15V) is good ON when analog power (-15V) is good ON when there is no internal power fail signal ON when service power (24V) is good Base for power redundancy : Three types of bases are provided for power redundancy Model No. of slots Size (mm) CM1-BS05R 5 slots * 108 CM1-BS08R 8 slots * 108 CM1-BS10R 10 slots * 108 Copyright 2006 BY KDT SYSTEMS, All rights reserved.

of 32000 Word variable(m-domain, K-domain, L-domain) Compact sized high efficient unit.

26 20 CIMON-PLC 2.3 CPU XP CPU : High speed processing(75 ns/step) by 32bit PLC processor Provides more than 400 instructions Abundant range of device limit provided : Maximum Input & Output of 8192 point, Data limit of Word variable(m-domain, K-domain, L-domain) Compact sized high efficient unit. Supports floating point instructions CP CPU : Self-dianosic system gives easy error manipulation Maximum of 16 base expansion A separate communication port mounted (CM1-CP4C:RS232C, CM1-CP4D:RS422/485) Supports variable types of programming Provides more than 300 instruction Item Specification CM1-XP1R / A CM1-XP2A CM1-XP3A Program Control Type Stored Program, Cyclic Operation, Time Driven Interrupt Program Language IL (Instruction List), LD (Ladder Diagram) Data Processing 32 Bits Instructions 55 basic instructions extended instructions Processing Speed 75 nsec / step Program Memory 128 Ksteps 64 Ksteps I/O Capacity Data Memory 1 MB Timer 4096 (10mS, 100mS Selectable : 0.01 ~ Sec) Counter 4096 Internal Flash Memory 2 MB Copyright 2006 BY KDT SYSTEMS, All rights reserved.

22 CIMON-PLC Minimization of Mounting Space : Even high-performance, the size is as minimized

CIMON-PLC WEIGHING 387 6 CIMON-PLC WEIGHING WG02A and WG04A modules provide the functionality for weighing system. These modules can be connected with various kinds of loadcell units.

29 CIMON-PLC WEIGHING CIMON-PLC WEIGHING WG02A and WG04A modules provide the functionality for weighing system. These modules can be connected with various kinds of loadcell units. WG04A can be connected with up to 4 independent loadcell signals at the same time. Weighing modules have following characteristics. : Max. 4 Channels of independent signal inputs. (WG04A) Supplies 5Vdc power to the connected loadcells for generating input signals. 24 bits A/D converter Provides 1 / 6,000,000 effective resolution. Provides 6 internal ready to use batch programs. Contents : Technical Specification Configure Front View Batch Program Wiring Instructions for Weighing Copyright 2006 BY KDT SYSTEMS, All rights reserved.

CIMON-PLC WEIGHING 389 RUN Z (Zero) S (Stable) Turn on after successful initialization when powered. If there is any error on hardware or configuration, this lamp will blink at every 0.2 second.

30 CIMON-PLC WEIGHING 389 RUN Z (Zero) S (Stable) Turn on after successful initialization when powered. If there is any error on hardware or configuration, this lamp will blink at every 0.2 second. Turned on when measured weight is within the range of zero. Otherwise this lamp will be turned off. Turned on when measured weight variation is within the range of stable. Otherwise this lamp will be turned off. 6.3 Wiring All 4 channels have the same pin-out that of above diagram. If 4-wire type loadcell is used, just leave the SEN+ and SEN- pin as opened. WG0nA module needs the external power supply. The power module should have the capacity of 2 Watts or more, and be separated with other power. Copyright 2006 BY KDT SYSTEMS, All rights reserved.

31 492 CIMON-PLC 8 CIMON-BLOCK PLC Block Type PLC (BP Series) : High performance CPU (200 nsec / step) CPU embedded PID function (max. 32 loops) High compatibility between CPU series : uses the same programming tool (CICON) Provides the programming tool (CICON) free. Contents : CPU Specification Block List 8.1 CPU Specification Item BP32M BP16M Power Input Out Expansion Option AC220V / DC24V DC24V Relay / TR SINK / TR SOURCE AD / DA / AD+DA / RTD / TC / IO (Max.3steps) Not-Expansible Standard I/O Input : 16 / Output : 16 Input : 8 / Output : 7 Program Control Type I/O Control Type Program Language Instruction Sequence 55 Instruction Processing Rate Application Stored Program, Cyclic operation, Time Driven Interrupt Indirect, Direct by Instructions IL (Instruction List), LD (Ladder Diagram) 289 Instruction 200 nsec / step (Sequence Instruction) Copyright 2006 BY KDT SYSTEMS, All rights reserved.

CIMON-BLOCK PLC 493 BP32M : 1. Abundant program capacity - 8,000 Step 2. Device range : Internal Relay : 4,096 Points Data Memory : 5,000 Words 3. Easy expansion Max. 3 block expansion BP16M : 1.

2 Block List Model Power Source Input Output Remarks CM2-BP32MDTA* CM2-BP32MDCA* CM2-BP32MDRA* CM2-BP32MDTD* CM2-BP32MDCD* CM2-BP32MDRD* AC 100-240V DC 24V 16 DC 24V 16 TR (Sink) TR (Source) RELAY

32 CIMON-BLOCK PLC 493 BP32M : 1. Abundant program capacity - 8,000 Step 2. Device range : Internal Relay : 4,096 Points Data Memory : 5,000 Words 3. Easy expansion Max. 3 block expansion BP16M : 1. Abundant program capacity - 4,000 Step 2. Device range : Assistant Relay : 4,000 Points Data Memory : 1,000 Words 3. Not-expansible 8.2 Block List Model Power Source Input Output Remarks CM2-BP32MDTA* CM2-BP32MDCA* CM2-BP32MDRA* CM2-BP32MDTD* CM2-BP32MDCD* CM2-BP32MDRD* AC V DC 24V 16 DC 24V 16 TR (Sink) TR (Source) RELAY *indicates R : RS232C S : RS422 / 485 E : Ethernet (10M) U : RS422 / 485 2CH CM2-BP16MDTA* CM2-BP16MDCA* CM2-BP16MDRA* CM2-BP16MDTD* CM2-BP16MDCD* CM2-BP16MDRD* AC V 8 DC 24V 7 TR (Sink) TR (Source) RELAY DC 24V - I/O Expansion Unit Copyright 2006 BY KDT SYSTEMS, All rights reserved.

PLC-CPU-CM3-SP Series

PLC-CPU-CM3-SP Series FEATURES Processor Speed: 200 ns/step 16DI/16DO 10K Steps of Program Memory Expansion Max: 11 Modules (Max 384 pts.) PID Control Two 20K pps High-Speed Counters Built in Two 100K pps Pulse Output Built