Symbol Description Value Unit Conditions. Minimum See Table 200 A. SMCJ100~SMCJ440 Operating Junction and Storage Temperature Range
|
|
- Gwen Cobb
- 6 years ago
- Views:
Transcription
1 Features Stand-off voltage from 5.0 to 440 volts Glass passivated junction 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR Low incremental surge resistance, excellent clamping capability SMC High temperature soldering guaranteed: 250 C/10 seconds at terminals This series is UL recognized under component index. File number E RoHS Compliant 1500W Surface Mount Transient Voltage Suppressor Maximum Ratings (T Ambient=25ºC unless noted otherwise) Symbol Description Value Unit Conditions VWM Stand-Off Voltage 5.0 to 440 V PPPM IFSM VF TJ,TSTG Peak Pulse Power Dissipation on 10/1000μs Waveform(1) (2) Peak Pulse on 10/1000μs Waveform(1) Minimum 1500 See Table Peak Forward Surge 8.3ms Single Half Sine-wave, Uni-directional only (2) 200 A Maximum Instantaneous 3.5 SMCJ5.0~SMCJ90 Forward Voltage for Unidirectional only 5.0 V SMCJ100~SMCJ440 Operating Junction and Storage Temperature Range W A -55 to 150 C Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25 C per Fig. 2 (2) Mounted on 0.31 x 0.31 (8.0 x 8.0mm) copper pads to each terminal (3) Mounted on minimum recommended pad layout TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 7
2 Mechanical Data Case: Epoxy: Terminals: Polarity: Mounting Position: Weight: JEDEC DO-214AB(SMC) molded plastic Meets UL 94V-0 flammability rating Solder plated, solderable per MIL-STD-750, Method 2026 Cathode indicated by color band except Bi-directional Any ounce, gram Electrical Characteristics (T Ambient =25ºC unless noted otherwise) P/N (note3) Device Marking Code Stand- Off Voltage Uni-Polar Bi-Polar Uni Bi V WM (V) Breakdown Voltage Test Min. V IT(mA) Clampi ng VC (V) Peak Pulse (A) (note1) Reverse V WM SMCJ5.0A SMCJ5.0CA GDE GDE ID (μa) (note2) SMCJ6.0A SMCJ6.0CA GDG GDG SMCJ6.5A SMCJ6.5CA GDK BDK SMCJ7.0A SMCJ7.0CA GDM GDM SMCJ7.5A SMCJ7.5CA GDP BDP SMCJ8.0A SMCJ8.0CA GDR BDR SMCJ8.5A SMCJ8.5CA GDT BDT SMCJ9.0A SMCJ9.0CA GDV BDV SMCJ10A SMCJ10CA GDX BDX SMCJ11A SMCJ11CA GDZ GDZ SMCJ12A SMCJ12CA GEE BEE SMCJ13A SMCJ13CA GEG GEG SMCJ14A SMCJ14CA GEK BEK SMCJ15A SMCJ15CA GEM BEM SMCJ16A SMCJ16CA GEP GEP SMCJ17A SMCJ17CA GER GER Page 2 of 7
3 P/N (note3) Device Marking Code Stand- Off Voltage Uni-Polar Bi-Polar Uni Bi V WM (V) Breakdown Test V BR IT(mA) Min. Clampi ng VC (V) Peak Pulse (A) (note1) Reverse V WM ID (μa) (note2) SMCJ18A SMCJ18CA GET BET SMCJ20A SMCJ20CA GEV BEV SMCJ22A SMCJ22CA GEX BEX SMCJ24A SMCJ24CA GEZ BEZ SMCJ26A SMCJ26CA GFE BFE SMCJ28A SMCJ28CA GFG BFG SMCJ30A SMCJ30CA GFK BFK SMCJ33A SMCJ33CA GFM BFM SMCJ36A SMCJ36CA GFP BFP SMCJ40A SMCJ40CA GFR BFR SMCJ43A SMCJ43CA GFT BFT SMCJ45A SMCJ45CA GFV GFV SMCJ48A SMCJ48CA GFX GFX SMCJ51A SMCJ51CA GFZ GFZ SMCJ54A SMCJ54CA GGE GGE SMCJ58A SMCJ58CA GGG GGG SMCJ60A SMCJ60CA GGK GGK SMCJ64A SMCJ64CA GGM GGM SMCJ70A SMCJ70CA GGP GGP SMCJ75A SMCJ75CA GGR GGR SMCJ78A SMCJ78CA GGT GGT SMCJ85A SMCJ85CA GGV GGV SMCJ90A SMCJ90CA GGX GGX SMCJ100A SMCJ100CA GGZ GGZ SMCJ110A SMCJ110CA GHE GHE SMCJ120A SMCJ120CA GHG GHG Page 3 of 7
4 P/N (note3) 1500W Surface Mount Transient Voltage Suppressor Device Marking Code Stand- Off Voltage Uni-Polar Bi-Polar Uni Bi V WM (V) Breakdown Voltage Test Min. V IT(mA) Clampi ng VC (V) Peak Pulse (A) (note1) Reverse V WM SMCJ130A SMCJ130CA GHK GHK SMCJ150A SMCJ150CA GHM GHM SMCJ160A SMCJ160CA GHP GHP SMCJ170A SMCJ170CA GHR GHR SMCJ180A SMCJ180CA GHT BHT ID (μa) (note2) SMCJ200A SMCJ200CA GHV BHV SMCJ220A SMCJ220CA GHX BHX SMCJ250A SMCJ250CA GHZ BHZ SMCJ300A SMCJ300CA GJE BJE SMCJ350A SMCJ350CA GJG BJG SMCJ400A SMCJ400CA GJK BJK SMCJ440A SMCJ440CA GJM BJM Note: 1. Surge current waveform per Fig. 3 and derate per Fig For Bi-directional types with VWM of 10 volts and less, the ID limit is doubled. 3. C suffix for Bidirectional use, A suffix for 5% tolerance. Typical Characteristics Curves Fig.1- Peak Pulse Power Rating Curve Fig.2- Pulse Derating Curve PPPM-Peak Pulse Power (KW) PPPM OR (%) Pulse Width td Ambient Temperature TA ( C) Page 4 of 7
5 -Peak Pulse Fig.3- Pulse Waveform IFSM-Peak Forward Surge Fig.4- Non-Repetitive Forward Surge Uni-directional only Time t (ms) Number of Cycles at 60Hz Fig.5- Junction Capacitance CJ-Capacitance (pf) Reverse Voltage (Volt) Page 5 of 7
6 Dimensions in inch (mm) Soldering Pad in inch (mm) SMC Page 6 of 7
7 How to contact us: US HEADQUARTERS WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800) TAITRON (800) (661) Fax: (800) TAITFAX (800) (661) TAITRON COMPONENTS MEXICO, S.A.DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P MEXICO Tel: Fax: TAITRON COMPONENTS INCORPORATED REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP BRAZIL Tel: Fax: TAITRON COMPONENTS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN AN ROAD, SUITE 1503, SHANGHAI, , CHINA Tel: Fax: Page 7 of 7
JEDEC DO-214AB(SMC) molded plastic. Solder plated, solderable per MIL-STD-750, Method 2026 Cathode indicated by color band except Bi-directional
3000W Surface Mount Transient Voltage Suppressor 3000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 220 volts Glass passivated junction Excellent clamping capability
More informationMolded plastic body over glass passivated junction Plated axial leads, solderable per MIL-STD-750, Method 2026
T6L Features Stand-off voltage from 5.0 to 250 volts Glass passivated junction 5000W Peak Pulse Power capability on 10/1000μs waveform repetition rate(duty cycle): 0.05% Fast response time: typically less
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 1500 W P D 6.5 W I FSM (uni-directional
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 1500 W P D 6.5 W I FSM (uni-directional
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AB (SMC) PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 1500 W P
More informationP6KE6.8A - 600CA. 600W Transient Voltage Suppressor. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) DO-15
Features Glass passivated chip junction 600W peak pulse power capability on 10/1000μs waveform repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR Min. 600W
More informationZ1SMA4736A Z1SMA4757A
1W Surface Mount Zener Diodes Features For surface mounted applications in order to optimize board space Built-in strain relief Glass passivated junction Low inductance High temperature soldering guaranteed:
More informationMETAL STRIP CHIP RESISTOR UlTRA LOW VALUE RM1206~RM2512
METAL STRIP CHIP RESISTOR UlTRA LOW VALUE RM1206~ Metal Strip Chip Resistor Ultra Low Value Features Ultra low resistance range from 0.5 to 20 m ohm High power rating up to 3 watt Low T.C.R down to ±50ppm/
More informationTransient Voltage Suppressor
Features: Glass Passivated Junction Low Incremental Surge Resistance, Excellent Clamping Capability Low Profile Package With Built-In Strain Relief for Surface Mounted Applications 600W Peak Pulse Power
More informationSURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt STAND-OFF VOLTAGE 5 to 220 Volt FEATURES Recongnized File # E210467 For surface mounted applications in order to optimize board space.
More information5KP_A. VRM : Volts PPK : 5000 Watts MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Features 5000W Peak Pulse Power Excellent clamping capability Low incremental surge resistance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) Typical IR less then 1μA above 10V
More informationSMF5.0-SMF170A SMF5.0-SMF170A
SMF5.0-SMF170A TRANSIENT VOLTAGE SUPPRESSOR Features: For surface mounted applications in order to optimize board space Low profile space Glass passivated chip Low inductance Excellent clamping capability
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationBZW04-5V8 thru BZW TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/0 μs waveform,
More informationSMAJ SERIES. Surface Mount Transient Voltage Suppressor Diodes
Surface Mount Transient Voltage Suppressor Diodes Features Low profile package Ideal for automated placement Glass passivated chip junction High forward surge capability Available in uni-directional 400
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W TVS Diode1.5KE Series
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Dimension Dim Millimeters Inches Min
More information1.5KE SERIES. Transient Voltage Suppressor Diodes
RoHS COMPLIANT Transient Voltage Suppressor Diodes Features Excellent clamping capability Low dynamic impedance Solder dip 275 C max. 7 s, per JESD 22-B106 Mechanical Data Package: DO-201AE Molding compound
More informationBAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
More informationTransient Voltage Suppressor
Features: Optimized for LAN Protection Applications Low Profile Package With Built-In Strain Relief For Surface Mounted Applications Low Incremental Surge Resistance, Excellent Clamping Capability 400W
More information500 W, Bidirectional Low Capacitance TVS Array
Available 500 W, Bidirectional Low Capacitance TVS Array DESCRIPTION This Transient Voltage Suppressor (TVS) is assembled in a QFN-143 package which has the same pinout and footprint as the SOT-143 package.
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd 20KP Series 20KW Transient Voltage Suppressor Rev.2.3 DESCRIPTION: The 20KP series of high current uni/bi-directional transient suppressors are designed for A.C. line protection
More informationSMAJ SERIES 400 Watts Suface Mount Transient Voltage Suppressor SMA/DO-214AC. RoHS. Features
Pb RoHS COMPLIANCE creat by art SMAJ SERIES 4 Watts Suface Mount Transient Voltage Suppressor SMA/DO-214AC Features UL Recognized File # E-326243 Low profile package Built-in strain relief Glass passivated
More informationMPLAD36KP14A MPLAD36KP400CA
Available Surface Mount 36,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 36 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More informationMPLAD18KP7.0A MPLAD18KP200CA
Available Surface Mount 18,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 18 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More information1 A Low Dropout Positive Voltage Regulator LD1117A. 1A Low Dropout Positive Voltage Regulator. General Description. Features. Applications SOT-223
1 A Low Dropout Positive Voltage Regulator 1A Low Dropout Positive Voltage Regulator General Description is a three terminal low dropout positive voltage regulator with a dropout of 1.15V at 1A output
More informationTransient Voltage Suppressors. AK3 Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Suppressors K3 Series Transient Suppressors - K3 Series Features Very low clamping voltage Ultra compact: less than one-tenth the size of traditional discrete solutions Sharp breakdown
More informationSMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional
More informationSurface Mount 18,000 W Transient Voltage Suppressor
MPLAD18KP7.0A MPLAD18KP200CA Datasheet Surface Mount 18,000 W Transient Voltage Suppressor Released June 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Features...
More informationSurface-Mount 36,000 W Transient Voltage Suppressor
Surface-Mount 36,000 W Transient Voltage Suppressor 1 Product Overview These high-power, 36 kw rated transient voltage suppressors in a surface-mount package are provided with design features to minimize
More informationSZAF5.1A~SZAF220A ZENER DIODE 1.5W
DESCRIPTION The are available in SMAF Package ORDERING INFORMATION Package Type Part Number SZAF5.1A SZAF36A SZAF5.6A SZAF39A SZAF6.2A SZAF43A SZAF6.8A SZAF47A SZAF7.5A SZAF51A SZAF8.2A SZAF56A SZAF9.1A
More informationSMF5.0A thru SMBJ190CA
Page No. : 1/9 Surface Mount Transient Voltage Suppressors Peak Pulse Power 200W Working Voltage 5.0 to 190V SMF5.0A thru SMF190CA Features Glass passivated chip Uni and Bidirectional unit Excellent clamping
More informationSilicon 5 Watt Zener Diodes
Compliant Silicon 5 Watt Zener Diodes DESCRIPTION The 1N5334Be3 through IN5388Be3 JEDEC registered series of axial-leaded 5.0 watt Zeners provides a voltage selection of 3.6 V to 200 V with different tolerances
More informationSMBJ SERIES Surface Mount Transient Voltage Suppressor Voltage Range 5.0 to 170 Volts 600 Watts Peak Power
SMBJ SERIES Surface Mount Transient Voltage Suppressor Voltage Range 5. to 17 Volts 6 Watts Peak Power Features SMB/DO-214AA For surface mounted application Low profile package Built-in strain relief Glass
More informationSurface Mount Silicon Zener Diodes
FEATURES CREAT BY ART - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance - Typical IR less than 0.5μA above 11V - ESD Rating of
More informationPAM2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications from the damaging effects of Electrostatic Discharge (ESD)
More informationMCC SMA2EZ5.1D5 THRU SMA2EZ75D5. Features. 2 W Glass Passivated Junction Silicon Zener Diode Volts.
Features Mechanical Data TERMINALS : Solder plated, solderable per MIL-STD-7, method 6 POLARITY : Color band denotes positive end (cathode) omponents 76 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/Rohs
More informationBZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
More informationPESD2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications such as DeviceNet Bus lines from the damaging effects of Electrostatic
More informationSM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
More informationCZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free Features - Glass passivated chip - Low leakage - Built-in strain relief - Low inductance - High peak reverse power
More informationSMBJ5.0A thru SMBJ188A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V P PPM 600 W I FSM (uni-directional only) A T J max. 150 C DEVICES FOR BI-DIRECTION
More informationMCC 2EZ5.1D5 THRU 2EZ75D5. Features Glass Passivation Junction. 2 W Glass Passivated Junction Silicon Zener Diode 5.
omponents 76 Marilla Street Chatsworth!"# $%!"# EZ.D THRU EZ7D Features Glass Passivation Junction Lead Free Finish/RoHS Compliant (Note C) ("P"Suffix designates Compliant. See ordering information) Excellent
More informationCP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
More informationACZRC5340B-G Thru. ACZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device
CZRC5340B-G Thru. CZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device Features - Glass passivated chip. - Low leakage. - Built-in strain relief. - Low inductance. - High peak reverse power
More informationSingle-Phase 6.0A Glass Passivated Bridge Rectifier
0 Single-Phase 6.0A Glass Passivated Bridge Rectifier 0 Features D3K Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd Rev.4.0 FEATURES 620 Watts peak pulse power per line (tp=8/20µs) Protects two line pairs Low clamping voltage Low operating voltage RoHS compliant MAIN APPLICATIONS SOP-8
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd AK Series 6A Transient Voltage Suppressor Rev.2 DESCRIPTION: The AK6 series of high current bi-directional transient suppressors are designed for A.C. line protection and
More information1N47- Series DO-41. Mechanical Data. Page <1> 18/07/08 V1.1
Features: Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Typical I R less than 5.0µA above 11V. High temperature soldering guaranteed: 260 C/10 seconds at terminals
More informationPLR ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SC-89 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance (0.7pF Max. I/O to I/O) steering diode and TVS array combo. This device provides circuit protection for interfaces
More informationPLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
More informationESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
More informationGBLC03 - GBLC24C. Ethernet 10/100/1000 Base T SMART Phones Handheld - Wireless Systems USB Interface
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 400 W, 300 W I FSM 40 A
More informationPLR0506LP BOTTOM VIEW ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-8 PACKAGE FEATURES APPLICATIONS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect computing applications such as gigabit Ethernet,
More informationPLR0521E ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION DFN-2 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance transient voltage suppressor array, designed to protect computing applications from the damaging effects of Electrostatic Discharge
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
More informationPSM WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR PIN CONFIGURATION
600 WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR Description The is an asymmetrical transient voltage suppressor (TVS) array, designed specifically for RS-485 applications. This device provides protection
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd SRV05 4B TVS Diode Array Rev.1.0 FEATURES: Protects four I/O lines Low clamping voltage Low operating voltage Low capacitance RoHS compliant MAIN APPLICATIONS SOT23-6L
More informationPSR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The is an ultra low capacitance (typically 1.5pF), transient voltage/steering diode suppressor array. This device provides circuit protection
More informationPSOT03LC - PSOT36LC 500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationBi-directional ESD Protection Diode
Bi-directional ESD Protection Diode FEATURES Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) Meet IEC61-4-4 (EFT) rating. 4A (5/5ns) Protects one Bi-directional I/O line Moisture sensitivity level: level
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SDT23CXXL02 series are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage
More informationGBLC03 - GBLC24C. Ethernet 10/100/1000 Base T SMART Phones Handheld - Wireless Systems USB Interface
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationSRV05-4A TVS Arrays. Mechanical Characteristics. Applications
SRV05-4A TVS Arrays Description The SRV05-4A is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect sensitive semiconductor components from electrical overstress when interfaced
More informationSRV05-4. ultra low capacitance steering diode/tvs array. Description. sot-23-6 package. applications
ultra low capacitance steering diode/tvs array Description The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationTESDC24V Taiwan Semiconductor
Bi-directional TVS Diode Array FEATURES - Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) 6 - Meet IEC61-4-4 (EFT) rating. A (5/5ns) 3 - Protects one Bi-directional I/O line 5 - Working Voltage : 24V
More informationSRV25-4LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More information2M6.8Z - 2M200Z Taiwan Semiconductor
2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC
More informationSMF Transient Voltage Suppressor Diode Series
SMF Transient Voltage Suppressor Diode Series General Information The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationPLR0524P ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect computing applications such as gigabit Ethernet,
More information500 mw AXIAL-LEADED ZENER DIODES
Available on commercial versions 0 mw AXIAL-LEADED ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The series of 0.5 watt Zener voltage regulators provides a selection from 1.8
More informationSLVU WATT ULTRA LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT ULTRA LOW CAPACITANCE TVS ARRAY Description The is a low voltage, low leakage current and ultra low capacitance TVS device designed for EOS and ESD protection of low voltage circuits commonly
More informationMCC. Revision: /06/09 1N5338B THRU 1N5369B
Features Zener Voltage From 5.V to 5V Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 For Available Tolerances See Note Marking : Cathode band and type number Maximum Ratings:
More informationBi-directional ESD Protection Diode
// Bidirectional ESD Protection Diode FEATURES Meet IEC642 (ESD) ±k (air), ±8k (contact) Designed for mounting on small surface Protects one Bidirectional I/O line Moisture sensitivity level 1 Working
More information500 mw SURFACE MOUNT ZENER DIODES
Available on commercial versions 0 mw SURFACE MOUNT ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The 1N4678UR-1 thru 1N4717UR-1 series of 0.5 watt glass surface mount DO-213AA
More informationUM5304EEBF. Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EEBF SC89-6/SOT563/SOT666 UM5304EECF TSOP-6/SOT23-6 General Description UM5304EEXF are surge rated diode arrays designed
More informationSMBJ SERIES SMB SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS
LITE-ON SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS STAND-OFF VOLTAGE - 5.0 to 350 Volts POWER DISSIPATION - 600 WATTS FEATURES For surface mounted applications Reliable
More informationULL0402FC05C. Description. Mechanical characteristics PIN CONFIGURATION. SMART Phones Portable Electronics SMART Cards
LOW CAPACITANCE unbumped flip chip tvs array Description The ULLC0402FC05C Flip Chip employs advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The series of is designed to protect power port and the chip Vbus interfaces. It has been specifically designed to protect sensitive
More informationEBLC05C - EBLC12C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The EBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.
More informationPAM04DF ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect automotive applications. The is available in the
More informationSRV05-4 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationUM5204EEBF. Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EEBF SC89-6/SOT563/SOT666 UM5204EECF TSOP-6/SOT23-6 General Description are surge rated diode arrays designed to protect
More informationFeatures. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
More informationSF5x Series DO-201AD. Page <1> 26/07/08 V1.1. Dimensions : Inches (Millimetres)
Features: High efficiency, low V F. High current capability. High reliability. High surge current capability. Low power loss. For use in low voltage, high frequency inventor, free wheeling, and polarity
More informationSMDA05C-7 THRU SMDA24C-7
Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge
More informationMaximun Ratings and Electrical Characteristics at 25 C
SOD123W Voltage Power Dissipation 9.1 to 220 V 1 W FEATURE Low profile package Ideal for automated placement Low leakage current High surge current and zener capability Low differential resistance Low
More informationTransient Voltage Suppressor, Unidirectional
Transient Voltage Suppressor, Unidirectional FEATURES: Equivalent Industry Standard Part Numbers Designed For MIL-STD-704 28 Volt Power Supply Protection Can be supplied with JAN/JANTX parts This series
More informationCM and SB Series Single Phase Bridge Rectifiers
Features: Electrically isolated metal case for maximum heat dissipation. Metal case with an electrically isolated mylar. Rating to 0 Volts PRV. Ampere surge capability. High efficiency. Mounting: Through
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationApplications. Keypads Side Keys,LCD Displays IEC (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV
1-Line Low Capacitance Bi-directional TVS Diode Description The is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage,
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
More informationPLR0514LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance, 4-channel steering diode/tvs array. This device is designed to protect computing applications such as Gigabit
More informationRSB6.8S LOW CAPACITANCE TVS ARRAY DESCRIPTION SC-79 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY DESCRIPTION The is a low capacitance, transient voltage suppressor designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics.
More informationPMURA2J / MURB2J / MUR260K
SUPERFAST RECOVERY RECTIFIERS Voltage 600 V Current 2 A Features Superfast recovery times-epitaxial construction Low forward voltage, high current capability Hermetically sealed. Low leakage High surge
More informationUESD6V8L1F. Low Capacitance Single Line ESD Protection Diode Array UESD6V8L1F DFN General Description
Low Capacitance Single Line ESD Protection Diode Array DFN2 1.0 0.6 General Description The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell
More information