CI-100 and CI-170 Parts Catalog. Document

Transcription

1 CI-100 and CI-170 Parts Catalog

2 Industrial Dynamics Company, Ltd. Copyright All rights reserved. No part of this publication may be reproduced or used in any form or by any means (graphic, electronic, or mechanical including photocopying, recording, taping, or information storage and retrieval system) without written permission of Industrial Dynamics Company, Ltd. filtec and Industrial Dynamics are registered trademarks of Industrial Dynamics Company, Ltd. All other trademarks are the property of their respective owners. Contact Information Corporate Headquarters 3100 Fujita Street, Torrance, California U.S.A. Telephone:(310) FAX: (310) Internet: Mailing Address P.O. Box 2945, Torrance, California U.S.A. Shipping Address 3100 Fujita Street, Torrance, California U.S.A. Customer Service (800)

3 Table of Contents Preface vii Introduction vii Topics That This Guide Covers vii Audience of This Guide vii Conventions That Appear in This Guide viii 1. Ordering CI-100 or CI-170 Parts Section Page 1.1 Placing an Order for Parts Illustrated Parts Catalog Documentation Feedback Feedback-1 Help Us Improve Feedback-1 Ways to Submit Feedback Feedback-1 Documentation Feedback Form Feedback-2 Table of Contents iii

4 iv CI-100 and CI-170 Parts Catalog

5 List of Figures Preface vii 1. Ordering CI-100 or CI-170 Parts Documentation Feedback Feedback-1 List of Figures v

6 vi CI-100 and CI-170 Parts Catalog

7 Preface Introduction The CI-100 or CI-170 documentation provides technicians and service personnel with complete information about the CI-100 or CI-170. Other documents that describe the CI-100 or CI-170 that you can consult include: CI-100/CI-170 Operation Guide tells line operators how to use and maintain the CI-100 or CI-170. CI-100 and CI-170 Installation and Service Drawing Pack contains system drawings and schematics that describe how to install the CI-100 or CI-170, associated equipment, and configure the software that you use with the CI-100 or CI-170. Topics That This Guide Covers Servotec II Parts Catalog contains a pictorial parts catalog of spare and service parts that you might need to maintain and service your CI-100 or CI-170. Audience of This Guide This guide is intended for use by Industrial Dynamics/filtec customers who need to replace CI-100 or CI-170 parts. Preface vii

8 Conventions That Appear in This Guide Use the following chart to learn about the typographic conventions that appear in this guide. This typeface or symbol... Indicates... Example... abcd1234 A link to another document or page in the current document, which, when you click on it, displays the other document or the other page. CI-100 and CI-170 Parts Catalog Important: Important information that you might find helpful or useful and best practice suggestions. Important: Send oddly shaped (non-round) and plastic containers to Industrial Dynamics Company (Industrial Dynamics/filtec) for testing and evaluation before you use them with the CI-100 or CI-170. Caution: That there is a potential for damage to the equipment. Depending on the particular damage that can result, harm to a person can also occur. Caution: To ensure your complete safety, run all power cables through conduit. Warning: That there is a potential for harm to an individual. As harm can be mild or severe, strictly observe the information that is provided. Warning: Before you attempt to install the CI-100 or CI-170, turn off power and disconnect all electrical power cables from the CI-100 or CI-170. Failure to turn off power and disconnect all cables can result in serious injury or death from electrocution. abcd1234 abcd1234 Emphasis, a definition of a new concept, or a variable for which you provide actual text. Text, including titles, menus, commands, and other information that you see or type on a screen. Before you attempt to install the CI-100 or CI-170, turn off power and disconnect all electrical power cables from the CI-100 or CI-170. A text field is a set of alphanumeric characters in a product code that do not change. +x or -x Press Key 5 until the CI-100 or CI-170 displays Maximum Container Diameter on the screen. viii CI-100 and CI-170 Parts Catalog

9 This typeface or symbol... Indicates... Example... abcd1234 A best practice to follow, a note, an example, a range of values that you can type in a field on a screen, and a document to which to refer. Best Practice: Note: Example: Range: See Also: abcd1234 A file name or directory path. The system encrypts and internally stores the encrypted password that you provide in the configuration file file.cfg. Preface ix

10 x CI-100 and CI-170 Parts Catalog

11 1. Ordering CI-100 or CI-170 Parts This chapter tells you how to place orders to obtain new parts, describes types of spare parts kits, lists recommended spare parts, and shows you parts that you can order. Ordering CI-100 or CI-170 Parts 1-1

12 1.1 Placing an Order for Parts Telephone Number to Call to Order Parts The telephone number that you call to order parts for your CI-100 or CI-170 depends on the location from which call. Use the chart below to determine the telephone number to call. If you live... Then call... Outside of North America In North America toll free Important: You can also send a fax to to place your order Information That You Need Before You Place Your Order Use this table to determine and record the information that you need to gather before you place your order. Serial number of your CI-100 or CI-170: The part number of the part that you want is The description of the part is... The quantity that you want is CI-100 and CI-170 Parts Catalog

13 1.2 Illustrated Parts Catalog Diagram Use the following illustrated parts catalog to identify the parts that you want to order. Note: An asterisk (*) indicates that the part is a critical spare, which means that you need the part to operate your CI-100 or CI-170. Quantity Part No. Description Wearstrip for push plate for the long stroke case ram, part number * Pad for push plate for the long stroke case ram, part number Retro reflector used with the leading and trailing flap sensors * Scintillation tube detector voltage divider, 12 pin - standard Optical polarized retro sensor for reject tracker (includes mounting hardware) * Autoshutter power card assembly (CI-100) * Dual detector box assembly Beacon driver card * Single detection box assembly (use with only) * Power supply card, single tier * Solid state power supply assembly (CI-100) * Panel touch plate deluxe Scintillation Tube detector voltage divider, 14 pin - high sensitivity Air cylinder for autoshutter (CI-100), 2 inch stroke Three way solenoid valve for vortex cooling * 7 inch cathode ray tube display monitor assembly Power supply assembly with shield 2-tier Scintillation tube detector 14-pin high sensitivity I/R PNP sensors (side flaps, leading and trailing flaps, high flaps, and reference flap) Ordering CI-100 or CI-170 Parts 1-3

14 Quantity Part No. Description Video interface DC assembly, not shown x* CPU control card (x represents an actual version, which you can find on your machine order) Ultrasonic proximity unslit flap sensor assembly Radiation shield shutter (autoshutter) lead plate (CI-100) Cable for encoder, quick connect: = 7 feet = 13 feet = 20 feet = 50 feet = 100 feet Air purge with dual filter, 45-8 PSI X-ray on/off switch (CI-170) X-ray modified pilot light assembly (CI-170) * X-ray generator and generator power supply card assembly (CI-170) * X-ray power supply, 24 V (CI-170) Photo electric sensor, emitter and receiver (trigger) Scintillation tube detector Beacon pilot light LED cluster 12 VDC, green LED cluster 12 VDC, red * Red plastic lens * Green plastic lens Autoshutter magnet activated sensor, mates with part number (CI-100) Autoshutter activated magnet (CI-100) Solenoid autoshutter (CI-100) Beacon assembly Relay AC Relay, DC output, ODC Sensor for high flap detection, ultrasonic Relay, reed (PLC) Circuit breaker, fuse type, 1/4 Amp Relay, 24 VDC input 1-4 CI-100 and CI-170 Parts Catalog

15 Quantity Part No. Description pulse high resolution encoder assembly (order cable part number separately) * Fiber optic amplifier assembly * 500 pulse high resolution encoder assembly with quick connect cable * Fiber optic cable * Inspection trigger, glass fiber optic * Socket, 12 pin tube High sensitivity detector assembly Sensor assembly, external trigger AC interlock switch * Indicates that the part is a critical spare Ordering CI-100 or CI-170 Parts 1-5

16 Item Part No. Description Scintillation tube detector voltage divider, 12 pin, standard Scintillation tube detector voltage divider, 14 pin, high sensitivity Power supply assembly with shield 2-tier x Control card CPU 10 MHz assembly (x represents an actual version, which you can find on your machine order) X-ray generator and generator power supply card assembly (CI-170) Scintillation tube detector, 12-pin, standard Scintillation tube detector, 14-pin, high sensitivity 1-6 CI-100 and CI-170 Parts Catalog

17 Item Part No. Description Dual detector box assembly Solid state power supply assembly (CI-100) Power supply box assembly (CI-170) Solenoid, spring return (CI-100) Autoshutter power card assembly (CI-100) Air cylinder for autoshutter (CI-100), 2 inch stroke Three way solenoid valve for vortex cooling Ordering CI-100 or CI-170 Parts 1-7

18 Item Part No. Description Amber strobe beacon, 12 VDC Beacon driver card assembly Beacon pilot light LED cluster 12 VDC, green LED cluster 12 VDC, red Green plastic lens Red plastic lens 1-8 CI-100 and CI-170 Parts Catalog

19 Item Part No. Description Relay, AC outlet (PLC) Relay, DC outlet (PLC) Relay, reed (PLC) Relay, 24 VDC input X-ray on/off switch assembly Actuator, magnetic Circuit breaker, fuse type, 1/4 Amp Sensor, magnet activated Ordering CI-100 or CI-170 Parts 1-9

20 Item Part No. Description inch cathode ray tube display monitor assembly Optical polarized retro sensor for reject tracker, including mounting hardware Touch pad panel Touch pad video interface card assembly Power supply card, single tier 1-10 CI-100 and CI-170 Parts Catalog

21 Item Part No. Description Sensor for high flap detection, ultrasonic Flap detection infrared sensor assembly High flap detector reflector Pad for push plate for the long stroke case ram, part number Wearstrip for push plate for the long stroke case ram, part number Encoder, high resolution Ordering CI-100 or CI-170 Parts 1-11

22 Item Part No. Description Detector box assembly (CI-170) Cable for encoder, quick connect X-ray modified pilot light assembly (CI-170) Air purge with dual filter, 45-8 psi Radiation shield shutter (autoshutter) lead plate Photo-electric sensor, emitter and receiver (trigger) Ultrasonic proximity unslit flap sensor assembly 1-12 CI-100 and CI-170 Parts Catalog

23 Item Part No. Description Fiber optic amplifier assembly pulse high resolution encoder assembly with quick connect cable Fiber optic cable Inspection trigger, glass fiber optic Socket, 12 pin tube Sensor assembly, external trigger AC interlock switch High sensitivity detector assembly Ordering CI-100 or CI-170 Parts 1-13

24 1-14 CI-100 and CI-170 Parts Catalog

25 Documentation Feedback Help Us Improve Please help us provide you with better documentation. Submit comments, suggestions, and corrections to the Technical Publications Department at Industrial Dynamics/filtec. Ways to Submit Feedback You can submit your comments, suggestions, and corrections in any of the following ways: Electronic mail Fax Mail Use the Documentation Feedback Form Use the Documentation Feedback Form Thank you! Technical Publications Department at Industrial Dynamics/filtec Documentation Feedback Feedback-1

26 Documentation Feedback Form Fax to Your full name Mail to Industrial Dynamics/filtec Technical Publications Department 3100 Fujita Street Torrance, CA Your telephone Your address Your business name and address Page numbers about which you are submitting feedback Provide your comment, suggestion, or correction below and fax or mail this completed form to the fax number of address above. Feedback-2 CI-100 and CI-170 Parts Catalog