ic-mu EVAL MU2M 3-TRACK NONIUS EVALUATION KIT DESCRIPTION
|
|
- Sydney Reeves
- 5 years ago
- Views:
Transcription
1 Rev A, Page /7 ORDERING INFORMATION Type Order Designation Description Options Evaluation Kit ic-mu EVAL MUM Evaluation kit includes board MUM populated with two ic-mu DFN6-5x5 and an two EEPROMs (see Figure 6) Evaluation oard ic-mu EVAL MUD Evaluation board suitable to eval kit MUM and MUM, the board is needed to connect MUM to a PC via MU adapter Magnetic Tapes MUL N Magnetic tape -track nonius, total length 700mm MU5L 60-0N Magnetic tape -track nonius, total length 650mm PC Adapter ic-m icsy MU High Performance iss-to-pc Adapter (US) adapter is necessary for calibration of ic-mu OARD MUM TERMINAL DESCRIPTION Signal output connector (pin configuration suitable to connector of board MUD) Figure : Component side Copyright 0 ic-haus
2 Rev A, Page /7 Figure : Evaluation kit ic-mu EVAL MUM
3 Rev A, Page /7 CONNECTOR AND TERMINAL PINOUT : Signal output PIN Name Function SCL_U EEPROM interface U, clock SDA_U EEPROM interface U, data VPA Analog supply voltage GND Ground 5 P0_U Port MU, Pin 0: Digital I/O, 6 P_U Port MU, Pin : Digital I/O, 7 P_U Port MU, Pin : Digital I/O, 8 P_U Port MU, Pin : Digital I/O, 9 PA_U Port A MU, Pin : Digital I/O, 0 PA_U Port A MU, Pin : Digital I/O, PA_U Port A MU, Pin : Digital I/O, PA0_U Port A MU, Pin 0: Digital I/O, GND Ground VPD Digital supply voltage 5 MTD_U Multiturn interface MU, data 6 MTC_U Multiturn interface MU, clock 7 SCL_U EEPROM interface MU, clock 8 SDA_U EEPROM interface MU, data 9 MTD_U Multiturn interface MU, data 0 MTC_U Multiturn interface MU, clock
4 Rev A, Page /7 CIRCUIT DESCRIPTION The ic-mu evaluation board MUM features a 0-pin connector. A ribbon cable could be connected to the evaluation board MUD (see Figure 6). A -track nonius system linear or rotary (radial magnetize) can be evaluate using the board MUM. C6 00nF VPD VDD U-S GND VPA VPD C C C C 00nF 00nF 00nF 00nF U ic-mu VPD VPD MASTER TRACK VPD VPD PA0 P0 5 P0 PA 0 PA SERIAL R R 9 PA INTERFACE k5 k5 ANALOG/ P 6 P DIGITAL P 7 P 0 OUTPUT P 8 P R R 9 k5 k5 U ic-mu PA0 PA 0 PA SERIAL 9 PA INTERFACE MASTER TRACK ANALOG/ DIGITAL OUTPUT P0 5 5 P 6 6 P 7 7 P 8 8 NONIUS TRACK NONIUS TRACK 7 SCL MTC 6 6 SCL MTC 6 0 IC MULTITURN IC MULTITURN 8 SDA INTERFACE INTERFACE MTD 5 5 SDA INTERFACE INTERFACE MTD 5 9 Hall sensors Hall sensors VNA VND SU VNA VND SU EPAD EPAD VPD U-A U-A VDD 5 5 C5 WP WP 00nF U-S SDA SDA GND SCL SCL XX_WP XX_WP Figure : Circuit diagram MUM
5 Rev A, Page 5/7 ASSEMLY PART LISTS Device Value (typical) Comment C - C6 00 nf (060) Capacitors X7R 6V R - R.5 kω (060) I C pull-up resistors % U ic-mu DFN6-5x5 ic-mu Device (ST, segment/master track) U ic-mu DFN6-5x5 ic-mu Device (MT, nonius/master track) U (SOT) EEPROM k connected to U U (SOT) EEPROM k connected to U 0 pol. Connector WSL x0 90 deg Table : oard MUM MU Port Figure : oard MUM - top side Figure 5: oard MUM - bottom side
6 Rev A, Page 6/7 APPLICATION EXAMPLE Figure 6: ic-mu eval kit parts Required eval kit parts:. ic-mu EVAL MUM. ic-mu EVAL MUD. MUL N. ic-m icsy MU Figure 7: MUM with magnetic tape MUL N
7 Rev A, Page 7/7 RELATED PRODUCTS AND DOCUMENTATION Item Description Documentation and Information ic-mu DFN6-5x5 Magnetic off-axis absolute position encoder MUL N MU5L 60-0N ic-mu EVAL MUD Magnetic tape, -track nonius Magnetic tape, -track nonius Evaluation board suitable for MUM ic-m icsy MU High Performance iss-to-pc Adapter (US) REVISION HISTORY Rev Notes Pages affected A Initial version ic-haus expressly reserves the right to change its products and/or specifications. An info letter gives details as to any amendments and additions made to the relevant current specifications on our internet website this letter is generated automatically and shall be sent to registered users by . Copying even as an excerpt is only permitted with ic-haus approval in writing and precise reference to source. ic-haus does not warrant the accuracy, completeness or timeliness of the specification and does not assume liability for any errors or omissions in these materials. The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of the product. ic-haus conveys no patent, copyright, mask work right or other trade mark right to this product. ic-haus assumes no liability for any patent and/or other trade mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
ic-mh EVAL MH1D EVALUATION BOARD DESCRIPTION
Rev A5, Page 1/10 ORDERING INFORMATION Type Order Designation Description Options Evaluation Board ic-mh EVAL MH1D ic-mh Evaluation Board ready to operate, accessible through GUI via PC adapter Software
More informationic-mu EVAL MU1C MOTOR FEEDBACK EVALUATION KIT DESCRIPTION
Rev B4, Page 1/10 ORDERING INFORMATION Type Order Designation Description Options Evaluation kit ic-mu EVAL MU1C Evaluation kit includes PCB module MU1C, magnetic code disc MU2S 30-32N, cable signal output
More informationic-mh EVAL MH1D EVALUATION BOARD DESCRIPTION
Rev A4, Page 1/9 ORDERING INFORMATION Type Order Designation Description Options Evaluation Board ic-mh EVAL MH1D ic-mh Evaluation Board ready to operate, accessible through GUI via PC adapter Software
More informationic-msb EVAL MSB1D EVALUATION BOARD DESCRIPTION
Rev A2, Page 1/7 ORDERING INFORMATION Type Order Designation Description and Options Evaluation Board ic-msb EVAL MSB1D ic-msb Evaluation Board ready to operate, accessible through GUI via PC adapter Software
More informationMB4U BiSS, SSI, PC-USB 2.0 ADAPTER
MB4U Rev B1, Page 1/5 FEATURES APPLICATIONS BiSS / SSI application development BiSS / SSI debugging Flexible interface configuration Encoder calibration Portable applications USB 2.0 high speed PC interface
More informationic-px Series EVAL PXM EncoderBlue EVALUATION KIT DESCRIPTION
Rev A1, Page 1/5 ORDERING INFORMATION The evaluation kit includes a scanner module PX1M assembled with ic-pxnnnn. Please refer to Page 4 for an overview of kit parts. EncoderBlue is a trademark of ic-haus
More informationic-tw11 EVAL TW11_1C EVALUATION BOARD DESCRIPTION
ic-tw11 EVAL TW11_1C ar y n i im prel Rev A2, Page 1/7 ORDERING INFORMATION Type Order Designation Evaluation Board ic-tw11 EVAL TW11_1C Description Options ic-tw11 Evaluation Board Ready-to-operate, includes
More informationic-mn AN5 APPLICATION NOTE: CIRCUIT EXAMPLES
i-mn N5 PPLITION NOTE: IRUIT EXMPLES Rev 5, Page 1/6 OPTIL ROTRY ENOER 6 isc i-pnxxxx PS_N N_N PS_M N_M PS_S N_S V RLE 47 P_N NS_N P_M NS_M P_S NS_S LE i-tl85 VREF PS_N NS_N P_N N_N PS_M NS_M P_M N_M PS_S
More informationic-pv EVAL PV1D EVALUATION BOARD DESCRIPTION
Rev A1, Page 1/10 ORDERING INFORMATION Type Order Designation Description Options Evaluation Board ic-pv EVAL PV1D ic-pv Evaluation Board Ready-to-operate, supplied with magnet, accessible by GUI using
More informationic-nq, ic-nqc EVAL NQ6D EVALUATION BOARD DESCRIPTION
ic-nq, ic-nqc EVL NQD EVLUTION ORD DESCRIPTION Rev, Page /0 ORDERING INFORMTION Type Order Designation Description Options Evaluation oard ic-nq EVL NQD ic-nq Evaluation oard ic-nqc EVL NQD ic-nqc Evaluation
More informationic-mhm EVAL MHM1D EVALUATION BOARD DESCRIPTION
Rev A3, Page 1/12 ORDERING INFORMATION Type Order Designation Description Evaluation board ic-mhm EVAL MHM1D ic-mhm evaluation board Ready-to-operate, includes adapter MHM3M, accessible by GUI using PC
More informationic-ht EVAL HT1D EVALUATION BOARD DESCRIPTION
Rev A2, Page 1/12 ORDERING INFORMATION Type Order Designation Description Options Evaluation Board ic-ht EVAL HT1D ic-ht Evaluation Board ready to operate, accessible through GUI via USB including USB
More informationic-hf EVAL HF1D EVALUATION BOARD DESCRIPTION
Rev B1, Page 1/8 ORDERING INFORMATION Type Order Designation Description Options Evaluation Board ic-hf EVAL HF1D ic-hf Evaluation Board ready to operate: Encoder Link Sequence and power down available
More informationic-htp EVAL HTP1D EVALUATION BOARD DESCRIPTION
Rev A1, Page 1/11 ORDERING INFORMATION Type Order Designation Description Options Evaluation Board ic-htp EVAL HTP1D ic-htp Evaluation Board ready to operate, accessible through GUI via USB including USB
More informationic-mcw EVAL MCW1D EVALUATION KIT DESCRIPTION
Rev A2, Page 1/11 ORDERING INFORMATION This evaluation kit includes the evaluation board MCW1D (assembled with ic-mcw QFN24), and an USB (A-B) cable for PCs. Type Description Options Order Designation
More informationic-nq EVAL NQ1D EVALUATION BOARD DESCRIPTION
Rev B4, Page 1/6 ORDERING INFORMATION Type Order Designation Description/Options ic-nq Demo EVAL NQ1D ic-nq Evaluation Board with BiSS PC Adapter ready-to-operate, incl. adapter MB3A equipped with ic-mb3
More informationMB3U, MB3U-I2C BiSS TO PC-USB ADAPTER
Rev A5, Page /7 ORDERNG NFORMATON Type Order Designation Options PC Adpater ic-mb3 icsy MB3U BiSS to PC-USB Adapter ic-mb3 icsy MB3U-C BiSS and C to PC-USB Adapter Software BiSS GU GU software for Windows
More informationic-mhl200 EVAL MH2D EVALUATION BOARD DESCRIPTION
ar y n i im prel ic-mhl00 EVL MH EVLUTION BOR ESCRIPTION Rev, Page / ORERING INFORMTION Type Order esignation escription Options Evaluation Boards ic-mhl00 EVL MH Evaluation board for MHLM pcb connection
More informationic-tl6 BLCC Point Source LED
Rev A1, Page 1/6 FEATURES High brightness Ultra Red LED Glass cover High temperature range -40 to 125 C SMD 1206 LED Package APPLICATIONS Illumination for high resolution optical encoder, PSDs and optical
More informationMB3D ic-mb3 BiSS MASTER DEMO-BOARD
Release B1, Page 1/6 ORDERING INFORMATION Type Ordering Information Descriptions/Options ic-mb3 Demo Board MB3D-S MB3D-P Demo board for connecting BiSS/SSI sensors to the LPT port on a PC (serial configuration)
More informationic-pvl AN2 MULTITURN CONFIGURATION GUIDE
Rev A3, Page 1/21 INTRODUCTORY DESCRIPTION ic-pvl is an ultra low power magnetic encoder used for linear, off-axis and on-axis multiturn position sensing. Together with a compatible ic-haus singleturn
More informationAPPNOTE NUMBER AN1139 PI3WVR13412 DP1.4/HDMI2.0 Mux/Demux Application Guidelines Justin Lee
APPNOTE NUMBER AN1139 PI3WVR13412 DP1.4/HDMI2.0 Mux/Demux Application Guidelines Justin Lee 1. Introduction PI3WVR13412 is video switch that supports wide input voltage range. It can be employed in DP1.3/4
More informationic-hd7 QUAD DIFFERENTIAL LINE DRIVER
Rev A6, Page 1/8 FEATURES Complementary short-circuit-proof push-pull driver stages for RS422 and 24 V applications up to 2 MHz Pin-compatible to 26LS31, xx7272 Integrated line adaptation for high signal
More informationEval Kit Manual. DN[Document ID] AS6200. Adapter Board AS6200-WL_EK_AB. ams Eval Kit Manual Page 1
Eval Kit Manual DN[Document ID] AS6200 Adapter Board AS6200-WL_EK_AB ams Eval Kit Manual Page 1 Content Guide 1 Introduction... 3 1.1 Kit Content... 3 2 Getting Started... 4 3 Hardware Description... 4
More informationic-mh16 Evaluation Software Software Description
Rev A1, Page 1/14 DESCRIPTION ic-haus ic-mh16 evaluation software is developed for PCs running the Windows operating system. The evaluation software is developed in LabVIEW and requires a one-time installation
More informationAPPNOTE NUMBER AN1138 PI3WVR13612 DP1.4/HDMI2.0 Mux/Demux Application Guidelines Justin Lee
APPNOTE NUMBER AN1138 PI3WVR13612 DP1.4/HDMI2.0 Mux/Demux Application Guidelines Justin Lee 1. Introduction PI3WVR13612 is video switch that supports wide input voltage range. It can be employed in DP1.3/4
More informationMB4U BiSS, SSI, PC-USB 2.0 ADAPTER
Rev C2, Page 1/16 FEATURES USB 2.0 high speed PC interface FPGA based logic Hardware implemented interface protocols Fast realtime data communication (10 MHz BiSS; 4 MHz SSI) API for Windows : BiSS-Interface
More informationmotioncookie SYSTEM IN A PACKAGE
motioncookie SYSTEM IN A PACKAGE motioncookie TMCC160-EVAL MANUAL TMCC160 TMCL Hardware Version 1.1 Document Revision 1.0 2015-AUG-16 The TMCC160-EVAL is designed for evaluating all features of the TMCC160-LC
More informationic-hvxxxv 200 MHz LASER SWITCH preliminary WITH INTEGRATED POWER VCSEL ARRAY
Rev A1, Page 1/10 FEATURES VCSEL output from CW up to 200 MHz Integrated power VCSEL array Three independent channels for bias and pulse control TTL and LVDS inputs VCSEL array supply voltage up to 5.5
More informationZSSC4151 Evaluation Kit Hardware Manual
Important Notes Restrictions in Use IDT s ZSSC4151 SSC Evaluation Kit, consisting of the SSC Communication Board (SSC CB), ZSSC415x/6x/7x Evaluation Board (SSC EB), Sensor Replacement Board (SSC RB), and
More informationGetting started with X-NUCLEO-53L1A1 long distance ranging ToF sensor expansion board based on VL53L1X for STM32 Nucleo
User manual Getting started with X-NUCLEO-53L1A1 long distance ranging ToF sensor expansion board based on VL53L1X for STM32 Nucleo Introduction This document provides detailed hardware information on
More informationOM bit GPIO Daughter Card User Manual
OM13489 16-bit GPIO Daughter Card User Manual Rev. 2.0 09 January 2014 User manual Document information Info Content Keywords Fm+ Development Kit, OM13320, GPIO, OM13303 Abstract Installation guide and
More informationMB3U, MB3U-I2C BiSS, SSI, PC-USB ADAPTER
Rev C3, Page 1/16 FEATURES USB 2.0 compatible PC interface ic-mb3 TSSOP24 based BiSS master Hardware implemented interface protocols Fast realtime data communication (10 MHz BiSS; 4 MHz SSI) API for Windows
More informationX-NUCLEO-53L0A1 ranging and gesture detection sensor expansion board based on VL53L0X for STM32 Nucleo
User manual X-NUCLEO-53L0A1 ranging and gesture detection sensor expansion board based on VL53L0X for STM32 Nucleo Introduction This document provides detailed hardware information on X-NUCLEO-53L0A1 expansion
More informationic-hd2 QUAD DIFFERENTIAL LINE DRIVER
Rev A6, Page 1/8 FEATURES Complementary short-circuit-proof push-pull driver stages for RS422 and 24 V applications up to 2 MHz Pin-compatible to xx2068 Integrated line adaptation for high signal quality
More informationAS5161-EK-AB / AS5162-EK-AB 12 BIT Magnetic Angle Position Sensor
User Manual AS5161 / AS5162 Adapterboard AS5161-EK-AB / AS5162-EK-AB 12 BIT Magnetic Angle Position Sensor www.ams.com Revision 1.0 / 2012/10/31 Table of Contents 1. General Description... 2 2. Package
More informationic-wkp 15 V CW P-TYPE LASER DIODE DRIVER
Laser Rev A6, Page 1/1 FEATURES Optimised for P-type laser diodes (case grounded) CW operation up to 35 ma from 3 to 15 V supply voltage Rapid soft start after power-on Simple power adjustment via an external
More informationUM PCAL6524 demonstration board OM Document information
Rev. 1 23 September 2015 User manual Document information Info Content Keywords OM13320 Fm+ development kit, OM13260 Fm+ I2C bus development board, OM13303 GPIO target board Abstract Installation guide
More informationEVAL6235PD. L6235 three-phase brushless DC motor driver demonstration board. Features. Description
L6235 three-phase brushless DC motor driver demonstration board Features Operating supply voltage from 8 V to 52 V 5.6 A output peak current (2.8 A RMS ) Operating frequency up to 100 khz Non-dissipative
More informationEVALKIT-VL6180X. VL6180X plug-in and STM32 F401RE Nucleo board explorer kit. Description. Features
EVALKIT-VL6180X VL6180X plug-in and STM32 F401RE Nucleo board explorer kit Data brief Equipped with Arduino UNO R3 connector. RoHS compliant. Full system SW supplied, download from www.st.com/vl6180x in
More informationAN2672 Application note
Application note I²C application examples Introduction The I 2 C peripheral is very flexible, supporting standard interrupts in both 10-bit and 7-bit addressing modes. As a result, generated events are
More informationOperation Manual: AS5600-SO_EK_AB AS bit Programmable Contactless Potentiometer. Revision 1.0 /
: AS5600-SO_EK_AB AS5600 12-bit Programmable Contactless Potentiometer www.ams.com Revision 1.0 / 05.05.2014 page 1/10 Table of Contents 1 General Description... 3 1.1 Kit Content... 3 2 Getting Started...
More informationGenesys Logic, Inc. GL823. USB 2.0 SD/MMC Card Reader Controller. Datasheet
Genesys Logic, Inc. GL823 USB 2.0 SD/MMC Card Reader Controller Datasheet Rev. 1.00 Sep 21, 2009 Copyright Copyright 2009 Genesys Logic, Inc. All rights reserved. No part of the materials shall be reproduced
More informationEVB-USB2514Q36-BAS, USB2513 and USB Pin QFN Evaluation Board, Revision C User Manual
EVB-USB2514Q36-BAS, USB2513 and USB2512 36-Pin QFN Evaluation Board, Revision C User Manual Copyright 2009 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating
More informationSi7005USB-DONGLE. EVALUATION DONGLE KIT FOR THE Si7005 TEMPERATURE AND HUMIDITY SENSOR. 1. Introduction. 2. Evaluation Kit Description
EVALUATION DONGLE KIT FOR THE Si7005 TEMPERATURE AND HUMIDITY SENSOR 1. Introduction The Si7005 is a relative humidity and temperature environmental sensor in a 4 mm x 4 mm QFN package. Access to the sensor
More informationAS5261-EK-AB / AS5262-EK-AB 12 BIT Magnetic Angle Position Sensor with 2 Outputs
User Manual AS5261 / AS5262 Adapterboard AS5261-EK-AB / AS5262-EK-AB 12 BIT Magnetic Angle Position Sensor with 2 Outputs www.ams.com Revision 1.0 / 2012/10/31 Table of Contents 1. General Description...
More informationDEMO MANUAL DC1629A LTC2472: Selectable 250sps/1ksps 16-Bit, Differential, Σ ADC with SPI Interface DESCRIPTION
DESCRIPTION Demonstration circuit 9A features the LTC7, a -bit high performance Δ analog-to-digital converter (ADC) with an SPI interface. The input is differential with a range of ±V REF The modulator
More informationGENERAL DESCRIPTION MC3635 FEATURES
Quick Start Guide and Demo GENERAL DESCRIPTION The MC3635 is an ultra-low power, lownoise, integrated digital output 3-axis accelerometer with a feature set optimized for wearables and consumer product
More informationUSB-to-I2C. Ultra Hardware User s Manual.
USB-to-I2C Ultra Hardware User s Manual https://www.i2ctools.com/ Information provided in this document is solely for use with the USB-to-I2C Ultra product from SB Solutions, Inc. SB Solutions, Inc. reserves
More informationUSB-to-I2C. Professional Hardware User s Manual.
USB-to-I2C Professional Hardware User s Manual https://www.i2ctools.com/ Information provided in this document is solely for use with the USB-to-I2C Professional product from SB Solutions, Inc. SB Solutions,
More informationPlainDAC. PolyVection. embedded audio solutions DATASHEET. PlainDAC chip on module page
PlainDAC DATASHEET Audiophile digital-to-analog converter module with I2S input Document revision 1.0 July 2016 1 1 FEATURES Audiophile I2S DAC module Texas Instruments PCM5100 or PCM5121 or PCM5142 Two
More informationic-lfhxxx ic-lfh Series HIGH-RESOLUTION LINEAR IMAGE SENSORS Rev B1, Page 1/14
Rev B1, Page 1/14 FEATURES 1024/960/640/320 active photo pixels with 12.7 µm x 600 µm (2000 DPI) Pin-selectable resolution of 2000, 1000, 500 and 250 DPI (binning or averaging selectable) Integrating L-V
More informationUSB2I 2 C Programming Kit Quick-Start User s Guide
Revision A USB2I 2 C Programming Kit Quick-Start User s Guide General Description The SMX3203 USB programming system is used for device prototype development. The SMX3203 system consists of a programming
More informationUSB-to-I2C Basic. Hardware User s Manual.
USB-to-I2C Basic Hardware User s Manual http://www.i2ctools.com/ Information provided in this document is solely for use with the USB-to-I2C product from SB Solutions, Inc. SB Solutions, Inc. reserves
More informationAPPLICATION NOTE. Atmel AT01080: XMEGA E Schematic Checklist. Atmel AVR XMEGA E. Features. Introduction
APPLICATION NOTE Atmel AT01080: XMEGA E Schematic Checklist Atmel AVR XMEGA E Features Power supplies Reset circuit Clocks and crystal oscillators PDI TWI Introduction This application note describes a
More informationLevel Shifter. for. Hardware User s Manual.
Level Shifter for USB-to to-i2c Hardware User s Manual https://www.i2ctools.com/ Information provided in this document is solely for use with the I2C and SPI Level Shifter from SB Solutions, Inc. SB Solutions,
More informationWin-I2CUSB Hardware User s Manual
Win-I2CUSB Hardware User s Manual http://www.demoboard.com Information provided in this document is solely for use with the Win-I2CUSB product from The Boardshop. The Boardshop and SB Solutions, Inc. reserve
More informationAL5812EV3 User Guide 150mA, 60V Low-side Adjustable Linear LED Driver
General Description The AL5812 is an adjustable Linear LED driver offering excellent temperature stability and output handling capability. The AL5812 simplifies the design of linear and isolated or non-isolated
More informationUM OM bit GPIO Daughter Card User Manual. Document information. Keywords Abstract
OM13488 8-bit GPIO Daughter Card User Manual Rev. 1.0 11 October 2013 User manual Document information Info Keywords Abstract Content Fm+ Development Kit, OM13320, GPIO, OM13303 Installation guide and
More informationEVB-USB2517 Evaluation Board User Manual (Revision A)
EVB-USB2517 Evaluation Board User Manual (Revision A) Copyright 2009 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means
More informationEvaluation Board for CS3308. Description CS Channel. Digitally Controlled Analog Volume Control. PC or External Serial Control Input
Evaluation Board for CS3308 Features Description Single-ended Analog Inputs Single-ended Analog Outputs Supports AC and DC-Coupled Analog I/O Flexible Serial Control I/O Headers Serial Control Input Header
More informationST19NP18-TPM-I2C Trusted Platform Module (TPM) with I²C Interface Features
Trusted Platform Module (TPM) with I²C Interface Data brief Features Single-chip Trusted Platform Module (TPM) Embedded TPM 1.2 firmware I²C communication interface (Slave mode) Architecture based on ST19N
More informationI/O1 Xplained Pro. Preface. Atmel MCUs USER GUIDE
Atmel MCUs I/O1 Xplained Pro USER GUIDE Preface Atmel I/O1 Xplained Pro is an extension board to the Atmel Xplained Pro evaluation platform. I/O1 Xplained Pro is designed to give a wide variety of functionality
More informationic-hg 3 A LASER SWITCH
Rev A1, Page 1/19 FEATURES Six channel laser switch from CW up to 200 MHz CW operation with up to 500 ma per channel Spike-free switching of the laser current 6 x 1 channels with TTL inputs 3 x 2 channels
More informationPlease visit SMSC's website at for the latest updated documentation.
AN 10.13 Migrating from the LAN83C180 10/100 PHY to the 10/100 PHY 1 Introduction 1.1 Overview This application note discusses how to migrate from an existing design using the SMSC LAN83C180 PHY to SMSC's
More informationCDB4350 Evaluation Board for CS4350
Evaluation Board for CS4350 Features Description No High Frequency Master Clock Required Stand-Alone or PC GUI Board Control CS8416 Receives S/PDIF-Compatible Digital Audio Headers for External PCM Audio
More informationTable of Contents 1 Typical Applications General Description Block Diagram Pinout System Connections Typical A
Data Sheet: Product Preview Rev 0.3, 3/2014 Xtrinsic 3-Axis Digital Angular Rate Gyroscope is a small, low-power, yaw, pitch, and roll angular rate gyroscope. The full-scale range is adjustable from ±250
More informationTMCS-28 Hardware Manual
Accessories for Stepper & BLDC Motors ACCESSORIES TMCS-28 Hardware Manual Hardware Version V1.00 Document Revision V1.00 2017-Mar-01 TMCS-28 is a low-cost and small-size optical incremental encoder for
More informationUSB3319. Hi-Speed USB Transceiver with 1.8V ULPI Interface - 13MHz Reference Clock PRODUCT FEATURES. Applications. Data Brief
USB3319 Hi-Speed USB Transceiver with 1.8V ULPI Interface - 13MHz Reference Clock PRODUCT FEATURES Data Brief USB-IF Hi-Speed compliant to the Universal Serial Bus Specification Rev 2.0 Interface compliant
More informationEV Evaluation System User Guide. Contents. Kit Contents. Introduction
Contents EV2200 40 Evaluation System User Guide Section Page No. Introduction 1 Kit Contents 1 Hardware and Software Setup 2 Software Installation 2 Hardware Connection 2 Operation 2 Starting the Program
More informationEVB8720 Evaluation Board User Manual
Copyright 2011 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently,
More informationHDMI to FMC Module User Guide
HDMI to FMC Module User Guide Rev. 1.0.37-17 September 2015 http://www.exostivlabs.com 1 Table of Contents HMDI to FMC Module...3 Introduction...3 Features...3 Physical Dimensions...4 HDMI Connector...4
More informationFeatures. Description. Applications. Block Diagram PT7M3808. Fixed Voltage Diagram. Adjustable Voltage Diagram(PT7M3808G01)
Features Description Power-On Reset Generator with Adjustable Delay Time: 1.25ms to 10s. Very Low Quiescent Current: 2.8µA Typical High Threshold Accuracy: 0.5% Typ. Fixed Threshold Voltages for Standard
More informationAN3001 Application note
Application note Demonstration board user guidelines for the TS4657 single supply stereo digital audio line driver Introduction This application note focuses on the TS4657 demonstration board, designed
More informationGRF5110. Preliminary dbm Power-LNA Tuning Range: GHz. Product Description
Preliminary Product Description is a high linearity PA /Linear Driver with low noise figure (NF). It delivers excellent P1dB, IP3 and NF over a wide range of frequencies with fractional bandwidths of roughly
More informationMEAS HTU21D PERIPHERAL MODULE
MEAS HTU21D PERIPHERAL MODULE Digital Humidity and Temperature Digital Component Sensor (DCS) Development Tools The HTU21D peripheral module provides the necessary hardware to interface the HTU21D digital
More informationDIGITAL HUMIDITY SENSOR HYT-131
Rights reserved for change in technical data! B+B Thermo-Technik GmbH Postfach 1748 D-78158 Donaueschingen Phone: +49 771 8316-622 Fax: +49 771 8316-629 DIGITAL HUMIDITY SENSOR 1. Features - On-Chip humidity
More informationSTTS V memory module temperature sensor. Features
2.3 V memory module temperature sensor Data brief Features is a 2.3 V memory module temperature sensor forward compatible with JEDEC standard TS3000 and backward compatible with STTS424 Operating temperature
More informationEVB-USB2514Q48 48-Pin QFN Evaluation Board Revision A1
EVB-USB2514Q48 48-Pin QFN Evaluation Board Revision A1 Copyright 2007 SMSC or its subsidiaries. All rights reserved. The information contained herein is proprietary to SMSC and shall be used solely in
More informationEVB-USB82640 Evaluation Board Revision A User Manual
EVB-USB82640 Evaluation Board Revision A User Manual Copyright 2009 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means
More informationADT7470 Evaluation Board EVAL-ADT7470EB
Evaluation Board Data Sheet FEATURES On-board and remote temperature sensing On-board and remote fan control No calibration necessary Programmable over/under temperature limits USB serial interface Supports
More informationSILICON MICROSTRUCTURES
Digital Communication with SM5800 Series Parts OVERVIEW The SM5800 series pressure product offers the corrected pressure output in both analog and digital formats. Accessing the analog output is an easy
More informationXEELAS NODE MANUAL X-COM VERSION 1.0
This document is the official manual for the Xeelas LoRa Node. In this document, all the functions and technical specifications are described. X-COM VERSION 1.0 XEELAS NODE MANUAL Manual for Software version
More informationAN2737 Application note Basic in-application programming example using the STM8 I 2 C and SPI peripherals Introduction
Application note Basic in-application programming example using the STM8 I 2 C and SPI peripherals Introduction This application note is one of a set of application notes giving examples of how to use
More informationAKS16 Absolute Magnetic Sensing Head
Measuring Positioning KS1 bsolute Magnetic Sensing ead - Rotary applications - Linear applications - Non-contact, quick position measurement Features Lower case incremental 1 to 18 it absolute resolution
More informationNuvoton Touch Key Series NT1160 Datasheet
Nuvoton Touch Series Datasheet The information described in this document is the exclusive intellectual property of Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.
More information3D Magnetic Sensor 2 Go - TLE493D-A2B6
TLE493D-A2B6 3D-MS2GO User Manual About this document Scope and purpose This document provides an introduction to the 3D Magnetic Sensor 2 Go kit and should enable the reader to efficiently carry out own
More informationAK-DS2482S-100. Reference manual. Copyright 2016 Artekit Italy All rights reserved
AK-DS2482S-100 Reference manual Copyright 2016 Artekit Italy All rights reserved Contents About this document... 3 Revision history... 3 Contact information... 3 Life support policy... 3 Copyright information...
More informationic-lo EVAL LO1D EVALUATION BOARD DESCRIPTION
ic-lo EVAL LO EVALUATION BOAR ESCRIPTION Rev A, Page /3 ORERING INFORMATION Type Order esignation escription Options Evaluation Board ic-lo EVAL LO ic-lo Evaluation Board ready to operate, accessible through
More informationASM330LHH. Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope. Data brief. Features. Applications. Description
Data brief Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope Features LGA-14L Typ: (2.5 x 3.0 x 0.83 mm³) AEC-Q100 qualified Extended temperature range from -40 to +105 C Embedded compensation
More informationIMU Axis Gyro Evaluation Board Application Note
IMU-3000 3-Axis Gyro Evaluation Board Application Note A printed copy of this document is NOT UNDER REVISION CONTROL unless it is dated and stamped in red ink as, REVISION CONTROLLED COPY. InvenSense,
More informationZMID520xMLIN01201 Linear Application Module User Manual. Description. Features. Linear Module Summary. Kit Contents
ZMID50xMLIN00 Linear Application Module User Manual Description The ZMID50x application modules provide an easy demonstration of IDT s ZMID50x inductive sensing solutions for a specific application case.
More informationCables Manual ACCESSORIES. Cables for TRINAMIC products. Version V Jul-23
Cables for TRINAMIC products ACCESSORIES Cables Manual Version V1.00 2018-Jul-23 TRINAMIC offers various cables to connect their products. Below is an image of a cable which has a connector on one end,
More informationEvaluation Board User Guide UG-047
Evaluation Board User Guide UG-047 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Evaluating the ADT7310/ADT7410 Temperature Sensors
More informationHEDS Magnetic Encoder IC Programming Kit. User Guide. Device Description. Programming Kit Content
Magnetic Encoder IC Programming Kit Device Description Figure 1 IC Adapter Socket The AEAT-8800-Q24 is an angular magnetic rotary sensor used for accurate angular measurement and velocity over a full turn
More informationHS300x Datasheet. High Performance Relative Humidity and Temperature Sensor. Description. Features. Physical Characteristics. Typical Applications
High Performance Relative Humidity and Temperature Sensor HS300x Datasheet Description The HS300x series is a highly accurate, fully calibrated relative humidity and temperature sensor. The MEMS sensor
More informationEVB-USB2640 Evaluation Board Revision A
Copyright 2008 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently,
More information*Note: Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Figure 1.
EVALUATION DONGLE TEMPERATURE AND HUMIDITY SENSORS 1. Introduction This user s guide describes the evaluation GUI and PCB board design for the following evaluation kits: Si701USB-DONGLE kit for Si701,
More informationFigure 1. 8-Bit USB Debug Adapter
8-BIT USB DEBUG ADAPTER USER S GUIDE 1. Introduction The 8-bit USB Debug Adapter (UDA) provides the interface between the PC s USB port and the Silicon Labs 8-bit target device s in-system debug/programming
More informationMPU-6000/MPU Axis Evaluation Board User Guide
MPU-6000/MPU-6050 9-Axis Evaluation Board User Guide InvenSense, Inc., 1197 Borregas Ave., Sunnyvale, Ca 94089, USA 1 AN-MPU-6000EVB-00 Table of Contents 1. REVISION HISTORY... 3 2. PURPOSE... 4 2.1 USAGE...
More information