C E R T I F I C A T E O F C O M P L I A N C E

Transcription

1 Issued to: GE LIGHTING SOLUTIONS L L C BLDG 338E 1975 NOBLE RD EAST CLEVELAND OH This is to certify that representative samples of COMPONENT - SIGN ACCESSORIES See addendum pages Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 879, Electric Sign Components CSA-C22.2 No. 207-M89, Portable and Stationary Electric Signs and Displays See the UL Online Certifications Directory at for additional information Only those products bearing the UL Recognized Component Marks for the U.S. and Canada should be considered as being covered by UL's Recognition and Follow-Up Service and meeting the appropriate U.S. and Canadian requirements. The UL Recognized Component Mark for the U.S. generally consists of the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL s Component Recognition Program, UL s Recognized Component Mark:, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under Markings for the individual recognitions. The UL Recognized Component Mark for Canada consists of the UL Recognized Mark for Canada: and the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Recognized Component Mark on the product. Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 1 of 6

2 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. USR, CNR - Component Sign accessory, Class 2. LED Strip Light, Cat. Nos. GE-XX-XX-X-XXX, GE-XX-XX-XX-XXX, GE-XX-XX-XXX-XXX, GE-XX-XX-XXXX-XXX, GE-XX- XX-XXXXX-XXX, GE-XX-XX-XXXXXX-XXX, GE-XX-XX-XXXXXXX-XXX, GE-XX-XX-XXXXXXXX-XXX, GE-XX-XX- XXXXXXXXX-XXX, catalog numbers may vary per nomenclature. GE followed by: XX representing color: RD, RC, YG, GL, SB, BL, WH, YA, WW, GR, PO, followed by: XX representing product line: CL, DS, XL, PT, XN, TM, MX, TU, PG, PX, PH, XH, MH, SS, PM, MM, MH, BS, BD, BI followed by: X to XXXXXXXXX representing light strip final assembly or number of LEDs per foot: LA, LE, AA, SX, LX, WXX, TXX, PX, XX followed by: XXX denotes any alphanumeric character that represents the color temperature of the LEDs. (Refer to Nomenclature for further details). * *LED Strip Light, Cat. Nos. GE-AA-BB-CC, where AA may be DS, XN, XNL, XNA, MX, MXL, PG, MM, MMD, SS, PM, PMD, MXH, MXHL, BS, BD, BI, BIH, BSH, BDH, DSH, SSH, SS24H, F12T2 or MS which represent product line; BB may be RD, RC, YG, GL, SB, BL, WH, YA, WW, GR, PO or any alphanumeric character; and CC may be any alphanumeric characters or blank. Accessories Components: USR, CNR - Component Sign accessory. Splice Connectors, Supply Wires and End Caps. GE-XX-XX-XX (See Table 2 nomenclature below). Power Strip rail Cat. No. GEDSRLXX where XX denotes the length of the rail in feet up to 24 feet (See. Fig. 11 and ILL. 16 for further details) L-bracket connector: Cat. No. GEDSLB1 (See ILL. 17 for further details) Tetra extender mounting clip and extender rod: Cat. No. GEDSARC1 (see Fig. 11 for details). Tetra Mounting Rail Clip: Cat. No. GEDSRC1 (See Fig. 11 for details). Line Fit Light End Cap: Cat. No. GEDSREC1 (see Fig. 12 for details). NOMENCLATURE: Nomenclature for LED Strip Light: GE-XX-XX-X-XXX, GE-XX-XX-XX-XXX, GE-XX-XX-XXX-XXX, GE-XX-XX-XXXX-XXX, GE-XX-XX-XXXXX-XXX, GE-XX-XX-XXXXXX-XXX, GE-XX-XX-XXXXXXX-XXX, GE-XX-XX-XXXXXXXX-XXX, GE-XX- XX-XXXXXXXXX-XXX. Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 2 of 6

3 First Set of XX denotes the color of the LED RD Red family RC Red/Orange family YG yellow family GL Green family SB, BL Blue Family WH White YA Amber WW Warm White GR Green PO Portland Orange Second Set of XX denotes product line (Legacy Gen 1) CL channel letter DS Power Strip DS XL tetra long strip PT power tetra XN, XNL, XNA Exposed Neon, Contour or Contour LS TM Mini MX, MXL Max TU Ultra PG Power Grid PX Power White XL PH Power White HO XH Power White XL HO MM, MMD Mini Max SS Power Strip PM, PMD Power Max MH, MXH, MXHL MAX HO BS MiniStrip BD MiniStrip DS BIH Edgestrip High Output Table 1 Third set of XX denotes Light Strip final assembly as noted below: LA Light Strip, assembled inside a plastic rod, 8 foot section LE Light Engine means same as Light strips AA Light engine, assembled inside a plastic rod, 16 inch section SX or X Number of LEDs per foot where X is 1 6 LEDs per foot etc. (X can be representative of 1 to 9 digits) TXX Three LED Modules, where the first X describes the PCB length, S for Short, and L for Long, and the second X is an alpha numeric character of led s per foot. WXX Wide Angle light diffuser, where the first X describes the PCB length, A for regular and L for long, and the second X is an alpha numeric character of leds per foot. PX For PowerGrid (PG), Power Strip (SS) and Double Sided Power Strip (DS) only, where x equals the number of LEDs per foot. Not Assembled in Tube. An optional X Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 3 of 6

4 may be added to denote wire length between modules where X is S for short, M for Medium, and L for Long. XX only to be used with DS product line, xx is number that correlates to total length in inches (48 48 ) assembled in acrylic tube. Last XXX denotes any alphanumeric character that denotes the Color Temperature of the LEDs i.e. 30k 3000, 35k 3500, 65k 6500, 75k 7500 etc. NOMENCLATURE: Nomenclature for Splice Connectors, Supply Wires, End Caps. GE-XX-XX-XX (All Generations) First Set XX denotes product line CL channel letter * DS Power Strip DS XL tetra long strip PT power tetra XN, Exposed Neon, or Contour or Contour LS XNL, or XNA TM Mini MX, MXL Max TU Ultra PG Power Grid PX Power White XL PH Power White HO XH Power White XL HO MM, MMD Mini Max SS Power Strip PM, PMD Power Max MH, MAX HO MXH, MXHL BS MiniStrip BD MiniStrip DS BIH BSH BDH DSH SSH SS24H Edgestrip High Output MiniStrip High Output Mini Strip DS High Output PowerStrip DS High Output PowerStrip High Output High Output BI Edgestrip MS MINI Max MS Table 2 Second Set of XX product type EC End Cap SW Supply Wire Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 4 of 6

5 SC Splice Connector TC tube connector AT acrylic tube (for use with Power Grid (PG) and Power Strip (SS) or (DS) assembled series. XX Design revision number, or length for DS product line Can represent any number 01 thru 99. Nomenclature for LED Strip Light: Cat. Nos. GE-AA-BB-CC AA denotes product line and assembly version as noted below: Product Line (Gen 2) Product Line DS XN XNL XNA MX MXL PG MM MMD SS PM PMD MXH MXHL BS BD BI BIH BSH BDH DSH F12T12 SSH or SS24H MS Description Power Strip DS Exposed Neon or Contour Contour LS (Light Strip, assembled inside a plastic rod, 8 foot section) Contour LS (Light engine, assembled inside a plastic rod, 16 inch section) Max (3 LEDs per Module) Max, Long Board Power Grid Mini Max (3 LEDs per Module) Optional - Mini Max (Two LEDs per Module) Power Strip Power Max (3 LEDs per Module) Optional - Power Max (2 LEDs per Module) MAX HO (3 LEDs per Module, except for Red may have 3 or 4 LEDs) Max HO, Long Board MiniStrip MiniStripDS Edgestrip Edgestrip High Output MiniStrip High Output MiniStrip DS High Output PowerStrip DS High Output Line Fit Light PowerStrip High Output MiniMax MS Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 5 of 6

6 BB denotes the color of the LED RD Red family RC Red/Orange family YG yellow family GL Green family SB, BL Blue Family WH White YA Amber WW Warm White GR Green PO Portland Orange; Table 3 Or for White or Warm White, any alphanumeric character that denotes the Color Temperature of the LEDs i.e. 30k 3000, 35k 3500, 65k 6500, 75k 7500, DHOLED, CWHOLED, SGNHOLED etc. CC (Optional) any alphanumeric suffix that denotes LED strip revision otherwise complying with current report revision and non-safety related. The LED strips, wire, splice connectors and end caps may be used in indoor or outdoor signs and maybe used in new sign construction. Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 6 of 6