SFP+ Connector and Cages. Product Presentation
|
|
|
- Baldric Barber
- 5 years ago
- Views:
Transcription
1 SFP+ Connector and Cages Product Presentation
2 SFP+ I/O System SFP+ (Small Form factor Pluggable) Next generation SFP Single (1x) channel 10Gb/s per channel capability SFF- 8431& 8461 Fully qualified I/O link From transmitter to receiver Link qualification includes connectors & cable assembly Accepts SFP+ copper cable assemblies or optical SFP+ transceivers System management interface EEPROM programming Support bandwidth requirements of: 10 Gigabit Ethernet( 10G Base- CU) 8G Fibre Channel (FC) 10G Fibre Channel over Ethernet (FCoE) 2
3 SFP+ PCB Connector SFP+ R/A 20 Position Connector Halogen Free RoHs compliant SMT termination Durability: 250cycles 0.5 amps per contact Tape & reel packaging Product specification: GS Application specification: GS Backward compatible with SFP footprint Standards SFF8083 Mating Interface and performance requirements SFF8431 Electrical Interface Specifications FCI P/N Contact Interface LF 30u " q old plathl J LF 15u '' G XT p lating_ 3
4 SFP+ Cages Press- fit version Additional tails for EMI suppression Tray packaging Nickel Silver Alloying EMI fingers Stainless steel or copper alloy Heat sink : Aluminum Alloy 1x1,1x2 and 1x4 cages offer such option Light pipe : Clear polycarbonate 1x1 and 1x4 cages offer such option Product Specification: GS Application specifications: GS Standards Flammability : UL94V-0 SFF-8433: Improved Pluggable Form factor (ipf) for SFP+ Ganged Cages SFP-MSA: Cooperation Agreement for Small Form-Factor Pluggable Transceivers EIA 364: Electrical Connector/Socket Test Procedures Including Environmental Classification 4
5 SFP+ 1x1 cages, 3 different footprint options The 1x1 cage with EMI fingers 3 tails in Top cage & 3 in bottom cage for EMI suppression The version without hole ( LF) The version with hole ( LF) for air ventilation Tails on top to bottom cage will provide additional extraction force if soldered. These footprints are compatible with most other suppliers 5
6 SFP+ 1x1 cages, 3 different footprint options The 1x1 cage with EMI fingers 3 Tails in Top cage & 1in bottom cage with hole with insulation tape. ( LF) Insulation tape prevents shorts from the cage to the P C B traces Tails on top or bottom cage will provide additional extraction force if soldered. These footprints are compatible with most other suppliers... :...--r-- 3 compliant pins 6
7 SFP+ 1x1 cages, 3 different footprint options The 1x1 cage with EMI fingers 3 tails in Top cage & none in bottom cage (EMI suppression), with hole ( LF) Tails on Top or bottom cage will provide additional extraction force if soldered. These footprints are compatible with most other suppliers 7
8 SFP+ 1x1 cages, 3 different footprint options The 1x1 cage with EMI fingers 2 Tails in Top cage with hole (for EMI suppression) The version with additional tails( lf) The version without additional tails ( LF) Tails on Top or bottom cage will provide additional extraction force if soldered. These footprints are compatible with most other suppliers 8
9 SFP+ 1x1 cages: accessory options The 1x1 cage with EMI fingers Light pipe( lf ), shorter light pipe saves board space Long distance (9.6 mm) light pipe( lf) provides additional routing space With heat-sink( lf) 9
10 SFP+ 1x2 cages The 1x2 cage with EMI fingers Standard part: ( LF) Heat-sink option ( LF) With heat-sink and light pipe( lf) 10
11 SFP+ 1x3 cages The 1x3 cage with EMI fingers With heat sink and lightpipe ( LF) Heat-sink option ( LF) 11
12 SFP+ 1x4 cages The 1x4 cage configurations Standard parts -with solderleg LF) -without solder leg LF) Light pipe version ( LF ) Heat-sink version ( LF) Belly to Belly mount possible 12
13 SFP+ 1x6 cages The 1x6 cage configuration Standard parts ( LF) With heat sink and Light pipe version( lf ) Heat-sink version optional( lf) Belly to Belly mount possible 13
14 SFP+ Connector and Cages SFP+ Connector and Cage Part Number Type Product number Product description LF SFP+ 1X1 CAGE w/ lightpipe LF SFP+ 1X1 CAGE w/ long distance lightpipe LF SFP+ 1X1 CAGE w/ heatsink LF SFP+ 1X1 CAGE w/o hole w/ solderleg 1X LF SFP+ 1X1 CAGE w/ hole w/ solderleg LF SFP+ 1X1 CAGE w/ hole w/o solderleg LF SFP+ 1X1 CAGE w/ hole w/ 2 top cage tail w/ solderleg LF SFP+ 1X1 CAGE w/ hole w/ 2 top cage tail w/o solderleg LF SFP+ 1X1 CAGE w/ hole w/ solderleg PIP type LF SFP+ 1X2 CAGE w/ heatsink LF SFP+ 1x2 cage with compliant pin, nickel plated 1X LF SFP+ 1x2 cage with heatsink low profile LF SFP+ 1x2 cage with Flat heatsink LF SFP+ 1x2 cage with heatsink and lightpipe LF SFP+ 1x2 cage with heatsink and lightpipe and thermal pad LF SFP+ 1x3 cage 1X LF SFP+ 1x3 cage with heatsink LF SFP+ 1x3 cage with heatsink and lightpipe LF SFP+ 1X4 CAGE w/ solderleg 1X LF SFP+ 1X4 CAGE w/o solderleg LF SFP+ 1X4 CAGE w/ lightpipe LF SFP+ 1X4 CAGE w/ heatsink LF SFP+ 1x6 cage 1X LF SFP+ 1x6 cage with heatsink LF SFP+ 1x6 cage with Flat heatsink LF SFP+ 1x6 cage with heatsink and lightpipe Board Conn LF SFP+ Board connector,0.76μm(30μin) gold plating LF SFP+ Board connector,0.38μm(15μin) GXT plating 14
15 SFP+ Connector and Cages Documentation available on FCI s website Product data sheet Product Drawings Product specification Electrical models 3-D mechanical models Electrical test reports Application specifications Web links Electrical test boards available upon request Connector & cage qualification- Available 15
16 THANK YOU
SFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
SFP (Small Form-factor Pluggable) Products
SFP (Small Form-factor Pluggable) Products As a founding member and innovator for the Small Form-factor Pluggable (SFP) Multi-Source Agreement (MSA), TE supports the market with a full range of SFP products.
SFP (Small Form-factor Pluggable) Products
SFP (Small Form-factor Pluggable) Products As a founding member and innovator for the Small Form-factor Pluggable (SFP) Multi-Source Agreement (MSA), Tyco Electronics supports the market with a full range
Xmultiple Technology SFP Products Information
Xmultiple Technology SFP Products Information SFP Products Fiber Channel InfiniBand Ethernet SFP Product Types Optic Modules SFP System Copper HSSDC2 Module HSSDC2 Cable Assemblies PT Connectors SFP History
28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion to
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion to
zsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion
zsfp+ (Small Form-factor Pluggable Plus) 25 Gbps Interconnect System
Molex launches the first complete for serial channels, delivering unparalleled signal integrity with superior EMI protection for next-generation Ethernet and Fibre Channel applications Molex s complete
Amphenol. Amphenol. I/O Products. High Speed Interconnects
Amphenol High Speed Interconnects I/O Products Amphenol Now you re Now you re connected connected Amphenol High Speed Interconnects THE COMPANY Amphenol is a global provider of interconnect solutions to
z-quad SMALL FORM-FACTOR PLUGGABLE PLUS (zqsfp+ OR QSFP28/56) INTERCONNECT SYSTEM
z-quad SMALL FORM-FACTOR PLUGGABLE PLUS (zqsfp+ OR QSFP28/56) INTERCONNECT SYSTEM Quick Reference Guide te.com/products/qsfp Introducing zqsfp+ Interconnect System TE Connectivity s (TE) zqsfp+ interconnects
HIGH SPEED I/O PRODUCTS
HIGH SPEED I/O PRODUCTS A M P H E N O L C O M M E R C I A L P R O D U C T S Amphenol N o w y o u r e c o n n e c t e d AMPHENOL COMMERCIAL PRODUCTS THE COMPANY Amphenol is a global provider of interconnect
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 0.80mm (.031") Pitch Small Form-Factor Pluggable (SFP) Receptacle 74441
I/O Products. Cable Assemblies High Performance I/O Cable Assemblies...N-92 to N-94
N High Speed Pluggable I/O Solutions Small Form-Factor Pluggable (SFP) Connectors...N-2 to N-3 Cable Assemblies...N-7 to N-8 Tranceiver... N-9 EMI Plug... N-9 Stacked Connectors...N-4 to N-6 SFP+ Cages...
QSFP (Quad Small Form-factor Pluggable) Products
QSFP (Quad Small Form-factor Pluggable) Products Switches Routers Host bus adapters Enterprise storage High performance computing The Quad Small Form-factor Pluggable (QSFP) product line from TE Connectivity
HIGH SPEED INPUT/OUTPUT SOLUTIONS QUICK REFERENCE GUIDE
HIGH SPEED INPUT/OUTPUT SOLUTIONS QUICK REFERENCE GUIDE The pluggable I/O interface offers significant advantages as a high speed I/O interconnect. With a standard equipment I/O interface and the flexibility
HDMI Product Presentation
HDMI Product Presentation Where does IO-connections stand for? FCI's I/O connector solutions: high-density high-speed interfaces Applications: networking, storage, and memory, power distribution, media
CFP2(CN121 series) Application Specification
CFP2(CN121 series) Application Specification Note All numerical values are in metric units. Dimensions are in millimeters. Unless otherwise specified, dimensions have a tolerance of ±0.30 mm and angles
High Speed I/O Connectors Product Catalog. Now You re Connected International Edition
High Speed I/O Connectors Product Catalog Now You re Connected International Edition ABOUT AHSI For over 80 years, Amphenol has been a premier provider of advanced technology interconnect products to the
HSSDC. HSSDC High Speed Serial Data Connection receptacles. HSSDC Receptacle. U45 - A APPLICATIONS ORDERING INFORMATION
HSSDC High Speed Serial Data Connection receptacles meet high-speed differential communication protocols with speeds exceeding 1 Gbps such as IEEE 802.3z and Fibre Channel. This system is designed to conform
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
RoHS-Compliant Small Form Factor Pluggable Press-Fit PCI Compliant SFP Cage PL-KP
Communications modules & subsystems RoHS-Compliant Small Form Factor Pluggable Press-Fit PCI Compliant SFP Cage PL-KP-00-000-6 Key Features Compatible with all MS-compliant SFP transceivers Enhanced EMI
CFP2(CN121 series) Application Specification
CFP2(CN121 series) Application Specification Note All numerical values are in metric units. Dimensions are in millimeters. Unless otherwise specified, dimensions have a tolerance of ±0.30 mm and angles
Right Angle 2.0mm Pitch Connector
AVX extends their board-to-board right angle connectors with a new 2mm pitch version, an addition to the existing versions 9155-300 with a 3mm pitch and 9155-500 with a 2.5mm pitch. This new connector
Pluggable Input / Output Solutions
Pluggable Input / Output Solutions Disclaimer While Tyco Electronics Corporation and its affiliates referenced herein ( Tyco Electronics ) have made every reasonable effort to ensure the accuracy of the
THRU BEZEL-COPPER THRU BEZEL-ELASTOMERIC BEHIND THE BEZEL
9054 Series QSFP+ Cage RoHS COMPLIANT THRU BEZEL-COPPER THRU BEZEL-ELASTOMERIC BEHIND THE BEZEL QSFP+ MSA compliant (SFF-8436) Robust design Unique spring loaded heat sink clip Choice of 2 lightpipe designs
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
zqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe
zqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe Application Specification 114-32023 02 MAR 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
Inverted Thru Board Card Edge: BTB
AVX has developed the 1-Piece bottom entry card edge connector to allow a perpendicular PCB to be mated to a top mounted main FR4 or metal core PCB from the bottom side. The most popular application on
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
DX07 Series USB Type-C Connector
v3.0 DX07 Series USB Type-C Connector Product Information Module Japan Aviation Electronics Industry, Ltd. Proprietary. Copyright 2017, Japan Aviation Electronics Industry, Ltd. JAE DX07 Series USB Type-C
AirMax POWER CONNECTOR MODULES Part of the AirMax Connector Family
Part of the AirMax Connector Family HIGH PERFORMING AND DURABLE CONNECTORS Hard Metric high power connectors are a perfect complement to AFCI s ExaMAX, AirMax, ZipLine and Millipacs signal connectors.
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. UHD FEATURES & BENEFITS 0.100 x 0.050 staggered grid - High density optimizes trace routing through the backplane
Test Development Validation Production. Micro-BGA Socketing System BGA Socket Adapter System Flip-Top BGA Socket BGA Interposer
Test Development Validation Production Micro-BGA Socketing System BGA Socket Adapter System Flip-Top BGA Socket BGA Interposer BGA Socket Adapter Systems Micro-BGA Socket Adapter System 0.50mm and 0.65mm
Test Development Validation Production. Micro-BGA Socketing Systems BGA Socket Adapter Systems Flip-Top BGA Sockets BGA Interposers
Test Development Validation Production Micro-BGA Socketing Systems BGA Socket Adapter Systems Flip-Top BGA Sockets BGA Interposers BGA Socket Adapter Systems Micro-BGA Socket Adapter System 0.50mm and
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
Product specification
SMT Modular Jack single port vertical and horizontal 1 of 12 H PAGE 1.0 OBJECTIVE 2 2.0 SCOPE 2 3.0 GENERAL 2 4.0 DEFINITIONS 3.1 Qualification 2 3.2 Material 2 3.3 Finish 2 3.4 Design and construction
PRODUCT SPECIFCATION GS MINI-SAS HD External Cable to Board Connector System. 1 of 14 F. Roger Cheng TYPE NUMBER
1 of 14 F TABLE OF CONTENTS 1.0 OBJECTIVE... 3 2.0 SCOPE... 3 3.0 APPLICABLE DOCUMENTS... 3 3.1 FCI SPECIFICATIONS... 3 3.2 OTHER STANDARDS AND SPECIFICATIONS... 3 3.3 FCI PRODUCT QUALIFICATION TEST REPORTS...
ModularJacks. Amphenol Now You re Connected!
ModularJacks Amphenol Now You re Connected! Amphenol The Company Amphenol Commercial Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
Bergstak 0.80mm Pitch Product Presentation
Bergstak 0.80mm Pitch Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
Product Specification
USB A CONNECTOR 1 of 7 J 1.0 GENERAL This specification defines the performance, tests and quality requirements for the USB A connector. This document is composed of the following sections. 1. General
RoHS-Compliant Small Form Factor Pluggable Press-Fit Cage, 2.19 mm Pin Length PL-KP
COMMUNICTIONS MODULES & SUBSYSTEMS RoHS-Compliant Small Form Factor Pluggable Press-Fit Cage,.19 mm Pin Length PL-KP-00-000-16 Key Features Compatible with all MS-compliant SFP transceivers and PCB layouts
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
10GB ETHERNET SFP+ ULTRA LOW POWER SR OPTICAL TRANSCEIVER
OPTICAL INTERCONNECT 10GB ETHERNET SFP+ ULTRA LOW POWER SR OPTICAL TRANSCEIVER OVERVIEW FCI s TRX10GVP2010C2 10Gb/s Ethernet 850nm Multi Mode SFP+ SR Optical Transceiver is designed for datacenter networking
ExpressCard Host System
ExpressCard Host System Where does IO-connections stand for? FCI's I/O connector solutions: high-density high-speed interfaces Applications: networking, storage, and memory, power distribution, media card
OSFP Connector Cage & Cable System
PAGE /6 /5/7 UNRESTRICTED OSFP Connector Cage & Cable System PAGE /6 /5/7 UNRESTRICTED.0 SCOPE This Product Specification covers performance, test and quality requirements for the JPC Quad Small Form Factor
MDI for 4x25G Copper and Fiber Optic IO. Quadra (CFP4 proposal) Connector System
MDI for 4x25G Copper and Fiber Optic IO Quadra (CFP4 proposal) Connector System Nov 7, 2011 Nathan Tracy, TE Connectivity Tom Palkert, Molex 4x25Gb/s MDI Potential Requirements Critical Needs: Excellent
Vertical Top Entry Card Edge: BTB
AVX continues to develop unique connectors to fill the gap in the industrial market, specifically as it relates to low pin count requirements. The newest addition to AVX s broadening line of one piece
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
Modular Jack Slimline Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Overview Product Specifications Features & Benefits Markets & Applications Collaterals Product Presentation- 2 Value Proposition Amphenol
ModularJacks. Amphenol
ModularJacks Amphenol Amphenol The Company Amphenol Commercial Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada.
XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
ModularJacks. Amphenol
ModularJacks Amphenol Amphenol Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities
SSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
MAXIMUM SOLUTIONS. New Low Profile Target Connectors
MAXIMUM SOLUTIONS New Low Profile Target Connectors Mill-Max is excited to announce the release of our lowest profile target connectors with an above board height of only (2,21mm). Target connectors are
Fine-Coax Wire Connector for Portable Devices. FI-JH Series
COMPONENTS PRODUCT INFORMATION NEW Fine-Coax Wire Connector for Portable Devices FI-JH CONNECTOR MB-0179-1 November 2007 RoHS Compliant In addition to incorporating new functions such as one
Minitek Pwr 4.2 HCC Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Markets & Applications Marcomm Collaterals Product Presentation 2
ModularJacks. Amphenol
ModularJacks Amphenol Amphenol Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities
SYSTEM CONNECTORS FOR W-CDMA
SYSTEM CONNECTORS COMPLINT WITH EIJ RC-5238 (CONNECTOR FOR IMT-2000 MOBILE PHONES) SYSTEM CONNECTORS FOR W-CDM Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) Plug Signal 10
USB Type-C TM Connector DX07 Series Vertical Plug
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Vertical Plug CONNECTOR MB-0332-1 July 2018 RoHS Compliant *Plug will be packaged with protective cap on. Protective Cap The DX07
SOFIX - A fully shielded front IO solution. Product Presentation
- A fully shielded front IO solution Product Presentation Product Description SOFIX is a front IO interconnection system comprised of R/A headers and cable plugs, suitable for the distribution of power
Minitek Pwr 4.2 BMI Product Presentation
BMI Product Presentation Basics Portfolio BMI Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Stacking Height Matrix Markets & Applications Collaterals
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
ModularJacks. Amphenol
ModularJacks Amphenol Amphenol Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities
MAXIMUM SOLUTIONS (2/14 -- PR606) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY Fax:
MAXIMUM SOLUTIONS Mill-Max Series 854 Single Row and 855 Double Row Pitch Surface Mount and Through-Hole Spring-Loaded Connectors and Mating Target Connectors Mill-Max has developed high density, (1,27
Meet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
micro QUAD SMALL FORM-FACTOR PLUGGABLE FOUR CHANNEL PLUGGABLE TRANSCEIVER, HOST CONNECTOR, & CAGE ASSEMBLY FORM FACTOR
1 2 3 4 5 6 7 8 9 10 11 microqsfp Draft Mechanical Specification Rev 1.0 Draft Mechanical Specification for micro QUAD SMALL FORM-FACTOR PLUGGABLE FOUR CHANNEL PLUGGABLE TRANSCEIVER, HOST CONNECTOR, &
USB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
RoHS-Compliant Small Form Factor Pluggable Press-Fit Cage
PL-KP2-00-000-xx The unique RoHS-Compliant, one-piece, pluggable, pressfit cage represents one of Picolight s complementary products to the Small Form Factor Pluggable (SFP) transceivers. Optimized for
USB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
ExaMAX High Speed Backplane Connector System Innovative pinless connector system delivering superior electrical performance at speeds 25Gb/s to 56Gb/s
Innovative pinless connector system delivering superior electrical performance at speeds 5Gb/s to 5Gb/s SUPPORTS MANY INDUSTRY STANDARD SPECIFICATIONS; MIGRATION PATH TO HIGHER BANDWIDTH APPLICATIONS ExaMAX
Pwr Blade+ Customer Presentation. Daisy Liu. April 2014
Customer Presentation Daisy Liu April 2014 High Performance PwrBlade Connector - Overview Similar to PwrBlade but with an enhanced power contact design for increased linear current density Includes a 48
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
microsd Card Connectors
NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..
APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
Small Form Factor Pluggable Press-Fit Cage
PL-KP2-00-000-15 The unique one-piece, pluggable, press-fit cage represents one of Picolight s complementary products to the Small Form Factor Pluggable (SFP) transceivers. Optimized for use with all transceiver
CF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications
Introducing MULTIGIG RT 2-R. Ruggedized Connectors for VPX Applications
Introducing for VPX Applications High Speed Copper Cables associated VPX SOLUTIONS MEZALOK Mezzanine (Compliant to VITA 61) Utilizes the proven, reliable MIL-55302 Mini-Box contact interface, with four
TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS PCB D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
microsd Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
PwrMAX High Power Connector System (Preliminary)
1 of 14 5 1.0 OBJECTIVE 2.0 SCOPE This specification defines the performance, test, quality and reliability requirements of the PwrMAX Power Connector System. 3.0 GENERAL This specification is applicable