ExaMAX High Speed Backplane Connector System Innovative pinless connector system delivering superior electrical performance at speeds 25Gb/s to 56Gb/s
|
|
|
- Donald Skinner
- 6 years ago
- Views:
Transcription
1 Innovative pinless connector system delivering superior electrical performance at speeds 5Gb/s to 5Gb/s SUPPORTS MANY INDUSTRY STANDARD SPECIFICATIONS; MIGRATION PATH TO HIGHER BANDWIDTH APPLICATIONS ExaMAX backplane connector system meets industry specifications requiring higher bandwidth applications from 5Gb/s to 5Gb/s. The optimized connector design delivers superior signal integrity performance resulting in low crosstalk noise and low insertion loss while minimizing channel performance variation for every differential pair. Each signal wafer incorporates an innovative onepiece, embossed ground structure to improve crosstalk performance through 5Gb/s. The simple, functional design contributes to a verycost-effective solution. The innovative beam-on-beam contact interface minimizes residual stub for improved signal integrity performance while providing exceptionally low mating forces ExaMAX optimizes design flexibility by integrating high speed differential signals, low speed signals and power in one connector ExaMAX product family is offered in industry standard packaging options including traditional backplane, coplanar board, orthogonal midplane and orthogonal direct mate, mezzanine and cable to board FEATURES TARGET MARKETS BENEFITS Data rates scalable from 5Gb/s to 5Gb/s to support system upgrades without costly redesigns 9Ω nominal impedance Scalable performance Meets Industry specifications such as Optical Internetworking Forum (OIC), PCI Express, SATA, Fiber Channel, Infiniband, Ethernet, SAS, IBTA and IEEE Minimizes impedance discontinuities Backwards mating and footprint compatible with ExaMAX VS Unique beam-on-beam interface and skew equalized leadframes Provides low crosstalk while eliminating insertion loss resonances Reduces mating force up to 5% compared to traditional blade and beam designs Hermaphroditic mating interface protects mating beams Durable, reliable mating interface design eliminates crushed pins Modular, hard metric connector block design mm pitch for high density application mm pitch enables quad routing and lower PCB cost Zero skew Optimizes PCB routing Additional signal pin per column Integrates high and low speed signals in the same connector High speed signal PCB hole: 0.mm (finished hole) Ground pin PCB hole: 0.5mm (finished hole) Optimizes electrical performance and aspect ratio 1 to 9 differential pair node connector Wide product range for various packaging options Integrated guide design Improves mating performance using minimal board space Amphenol Information Communications and Commercial Products
2 TECHNICAL INFORMATION SIGNAL INTEGRITY PERFORMANCE ELECTRICAL PERFORMANCE Contact Resistance: 0mV max., 100mA current Insulation Resistance: 500VDC Dielectric Withstanding Voltage: 500VDC Current Rating (with 0 C T-rise above ambient) Signal contact: 0.5A/Contact (both signal and ground contacts can carry current) APPROVALS AND CERTIFICATIONS Telcordia GR-117-CORE Central Office qualification passed UL E90 ENVIRONMENTAL Operating Temperature: -55 C to +85 C SPECIFICATION Amphenol Product Specification: GS Amphenol Packaging Specification: GS-0-01 INDUSTRY SPECIFICATIONS Industry Specifications PCI Express (PCIe) Gen 1/// Serial Attached SCSI (SAS) 1.1/.1/.0/.0 SATA Revision 1.x/.x/.x Fibre Channel (FC) Gen1/ Gen/Gen/Gen/Gen5 InfiniBand (IB) SDR/DDR/QDR/FDR/EDR Speed Performance.5Gb/s to 1Gb/s Gb/s to Gb/s 1.5Gb/s to Gb/s 1.05Gb/s to 1.05Gb/s.5Gb/s to 5Gb/s MATERIAL Contacts: High performance Copper Alloy Plating(s): Performance-based plating at separable interface (Telcordia GR-117-CORE) Tin over Nickel on press-fit tails Housings: High Performance Thermoplastic, UL9-V0 MECHANICAL PERFORMANCE Long mating wipe of > mm X and Y capture a generous 1.1mm Mating Force: 0.8N max. per contact Unmating Force: 0.10N min. per contact Ethernet 1Gbe/10Gbe/0Gbe/ 100Gbe/5Gbe TARGET MARKETS/APPLICATIONS Hubs Optical Transport Router Switches Wireless Infrastructure External Storage System Server Supercomputer Emulation Equipment Industrial & Instrumentation Test Equipment 1.5Gb/s to Gb/s Average press-fit Insertion Force: 1N max. per contact
3 EXAMAX TRADITIONAL MOTHER-DAUGHTER BOARD NO GUIDE Columns Differential Vertical Header (VH) No Guide Pin (RAR) LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF Vertical Header LEFT GUIDE Columns Differential Vertical Header (VH) Left Guide Pin (RAR) JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF Vertical Header
4 ExaMAX High Speed Backplane Connector System EXAMAX TRADITIONAL MOTHER-DAUGHTER BOARD RIGHT GUIDE Columns Differential Vertical Header (VH) Right Guide Pin (RAR) JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF Vertical Header EXAMAX COPLANAR NO GUIDE Standard Coplanar Inverse Coplanar No Guide Pin Columns Differential Right Angle Header (RAH) (RAR) LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF Right Angle Header
5 EXAMAX COPLANAR LEFT GUIDE Columns Differential Standard Coplanar Left Guide Pin Right Angle Header (RAH) (RAR) Inverse Coplanar JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF Right Angle Header RIGHT GUIDE Columns Differential Right Guide Pin Right Angle Header (RAH) (RAR) JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF Right Angle Header
6 ExaMAX High Speed Backplane Connector TOOLING INFORMATION Insertion Tool Vertical and Right Angle Header Removal Tool Removal Tool APPLICATION TOOLS FOR RIGHT ANGLE RECEPTACLE WITH mm COLUMN PITCH Columns Differential Insertion Tool Removal Tool Flat Rock, No Tool Flat Rock, No Tool Flat Rock, No Tool Flat Rock, No Tool APPLICATION TOOLS FOR VERTICAL HEADER WITH mm COLUMN PITCH Columns Differential Insertion Tool Removal Tool
7 ExaMAX High Speed Backplane Connector APPLICATION TOOLS FOR RIGHT ANGLE HEADER WITH mm COLUMN PITCH Columns Differential Insertion Tool Removal Tool Flat Rock, No Tool Flat Rock, No Tool Flat Rock, No Tool Flat Rock, No Tool EXAMAX PROTECTIVE CAPS Header Protective Cap Receptacle Protective Cap Protective Caps Columns Differential Header Receptacle HSBPEXAMAX90518EA
EXAMAX HIGH SPEED BACKPLANE CONNECTOR SYSTEM Innovative pinless connector system delivering superior electrical performance at speeds 25 to 56Gb/s
EXAMAX HIGH SPEED BACKPLANE Innovative pinless connector system delivering superior electrical performance at speeds 5 to 5Gb/s SUPPORTS MANY INDUSTRY STANDARD SPECIFICATIONS; MIGRATION PATH TO HIGHER
AirMax POWER CONNECTOR MODULES Part of the AirMax Connector Family
Part of the AirMax Connector Family HIGH PERFORMING AND DURABLE CONNECTORS Hard Metric high power connectors are a perfect complement to AFCI s ExaMAX, AirMax, ZipLine and Millipacs signal connectors.
Millipacs 2mm Hard Metric Connector Selector Guide
Millipacs 2mm Hard Metric Connector Selector Guide Millipacs product family offers 2mm modular Boardto-Board and Cable-to-Board backplane connector solutions. Millipacs product range include low speed
AirMax VSe High Speed Backplane Connector System
AirMax VSe High Speed Backplane Connector System July 2012 FCI Customer Presentation For External Use Where will AirMax VSe connectors be used & Why? More bandwidth density is being demanded from equipment
STRADA WHISPER. Backplane Connector DATA COMMUNICATIONS /// STRADA WHISPER BACKPLANE CONNECTOR
STRADA WHISPER Backplane Connector INTRODUCING STRADA Whisper Backplane Connector Blinding Speeds The STRADA Whisper backplane family was designed with your end customer s need for high-performing, high-bandwidth
Bergstak 0.80mm Pitch Product Presentation
Bergstak 0.80mm Pitch Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals
Xmultiple Technology SFP Products Information
Xmultiple Technology SFP Products Information SFP Products Fiber Channel InfiniBand Ethernet SFP Product Types Optic Modules SFP System Copper HSSDC2 Module HSSDC2 Cable Assemblies PT Connectors SFP History
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
HCI Power Connector System
1 of 28 C Section TABLE OF CONTENTS page no. 1. OBJECTIVE... 1 2. SCOPE... 2 3. DRAWINGS AND APPLICABLE DOCUMENTS... 4 4. GENERAL CUSTOMER INFORMATION... 4 4.1 PRODUCT APPLICATION... 4 4.2 COMPATIBILITY...
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion to
TB Paladin Connector Design Guidelines. Revision A
Paladin Connector Design Guidelines Specification Revision Status Revision SCR No. Description Initial Date A S5664 New Release J.Dunham 4/4/17 Table of Contents Specification Revision Status... 1 1 Introduction...
Mezzanine connectors
Mezzanine connectors MezzSelect : a new brand in the industry 2 MezzSelect : A wide range of mezzanine connectors; An easy to use product selector: Web based; Printed. Why the MezzSelect portfolio? 3 The
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
TCA connectors. ept GmbH & Co. KG I Phone +49 (0) 88 61/ I Fax +49 (0) 88 61/55 07 I I
10 ept GmbH & Co. KG I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de 11 Definitions AdvancedTCA /MicroTCA To give consideration to increasing data traffic and
zsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion
NeXLev Product Specification TB2144
NeXLev Product Specification TB2144 Revision B Specification Revision Status Revision SCR No. Description Initial Date - S0161 New Release DM 4/5/2006 A S1357 Update copper material callout, DM 8/31/09
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion to
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
PRODUCT SPECIFICATION
RECEPTACLE 1.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME
EXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
Vertical Top Entry Card Edge: BTB
AVX continues to develop unique connectors to fill the gap in the industrial market, specifically as it relates to low pin count requirements. The newest addition to AVX s broadening line of one piece
Introducing MULTIGIG RT 2-R. Ruggedized Connectors for VPX Applications
Introducing for VPX Applications High Speed Copper Cables associated VPX SOLUTIONS MEZALOK Mezzanine (Compliant to VITA 61) Utilizes the proven, reliable MIL-55302 Mini-Box contact interface, with four
Dubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
Mini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
APPLICATION SPECIFICATION. 1 of 33 J (r/a header, r/a receptacle, vertical header, vertical receptacle TABLE OF CONTENTS 1. OBJECTIVE...
1 of 33 J Section TABLE OF CONTENTS page no. 1. OBJECTIVE...2 2. SCOPE...2 3. APPLICABLE DOCUMENTS...3 4. GENERAL CUSTOMER INFORMATION...3 4.1. CONNECTOR CONFIGURATIONS...3 4.2. COMPATIBILITY WITH HARD
HSSDC. HSSDC High Speed Serial Data Connection receptacles. HSSDC Receptacle. U45 - A APPLICATIONS ORDERING INFORMATION
HSSDC High Speed Serial Data Connection receptacles meet high-speed differential communication protocols with speeds exceeding 1 Gbps such as IEEE 802.3z and Fibre Channel. This system is designed to conform
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
Advance Concept Release for. Initial Pre-Production Sampling Only. Device Bay Connector System
Advance Concept Release for Initial Pre-Production Sampling Only R Device Bay Connector System Molex Device Bay Interconnection System Simplifying PC & Peripheral Installation and Upgrades Driven by customers
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS 11.12.438 8.83.348 5.72.225 8.83.348 11.12.438 12.70.500 Receiver Contact Part # 610 149 101 38.48 1.515 36.20 1.425 12.70.500 ITA Contact Part # 610 150 101
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z Interconnection Systems) Catalog Revised 8-04
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z s) Catalog 6594 Revised 8-04 High Speed Stacking Connectors (Parallel and Right-ngle Board-to-Board) Stacking Height
zsfp+ (Small Form-factor Pluggable Plus) 25 Gbps Interconnect System
Molex launches the first complete for serial channels, delivering unparalleled signal integrity with superior EMI protection for next-generation Ethernet and Fibre Channel applications Molex s complete
PRODUCT SPECIFICATION
RECEPTACLE.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2. PRODUCT NAME AND
APPLICATION SPECIFICATION. Table of Contents
1 of 37 E Section Table of Contents Page No. 1.0 OBJECTIVE... 2 2.0 SCOPE... 2 3.0 GENERAL... 2 3.1 Product Description and Features... 2 3.2 Product Configurations... 2 3.3 Compatibility with Hard Metric
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
COMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS Section PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE STANDARDS 2.1 Regulatory
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
V.6-17 Colibri for COM Express
V.6-17 Colibri for COM Express 0.5 mm SMT Board-to-Board Connector System Introduction Colibri 0.5 mm SMT for 10+ Gbit/s Applications Connectors for COM Express Key Features: Termination ept s Colibri
Modular Jack Connectors for High-Speed LAN Transmission
NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements
Minitek Pwr 3.0 BMI Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Specifications Features & Benefits Part Numbers Markets & Applications Marcom Collaterals Product Presentation - 2 Value Proposition
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 0.80mm (.031") Pitch Small Form-Factor Pluggable (SFP) Receptacle 74441
PRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
HDMI Product Presentation
HDMI Product Presentation Where does IO-connections stand for? FCI's I/O connector solutions: high-density high-speed interfaces Applications: networking, storage, and memory, power distribution, media
Modular Jack Slimline Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Overview Product Specifications Features & Benefits Markets & Applications Collaterals Product Presentation- 2 Value Proposition Amphenol
Pwr Blade+ Customer Presentation. Daisy Liu. April 2014
Customer Presentation Daisy Liu April 2014 High Performance PwrBlade Connector - Overview Similar to PwrBlade but with an enhanced power contact design for increased linear current density Includes a 48
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
Product Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B
I/O Products. Cable Assemblies High Performance I/O Cable Assemblies...N-92 to N-94
N High Speed Pluggable I/O Solutions Small Form-Factor Pluggable (SFP) Connectors...N-2 to N-3 Cable Assemblies...N-7 to N-8 Tranceiver... N-9 EMI Plug... N-9 Stacked Connectors...N-4 to N-6 SFP+ Cages...
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
ExaMAX HIGH-SPEED BACKPLANE SYSTEMS
ExaMX HIGH-SPEE CKPLNE SYSTEMS ExaMX HIGH-SPEE CKPLNE SYSTEMS ExaMX high-speed backplane systems deliver 28 Gbps of electrical performance while offering an easy migration path to 56 Gbps. choice of 28
PwrMAX High Power Connector System (Preliminary)
1 of 14 5 1.0 OBJECTIVE 2.0 SCOPE This specification defines the performance, test, quality and reliability requirements of the PwrMAX Power Connector System. 3.0 GENERAL This specification is applicable
Minitek Product Presentation
Minitek Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals 2 Value Proposition
Amphenol Amphenol Taiwan Corporation Sheet 1 of 16
Amphenol Amphenol Taiwan Corporation Sheet 1 of 16 Title: USB3.0 Product Specification Part Number: GSB3 Series Description: USB3.0 A&B Type Plug & Receptacle Revisions Control Rev. ECN Number Originator
Product Specification
USB A CONNECTOR 1 of 7 J 1.0 GENERAL This specification defines the performance, tests and quality requirements for the USB A connector. This document is composed of the following sections. 1. General
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
PRODUCT SPECIFICATION TITLE PAGE REVISION
1 of 14 A 1.0 OBJECTIVE This specification defines the performance, test quality and reliability requirement of the Micro Serial-ATA Host and Device connectors. 2.0 SCOPE This specification is applicable
SFP+ Connector and Cages. Product Presentation
SFP+ Connector and Cages Product Presentation SFP+ I/O System SFP+ (Small Form factor Pluggable) Next generation SFP Single (1x) channel 10Gb/s per channel capability SFF- 8431& 8461 Fully qualified I/O
PCI Express Gen 4 & Gen 5 Card Edge Connectors
PCI Express Gen 4 & Gen 5 Card Edge Connectors Product Presentation Amphenol Information Communications ava and Commercial Products Agenda 1. Value Proposition 2. Product Overview 3. Signal Integrity Performance
Product Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
Amphenol. Amphenol. I/O Products. High Speed Interconnects
Amphenol High Speed Interconnects I/O Products Amphenol Now you re Now you re connected connected Amphenol High Speed Interconnects THE COMPANY Amphenol is a global provider of interconnect solutions to
PRODUCT SPECIFICATION
PRODUCT SPECIFITION PAGE: 1 OF 7 REV: A Serial ATA Connector, (22SAPP-X-X) LIST OF REVISION REV PAGE DESCRIPTION ECN. NO. DATE A 01-07 NEW E9201035 01/24/03 PRODUCT SPECIFITION PAGE: 2 OF 7 REV: A Serial
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
Open Ended Card Edge. Series APPLICATIONS FEATURES AND BENEFITS MECHANICAL ELECTRICAL ENVIRONMENTAL HOW TO ORDER
73166 2pc-1pc CS-BTB_66716 Tantalum 4/2/13 8:04 AM Page 80 AVX was challenged with increasing the pin count density as well as minimizing the size of the existing coplanar BTB card edge connector for linear
Stac64 Connection System Unsealed Headers and Receptacles
Modular, stackable connection system offers single- and multi-bay header solutions to maximize design flexibility in unsealed Transportation applications and greatly reduces time-to-market by eliminating
PRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
Product Performance Specification Mini Power Connector
Product Performance Specification Mini Power Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Power Connector and connector system.
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
PCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: Host Socket Recommendations DATE: Updated June 12, 2006 (Initial release April 10, 2006) AFFECTED DOCUMENT: PCI Express Mini Card, Half-Mini Card ECR (Content of
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11 Title: Part Number: Description: RJ-MAG Connector Product Specification RJMG21202XXXXXX RJmag 1 x 2-Port W/ LED Revisions Control Rev. ECN Number Originator
MAXIMUM SOLUTIONS (2/14 -- PR606) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY Fax:
MAXIMUM SOLUTIONS Mill-Max Series 854 Single Row and 855 Double Row Pitch Surface Mount and Through-Hole Spring-Loaded Connectors and Mating Target Connectors Mill-Max has developed high density, (1,27
Published SFF-8784 Rev 0.2
SFF Committee documentation may be purchased in electronic form. SFF specifications are available at ftp://ftp.seagate.com/sff SFF Committee SFF-8784 Specification for 0.8mm Card Edge Drive Connector Rev
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
CRIMPFLEX connectors for flexible circuits
CRIMPFLEX connectors for flexible circuits CRIMPFLEX CONNECTORS Technical data...3 CRIMPFLEX CRIMPING Description...4 MALE SOLDER TABS Solder tabs environment...5 Standard short male solder tab...6 Standard
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
Minitek Pwr 4.2 BMI Product Presentation
BMI Product Presentation Basics Portfolio BMI Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Stacking Height Matrix Markets & Applications Collaterals
Introduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
High Speed I/O Connectors Product Catalog. Now You re Connected International Edition
High Speed I/O Connectors Product Catalog Now You re Connected International Edition ABOUT AHSI For over 80 years, Amphenol has been a premier provider of advanced technology interconnect products to the
Colibri for COM Express. 0.5 mm SMT Board-to-Board Connector System
V. 01/18 for COM Express 0.5 mm SMT Board-to-Board Connector System Singel 3 B-2550 Kontich Belgium Tel. +32 (0)3 458 30 33 info@alcom.be www.alcom.be Rivium 1e straat 52 2909 LE Capelle aan den Ijssel
MAY 15 Rev E
Z-PACK* HS3 and HS3 Plus 6- and10-row Connectors Application Specification 114-13020 05 MAY 15 Rev E NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
ModularJacks. Amphenol Now You re Connected!
ModularJacks Amphenol Now You re Connected! Amphenol The Company Amphenol Commercial Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located
The con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
RJHS Series. RJ vistatm. EMI Quiet Modular Jacks with LED s. Specifications. Ordering Information EMI QUIET - WITH LEDS
EMI Quiet Modular Jacks with LED s is a family of EMI Quiet Modular Jack Connectors with built-in LEDs, meets Ethernet CAT 5 performance. This product is ideal for LAN applications such as adapter cards
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. UHD FEATURES & BENEFITS 0.100 x 0.050 staggered grid - High density optimizes trace routing through the backplane
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma