ModularJacks. Amphenol

Transcription

1 ModularJacks Amphenol

2 Amphenol The Company Amphenol Commercial Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities are dedicated to the design, development, and manufacturing of interconnect products intended for use in the data communications and telecommunications markets. Our expertise in understanding and supporting our customers interconnect needs has earned Amphenol Canada a reputation of quality and excellence among the world s leading users of electronic components. About the Catalogue This modular jack catalogue represents some of our more popular products within this product category. Other product categories include, but is not limited to: D-Sub, Micro-Ribbon, USB, Headers and Sockets, CoolPower connectors, VHDCI, Capacitively Decoupled BNC, filtered connectors (D-Subs and micro-ribbon), and rugged connectors (RJ, USB, D-Subs, and bulkhead adapters). All of our modular jacks are RoHS compliant. All drawings in this document are in inches [mm], unless otherwise indicated. Notice: Specifications are subject to change without notice. Contact your nearest Amphenol sales office for the latest specifications. All statements, information, and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed, or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement, and are not recommended to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Amphenol and RJ vista are registered trademarks.

3 Contents Right Angle (Side Entry) Vertical (Top Entry) RJHS: EMI Quiet with LEDs 3-6 RJHS: EMI Quiet with LEDs 3-6 RJSSE: Surface Mount with Light Pipes 7-9 RJE06: Single Port Slim Profile RJSBE: 1, 2, and 4 Port with LEDs RJE08: Single Port Standard Profile 45 FRJAE: Filtered and Shielded RJE23: Single Port Surface Mount RJCSE: RJ45 Surface Mount with LEDs RJE74: Single Port RJLSE: Surface Mount Ultra Low Profile RJE88: Single Port, Vertical, with LEDs RJESE: RJ45 and RJ11 Standard Profile Stacked RJE01: RJ11 (six position) RJSAE: 2, 4, and 8 Ports with LEDs and Shield Options RJE02: Single Port High Profile 25 RJSNE: 4 over 4 Ports with LEDs and Shield Options RJE03: Single Port Low Profile Category 5e RJE05: Ultra Low Profile RJE48: Right Angled, Low Profile RJE07: Single Port Surface Mount RJE58: Right Angled, Standard Profile RJE09: Standard Profile RJE72: Right Angled, Recessed, Low Profile RJE15: Single Port Low Profile Category 6 RJULE: Recessed, Low Profile RJE71: Right Angled, Recessed, Low Profile RJE56: RJ45 Press Fit RJE45: Single Port, Low Profile RJE73: RJ45 with LEDs Accessories RJE17: RJ45 Coupler LED Options: 69 FRJ-2411: RJ45 Dust Cover* FRJ-2611: RJ11 Dust Cover * *For more information on our dust covers, please visit our website or us at sales@amphenolcanada.com

4 RJHS EMI QUIET WITH LEDS EMI Quiet Modular Jack with LEDs A series of EMI Quiet Modular Jack connectors with built-in LEDs. This product is ideal for LAN applications such as adapter cards and routers. Shielded and non-shielded versions are available, with a variety of LED colours and ports. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: High temperature engineering thermoplastic; Complies with UL 94V-0. Colour: Black. Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ) Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Stainless Steel with tin dipped tails Tin plating on LED tails. Epoxy lens. 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Standard LEDs: Forward Voltage: Reverse Voltage: Luminous Intensity: Low Current LEDs: Forward Voltage Reverse Voltage: Luminous Intensity: Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: CSA File #: For 5.0 V Systems 2.1 Volts typical 6 Volts minimum 0.5mCd minimum (at If = 2mA) For 3.3 V Systems 2 Volts typical 6 Volts minimum 1 mcd minimum (at If = 2mA) 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles 260 C for 5 seconds maximum (connectors without LEDs are suitable for IR reflow) -55 C to + 85 C E LR Ordering Information Series Designation E - Standard series P- PdNi contact plating Version 3 - Vertical mount, 8 position, 30 μ gold plating 5 - Right angle, 8 position, 50μ gold plating 7 - Right angle, 6 position, 50μ gold plating L - Right angle, low rofile, 8 position, 50μ gold plating N - Vertical mount, 8 position, 50μ gold plating RJHS - X X X X X - XX Number of Ports Blank - 1 Port 02-2 Ports 04-4 Ports 06-6 Ports 08-8 Ports LED Options Please refer to page 69 for options. Shield Options 0 - No shield 3 - Shield with top and side tabs (single port has top tabs only) 4 - For single port only: Shield with top and side tabs F - Shielded but with no top, side, or bottom tabs P - Shield with top & bottom tabs, for vertical mount connector Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 3

5 RJHS EMI QUIET WITH LEDS Single Port Non-Shielded RJHSE-508X Shielded - With Top & Side Ground Tabs RJHSE-548X Vertical Mount RJHSE-338X 4

6 RJHS EMI QUIET WITH LEDS Single Port Shielded - Low Profile RJHSE-L38X Multi Port Non-Shielded RJHSE-508X-04 5

7 RJHS EMI QUIET WITH LEDS Multi Port Shielded RJHSE-538X-04 Notes 6

8 RJSSE SURFACE MOUNT WITH LIGHT PIPES Surface Mount with Light Pipes Amphenol Canadas RJSSE series represents an expansion of our current RJHSE series connector. The RJSSE offers all the benefits of the RJHSE series in SMT with light pipes. Shielded and unshielded versions are available with or without light pipes. Speci ications Material Insulator: Contacts: Shield: LED: High temperature engineering thermoplastic; Complies with UL 94V-0, Black color Phosphor Bronze hard temper selective plated gold. Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Copper alloy; nickel or matte tin plating Optical grade polycarbonate; complies with Electrical Contact Resistance: 20 mω maximum Insulation Resistance: 500 MΩ minimum at 500V DC for 2 mins. max. Current Rating: Voltage Rating: DWV: 1.5 Amps 125 Volts AC 1500 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles IR Reflow peaked at 260 C for 5 to 8 seconds (Light Pipes to be installed after soldering) -55 C to + 85 C E Ordering Information RJSSE - X X X X Version 5-8 posi on, 20μ gold pla ng 7-6 posi on, 20μ gold pla ng Shield Op ons 0 - No shield with -hold down bracket 3 - Shield with tabs on top 5 - Shield with fla ened bo om tab F - Shield without tabs and boardlock N - No shield, no hold down bracket S - Shield with straight PCB Number of Contacts 4-4 contacts 6-6 contacts 8-8 contacts X - X Packaging Blank - Tray T - Tape & Reel Number of Ports Blank - 1 port 02-2 ports 04-4 ports Light Pipe Op ons 0 - Blocked 1 - With light pipe 2 - Without light pipe, not blocked The light pipes are available to be purchased on their own. Part number: RJSSE Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 7

9 RJSSE SURFACE MOUNT WITH LIGHT PIPES Single Port Non-Shielded RJSSE-5080 Standard Shield - With Top & Side Ground Tabs RJSSE

10 RJSSE SURFACE MOUNT WITH LIGHT PIPES Multi Port Non-Shielded RJSSE Multi Port Shielded RJSSE

11 RJSBE 1, 2, AND 4 PORT WITH LEDS 1, 2, and 4 Port with LEDs The RJSBE series of modular jacks supports Ethernet Protocols. Shielding available with or without a ferrite filter for increased EMI performance and LEDs for link activity and network speed verification. Speci ications Material Insulator: Contacts: Shield: LED: Electrical High temperature engineering thermoplastic; Complies with UL 94V-0, Black colour Phosphor bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ) Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tails Tin plating on LED tails. Epoxy lens. Contact Resistance: 20 mω maximum Insulation Resistance: 500 MΩ minimum at 500V DC for 2 mins. max. Current Rating: 1.5 Amps Voltage Rating: 125 Volts AC DWV: 1000 VAC, 60 Hz. 1 minute LED Forward DC Current: 20 ma typical LED Forward Voltage: 1.9 Volts maximum (at If = 2mA) for single colors 2.6 Volts maximum (at If = 2mA) for bi-colors LED Reverse Voltage: LED Light Intensity: LED Wave Length: Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: CSA File #: 5 Volts minimum 0.4 to 1.5 mcd minimum (at If = 2mA) for single colors 0.5 mcd minimum (at If = 2mA) for bi-colors Yellow: 587 ± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles Wave soldering peacked at 260 C for 5 seconds maximum (connectors without LEDs are suitable for IR reflow) -55 C to + 85 C E LR Ordering Information Version 5-8 position, 50 μ gold plating 7-6 position, 50 μ gold plating D - 8 position, 6 μ gold plating G - 8 position, 15 μ gold plating J - 8 position, 30 μ gold plating Shield Options 0 - No shield 2 - Shield with top and side tabs, filtered 3 - Shield with top and side tabs, no filter F - Shield with no tabs, no filter RJSBE - X X X X - C X Number of Ports 1-1 Port 2-2 Ports 4-4 Ports LED Options Please refer to page 69 for options Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 10

12 RJSBE 1, 2, AND 4 PORT WITH LEDS Single Port Non-Shielded RJSBE-508X-C1 Shielded RJSBE-538X-C1 11

13 RJSBE 1, 2, AND 4 PORT WITH LEDS Multi Port Non-Shielded RJSBE-508X-C4 Multi Port Shielded RJSBE-538X-C4 12

14 FRJAE FILTERED AND SHIELDED Filtered and Shielded The FRJAE series of shielded and filtered modular jacks offer low cost and effective EMC control within standard RJ11 and RJ45 connector footprints. EMC control is offered by a completely shielded connector and/or with the use of a high resistivity, high impendance ferrite block. No board layout changes are required for its use. Simply replace the standard non-filtered connector for superior EMC performance. Speci ications Material Insulator: Contacts: Shield: Filter: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: High temperature engineering thermoplastic; Complies with UL 94V-0, Black color Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ) Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tail High impedance, high resistivity ferrite block 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: 5 lbs. maximum Mating Connector Pull Retention Force: 20 lbs. minimum Durability: 750 mating and unmating cycles Recommended Soldering IR Reflow peaked at 260 C Temperature: for 5 to 8 seconds (not recommended for connectors with LEDs) Operating Temperature: -55 C to + 85 C UL File #: CSA File #: Impedance Characteristics E LR68598 Ordering Information Version 4-8 position 6-6 position Shield Options 0 - Non-filtered with no shield 1 - Filtered with front tab shield 3 - Non-filtered with front tab shield 4 - Filtered with no shield 6 - Filtered with read tab shield 7 - Filtered with non-tab shield 8 - Non-filtered with rear tab shield FRJAE - X X X - XX Number of Ports Blank - 1 Port 02-2 Ports 04-4 Ports 06-6 Ports 08-8 Ports Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 13

15 FRJAE FILTERED AND SHIELDED Single Port Non-Shielded FRJAE-A408 Shielded FRJAE-438 Multi Port Non-Shielded FRJAE-4X8-0X Number of Ports A [30.48] [58.42] [86.36] [114.30] C [25.40] [53.34] [81.28] [109.22} 14

16 FRJAE FILTERED AND SHIELDED Multi Port Shielded FRJAE-418-0X Notes 15

17 RJCSE RJ45 SURFACE MOUNT WITH LEDS RJ45 Surface Mount with LEDs The RJCSE is a right angle surface mount connector with built-in LEDs, available with or without shielding. Shielding available for increased EMI performance and built-in LEDs for link activity and network verification. This product is ideal for LAN applications such as adapter cards and routers. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: LED Forward DC Current: LED Forward Voltage: High temperature engineering thermoplastic; Complies with UL 94V-0, Black color Phosphor Bronze hard temper with gold thickness options (15μ, 50μ ) Over 50μ minimum nickel on contact mating area, Gold flash over nickel on soldering tail Copper alloy with nickel plating Tin plating on LED tails. Epoxy lens. 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute 20 ma typical 1.9 Volts maximum (at If = 2mA) for single colors 1.6 Volts maximum (at If = 2mA) for bi-colors LED Reverse Voltage: LED Light Intensity: LED Wave Length: Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: CSA File #: 5 Volts minimum 0.4 to 1.5 mcd minimum (at If = 2mA) for single colors 0.5 mcd minimum (at If = 2mA) for bi-colors Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles 260 C for 5 seconds maximum (connectors without LEDs are suitable for IR reflow) -55 C to + 85 C E LR Ordering Information Version 3-8 position, 15 μ gold plating 4-8 position, 30 μ gold plating 5-8 position, 50 μ gold plating Shield Options 0 - No shield 3 - Standard shield with panel tabs Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. RJCSE - X X X X - 01 Number of Ports 01-1 Port LED Options Please refer to page 69 for options Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts 16

18 RJCSE RJ45 SURFACE MOUNT WITH LEDS Single Port Non-Shielded RJCSE-508X-01 Shielded RJCSE-538X-01 Notes 17

19 RJLSE SURFACE MOUNT ULTRA LOW PROFILE Surface Mount Ultra Low Pro ile The RJLSE series are surface mount modular jacks with superior EMI performance that support Ethernet Protocols. This low profile connector is built to meet your high volume RJ requirements. This series is a true pick and place compatible SMT connector and is available with different shielding, number of contacts, gold plating thickness, and colour options. Built with high temperature engineering thermoplastic and suitable for IR reflow solder process. Speci ications Material Insulator: Contacts: Plating: Shield: Coplanarity: High temperature engineering thermoplastic; Complies with UL 94V-0, Available: black, yellow, red Phosphor Bronze Gold plating on mating surfaces over 50μ (1.27 microns) minimum nickel underplate. 100μ (2.54 microns) minimum matte tin on contact tails. Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Copper alloy; nickel or matte tin plated Maximum gap between all terminal tails is Mechanical Mating Connector Insertion Force: Mating Connector Retention Pull: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: CSA File #: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles 260 C for 5 seconds maximum (connectors without LEDs are suitable for IR reflow) -55 C to + 85 C E LR mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Ordering Information Version 4-8 position 6-6 position Contact Plating 1-15 μ gold plating 2-30 μ gold plating 3-50 μ gold plating Shield Options 0 - No shield 1 - Standard shield, no tabs 3 - Shield with PCB tabs RJLSE - X X X X X - 01 X Packaging Blank - Tray T - Tape & Reel Number of Ports 01-1 Port Housing Options 1 - Black 2 - Yellow 3 - Red Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 18

20 RJLSE SURFACE MOUNT ULTRA LOW PROFILE Single Port Non-Shielded RJLSE-6X Shielded RJLSE-4X

21 RJESE RJ45 AND RJ11 STANDARD PROFILE RJ45 and RJ11 Standard Pro ile The family of EMI quiet modular jack connectors with integrated LEDs, features the same data transfer capabilities as our existing series of LED-integrated modular jacks. This product is an economical solution ideal for LAN applications and is intended for use with low temperature soldering processes. Shielded and non-shielded versions are available with a variety of LED options to choose from. RJESE is offered in both single and multi-port configurations. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: LED Forward DC Current: High temperature engineering thermoplastic; Complies with UL 94V-0, Black color Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ) Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Stainless steel with tin dipped tails Tin plating on LED tails Ordering Information 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute 20 ma typical LED Forward Voltage: LED Reverse Voltage: LED Light Intensity: LED Wave Length: Mechanical Mating Connector Insertion Force: Mating Connector Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: 1.9 Volts maximum (at If=2mA) for single colors 2.6 Vols maximum (at If = 2mA) for bi-colors 5 Volts minimum 0.4 to 1.5 mcd minimum (at If = 2mA) for single colors 0.5 mcd minimum (at If = 2mA) for bi-colors Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles 260 C for 5 seconds maximum (connectors without LEDs are suitable for IR reflow) -55 C to + 85 C Version 3 - Vertical mount, 8 positions, with panel stops 7 - Right angled, 6 position 8 - Right angled, 8 position RJESE - X X X X - X Shield Options 0 - No shield 1 - Standard shield, 1 to 8 port (single port without side tabs) 4 - One port shield top tabs with side tabs Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts X XX Special Identifier Blank - Standard black housing 02 - Housing color: yellow #114C 03 - Housing color: red Number of Ports 1-1 Port 2-2 Ports 4-4 Ports Contact Plating 0-6 μ gold plating 1-15 μ gold plating 2-30 μ gold plating 3-50 μ gold plating LED Options Please refer to page 69 for options Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 20

22 RJESE RJ45 AND RJ11 STANDARD PROFILE Single Port Non-Shielded RJESE-808X-X1 Shielded RJESE-848X-X1 21

23 RJESE RJ45 AND RJ11 STANDARD PROFILE Multi Port Non-Shielded RJESE-808X-X4 Multi Port Shielded RJESE-838X-X4 22

24 RJE01 RJ11 (SIX POSITION) RJ11 (Six Position) The RJE01 series of 6-position jacks are designed for superior EMI performance. The inverted connector provides shorter leads, eliminating the EMI antenna effect of the standard connector footprint. Typical performance improvement over their standard connector counterparts is 5-10 db over the frequency range. Speci ications Material Insulator: Contacts: Shield: High temperature engineering thermoplastic; Complies with UL 94V-0, Black colour Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ) Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Stainless Steel with tin dipped tails Mechanical Mating Connector Insertion Force: Mating Connector Retention Force: Durability: Recommended Soldering Operating Temperature: UL File #: CSA File #: 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles 260 C for 5 seconds maximum -55 C to + 85 C E LR Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 125 Volts AC 1000 VAC, 60 Hz. 1 minute Ordering Information Contact Plating 1-6 μ gold plating 6-50 μ gold plating G - 15 μ gold plating J- 30 μ gold plating Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts RJE01 - X X X - XX Number of Ports 01-1 Port 02-2 Ports Shield Options 0 - No shield 1 - Front/rear tab captions for single port 2 - Shielded with side, and with PCB tails 4 - Shielded without tabs, and without PCB tails 5 - Shielded without tabs, but with shield PCB tails Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 23

25 RJE01 RJ11 (SIX POSITION) Single Port Non-Shielded RJE01-X60-01 Shielded RJE01-X62-01 Multi Port Non-Shielded RJE01-X60-02 Shielded RJE01-X

26 RJE02 SINGLE PORT HIGH PROFILE Single Port, High Pro ile RJE02 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications options within the RJE02 family include options with and without a panel stops, and RJ11 and RJ45 configurations. Speci ications Material Insulator: Contacts: Shield: High temperature engineering thermoplastic. Complies with UL 94V-0, Black. Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ) Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Copper allow, nickel plated with tin dipped tail Mechanical Mating Connector Insertion Force: 5 lbs. maximum Mating Connector Retention Force: 20 lbs. minimum Durability: 750 mating and unmating cycles Recommended Soldering 260 C for 5 seconds maximum Temperature: Operating Temperature: -40 C to + 85 C Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Ordering Information Single Port Non-Shielded Number of Ports 1-1 Port Number of Positions 6-6 Positions 8-8 Positions Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Shield Options 0 - No shield RJE02-1 XX 0 X X 0-0 Modifier 1 - Standard Product Panel Stop Options 1- Without panel stop 2 - With panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. RJE02-1XX-0X20 Part Number No. of No. of Dimensions Quantity Quantity Positions Contacts A B C D E per tray per carton RJE X RJE X RJE X RJE X RJE X RJE X

27 RJE03 SINGLE PORT LOW PROFILE Single Port, Low Pro ile RE03 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications. Options within the RJE03 family include shielded and non-shielded, and RJ11 & RJ45 configurations. Speci ications Material Insulator: Contacts: Shield: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: High temperature engineering thermoplastic; Complies with UL 94V-0, Black color Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ) Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tail 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mavting Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles 260 C for 5 seconds maximum -40 C to + 85 C Ordering Information Number of Ports 1-1 Port Number of Positions 6-6 Positions 8-8 Positions Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts RJE03-1 X X - X X X 0 Modifier 0 - Standard Product Panel Stop Options 1- Without panel stop 2 - With panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Shield Options 0 - No shield 2 - Partial shield (must have panel stop) Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 26

28 RJE03 SINGLE PORT LOW PROFILE Single Port Non - Shielded RJE X10 Shielded with Panel Stop RJE X20 Notes 27

29 RJE05 ULTRA LOW PROFILE Ultra Low Pro ile RJE05 series is a group of products within a family of standard modular jacks designed to meet requirments for a variety of applications. Options within the RJE05 family include shielded or non-shielded, and RJ11 & RJ45 configurations. Speci ications Material Insulator: Contacts: Shield: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: Engineering thermoplastic. Complies with UL 94V-0. Colour: Black Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ) Over 50μ minimum nickel on contact mating area, 100μ minimum matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tail 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles Wave soldering peaked at 260 C for 5 seconds maximum (connectors made with high temperature materials are suitable for IR review) -40 C to + 85 C E Ordering Information Number of Ports 1-1 port Number of Positions 4-4 positions 6-6 positions 8-8 positions A - 10 positions Number of Contacts 2-2 contacts 4-4 contacts 6-6 contacts 8-8 contacts A - 10 contacts 1 RJE05 - X X- X 1 0 X X Modifier 0 - Standard product Panel Stop Options 1 - No panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Shield Options 0 - No shield 1 - Shield Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 28

30 RJE05 ULTRA LOW PROFILE Single Port Non - Shielded RJE X10 Shielded RJE X10 Notes 29

31 RJE07 SINGLE PORT SURFACE MOUNT Single Port Surface Mount RJE07 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications. Options within The FRJAE series of shielded and filtered modular jacks offer low cost and effective EMC control within standard RJ11 and RJ45 connector footprints. EMC control is offered by a completely shielded connector and/or with the use of a high resistivity, high impendance ferrite block. No board layout changes are required for its use. Simply replace the standard non-filtered connector for superior EMC performance. Speci ications Material Insulator: Contacts: Shield: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: High temperature thermoplastic. Complies with UL 94V-0. Colour: Black Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tail. 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles Reflow soldering at 260 C for 6 to 8 seconds maximum -40 C to + 85 C Ordering Information Number of Ports 1-1 Port Number of Positions 6-6 positions 8-8 positions Number of Contacts 4-4 contacts 6-6 contacts 8-8 contacts Shield Options 0 - No shield 2 - Through-hole shield 3 - Surface-mount shield RJE07-1 X X - X X X 0 Modifier 0 - Standard product X01 Panel Stop Options 1 - Without panel stop 2 -With panel stop (must have panel stop for shield option) Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 30

32 RJE07 SINGLE PORT SURFACE MOUNT Single Port Non-Shielded RJE X10 Surface-Mount Shield RJE X20 Through-Hole Shield RJE X20 31

33 RJE09 STANDARD PROFILE Standard Pro ile RJE09 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications. Options with the RJE09 family include shielded & non-shielded, and RJ11 & RJ45 configurations. Speci ications Material Insulator: Contacts: Shield: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: Engineering thermoplastic. Complies with UV 94V-0. Colour: Black Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin or gold flash plating on tail area. Copper alloy; nickel plating over all. 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles Wave soldering at 260 C for 5-8 seconds maximum -40 C to + 85 C E Ordering Information Number of Ports 1-1 Port 2-2 Ports 4-4 Ports 6-6 Ports 8-8 Ports Number of Positions 6-6 Positions 8-8 Positions A - 10 Positions Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts A - 10 Contacts RJE09 - X X X - X X 1 0 Modifier 0 - Standard Product Panel Stop Options 1 - No panel stop 2 - With panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Shield Options 0 - No shield 1 - Standard shield, no tabs 5 - Shield with top and side tabs Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 32

34 RJE09 STANDARD PROFILE Single Port Non-Shielded RJE09-1AA-0X10 Shielded RJE X10 Shielded *This drawing is in millimeteres [inches] RJE X10 33

35 RJE09 STANDARD PROFILE Multi Port Non-Shielded RJE X10 Shielded *This drawing is in millimeteres [inches] RJE X10 Notes 34

36 RJE15 SINGLE PORT LOW PROFILE Single Port, Low Pro ile The RJE15 low profile connector is built to meet your high volume RJ requirements. This is a true pick and place compatible SMT connector and is available with or without shielding, and a variety of options including number of contacts, plating thickness, and colour. Built within high temperature engineering thermoplastic and suitable for IR reflow solder process. Speci ications Material Insulator: Contacts: Shield: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: High temp.thermoplastic. Complies with UL 94V-0. Colour: Black Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin or gold flash plating on tail area. Copper alloy; nickel plating over all. 25 mω maximum 1000 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles IR Reflow peaked at 260 C for 5-8 seconds maximum. -40 C to + 70 C Ordering Information Number of Ports 1-1 Port Number of Positions 4-4 Positions 6-6 Positions 8-8 Positions A - 10 Positions Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts A - 10 Contacts X 0 RJE15-1 X X - X 1 Modifier 0 - Standard Product Panel Stop Options 1- No panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Shield Options 0 - No shield 1 - Standard shield, no tabs 5 - Shield with top and side tabs Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 35

37 RJE15 SINGLE PORT LOW PROFILE Single Port Non-Shielded RJE15-1AA-0X10 Shielded RJE15-1AA-1X10 Notes 36

38 RJULE RECESSED, LOW PROFILE Recessed, Low Pro ile The RJULE is a series of single port RJ45 modular jacks designed for slim profile applications. With a profile height of less than 10 millimeters, this connector is perfect where vertical space is limited. Standard and rear mount shield options for superior EMI performance makes this part ideal for LAN and router applications. Speci ications Material Housing: Contacts: Plating Shield: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: High temperature engineering thermoplastic; flammability rating UL 94V-0 Phosphor Bronze Gold plated on mating surfaces over 50μ (1.27 microns) minimum nickel under-plate. Copper alloy; nickel plated with tin dipped tail 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability Recommended Soldering Temperature: Operating Temperature UL File #: 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles IR Reflow peaked at 260 C for 5 to 8 seconds maximum. -55 C to + 85 C E Ordering Information Number of Positions 4-8 positions Contact Plating μ gold plating 1-15 μ gold plating 2-30 μ gold plating 3-50 μ gold plating Housing Options 1 - Black 2 - Yellow 3 - Red Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts 4 X 01 X RJULE - X X X - Packaging Blank - Tray T - Tape & Reel Number of Ports 01-1 Port Shield Options 0 - No Shield 1 - Standard Shield 2 - Shield with side ground tabs design to touch with mounting panel 3 - Shield with ground tab Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 37

39 RJULE RECESSED, LOW PROFILE Single Port Non-Shielded *All drawings are measured in millimeters[inches]. RJULE-4X Shielded with Side Ground Tabs RJULE-4X Single Port Standard Shield RJULE-4X

40 RJE56 RJ45 PRESS FIT RJ45 Press Fit The RJE56 series is designed for applications where soldering is not an option. The press fit contacts and shield tabs have the eye of the needle design and provide good PCB retention as well as reliable electrical performance. Speci ications Material Housing: Contacts: Shield: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: High temperature thermoplastic; complies with UL 94V-0. Colour Black. Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum tin lead plating on press fit tail. Stainless Steel 20 mω maximum 500 MΩ minimum 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability Recommended Soldering Temperature: Operating Temperature: 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles IR Reflow peaked at 260 C for 5 to 8 seconds maximum. -55 C to + 85 C Ordering Information Number of Ports 1-1 Port Number of Positions 8-8 Position Number of Contacts 6-6 Contacts 8-8 Contacts Shield Options 0 - No shield 1 - Full Shield RJE X - X X Packaging Blank - Tray T - Tape & Reel X01 X Modifier 0 - Standard product Panel Stop Options 1- No panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 39

41 RJE56 RJ45 PRESS FIT Single Port Shielded RJE X10 * This drawing is in millimeters[inches] Notes 40

42 RJE73 RJ45 LOW PROFILE WITH LEDS RJ45 Low Pro ile with LEDs The RJE73 modular jack is a low profile RJ45 with LEDs and superior EMI shielding with a small footprint for space sensitive designs. Built-in LEDs provide link activity and network verification. This product is ideal for LAN applications such as adapter cards and routers. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: LED Forward DC Current: LED Forward Voltage: High temperature thermoplastic; complies LED Reverse Voltage: with UL 94V-0, Colour: Black LED Light Intensity: Phosphor Bronze hard temper with gold plating options 50μ minimum nickel on contact mating area 100μ minimum matte tin LED Wave Length: on solder tails. Stainless steal on tin dipped tails. Tin plating on LED tails. Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force Durability: 20 mω maximum Recommended Soldering Temperature: 500 MΩ minimum at 500V DC for 2 mins. max. 1.0 Amps 125 Volts AC Operating Temperature: 1000 VAC, 60 Hz. 1 minute UL File #: 20 ma typical 1.9 Volts (for single 5 Volts minimum 0.4 to 1.5 mcd (for single colours) 0.5 mcd (for Bi-colours) Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles Wave soldering peaked at 245 C for 8-10 seconds maximum -55 C to + 85 C E Ordering Information Number of Ports 1-1 Port Number of Positions 8-8 Positions Number of Contacts 8-8 Contacts RJE X X X Shield Options 0 - Without tabs 1 - With side and top tabs X01 LED Options Please refer to page 69 for options Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 41

43 RJE73 RJ45 LOW PROFILE WITH LEDS Single Port Shielded - Option 0 * All drawings are measured in millimeters[inches] RJE XX1 Shielded - Option 1 RJE XX0 42

44 RJE06 SINGLE PORT SLIM PROFILE Single Port Slim Pro ile RJE06 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications. Options within the RJE06 family include shielded & non-shielded, and 8p8C configurations. Speci ications Material Insulator: Contacts: Shield: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: Engineering thermoplastic. Complies with UL 94V-0. Colour Black. Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum tin or gold flash plating on tail area. Copper alloy; nickel plating over all. 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles Wave soldering peaked at 260 C for 5 seconds maximum. Connectors made with high temperature material are suitable for IR reflow -40 C to + 70 C E Ordering Information Number of Ports 1-1 port Number of Positions 6-6 positions 8-8 positions Number of Contacts 6-6 contacts 8-8 contacts Shield Options 0 - No shield 1 - Standard shield RJE06 - X - X X X X 1 X Modifier 0 - Standard tail length (3.25mm) 1-4.0mm tail length Panel Stop Options 1 - Without panel stop 2 - With panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 43

45 RJE06 SINGLE PORT SLIM PROFILE Single Port Non-Shielded RJE X10 Non-Shielded RJE X10 Standard Shield RJE X10 44

46 RJE08 SINGLE PORT STANDARD PROFILE Single Port Standard Pro ile RJE08 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications. Options within the RJE08 include with and without panel stops, and RJ11 and RJ45 configurations. Speci ications Material Insulator: Contacts: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: Ordering Information Number of Positions 4-4 positions 6-6 positions 8-8 positions A- 10 positions Number of Contacts 4-4 contacts 6-6 contacts 8-8 contacts A - 10 contacts Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. Single Port Non-Shielded *This drawing is in millimeters[inches] Engineering thermoplastic. Complies with UL 94V-0. Colour: Black. Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin or gold flash plating on tail area. 25 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Number of Ports 1-1 port Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: RJE08-1 X X - 0 X X 0 Modifier 0 - Standard product Panel Stop Options 1 - Without panel stop 2 - With panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Shield Options 0 - No shield 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles Wave soldering peaked at 260 C for 5 seconds maximum. -40 C to + 70 C E RJE X10 45

47 RJE23 SINGLE PORT SURFACE MOUNT Single Port Surface Mount The RJE23 series is designed for high volume production where a vertical modular jack is required. Shielding provides increased EMI performance. Surface mount contacts and hold-down nail bracket assist in speeding up the production process. Speci ications Material Insulator: Contacts: Shield: Hold Down: Coplanarity: Electrical Contact Resistance: Insulation Resistance: Current Rating: High temperature thermoplastic. Complies with UL 94V-0, Black. Phosphor Bronze hard temper with gold thickness options (6μ,15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area.100μ minimum matte tin over nickel on soldering tail. Copper alloy, matte tin plating Copper alloy, matte tin plating Maximum gap between all terminal tails is mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps Voltage Rating: DWV: Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature 125 Volts AC 1000 VAC, 60 Hz. 1 minute 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles IR Reflow peaked at 260 C for 5-8 seconds maximum. -55 C to +83 C Ordering Information Number of Ports 1-1 port RJE23 Number of Positions 6-6 positions 8-8 positions Number of Contacts 6-6 contacts 8-8 contacts Shield Options 0 - No shield 1 - Standard shield, no tabs - 1 X X - X X X 0 - X 01 Packaging Blank - Standard (Tray) T - Tape & Reel Modifier 0 - Type 1: 4 hole hold-down bracket 3 - Standard with 2 hole hold-down bracket & kapton tape 4 - Standard with 2 hole hold-down bracket 8 - Type 2: 2 hole hold down bracket Housing/Panel Stop Option 1 - Black housing/without panel stop 2 - Black housing/with panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 46

48 RJE23 SINGLE PORT SURFACE MOUNT Single Port Non-Shielded * This drawing is in millimeters[inches]. RJE X10 Non-Shielded * This drawing is in millimeters[inches]. RJE X20 Notes 47

49 RJE74 SINGLE PORT Single Port Surface Mount The RJE74 series, with superior EMI shielding, is built to fit your modular jack requirements. The vertical 10P10C version is available with an RMK4 key interface to prevent an 8P8C plug from entering and damaging the connector. Includes optional mylar cover for automated assembly equipment. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: High temperature thermoplastic. Complies with UL 94V-0. Colour: Black. Phosphor Bronze hard temper with 30μ minimum gold thickness over 50μ minimum nickel on contact mating area. 100μ minimum matte tin plating on soldering tail. Stainless steel; pure tin dipped tails Tin plating on LED tails 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Ordering Information Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles IR Reflow peaked at 260 C for 5 seconds maximum. -55 C to + 85 C E Number of Ports 1-1 port Number of Positions 8-8 positions A - 10 positions Number of Contacts 8-8 contacts A - 10 contacts Shield Options 0 - No shield 1 - Full shield RJE74-1 X X - X X 1 X - X Options Blank - PBT, tray, w/o Mylar A - High temp housing, tray w/o Mylar H - High temp housing, Tape & Reel, with Mylar Modifier 0 - Standard product 1 - With RMK4 keying Panel Stop Option 1 - No panel stop Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 48

50 RJE74 SINGLE PORT *All drawings on this page are in millimeters [inches]. Single Port Non-Shielded with Keying RJE74-1AA-0X11 Non - Shielded RJE74-1AA-0X10 Shielded with Keying RJE74-1AA-1X11 49

51 RJE88 SINGLE PORT, VERTICAL, WITH LEDS Right Angled, Recessed, Low Pro ile Vertical through-hole (THT) in single port RJ45 configurations with full shield or superior EMI protection. A variety of LED options for link-activity and network verification are available. Made with high temperature composite and when accompanied with our high temperature resistant LEDs, these connectors are well suited for the IR reflow process. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: LED Forward DC Current: LED Forward Voltage: High temperature thermoplastic. Complies with UL 94V-0. Colour: Black. Phosphor Bronze hard temper with gold thickness option (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin on solder tail. Stainless steel with tin dipped tails. Tin plating on LED tails. Ordering Information 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute 2.6 Volts (for Bi-colours) 20mA typical 1.9 Volts (for single colours) Number of Ports 1-1 port Number of Positions 8-8 positions Number of Contacts 8-8 contacts Shield Options 0 - No shield 1 - Shield with PCB tabs, but no top and bottom tabs 2 - Shield with PCB tabs and top and bottom tabs LED Reverse Voltage: LED Light Intensity: LED Wave Length: Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: RJE X X X X - T Packaging Blank - Tray T - Tape & Reel Modifier 0 - Tail length = 2.7mm (0.11 ) A - Tail length = 3.5mm (0.14 ) LED Options Please refer t page 69 for options Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating 5 Volts minimum 0.4 to 1.5 (for single colors) 0.5 mcd (for Bi-colours) Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles Wave soldering peaked at 260 C for 5 seconds maximum. -55 C to + 85 C 50

52 RJE88 SINGLE PORT, VERTICAL, WITH LEDS Single Port Shielded *This drawing is in millimeters[inches]. RJE XXX Notes 51

53 RJSAE 2, 4, AND 8 PORTS WITH LEDS AND SHIELD OPTIONS 2, 4, and 8 Ports with LEDs and Shield Options The RJSAE is a RJ45 stackable connector that reduces component and labour costs by incorporating LEDs into the connector. Its stackable feature enables more ports with the same board space. With superior EMI performance, the option of configuring your connector with a ferrite filter is available to further reduce crosstalk in noisy applications. Amphenol offers a variety of other options such as shielded and unshielded and a variety of LED combinations and port configurations. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: LED Forward DC Current: LED Forward Voltage: Ordering Information High temperature thermoplastic; with UL 94V-0. Colour: Black Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin plating on soldering tail. Copper alloy; nickel plated with pure in dipped tail. Pure tin plating on LED tail 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute 20 ma typical 1.9 Volts (for single colors) 2.6 Volts (for bi-colors) Versions 5-8 positions, 50 μ gold plating 7-6 positions, 50 μ gold plating 8-8 positions over 6, 50 μ gold plating Shield Options 0 - No shield 2 - Shield with top and side tabs, with filter 3 - Shield with top and side tabs, no filter F - Shield without top and side tabs Number of Contacts 4-4 contacts 6-6 contacts 8-8 contacts LED Reverse Voltage: LED Light Intensity: LED Wave Length: Mechanical Mating Connector Insertion Force: C Durability: Recommended Soldering Temperature: Operating UL File #: Temperature: CSA File #: RJSAE - X X XXX - X X Number of Ports 2-2 ports (1 over 1) 4-4 ports (2 over 2) 8-8 ports (4 over 4) Contact Length 0 - Standard 0.1 (2.54mm) A (3.30mm) B (3.51mm) LED Options Please refer to page 69 for options 5 Volts minimum 0.4 to 1.5 mcd (for single colors) 0.5 mcd (for bi-colors) Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles Wave soldering peaked at 260 C for 5 seconds maximum (connectors without LEDs are suitable for IR reflow) -55 C to + 85 C E

54 RJSAE 2, 4, AND 8 PORTS WITH LEDS AND SHIELD OPTIONS Single Port Non-Shielded RJSAE-508X-02 Shielded RJSAE-538X-02 Multi Port Non-Shielded RJSAE-508X-08 53

55 RJSAE SERIES RJSAE 2, 4, AND 8 PORTS WITH LEDS AND SHIELD OPTIONS Multi Port Non-Shielded RJSAE-508X-08 Shielded RJSAE-538X-08 54

56 RJSNE 4 OVER 4 PORTS WITH LED AND SHIELD OPTIONS 4 Over 4 Ports with LED and Shield Options The RJSNE series is a stacked onnector that offers LED options for link activity and network verification. It is available with or without shielding. The RJSNE series also includes a unique inner shield device to reduce the crosstalk between top and bottom ports. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: LED Forward DC Current: LED Forward Voltage: Ordering Information High temperature thermoplastic; with UL 94V-0. Colour: Black Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin plating on soldering tail. Copper alloy; nickel plated with pure in dipped tail. Pure tin plating on LED tail 20 mω maximum 500 mω minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute 20 ma typical 1.9 Volts (for single colors) 2.6 Volts (for bi-colors) Version 5-8 positions, 50 μ gold plating D - 8 positions, 6 μ gold plating G - 8 positions 15μ gold plating J - 8 positions, 30μ gold plating Shield Options 0 - No shield 3 - Shield with top and side tabs F - Shield without top and side tabs Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts LED Reverse Voltage: LED Light Intensity: LED Wave Length: Mechanical RJSNE - X X X X - X 8 Mating Connector Insertion Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: CSA File #: Number of Ports 8-8 Ports (4 over 4) Contact Length 0 - Standard 0.1 (2.54mm) A (3.30mm) LED Options Refer to page 69 for options 5 Volts minimum 0.4 to 1.5 mcd (for single colors) 0.5 mcd (for bi-colors) Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating and unmating cycles Wave soldering peaked at 260 C for 5 seconds maximum (connectors without LEDs are suitable for IR reflow) -40 C to + 85 C E

57 RJSNE 4 OVER 4 PORTS WITH LED AND SHIELD OPTIONS Single Port Non-Shielded RJSNE-538X-X8 Notes 56

58 RJE48 CAT 5e, RIGHT ANGLED, LOW PROFILE Right Angled, Low Pro ile The RJE48 series of modular jacks meet CAT5e performance per EIA-568-C.2. It supports Gigabit Ethernet Protocols. Shielding available for increased EMI performance and LEDs for link activity and network verification. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: LED Forward DC Current: LED Forward Voltage: High temperature thermoplastic. Complies with UL 94V-0. LED Reverse Voltage: Colour: Black. LED Light Intensity: Phosphor Bronze hard temper with gold thickness option (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. LED Wave Length: Stainless steel with tin dipped tails. Tin plating on LED tails. 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute 20mA typical 1.9 Volts (for single colours) 2.6 Volts maximum@20ma (for Bi-colours) Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: 5 Volts minimum 0.4 to 1.5 (for single colors) 0.5 mcd (for bi-colours) Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles Wave soldering peaked at 260 C for 5 seconds maximum. -55 C to + 85 C Ordering Information Number of Ports 1-1 Port 2-2 Port 4-4 Port Number of Positions 4-4 Positions 6-6 Positions 8-8 Positions Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts RJE48 - X XX-XXX X - X Packaging Blank - Tray T - Tape & Reel Modifier tail length LED Options Refer to page 69 for options Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Shield Options 0 - No Shield 1 - Full Shield 2 - Special shield with SMT solder tabs 57

59 RJE48 CAT 5e, RIGHT ANGLED, LOW PROFILE Single Port Non-Shielded RJE XX1 TOP VIEW Shielded RJE XX1 TOP VIEW 58

60 RJE58 CAT 5e, RIGHT ANGLED, STANDARD PROFILE Right Angled, Standard Pro ile The RJE58 series of modular jacks meet CAT5e performance per EIA-568-C.2. It supports Gigabit Ethernet Protocols. Shielding available for increased EMI performance and LEDs for link activity and network speed verification. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: LED Forward DC Current: LED Forward Voltage: High temperature thermoplastic. Complies with UL 94V-0. Colour: Black. Phosphor Bronze hard temper with gold thickness option (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. Stainless steel with tin dipped tails. Tin plating on LED tails. Expoxy lens. Ordering Information Number of Ports 1-1 Port LED Reverse Voltage: LED Light Intensity: LED Wave Length: Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: 20 mω maximum Durability: 500 MΩ minimum at 500V DC for 2 mins. Recommended Soldering Temperature: max Amps Operating Temperature: 125 Volts AC 1000 VAC, 60 Hz. 1 minute 20mA typical 1.9 Volts (for single colours) 2.6 Volts maximum@20ma (for Bi-colours) Number of Positions 8-8 Positions Number of Contacts 8-8 Contacts Shield Options 5 - Full shield with top and side tabs 6 - Full shield with no tabs RJE X X X X X Packaging Blank - Tray T - Tape & Reel Modifier 1 - Standard with boardlocks 2 - Without boardlock LED Options Refer to page 69 for options Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating 5 Volts minimum 0.4 to 1.5 (for single colors) 0.5 mcd (for bi-colours) Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles Wave soldering peaked at 260 C for 5 seconds maximum. -55 C to + 85 C 59

61 RJE58 CAT 5e, RIGHT ANGLED, STANDARD PROFILE Single Port Shielded - Option 5 RJE XX1 Shielded - Option 6 RJE XX1 60

62 RJE72 CAT 5e, RIGHT ANGLED, RECESSED, LOW PROFILE Right Angled, Recessed, Low Pro ile The RJE72 series of modular jacks meet CAT5e performance per EIA-568-C.2. It supports Gigabit Ethernet Protocols. Shielding available for increased EMI performance and LEDs for link activity and network speed verification. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: High temperature thermoplastic. Complies with UL 94V-0. Colour: Black. Phosphor Bronze hard temper with gold thickness option (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin on solder tail. Stainless steel with tin dipped tails. Tin plating on LED tails. Expoxy lens. 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max Amps Current Rating: Voltage Rating: 125 Volts AC DWV: 1000 VAC, 60 Hz. 1 minute LED Forward DC Current: LED Forward Voltage: 20mA typical 1.9 Volts (for single colours) LED Reverse Voltage: LED Light Intensity: LED Wave Length: Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: 5 Volts minimum 0.4 to 1.5 (for single colors) Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles IR Reflow peaked at 260 C for 5-8 seconds maximum. -55 C to + 85 C E Ordering Information Number of Ports 1-1 Port 4-4 Ports Number of Positions 8-8 Positions Number of Contacts 8-8 Contacts Shield Options 1 - Full shield RJE72 - X 8 8 X X - 1 X - X Packaging Blank - Tray T - Tape & Reel Contact Length (3.18mm) (2.27mm) (2.16mm) LED Options Refer to page 69 for options Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating 61

63 RJE72 CAT 5e RIGHT ANGLED, RECESSED, LOW PROFILE Single Port RJE X1 TOP VIEW Multi Port RJE X1 TOP VIEW 62

64 RJE71 CAT 6, RIGHT ANGLED, RECESSED, LOW PROFILE Right Angled, Recessed, Low Pro ile The RJE71 series of modular jacks meet CAT6 performance per EIA-568-C.2. It supports Gigabit Ethernet Protocols. Shielding available for increased EMI performance and LEDs for link activity and network speed verification. Speci ications Material Insulator: Contacts: Shield: LED: Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: LED Forward DC Current: LED Forward Voltage: High temperature thermoplastic. Complies with UL 94V-0. Colour: Black. Phosphor Bronze hard temper with gold thickness option (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin on solder tail. Stainless steel with tin dipped tails. Tin plating on LED tails. Expoxy lens. 20 mω maximum 500 MΩ minimum at 500V DC for 2 miutes maximum 1.25 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute 20mA typical 1.9 Volts (for single colours) LED Reverse Voltage: LED Light Intensity: LED Wave Length: Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Recommended Soldering Temperature: Operating Temperature: UL File #: 5 Volts minimum 0.4 to 1.5 (for single colors) Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles IR Reflow peaked at 260 C for 5-8 seconds maximum. -55 C to + 85 C E Ordering Information RJE71 - X 8 8 X X - 1 X - X Packaging Blank - Tray T - Tape & Reel Number of Ports 1-1 Port 4-4 Ports Number of Positions 8-8 Positions Contact Length (3.18mm) (2.27mm) (2.16mm) LED Options Refer to page 69 for options Number of Contacts 8-8 Contacts Shield Options 1 - Full shield Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating 63

65 RJE71 CAT 6, RIGHT ANGLED, RECESSED, LOW PROFILE Single Port RJE XXX TOP VIEW Part Number DIM A RJE XX1 3.18[0.125] RJE XX2 2.27[0.089] RJE XX3 2.16[0.085] Multi Port RJE XX1 TOP VIEW 64

66 RJE45 CAT 6, SINGLE PORT CAT 6, Single Port The RJE45 series of modular jacks meet CAT6 performance per EIA-568-C.2. It supports Gigabit Ethernet Protocols and 10 Gig links in applications up to 50m. Shielding available for increased EMI performance and LEDs for link activity and network speed verification. Speci ications Material Insulator: High Temp thermoplastic. Complies with UL 94V-0. Colour: Black. Contacts: Phosphor Bronze hard temper with gold thickness options (6μ, 15μ, 30μ, 50μ ), over 50μ minimum nickel on contact mating area. 100μ minimum matte tin plating on solder tails. Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability Recommended Soldering Temperature: Operating Temperature 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles Wave soldering peaked at 260 C for 10 seconds maximum. -55 C to + 85 C LED Light Intensity: LED Wave Length: Electrical Contact Resistance: Insulation Resistance: 0.4 to 1.5 Yellow: 587± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA 25 mω maximum 5000 MΩ minimum at 500V DC for 2 mins. max. Current Rating: 1.25 Amps Voltage Rating: 125 Volts AC DWV: 1000 VAC, 60 Hz. 1 minute LED Forward DC Current: 20mA typical LED Forward Voltage: 1.9 Volts LED Reverse Voltage: 5 Volts minimum Ordering Information RJE45 - X XX X X X Number of Ports 1-1 Port 2-2 Port 3-3 Port 4-4 Port Number of Positions 8-8 Positions Number of Contacts 8-8 Contacts Shield Options 0 - No Shield 1 - Shield with PCB tabs, but no side tabs Packaging Blank - Tray T - Tape & Reel Housing Options 1 - Standard, black housing, contact and LED tail length Black housing, contact and LED tail length 0.130, with flange. LED Options Refer to page 69 for options Contact Plating 1-6 μ gold plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 65

67 RJE45 CAT 6, SINGLE PORT Single Port Shielded RJE XX1 Single Port Non-Shielded RJE XX1 Notes 66

68 RJE17 RJ 45 COUPLER RJ45 Coupler The RJE17 coupler provides connections through barriers such as equipment covers and panels. They are locked into place with a panel latch for secure mounting. Available in CAT3 and CAT5 performance. The added shielding provides optional EMI protection. Speci ications Material Insulator: Contacts: Shield: Engineering thermoplastic. Complies with UL 94V-0. Colour: Black. Phosphor Bronze hard temper with gold thickness options (30μ,50μ ) over 50μ minimum nickel on contact mating area. Stainless steel Electrical Contact Resistance: Insulation Resistance: Current Rating: Voltage Rating: DWV: 20 mω maximum 500 MΩ minimum at 500V DC for 2 mins. max. 1.5 Amps 125 Volts AC 1000 VAC, 60 Hz. 1 minute Mechanical Mating Connector Insertion Force: Mating Connector Pull Retention Force: Durability: Operating Temperature: 5 lbs. maximum 20 lbs. minimum 750 mating & unmating cycles -40 C to + 85 C Ordering Information Number of Ports 2-2 Ports Number of Positions 8-8 Positions Number of Contacts 8-8 Contacts RJE X X X Modifier 1 - CAT3 with mate tin plating on internal tail 2 - CAT5e with matte tin plating on internal tail Port Options 1 - Both ports are tab down 2 - One port is tab up and the other in tab down Contact Plating 2-15 μ gold plating 3-30 μ gold plating 4-50 μ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 67