PC/104, PC/104 Plus Specification
|
|
- Rudolph Griffith
- 6 years ago
- Views:
Transcription
1 PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch (M20) Materials PC/104 Plus mm pitch (M22) Materials Mouldings: High Temperature Plastic, UL94V-0 Mouldings: High Temperature Plastic, UL94V-0 Contacts: Phosphor ronze Contacts Finish: Gold M22-602: rass Others: Phosphor ronze Electrical Current Solder Tail: 3A max Finish: Electrical See order code Press-Fit Tail: 1A max Current: 1A max Working voltage: 12V DC Working voltage: 12V DC Voltage proof: 1,000V AC Voltage proof: 800V AC Contact resistance: 30mΩ max Contact resistance: 30mΩ max Insulation resistance: 5,000MΩ min Insulation resistance: 5,000MΩ min Mechanical Mechanical Durability Mating: Press-fit: Insertion force (max): Withdrawal force (min): Insertion force to board (max) Press-Fit: 10 operations 3 operations 2.0N per contact 0.25N per contact 80N per contact Durability: Insertion force (max): Withdrawal force (min): Environmental Temperature range: 10 operations 2.0N per contact 0.3N per contact -55 C to +105 C Environmental Temperature range: -55 C to +105 C Typical PC/104 & PC/104-Plus Module Stack 8-bit Module comprising: = contacts Stackthrough: M J3 16-bit Module comprising: = contacts Stackthrough: M = contacts Stackthrough: M or M PCI us Module comprising: = contacts Stackthrough: M = contacts Stackthrough: M or M J3 = 120-contacts Stackthrough: M mm (0.6") Assembled PC/104 stack (4 Modules) J3 PCI us Module comprising: = contacts Non-stackthrough: M or M = contacts Non-stackthrough: M or M J3 = 120-contacts Non-stackthrough: M
2 PC/104 Connectors mm Pitch Vertical us Connectors contacts supports an 8-bit system contacts combined with contacts supports a 16-bit system. Press-fit connectors can be assembled direct to the PC without soldering, using plated-through holes. Stackthrough connectors act as both male and female connectors. SOLDER TAIL CALCULATION A PRESS-FIT TAIL CALCULATION A x (No. of contacts per row - 1) x (No. of contacts per row - 1) C x No. of contacts per row A A Tail 0.64 x 0.60 Tail 0.64 square Press-Fit connector M supplied with spacer moulding C 3.80 Ø1.02 Ø Plated Through Hole 0 Stackthrough, 12.20mm Solder Tail 1 Non-Stackthrough, 2.30mm Solder Tail 5 Stackthrough, 12.10mm Press-Fit Tail 6 Non-Stackthrough, 3.40mm Press-Fit Tail M20-61 X XX XX 05 Gold (M20-615, 616) 45 Gold (M20-610, 611) 20,
3 2mm Pitch Vertical us Connectors Supports PCI bus. Stackthrough connectors act as both male and female connectors. Available in Solder tail configuration. Ø.90 STACKTHROUGH Recommended PC oard Pattern NON-STACKTHROUGH Stackthrough 1 Non-Stackthrough M22-60 X Gold
4 2mm Pitch Accessory Connectors Accessory connectors for use with the PC/104 Plus range. PC/104 PLUS POST HEADER PC/104 PLUS POST HEADER RECEPTACLE Ø0.80 Ø Post Header 3 Post Receptacle M22-60 X Gold + Tin
5 Accessories Accessory components for use with the PC/104 Plus range. The shroud is used to protect the long tails of the Stackthrough connector from the previous page, and ensures alignment with a mating connector. It self retains on the underside of the PC after the Stackthrough connector has been soldered to the PC, by latching into the four mounting holes. PC/104 PLUS SHROUD Ø ORDER CODE M PC/104 SPACER min 1.25 max 4.75 M3 M3 ORDER CODE R
COMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationPC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More information2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationM20 and M22. (2.54mm and 2.00mm pitch)
M20 and M22 (2.54mm and 2.00mm pitch) M20 and M22 Connectors Great Design Flexibility Today s electronics and PCB designers are faced with many connector challenges, including applications with increased
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More information343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationPCB Hardware. Contents. SMT Test Points SMT Cable Clips SMT Jumper Links PCB Jumper Links PCB Terminals, Turret Lugs Spacers / Pillars / Standoffs
PC Hardware Contents SMT Test Points SMT Cable Clips SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with standard probes,
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationDubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
More informationPCB Hardware. Contents
PC Hardware Contents SMT Test Points SMT Cable Clips Coin Cell Holders SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with
More informationPC/104, PC/104-Plus %ASYç3TACKINGçWITHç0RESS lt 160
160 PC/104, Contents Introduction 162 Overview 163 The Standard 164 166 167 PC/104 168 170 Accessories: 173 161 Introduction PC/104, Highest Quality for Established Form Factor PC/104 and is a standard
More informationMinitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
More informationHIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
More informationProduct Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More information.050" IDC Connectors for.025" Ribbon Cable - M73 Series
.050" IDC Connectors for.025" Ribbon Cable - M73 Series PRT NUMER LEGEND M73X-XXXX-XX STYLE 01 = Low profile.050" IDC Socket for single layer.025" Flat Cable 02 = Standard profile IDC Socket for single
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationMiniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
More information6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
More informationIntroduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
More informationUSB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
More informationNEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT
NEW ITEM AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A - TYPE FLANGE 3 CONTACT Features: Thermoplastic Shell Industry standard PC footprints. Vertical or Horizontal PC mounting. Precision machined pin contacts.
More information0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
More informationHigh-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
More informationHigh-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
More informationITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationMinitek Product Presentation
Minitek Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals 2 Value Proposition
More informationSEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
More information2.5mm & 3.5mm AUDIO JACKS STEREO & MONO EARPHONE JACKS ASJ SERIES
.mm &.mm AUDIO JACKS INTRODUCTION: Adam Tech ASJ Series Stereo Jacks are a broad range of.mm and.mm jacks used primarily in computer and multi-media audio applications. This series provides a multitude
More informationConnectors DIN 41612/IEC
Connectors DIN 41612/IEC 60603-2 and completions General information The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19"
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
More information0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
More informationUSB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More informationHD Series. Signal Connector DIN Applicable Markets: Mil-Aero Space Marine
Signal Connector DIN 41612 HDC and HDD interchangeable with DIN41612 C and D 0.6 mm and 1.0 mm Hypertac contacts, in a two or three row format Up to 192 positions HDT style offers mixed arrangements with
More information2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
More informationBergstak 0.80mm Pitch Product Presentation
Bergstak 0.80mm Pitch Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More informationIEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
More informationMinitek Pwr 4.2 HCC Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Markets & Applications Marcomm Collaterals Product Presentation 2
More information09. DIN Connectors
. Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal
More informationCOMMUNICATIONS, DATA, CONSUMER DIVISION DIN Selector Guide. PCB Connectors
COMMUNICATIONS, DATA, CONSUMER DIVISION DIN 41612 Selector Guide PCB Connectors FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries, FCI is a leading manufacturer of connectors. Our
More informationHigh-Reliability at 1.25mm pitch
High-Reliability at 1.25mm pitch Why a micro-miniature connector? A demand for a smaller footprint, an increasing number of high density opportunities, and a requirement for a lightweight connector solution,
More information2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationMilli-Grid 2.00mm (0.79 ) Pitch. Interconnect System for Complete Design Flexibility
Milli-Grid for Complete Design Flexibility Milli-Grid 50394, 87396 Crimp Terminal 5110, 78045 Receptacle Crimp Housing 87568 IDT Receptacle 87569 IDT Strain Relief 87831, 78246 Through-Hole 87832 SMT 87833,
More informationXSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
More informationSeries PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
More informationXH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
More informationRH1-ZZ Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange
To: Customer P/N: UDE P/N: Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange Spec No. RH116037-00 Update Date 2016/11/1 Revision A Approved
More informationDynamic Series Connectors
D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More information0.6 mm Pitch, Docking Station Connectors
mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16
More information2.54mm (.100") Pitch Connectors
mm (.100") Pitch Connectors HRWIN plc Fitzherbert Road, Farlington, Portsmouth, Hampshire, PO6 1RT, UK Tel: (Sales) +44 (0) 23 9237 0451 Tel: (dmin) +44 (0) 23 9231 4545 Fax: +44 (0) 23 9231 4590 Sales,
More information2.54. Printed circuit connector. Design DIL
Printed circuit connector esign (max.) 04 Z 4 8.00 5.10 7.62 11.00 06 Z 6 10.30 7.60 5.08 7.62 11.00 08 Z 8 13.00 10.20 7.62 7.62 11.00 10 Z 10 15.40 12.70 10.16 7.62 11.00 12 Z 12 18.00 15.30 5.08 7.62
More information0.6 mm Pitch, Docking Station Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationCPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire Features Compact design.0mm pitch is realized miniaturization and low profile as the connector for automobile. Terminal construction Female terminal is designed for simple box
More informationZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationCustomer P/N: UDE P/N: RUK-ZZ Description:
To: Customer P/N: UDE P/N: Description: RJ45 Tab up over USB stack Through Hole 10/100/1000 Base-T Contact Area : 30μ'' min. Gold LED: L-Green/Orange;R-Yellow Spec No. RUK17006-00 Update Date 2017/6/7
More informationPower Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
More informationKey features: M8 Series BUCCANEER. Full Contact Diagrams Page 130
UCCNEER ulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory
More informationAmphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
More information1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More informationHSSDC. HSSDC High Speed Serial Data Connection receptacles. HSSDC Receptacle. U45 - A APPLICATIONS ORDERING INFORMATION
HSSDC High Speed Serial Data Connection receptacles meet high-speed differential communication protocols with speeds exceeding 1 Gbps such as IEEE 802.3z and Fibre Channel. This system is designed to conform
More informationFLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm
0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
More informationRight Angle 2.0mm Pitch Connector
AVX extends their board-to-board right angle connectors with a new 2mm pitch version, an addition to the existing versions 9155-300 with a 3mm pitch and 9155-500 with a 2.5mm pitch. This new connector
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More information1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
More information3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationAdvance Concept Release for. Initial Pre-Production Sampling Only. Device Bay Connector System
Advance Concept Release for Initial Pre-Production Sampling Only R Device Bay Connector System Molex Device Bay Interconnection System Simplifying PC & Peripheral Installation and Upgrades Driven by customers
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More informationMaterials. Specification Operating temperature range. 55 C to +105 C Current rating
PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder
More informationDatamate High-Reliability Connectors
Datamate High-Reliability Connectors Industry recognised, British Standard approved Datamate is the field-proven high-reliability range of choice for many industries. Approved to British Standard 9525-F0033
More information1.25mm Pitch Miniature Crimping Connector
1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
More information