Quick Start. for Hardware Installation Avaya S8700-Series Servers Issue 8 January

Transcription

1 Quick Start for Hardware Installation Avaya S87-Series Servers --7 Issue 8 January

2 8 Avaya Inc. All Rights Reserved. Notice While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information in this document may be incorporated in future releases. For full support information, please see the complete document, Avaya Support Notices for Hardware Documentation, document number To locate this document on our Web site, simply go to and search for the document number in the search box. Documentation laimer Avaya Inc. is not responsible for any modifications, additions, or deletions to the original published version of this documentation unless such modifications, additions, or deletions were performed by Avaya. Customer and/or End User agree to indemnify and hold harmless Avaya, Avaya's agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation to the extent made by the Customer or End User. Link laimer Avaya Inc. is not responsible for the contents or reliability of any linked Web sites referenced elsewhere within this documentation, and Avaya does not necessarily endorse the products, services, or information described or offered within them. We cannot guarantee that these links will work all of the time and we have no control over the availability of the linked pages. Warranty Avaya Inc. provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya s standard warranty language, as well as information regarding support for this product, while under warranty, is available through the following Web site: Copyright Except where expressly stated otherwise, the Product is protected by copyright and other laws respecting proprietary rights. Unauthorized reproduction, transfer, and or use can be a criminal, as well as a civil, offense under the applicable law. Avaya support Avaya provides a telephone number for you to use to report problems or to ask questions about your product. The support telephone number is -8-- in the United States. For additional support telephone numbers, see the Avaya Web site:

3 Process and Specifications Verifying the Equipment Installing the SNMP Module in the UPS Installing the Optional Second Hard Drive Installing the DAL Card Installing the Hardware in the Rack 6 Connecting the Cables 7 Configuring the UPS and the Ethernet Switch 8 Connecting the Laptop 9 Connecting to the G6 Media Gateway Troubleshooting Hardware Specifications Weight Dimensions Equipment English (lb) Metric (kg) English (in) Metric (cm) Us S87, S87, or S87 Server 6 7. x 7. x x x 66 UPS > >. x 7 x 9 9 x x 8 Ethernet switch C6T.7 x 7 x.. x x 6. C6T.7 x 7 x.. x x 6. Issue 8 January 8

4 Legend Documentation Avaya technician or business partner Customer Product documentation Green straight-through CAT cable Red straight-through CAT cable Crossover CAT cable Services laptop D H/C Customer network Sequence step Duplex reliability High/Critical reliability Nonswitched electrical outlet System administration Filled-out Electronic Pre-Installation Worksheet (EPW) 87qslgnd KLC 6 Anti-static wrist ground strap required Warning! Use people to lift equipment Quick Start for Hardware Installation: Avaya S87-Series Servers

5 LNK COL Tx Rx FDX Hspd LAG PoE S S LNK COL Tx Rx FDX Hspd LAG PoE S S Verifying the Equipment Product documentation Compact flash Modem () Services reader and laptop flashcard Documentation CAT CAT CAT CAT () ( -68) ( - 68) () () () Fiber cable IPSI control network cables Duplication cable Laptop to server cable Modem cable SNMP module and cable () /bt ETHERNET /bt ETHERNET Cross-point screwdriver IPSI adapter ( - 8) Screws Simplex Duplex ch ch Server () Ethernet switch * ( or more) UPS* () Ethernet switch* Customer network 9 in. (8 cm) data rack () ( or more) Screws UPS* () System administration and filled-out Electronic Pre-Installation Worksheet *Optional 87qseq LAO 6 Issue 8 January 8

6 COMM PORT IOIOI ISOLATED ALARM PORT LNK COL Tx Rx FDX Hspd LAG PoE S S a Installing the SNMP Module in the UPS COMM PORT IOIOI ISOLATED ALARM PORT COMM PORT IOIOI ISOLATED ALARM PORT 87qsa KLC 6 b UPS and Ethernet Switch Mounting Brackets 87qsb LAO 6 Quick Start for Hardware Installation: Avaya S87-Series Servers

7 FANS CAGE INTER LOCK OVER TEMP I-PPM Installing an optional second hard drive (S87) Note: Note: To use RAID, available on the S87 Server only, install an optional second hard drive. POWER POWER SUPPLY SUPPLY DIMMS DIMMS PROC PROC PPM PCI RISER 87qsxf LAO 87 Issue 8 January 8 7

8 a Installing the DAL Card: Removing the Cover (S87 Server shown) Simplex Duplex ch ch 87qsxa LAO 6 8 Quick Start for Hardware Installation: Avaya S87-Series Servers

9 b Installing the DAL Card: Removing the PCI Riser Cage (S87/S87) MGz MGz MGz 87qsxb LAO 6 Issue 8 January 8 9

10 c Installing the DAL Card: Removing the DAL Card (S87/ S87) Note: Note: Communication Manager. requires removing the DAL card and replacing it with the DAL card. DAL 87qsd LAO 87 Quick Start for Hardware Installation: Avaya S87-Series Servers

11 d Installing the DAL Card: Inserting the DAL Card (S87/S87) DAL 87qsxc LAO 6 Issue 8 January 8

12 e Installing the DAL Card: Replacing the PCI Riser Cage (S87/S87) DAL MGz MGz MGz 87qsxd LAO 6 Quick Start for Hardware Installation: Avaya S87-Series Servers

13 f Installing the DAL Card: Removing the PCI Riser Cage (S87) DAL PCIe PCIe 87qsxb LAO 87 Issue 8 January 8

14 g Installing the DAL Card: Inserting the DAL Card (S87) DAL 87qsxc LAO 867 Quick Start for Hardware Installation: Avaya S87-Series Servers

15 h Installing the DAL Card: Replacing the PCI Riser Cage (S87) DAL PCIe 87qsxd LAO 87 Issue 8 January 8

16 i Installing the DAL Card: Replacing the Cover (S87 Server shown) Simplex Duplex ch ch 87qsxe LAO 6 6 Quick Start for Hardware Installation: Avaya S87-Series Servers

17 a Installing the Hardware in the Rack: Attaching Rails to the Server (S87 Server shown) Simplex Duplex ch ch 87qsc KLC 6 Issue 8 January 8 7

18 b Installing the Hardware in the Rack: Attaching Rails to the Rack (S87/S87) 87qsf LAO 97 8 Quick Start for Hardware Installation: Avaya S87-Series Servers

19 c Installing the Hardware in the Rack: Attaching Rails to the Rack (S87) Note: Note: For racks with screw holes, see instructions included with the rail kit. 87qsd KLC 6 Issue 8 January 8 9

20 d Installing the Hardware in the Rack: Inserting the Server Rails into the Rack Rails (S87 shown) Simplex Duplex ch ch 87qsh LAO 98 Quick Start for Hardware Installation: Avaya S87-Series Servers

21 LNK COL Tx Rx FDX Hspd LAG PoE S S LNK COL Tx Rx FDX Hspd LAG PoE S S S LNK COL Tx Rx FDX Hspd LAG PoE S e Installing the Hardware in the Rack: Recommended Locations (S87 shown) D 8 H/C 9 Simplex Duplex ch ch Simplex Duplex ch ch Simplex Duplex ch ch Simplex Duplex ch ch * ft (.m) * * * 6 * * * 87qscf LAO Issue 8 January 8

22 LNK COL Tx Rx FDX Hspd LAG PoE S S POWER POWER PCI SUPPLY SUPPLY RISER CAGE DIMMS DIMMS PROC PROC FANS PPM INTER LOCK OVER TEMP I-PPM POWER POWER PCI SUPPLY SUPPLY RISER CAGE DIMMS DIMMS PROC PROC FANS PPM INTER LOCK OVER TEMP I-PPM BUPS INPUT -7V 8A max PCIe PCIe PCIe PCIe X6STK CPR ILO ILO CABLE TO UPPER UNIT CABLE TO LOWER UNIT U L 6a Connecting the Cables: Duplex Reliability (software memory duplication, S87) (If dedicated control network) D + _ (If non-dedicated control network) 87qsc LAO 97 Quick Start for Hardware Installation: Avaya S87-Series Servers

23 LNK COL Tx Rx FDX Hspd LAG PoE S S BUPS INPUT -7V 8A max MGz MGz MGz MGz MGz MGz X6STK CPR CABLE TO UPPER UNIT CABLE TO LOWER UNIT U L 6b Connecting the Cables: Duplex Reliability (software memory duplication, S87) (If dedicated D Simplex Duplex ch ch Simplex Duplex ch ch + _ (If non-dedicated control network) 87qsc LAO 97 Front Rear Issue 8 January 8

24 LNK COL Tx Rx FDX Hspd LAG PoE S S POWER POWER PCI SUPPLY SUPPLY RISER CAGE DIMMS DIMMS PROC PROC FANS PPM INTER LOCK OVER TEMP I-PPM POWER POWER PCI SUPPLY SUPPLY RISER CAGE DIMMS DIMMS PROC PROC FANS PPM INTER LOCK OVER TEMP I-PPM BUPS INPUT -7V 8A max DAL DAL PCIe PCIe PCIe PCIe X6STK CPR ILO ILO CABLE TO UPPER UNIT CABLE TO LOWER UNIT U L 6c Connecting the Cables: Duplex Reliability (hardware memory duplication, S87) (If dedicated control network) D + _ (If non-dedicated control network) 87qsb LAO 97 Front Rear Quick Start for Hardware Installation: Avaya S87-Series Servers

25 LNK COL Tx Rx FDX Hspd LAG PoE S S BUPS INPUT -7V 8A max DAL DAL MGz MGz MGz MGz MGz MGz X6STK CPR CABLE TO UPPER UNIT CABLE TO LOWER UNIT U L 6d Connecting the Cables: Duplex Reliability (hardware memory duplication, S87/S87) (If dedicated control network) D Simplex Duplex ch ch Simplex Duplex ch ch + _ (If non-dedicated control network) 87qsb LAO 97 Front Rear Issue 8 January 8

26 LNK COL Tx Rx FDX Hspd LAG PoE S S LNK COL Tx Rx FDX Hspd LAG PoE S S POWER POWER PCI SUPPLY SUPPLY RISER CAGE DIMMS DIMMS PROC PROC FANS PPM INTER LOCK OVER TEMP I-PPM POWER POWER PCI SUPPLY SUPPLY RISER CAGE DIMMS DIMMS PROC PROC FANS PPM INTER LOCK OVER TEMP I-PPM BUPS INPUT -7V 8A max BUPS INPUT -7V 8A max DAL DAL PCIe PCIe PCIe PCIe X6STK CPR X6STK CPR ILO ILO CABLE TO UPPER UNIT CABLE TO LOWER UNIT CABLE TO UPPER UNIT CABLE TO LOWER UNIT U U L L 6e Connecting the Cables: High or Critical Reliability (hardware memory duplication, S87) H/C + _ + _ (If non-dedicated control network) 87qsd LAO 97 Front Rear 6 Quick Start for Hardware Installation: Avaya S87-Series Servers

27 LNK COL Tx Rx FDX Hspd LAG PoE S S LNK COL Tx Rx FDX Hspd LAG PoE S S BUPS INPUT -7V 8A max BUPS INPUT -7V 8A max DAL DAL MGz MGz MGz MGz MGz MGz X6STK CPR X6STK CPR CABLE TO UPPER UNIT CABLE TO LOWER UNIT CABLE TO UPPER UNIT CABLE TO LOWER UNIT U U L L 6f Connecting the Cables: High or Critical Reliability (hardware memory duplication, S87/S87) H/C Simplex Duplex ch ch Simplex Duplex ch ch + _ + _ (If non-dedicated control network) 87qsd LAO 97 Front Rear Issue 8 January 8 7

28 6g Connecting the Cables: Duplication Cabling for Hardware Memory Duplication (S87) DAL PCIe PCIe ILO DAL PCIe PCIe ILO 87 j LAO 97 6h Connecting the Cables: Duplication Cabling for Hardware Memory Duplication (S87/S87) MGz DAL MGz MGz DAL MGz MGz MGz 87qsf LAO 97 8 Quick Start for Hardware Installation: Avaya S87-Series Servers

29 6i Connecting the Cables: Duplication Cabling for Software Memory Duplication (S87) DAL PCIe PCIe ILO DAL PCIe PCIe ILO 87qsi LAO 97 6j Connecting the Cables: Duplication Cabling for Software Memory Duplication (S87) MGz MGz MGz MGz MGz MGz 87qsi LAO 97 Issue 8 January 8 9

30 BUPS INPUT -7V 8A max DAL DAL MGz MGz MGz MGz MGz MGz X6STK CPR CABLE TO UPPER UNIT U CABLE TO LOWER UNIT L 7a Configuring the UPS* and the Ethernet Switch (S87 shown) *If Avaya-supplied D H/C + _ 87qsca LAO 97 Documentation Quick Start for Hardware Installation: Avaya S87-Series Servers

31 BUPS INPUT -7V 8A max BUPS INPUT -7V 8A max BUPS INPUT -7V 8A max DAL DAL DAL DAL MGz MGz MGz MGz MGz MGz MGz MGz MGz MGz MGz MGz X6STK CPR X6STK CPR X6STK CPR CABLE TO UPPER UNIT CABLE TO LOWER UNIT CABLE TO UPPER UNIT CABLE TO LOWER UNIT CABLE TO UPPER UNIT CABLE TO LOWER UNIT U U U L L L LNK COL Tx Rx FDX Hspd LAG PoE S LNK COL Tx Rx FDX Hspd LAG PoE S S S S LNK COL Tx Rx FDX Hspd LAG PoE S b Configuring the UPS and the Ethernet Switch* *If Avaya-supplied D Simplex Duplex ch ch Simplex Duplex ch ch + _ CONSOLE Documentation H/C Simplex Duplex ch ch Simplex Duplex ch ch + _ + _ CONSOLE Documentation 87qsb LAO 97 Issue 8 January 8

32 BUPS INPUT -7V 8A max + _ DAL DAL BUPS INPUT -7V 8A max PCIe PCIe DAL DAL MGz MGz MGz MGz MGz MGz PCIe PCIe X6STK CPR X6STK CPR ILO ILO CABLE TO UPPER UNIT CABLE TO LOWER UNIT CABLE TO UPPER UNIT CABLE TO LOWER UNIT U U L L 8a Connecting the Laptop to Server (S87) D H/C + _ Documentation 87qsc LAO 7 8b Connecting the Laptop to Server (S87/S87) D H/C Documentation 87qscc LAO 97 Quick Start for Hardware Installation: Avaya S87-Series Servers

33 BUPS INPUT -7V 8A max DAL DAL + _ BUPS INPUT -7V 8A max PCIe PCIe DAL DAL MGz MGz MGz MGz MGz MGz PCIe PCIe X6STK CPR ILO ILO CABLE TO UPPER UNIT CABLE TO LOWER UNIT X6STK CPR U L CABLE TO UPPER UNIT CABLE TO LOWER UNIT U L 8c Connecting the Laptop to Server (S87) D H/C + _ 87qsd LAO 7 8d Connecting the Laptop to Server (S87/S87) D H/C 87qscd LAO 97 Issue 8 January 8

34 LNK COL Tx Rx FDX Hspd LAG PoE S S S S LNK COL Tx Rx FDX Hspd LAG PoE S LNK COL Tx Rx FDX Hspd LAG PoE S VDC -8 VDC -8 VDC -8 VDC -8 VDC -8 VDC RETURN -8 VDC RETURN -8 VDC RETURN -8 VDC RETURN -8 VDC RETURN -8 VDC RETURN -8 VDC 9 Connecting to the G6 Media Gateway D E Simplex Duplex ch ch Simplex Duplex ch ch B A H/C E Simplex Duplex ch ch IPSI adapter Simplex Duplex ch ch B A 87qs6b LAO 6 Quick Start for Hardware Installation: Avaya S87-Series Servers

35 Troubleshooting Problem: Solution: Avaya equipment is missing Customer equipment is missing Customer network information is missing No power to the UPS The alarm LEDs on the UPS are flashing No power to the Avaya-supplied Ethernet switch Alarm LEDs on the Avaya-supplied Ethernet switch are flashing No power to the server Contact the project manager Contact the project manager Contact the project manager Is the UPS plugged into the outlet? Does the outlet have power? Refer to the UPS user s guide Is the switch plugged into the UPS? Does the UPS have power? Refer to the Avaya-supplied Ethernet switch user s guide Is the server plugged into the UPS? Does the UPS have power? Push the power button on the server to start The blue status LED on the server is flashing slow The server is in the standby mode No V on the IPSI LCD Check the connection to the network Issue 8 January 8

36 6 Quick Start for Hardware Installation: Avaya S87-Series Servers