DALI Economy LED Drivers DALI/1-10V/Switch-Dim

Transcription

1 Synchrony Economy ED Drivers /1-1V/ HED22 / HED2 / HED2 / HED26 Applications Ideal for use with plug n play or broadcast master. Fully addressable systems which do not require feedback. Suitable for ED panels - insulated terminal cover with cord restraint: Office / Commercial ighting Health Care Classrooms Use for retrofit upgrades & new luminaire designs. Features > HYBRID 1-1V (HED2 / HED2 only) with Synchronization Active C Design Hybrid Flicker-free Dimming Configurable Constant Current (CC) Output via Dip-Switch ogarithmic Dimming inear Dimming Thermal Cut-out Protection Short Circuit Protection Over-load Protection } All with Auto-restart Permanent Settings Memory, Protected against oss of Power 5 Year,,hr Warranty Output Configuration HED22, 1x2W HED2, 1xW HED2, 1xW HED26, 1x6W 24V 12V ma ma ma 3mA 3mA ma 4mA ma 5mA 6mA 6mA ma 7mA ma 8mA ma 9mA 1mA 1mA 11mA ma 7mA ma 8mA ma 9mA 1mA 1mA 11mA 11mA 12mA 12mA 1mA 13mA 1mA 2.1A 2.A 1.75A 1.6A 1.A 1.2A 1.5A Warning: Please make sure the correct current is selected before starting the driver! 5 Hytronik ED Drivers

2 Technical Data Model o. HED22 HED2 HED2 HED26 Mains Voltage 22 AC /6Hz Mains Current.125 ~.115A.23 ~.21A.3 ~.25A.35 ~.27A Input Power Factor Max. Efficiency Dielectric Strength eakage Current 85% 88% Input Output : VAC <.25mA Output Power/Current/ Voltage Range 15W/3mA /9~45V 2W/mA /9~43V 2W/mA /9~V 2W/mA /9~23V Constant Voltage 1W /12V 2W /24V 2W/3mA 23W/mA 26W/4mA 29W/mA 32W/5mA 35W/6mA 38W/6mA W/mA 42W/7mA /12~56V 45W/mA /12~56V 45W/8mA /12~53V 45W/mA /12~V 45W/9mA /12~47V 45W/1mA /12~45V 45W/1mA /12~43V 45W/11mA /12~41V.5W/mA 43.5W/7mA 46.5W/mA 49W /8mA W /ma /12~56V W /9mA /12~53V W /1mA /12~V W /1mA /12~48V W /11mA /12~45V W /11mA /12~43V W /12mA /12~42V W /12mA /12~V W /1mA /12~38V W /13mA /12~37V W /1mA /12~36V 55W/1.5A /16~53V 6W/1.2A /16~V 6W/1.4A /16~43V 6W/1.6A /16~38V 6W/1.75A /16~35V 6W/2.A /16~V 6W/2.1A /16~28V Ripple Current Uout Max. V V V V Turn-on Time <.5s <.5s <.5s <.5s Dimming Interface,,, 1-1V Operation Temp. Environment Case Temp. (Max.) 75 IP Rating EMC Standard E515, E61547, E61-3-2, E Safety and EMC Safety Standard Standard Certifications E ,E62493,E IEC ; IEC ; IEC Semko, CB, RCM, CE, EMC Dimensions and Terminals Model: HED22 1x2W Switch ED Current & Voltage Selection ED Hytronik ED Drivers 6

3 Model: HED2 1xW / HED2 1XW 4.5 ED Current Selection + - ED V Model: HED26 1x6W ED+ ED- ED Current Selection Wire Preparation mm 1.5-3mm 8mm 8mm To make or release the wire from the terminal, use a screwdriver to push down the button. ED output HED26 only. oading and In-rush Current Model HED22 HED2 HED2 HED26 In-rush Current (Imax.) 1.92 A 5.35 A 5.1 A 4.8 A Pulse Time 6 μs 6 μs 6 μs μs umber of Drivers Based upon 16A Circuit Breaker Cct Breaker Type HED22 HED2 HED2 HED26 Type B Type C Hytronik ED Drivers

4 Wiring Diagrams Connections Connections *Push Switch ED + ED *Push Switch ED + ED ED + ED ED+ ED * Optional for manual over-ride of, check compatibility as the system may periodically over-ride. * 1-1V is disabled upon connection. * Unused terminals have been omitted for clarity. * Unused terminals have been omitted for clarity. 1-1V Connections ED + ED 1-1V + 1-1V 1-1V ED + ED 1-1V + 1-1V * Unused terminals have been omitted for clarity. Performance Characteristics HED22 4 EFFICIECY (%) MA MA MA V 66. OAD * Typical Efficiency vs oad OAD * Typical Power Factor vs oad Hytronik ED Drivers 8

5 HED EFFICIECY (%) 3MA MA 11MA V OAD OAD * Typical Efficiency vs oad * Typical Power Factor vs oad HED EFFICIECY (%) MA 1MA 1MA V 1 OAD OAD * Typical Efficiency vs oad * Typical Power Factor vs oad HED EFFICIECY (%) 1.5A 1.6A 2.1A V OAD OAD * Typical Efficiency vs oad * Typical Power Factor vs oad 9 Hytronik ED Drivers

6 Dimming Characteristics Dimming Curve Dimming Curve ight output [%] ight output [%] Digital light value s 1.2s 2.4s 3.6s 4.8s 6s 8.6s 9.8s 11s 12.2s 13.4s 16s 17.2s 18.4s 19.6s 2.8s 22s Time (s) 1-1V Dimming Curve ight output [%] v 1V 2V 3V 4V 5V 6V 7V 8V 9V 1V Control voltage (V) ight Output 1% % Dimming Method (, 1-1V, Push) Analogue dimming Dimming range %-1% Analogue 1-% PWM frequency 1KHz PWM dimming Dimming technique PWM ote to provide 3-1% analogue dimming. Please check our website for announcements... Dimming Interface Operation otes This series of products are supplied as default group and are plug n play or independent system ready. These models are also fully addressable and may be assigned to groups within the limits specified by the protocol or supporting controllers by using a programming tool. The standard commands set for light output control are covered by these models. They do not, however, return any request for extended features (such as fault feedback) to the master. Please see our 2 series for ED drivers which can be used in this specification of system. 1-1V (HED2 / HED2 only) The 1-1V input is operable via commercially available simple rotary wall switches designed for 1-1V dimming equipment or from dedicated system central dimming controllers. ote: In the unlikely event that the ED driver be used with the or interface prior to using the 1-1V interface, the 1-1V interface may need to be re-set. This is achieved by placing a short circuit across the 1-1V terminals until the light returns to full brightness (approx. 3-5 seconds). Hytronik ED Drivers 41

7 The provided interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Up to 64 ED drivers maybe connected to one switch. The interface may also be used at the same time as to serve as a manual over-ride. Switch Action Short press (<.4 second) ote: short press has to be longer than.1s, or it will be invalid. ong press (>.4 second) Synchronization Switch Action ong press (>15 seconds) Response Toggle light on / off Toggle dim light / increase brightness Response All lights will dim down to minimum then return to % brightness * We recommend the number of drivers connected to a switch does not exceed 25 pieces. The maximum length of the wires from push to driver should be no more than 2 meters. 411 Hytronik ED Drivers