3M Connectors for Embedded Systems Connectors for AdvancedTCA, CompactPCI and MicroTCA Systems from 3M
|
|
|
- Reynard Jones
- 5 years ago
- Views:
Transcription
1 3M Connectors for Embedded Systems Connectors for AdvancedTCA, CompactPCI and MicroTCA Systems from 3M 3M All Rights Reserved.
2 Introduction Purpose To explain the features and benefits of the connectors for Embedded Computer Systems Objectives Highlight the key features and describe applications Content 11 pages Learning Time 7 minutes 2 3M All Rights Reserved.
3 Overview 3M has expanded its range of connectors for open modular computers meeting PICMG specifications: CompactPCI (cpci) Systems AdvancedTCA (ATCA) Systems Advanced Telecommunications Computing Architecture MicroTCA Systems/μTCA Micro Telecommunications Computing Architecture 3
4 CompactPCI 4
5 3M Power Connector Anatomy Vertical Socket (38 or 47 position) 3 AC power pins Hole for bolt mounting to PCB Optional 24 or15 signal pins 20 DC power pins Press-fit tails Polarization feature Right Angle Header Solder tails 5 Mounting hole RoHS compliant*.76 μm gold plated copper alloy contacts Glass-filled Polyester (PBT) insulator
6 AdvancedTCA 6
7 3M Power Connector Anatomy Vertical Socket (22, 30, and 34 position available) 8 AC power contacts 8 DC power contacts 26 signal contacts Alignment features Right Angle Header 7 RoHS compliant* Press-fit tails.76 μm gold plated copper alloy contacts Glass-filled Polyester (PBT) insulator
8 μtca 8
9 3M Mezzanine Card Connector Anatomy Vertical Cardedge (170 position) Slot for plug-in module attachment 170 signal pins.76 μm gold plated copper alloy contacts Optional mounting holes or guide posts available RoHS compliant* Press-fit tails High-temperature thermoplastic insulator 9
10 3M Power Connector Anatomy Vertical (96 position) 72 signal pins.76 μm gold plated copper alloy contacts Alignment features Right Angle Press-fit tails RoHS compliant* Receptor for alignment post 24 DC power pins Glass-filled themoplastic Polyester insulator 10
11 Summary New PICMG compliant connectors from 3M for CompactPCI (cpci) Systems 38 and 47 position signal/power connectors AdvancedTCA (ATCA) Systems 22, 30, and 34 position signal/power connectors MicroTCA Systems/μTCA 170 position mezzanine and 96 signal/power connectors Mating vertical and right angle versions PCB mounting and alignment features RoHS compliant* 11
12 Important Notice 3M is a trademark of 3M Company. PICMG, PICMG logo, AdvancedTCA, AdvancedTCA logo, and CompactPCI are registered trademarks of PCI Industrial Computer Manufacturers Group. MicroTCA and MicroTCA logo are trademarks of PCI Industrial Computer Manufacturers Group. *RoHS Compliant 2005/95/EC means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is an application that is exempt under EU RoHS. This information represents 3M s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M s Regulatory Information Appendix, then 3M s entire liability and Buyer s exclusive remedy will be accordance with the Warranty stated below. Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability 3M s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 12 3M All Rights Reserved.
3M Connectors for CFast Cards The Next Generation of Removable CompactFlash Storage
3M Connectors for CFast Cards The Next Generation of Removable CompactFlash Storage 3M 2011. All Rights Reserved. Introduction Purpose To explain the features and benefits of the 3M Connectors for removable
3M Power Clamp System Power/Signal Distribution I/O Connector System
3M Power Clamp System Power/Signal Distribution I/O Connector System 3M 2011. All Rights Reserved. Introduction Purpose To explain the features and benefits of the 3M Power Clamp System Objectives Highlight
3M Serial Advanced Technology Attachment (SATA) Connector Signal Plug, Boardmount, Surface Mount Right Angle and PTH Vertical
7-position supports motherboard signal requirements EMLB contacts for hot swap Blind mate polarization for easy cable attach Through-hole and surface mount options PCB retention clip aids manufacturing
3M I/O Connector Mounting Options and Hardware
M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: January 14, 2008 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon
3M Pak 100 Wiremount Plug Series
Pak 100 Wiremount Plug Shrouded to protect against physical and chemical pin damage Open or closed end covers available Optional ejector latches Accepts flat cable or discrete wire Military (with 3518
Product Discontinuation Notice 3M Assorted Japan Sourced Connectors
Product Discontinuation Notice 3M Assorted Japan Sourced Connectors Issue Number: 756 Date: March 26, 2010 Product Discontinuance Effective June 1, 2010, 3M will exit a few assorted low volume Japanese
3M Textool BGA Test & Burn-In Sockets 1.00 mm, Types 0, I, II and III Open Top
Textool BGA Test & Burn-In Sockets 1.00 mm, Types 0, I, II and III Open Top Double-beam normally-closed contact delivers balanced, opposing forces to solder ball with minimal shear stress Contact tips
3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications
3M Boardmount Socket 2 mm x 2 mm Straight Surface Mount, Straight and Right Angle Plated Through-Hole 1502 Series
M Boardmount Socket High Temperature Insulator Reflow Solder ompatible Low height helps minimize PB stack height End Stackable Thru-hole versions are side stackable SMT parts are available in tape and
3M Mini-Clamp Socket 2 mm Boardmount, Straight Solder Tails 372 Series
2 mm Boardmount, Straight Solder Tails 72 Series Compact design saves board space High number of mating cycles Mating latch features provide a reliable interconnection in demanding applications Enables
A Full Range for Different Applications The STG2000 modules offer three different types of IDC circuits. The Network of Networks
The Network of Networks 3M High Density Cross-Connect Modules STG2000 Series The 3M High Density Cross-Connect Modules STG2000 Series are IDC copper cross-connects that can be used in a wide variety of
3M Ribbon Cable Socket and Header, Series 451 & " x.050" (1.27 mm x 1.27 mm)
1 of 8 3M Ribbon Cable Socket and Header, Series 451 & 452.050" x.050" (1.27 mm x 1.27 mm) Product Specification: 78-5102-0091-4 Revised: 05-01-2013 2 of 8 Page Cover Page..... 1 Contents 2 1. Scope......
3M Quick Connect System (QCS) 2814
Communication Markets Division 3M Quick Connect System (QCS) 2814 Designed for your broadband network The 3M Quick Connect System 2814 is a terminal/cross-connect system featuring integrated protection
3M Quick Connect System (QCS) 2811
Communication Markets Division 3M Quick Connect System (QCS) 2811 Designed for your broadband network The 3M Quick Connect System (QCS) 2811 is an insulation displacement connector (IDC) termination system
3M DSLAM Mounting Bracket Kit J0746
3M DSLAM Mounting Bracket Kit J0746 Instructions July 2009 3 Contents 1.0 3M DSLAM Mounting Bracket J0746 - Installation...3 2.0 DSLAM Installation, Nokia...5 3.0 Accessory Kit, Cable Addition Shroud J0747
Product Data Sheet. 3M Active Optical Cable (AOC) Assemblies for CX4 and QSFP+ Applications
78-5102-0126-8 B Product Data Sheet 3M Active Optical Cable (AOC) Assemblies for CX4 and QSFP+ Supersedes: Rev A Page: 1 of 9 Table of Contents 1.0 DESCRIPTION...2 2.0 AOC BLOCK DIAGRAM...2 3.0 CONNECTOR
3M SlimLine 85ohm Cable Assembly
Product Specifications May 2017 78-5102-0240-7, Rev B Scope This document summarizes test methods, test conditions, and product performance requirements for 3M SlimLine 85ohm Cable Assembly. Reference
3M (TM) Ribbon Cable Socket and Header, 451 and 452 Series.050" x.050" (1.27 mm x 1.27 mm)
3M (TM) Ribbon Cable Socket and Header, 451 and 45 Series.050" x.050" (1.7 mm x 1.7 mm) Product Specification: 78-510-0091-4 Revised: 1-6-016 78-510-0091-4 Rev D of 9 Page Cover Page..... 1 Contents 1.
3M 100G QSFP28 Direct Attach Copper Cable Assemblies, 9Q Series
Product Specifications June 2017 78-5102-0262-1, Rev A 3M 100G QSFP28 Direct Attach Copper Cable Assemblies, 9Q Series Scope This document summarizes test methods, test conditions, and product performance
Volition. VF-45 Singlemode Socket and Patch Cords. 3Innovation IT'S AS EASY AS PLUGGING IN AN RJ-45.
Volition VF-45 Singlemode Socket and Patch Cords IT'S AS EASY AS PLUGGING IN AN RJ-45. The Volition VF-45 Singlemode Socket and Patch Cords from 3M are the latest duplex, fiber optic interconnect products
3M I/O Connector Mounting Options and Hardware
M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: July 20, 2009 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn.
General Process Specification for Reflow Soldering of Boardmount 3M Pak Connectors, 3M CF Card Headers and 3M PCMCIA Sockets and Headers
General Process Specification for Reflow Soldering of Boardmount 3M Pak Connectors, 3M CF Card Headers and 3M PCMCIA Sockets and Headers Technical Report November 2004 78-8136-1133-8-A Table of Contents
3M Add-On Terminals 4220P (100, 200, 300 & 400 pairs)
3M Add-On Terminals 4220P (100, 200, 300 & 400 pairs) Instructions August 2011 3 78-8130-2330-1-C 1.0 General 1.1 The 3M Add-On Terminals 4220P-100, 4220P-200, 4220P-300 and 4220P-400 are designed to expand
3M Twin Axial Cable Assembly for Medical Electronics Packaging
3M Electronic Solutions Division 3M Twin Axial Cable Assembly for Medical Electronics Packaging Charlie Staley MEPTEC September 2012 Risers Cards and Extender Cables Sometimes system mechanical configurations
Volition. Multimode VF-45 Socket and Patch Cords. 3Innovation
Volition Multimode VF-45 Socket and Patch Cords It's as easy as plugging in a rj-45. The Volition VF-45 Socket and Patch Cords from 3M are the latest duplex, fiber optic interconnects for affordable, high
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS Quick Reference Guide AMP-LATCH connectors are ribbon cable-to-board devices used to make the transition between ribbon cable and pc board circuitry. They
TCA connectors. ept GmbH & Co. KG I Phone +49 (0) 88 61/ I Fax +49 (0) 88 61/55 07 I I
10 ept GmbH & Co. KG I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de 11 Definitions AdvancedTCA /MicroTCA To give consideration to increasing data traffic and
3M Cross-Connect Cabinet Riser Installation Guide
3M Cross-Connect Cabinet Riser Installation Guide Installing riser in stake, hand hole and pad-mount applications Instructions October 2016 78-0015-3063-9-B 2 October 2016 78-0015-3063-9-B Contents 1.
Volition. Multimode VF-45 Socket and Patch Cords. 3Innovation
Volition Multimode VF-45 Socket and Patch Cords O b D s oc ol e um te en t It's as easy as plugging in a rj-45. The Volition VF-45 Socket and Patch Cords from 3M are the latest duplex, fiber optic interconnects
Mounting Bracket for 8 in. Charles Industries Pedestal for use with 3M Fiber Dome Terminal Closure FDT 08
Mounting Bracket for 8 in. Charles Industries Pedestal for use with 3M Fiber Dome Terminal Closure FDT 08 Instructions October 2006 78-8135-6184-8-A 1.0 Introduction This kit mounts a 3M Fiber Dome Terminal
3M Passive Optical Splitter Shelves and Modules
Communication Markets Division 3M Passive Optical Splitter Shelves and Modules 3M offers a robust portfolio of passive optical fiber splitter products made to enable easy configuration, design, ordering,
CompactPCI PowerConnector
CompactPCI PowerConnector Table of Contents 1 Introduction............................................................. 2 Product Features......................................................... 3 Performance
3M Textool Open-Top Test and Burn-In Sockets for Ball Grid Array Packages
3M Textool Open-Top Test and Burn-In Sockets for Ball Grid Array Packages 3Innovation Table of Contents Product Advantages...1 Durability...1 Reliability...2 Micro-Wiping and Solder Ball Deformation...3
A significantly increased capacity compared to other techniques is achieved with the compact SID-C module.
3 Quante SID System With the SID-C product family, 3M is setting the standard for high-density IDC termination combined with improved handling. The main applications are in telecommunications and data
3M Compact Coarse Wave Division Multiplexer (CCWDM) Module Installation
3M Compact Coarse Wave Division Multiplexer (CCWDM) Module Installation Instructions June 2010 3 Contents 1.0 Introduction...3 2.0 Kit Contents...3 3.0 Preparation and Installation of One and Two 3M Compact
New Product Release Summary for 3M Authorized Sales Reps and Distributors 3M Industrial M12 Wiremount Connectors, 3N104 and 3N304 Series
3M Industrial M12 Wiremount Connectors, 3N104 and 3N304 Series Issue Number: 838 Date: December 12, 2012 Product Description The 3M Industrial M12 Wiremount Connectors are an expansion of 3M s extensive
Model 1100B CHG Terminator. Operating Instructions
Model 1100B CHG Terminator Operating Instructions 1 Contents: 1.0 Safety Information... 3 2.0 General Introduction... 3 3.0 Operation... 4 2.8 2.1 2.7 V 2.2 2.9 2.2 2.10 2.11 2.11 2.3 2.4 2.5 2.5 2.6 2
Edgeboard Connectors, 200 C Burn-In Connectors, Dual Readout
Edgeboard s, 200 C Burn-In s, Dual Readout FEATURES EB4, 0.100" (2.54 mm) C-C; EB6, " (3.17 mm) C-C; EB7 and EB8, 0.156" (3.96 mm) C-C Right angle styles included for all models High temperature, glass
500 Business Center Drive Pittsburgh, PA USA CAGE 1BGJ7. SwitchMaster R5000 Series Ultra-Compact Ganged A/B Switching System
Market Central www.secureswitch.com 500 Business Center Drive Pittsburgh, PA 15205 USA 412.494.2800 CAGE 1BGJ7 SwitchMaster R5000 Series Ultra-Compact Ganged A/B Switching System July, 2014 COMPLETE 2
3M Workstation Monitor Checker CTE701A User s Guide
3M Workstation Monitor Checker CTE701A User s Guide Table of Contents Section Page Intended Use...3 1.0 Quick Tour of your 3M Workstation Monitor Checker CTE701A...4 2.0 Basics...5 3.0 Metal Ground...5
Indoor Protected Entrance Terminal 4588 Series
Indoor Protected Entrance Terminal 4588 Series Instructions Underwriters Laboratories (UL) Listed September 2003 78-8135-1209-8-A 1.0 General The 3M Indoor Protected Entrance Terminal (PET) 4588 Series
3M Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3
3M Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3 User s Guide WSMONITOR1 WSMONITOR2 WSMONITOR3 Table of Contents Section Page SAFETY INFORMATION...3 Introduction...5 Installation...6 Operation...9
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS A concept that is saving your most valuable asset your time. The contact design based on insulation displacement of our RITS (Remote I/O Termination
3M Indoor Protected Building Entrance Terminal (IBET) 4688V Series
3M Indoor Protected Building Entrance Terminal (IBET) 4688V Series Instructions Underwriters Laboratories (UL 348X) Listed February 2017 78-0013-6127-4-B 2 February 2017 78-0013-6127-4-B 1.0 General The
Type Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4. 40 XW2B-40G5 Flat Cable Connectors
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
Catalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
Touch Screen. ClearTek II Capacitive. Product Highlights
ClearTek II Capacitive Touch Screen Product Highlights Excellent light transmission of 91.5% (+/-1.5%) provides vibrant optical characteristics with optimal anti-glare properties Resilient top coat provides
3M Duplex Polishing Machine 6851-E with Universal Dual Holder Instructions
3M Duplex Polishing Machine 6851-E with Universal Dual Holder Instructions Safety Information Read, understand and follow all safety information contained in these user instructions prior to use of the
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
High Speed Backplane Connectors. Catalog Issued 4-05
Catalog 773095 Issued 4-05 2 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is
3M Indoor Protected Building Entrance Terminal 4588V-QCS Series
3M Indoor Protected Building Entrance Terminal 4588V-QCS Series with 3M Quick Connect System 2811 Dry Flame Retardant Block Instructions Underwriters Laboratories (UL 348X) Listed April 2010 3 78-0013-1813-4-A
Dynatel Advanced Modular System 965AMS ADSL2+ Service Module
3 Dynatel Advanced Modular System 965AMS ADSL2+ Service Module User s Guide Future-Proof Testing Platform May 2006 78-8135-5269-8 Contents ADSL2+ Service Module...5 Module Installation...5 Hook-Up...6
G3FM. Model Number Structure. Ordering Information. Solid State Relays. Model Number Legend. List of Models
Solid State Relays CSM DS_E_5_3 100-μA-max. Leakage Current, No Bleeder Resistor Required Reduces wiring work by 60% when combined with the PFY-08- PU Push-In Plus Socket (according to actual OMRON measurements).
Your Solution Partner
Your Solution Partner 1 Short Presentation Elma & Elincom Elma Electronic is a global manufacturer of products for housing electronic systems. The company provides everything from components such as modular
3M Sensored Cable Accessories for Underground Medium Voltage Distribution System
3M Sensored Cable Accessories for Underground Medium Voltage Distribution System 3M Electronics & Energy Business 1 Introduction The focus on enhancing reliability and efficiency of the power grid has
LAN9512 Evaluation Board User Manual
Copyright 2012 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently,
3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series
3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series with 3M Quick Connect System (QCS) 2811 Dry Flame-Retardant Block and RJ-11 Test Ports Instructions Underwriters Laboratories (UL 348X)
TB-100 ControLynx Terminal Block
TB-100 ControLynx Terminal Block TECHNICAL MANUAL Version 1.3 September 2006 Copyright This technical manual and the equipment, firmware and software described herein are copyrighted by INTENT DIGITAL
Setup and Users Manual
Setup and Users Manual TSHARC Octopus Touch Screen Controller Supports 4-, 5- & 8-Wire Analog Resistive Touch Screens RS-232, PS/2, USB Version 1.6R Document Revision and Copyright Document Name: 04B_TSHARC_Octopus1.6Users090827
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
3M Indoor Protected Building Entrance Terminal 4788V-QCS Series
The Network of Networks. 3M Indoor Protected Building Entrance Terminal 4788V-QCS Series with 3M Quick Connect System (QCS) 2811 Dry Flame Retardant Block for Field-Terminated Building Cables Instructions
Dual Component Video Wall Plate 6-RCA AT80COMP6
Dual Component Video Wall Plate 6-RCA AT80COMP6 User Manual www.atlona.com TABLE OF CONTENTS 1. Introduction 2 2. Applications 2 3. Specifications 2 4. Installation 2 5. Safety Information 3 6. Warranty
Standard Products Assembly Equipment Table 3M Electronic Products Division
Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector
FLAT FLEXIBLE CABLE (FFC) CONNECTORS
FLAT FLEXIBLE CABLE (FFC) CONNECTORS TE Connectivity s (TE) family of FFC connectors includes a variety of high density cable-to-board and cable-to-cable connectors designed for automated assembly. The
Product Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
Sierra 80 Volt Brushless DC Motor Controller Product Specification
Sierra 80 Volt Brushless DC Motor Controller Product Specification Assembly 025F0135 600A0588 Rev. B January 29, 2010 025F0135 Brushless DC Motor Controller Page 1 Revision History ECN # Date Rev Description
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
3M SLiC Fiber Splicing Workstation with Cleaver Arm
3M SLiC Fiber Splicing Workstation with Cleaver Arm Terminal Closure 530 Closures 533, 547 and 733 Instructions September 2016 78-8135-7148-2-D 2 September 2016 78-8135-7148-2-D 1.0 General 1.1 The 3M
Atlona 1 by 4 HDMI Distribution Amplifier
Atlona 1 by 4 HDMI Distribution Amplifier AT-HD-V14 User Manual TABLE OF CONTENTS 1. Introduction... 1 2. Features... 1 3. Package Contents... 2 4. Specifiations... 2 5. Panel Descriptions... 3 6. Hardware
AtlonA. 1x4 HDMI v1.3 Distribution Amplifier MODELS: AT-HD-V14. User Manual
AtlonA 1x4 HDMI v1.3 Distribution Amplifier User Manual MODELS: AT-HD-V14 TABLE OF CONTENTS 1. Introduction... 1 3. Specifications & Package Contents... 2 4. Panel Descriptions... 3 5. Hardware Installation...
E2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E_6_ Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s
3M PURPLE CLEAN SANDING HOOKIT ABRASIVE DISC
3M PURPLE CLEAN SANDING HOOKIT ABRASIVE DISC Data Sheet Document Control 3M Part No.(s) 3M PRODUCT I.D. 740I or 745I for grades P40 - P80 734U P80 - P180 334U P220 - P800 3M Part Descriptor(s) Select grades
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
E2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s also
Brushless DC Motor Controller Specification Assembly 025A0053
Brushless DC Motor Controller Specification Assembly 025A0053 600A0053 Rev. 2 July 28, 2004 025A0053 Brushless DC Motor Controller Data Sheet Page 1 Revision History Date Rev Description By 5/15/04 1 Initial
Conductive Pressure Sensitive Cover Tape 2666
3 Conductive Pressure Sensitive Cover Tape 2666 Technical Data January, 2007 Product Description 3M Conductive Pressure Sensitive Cover Tape 2666 is a transparent, conductive polyester film tape with a
Volition. Modular Managed Switch. 3Innovation ETHERNET/FAST ETHERNET/GIGABIT ETHERNET
Volition Modular Managed Switch ETHERNET/FAST ETHERNET/GIGABIT ETHERNET Revolutionary and robust, the Volition VOL-5000 modular switch from 3M provides the high-speed interconnection needed by organizations
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
3M Sun Control Window Films. Prestige Series. Prestige. Clearly Superior Window Films. for Clearly Superior Homes
Prestige 3M Sun Control Window Films Prestige Series Clearly Superior Window Films for Clearly Superior Homes Prestige Reflectivity that s actually lower than glass Unlike traditional window films that
E2EY. A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Aluminum-detecting Proximity Sensor
Aluminum-detecting Proximity Sensor EEY CSM_EEY_DS_E_5_1 A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Non-ferrous metals, such as aluminum and brass, are detected.
EVB-USB2250 User Manual Revision B
Copyright 2009 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently,
XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
Sensing method Appearance Connection method Sensing distance Model. Pre-wired (2 m) Power supply Application Appearance Function Model
Small Spot/Mark (Separate Amplifier) EC-VS/VM CSM_EC-VS/VM_DS_E_6_ Extremely thin beam ideal for detection of minute objects and marks Ideal for detection of small objects and slight color differences
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
3M Ground Master Equipment Ground Monitor Models CTC065-RT and CTC065-5 User s Guide
3M Ground Master Equipment Ground Monitor Models CTC065-RT and CTC065-5 User s Guide Table of Contents Section Page Safety Statements...3 Intended Use...3 Specifications...4 Controls and Indicators...5
3 710 Splicing System 1
3 710 Splicing System 1 3M 710 Splicing System Modules are available for straight, half-tap and bridge splicing Several splice module configurations allow multiple options when designing a communications
Connecting Sockets, Mounting Brackets, DIN Rails
Connecting Sockets, Mounting Brackets, DIN Rails CSM_ConnectionSocket_DS_E_3_1 Durable, Easy-to-handle Connecting Sockets and Mounting Brackets Highly reliable Track-mounted and Back-connecting Sockets
Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
USB 3.0 Spectra
USB 3.0 Spectra 3001-15 1-Port USB 3.0 15m Active Extension Cable User Guide Thank you for purchasing the Icron USB 3.0 Spectra 3001-15. Please read this guide thoroughly. This document applies to Part
Hardware Specification Revision 2.2 ECN 1. Revision 1.0 June 13, 2005
-1 Hardware Specification Revision 2.2 ECN 1 Revision 1.0 June 13, 2005 IMPORTANT INFORMATION Copyright Copyright 1997-2005 PXI Systems Alliance. All rights reserved. This document is copyrighted by the
Dynatel.Advanced.Modular.System. 965AMS.VDSL2.Service.Module.
3 Dynatel.Advanced.Modular.System. 965AMS.VDSL2.Service.Module. User s.guide Future-Proof Testing Platform October 2007 78-8135-7673-9 Contents VDSL2 Service Module...5 Introduction...5 Module Installation...6
EVB-USB2640 Evaluation Board Revision A
Copyright 2008 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently,
Type Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4 40 XW2B-40G5 *1 50 XW2B-50G5 60 XW2B-60G5 40 XW2B-40G5-T
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
E2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
CK3W-PD048 CSM_CK3W-PD048_DS_E_DITA_1_2
CK3W Power Supply Unit CK3W-PD048 CSM_CK3W-PD048_DS_E_DITA_1_2 Supplies power to the CK3M Controller CK3W-PD048 Features 24 VDC input The power supply status indicator shows operating status 1 Ordering
MEC-USB-M002. User s Manual
MEC-USB-M002 Mini PCI-e 2-port USB 3.0 board User s Manual Third Edition, February 2014 2014 Cervoz Co., Ltd. All rights reserved. Reproduction without permission is prohibited Mini PCI-e USB Card User