OXY5638B Intel Broadwell-U EPIC SBC

Transcription

1 Version 1.4 Revision Date: Oct User's Manual OXY5638B Intel Broadwell-U EPIC SBC

2 Safety Information 1. Electrical safety To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit. Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your local distributor. 2. Operation safety Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry. Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet. Place the product on a stable surface. If you encounter any technical problems with the product, contact your local distributor Statement All rights reserved. No part of this publication may be reproduced in any form or by any means, without prior written permission from the publisher. All trademarks are the properties of the respective owners. All product specifications are subject to change without prior notice 1

3 Revision History Revision Date(yyyy/mm/dd) Changes /03/14 Initial release /06/19 Update block diagram Update JUSB, LVDS_PWR, LAN12 and COM1 pin define Add connector P/N /06/30 Add Section 2.2 Onboard and mating connector types /07/05 Add LAN2 description /10/26 DP connector type changed. SW1 removed. Add JP2708 mpcie_2 signal jumper. Packing list OXY5638B EPIC SBC CD (Driver + user's manual) Optional Accessories Cable Kits If any of the above items is damaged or missing, please contact your local distributor. 2

4 Table of Contents Safety Information Electrical safety Operation safety... 1 Statement... 1 Revision History... 2 Packing list... 2 Optional Accessories... 2 Table of Contents... 3 Chapter 1: Product Information Block Diagram Key Features Board Placement... 9 Chapter 2: Jumpers and Connectors Jumpers and connectors list Onboard and mating connector types Jumper Setting JP1901: LVDS Resolution JP1902: LVDS +5V/+3.3V Voltage Select JP1903: LVDS Backlight Control JP2701: COM1 Voltage Select JP2702: COM2 Voltage Select JP2703: COM3 Voltage Select JP2704: COM4 Voltage Select JP2707: LVDS Backlight +5V/+3.3V Voltage Select JP2708: mpcie 2 signal selection JCMOS: CMOS Clear Connector DCIN: DC-IN +12V AUDIO AUDIO BAT LPC SATA SATA SATA_PWR DIO DIO

5 COM1 : RS232/422/485 Select in BIOS COM2 : RS COM3 : RS COM4 : RS USB USB JUSB LVDS LVDS_PWR LAN LAN_LED SIM_CARD SIM_CARD MINI_PCIE MINI_PCIE2 (support msata) FP1: HDD LED/Power LED/Reset BTN/Power BTN DP CPUFAN DIMMA: 240-pin XR-DIMM Slot DIMMB: 240-pin XR-DIMM Slot STACKPC: Connector A Top Chapter 3: AMI BIOS UTILITY Starting Navigation Keys Main Menu Advanced Menu CPU Configuration Trust Computing ACPI Setting AMT Setting IT8786 Super IO Configuration Serial Port 1 Configuration Serial Port 2 Configuration Serial Port 3 Configuration Serial Port 4 Configuration Hardware Monitor F81216SEC Super IO Configuration SATA Configuration

6 3.4.9 USB Configuration Intel I218-LM Ethernet Controller NIC Configuration Intel I210-IT Ethernet Controller NIC Configuration Chipset Menu System Agent (SA) Configuration Graphics Configuration LCD Control Memory Configuration PCH-IO Configuration PCH Azalia Configuration BIOS Security Configuration Restore AC Power Loss Wake on LAN (I218) Security Menu Boot Menu Boot Option Save & Exit

7 Chapter 1: Product Information 1.1 Block Diagram LVDS 2x15 pin LVDS CH7511B DP 2x20 pin DDR3L 1333/1600 XR-DIMM edp DDI DDR3L nanossd 64GB SATA PCIe x1 i218-lm LAN 2x15 pin SATA Connector SATA PCIe x1 SATA PCIe x1 USB 2.0 i210-it mpcie/msata Audio ALC888 HDA 1 x 10 pin Codec PCIe x1 mpcie USB 2.0 Broadwell-U COM1 RS232/422/485 UART1 IT8786E Super IO FCBGA x24mm PCIe x1 PEX8606 PCIe x4 4 x PCIe x1 PCIe/104 (Stack PC) COM2 2x5 pin RS232 UART2 USB 2.0 USB 2x5 pin COM3 2x5 pin RS232 UART3 USB 2.0 USB 2x5 pin COM4 2x5 pin RS232 UART4 USB 2.0 USB 3.0 USB 3.0 2x10 pin 6

8 1.2 Key Features System CPU Type Memory Type NAND Drive BIOS Watchdog Expansion Intel Core TM i3-5010u (3M Cache, up to 2.10GHz, 15W) Intel Core TM i5-5350u (3M Cache, up to 2.90GHz, 15W) Intel Core TM i7-5650u (4M Cache, up to 3.20GHz, 15W) 2 x XR-DIMM up to 16 GB 64 GB SATA NAND Onboard AMI UEFI BIOS sec. or min. software programmable Can generate system reset PCIe104 (StackPC): 1 x PCIe_4, 4 x PCIe_1 2 x mpcie (1 with msata supported) Display Chipset Intel HD Graphics LVDS Dual Channel 24-bit LVDS Display Type LVDS, DP Audio Codec Realtek ALC888S High Definition Audio Codec Ethernet Chipset 1 x Intel I210-IT 1 x Intel I218-LM WOL Yes Boot from LAN Yes for PXE NOTICE: If you need hot plug function, please disable ULP function of I218-LM,. ULP Disable.pdf file could be found in LAN folder of Driver CD. Internal I/O SATA 2 x SATAIII COM 3 x RS232 with 5V/12V selection 1 x RS232/422/485 with 5V/12V selection Ethernet 2 USB USB SIM card holder 2 DIO 2 LPC 1 DisplayPort 1 for 2 DisplayPort output LVDS 1 Audio 2 x (1 x 10)pin for Line-out, Line-in, 2 x Mic-in(optional) Mechanical and Environment Form Factor EPIC SBC Power Type 12V DC-in Dimension 180 mm x 115 mm Operating Temp. -40 to 85 C Storage Temp. -40 to 85 C 7

9 Relative Humidity 10% to 90%, non-condensing *All specifications and photos are subject to change without notice. 8

10 1.3 Board Placement 9

11 Chapter 2: Jumpers and Connectors 2.1 Jumpers and connectors list Label JP1901 JP1902 JP1903 JP2701 JP2702 JP2703 JP2704 JP2707 JP2708 JCMOS DCIN AUDIO1 AUDIO BAT1 LPC SATA1 SATA2 SATA_PWR COM1 COM2 COM3 COM4 DIO1 DIO2 USB45 USB67 JUSB1 LVDS LVDS_PWR LAN12 LAN_LED MINI_PCIE1 MINI_PCIE2 SIM_CARD1 Function LVDS Resolution LVDS Voltage LVDS Backlight Control COM1 RI-/+5V/+12V Selection COM2 RI-/+5V/+12V Selection COM3 RI-/+5V/+12V Selection COM4 RI-/+5V/+12V Selection Backlight Control Power mpcie 2 signal selection CMOS Clear 4P Power Input Connector Mic, Line-in Mic, Line-in, Line-out Battery connector LPC SATAIII connector SATAIII connector SATA Power RS232/422/485 RS232 RS232 RS232 8-bit DIO 8-bit DIO 2 x USB2.0 2 x USB2.0 2 x USB bit LVDS LVDS Power 2 x GbE LAN LAN LED Full-size mpcie slot Full-size mpcie/msata slot Standard SIM card holder 10

12 SIM_CARD2 FP1 DP CPUFAN DIMMA DIMMB STACKPC Standard SIM card holder Front Panel 2 x DisplayPort CPU Fan 240-pin XR-DIMM Slot 240-pin XR-DIMM Slot PCIe/104 Connector Top 2.2 Onboard and mating connector types Connector Onboard Connector Mating Connectors/Cables Manufacturer Type Number Manufacturer Type Number DCIN PHOENIX PHOENIX LPC YIMTEX 501MW1*10ST-1R MOLEX SATA_PWR PINREX TW00 Perfectron Cable 0C L (200mm) 0C L MOLEX COM1, COM2, YIMTEX 501MW1*10ST-1R Perfectron Cable COM3, COM4 0C L (DB9, 150mm) AUDIO1, AUDIO YIMTEX 501MW1*10ST-1R MOLEX DIO1, DIO2 PINREX GB00 JST PHDR-10VS MOLEX USB45, USB67 PINREX TWE0 Perfectron Cable (100mm) 0C50200YBW1611EL JUSB1 PINREX 52X-40-20GU52 Perfectron Cable 0C50200YBW1611DL (150mm) LVDS ACES ACES LVDS_PWR PINREX TWE0 MOLEX LAN12 MOLEX MOLEX LAN_LED YIMTEX 501MW1*10ST-1R MOLEX FP1 PINREX GBE2 JST PHDR-10VS DP MOLEX MOLEX CPUFAN FOXCONN HF2704E-M1 AMP

13 2.3 Jumper Setting JP1901: LVDS Resolution HA (Pixel) VA (Line) Color depth Channel Jumper 1-2 Jumper 3-4 Setting Jumper 5-6 Jumper bit Single Shorted Shorted Shorted Shorted Drawing bit Single Shorted Shorted Shorted Opened bit Single Shorted Shorted Opened Shorted bit Single Shorted Shorted Opened Opened bit Dual Shorted Opened Shorted Shorted bit Single Shorted Opened Shorted Opened bit Dual Shorted Opened Opened Shorted bit Dual Shorted Opened Opened Opened JP1902: LVDS +5V/+3.3V Voltage Select Jumper Function description Setting V V Default setting: 2-3 JP1903: LVDS Backlight Control PIN DEFINITION 1 GND 2 Backlight UP 3 Backlight Down 4 GND 12

14 JP2701: COM1 Voltage Select JP2702: COM2 Voltage Select JP2703: COM3 Voltage Select JP2704: COM4 Voltage Select PIN DEFINITION PIN DEFINITION 1 COM1_RI- 2 COMP9SEL 3 +5VS 4 COMP9SEL 5 12V 6 COMP9SEL Default setting: 1-2 JP2707: LVDS Backlight +5V/+3.3V Voltage Select Jumper Function description Setting V V Default setting: 1-2 JP2708: mpcie 2 signal selection Jumper Function description Setting 1-2 msata 2-3 mpcie Default setting:

15 JCMOS: CMOS Clear Jumper Function description Setting 1-2 Default 2-3 Clear CMOS 14

16 2.4 Connector DCIN: DC-IN +12V [Phoenix ] PIN DEFINITION 1 +VIN 2 +VIN 3 GND 4 GND AUDIO1 [YIMTEX 501MW1*10ST-1R] 1 x 10 pin, pitch = 1.25 mm PIN DEFINITION 1 GND 2 MIC2_JD 3 MIC2_R 4 MIC2_L 5 N/A 6 N/A 7 N/A 8 LINE2_JD 9 LINE2_R 10 LINE2_L AUDIO [YIMTEX 501MW1*10ST-1R] 1 x 10 pin, pitch = 1.25 mm PIN DEFINITION 1 GND 2 MIC1_JD 3 MIC1_R 4 MIC1_L 5 FRONT_JD 6 FRONT_R 7 FRONT_L 8 LINE1_JD 9 LINE1_R 10 LINE1_L 15

17 BAT1 [PINREX TWR0] PIN DEFINITION 1 1 GND 2 +3v LPC [YIMTEX 501MW1*10ST-1R] 1 x 10 pin, pitch = 1.25 mm PIN DEFINITION 1 GND 2 TPM_IRQ VSB 4 LPC_AD0 5 LPC_AD1 6 LPC_AD2 7 LPC_AD3 8 LPC_FRAME# 9 PLTRST#_BUF1 10 LPC_CLK_1 SATA1 SATA2 PIN DEFINITION 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND 16

18 SATA_PWR [PINREX TW00] PIN DEFINITION 1 +5V 2 GND 3 GND 4 +12V DIO1 [PINREX GB00] 2 x 5 pin, pitch = 2 mm, 2 mm PIN DEFINITION PIN DEFINITION 1 DIO0 2 DIO1 3 DIO2 4 DIO3 5 DIO4 6 DIO5 7 DIO6 8 DIO7 9 +5V 10 GND DIO2 [PINREX GB00] 2 x 5 pin, pitch = 2 mm, 2 mm PIN DEFINITION PIN DEFINITION 1 DIO8 2 DIO9 3 DIO10 4 DIO11 5 DIO12 6 DIO13 7 DIO14 8 DIO V 10 GND 17

19 COM1 : RS232/422/485 Select in BIOS [YIMTEX 501MW1*10ST-1R] 1 x 10 pin, pitch = 1.25 mm PIN DEFINITION Mode RS232 RS422 RS V +5V +5V 2 Ground Ground Ground 3 RI(Default)/+5V/+12V 4 DTR- RXD- 5 CTS- 6 TXD RXD+ 7 RTS- 8 RXD TXD+ D+ 9 DSR- 10 DCD- TXD- D- COM2 : RS232 COM3 : RS232 COM4 : RS232 [YIMTEX 501MW1*10ST-1R] 1 x 10 pin, pitch = 1.25 mm PIN DEFINITION 1 +5V 2 Ground 3 RI(Default)/+5V/+12V 4 DTR- 5 CTS- 6 TXD 7 RTS- 8 RXD 9 DSR- 10 DCD- 18

20 USB45 [PINREX TWE0] 1 x 10 pin, pitch = 1.25 mm PIN DEFINITION 1 +5V 2 USB4_D- 3 USB4_D+ 4 Ground 5 Ground 6 +5V 7 USB5_D- 8 USB5_D+ 9 Ground 10 Ground USB67 [PINREX TWE0] 1 x 10 pin, pitch = 1.25 mm PIN DEFINITION 1 +5V 2 USB6_D- 3 USB6_D+ 4 Ground 5 Ground 6 +5V 7 USB7_D- 8 USB7_D+ 9 Ground 10 Ground 19

21 JUSB1 [PINREX 52X-40-20GU52] PIN DEFINITION PIN DEFINITION 1 +5V_UBS0 11 USB1_D+ 2 USB3_P1_RX_N 12 USB1_D- 3 USB3_P1_RX_P 13 GND 4 GND 14 USB3_P2_TX_P 5 USB3_P1_TX_N 15 USB3_P2_TX_N 6 USB3_P1_TX_P 16 GND 7 GND 17 USB3_P2_RX_P 8 USB0_D- 18 USB3_P2_RX_N 9 USB0_D V_UBS1 10 id LVDS [ACES ] # Mated with [ACES ] PIN DEFINITION PIN DEFINITION 1 LVDS_BCLK 2 GND 3 LVDS_BCLK# 4 LVDS_A3 5 GND 6 LVDS_A3# 7 LVDS_B3 8 GND 9 LVDS_B3# 10 LVDS_ACLK 11 LVDS_B2 12 LVDS_ACLK# 13 LVDS_B2# 14 GND 15 LVDS_B1 16 LVDS_A2 17 LVDS_B1# 18 LVDS_A2# 19 LVDS_B0 20 LVDS_A1 21 LVDS_B0# 22 LVDS_A1# 23 GND 24 LVDS_A0 25 LVDS_DDC_SC 26 LVDS_A0# 27 LVDS_DDC_SD 28 GND 29 LVDS_VDD 30 LVDS_VDD 20

22 LVDS_PWR [PINREX TWE0] 1 x 10 pin, pitch = 1.25 mm PIN DEFINITION 1 VCC12_LVDSP 2 VCC12_LVDSP 3 VCC12_LVDSP 4 VCC_LVDSP 5 VCC_LVDSP 6 GND 7 GND 8 Backlight Enable 9 Backlight Control 10 GND LAN12 [MOLEX ] # Mated with [MOLEX ] PIN DEFINITION PIN DEFINITION 1 LAN2_MDI0_DP 2 LAN1_MDI0_DP 3 LAN2_MDI0_DN 4 LAN1_MDI0_DN 5 LAN2_MDI1_DP 6 LAN1_MDI1_DP 7 LAN2_MDI1_DN 8 LAN1_MDI1_DN 9 LAN2_MDI2_DP 10 LAN1_MDI2_DP 11 LAN2_MDI2_DN 12 LAN1_MDI2_DN 13 LAN2_MDI3_DP 14 LAN1_MDI3_DP 15 LAN2_MDI3_DN 16 LAN1_MDI3_DN 17 Ground 18 Ground 19 LAN2_1.5V 20 LAN1_1V 21 LAN2_ACT 22 LAN1_ACT VMLAN VMLAN 25 LAN2_LED_ LAN1_LED_ LAN2_LED_ LAN1_LED_ Ground 30 Ground

23 LAN_LED [YIMTEX 501MW1*10ST-1R] 1 x 10 pin, pitch = 1.25 mm PIN DEFINITION 1 GND 2 LAN2_LED_100# 3 LAN2_LED_1000# 4 LAN2_ACT# VMLAN 6 GND 7 LAN1_LED_100# 8 LAN1_LED_1000# 9 LAN1_ACT# VMLAN SIM_CARD1 SIM_CARD2 [ASTRON R] PIN DEFINITION 1 VCC 2 RESET 3 CLOCK 4 GND 5 VPP 6 DATA 22

24 MINI_PCIE1 MINI_PCIE2 (support msata) [ACES M] PIN DEFINITION PIN DEFINITION 1 WAKE# VAUX 3 NC 4 GND 5 NC V 7 CLKREQ# 8 UIM_PWR 9 GND 10 UIM_DATA 11 REFCLK- 12 UIM_CLK 13 REFCLK+ 14 UIM_RESET 15 GND 16 UIM_VPP 17 Reserved 18 GND 19 Reserved 20 W_Disable# 21 GND 22 PERST# 23 PERn VAUX 25 PERp0 26 GND 27 GND V 29 GND 30 SMB_CLK 31 PETn0 32 SMB_DATA 33 PETp0 34 GND 35 GND 36 USB_D- 37 GND 38 USB_D VAUX 40 GND VAUX 42 LED_WWAN# 43 GND 44 LED_WLAN# 45 Reserved 46 LED_WPAN# 47 Reserved V 49 Reserved 50 GND 51 Reserved VAUX FP1: HDD LED/Power LED/Reset BTN/Power BTN [PINREX GBE2] 2 x 5 pin, pitch = 2 mm, 2 mm PIN DEFINITION PIN DEFINITION 1 HDLED+ 2 PLED+ Plug LED cable to FP1 pin header 3 HDLED- 4 PLED- HDD Active LED: plug 1-3 pin 5 GND 6 EC_PWR_BTN Power LED: plug 2-4 pin 7 RSTBTN# 8 GND Power Button: plug 6-8 pin 9 23

25 DP [MOLEX ] # Mated with [MOLEX ] PIN DEFINITION PIN DEFINITION 1 GND 2 GND 3 DP1_LANEP0 4 DP2_LANEP0 5 DP1_LANEN0 6 DP2_LANEN0 7 GND 8 GND 9 DP1_LANEP1 10 DP2_LANEP1 11 DP1_LANEN1 12 DP2_LANEN1 13 GND 14 GND 15 DP1_LANEP2 16 DP2_LANEP2 17 DP1_LANEN2 18 DP2_LANEN2 19 GND 20 GND 21 DP1_LANEP3 22 DP2_LANEP3 23 DP1_LANEN3 24 DP2_LANEN3 25 GND 26 GND 27 OB_AUX1_EN_N 28 OB_AUX2_EN_N 29 GND 30 GND 31 DP1_AUXP 32 DP2_AUXP 33 DP1_AUXN 34 DP2_AUXN 35 GND 36 GND 37 DP1_DET 38 DP2_DET 39 DP1_PWR 40 DP2_PWR CPUFAN [FOXCONN HF2704E-M1] PIN DEFINITION 1 CPUFAN_PWN 2 CPUFAN_IO 3 CPUFAN_VCC 4 GND 24

26 DIMMA: 240-pin XR-DIMM Slot [SAMTEC BTH L-D-A] DIMMB: 240-pin XR-DIMM Slot [SAMTEC BTH L-D-A] PIN DEFINITION PIN DEFINITION PIN DEFINITION PIN DEFINITION PIN DEFINITION PIN DEFINITION 1 VSS 41 DQ16 81 VSS 121 CK1 161 DQS4# 201 VSS 2 VSS 42 VSS 82 DM8 122 A1 162 VSS 202 DQ55 3 VSS 43 DQ17 83 DQS8# 123 CK1# 163 DQS4 203 DQ50 4 VSS 44 VREFDQ 84 VSS 124 VDD 164 DM4 204 VSS 5 DQ0 45 VSS 85 DQS8 125 VDD 165 VSS 205 DQ51 6 DQ4 46 NC(TEST) 86 CB6 126 CK0 166 VSS 206 DQ60 7 DQ1 47 DQS2# 87 VSS 127 VREFCA 167 DQ VSS 8 DQ5 48 VSS 88 CB7 128 CK0# 168 DQ DQ61 9 VSS 49 DQS2 89 CB2 129 PAR_IN 169 DQ DQ56 10 VSS 50 DM2 90 VSS 130 VDD 170 DQ VSS 11 DQS0# 51 VSS 91 CB3 131 VDD 171 VSS 211 DQ57 12 DM0 52 VSS 92 RESET# 132 EVENT# 172 VSS 212 DM7 13 DQS0 53 DQ18 93 VSS 133 A DQ VSS 14 VSS 54 DQ22 94 ERR_OUT# 134 A0 174 DQ VSS 15 VSS 55 DQ19 95 VTT 135 BA0 175 DQ DQS7# 16 DQ6 56 DQ23 96 VTT 136 VDD 176 DQ DQ62 17 DQ2 57 VSS 97 CKE0 137 VDD 177 VSS 217 DQS7 18 DQ7 58 VSS 98 CKE1 138 BA1 178 VSS 218 DQ63 19 DQ3 59 DQ24 99 VDD 139 WE# 179 DQS5# 219 VSS 20 VSS 60 DQ VDD 140 VDD 180 DM5 220 VSS 21 VSS 61 DQ BA2 141 CAS# 181 DQS5 221 DQ58 22 DQ12 62 DQ A RAS# 182 VSS 222 VDD_SPD 23 DQ8 63 VSS 103 VDD 143 VDD 183 VSS 223 DQ59 24 DQ13 64 VSS 104 A S0# 184 DQ SA0 25 DQ9 65 DQS3# 105 A S1# 185 DQ VSS 26 VSS 66 DM3 106 VDD 146 VDD 186 DQ SA1 27 VSS 67 DQS3 107 A7 147 ODT1 187 DQ SA2 28 DM1 68 VSS 108 A ODT0 188 VSS 228 SCL 29 DQS1# 69 VSS 109 VDD 149 VDD 189 VSS 229 VSS 30 VSS 70 DQ A9 150 A DQ SDA 31 DQS1 71 DQ A5 151 S3# 191 DQ SATA_TX0 32 DQ14 72 DQ VDD 152 VDD 192 DQ VSS 33 VSS 73 DQ A4 153 VSS 193 DQ SATA_TX0# 34 DQ15 74 VSS 114 A8 154 S2# 194 VSS 234 SATA_TX1# 35 DQ10 75 VSS 115 VDD 155 DQ VSS 235 VSS 36 VSS 76 CB4 116 A6 156 VSS 196 DM6 236 SATA_TX1 37 DQ11 77 CB0 117 A2 157 DQ DQS6# 237 VTT 38 DQ20 78 CB5 118 VDD 158 DQ VSS 238 VSS 39 VSS 79 CB1 119 VDD 159 VSS 199 DQS6 239 VTT 40 DQ21 80 VSS 120 A3 160 DQ DQ VTT 25

27 STACKPC: Connector A Top [SAMTEC ASP ] PIN DEFINITION PIN DEFINITION PIN DEFINITION PIN DEFINITION PIN DEFINITION PIN DEFINITION 1 USB_OC#6 2 BUF_PLT_RST- 53 3V3_DU 54 3V3_DU 105 GND 106 CLK_LPC_UART 3 3.3V 4 3.3V 55 3V3_DU 56 GND 107 NC 108 GND 5 USBD7+ 6 USBD6+ 57 ST_LAN1_MDIP0 58 NC 109 ST_LAN1_MDIP USBD7-8 USBD6-59 ST_LAN1_MDIN0 60 NC 111 ST_LAN1_MDIN GND 10 GND 61 GND 62 GND 113 GND 114 GND 11 PCIE_TXP5 12 PCIE_TXP7 63 ST_LAN2_MDIP0 64 NC 115 ST_LAN2_MDIP PCIE_TXN5 14 PCIE_TXN7 65 ST_LAN2_MDIN0 66 NC 117 ST_LAN2_MDIN GND 16 GND 67 GND 68 GND 119 GND 120 GND 17 PCIE_TXP6 18 PCIE_TXP8 69 ST_LAN1_MDIP1 70 NC 121 ST_LAN1_MDIP PCIE_TXN6 20 PCIE_TXN8 71 ST_LAN1_MDIN1 72 NC 123 ST_LAN1_MDIN GND 22 GND 73 GND 74 GND 125 GND 126 GND 23 PCIE_RXP5 24 PCIE_RXP7 75 ST_LAN2_MDIP1 76 NC 127 ST_LAN2_MDIP3 128 ST_LAN2_MDIP3 25 PCIE_RXN5 26 PCIE_RXN7 77 ST_LAN2_MDIN1 78 NC 129 ST_LAN2_MDIN3 130 ST_LAN2_MDIN3 27 GND 28 GND 79 ST_LAN2_ACT# 80 ST_LAN1_ACT# 131 PE_PRSNT1_A- 132 PE_PRSNT0_A 29 PCIE_RXP6 30 PCIE_RXP8 81 SATATXP5 82 SATATXP4 133 SATSRXP5 134 SATARXP5 31 PCIE_RXN6 32 PCIE_RXN8 83 SATATXN5 84 SATATXN4 135 SATSRXN5 136 SATARXN5 33 GND 34 GND 85 GND 86 GND 137 GND 138 GND 35 PEX5_PCIE_CLK 36 PEX7_PCIE_CLK 87 USBD9+ 88 USBD NC PEX5_PCIE_CLK# 38 PEX7_PCIE_CLK# 89 USBD9-90 USBD NC V_DU 40 5V_DU 91 GND 92 GND 143 GND 144 GND 41 PEX6_PCIE_CLK 42 PEX8_PCIE_CLK 93 NC 94 USBD LPC_AD0 146 LPC_LDRO0 43 PEX6_PCIE_CLK# 44 PEX8_PCIE_CLK# 95 NC 96 USBD LPC_AD1 148 INT_SERIRQ 45 GND 46 5VS 97 GND 98 GND 149 GND 150 GND 47 SMB_DATA_MAIN 48 NC 99 ETH_1_CTREF 100 ETH_0_CTREF 151 LPC_AD2 152 LPC_FRAME 49 SMB_CLK_MAIN 50 NC 101 SPI_MISO_AA 102 SPI_CE0#_F 153 LPC_AD3 154 VRTC 51 SMBALERT# 52 BUS_PS_ON# 103 SPI_SI_F 104 SPI_CE1#_F 155 FUSB_1RTS- 156 FUSB_ORTS 26

28 Chapter 3: AMI BIOS UTILITY This chapter provides users with detailed descriptions on how to set up a basic system configuration through the AMI BIOS setup utility. 3.1 Starting To enter the setup screens, perform the following steps: Turn on the computer and press the <Del> key immediately. After the <Del> key is pressed, the main BIOS setup menu displays. Other setup screens can be accessed from the main BIOS setup menu, such as the Chipset and Power menus. 3.2 Navigation Keys The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process. Some of the hot keys are <F1>, <F10>, <Enter>, <ESC>, and <Arrow> keys. Some of the navigation keys may differ from one screen to another. Left/Right The Left and Right <Arrow> keys moves the cursor to select a menu. Up/Down The Up and Down <Arrow> keys moves the cursor to select a setup screen or sub-screen. + Plus/Minus The Plus and Minus <Arrow> keys changes the field value of a particular setup setting. Tab The <Tab> key selects the setup fields. F3 The <F3> key load optimized defaults. F4 The <F4> key saves any changes made and exits the BIOS setup utility. Esc The <Esc> key discards any changes made and exits the BIOS setup utility. Enter The <Enter> key displays a sub-screen or changes a selected or highlighted option in each menu. 27

29 3.3 Main Menu The Main menu is the first screen that you will see when you enter the BIOS Setup Utility. 28

30 3.4 Advanced Menu The Advanced Menu allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. Setting incorrect field values may cause the system to malfunction. 29

31 3.4.1 CPU Configuration This page allows you to configure CPU menu. 30

32 3.4.2 Trust Computing ACPI Setting 31

33 3.4.4 AMT Setting IT8786 Super IO Configuration 32

34 Serial Port 1 Configuration Serial Port 2 Configuration 33

35 Serial Port 3 Configuration Serial Port 4 Configuration 34

36 3.4.6 Hardware Monitor F81216SEC Super IO Configuration * To use this function should stacked with SK

37 3.4.8 SATA Configuration USB Configuration 36

38 Intel I218-LM Ethernet Controller NIC Configuration 37

39 Intel I210-IT Ethernet Controller NIC Configuration 38

40 3.5 Chipset Menu System Agent (SA) Configuration 39

41 Graphics Configuration LCD Control 40

42 Memory Configuration PCH-IO Configuration 41

43 PCH Azalia Configuration BIOS Security Configuration 42

44 Restore AC Power Loss Wake on LAN (I218) 43

45 3.6 Security Menu Use the Security Menu to establish system passwords Administrator Password Set administrator password. User Password Set user Password. 44

46 3.7 Boot Menu This section is used to configure the boot features Boot Option 45

47 3.8 Save & Exit 46