SPRING-LOADED CONNECTORS
|
|
|
- Maurice Small
- 5 years ago
- Views:
Transcription
1 SPRING-LODED CONNECTORS SERIES 811 & 813 GRID SURFCE MOUNT, LOW PROFILE SINGLE ND DOULE ROW STRIPS SINGLE ROW Series 811 Number of Pins X 1,8 Modular contacts for use on grid, available in five heights from 3,48 to 5,99, supplied in single and double row contact strips Pistons have a long stroke relative to the low profile of the assembly oth 811 & 813 series, contact styles 1 through 4, are available on 32mm wide carrier tape and fitted with vacuum pick-up clips for automated pick and place assembly. Tape and Reel packaging per EI-481. See page 12 for strip lengths available and ordering information ORDERING INFORMTION Specify number of contacts Single Row Series XX-30-00X101 Double Row Series XX-30-00X101 Specify number of contacts For 811 and 813 Tape & Reel packaging, see page 12 Style 0 only DOULE ROW Series 813 Number of Pins X / 2 CONTCT STYLE INITIL HEIGHT 3,48 4,50 5,0 5,51 5,99 MX. STROKE 0,99 1,14 1,39 1,39 1,39 Style 0 only 1,8 μm nickel Spring initial height (): 25 grams Spring mid stroke (/2): 60 grams Coplanarity: 0,13 (Single Row up to 10 pins; Double Row up to 20 pins), For higher pin counts, contact Technical Support Current rating: 2 (continous), 3 (peak) per contact PGE 7 SPRING-LODED CONNECTORS
2 SPRING-LODED CONNECTORS SERIES 812 & 814 GRID SURFCE MOUNT, MID PROFILE SINGLE ND DOULE ROW STRIPS SINGLE ROW Series 812 Number of Pins X Modular contacts for use on grid, available in ten heights from 6,48 to 10,92, supplied in single and double row contact strips Extended body provides greater bearing surface for increased strength & plunger protection oth 812 & 814 series, contact styles 0 through 9, are available on 32mm or 44mm wide carrier tape and fitted with vacuum pick-up clips for automated pick and place assembly. Tape and Reel packaging per EI-481. See page 12 for strip lengths available and ordering information ORDERING INFORMTION Single Row Series XX-30-00X101 Specify number of contacts Double Row Series XX-30-00X101 1,5 DI. DOULE ROW Series 814 Specify number of contacts CONTCT STYLE For 812 and 814 Tape & Reel packaging, see page 12 INITIL HEIGHT 6,48 6,99 7,49 8,0 8,51 CONTCT STYLE INITIL HEIGHT 8,89 9,4 9, ,92 PGE 8 SPRING-LODED CONNECTORS 1,5 DI. Number of Pins X / 2 μm nickel Spring: eryllium copper-plated 10μm gold Spring initial height (): 25 grams Spring mid stroke (0,7): 60 grams Coplanarity: 0,13 (Single Row up to 10 pins; Double Row up to 20 pins), For higher pin counts, contact Technical Support Current rating: 2 (continous), 3 (peak) per contact
3 SPRING-LODED CONNECTORS SERIES 819 & 820 GRID SURFCE MOUNT, LONG STROKE SINGLE ND DOULE ROW STRIPS SINGLE ROW Series 819 Number of Pins X Modular contacts for use on grid, available in a height of 7,32, supplied in single and double row contact strips Pistons have a 1,14 mid. stroke and a 2,29 max. stroke oth 819 & 820 series contact strips are designed for placement onto a Ø 2,08 solder pad prior to reflow soldering Tape and Reel packaging available, contact Technical Support ORDERING INFORMTION Single Row Series 819 Max XX Specify number of contacts ,5 DI. 2,29 7,32 Double Row Series XX Specify number of contacts DOULE ROW Series 820 1,5 DI. Number of Pins X / 2 Max. 2,29 7,32 0,25μm nickel Spring initial height: 25 grams Spring mid stroke (1,14): 60 grams Current rating: 2 (continous), 3 (peak) per contact PGE 9 SPRING-LODED CONNECTORS
4 SPRING-LODED CONNECTORS SERIES 810 GRID HORIZONTL SURFCE MOUNT SINGLE ROW STRIPS SINGLE ROW Series 810 Number of Pins x Modular contacts for use on grid, supplied in single row contact strips. Piston action is parallel to the board surface Ideal for daisy chaining of P.C.. s when mated with right angle target connectors (series ) or for mating boards in a perpendicular orientation Pistons have a 1,14 mid. stroke & 2,29 max. stroke 810 series contact strips are designed for manual placement onto solder pads ORDERING INFORMTION Single Row Series XX TOP VIEW (TYP) 1,88 Specify number of contacts FRONT VIEW Number of Pins x PGE 10 SPRING-LODED CONNECTORS 1,27 2,24 (TYP) 2,03 7,54 DETIL (Max. ) Suggested P.C.. FOOTPRINT 2,29 2,13 1,07 Coplanarity 0,13. For Pin Counts >10 positions consult Technical Support μm nickel Spring initial height: 25 grams Spring mid stroke (1,14): 60 grams Current rating: 2 (continous), 3 (peak) per contact
5 SPRING-LODED CONNECTORS SERIES 812 & 814 GRID SURFCE MOUNT WITH LIGNMENT PINS SINGLE ND DOULE ROW STRIPS SINGLE ROW Series 812 Number of Pins X Modular contacts for use on grid, available in ten heights from 6,48 to 10,92, supplied in single and double row contact strips Pistons have a 0,7 mid stroke & max. stroke oth 812 & 814 series contact strips are designed for manual placement, Ø 0,56±0,08 plated through-holes in the circuit board are required for the alignment pins prior to intrusive reflow soldering ORDERING INFORMTION Single Row Series X XX-30-01X101 1,5 DI. 0,43 DI. 1,5 DI. 0,43 DI. DOULE ROW Series 814 Number of Pins X / 2 (TYP) (TYP) 1,75 1,75 Specify number of contacts Specify number of contacts CONTCT STYLE Double Row Series X XX-30-01X101 INITIL HEIGHT 6,48 6,99 7,49 8,0 8,51 μm nickel Spring initial height (): 25 grams Spring mid stroke (0,7): 60 grams CONTCT STYLE Current rating: 2 (continous), 3 (peak) per contact INITIL HEIGHT 8,89 9,4 9, ,92 PGE 11 SPRING-LODED CONNECTORS
6 SPRING-LODED CONNECTORS SERIES 811, 812, 813, 814 GRID SURFCE MOUNT CRRIER TPE ND PCKGING Ordering Information for Series 811/812/813/814 in Carrier Tape Single Row Series XX-30-00X191 Specify number of contacts Single Row Series XX-30-00X191 Specify contact style 1-4 Specify number of contacts Single Row Series XX-30-00X191 Specify number of contacts Double Row Series XX-30-00X191 Specify number of contacts Double Row Series XX-30-00X191 Specify contact style 1-4 Specify number of contacts Double Row Series XX-30-00X191 Specify number of contacts Single Row Series 812 Double Row Series XX-30-00X191 Specify number of contacts XX-30-00X191 Specify number of contacts Single Row Series 812 Double Row Series XX-30-00X XX-30-00X191 PGE 12 SPRING-LODED CONNECTORS Specify contact style 3-9 Specify number of contacts mm wide, 9mm deep or 44mm wide, 13mm deep 4,47 7,14 VCUUM PICK-UP CLIP REMOVED FTER SOLDERING 16mm Specify contact style 3-9 Specify number of contacts mm wide, 9mm deep or 44mm wide, 13mm deep 4,47 9,75 VCUUM PICK-UP CLIP REMOVED FTER SOLDERING 16mm
SPRING-LOADED CONNECTORS
SERIES 812 & 814 GRID SURFCE MOUNT, MID PROFILE SINGLE ROW Series 812 Modular contacts for use on grid, available in ten heights from.255 to.430, supplied in single and double row contact strips Extended
MAXIMUM SOLUTIONS (2/14 -- PR606) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY Fax:
MAXIMUM SOLUTIONS Mill-Max Series 854 Single Row and 855 Double Row Pitch Surface Mount and Through-Hole Spring-Loaded Connectors and Mating Target Connectors Mill-Max has developed high density, (1,27
APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
MAXIMUM SOLUTIONS. New Low Profile Target Connectors
MAXIMUM SOLUTIONS New Low Profile Target Connectors Mill-Max is excited to announce the release of our lowest profile target connectors with an above board height of only (2,21mm). Target connectors are
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight
AMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
SPRING-LOADED CONNECTORS PAD CONNECTORS
SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS Quick Selector Chart Spring-loaded connectors and Pad connectors TEL +1 32 21 0 00 2 mm 2.5 mm 3 35, 36 35, 36 Surface mount perpendicular with positioning
ELUM TM Series Right Angle Illuminated Latching Pushbutton
LED FREE COMPTIBLE OPTION ELUM TM Series Right ngle Illuminated Latching Features/Benefits SPDT (N.O. & N.C.) Low height above PCB Reliable self-cleaning contact Surface-mount or thru-hole PCB Standard
SSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
onlinecomponents.com
YF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock / Series New Low profile and space saving body of 1.0 mm high and mm deep (3.70 mm including the lever) and can have a minimum of four and two contacts
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
Dubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
MDS Series Micro Snap-acting Detect Switches
Micro Detect Switches Features/Benefits tactile feel Small package size vailable in vertical or right angle PCB mount RoHS compliant and compatible Typical pplications Detect the presence of a mechanical
IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
SFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
Spring Loaded Contacts
Spring Loaded Contacts Spring Probes ATE Test Probes Slim probes for automated testing Harwin supply a variety of Spring Probes, suitable for use on manual test jigs and automatic test equipment (ATE)
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
(Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications Fine Pitch SMT Stacking Connectors (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications
CF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
Right Angle 2.0mm Pitch Connector
AVX extends their board-to-board right angle connectors with a new 2mm pitch version, an addition to the existing versions 9155-300 with a 3mm pitch and 9155-500 with a 2.5mm pitch. This new connector
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) 2MM FB,ASY,048,SIG,HDR,EN,6.50
CFP2(CN121 series) Application Specification
CFP2(CN121 series) Application Specification Note All numerical values are in metric units. Dimensions are in millimeters. Unless otherwise specified, dimensions have a tolerance of ±0.30 mm and angles
CFP2(CN121 series) Application Specification
CFP2(CN121 series) Application Specification Note All numerical values are in metric units. Dimensions are in millimeters. Unless otherwise specified, dimensions have a tolerance of ±0.30 mm and angles
Test Development Validation Production. Micro-BGA Socketing Systems BGA Socket Adapter Systems Flip-Top BGA Sockets BGA Interposers
Test Development Validation Production Micro-BGA Socketing Systems BGA Socket Adapter Systems Flip-Top BGA Sockets BGA Interposers BGA Socket Adapter Systems Micro-BGA Socket Adapter System 0.50mm and
The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
3M Boardmount Socket 2 mm x 2 mm Straight Surface Mount, Straight and Right Angle Plated Through-Hole 1502 Series
M Boardmount Socket High Temperature Insulator Reflow Solder ompatible Low height helps minimize PB stack height End Stackable Thru-hole versions are side stackable SMT parts are available in tape and
Test Development Validation Production. Micro-BGA Socketing System BGA Socket Adapter System Flip-Top BGA Socket BGA Interposer
Test Development Validation Production Micro-BGA Socketing System BGA Socket Adapter System Flip-Top BGA Socket BGA Interposer BGA Socket Adapter Systems Micro-BGA Socket Adapter System 0.50mm and 0.65mm
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
2.54mm (.100") Pitch Connectors
mm (.100") Pitch Connectors HRWIN plc Fitzherbert Road, Farlington, Portsmouth, Hampshire, PO6 1RT, UK Tel: (Sales) +44 (0) 23 9237 0451 Tel: (dmin) +44 (0) 23 9231 4545 Fax: +44 (0) 23 9231 4590 Sales,
USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
RACON short-travel keyswitches
General data short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available
Vertical Top Entry Card Edge: BTB
AVX continues to develop unique connectors to fill the gap in the industrial market, specifically as it relates to low pin count requirements. The newest addition to AVX s broadening line of one piece
APPLICATION SPECIFICATION
IPASS 0.8mm PITCH I/O CONNECTOR 1.0 SCOPE...2 2.0 PRODUCT DESCRIPTION...2 2.1 PRODUCT NAME AND SERIES NUMBER...2 2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS...2 3.0 REFERENCE DOCUMENTS...2 3.1 MOLEX
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
Connectors. product catalog no. 26
Connectors product catalog no. 26 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Product Groups Overview Explanation of Symbols Termination Application
decoupled connectors RF Coax Connectors Product Facts
Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
Inverted Thru Board Card Edge: BTB
AVX has developed the 1-Piece bottom entry card edge connector to allow a perpendicular PCB to be mated to a top mounted main FR4 or metal core PCB from the bottom side. The most popular application on
PROCESSING RECOMMENDATIONS
PROCESSING RECOMMENDATIONS For Samtec s 0.80mm SEARAY Right Angle (SEAF8-RA) Connectors The method used to solder these high-density connectors is the same as that used for many BGA devices even though
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 0.80mm (.031") Pitch Small Form-Factor Pluggable (SFP) Receptacle 74441
NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES
NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller
SFP (Small Form-factor Pluggable) Products
SFP (Small Form-factor Pluggable) Products As a founding member and innovator for the Small Form-factor Pluggable (SFP) Multi-Source Agreement (MSA), TE supports the market with a full range of SFP products.
THRU BEZEL-COPPER THRU BEZEL-ELASTOMERIC BEHIND THE BEZEL
9054 Series QSFP+ Cage RoHS COMPLIANT THRU BEZEL-COPPER THRU BEZEL-ELASTOMERIC BEHIND THE BEZEL QSFP+ MSA compliant (SFF-8436) Robust design Unique spring loaded heat sink clip Choice of 2 lightpipe designs
USB Type-C Connector. Overview. Features. CX Series. 1. Easy mating due to the reversible form factor
USB Type-C Connector CX Series Overview Note: Please contact us for TID acquisition status of each product. The CX series connector conforms to the next-generation USB standard USB Type-C. It is expected
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z Interconnection Systems) Catalog Revised 8-04
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z s) Catalog 6594 Revised 8-04 High Speed Stacking Connectors (Parallel and Right-ngle Board-to-Board) Stacking Height
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted
Extract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership
Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING
PCB Hardware. Contents
PC Hardware Contents SMT Test Points SMT Cable Clips Coin Cell Holders SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with
#redcube. REDCUBE PRESS-FIT REDCUBE PLUG REDCUBE SMD REDCUBE THR
#redcube REDCUBE Terminals are the most reliable high-power contacts on PCB level. Low contact resistance guarantees minimum self-heating. Four different designs cover all leading processing technologies
FOR CELLULAR PHONE; ULTRA LOW PROFILE TYPE FOR PORTABLE EQUIPMENT (0.5mm PITCH)
FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm PITCH) XR(3/5) SYSTEM CONNECTORS ULTR-LOW PROFILE TYPE (XR3) I/O CONNECTORS FOR PORTBLE EQUIPMENT (XR5) for portable equipment Receptacle
1.25mm Pitch Miniature Crimping Connector
1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)
343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
HD Series. Signal Connector DIN Applicable Markets: Mil-Aero Space Marine
Signal Connector DIN 41612 HDC and HDD interchangeable with DIN41612 C and D 0.6 mm and 1.0 mm Hypertac contacts, in a two or three row format Up to 192 positions HDT style offers mixed arrangements with
Model XDL S Rev A
Delay Line DESCRIPTION The XDL15-3-030S can be used in amplifier linearization applications from 135 2700Mhz. Small form factor of XDL15-3-030S is ideal for cascading to obtain longer delay. The Xinger
Xmultiple Technology SFP Products Information
Xmultiple Technology SFP Products Information SFP Products Fiber Channel InfiniBand Ethernet SFP Product Types Optic Modules SFP System Copper HSSDC2 Module HSSDC2 Cable Assemblies PT Connectors SFP History
onlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
PROCESSING RECOMMENDATIONS. For Samtec s SEAM8/SEAF8 Vertical Connectors
The method used to solder these high density connectors is the same as that used for many BGA devices even though there are some distinct structural differences. BGA s have spherical solder balls attached
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
ODU MINI-CARD Board-to-Board Connector Grid 1.27 x 2.54 mm SMT and Solder-In Technology
Catalogue Nr. 1009 OU MINI-CR oard-to-oard Connector Grid 1.2 x 2.54 mm SMT and Solder-In Technology OU-Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, -84453 Mühldorf/Inn, Telefon: +49/86 31/61
XH5 SMT-compatible Connectors with a 1.27-mm Pitch
New Product Half-pitch SMT Connectors (oard to oard and oard to Cable Connectors) XH5 SMT-compatible Connectors with a -mm Pitch These SMT Connectors can be mounted on the back surfaces of circuit boards.
M20 and M22. (2.54mm and 2.00mm pitch)
M20 and M22 (2.54mm and 2.00mm pitch) M20 and M22 Connectors Great Design Flexibility Today s electronics and PCB designers are faced with many connector challenges, including applications with increased
CRIMPFLEX connectors for flexible circuits
CRIMPFLEX connectors for flexible circuits CRIMPFLEX CONNECTORS Technical data...3 CRIMPFLEX CRIMPING Description...4 MALE SOLDER TABS Solder tabs environment...5 Standard short male solder tab...6 Standard
APPLICATION SPECIFICATION
1 of 21 F 1.0 OBJECTIVE The objective of this specification is to provide information to assist with the application and use of MEG- Array High Speed Mezzanine BGA (Ball Grid Array) connectors system.
FCI-TTI Fine Pitch Mezzanine Presentation. Conan 1.0mm BergStak 0.8mm MezzoStak 0.5mm
FCI-TTI Fine Pitch Mezzanine Presentation Conan 1.0mm BergStak 0.8mm MezzoStak 0.5mm 1 FCI-TTI Fine Pitch Mezzanine Conan 1.0mm 2 Contents Fine Pitch Mezzanine Presentation Conan 1.0mm Pages 2-15 BergStak
2 PIECE BOARD-TO-BOARD
2 PIECE BOARD-TO-BOARD 201-01-123 1. SPECIFICATION DISTRIBUTION No restrictions for issue 2. SCOPE This specification contains the application notes for the 9159 two part connectors. 3. PRODUCTS 10-9159
CS Series. Automation Controls Catalog
utomation Controls Catalog For board-to-micro coaxial wire Micro coaxial connectors (Space saving) CS Series 2. with strong resistance to various environments provides high contact reliability and facilitates
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
BGA Socketing Systems
DATA BOOK BGA-TECH04 (REV. 3/04) BGA Socketing Systems Search for a footprint or build a part number online at www.bgasockets.com Solutions for Virtually Any BGA Application BGA Socket Adapter System Designed
TEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO
The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to medium in size ranging from 6 to 64 terminals. There are 4
Application Specification IMPACT* Standard Connector Systems 05 NOV 10 Rev A
Application Specification IMPACT* Standard 114-13258 Connector Systems 05 NOV 10 Rev A NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
Through-Hole and Surface Mount Equipment
Through-Hole and Surface Mount Equipment 97 Model 9700 XY Surf-Shooter SMT Zierick s family of full and semi-automated throughhole terminal insertion systems simplifies applications, and provides the greatest
GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3
![GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3](/thumbs/81/84156060.jpg "GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3")
` Model 1P603S Hybrid Coupler 3 db, 90 Features: 2.3 2.7 GHz. W-LAN and MMDS Low Loss High Isolation 90 o Quadrature Surface Mountable Tape And Reel Available in Lead-Free (as illustrated) or Tin- Lead
Spring Contacts. Antenna Contacts with Positive Stop EMC SHIELDING. 1.5mm HIGH, 2mm WIDE.
Antenna Contacts with Positive Stop Extended beam miniature spring contacts, ultra-low profile. Ideal for antenna feed in mobile devices, LED lamp connections or RFID tags. Ultra-low connection system
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
INTERCONNECT SOLUTIONS
INTERCONNECT SOLUTIONS Products Overview Connect with Us... Experience Makes the Difference Who We Are We have been designing and manufacturing interconnect products for over 40 years. Today we supply
ELECTRICAL SPECIFICATIONS**
REV A Hybrid Couplers 3 db, 90 Description The 1P503AS Pico Xinger is a low profile, high performance 3dB hybrid coupler in an easy to use manufacturing friendly surface mount package. It is designed for
SFP (Small Form-factor Pluggable) Products
SFP (Small Form-factor Pluggable) Products As a founding member and innovator for the Small Form-factor Pluggable (SFP) Multi-Source Agreement (MSA), Tyco Electronics supports the market with a full range
USB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
General Specifications
Series GT Process Sealed Ultra-Miniature SMT Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical
PCB Hardware. Contents. SMT Test Points SMT Cable Clips SMT Jumper Links PCB Jumper Links PCB Terminals, Turret Lugs Spacers / Pillars / Standoffs
PC Hardware Contents SMT Test Points SMT Cable Clips SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with standard probes,
TE CONNECTIVITY (TE) 096 EURO TYPE R PIN ST ASSY. EUROCARD Eurocard Type R. TE Internal Number: Alias ID: ,
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved EUROCARD TE CONNECTIVITY (TE) 096 EURO TYPE R PIN ST ASSY 650470-5 TE Internal Number: 650470-5
Mezzanine connectors
Mezzanine connectors MezzSelect : a new brand in the industry 2 MezzSelect : A wide range of mezzanine connectors; An easy to use product selector: Web based; Printed. Why the MezzSelect portfolio? 3 The
SYSTEM CONNECTORS ULTRA-LOW PROFILE TYPE (AXR3) I/O CONNECTORS FOR PORTABLE EQUIPMENT (AXR5)
System connector ultra low profile 18, 22 and 24 contacts I/O connectors for portable equipment 18, 22, 24 and 26 contacts 50 contacts FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm
3M Serial Advanced Technology Attachment (SATA) Connector Signal Plug, Boardmount, Surface Mount Right Angle and PTH Vertical
7-position supports motherboard signal requirements EMLB contacts for hot swap Blind mate polarization for easy cable attach Through-hole and surface mount options PCB retention clip aids manufacturing
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type