3M Serial Advanced Technology Attachment (SATA) Connector Signal Plug, Boardmount, Surface Mount Right Angle and PTH Vertical

Transcription

1 7-position supports motherboard signal requirements EMLB contacts for hot swap Blind mate polarization for easy cable attach Through-hole and surface mount options PCB retention clip aids manufacturing Meets SATA Specification See regulatory information appendix (RIA) for chemical compliance information Date Modified: May 25, 2011 Sheet 1 of 5 Physical Insulator: Material: High temperature thermoplastic Flammability: UL 94V-0 Color: Black Contact: Material: Copper Alloy Plating: Wiping Area: Gold Flash Solder Tails: 100 µ [ 2.54 μm ] Tin Underplating: 50 µ [ 1.27 μm ] Nickel Marking: M Logo Electrical Environmental Current Rating: 1.5 A Insulation Resistance: 10 ΜΩ (minimum) Withstanding Voltage: 500 VAC at sea level Temperature Rating: -40 C to +85 C

2 Right Angle Surface Mount [.45] 5.41 [.21] 7X 0.84 [.0] [.050] PIN S [.020].15 [.124] 2.25 [.089] [.410] 4.00 [.157] PCB CONTACT [.050] 7X 0.40 [.016] 2.84 [.112] 2.56 [.101] [.502] PIN S [.074] [.688] 2.00 [.079] 1.9 [.527] 5.78 [.228] 1.90 [.075].15 [.124] 2x 2.70 [.106] mm (Inch) Tolerance Unless Noted mm ± ±.25 ±.127 [ ] Dimensions for Reference only Sheet 2 of 5

3 Right Angle Surface Mount COMPONENT KEEP OUT AREA 2X 2.20 [0.087] 2X.00 [0.118] 1.00 [0.09] [0.502] 7X 0.90 [0.05] 2X 1.50 PLATED [Ø0.059] THROUGH HOLE 2X 2.6 [0.09] PIN S [0.079] TYP 7.62 [0.00] PIN S [0.101] RECOMMENDED P.C.B. LAYOUT TOLERANCE ±0.05 [0.002] Ordering Information SH Sheet of 5

4 Vertical Through-Hole [0.661] 7.61 [0.00] 1.70 [0.067] 8.40 [0.1] 4.25 [0.167] 4.75 [0.187] 7X 2.44 [0.096] 7X 0.40 [0.016] [0.511] PIN [0.158] 1.00 [0.09] PCB RETENTION CLIP NOT SHOWN FOR CLARITY 1.70 [0.067] 4.00 [0.158] 2.20 [0.087] 0.90 [0.05] 1.15 [0.045] 1.65 [0.065] [0.410] 0.82 [0.02] 2.11 [0.08] 5.70 [0.225] mm (Inch) Tolerance Unless Noted mm ± ±.25 ±.127 [ ] Dimensions for Reference only Sheet 4 of 5

5 Vertical Through-Hole [0.511] PIN 1 2X Ø1.5 PLATED [Ø0.05] THROUGH HOLE CONNECTOR OUTLINE TYP 0.50 [0.020].81 [0.150] 7X Ø0.74 [Ø0.029] RECOMMENDED P.C.B. HOLE LAYOUT TOLERANCE ±0.05 [0.002] Ordering Information SH Sheet 5 of 5

6 Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. M Electronics Solutions Division 6801 River Place Blvd. Austin, TX U.S.A Please recycle. Printed in USA. M All rights reserved. RIA-2217B-E