Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH

Size: px

Start display at page:

Download "Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH"

Janis Bonnie Gardner
6 years ago
Views:

1 rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector. These Industry Standard connectors are backed by Harwin s outstanding service, quality and distribution network, and are an ideal choice for a miniature alternative to larger pin header and socket connections. M50 Single and Double row pin headers and sockets, in vertical and horizontal orientations, for board-to-board connections. mm (0.05 ) pitch in both directions, with 0.4mm square male pins. Jumper Sockets and Pin Header Variants also available. M50 ID able connectors for 0.635mm pitch ribbon cable, and associated board connectors with securing latches and polarisation, for cable-to-board connection. omplete cable assemblies also supplied as standard. M50 Polarised Double row connectors for board-to-board, with added shrouding and a polarisation feature. M52 Single and Double row pin headers and sockets, in vertical and horizontal orientations, for board-to-board connections. mm (0.05 ) pitch along the connector, 2.54mm (0.1 ) between connector rows using 0.46mm square male pins. Pin Header Variants also available. rcher Kontrol mm pitch durable, rugged board-to-board connectors. vailable in a choice of orientations and mating heights, these connectors add a tougher option to the rcher family. Due to the fully shrouded design, these connectors are suited for blind-mating applications. They can withstand lateral and twisting forces, and tolerate a significant amount of mis-alignment. urrent rating of 1.2 per contact. Enhanced durability of 500 mating cycles minimum. Vertical and Horizontal options in both male and female connectors board-to-board connection for parallel/mezzanine, motherboard to daughterboard, or coplanar/edge-to-edge P layouts. dditional strain relief with retaining SMT tabs. Supplied in tape and reel, with pick-and-place caps where required, for automated assembly. Increased operating temperature range: -55 to Variable stacking height options with multiple connector sizes in both genders. rcher Kontrol offers the ideal connection system for demanding industrial environments: Drives and controls Vehicle control systems Dataloggers Trackside monitoring equipment IOT installations Large scale factory installations 173

rcher Kontrol Specification Materials Mouldings: ontacts: Retaining strap: Finish: ontacts: Retaining strap: Electrical urrent: Voltage proof: ontact resistance: Insulation resistance: High

2 rcher Kontrol Specification Materials Mouldings: ontacts: Retaining strap: Finish: ontacts: Retaining strap: Electrical urrent: Voltage proof: ontact resistance: Insulation resistance: High Temperature Plastic UL94V-0 Phosphor ronze rass See individual pages Gold on contact area, Tin on tails Tin 1.2 max per contact 500V for 1 minute 25mΩ max 10GΩ min Mechanical Durability: Insertion force (max): Withdrawal force (min): Environmental Operating temperature: Vibration sensitivity: Solderability: Soldering heat resistance: 500 operations 0.8N per contact 0.2N per contact -55 to Hz to 2000Hz, 1.52mm, 196m/s² (20G), duration 12h 245 for 5 seconds 260 for 10 seconds mm (.050") PITH 174

3 rcher Kontrol Mating Profiles mm (.050") PITH 6.75mm HEIGHT FEMLE VERTIL SMT HORIZONTL SMT 6.25mm HEIGHT 9.05mm HEIGHT 13.65mm HEIGHT VERTIL SMT MLE 8.25mm HEIGHT mm HEIGHT HORIZONTL SMT ll dimensions in mm. 175

4 rcher Kontrol onnectors Female Vertical Surface Mount Suitable for parallel board-to-board (mezzanine stacking) or motherboard-to-daughterboard configurations. hoice of three height options. Polarised and shrouded housing design. Location pegs and tape & reel packaging for automated assembly processes. VERTIL 6.30 LULTION x (Total No. of contacts - 2) D mm (.050") PITH 7.20 D H 2 x Ø Recommended P oard Pattern 0.45 ONNETOR HEIGHT 0 H = 6.25mm 1 H = 9.05mm 2 H = 13.65mm M55-60 X XX 42 R PKGING R Tape & Reeled 42 Gold + Tin TOTL NO. OF ONTTS 12, 16, 20, 26, 32, 40, 50, 68, 80 ll dimensions in mm. 176

configurations. Hold-down SMT retaining straps for additional retention to the board.

HORIZONTL 5.20 7.20 LULTION + 6.35 0.635 x (Total No. of contacts - 2) + 4.42 D + 3.02 D 10.80 7.20 H 1.50 3.

5 rcher Kontrol onnectors mm (.050") PITH Female Horizontal Surface Mount Suitable for coplaner (edge-to-edge) or motherboard-to-daughterboard configurations. Hold-down SMT retaining straps for additional retention to the board. Polarised and shrouded housing design. Location pegs and tape & reel packaging for automated assembly processes. HORIZONTL LULTION x (Total No. of contacts - 2) D D H square 2 x Ø Recommended P oard Pattern 0.50 M XX 42 R PKGING R Tape & Reeled 42 Gold + Tin TOTL NO. OF ONTTS 12, 16, 20, 26, 32, 40, 50, 68, 80 ll dimensions in mm. 177

rcher Kontrol onnectors Male Vertical Surface Mount Suitable for parallel board-to-board (mezzanine stacking) or motherboard-to-daughterboard configurations.

635 x (Total No. of contacts - 2) + 4.42 D + 4.02 mm (.050") PITH 5.80 7.20 4.20 D 4.00 5.50 2.20 H 2 x Ø1.65 7.60 5.00 1.10 0.80 1.20 1.50 0.75 + 0.

6 rcher Kontrol onnectors Male Vertical Surface Mount Suitable for parallel board-to-board (mezzanine stacking) or motherboard-to-daughterboard configurations. hoice of three height options. Polarised and shrouded housing design. Location pegs and tape & reel packaging for automated assembly processes. VERTIL LULTION x (Total No. of contacts - 2) D mm (.050") PITH D H 2 x Ø Recommended P oard Pattern 0.50 ONNETOR HEIGHT 0 H = 6.75mm 1 H = 8.25mm 2 H = 9.85mm M55-70 X XX 42 R PKGING R Tape & Reeled 42 Gold + Tin TOTL NO. OF ONTTS 12, 16, 20, 26, 32, 40, 50, 68, 80 ll dimensions in mm. 178

rcher Kontrol onnectors Male Horizontal Surface Mount mm (.050") PITH Suitable for coplaner (edge-to-edge) or motherboard-to-daughterboard configurations.

7 rcher Kontrol onnectors Male Horizontal Surface Mount mm (.050") PITH Suitable for coplaner (edge-to-edge) or motherboard-to-daughterboard configurations. Hold-down SMT retaining straps for additional retention to the board. Polarised and shrouded housing design. Location pegs and tape & reel packaging for automated assembly processes. HORIZONTL LULTION x (Total No. of contacts - 2) D D square 2 x Ø Recommended P oard Pattern 0.50 M XX 42 R PKGING R Tape & Reeled 42 Gold + Tin TOTL NO. OF ONTTS 12, 16, 20, 26, 32, 40, 50, 68, 80 ll dimensions in mm. 179

8 rcher onnectors - M50 Specification mm pitch male pin headers (with 0.4mm square pins) and female sockets, for board-to-board connection. Materials Mouldings: ontacts: Finish: Electrical urrent: Voltage proof: ontact resistance: Insulation resistance: High Temperature Plastic UL94V-0 opper lloy See individual pages 1 per contact 300V, 500V D for 1 minute (see individual drawings) 30mΩ max 500MΩ min Mechanical Durability M50-310, 312, 491: M50-311: M50-315: M50-353, 363, 393: Others: 100 operations 600 operations 25 operations 500 operations 300 operations Insertion force (max) M50-303, 313, 314: 1.17N per contact Jumper sockets: 10.0N Others: 2.0N per contact Withdrawal force (min) Jumper sockets: 1.3N Others: 0.1N per contact Vibration sensitivity: Shock severity: 10-55Hz, 1.5mm, 6 hours duration 294m/s 2 (30G) for 11ms mm (.050") PITH Environmental Operating temperature: Solderability: Soldering heat resistance: -40 to for 5 seconds 260 for 5 seconds 180

9 rcher onnectors - M50 Mating Profiles mm (.050") PITH SINGLE ROW VERTIL P TIL VERTIL P TIL FEMLE VERTIL SMT VERTIL SMT Low Profile MLE HORIZONTL P TIL VERTIL SMT DOULE ROW VERTIL P TIL HORIZONTL P TIL FEMLE VERTIL SMT VERTIL SMT Low Profile VERTIL P TIL MLE HORIZONTL P TIL VERTIL SMT ll dimensions in mm. 181

10 rcher onnectors M50 Female P Tail Vertical Twin beam connector for higher durability. SINGLE ROW LULTION x (No. of contacts per row - 1) mm (.050") PITH Ø Recommended P oard Pattern DOULE ROW LULTION x (No. of contacts per row - 1) 3.10 Ø Recommended P oard Pattern 0 Double Row 3 Single Row M X XX XX 42 Gold + Tin (Single Row) 45 Gold (Double Row) NO. OF ONTTS PER ROW 02 to 06, 08, 10, 20 Single Row 03 to 50 Double Row ll dimensions in mm. 182

11 rcher onnectors M50 mm (.050") PITH Female P Tail Horizontal Horizontal connector has two point solder fixing for connector rigidity. Twin beam connector for higher durability. HORIZONTL LULTION x (No. of contacts per row - 1) Ø Recommended P oard Pattern M XX Gold NO. OF ONTTS PER ROW 02 to 50 ll dimensions in mm. 183

rcher onnectors M50 Female Vertical Surface Mount Locating pegs (posts) available to ensure correct positioning on the board. lternative height connectors available on the following page.

10 2.15 5.80 4.60 0.15 0.65 0.42 4.80 Recommended P oard Pattern WITH POST, DUL ENTRY 1.35 LULTION + 4.37 x (No. of contacts per row - 1) + 3.16 0.50 3.10 Ø1.50 1.70 Ø1.20 Ø0.80 0.90 4.60 4.60 Ø0.

12 rcher onnectors M50 Female Vertical Surface Mount Locating pegs (posts) available to ensure correct positioning on the board. lternative height connectors available on the following page. ontact for Tape and Reel options. Dual entry connector can be used as either top or bottom entry. WITHOUT POST LULTION x (No. of contacts per row - 1) mm (.050") PITH Recommended P oard Pattern WITH POST, DUL ENTRY 1.35 LULTION x (No. of contacts per row - 1) Ø Ø1.20 Ø Ø0.70 Ø Recommended P oard Pattern Without Posts 1 With Posts M50-31 X XX XX 42 Gold + Tin (With Posts) 45 Gold (Without Posts) NO. OF ONTTS PER ROW 03 to 50 Without Posts 05 to 12, 15, 20, 25, 30, 35, 40, 45, 50 With Posts ll dimensions in mm. 184

ontact technical@harwin.com for Tape and Reel options. SINGLE ROW LULTION + 1.67 x (No. of contacts per row - 1) 1.80 4.40 1.70 3.60 0.15 0.74 DOULE ROW 0.42 3.

13 rcher onnectors M50 mm (.050") PITH Female Vertical Surface Mount, Low Profile Lower profile surface mount connector with twin beam contacts for additional board-to-board height options. ontact for Tape and Reel options. SINGLE ROW LULTION x (No. of contacts per row - 1) DOULE ROW Recommended P oard Pattern LULTION x (No. of contacts per row - 1) Recommended P oard Pattern 2 Double Row 4 Single Row M50-31 X XX XX X PKGING R Tape & Reeled (Single Row) lank Loose 45 Gold NO. OF ONTTS PER ROW 03 to 50 Double Row 02 to 06, 08, 10, 20 Single Row ll dimensions in mm. 185

of contacts per row - 1) 0.74 1.80 4.20 1.60 0.15 2.10 0.40 3.10 Ø0.70 Recommended P oard Pattern DOULE ROW WITH POSTS LULTION + 1.67 x (No. of contacts per row - 1) + 0.40 3.40 2.20 5.50 Ø0.71 Ø0.

14 rcher onnectors M50 Female Vertical Surface Mount, Low Profile Locating pegs (posts) available on double row to ensure correct positioning on the board. Dual entry connectors can be used as either top or bottom entry. ontact for Tape and Reel options on double row. SINGLE ROW LULTION mm (.050") PITH x (No. of contacts per row - 1) Ø0.70 Recommended P oard Pattern DOULE ROW WITH POSTS LULTION x (No. of contacts per row - 1) Ø0.71 Ø Ø Recommended P oard Pattern M50-31 X XX XX X PKGING R Tape & Reeled (Single Row) 3 Single Row (without posts) 5 Double Row with posts lank Loose 42 Gold + Tin (Double Row) 45 Gold (Single Row) NO. OF ONTTS PER ROW 02 to 06, 08, 10, 20 Single Row 03 to 40 Double Row ll dimensions in mm. 186

switches. Suitable for use with male M50 pin headers. hoice of colours available.

15 rcher onnectors M50 mm (.050") PITH Jumper Sockets an be fitted and removed by hand, giving an alternative on-board programming method to DIP switches. Suitable for use with male M50 pin headers. hoice of colours available. losed top with handle available for easier handling, placing and removing. LOSED TOP LOSED TOP WITH HNDLE M50 XXX losed Top losed Top with Handle 190 lack 200 lack 192 Red 202 Red 193 lue 203 lue 05 Gold ll dimensions in mm. 187

40 square DOULE ROW LULTION x No. of contacts per row x (No. of contacts per row - 1) 3.00 2.30 1.00 Ø0.65 3.40 0.

16 rcher onnectors M50 Male P Tail Vertical Suitable for use with female connectors and jumper sockets. lso available with variable dimensions. SINGLE ROW mm (.050") PITH 3.00 Ø Recommended P oard Pattern square DOULE ROW LULTION x No. of contacts per row x (No. of contacts per row - 1) Ø square Recommended P oard Pattern 0 Double Row 3 Single Row M50-35 X XX Gold + Tin NO. OF ONTTS PER ROW 02 to 50 Double Row 02 to 06, 08, 10, 20 Single Row ll dimensions in mm. 188

rcher onnectors M50 mm (.050") PITH Male P Tail Horizontal Suitable for use with female connectors and jumper sockets. lso available with variable dimensions. SINGLE ROW 2.10 4.00 1.50 Ø0.

17 rcher onnectors M50 mm (.050") PITH Male P Tail Horizontal Suitable for use with female connectors and jumper sockets. lso available with variable dimensions. SINGLE ROW Ø0.60 Recommended P oard Pattern square 1.00 DOULE ROW 3.40 LULTION x No. of contacts per row x (No. of contacts per row - 1) Ø0.65 Recommended P oard Pattern square 0 Double Row 3 Single Row M50-39 X XX Gold + Tin NO. OF ONTTS PER ROW 02 to 50 Double Row 02 to 06, 08, 10, 20 Single Row ll dimensions in mm. 189

18 rcher onnectors M50 Male Vertical Surface Mount Single Row Suitable for use with female connectors and jumper sockets. Tape and Reel packaging option includes Pick and Place cap for automated assembly. SINGLE ROW LULTION x No. of contacts per row x (No. of contacts per row - 1) mm (.050") PITH Recommended P oard Pattern square 5.00 M XX 42 X PKGING lank Loose R Tape & Reeled NO. OF ONTTS PER ROW 02 to 06, 08, 10, Gold + Tin ll dimensions in mm. 190

rcher onnectors M50 mm (.050") PITH Male Vertical Surface Mount Double Row Suitable for use with female connectors and jumper sockets. lso available with variable dimensions.

40 square Recommended P oard Pattern LULTION WITH POSTS x No. of contacts per row x (No. of contacts per row - 1) 3.40-3.00 1.00 1.50 6.50 1.50 Ø0.80 1.68 5.50 0.40 square Ø0.75 0.

19 rcher onnectors M50 mm (.050") PITH Male Vertical Surface Mount Double Row Suitable for use with female connectors and jumper sockets. lso available with variable dimensions. vailable with or without location posts. Tape and Reel packaging option includes Pick and Place cap for automated assembly. WITHOUT POSTS square Recommended P oard Pattern LULTION WITH POSTS x No. of contacts per row x (No. of contacts per row - 1) Ø square Ø Recommended P oard Pattern M50-36 X XX 42 X 0 Without Posts 1 With Posts NO. OF ONTTS PER ROW 02 to 50 Without Posts 05 to 08, 10, 12, 15, 20, 25 With Posts PKGING lank Loose R Tape & Reeled (check website for available sizes) 42 Gold + Tin ll dimensions in mm. 191

20 rcher onnectors M50 Pin Header Variants If you are unable to specify the connector you require from our standard range of rcher M50 connectors, use the order code below to create an application-specific connector. ontact for further information, or search online for M50-XXX. Suitable for use with female connectors and jumper sockets. TERMINTION STYLES mm (.050") PITH Vertical P Tail W Series Extended P Tail F Series Vertical SMT S Series Pin section is 0.40mm square. P mounting hole is Ø0.65mm Pin section is 0.40mm square. P mounting hole is Ø0.65mm Pin section is 0.40mm square. For P pad layout see standard Male SMT pin header. dimension is Extended SMT T Series Pin section is 0.40mm square. For P pad layout see standard Male SMT pin header not to exceed 24.3mm Horizontal P Tail J Series Pin section is 0.40mm square. P mounting hole is Ø0.65mm M50 - XXX XXX X XX Gold DIMENSION Example: 7.8mm = 078 DIMENSION Example: 5.0mm = 050 NO. OF ONTTS PER ROW 01 to 50 W Vertical P Tail F Extended P Tail S Vertical SMT T Extended SMT J Horizontal P Tail ll dimensions in mm. 192

21 rcher onnectors Polarised Specification mm pitch male and female connectors, for board-to-board connection with polarisation. mm (.050") PITH Materials Mouldings: ontacts: Finish: Electrical urrent: Voltage proof: ontact resistance: Insulation resistance: High Temperature Plastic UL94V-0 opper lloy Gold 1 per contact 300V, 500V D for 1 minute 30mΩ max 500MΩ min Mechanical Durability: Insertion force (max): Withdrawal force (min): Environmental Operating temperature: Solderability: Soldering heat resistance: 100 operations 2.0N per contact 0.15N per contact -40 to for 5 seconds 260 for 10 seconds Mating Profiles MLE VERTIL P TIL HORIZONTL P TIL VERTIL SMT FEMLE VERTIL SMT ll dimensions in mm. 193

rcher onnectors Polarised Vertical Surface Mount Mating connectors in Surface Mount format. Female connector is also suitable for use with male P Tail connectors on the following page.

of contacts per row - 1) mm (.050") PITH + 3.15 3.10 1.90 D + 5.02 1.58 5.80 4.60 0.15 Ø1.00 Ø1.40 Ø0.80 0.42 Ø1.20 4.80 0.65 Recommended P oard Pattern MLE LULTION + 4.47 0.40 5.65 6.10 6.10 7.

22 rcher onnectors Polarised Vertical Surface Mount Mating connectors in Surface Mount format. Female connector is also suitable for use with male P Tail connectors on the following page. Polarisation to prevent mis-mating. Locating pegs of different sizes ensure correct orientation and positioning on the board. Shrouded for additional pin protection. FEMLE D LULTION x (No. of contacts per row - 1) mm (.050") PITH D Ø1.00 Ø1.40 Ø Ø Recommended P oard Pattern MLE LULTION (No pegs) 7.30 (With pegs) x (No. of contacts per row - 1) Ø1.20 Ø M50-4XX XX 45 X Ø1.35 Ø0.95 (Holes for With pegs connector) Recommended P oard Pattern PKGING lank Loose Tape & Reeled 430 Female R (check website for available sizes) NO. OF ONTTS PER ROW 490 Male without pegs 03 to 50 Female 491 Male with pegs 05 to 50 Male without pegs 45 Gold 05 to 08, 10, 12, 15, 20, 25 Male with pegs ll dimensions in mm. 194

rcher onnectors Polarised mm (.050") PITH Male P Tail P Tail male connectors suitable for use with female connector M50-430 Series, shown on previous page. Polarisation to prevent mis-mating.

23 rcher onnectors Polarised mm (.050") PITH Male P Tail P Tail male connectors suitable for use with female connector M Series, shown on previous page. Polarisation to prevent mis-mating. Shrouded for additional pin protection. VERTIL HORIZONTL square LULTION x (No. of contacts per row - 1) Ø0.65 Recommended P oard Pattern M50-4 X 0 XX 45 7 Vertical 8 Horizontal 45 Gold NO. OF ONTTS PER ROW 05 to 40 ll dimensions in mm. 195

24 rcher onnectors M50 ID Specification mm pitch cable-to-board connectors, with latching and polarisation. Materials Mouldings P Tail, SMT: ID able onnectors: ontacts: Finish M50-380: Others: Electrical urrent M50-330, 91X: M50-355, 365: M50-380, 90X: Voltage proof M50-90X/91X: Others: ontact resistance: Insulation resistance M50-90X, 91X: Others: LP, UL94V-0 PT, UL94V-0 opper lloy Gold on contact area Gold on contact area, Tin on tails 1 per contact 1.75 per contact 0.5 per contact 300V D for 1 minute 1,000V for 1 minute 30mΩ max 5MΩ min 1,000MΩ min Mechanical Durability: Insertion force (max): Withdrawal force (min): Environmental Operating temperature P Tail, SMT: ID able onnectors: able ssembly: Solderability: Soldering heat resistance: 100 operations 1.0N per contact 0.15N per contact -55 to to to for 5 seconds 260 for 10 seconds mm (.050") PITH Mating Profiles MLE VERTIL P TIL VERTIL SMT LE Female Female FEMLE LE 8.75 max max 9.00 max max max ll dimensions in mm. 196

on the following page. ID connection for fast termination of multiple contacts.

Standard cable assembly lengths from stock. Instruction sheet for Hand Tool is available at /instructions.

onstructed with ontact 1 attached to ontact 1, ontact 2 to ontact 2, etc. 5.10 1.90 4.05 3.20 0.635 1.

25 rcher onnectors M50 ID mm (.050") PITH Female able onnector & able ssembly Suitable for use with male vertical latching connectors shown on the following page. ID connection for fast termination of multiple contacts. Polarised to prevent mis-mating. Secure cable retention with positive latching to header. Standard cable assembly lengths from stock. Instruction sheet for Hand Tool is available at /instructions. FEMLE ID FEMLE-TO-FEMLE LE Uses 0.635mm pitch 30 WG Ribbon cable to UL2678. onstructed with ontact 1 attached to ontact 1, ontact 2 to ontact 2, etc able Length 3.05 HND TOOL ORDER ODE Z LULTION x (No. of contacts per row - 1) 330 Female ID onnector mm able ssembly mm able ssembly M50 - XXX XX Gold + Tin NO. OF ONTTS PER ROW 05, 10, 13, 17, 20, 25 ll 06, 07, 08 M only ll dimensions in mm. 197

26 rcher onnectors M50 ID Male Vertical Latching onnectors Suitable for use with female cable connectors shown on previous page. Surface mount option has locking pegs for location and retention. Shrouded for robust pin protection. Polarised to prevent mis-mating. Secure, positive latch & ejection system. Tape and Reel packaging option includes Pick and Place cap for automated assembly. P TIL mm (.050") PITH Ø0.70 Recommended P oard Pattern 0.40 square 2.72 LULTION SURFE MOUNT x (No. of contacts per row - 1) square Ø Recommended P oard Pattern M50-3 X 5 XX 42 X PKGING 5 P Tail 6 Surface Mount NO. OF ONTTS PER ROW 05, 06, 07, 08, 10, 13, 17, 20, 25 R lank Tape & Reeled (M50-365) Loose (M50-355) 42 Gold + Tin ll dimensions in mm. 198

P, permits cost effective cable to P attachment. ID connection for fast termination of multiple contacts.

Instruction sheet for Hand Tool is available at /instructions. MLE ID MLE-TO-FEMLE LE 0.635 3.00 1.90 3.20 Uses 0.

5.10 0.40 square 3.10 able Length HND TOOL 3.10 5.10 ORDER ODE LULTION + 5.

27 rcher onnectors M50 ID mm (.050") PITH Male able onnectors & able ssembly Male transitional cable connector suitable for soldering directly to P, permits cost effective cable to P attachment. ID connection for fast termination of multiple contacts. Suitable for mating with other sockets from the rcher range. Low profile, small footprint. Instruction sheet for Hand Tool is available at /instructions. MLE ID MLE-TO-FEMLE LE Uses 0.635mm pitch 30 WG Ribbon cable to UL2678. onstructed with ontact 1 attached to ontact 1, ontact 2 to ontact 2, etc square 3.10 able Length HND TOOL ORDER ODE LULTION Recommended P oard Pattern Z x (No. of contacts per row - 1) Ø Male ID onnector mm able ssembly mm able ssembly M50 - XXX XX Gold + Tin NO. OF ONTTS PER ROW 05, 10, 13, 17, 20, 25 ll 06, 07, 08 M only ll dimensions in mm. 199

28 rcher onnectors M52 Specification mm x 2.54mm pitch male pin headers (with 0.46mm square pins) and female sockets, for vertical board-to-board connection. Materials Mouldings: ontacts: Finish: Electrical urrent: Voltage proof: ontact resistance: Insulation resistance High Temperature Plastic UL94V-0 opper lloy Gold 1 per contact 500V, 1,000V D for 1 minute 30mΩ max 1,000MΩ min Mechanical Durability: Insertion force (max) M52-500, 510: Others: Withdrawal force (min) M52-500, 510: Others: Vibration sensitivity: Shock severity: 300 operations 1.0N per contact 1.5N per contact 0.12N per contact 0.1N per contact 50-2,000Hz, 3.13G, 45 minutes duration 294m/s 2 (30G) for 11ms mm (.050") PITH Environmental Mating Profiles Operating temperature: Solderability: Soldering heat resistance: -40 to for 5 seconds 260 for 5 seconds VERTIL P TIL (4.6mm Height) FEMLE VERTIL P TIL (8.5mm Height) VERTIL SMT VERTIL P TIL MLE VERTIL SMT ll dimensions in mm. 200

67 (when = 4.6mm) + (when = 8.5mm) x (No. of contacts per row - 1) Ø0.70 2.54 Recommended P oard Pattern NO.

29 rcher onnectors M52 mm (.050") PITH Female Vertical P Tail hoice of connector height. Suitable for use with male connectors with 0.46mm square pins. SINGLE ROW DOULE ROW Tail 0.40 square 0.40 square Tail Ø0.70 Recommended P oard Pattern LULTION (when = 4.6mm) + (when = 8.5mm) x (No. of contacts per row - 1) Ø Recommended P oard Pattern NO. OF ROWS 0 Single Row 1 Double Row HEIGHT 0 = 4.6mm, Tail = 3.00mm 1 = 8.5mm, Tail = 2.80mm M52-5 X X XX Gold NO. OF ONTTS PER ROW 02 to 40 ll dimensions in mm. 201

050") PITH 2.54 0.44 0.35 5.00 5.70 6.00 5.70 5.95 3.90 6.48 1.65 1.65 4.90 7.50 0.68 2.54 Recommended P oard Pattern LULTION x No.

30 rcher onnectors M52 Female Vertical Surface Mount Suitable for use with male pin headers with 0.46mm square pins. Twin beam contact for cost-effective reliability. ontact for Tape and Reel options. SINGLE ROW DOULE ROW mm (.050") PITH Recommended P oard Pattern LULTION x No. of contacts per row x (No. of contacts per row - 1) 0.68 Recommended P oard Pattern 0 Single Row 1 Double Row M52-5 X 5 XX Gold NO. OF ONTTS PER ROW 03 to 50 ll dimensions in mm. 202

65 Recommended P oard Pattern DOULE ROW 0.46 square 2.30 LULTION x No. of contacts per row x (No. of contacts per row - 1) 5.00 2.

31 rcher onnectors M52 mm (.050") PITH Male Vertical P Tail Suitable for use with female connectors shown on previous page. For alternative pin lengths, see pin header variants on following pages. SINGLE ROW 4.00 Ø0.65 Recommended P oard Pattern DOULE ROW 0.46 square 2.30 LULTION x No. of contacts per row x (No. of contacts per row - 1) Ø square 2.30 Recommended P oard Pattern M X XX 45 V Single Row W Double Row 45 Gold NO. OF ONTTS PER ROW 05, 10, 20, 25 ll dimensions in mm. 203

rcher onnectors M52 Male Vertical Surface Mount Suitable for use with female

For alternative pin lengths, see pin header variants on following pages.

SINGLE ROW DOULE ROW mm (.050") PITH No. 1 contact 0.46 square 5.00 0.

00 Recommended P oard Pattern P Single Row S Double Row LULTION x No.

32 rcher onnectors M52 Male Vertical Surface Mount Suitable for use with female connectors shown on previous page. For alternative pin lengths, see pin header variants on following pages. ontact for Tape and Reel options. SINGLE ROW DOULE ROW mm (.050") PITH No. 1 contact 0.46 square square Recommended P oard Pattern P Single Row S Double Row LULTION x No. of contacts per row x (No. of contacts per row - 1) M X XX Recommended P oard Pattern 45 Gold NO. OF ONTTS PER ROW 05, 10, 20, 25 ll dimensions in mm. 204

connector. ontact technical@harwin.com for further information, or search online for M52-XXX. Suitable for use with female connectors shown on previous pages.

33 rcher onnectors M52 mm (.050") PITH Pin Header Variants If you are unable to specify the connector you require from our standard range of rcher M52 connectors, use the order code below to create an application-specific connector. ontact for further information, or search online for M52-XXX. Suitable for use with female connectors shown on previous pages. TERMINTION STYLES Vertical P Tail Pin section is 0.46mm square. V Series W Series Extended P Tail 2.54 Pin section is 0.46mm square. E Series F Series 2.54 P mounting hole is Ø0.65mm. P mounting hole is Ø0.65mm Vertical SMT Pin section is 0.46mm square. For P pad layout see standard Male SMT pin header. P Series S Series Extended SMT Pin section is 0.46mm square. For P pad layout see standard Male SMT pin header. R Series T Series dimension is DIMENSION Example: 7.8mm = 078 DIMENSION Example: 5.0mm = 050 M52 - XXX XXX X XX Gold NO. OF ONTTS PER ROW 02 to 50 SINGLE ROW DOULE ROW V W Vertical E F Extended P S SMT R T Extended SMT ll dimensions in mm. 205

Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH

Archer Connectors. Archer Kontrol. 1.27mm (.050) PITCH rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.