PCB Hardware. Contents. SMT Test Points SMT Cable Clips SMT Jumper Links PCB Jumper Links PCB Terminals, Turret Lugs Spacers / Pillars / Standoffs
|
|
- Gillian Preston
- 6 years ago
- Views:
Transcription
1 PC Hardware Contents SMT Test Points SMT Cable Clips SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs
2 SMT Hardware Test Points Ideal for use with standard probes, clips and hooks. Can be placed using industry standard equipment. Suitable for automatic or manual test. High speed placement. Industry standard tape and reel packaging. Strong and durable. SMT HRDWRE Material: Packaging Format: Reel quantity S R: S R: S R: Copper lloy Tape & Reel 2,500 on a Ø330mm reel 2,500 on a Ø178mm reel 3,000 on a Ø178mm reel 2.00mm HIGH Recommended PC oard Pattern S R 1.40mm HIGH 1.15mm HIGH Recommended PC oard Pattern S R 1.00 Recommended PC oard Pattern S R ll dimensions in mm. 282
3 SMT Hardware Cable Management & Grounding Clips SMT HRDWRE Suitable for use with insulated cables with outer diameters Ø0.9 to Ø3mm and grounding braided coax cables. Cable clip can be soldered at same time as rest of board, reducing additional operation time required for mounting plastic clip types. Low profile & small footprint saves PC space. Material: Packaging Copper lloy Format: Reel quantity: Tape & Reel Ø330mm reel, see table C D 0.20 Recommended PC oard Pattern PRT NO. C D COX GROUNDING CLE RETENTION REEL QUNTITY S R Ø1.12mm 2 x Ø0.9mm 3,000 S R RG178, RG179, RG316 2 x Ø1.0mm 3,000 S R RG174, RG179, RG316 3 x Ø1.0mm, 2 x Ø1.5mm 1,500 S R n/a 2 x Ø1.5mm, 1 x Ø2.0mm 1,300 S R RG58 3 x Ø2.0mm, 1 x Ø3.0mm 800 ll dimensions in mm. 283
4 SMT Hardware SMT Fixed Jumper Link Designed to link PC tracks where through hole links are not possible. Typical applications include use on aluminium backplanes in power applications. High current. Small footprint. Low profile options available for space saving design. SMT HRDWRE Material: Copper lloy (S1621, S1911) Copper (S1731) Packaging Format: Reel quantity S R: S R: S R: Tape & Reel 5,000 on a Ø330mm reel 2,500 on a Ø330mm reel 4,000 on a Ø330mm reel 12.3mm LONG min Recommended PC oard Pattern S R 6.86mm LONG, 2.54mm HIGH 6.85mm LONG, 0.97mm HIGH min min Recommended PC oard Pattern S R 2.90 Recommended PC oard Pattern S R ll dimensions in mm. 284
5 SMT Hardware Removable Jumper Link - SMT Clip and ar SMT HRDWRE Simple & effective method for connecting across LED arrays and PCs. Vertical and horizontal configurations available. Connecting bars available in two lengths. SMT clips packaged in tape and reel to suit automated placement. llows easy replacement of defective arrays and PCs without the need to de-solder. SMT clips and bars ordered separately. VERTICL CLIP Specification Material: Stainless Steel Packaging format: Tape & Reel (10,000 on a Ø330mm reel) HORIZONTL CLIP Specification Material: Stainless Steel Packaging format: Tape & Reel (10,000 on a Ø330mm reel) x x Recommended PC oard Pattern S R Recommended PC oard Pattern 1.50 S R 23mm LONG REMOVLE R 15mm LONG REMOVLE R Specification Specification Material: Phosphor ronze Material: Phosphor ronze Packaging format: Loose Packaging format: Loose Ø0.70 S07-46 Ø0.70 S08-46 ll dimensions in mm. 285
6 PC Hardware Ø1mm Shorting Link Plugs Choice of insulated or un-insulated links. Insulated links supplied in a variety of colours, with a high-performance gold finish. Un-insulated links can be soldered directly into the PC for permanent linking. Can be used with individual PC sockets for hardware programming applications. PC HRDWRE INSULTED Style max Moulding: Contact: Finish Insulated: Un-insulated: PT UL94V-0 rass Gold See order code Electrical Current rating: 10 at 20 C Style 2 Ø ( = 10.16) ( = 12.70) 4.30 UN-INSULTED 3.20 max Ø1.00 Ø Ø max Recommended PC oard Pattern D308 X - XX D308 X - XX PITCH () STYLE mm mm mm mm 2 COLOUR 97 lue 98 lack 99 Red PITCH () mm mm mm FINISH 05 Gold 46 ll dimensions in mm. 286
7 PC Hardware Turned Terminals PC HRDWRE Material: rass with tin plating. Retention by swaging feature available. For swaging tool, change order code prefix to Z, and suffix to 00 (example Z ). Suitable for a variety of PC thicknesses from 1mm to 2.4mm. Ø1.00 Ø1.78 H H H H H mm 4.90mm 8.13mm 9.53mm 13.21mm 0.51mm 0.35mm 0.51mm 0.51mm 0.51mm PNEL THICKNESS 1.60mm 1.60mm 1.60mm 1.60mm 1.60mm MOUNTING HOLE Ø mm Ø mm Ø mm Ø mm Ø mm Ø0.92 Ø0.77 Ø0.50 Ø2.39 Ø2.39 Ø1.00 H H H H mm 4.47mm 4.47mm 5.70mm 0.51mm 0.51mm 0.51mm 0.38mm PNEL THICKNESS 1.60mm 1.60mm 2.40mm 1.00mm MOUNTING HOLE Ø mm Ø mm Ø mm Ø mm 0.51 Ø2.39 Ø2.39 Ø H H mm 6.37mm Ø0.93mm Ø0.77mm PNEL THICKNESS 1.60mm 1.60mm MOUNTING HOLE Ø mm Ø mm H H mm 5.05mm 6.07mm 4.48mm C Ø0.87mm Ø0.77mm PNEL THICKNESS 1.60mm 1.60mm MOUNTING HOLE Ø mm Ø mm ll dimensions in mm. 287
8 PC Hardware Turned Terminals Material: rass with tin plating. Retention by swaging feature available. For swaging tool, change order code prefix to Z, and suffix to 00 (example Z ). Suitable for a variety of PC thicknesses from 1.6mm to 3.2mm. PC HRDWRE ØD ØD ØD H H H H H mm 4.74mm 5.15mm 7.65mm 7.65mm 0.46mm 1.19mm 0.58mm 0.58mm 0.58mm C Ø1.02mm Ø1.91mm Ø2.39mm Ø2.36mm Ø2.36mm D Ø1.57mm Ø3.18mm Ø3.18mm Ø3.18mm Ø3.18mm PNEL THICKNESS 1.60mm 1.60mm 1.60mm 1.60mm 2.40mm MOUNTING HOLE Ø mm Ø mm Ø mm Ø mm Ø mm ØD H2071Z01 H H2072Z01 H2072ZL1 H2073Z01 H2074Z mm 6.29mm 6.52mm 6.52mm 9.12mm 8.74mm 1.78mm 1.01mm 1.24mm 1.24mm 1.78mm 1.60mm C Ø3.18mm Ø3.25mm Ø2.54mm Ø2.54mm Ø3.18mm Ø4.57mm D Ø4.75mm Ø3.96mm Ø3.96mm Ø3.96mm Ø4.75mm Ø6.35mm PNEL THICKNESS 2.40mm 1.60mm 1.60mm 2.40mm 3.20mm 3.20mm MOUNTING HOLE Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm D D C D ØD H H H H H mm 6.35mm 12.65mm 3.96mm 6.35mm 2.39mm 3.17mm 1.52mm 0.78mm 5.08mm C Ø3.18mm Ø3.18mm Ø3.90mm Ø1.83mm Ø3.18mm D 0.73mm 1.13mm 1.54mm 0.71mm Ø2.39mm THROUGH HOLE Ø1.06mm Ø1.74mm Ø2.22mm n/a Ø1.13mm PNEL THICKNESS 1.60mm 2.40mm 3.20mm 1.60mm 2.40mm MOUNTING HOLE Ø mm Ø mm Ø mm Ø mm Ø mm ll dimensions in mm. 288
9 Metric Spacers Clearance Spacers SPCERS Standard lengths available from 3 to 30mm. rass spacers: base material is free-machining brass, with nickel plating. luminium spacers: supplied with a clear passivation finish to prevent oxidation. Plastic material: Nylon 66 UL94V-2. CLERNCE FOR M3 THRED CLERNCE FOR M4 THRED ase material: Finish rass: luminium: rass, luminium or Plastic Nickel Clear Passivate ase material: Finish rass: rass or Plastic Nickel Ø4.76 (rass) Ø5.00 (luminium, Plastic) Ø6.35 (rass) Ø6.30 (Plastic) Ø3.30 (rass) Ø3.20 (luminium, Plastic) Ø4.40 (rass) Ø4.20 (Plastic) R30-6 XX XX XX R40-6 XX XX XX MTERIL 01 rass 20 luminium 70 Plastic LENGTH (mm) 03 to 16, 18, 20, 25, 30 rass, luminium 03 to 16, 18, 20, 25 Plastic FINISH 02 Nickel (rass only) 14 Passivation (luminium only) 94 White (Plastic only) MTERIL 00 rass 71 Plastic LENGTH (mm) 03 to 16, 18, 20, 25, 30 rass 03, 05 to 08, 10 to 12, 15, 18 Plastic FINISH 02 Nickel (rass only) 94 White (Plastic only) ll dimensions in mm. 289
10 Metric Spacers Threaded Female Spacers vailable in a variety of standard body lengths. rass spacers: base material is free-machining brass, with nickel plating. Plastic material: Nylon 66 UL94V-2. Longer thread lengths may not be threaded through the complete length, but have female threads at both ends. SPCERS HEXGONL CIRCULR ase material: rass or Plastic ase material: rass Finish rass: Nickel Finish rass: Nickel 5.00 /F (R25-100, R30-100) 5.50 /F (R30-101, R30-161) 7.00 /F (R40-100) Ø4.76 M2.5 (R25), M3 (R30) or M4 (R40) M3 RXX - XXX XX XX R Hexagonal, rass, M2.5 Thread R Hexagonal, rass, M3 Thread R Hexagonal, rass, M3 Thread R Hexagonal, Plastic, M3 Thread R Circular, rass, M3 Thread R Hexagonal, rass, M4 Thread FINISH 00 White (Plastic only) 02 Nickel (rass only) LENGTH (mm) 06 to 16, 18, 20, 25 R30-161, R to 16, 18, 20, 25 Other ll dimensions in mm. 290
11 Metric Spacers Threaded Male Pillars SPCERS vailable in a choice thread sizes, with a variety of standard body lengths. ase material is free-machining rass, with nickel plating. MLE/MLE MLE/FEMLE 5.00 /F M /F (R25, R30) 7.00 /F (R40) 5.00 (R25-300) 6.00 (R30-300) 8.00 (Others) R XX 02 M2.5 (R25), M3 (R30) or M4 (R40) Thread (minimum) LENGTH (mm) 04 to 16, 18, 20, 25, 30, 35, 40 Thread sizes are the same both ends for all standard spacers. FINISH 02 Nickel R M2.5 Thread R M3 Thread, 6mm Stud R M3 Thread, 8mm Stud R M4 Thread RXX - 30X XX 02 FINISH 02 Nickel THRED LENGTH LENGTH (mm) R R R R ll dimensions in mm. 291
12 Locking Spacers For further product information, please consult the applicable Technical Drawing online. LOW PROFILE SELF-LOCK SPCERS Material: Nylon 6/6 UL94V-2. Spacer design uses minimum board area. Recommended PC board thickness 1.60mm. Recommended hole size Ø4.00mm (R ) 3.80 (Others) RIGID SELF-LOCK SPCERS Material: Nylon 6/6 UL94V-2. Spacers have wide ribs with locking fingers to provide a secure, rigid fit with extra stability. Recommended PC board thickness 1.60mm. SPCERS M To fit Ø4mm hole LENGTH Ø3.80 Ø4.80 Ø R R R LENGTH R R R R R R R R R R R To fit Ø4.8mm hole R R SCREW FIXING SELF-LOCK SPCERS Material: Nylon 6/6 UL94V-2. Fit spacer to underside of upper board, then attach lower board to bottom of spacer with No. 6 (1/8") screw. Recommended hole sizes: Ø4.00mm (upper board), Ø3.60mm (lower board). Recommended PC board thickness 2.00mm (upper board). REVERSE LOCK SPCERS Material: Nylon 6/6 UL94V-2. Fit spacers from underside of board. Recommended PC board thickness mm. Recommended hole sizes: Ø4.00mm (upper board), Ø5.50mm (lower board) Ø LENGTH Fits into Ø5.50 LENGTH R R R R /F R R R R To fit No.6 screw R R Ø9.40 R R ll dimensions in mm. 292
PCB Hardware. Contents
PC Hardware Contents SMT Test Points SMT Cable Clips Coin Cell Holders SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationPC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
More informationPC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
More informationCatalog Snapshot.
Catalog Snapshot EMC Shielding Board Level Shielding EMC SHIELDING EMC shielding products improve PCB layouts by eliminating the need for soldering cans to the board. This wide range of products is suitable
More informationCatalog Snapshot.
Catalog Snapshot EMC Shielding Board Level Shielding EMC SHIELDING EMC shielding products improve PCB layouts by eliminating the need for soldering cans to the board. This wide range of products is suitable
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More information2.54mm (.100") Pitch Connectors
mm (.100") Pitch Connectors HRWIN plc Fitzherbert Road, Farlington, Portsmouth, Hampshire, PO6 1RT, UK Tel: (Sales) +44 (0) 23 9237 0451 Tel: (dmin) +44 (0) 23 9231 4545 Fax: +44 (0) 23 9231 4590 Sales,
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationKey features: M8 Series BUCCANEER. Full Contact Diagrams Page 130
UCCNEER ulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory
More informationCOMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number
More informationD-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
More information343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More informationNEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT
NEW ITEM AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A - TYPE FLANGE 3 CONTACT Features: Thermoplastic Shell Industry standard PC footprints. Vertical or Horizontal PC mounting. Precision machined pin contacts.
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More informationRight Angle 2.0mm Pitch Connector
AVX extends their board-to-board right angle connectors with a new 2mm pitch version, an addition to the existing versions 9155-300 with a 3mm pitch and 9155-500 with a 2.5mm pitch. This new connector
More informationInterface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More informationMCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS
PC BORD HRDWRE SECTION CONTENTS COMPUTER BRCKETS........... 123-125 COMPUTER BRCKET WORKSHEET. 126-127 MOUNTING BRCKETS................ 118-119 PC BORD CCESSORIES Board Guides..........................
More informationM20 and M22. (2.54mm and 2.00mm pitch)
M20 and M22 (2.54mm and 2.00mm pitch) M20 and M22 Connectors Great Design Flexibility Today s electronics and PCB designers are faced with many connector challenges, including applications with increased
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationTerminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks
Series A2000, LP2000 & C2000 Single Row Terminal A20510807WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG CU Screw Size:
More informationSSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
More informationFiltered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
More informationAPPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More information1.25mm Pitch Miniature Crimping Connector
1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationDynamic Series Connectors
D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can
More informationUSB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
More information0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
More informationUSB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
More informationTX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
More informationTerminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
More information0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationHigh-Reliability at 1.25mm pitch
High-Reliability at 1.25mm pitch Why a micro-miniature connector? A demand for a smaller footprint, an increasing number of high density opportunities, and a requirement for a lightweight connector solution,
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationMeet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
More informationGeneral Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationTop Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
More informationSINGLE ROW BREAKAWAY HEADER
SINGLE ROW REKWY HEDER 3986 SERIES SERIES. 3.96mm(0.156 ). Round Pin. For PC Solder! vailable in 1through 20 circuits! Mates with 3940, 3950, 3970, 3971 and 3972 series! Insulator Material: Nylon 6/6 UL
More informationGeneral Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationSingle Slot SMT Connectors for Card-Bus Based PC Cards
Single Slot SMT onnectors for ard-us ased P ards I14 Series P ard Standard ompliant oard Space-Saving SMT Unit Guide Unit Secure board retention Features 1. Space-Saving design facilitates pattern routing
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
More informationXSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationDirectory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
More informationCF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
More informationPower Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
More informationElma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
More informationFASTON Printed Circuit Board Tabs and Receptacles
FSTON Tabs and eceptacles Product Facts Full line of PC tabs and receptacles Straight and right-angle tabs available in 50, 87 and 0 series eceptacles produced in 50/05 x 03 or 05 Standard or low insertion
More informationORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
More information0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
More informationTable of Contents Interface Module Systems
UHNN Terminal locks Note: ll part numbers are RoHS ompliant. Table of ontents Interface Module Systems Overview (atalog Numbering ode) 196 Interface Modules 197-204 DIN 41612 onnector 198 Telco onnector
More informationTerminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series.
Series A2000, LP2000 & C2000 Terminal locks A201108WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32
More informationSECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationSECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
More informationTE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS PCB D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE
More informationFine-Coax Wire Connector for Portable Devices. FI-JH Series
COMPONENTS PRODUCT INFORMATION NEW Fine-Coax Wire Connector for Portable Devices FI-JH CONNECTOR MB-0179-1 November 2007 RoHS Compliant In addition to incorporating new functions such as one
More informationSMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
More informationSECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS
PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS........... 123-125 COMPUTER BRACKET WORKSHEET. 126-127 MOUNTING BRACKETS................ 118-119 PC BOARD ACCESSORIES Board Guides..........................
More informationModular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
More information2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
More information8525 Series. Hermetic connectors. Backshells aluminum version. Backshells stainless steel version. basic series I H 18 B 32 P N H
Linkto8526eries 8525 eries Hermetic connectors basic series 8525 I H 32 N H type obligatory suffix I solder fixing receptacle 2 square flange receptacle 7 jam nut receptacle hermetic version H stainless
More informationMini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
More informationcpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies
cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies IEEE 1101.10 and PICMG 2.0 Compliant Compact size and unique aesthetics Innovative positive locking, simple push button
More informationAC SERIES - A TYPE THERMOPLASTIC XLR PCB CHASSIS CONNECTORS
AC SERIES - A TYPE THERMOPLASTIC XLR PCB CHASSIS CONNECTORS The AC series, A type XLR chassis receptacles have been designed and manufactured with the Original Equipment Manufacturers (OEM) needs in mind.
More informationBOARD LEVEL POWER SEMICONDUCTOR HEAT SINKS
217 SERIES Surface Mount D 2 PAK,, SOT-223, SOL-2 Compatible with surface mount technology (SMT) automated production techniques for ease of assembly and a variety of soldering methods, these heat sinks
More informationDX07 Series USB Type-C Connector
v3.0 DX07 Series USB Type-C Connector Product Information Module Japan Aviation Electronics Industry, Ltd. Proprietary. Copyright 2017, Japan Aviation Electronics Industry, Ltd. JAE DX07 Series USB Type-C
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.5mm & 3.5mm AUDIO JACKS STEREO & MONO EARPHONE JACKS ASJ SERIES
.mm &.mm AUDIO JACKS INTRODUCTION: Adam Tech ASJ Series Stereo Jacks are a broad range of.mm and.mm jacks used primarily in computer and multi-media audio applications. This series provides a multitude
More information2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationHigh Current Products Catalog Revised 4-01
Product Facts Pins and sockets have low insertion force High current ratings with very low resistance All plated products are gold or silver plated Louvertac bands have a temperature range from 196 C to
More informationHigh Current Products Catalog Revised onlinecomponents.com
Interfaces Product Facts Pins and sockets have low insertion force High current ratings with very low resistance All plated products are gold or silver plated Louvertac bands have a temperature range from
More informationDatamate High-Reliability Connectors
Datamate High-Reliability Connectors Industry recognised, British Standard approved Datamate is the field-proven high-reliability range of choice for many industries. Approved to British Standard 9525-F0033
More informationQR/P4 SERIES. Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels
QR/P4 SERIES Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels General QR/P4 Series is a series of small connectors for rack and panel application. This is a smaller-size version
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More information3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications
More informationD-SUBMINIATURE (D-SUB) ECONOMY RANGE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE (D-SUB) OVERVIEW FCI s D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven
More informationThrough-Hole and Surface Mount Assembly Systems
Through-Hole and Surface Mount Assembly Systems Zierick s family of full and semi-automated terminal insertion systems simplifies your applications, and provides the greatest range of functionality and
More information2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationKey features: M5 Series. Buccaneer. Full Contact Diagrams Page 120
The most compact connector type in the MSeries range, Bulgin s waterproof M5 sensor connectors come in straight and angled forms with or overmolded cable option s and a variety of panel mount receptacles.
More information