Tough, Compact... and Portable

Transcription

1 INERTER 80 Tough, Compact... and Portable ArcMaster 400 MST power source comes with: Power cord 2 x dinse mm plugs Operating manual Year * Quick Specifications Processes STICK () TIG () Lift MIG (GMAW) Flux Cored (FCAW) Air Carbon Arc Cutting & Gouging () Industrial Applications Maintenance & repair Industrial manufacturing Construction Input oltage 80/ AC Phase Input Frequency / Rated Duty Cycle 400A/26@25% (40 C) 400A/26@0% (25 C) 400A/6@25% (40 C) 400A/6@0% (25 C) 00A/22@60% (40 C) 00A/22@70% (25 C) 00A/2@60% (40 C) 00A/2@70% (25 C) Output Range 5-400A Weight 55 lb (25 kg) Order Information Part No: Description: ArcMaster 400 MST Excellent Performance! Embedded microprocessor with digital controls, delivering full multi process CC/C with perfectly smooth, stable arc characteristics for MIG solid and Flux cored wires, Air Carbon Arc cutting and Gouging, E6010 Cellulose and low hydrogen electrodes. Smart Logic! Prevents damage to the internal components if installed to improper voltage. Thermal Overload Protection! Indicator alerts the operator if duty cycle is exceeded or airflow is blocked. Twist Lock Output Terminals! Allows for easy polarity changing and cable connection. Remote Receptacle Fitted! Makes compatibility of Thermal Arc, competitive wire feeders and remote devices simple. Arc Control! When STICK welding the operator can fine tune the arc and prevent the electrode from sticking and creating an inclusion. Easy to use! Simple, user friendly setup and operation. Smart Warning Diagnostics! Alerts operator to power supply abnormalities. Standards Compliant Integrated RD! oltage Reduction Device reduces the OC when the power supply is not in use. This all but eliminates the risk of electrocution to the operator from the secondary welding circuit. Job Save & Load! Allows operator to store up to 5 exact optimized welding parameters then digitally recall them with perfect repeatability. Lift Start TIG! Provides TIG arc starting without use of high frequency. Hot Start! Adjustable Hot Start for optimized starting performance. Rack Systems! Available in 4, 6 or 8 pack packages with electricals. * Limited warranty. Refer to warranty schedule.

2 INERTER 80 Features # Inbuilt Smart Logic prevents damage from connectiton to incorrect voltage. Integrated RD. Simple to use operator interface. Digital Display includes olt/amp meter, parameter setting, thermal overload protection & warning circuitry indicator. Process switch: STICK, Lift-Start TIG and MIG functions. 14 & 19 pin remote receptacle. Digital Process Control: Hot start, Arc Force, Inductance and Save/Load function. Twist lock mm dinse output terminal

3 INERTER 80 Specifications # ArcMaster 400 MST Input voltage 80/ AC, phase Rated output 400A/26@25% (40 duty cycle 400A/26@0% (25 C) 400A/6@25% (40 C) 400A/6@0% (25 C) 00A/22@60% (40 C) 00A/22@70% (25 C) 00A/2@60% (40 C) 00A/2@70% (25 C) OC 65 Output range 5-400A Approvals CSA (pending); IP2S IEC (CE) Primary cable length m Dimensions & Weight Dimensions HxWxD 16.5 x 8. x 17.7 in (420 x 210 x 4 mm) Weight 55 lb (25 kg) Duty Output OC Output No. phase Input oltage (AC) ka kw Cycle Amps oltage 400 Input Amps Output 25% % % No Load Output Characteristics # STICK PROCESS LIFT TIG PROCESS MIG PROCESS () OC () OC () OC A 10 5A 400A 420A (A) 25A 400A (A) 5A 400A (A)

4 INERTER 80 Control Panel # RD - (oltage Reduction Device) lights indicate on or off 2. STICK/MIG Parameters - Pressing this button scrolls through the STICK functions (Hot Start, Arc Control, Current) or MIG functions (olts, Inductance).. Digital LED display welding amperage and voltage or parameter values are displayed in these windows. Internal warnings such as over temperature, low or high input voltage applied are signaled to the operator by a warning sound and error message on the screen Save/Load Buttons - By using the Save & Load buttons the operator can easily save up to 5 welding programs. 5. Control knob allows the operator to adjust the output amperage or voltage within the entire range of the power source, also used to set each parameter value. 6. Process functions pressing this button scrolls through the output process modes (STICK, Lift TIG, MIG ). 7. Remote current function - pressing this button enables remote current. 8. Remote contactor function - pressing this button enables remote contactor on or off.

5 INERTER 80 Options & Accessories # Hand Held Pendant Part No Includes contactor On/Off switch & current control with 7.6m, 25ft cable and 14-pin male plug. Foot Control Part No m, 15ft Part No m, 25ft Contactor On/Off & current control with cable & 14-pin. Extension Cable Part No m, ft Part No m, 15ft Part No m, 25ft Part No m, ft Part No m, 75ft With 14-pin male plug and 14-pin female cable receptacle. Torch Switch On/Off Part No m, 25ft Torch mounted with 14-pin male plug. Torch Switch On/Off w/current control Part No m, 25ft for CK9 Handle Part No m, 25ft for CK17 Handle Part No m, 25ft for CK26 Handle Torch mounted with 14-pin male plug.

6 INERTER 80 Ordering Information # PRODUCT PART NO. DESCRIPTION QTY PRICE ArcMaster 400MST Power supply only: includes 400MST with power cord and 2 each dinse mm plugs ACCESSORIES Remote/TIG Plug Remote or TIG torch button Remote/TIG Clamp To fit 14 pin plug Hand Held Pendant Includes contactor On/Off switch and current control with 7.6m, 25ft cable and 14-pin male plug Foot Control Contactor On/Off and current control with 4.5m, 15ft cable and 14-pin male plug Contactor On/Off and current control with 7.6m, 25ft cable and 14-pin male plug Extension Cable m, ft with 14-pin male plug and 14-pin female cable receptacle m, 15ft with 14-pin male plug and 14-pin female cable receptacle m, 25ft with 14-pin male plug and 14-pin female cable receptacle m, ft with 14-pin male plug and 14-pin female cable receptacle m, 75ft with 14-pin male plug and 14-pin female cable receptacle Torch Switch On/Off m, 25ft torch mounted with 14-pin male plug Torch Switch On/Off w/current control m, 25ft torch mounted with 14-pin male plug - adapts to CK9 torch handle m, 25ft torch mounted with 14-pin male plug - adapts to CK17 torch handle m, 25ft torch mounted with 14-pin male plug - adapts to CK26 torch handle TOTAL QUOTE PRICE