H Further information under.

Transcription

1 Product CATALOg Switches & Sensors H Further information under

2 Approval marks ENEC UL (USA) CSA (Canada) VDE UL (USA + Canada) CSA (Canada + USA) Terminal Symbols Quick-connect terminal Solder terminal Short solder terminal PCB terminal PCB terminal angled left PCB terminal angled right Cable Terminal strip Push-in terminal Snap-in terminal Cut terminal Screw terminal Socket terminal Actuator symbols Straight lever Lever simulated roller Lever with roller Differential lever Spring lever Spring lever bent Spring lever with molded cam Lever with adjusting screw Lever simulated roller with adjusting screw Lever with adjusting screw and roller Lever with cams Housing cams Pushbutton Rotary shaft Standard actuator Mushroom-shaped actuator Abbreviations technical drawing ad Adjustable OP Operating position AN Anode OP NC Operating positions normally closed contact BL Block OP NO Operating positions normally open contact FH Fixing hole, locating hole fixing pin OR On request FI Fields for function indicator RC Recommended cut-out FP Free position RL Reference level FX Fixing pin SH Shap-in hole ju Adjusted SL Symbol limit MC Marking cathode SP Solder pads MF Mounting frame ST Slide travel MP Measuring point SW Switching position OFF Off TH Terminal hole off-range Zero position tk Thick OG Operating range to Top ON On TP Permissible total travel position Switching frequency (abbreviations) e. g. 5E4 switching cycles switching cycles

3 Content Marquardt Because cutting-edge technology is based on knowledge and ingenuity 2 Because product variety allows tailor-made designs 3 Technical information General technical information 4 About the catalog 4 Code of Conduct 4 Approvals 4 Approval marks 4 CE mark / Declaration of installation 5 RoHS (Restriction of the Use of Certain Hazardous Substances) 5 REACH (EG/1907/2006) 5 Household Appliances Standard IEC/EN Rating for alternating current voltage (AC) 5 Rating for direct current voltage (DC) 5 Life endurance 5 Gold-plated contacts 6 Switching frequency 6 Contact distance 6 Proof tracking 6 Inrush current 6 Ambient temperature 6 Ambient conditions 6 Isolation characteristics 7 Storage conditions 7 Soldering conditions 7 IP protection 8 EMC (electromagnetic compatibility) 8 Appliance safety law 8 Terminal symbols 8 Contact resistance 8 Switching functions 9 Special information about snap-action switches 10 Switching reliability 10 Bounce time 10 Switching time / switching travel 10 Operating force-travel diagram 10 Contact force-travel diagram 10 Positions-forces-travels 10 Further information 11 Order numbers 11 Customized solutions 11 Stock versions / minimum order quantities 11 Modifications / catalog data 11 Application note / liability 11 Switches and sensors Switches and sensors tab overview 13 Rocker switches 15 Series Smallest single-pole rocker switches 18 Series Single and double-pole rocker switches 21 Series Single-pole rocker switches illuminated with LED 36 Series Single-pole round rocker switches 38 Series Miniature double-pole rocker switches 42 Series Miniature double-pole rocker switches 45 Series Single-pole rocker switches IP Series Single and double-pole rocker switches 50 Series Single and double-pole rocker switches 56 Series Double-pole rocker switches IP Series Single-pole rocker switches 75 Series Single and double-pole rocker switches 77 Series Single and double-pole rocker switches IP 66/IP Series Three-pole rocker switches 94 Pushbutton switches 95 Series Single and double-pole pushbutton switches 98 Series Single and double-pole pushbutton switches 105 Series Smallest single-pole pushbutton switches 109 Series Double-pole pushbutton switches 110 Series Round pushbutton switches 112 Series Single-pole pushbutton switches 114 Series Single and double-pole pushbutton switches 116 Series Single and double-pole pushbutton switches 120 Series Single and double-pole pushbutton switches 124 Toggle Switches 129 Series Three-pole toggle switches 131 Series Single and double-pole toggle switches 132 Series Single and double-pole toggle switches 135 Series Single-pole toggle switches 139 Slide Switches 141 Series Double and four-pole slide switches 143 Series Single-pole slide switches 147 Rotary switches 149 Series Powerful rotary switches 151 Foot switches 153 Series Ergonomic foot switches 155 Series IP 65 / 67 protected foot switch 158 Tact and key switches 161 Series Tact switches 163 Series Key switches 165 Series Key switches 171 Series Key switches 173 Snap-action switches 175 Series Subsubminiature snap-action switches IP Series Subminiature snap-action switches 183 Series Subminiature snap-action switch IP Series Miniature snap-action switches 197 Series Miniature snap-action switches 201 Series Rotary shaft snap-action switches 209 Series Open snap-action switches 211 Series Single-pole snap-action switches 215 Series Snap-action switches IP Series Snap-action switches 220 Series Single-pole pushbutton switches 222 Micro-signal switches 225 Series Micro-signal switches 227 Sensors 233 Series Flow sensors 235 Series Analogue pressure sensors 237 ECO 241 Series 1550 ECO - Single-pole rocker switches 243 Series 1086 ECO - Single-pole pushbutton switches Series 3450 Keyless-Go-System 251 Index Index of part numbers 253 Part numbers 253 Lamps 256 Accessories 257 Notes 260 Sensors Micro-Signal Switches Snap-Action Switches Tact and Key switches Foot Switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches 1 ]

4 Because cutting-edge technology is based on knowledge and ingenuity. The Marquardt Group was established in 1925 and, in spite of becoming a Global Player, has remained an independent family enterprise. With its two business units Automotive and Switches, Sensors & Controls, the Marquardt Group with its 12 international locations, is present world-wide in all important markets with more than 6,000 employees in all. Every year, we invest more than seven percent of our turnover in research and development not to mention the use of modern development tools, simultaneous engineering and an efficient testing system. Moreover, our corporate culture offers ample scope for unfolding the inventive genius of our employees. As a result, new ideas come up time and again, which are materialized into marketable cutting-edge technologies. The Switches, Sensors & Controls division develops, produces and sells its products in a number of industries and applications. Apart from industrial applications, our products are used in power tools, household appliances, cleaning systems, drive technology, heating and air-conditioning technology as well as Off-Road vehicles. We have the necessary technical knowhow, innovative strength, long-term experience and comprehensive manufacturing expertise required in these fields. This yields innovative and reliable products that feature promising designs tuned to individual requirements. Our products range from the standard switch to complex customer-specific systems. They are suitable for small-scale and large-scale production. With distinct production engineering, worldwide manufacturing options, high quality standards and durability of our products, we achieve customer satisfaction and thereby ensure our competitive ability. These customer- and market-specific solutions have made Marquardt a strong partner of the power tool and electrical industry as well as a technology leader. We are at your service in all the international markets. Marquardt standard switches are used in a wide range of industrial and electrical applications. Factors such as reliability, safety, design, innovative solutions and cost-efficiency are of utmost importance. Marquardt offers a very broad and technically sophisticated product portfolio based on many years of experience. Our standard switches are longlasting and preferred because of their high performance. For us, demanding customer requirements are a welcome challenge. You can order various switches by selecting them directly from our up-to-date online product catalog. Whether mains or signal voltage, manual or mechanical actuation, with or without lighting we help you to find the right solution.

5 Because product variety allows tailor-made designs. Marquardt switches and sensors for a wide range of applications Medical and laboratory technology Office communication Industrial applications Small household appliances Large household appliances Cleaning & drive applications Building technology Construction and agricultural machinery Heating-, ventilation- and air conditioning technology Leisure vehicles Find out more at Power tools Automobiles Sensors Micro-signal Switches Snap-Action Switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton switches Rocker switches 3 ]

6 General technical information Sensors Micro-Signal Switches Snap-Action Switches Tact and key switches Foot Switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches About the catalog This catalog provides an overview of the wide range of Marquardt standard switches. The portfolio includes rocker switches, pushbutton switches, toggle switches, slide switches, rotary switches, foot switches, power tool switches, key switches, snap-action switches, micro-signal switches and sensors. Basic types are distinguished within a series to group products with identical properties, e.g. the size. The technical data and specifications are typical characteristics which can vary depending on the product. In addition to the standard program, a number of modified, customized variants and special products and modules are available on request. All standard versions are listed with their order numbers. The order numbers of other versions and further information are available on request. Sample switches, approvals and installation drawings with tolerance data can be provided. The high quality amd durable switches from Marquardt are used in many different applications. We are constantly working on new developments and customized versions. Please ask for further information. The current Marquardt product program can be found in our online product catalog with filter functionality at www. marquardt-switches.com All the products in our entire delivery program have one common feature: The consistently high quality level which has made us the favorite supplier of leading manufacturers worldwide. We are certified according to the most up to date automotive quality norm ISO TS 16949:2002 as well as the ISO 9001 naturally. The ISO 9001 is integral part of the ISO TS The latest valid documents for it are downloadable from our webpage. Quality is a premium for us. Code of Conduct The self declared Code of Conduct is very important for Marquardt. It describes the basic rules of the ethical and legal behavior among each other, but also with business partners, public authorities and other third parties. Please contact us for more details. Approvals Almost all Marquardt switches have been tested in accordance with EN or IEC and designed for the application conditions specified therein unless specified otherwise. They carry the uniform European approval mark ENEC. The approvals for the USA and Canada are granted in accordance with UL 1054, on request also already in accordance with UL rd ed. or CSA In the year 2015 all approvals according UL 1054 und CSA 22.2 No. 55 expire and will be replaced by the UL Marquardt started with the conversion and re-evaluation for a smooth process for our customers already. The end device approval requirements for the target market China changed by middle of Switches must not be CCC certified generally, but the freely CQC approval simplifies the end device approval. CQC approvals are available for some standard switches. Please contact us for more details and support. Please see the catalog for the respective granted approvals. A list of the approved Marquardt products can be found on the web pages of the respective test bodies (e.g. VDE, KEMA, UL and CSA). We will provide the appropriate certificate on request. Approval marks 7 ENEC Europe ß VDE Germany 1 UL USA 4 CSA Canada 5 ccsaus Canada with confirmation of the national US requirements 2 culus USA with confirmation of the national Canadian requirements CQC freely Chinese approval mark Approval marks specified in the series overview are product-dependent. That means that the products are assignable in the tables based on the rating specifications (black print Europe / blue print North America). The exact assignment of the approval marks are specified on the customer drawing for each product. The drawings are available as download from the online product catalog at \ 4

7 General technical information CE mark / Declaration of installation The CE mark is an identification according to EU law for certain products with regard to the product safety. It is not a seal of quality (quality mark). By attaching the CE mark, the manufacturer confirms that the product complies with valid European regulations. The CE mark does not mean that the product has been checked for compliance with regulations by an independent body. Following revisions of the EU regulations in 2007 some of our switches have no labeling obligation, some are subject to the low voltage directive and some are subject to the machine directive. The CE mark and the issuing of the declaration of conformity depend on the respective situation. A CE mark is not prescribed for the components but for the smallest packing unit. RoHS (Restriction of the Use of Certain Hazardous Substances) From July 1, 2006 no more new electrical and electronic products may be offered in the EU which do not comply with the RoHS directive. The use of lead, mercury, hexavalent chromium, cadmium and the flame inhibitors containing bromide PBB and PBDE is prohibited for the protection of man and the environment. Compliance with the legal regulations is a matter of principle for Marquardt. This means all necessary measures for the implementation of the RoHS guideline have been done already, including suppliers. In our products are no forbidden materials included restricted by RoHS (lead, cadmium, chrome (VI), mercury and polybrominated flame retardant) anymore. The exception is the integrated printed circuit board (PCB) of the product series As far as we know and based on the information available to us from our suppliers, the products presented in this catalog meet the requirements of the EU Directive 2011/65/EU (Edition ). REACH (EG/1907/2006) REACH stands for Registration, Evaluation, Authorization and Restriction of Chemicals. Marquardt is anxious to develop and produce all products in compliance with applicable regulations, including the REACH regulations. Please contact us for more information. Household Appliances Standard IEC/EN Various switches in the Marquardt product portfolio are conform with the Household Appliance Standard IEC/ EN :2001/2002, chapter 30. These switches are identified by a G in the specification or drawing and on the label of the smallest packing unit. Materials are used here which comply with the values for the glow-wire-flammability index (GWFI) and the glow-wire-ignition-temperature (GWIT) demanded by the standard. The appropriate switches are labeled in the catalog in the product tables of the individual series. The appropriate certificate with the confirmation of conformity is available on request. Rating for alternating current voltage (AC) The electrical reference values, i.e. the maximum permissible electrical loads in continuous operation, are specified for the respective switch series. Most Marquardt switches are suitable for ohmic resistance load and motor load. In the specification of the reference power using the bracket notation, e.g. 16 (4) A 250 V AC, the value in front of the brackets indicates the switch-off current and the value in brackets the nominal motor current. In switches which are additionally approved by test bodies in the USA (UL) and Canada (CSA) the corresponding ratings according to North American standards are listed additionally in blue. The motor loads may also be shown as HP (Horse Power) values according to North American conventions. Rating for direct current voltage (DC) Since the range of DC loads is very wide and extensive and also depends very greatly on the application, no DC values are specified for the majority of the series in this catalog. Explicit tests are recommended for this. Tests which have already been carried out are available on request and the results can be used as references. As a rule of thumb it can be assumed at low currents that the specified alternating current values (AC) correspond to the direct current values when the life is reduced to about one third. In series with DC voltage specifications the specified current always refers to an ohmic load. If inductive or capacitive loads are available, the application must be checked by tests with the original load. Life endurance The mechanical life endurance is the number of possible switching cycles without electrical loading of the contacts whilst the electrical life endurance is determined with the permissible rated electrical power for the contacts. The lower the electrical load is, the closer the electrical life is to the mechanical life when using the switch in the appliance. Sensors Micro-signal Switches Snap-Action Switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton switches Rocker switches 5 ]

8 General technical information Sensors Micro-Signal Switches Snap-Action Switches Tact and key switches Foot Switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Gold-plated contacts For applications with a rating of < 300 mw or < 12 V we recommend switches with gold-plated contacts, also for applications with rare actuation or in a sulfurous atmosphere or other corrosive environments. Minimum currents are not especially defined, but can be assumed in a range down to 1 ma. Switching frequency For switches which are expected to be actuated more than times a year, the test bodies prescribe an electrical life endurance of > switching cycles. The majority of our switches meets these requirements and is marked by the 5E4 symbol ( switching cycles) as an additional specification in the rating data. Switches without specification of the switching cycles in the rating data are approved for a switching frequency of cycles. These data refer to the load which is typical for and described in the IEC standard. For clear differing, e.g. slower or faster actuations, we will be glad to advise you! Contact distance The majority of our appliance switches and some of our snap-action switches have a contact distance which enables full disconnection from the mains. The opening distances are even more than 3 mm in most cases. Switches which are not suitable for full disconnection are marked with the µ symbol. The switch standard IEC demands a contact distance of > 1.5 mm, the Household Appliances Standard EN60335 < 3 mm depending on the application for full mains disconnection. In switch variants with < 3 mm the test bodies usually acknowledge the mains plug or a disconnection device in the installation as a disconnection from the mains. Ask your test body if in doubt. Proof tracking The proof tracking (PTI/CTI value) indicates at what voltage the proof tracking test is passed. The tracking distance is the shortest distance along the surface of the insulating material between two conductive parts. The values specified in the catalogue correspond to the division according to EN or IEC Inrush current Short capacitive peak currents mainly occur when switching devices with power supply units (e.g. computers, printers, fax machines, etc.). The duration of these currents is typically < 10 ms. The test conditions with a special test circuit are defined in EN or IEC Values of the possible capacitive inrush currents are available for most of our appliance switches. They are labeled with the specification of the continuous current and the maximum inrush current as well as the voltage, e.g. 5/100 A 250 V AC. Guideline for the inductive inrush current is 6 times of the specified motor current described in brackets (e.g. 24 A at 12(4) A). Please contact us in case of doubt. Ambient temperature The designation of the permissible ambient temperature with e.g. T 85 means that the switch can be used for a maximum ambient temperature of 85 C according to the test criteria of the European safety standards (EN or IEC ). The identification T85/55 indicates that the terminal side of the switch is suitable for an ambient temperature of 85 C, whilst the actuating part (e.g. rocker) is subject to the room temperature of 55 C demanded by the standard. Using the switches outside the permissible temperature range and in a very humid or corrosive atmosphere can impair the functional capability. For UL-approved switches, the ambient temperature is determined by the RTI (Relative Temperature Index) of the used materials. Generally, the permissible ambient temperature of polyamides is 65 C. Switches for higher ambient temperatures are available on request. Ambient conditions The ambient conditions must be considered for the individual application completely. For our switch the use of vapors, glue, silicon etc. should be avoided, because it can change the contact resistance negatively. Aggressive liquids, salts and strong durable UV light can influence or damage the surfaces. \ 6

9 General technical information Isolation characteristics Devices have to be developed and constructed in a way that they work safely for conventional use. To work in a safe way an adequate isolation is needed in order to protect against the danger of current. The measurements of this insulation is based on a protection target which also has an adequate protection against electric shocks even if there is an facile fault. This includes a protection against direct and indirect contact. This target can be achieved by so called Basis Insulation and the connection of all metal parts, which can have dangerous touch voltage in case of failure, with the protective conductor of the passed conduct, of the building installation like they are made in appliances with protection class I. by Basis Insulation and additional insulation (double insulation) in appliances with protection class II Enforced insulation likewise in appliances with protection class II Most Marquardt switches are constructed for appliances with protection class II, which means that they can be used without additional safety measures for all other appliances independent from protection class (cf. DIN en , Kap annotation). If there are deviant characteristics they are observed in the specification. The necessary testing voltage to appoint the electric strength in regard of the over voltage category II and a pollution degree II is defined in IEC Basis Insulation 1500 V Additional Insulation 1500 V Enforced Insulation 3000 V This means that the switches are tested and is proven that they are able to allow an adequate protection. Please consider the allowance for the current appliance standards of the application which include different allowances unlike this general rules. Storage conditions The delivered products must be stored in the original Marquardt packaging in a temperature range between 5 and 45 C and 30 to 75 % relative humidity. The storage time of 12 months may not be exceeded. Storage in different containers and different climates may impair the properties of the product. Products with solder terminals can be stored under the following conditions: Temperatures between 5 C and 40 C Mean relative humidity below 50 % (relative humidity max. 85 %) No condensation and sulfurous environments We recommend to check the processing results of the solder terminals in case of different storage conditions or when exceeding a storage time of more than 6 months. Soldering conditions 1. Recommended handling instructions for leadfree hand soldering The basis for the solderability of the products in this catalog in the as-delivered state is DIN IEC We recommend: Soldering devices electronically controlled soldering station with the typical power consumption of VA Solder flux-filled solder wire, flux type Solder temperature 350 C ±10 C (setting on the appliance) Soldering time 2 to 3 s Notes: No force may be applied to the switch terminals during soldering, otherwise the switch properties (operating position etc.) could be changed. Longer soldering times and multiple soldering can impair the mechanical properties of the solder point and adjacent areas. When using flux, make sure that no flux gets inside the switch via the terminals. In such cases, the switch may not be soldered upside down, i.e. with the terminals on top. In open switching systems the soldering fumes must be kept away from the switch by suitable means. Sensors Micro-signal Switches Snap-Action Switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton switches Rocker switches 7 ]

10 General technical information Sensors Micro-Signal Switches Snap-Action Switches Tact and key switches Foot Switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches 2. Recommended handling instructions for leadfree wave soldering Soldering profiles are published in DIN IEC which must be adapted to the respective modules and the production conditions. Typical and maximum values: Pre-heating duration 80 s typical at 110 C, max. 125 C Wave soldering duration 2-7 s at 235 C, Tmax. 245 C Gradient pre-heating max. 2 C/s Gradient cooling max. -4 C/s Tmax These notes are guidelines which must be adapted respectively to the concrete process. IP protection pre-heating soldering The IP protection according to DIN EN and IEC specified in our documents refers to the actuating side of the switch unless stated otherwise. The customer must provide the seal between the switch and customer appliance and test for leaks at this point. EMC (electromagnetic compatibility) cooling Marquardt switches for use in appliances meet the requirements for interference emissions in accordance with EN when they are used according to our specifications. Requirements for interference suppression in the appliances can be found in the appliance or EMC specifications. Appliance safety law If you need to observe the valid German appliance safety law, we recommend to use switches which have been tested and approved according to the specifications EN or VDE Switches without approval marks must be tested by the approval body in connection with your appliance. Terminal symbols Quick-connect terminal Solder terminal Short solder terminal PCB terminal PCB terminal angled to left PCB terminal angled to right Socket terminal Cable Terminal strip Push-in terminal Snap-in terminal Cut terminal Screw terminal Contact resistance The contact resistance is the electrical resistance which can be measured at the switch terminals with closed contacts. The data refers to unwired contacts in new condition with a typical measuring current of greater than 100 ma. For silver-based contact materials this value is below 100 mω (measuring current 1 A at 12 V DC), for gold-based contact materials below 50 mω. \ 8

11 General technical information Switching functions ON/OFF switch (SPST, DPST) Normally open contact / pushbutton (SPNO, DPNO) Changeover switch (SPDT, DPDT) Changeover switch with OFF position in center (SPDT-Center OFF, DPDT-Center OFF) ON/OFF switch with signal lamp (SPST-Illuminated, DPST-Illuminated) Normally closed contact / pushbutton (SPNC, DPNC) Changeover switch / pushbutton (SPDT momentary, DPDT momentary) Lamp Sensors Micro-signal Switches Snap-Action Switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton switches Rocker switches 9 ]

12 Special information about snap-action switches Sensors Micro-Signal Switches Snap-Action Switches Tact and key switches Foot Switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Switching reliability Best switching reliability is achieved with fully exploited the pretravel and overtravel so that these should be fully exploited in the concrete application. Another criterion is the contact force which depends on the operating force. Switches with high contact forces should be chosen if possible. Bounce time The bounce time is the time between the first closing of the contacts (switch-on signal) and the last time the contact resistance drops below a given threshold value. The values are typically below 5 ms at typical actuation speeds of approximately 80 mm/s. Switching time / switching travel Switching time/travel is the time or distance which the switching system requires to get from the first opening of the previously closed contacts to the first flow of current through the contacts closed after the snap-action. The respective operating position or release position must be exceeded reliably. Please ask about applications with very slow actuating speeds or applications in which the actuation of the switch is controlled by its switching process. Operating force-travel diagram total travel force operating force difference force release force F Contact force-travel diagram F free position pretravel release travel 0 release position max. F pretravel max. free position Normally closed Normally open total travel position operating position release position difference travel overtravel return travel total travel overtravel operating position difference travel total travel release travel return travel s s Positions-forces-travels Free position Operating position Total travel position Release position Operating force Release force Difference force Total travel force Pretravel Overtravel Return travel Release travel Difference travel Total travel Position of the actuator in which no external force is applied. Point on the actuator travel at which the snap mechanism is irreversibly set in operation. Position of the actuator at the end of the permissible travel. Point on the actuator travel at which the snap mechanism returns to its initial position. Force necessary on the actuator to move this from the free position over the operating position. Force to which the operating force must be reduced for the snap mechanism to return to the initial position. Difference between operating force and release force. Force necessary to keep the actuator in the permissible total travel position. Distance between free position and operating position. Distance between operating position and total travel position. Distance between total travel position and release position. Distance between release position and free position. Distance between operating position and release position. Total of pretravel and overtravel or return and release travel. The application conditions must be checked in advance for continuously actuated snap-action switches. \ 10

13 Further information Order numbers The standard products in every series are shown in a table form with their most important technical characteristics and their 8-digit order numbers. The accessories have a 9-digit order number. Customized solutions The series and products shown in this catalog are only an excerpt from the complete Marquardt product range. One of Marquardt s strengths is the implementation of customer-specific requirements. This includes services such as cable assembly, extended or modified functions, other colors, labelings and designs as well as the integration into complete modules and systems. The possibilities on request stated in the series must be examined individually. We offer you worldwide contacts for these services. Stock versions / minimum order quantities Many of our standard switches are usually available immediately ex-stock in quantities of at least one packing unit (PU). These versions are marked accordingly as a stock version in the tables of the individual series. Please ask about delivery times for the unmarked versions. For the non marked products a minimum order quantity is required. Delivery time is on request. Smaller quantities should be inquired at our distributors. A list of all switches can be found on page 253. The stock versions are marked by a dot and the respective packing unit (PU) is also listed. Modifications / catalog data We reserve the right to make technical modifications and improvements to our products. Data in the catalog (e.g. dimensions, photos, diagrams) are not binding. Specifications, samples and installation drawings with tolerance data will gladly be provided on request. Application note / liability Since all the data in this catalog refers exclusively to the products delivered by us, you must check whether our products are suitable for your intended application yourselves. We will be glad to help you with advice and information. Our liability is governed exclusively by our Terms of Delivery and Payment which we will gladly send to you on request. Sensors Micro-signal Switches Snap-Action Switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton switches Rocker switches 11 ]

14 Order Day and Night In our web shop you can order more than 200 standard switches independent of time and place: 24 hours per day, 7 days per week. \

15 Switches and sensors tab overview Rocker switches Rocker Switches Pushbutton switches Toggle switches Slide switches Rotary switches Foot switches Tact and key switches Snap-action switches Micro-signal switches Sensors Sensors Micro-Signal Switches Snap-Action Switches Tact and Key switches Foot Switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches ECO Push N drive Push n drive 13 ]

16 Order Day and Night In our web shop you can order more than 200 standard switches independent of time and place: 24 hours per day, 7 days per week. \

17 Rocker switches Rocker switches Rocker switches Pushbutton switches Toggle switches Slide switches Rotary switches Foot switches Tact and key switches Snap-action switches Micro-signal switches sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ECO 15 ]

18 Rocker switches Rocker Switches Series 1900 Smallest single-pole rocker switches to 6 (2) A 250 V AC \ Page Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Appliance cut-out: 19.2 x 6.8 mm 23.2 x 6.8 mm 30.0 x 6.8 mm Series 1800 Single and double-pole rocker switches to 12 (4) A 250 V AC Appliance cut-out: 19.2 x 12.9 mm 19.2 x 21.9 mm Series 1890 Single-pole rocker switches illuminated with LED to 6 A 24 V DC Appliance cut-out: 19.2 x 12.9 mm Series 1881 Single-pole round rocker switches to 12 (4) A 250 V AC Appliance cut-out: Ø 20.3 mm Ø 21.2 mm Series 1855 Miniature double-pole rocker switches to 4 (1) A 250 V AC Appliance cut-out: 19.2 x 12.9 mm Series 1858 Miniature double-pole rocker switches to 10 (4) A 250 V AC 1E4 \ Page \ Page \ Page \ Page \ Page Appliance cut-out: 19.2 x 12.9 mm Series 1941 Single-pole rocker switches IP 50 to 12 (8) A 250 V AC 1E4 \ Page Appliance cut-out: 19.2 x 12.9 mm \ 16

19 Rocker switches Series 1550 Single-pole rocker switches to 16 (4) A 250 V AC \ Page Rocker switches Appliance cut-out: 26.2 x 12.4 mm 27.2 x 12.2 mm 28.6 x 14.0 mm Series 1830 Single and double-pole rocker switches to 20 (4) A 250 V AC Appliance cut-out: 30.0 x 11.0 mm 30.0 x 22.0 mm Series 1930 Double-pole rocker switches IP 65 to 20 (4) A 250 V AC Appliance cut-out: 30.0 x 22.0 mm Series 1656 Single-pole rocker switches to 10 A 250 V AC Appliance cut-out: 28.0 x 13.0 mm Series 3230 Single and double-pole rocker switches to 10 (5) A 12 and 24 V DC Series 3250 Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 \ Page \ Page \ Page \ Page \ Page Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Series 0344 Three-pole rocker switches to 16 (6) A 400 V AC \ Page ]

20 Series Smallest single-pole rocker switches to 6 (2) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Reliable leaf spring contact system with contact spacing 3 mm Attractive, slim design Three sizes Low space requirement due to small sizes Mechanical life endurance Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 75E3 2-5 N < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals PA PA silver plated 80 N Approval marks 7 / 1 / 4 Suitable for appliances of protection class II On request Other colors Other printing variants Cable assembly \ 18

21 Series Smallest single-pole rocker switches to 6 (2) A 250 V AC single-pole ON / OFF switch (SPST) Actuator color / printing Housing color 6 (2) A 250 V AC 1E4 4 (1) A 250 V AC 5E4 30 ma 12 V DC 5E4 6 A V AC 1/8 HP Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Terminal type Ag Ag Ag rocker marking silver Ag Ag Ag Ag Au Basic type 1901 single-pole X = Wall thickness x y z Terminal description 6.8 Contact distance (mm) Contact material Quick-connect terminal 4.8 x Miscellaneous Stock version ]

22 Series Smallest single-pole rocker switches to 6 (2) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type 1911 single-pole X = Wall thickness x y z Basic type 1921 single-pole X = Wall thickness x y z Quick-connect terminal 4.8 x Quick-connect terminal 4.8 x 0.8 \ 20

23 Series Single and double-pole rocker switches to 12 (4) A 250 V AC Rocker switches Product features 100 million times proven switching principle High, flexible design variety Excellent actuating characteristic Illuminated and non-illuminated variants Mechanical life endurance Inrush current (capacitive) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 10E4 5E4 (basic types 1808 and 1809) 50 A 70 A (contact pairing Ag / Ag, product-dependent) < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C C (product-dependent) actuating side -20 C C Flammability UL 94 V-2 UL 94 V-0 (product-dependent) Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II PA / PC PA silver plated / tinned / gold plated 80 N 7 / 1 / 4 / ß On request Other colors Other printing variants Other lamp variants Snap-on, customized actuators Cable assembly Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 21 ]

24 Rocker Switches H Series Single and double-pole rocker switches to 12 (4) A 250 V AC Lighting voltage (V) single-pole Actuator color / printing ON / OFF switch (SPST) sealing plate Ag sealing plate Ag Ag Ag Ag Ag Ag snap-on rocker Ag Ag Ag Ag Ag Ag Ag Ag \ 22 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 ma 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version

25 Lighting voltage (V) single-pole Actuator color / printing ON / OFF switch (SPST) Ag with dust cap black Ag Ag installation depth 13.2 Ag installation depth 28.1 Ag Ag Ag Ag Ag Au Normally closed contact (SPNC) Ag Ag Normally open contact (SPNO) Ag Rocker switches H Series Single and double-pole rocker switches to 12 (4) A 250 V AC Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 ma 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version 23 ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches

26 Rocker Switches H Series Single and double-pole rocker switches to 12 (4) A 250 V AC Lighting voltage (V) single-pole Actuator color / printing Normally open contact (SPNO) Ag Ag Changeover switch (SPDT) Ag Ag Ag Ag Ag Au Changeover switch with OFF position in the center (SPDT - Center OFF) Ag < Ag < Ag < Ag < momentary function one side Ag < \ 24 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 ma 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version

27 Lighting voltage (V) single-pole Actuator color / printing Changeover switch with OFF position in the center (SPDT - Center OFF) momentary function both sides Ag < PCB tinned Ag < PCB tinned momentary function both sides Ag < installation depth 29.6 Ag < Ag < Ag < momentary function one side Ag < momentary function both sides Ag < Au < momentary function both sides Au < Changeover switch (SPDT momentary) Ag Ag Au Rocker switches H Series Single and double-pole rocker switches to 12 (4) A 250 V AC Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 ma 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version 25 ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches

28 Rocker Switches H Series Single and double-pole rocker switches to 12 (4) A 250 V AC Lighting voltage (V) double-pole Actuator color / printing ON / OFF switch (DPST) installation depth 17.5 Ag installation depth 17.5 Ag installation depth 19.5 Ag installation depth 19.5 Ag installation depth 19.5 Ag Ag Ag installation depth 16.2 Ag lang shortened gate Ag angled M Ag Ag Ag Ag \ 26 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 ma 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version installation depth 20.5 ignition voltage < 100 V Ag installation depth 20.5 ignition voltage < 100 V Ag

29 Lighting voltage (V) double-pole Actuator color / printing ON / OFF switch (DPST) Ag Ag Ag M Ag Au Normally open contact (DPNO) Ag Changeover switch (DPDT) Ag Ag 3 1 mm longer Ag Ag Changeover switch with OFF position in the center (DPDT - Center OFF) Ag < momentary function one side Ag < Rocker switches H Series Single and double-pole rocker switches to 12 (4) A 250 V AC Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 ma 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version 27 ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches

30 Rocker Switches H Series Single and double-pole rocker switches to 12 (4) A 250 V AC Lighting voltage (V) double-pole Actuator color / printing Changeover switch with OFF position in the center (DPDT - Center OFF) momentary function both sides Ag < PCB tinned Ag < Changeover switch (DPDT momentary) Ag 3 1 mm longer \ 28 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 ma 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version

31 Lighting voltage (V) Combination Actuator color / printing ON / OFF switch (SPST) Ag without separating gate Ag Changeover switch with OFF position in the center (SPDT - Center OFF) life endurance cycles Ag < Rocker switches H Series Single and double-pole rocker switches to 12 (4) A 250 V AC Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 ma 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version 29 ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches

32 Series Single and double-pole rocker switches to 12 (4) A 250 V AC Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker Switches Lamp Lighting voltage (V) Actuator color / printing Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 ma 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version Lamp VDE VDE VDE size basic type 1805 VDE \ 30

33 Series Single and double-pole rocker switches to 12 (4) A 250 V AC Rocker switches Basic types 1801 single-pole illuminated / non-illuminated X = Wall thickness Quick-connect terminal 4.8 x 0.8 basic type x y z Quick-connect terminal 4.8 x 0.8 basic types 1801 and Solder terminal basic type PCB terminal basic type x Quick-connect terminal 4.8 x 0.8 basic type Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 21.6 Solder terminal basic type Solder terminal basic types 1801 and ]

34 Series Single and double-pole rocker switches to 12 (4) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic types 1802, 1804 and 1805 double-pole illuminated / non-illuminated X = Wall thickness x y z Quick-connect terminal 4.8 x 0.8 basic type 1805 Solder terminal basic type PCB terminal angled M Terminal 1 2 Quick-connect terminal 4.8 x 0.8 Terminal 1a 2a Socket terminal M Quick-connect terminal 4.8 x 0.8 basic types 1802 and Solder terminal basic types 1802 and PCB terminal basic types 1802 and \ 32

35 Series Single and double-pole rocker switches to 12 (4) A 250 V AC Rocker switches Basic type 1809 double-pole non-illuminated X = Wall thickness Quick-connect terminal 4.8 x x y z Basic type 1806 combination X = Wall thickness x y z Quick-connect terminal 4.8 x Solder terminal PCB terminal Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Quick-connect terminal 4.8 x ]

36 Series Single and double-pole rocker switches to 12 (4) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type 1807 lamp X = Wall thickness Quick-connect terminal 4.8 x x y z Basic type 1807 lamp X = Wall thickness x y z Quick-connect terminal 4.8 x 0.8 \ 34

37 Series Single and double-pole rocker switches to 12 (4) A 250 V AC Protection cap Protection cap Dummy piece Transparent PVC-protection cap for single-pole switches of basic types 1800, 1801, 1803 and Serves as dust and water protection of the actuation side. Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 11.2 Transparent PVC-protection cap for double-pole switches of basic types 1802, 1804, 1805 and Serves as dust and water protection of the actuation side. Dummy piece for size of basic type 1802, 1804, 1805, 1806, 1807 and 1809 made of PA with window and housing in black Dummy piece for size of basic type 1800, 1801, 1803, 1807, 1808, 1811, 1813, 1818, 1846, 1850 and 1858 made of PA with window and housing in black Dummy piece V0 material 35 ]

38 Series Single-pole rocker switches illuminated with LED to 6 A 24 V DC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Product features Illuminated with LED High mechanical life endurance Mechanical life endurance Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 75E3 3 N < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals Suitable for appliances of protection class II UL 94 (actuator: V-2, housing: V-0) PA PA silver plated 80 N On request Other colors Printing Other terminal types Variant for mains application \ 36

39 Series Single-pole rocker switches illuminated with LED to 6 A 24 V DC single-pole ON / OFF switch (SPST) Lighting voltage (V) Actuator color / printing Housing color 6 A 24 V DC Terminal type Terminal description Contact distance (mm) Contact material Ag Basic type 1890 Quick-connect terminal 4.8 x 0.8 X = Wall thickness x y z Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Miscellaneous Transparent PVC-protection cap. Serves as dust and water protection of the actuation side. Stock version Protection cap ]

40 Series Single-pole round rocker switches to 12 (4) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Attractive round rocker switch High mechanical rating with at least switching cycles Variants with IP 51 Low depth with 18.7 mm Appliance cut-out with 20 mm Mechanical life endurance Operating force Inrush current (capacitive) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type 10E4 3 N 70 A < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 and IP 51 (product-dependent) Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 UL 94 V-0 (product-dependent) Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals PA PA silver plated 80 N Approval marks 7 / 1 / 2 / 5 Suitable for appliances of protection class II On request Other colors Other printing variants Other terminal variants (e.g. PCB) Cable assembly Gold-plated contacts for low voltages Other switching functions (e.g middle off) Painted variants \ 38

41 Series Single-pole round rocker switches to 12 (4) A 250 V AC single-pole ON / OFF switch (SPST) Actuator color / printing Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP Ag IP Ag IP Ag IP Ag IP Ag IP 51 with swtiching system cover Ag IP Ag IP mm longer Ag IP 51 with swtiching system cover Normally open contact (SPNO) Ag IP 51 Changeover switch (SPDT) Ag IP Ag IP A 125 V AC 1/3 HP Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Terminal type Terminal description Contact distance (mm) Contact material Actuator EN cap. 30 conform G Miscellaneous with swtiching system cover opening terminal 1b closed Stock version 39 ]

42 Series Single-pole round rocker switches to 12 (4) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type 1881 X = Wall thickness x Ø Basic type 1883 X = Wall thickness x Ø Quick-connect terminal 1 mm longer 4.8 x ø ø ø 19.8 ø plug-in DIN A Flachstecker Quick-connect terminal 4.8 x DIN A ø Quick-connect terminal 4.8 x \ 40

43 Series Single-pole round rocker switches to 12 (4) A 250 V AC Transparent PVC - protection cap. Serves as dust and water protection of the actuation side. Rocker switches Ø 24.5 Protection cap Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Further information under 41 ]

44 Series Miniature double-pole rocker switches to 4 (1) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Illuminated rocker switches Different lamp variants Powerful with mechanical switching cycles Caulked terminals for reliable plugging of the receptacles Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 5E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals PA PA silver plated 80 N Approval marks 7 / 1 / 4 Suitable for appliances of protection class II On request Other colors Other printing variants Other terminal types Other lamp variants Cable assembly \ 42

45 Series Miniature double-pole rocker switches to 4 (1) A 250 V AC double-pole ON / OFF switch (DPST) Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Lighting voltage (V) Actuator color / printing Housing color 4 (1) A 250 V AC 1E4 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Stock version Ag Ag Ag Ag Ag Ag Ag Ag Ag 43 ]

46 Series Miniature double-pole rocker switches to 4 (1) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type 1855 X = Wall thickness x y z Protection cap Quick-connect terminal 4.8 x Solder terminal Transparent PVC-protection cap. Serves as dust and water protection for the actuating side. 0.8 \ 44

47 Series Miniature double-pole rocker switches to 10 (4) A 250 V AC 1E4 Rocker switches Product features Non-illuminated rocker switch Powerful with inrush currents (capacitive) up to 100 A Immediately self-extinguishing due to UL 94 V-0 material Conformant acc. to EN par Mechanical life endurance Operating force Inrush current (capacitive) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 10E4 5 N 100 A < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-0 UL 94 V-2 (in the versions in white) Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals PA PA silver plated 80 N On request Other colors Other printing variants Single-pole assembled Cable assembly Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Approval marks 7 / 1 / 4 Suitable for appliances of protection class II 45 ]

48 Series Miniature double-pole rocker switches to 10 (4) A 250 V AC 1E4 Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches double-pole ON / OFF switch (DPST) Actuator color / printing Housing color 10 (4) A 250 V AC 1E4 6 (4) A 250 V AC 5E4 12 A 250 V AC 1/2 HP 12 A 125 V AC 1/3 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version Ag Ag Ag Ag Ag Ag terminal spacing Ag Ag Ag Ag Ag single-pole occupied \ 46

49 Series Miniature double-pole rocker switches to 10 (4) A 250 V AC 1E Rocker switches Basic type 1858 double-pole X = Wall thickness Quick-connect terminal 4.8 x x y z Protection cap PCB terminal PCB terminal angled to terminal side Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Solder terminal PCB terminal angled to terminal side Transparent PVC-protection cap. Serves as dust and water protection of the actuation side ]

50 Series Single-pole rocker switches IP 50 to 12 (8) A 250 V AC 1E4 Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Single-pole rocker switch High dust protection with IP million times proven switching principle Appliance cut-out same as basic type 1801 Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 1E5 5E4 (normally open contact) < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing Plug force of the terminals Suitable for appliances of protection class II terminal side -20 C C C (product-dependent) actuating side -20 C C PA PA / PA glass fiber-reinforced 80 N On request Other colors Other printing variants Other terminal variants PVC - protection cap With approval mark \ 48

51 Series Single-pole rocker switches IP 50 to 12 (8) A 250 V AC 1E4 single-pole ON / OFF switch (SPST) Actuator color / printing 12 (8) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 5E4 Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Terminal type Ag 50 without approval mark Ag 50 O at On-position Normally open contact (SPNO) START STOP Terminal description Contact distance (mm) Contact material Inrush current (capacitive) (A) Ag Ag O at On-position Basic type 1941 single-pole X = Wall thickness x y z Housing with internal meander and a hole underneath the snap-on mechanism for IP 50. Switching system is dust- and waterproof Quick-connect terminal 4.8 x 0.8 Miscellaneous Stock version Sectional drawing 49 ]

52 Series Single and double-pole rocker switches to 16 (4) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Product features Inrush currents (capacitive) up to 100 A Two housing variants (with flange or lower lying) With mechanical forced opening Illuminated window with lens effect Mechanical life endurance Inrush current (capacitive) Contact distance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 5E4 100 A 3 mm < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 UL 94 V-0 (product-dependent) Glow wire test temperature 850 C Material actuator housing Plug force of the terminals PA PA 80 N On request Other colors Other rocker labelings Other lamp variants Conformity IEC chap Special rockers Cable assembly Approval marks 7 / 1 / 4 / 5 Suitable for appliances of protection class II \ 50

53 Series Single and double-pole rocker switches to 16 (4) A 250 V AC single-pole ON / OFF switch (SPST) Lighting voltage (V) Actuator color / printing Housing color 7 A 250 V AC 5E4 16 (4) A 250 V AC 5E4 16 (4) A 250 V AC 1E Ag 10 (4) A 250 V AC 5E4 10 (4) A 250 V AC 25E Ag lower lying flange 10 A 12 V DC Ag Ag Ag Au Normally closed contact (SPNC) Ag Ag Normally open contact (SPNO) 20 ma 250 V AC 5E4 20 A 250 V AC 2 HP 20 A 125 V AC 1 HP Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 16 A 250 V AC 2 HP 16 A 125 V AC 1 HP Terminal type Terminal description Contact material EN cap. 30 conform G Miscellaneous approvals KEMA lower lying flange increased life endurance at a high electrical rating Ag Ag lower lying flange Stock version 51 ]

54 Series Single and double-pole rocker switches to 16 (4) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches double-pole ON / OFF switch (DPST) Lighting voltage (V) Actuator color / printing Housing color 7 A 250 V AC 5E4 16 (4) A 250 V AC 5E4 16 (4) A 250 V AC 1E4 10 (4) A 250 V AC 5E4 10 (4) A 250 V AC 25E3 10 A 12 V DC Ag Ag Ag Ag lower lying flange Ag lower lying flange Ag Ag Ag Ag Ag 20 ma 250 V AC 5E4 20 A 250 V AC 2 HP 20 A 125 V AC 1 HP 16 A 250 V AC 2 HP 16 A 125 V AC 1 HP Terminal type Terminal description Contact material EN cap. 30 conform G Miscellaneous flange dimension 31.5 x 17 mm Ag Ag lower lying flange Ag lower lying flange Ag Ag Ag Ag conformant with EN par Ag lower lying flange Ag lower lying flange Ag 2 PCB holders lower lying flange Ag lower lying flange Stock version \ 52

55 Series Single and double-pole rocker switches to 16 (4) A 250 V AC Rocker switches Basic types 1550 and 1555 single and double-pole X = Wall thickness Quick-connect terminal 6.3 x Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches x y z double-pole X = Wall thickness x y z Quick-connect terminal 6.3 x 0.8 cover frame 31.5 x 17 mm 53 ]

56 Series Single and double-pole rocker switches to 16 (4) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic types 1550 and 1555 lower lying flange single and double-pole X = Wall thickness Quick-connect terminal 6.3 x x y z Basic type 1551 and 1552 single and double-pole X = Wall thickness x y z Quick-connect terminal 6.3 x Solder terminal Solder terminal \ 54

57 Series Single and double-pole rocker switches to 16 (4) A 250 V AC Rocker switches Basic types 1551 and 1552 lower lying flange single and double-pole X = Wall thickness x y z Dummy piece Quick-connect terminal 6.3 x PCB terminal angled x Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches PCB terminal x PCB terminal angled mirror-inverted Dummy piece for series 1550 made of PA 55 ]

58 Series Single and double-pole rocker switches to 20 (4) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Large variety Variants with IP 67 or dust protection insert Two housing variants Actuating characteristic Illuminated and non-illuminated variants Approval for 400 V (product-dependent) Mechanical life endurance 10E4 5E4 (basic type 1839) 1E6 (product-dependent) Inrush current (capacitive) 120 A / 50 A (contact pair Ag / Cu and basic type 1834) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 / IP 67 (product-dependent) Flammability UL 94 V-2 UL 94 V-0 (product-dependent) Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II terminal side -20 C C / C / C (product-dependent) actuating side -20 C C PA / PC (product-dependent) PA silver plated / tinned (product-dependent) 80 N 7 / 1 / 4 / ß On request Other colors Other rocker printings Other lamp variants Snap-on customized actuators Cable assembly \ 56

59 Lighting voltage (V) single-pole Actuator color / printing ON / OFF switch (SPST) Ag Ag Ag Ag Ag Ag housing with 2 separating gates Ag housing with 2 separating gates Ag Ag lower lying flange Ag Ag Ag H Series Single and double-pole rocker switches to 20 (4) A 250 V AC Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 ma 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version 1E6 mechanical life endurance IP 67 1E6 mechanical life endurance IP 67 Ag Ag ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches Rocker switches

60 Rocker Switches H Series Single and double-pole rocker switches to 20 (4) A 250 V AC Lighting voltage (V) single-pole Actuator color / printing Normally open switch (SPNO) Ag Ag lower lying flange Ag Au Changeover switch (SPDT) Ag Ag Ag Changeover switch with OFF position in the center (SPDT - Center OFF) momentary function both sides Ag momentary function both sides Ag Ag Ag momentary function one side Ag \ 58 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 ma 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version 1E6 mechanical life endurance IP 67 Ag

61 Lighting voltage (V) single-pole Actuator color / printing Changeover switch with OFF position in the center (SPDT - Center OFF) momentary function one side Ag momentary function both sides Ag Ag Changeover switch (SPDT momentary) Ag Ag Rocker switches H Series Single and double-pole rocker switches to 20 (4) A 250 V AC Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 ma 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version momentary function both sides lower lying flange Ag external lamp connection two-pole size Ag ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches

62 Rocker Switches H Series Single and double-pole rocker switches to 20 (4) A 250 V AC Lighting voltage (V) double-pole Actuator color / printing ON / OFF switch (DPST) cover frame 33.2 long Ag Ag Ag Ag Ag Ag Ag Ag Ag cover frame 33.2 long Ag Ag Ag Ag \ 60 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 ma 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version PCB holder mounted lower lying flange Ag Ag 3 6.3

63 Lighting voltage (V) double-pole Actuator color / printing ON / OFF switch (DPST) cover frame 33.2 long Ag lower lying flange Ag lower lying flange Ag lower lying flange Ag lower lying flange Ag dust protection inlay Ag Ag Ag lower lying flange Ag Normally open contact (DPNO) Ag Changeover switch (DPDT) Ag Ag Ag Rocker switches H Series Single and double-pole rocker switches to 20 (4) A 250 V AC Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 ma 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version 61 ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches

64 Rocker Switches H Series Single and double-pole rocker switches to 20 (4) A 250 V AC Lighting voltage (V) double-pole Actuator color / printing Changeover switch (DPDT) Ag Ag Ag cover frame 33.2 long Ag lower lying flange Ag Changeover switch with OFF position in the center (DPDT - Center OFF) Ag momentary function both sides Ag momentary function both sides Ag Ag Ag Ag dust protection inlay Ag momentary function one side Ag \ 62 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 ma 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version dust protection inlay momentary function both sides Ag

65 Lighting voltage (V) double-pole Actuator color / printing Changeover switch with OFF position in the center (DPDT - Center OFF) momentary function both sides Ag Ag Ag momentary function one side Ag dust protection inlay Ag Changeover switch (DPDT momentary) Ag H Series Single and double-pole rocker switches to 20 (4) A 250 V AC Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 ma 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version dust protection inlay momentary function one side lower lying flange cover frame 33.2 long momentary function both sides Ag Au ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches Rocker switches

66 Series Single and double-pole rocker switches to 20 (4) A 250 V AC Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker Switches Lamp Lighting voltage (V) Actuator color / printing Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 ma 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Lamp size basic type size basic type Stock version \ 64

67 Series Single and double-pole rocker switches to 20 (4) A 250 V AC Rocker switches Basic types 1830, 1831, 1833 and 1838 single-pole illuminated / non-illuminated X = Wall thickness Quick-connect terminal 2.8 x x y z Quick-connect terminal 4.8 x 0.8 basic types 1830, 1831 and Quick-connect terminal 6.3 x Quick-connect terminal 6.3 x 0.8 basic types 1831 and Quick-connect terminal 4.8 x 0.8 basic type Quick-connect terminal 6.3 x Quick-connect terminal 6.3 x 0.8 basic type Solder terminal basic type Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Solder terminal basic types 1830 and ]

68 Series Single and double-pole rocker switches to 20 (4) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic types 1832, 1834, 1835 and 1839 double-pole illuminated / non-illuminated X = Wall thickness Quick-connect terminal 4.8 x x y z Basic types 1830, 1831 and 1833 single-pole, lower lying flange illuminated / non-illuminated Quick-connect terminal 6.3 x 0.8 basic type Solder terminal basic type Quick-connect terminal 4.8 x 0.8 basic types 1830, 1831 and Quick-connect terminal 6.3 x 0.8 / 4.8 basic types 1832, 1834 and 1835 Solder terminal basic type PCB terminal basic type X = Wall thickness x y z \ 66

69 Series Single and double-pole rocker switches to 20 (4) A 250 V AC Basic types 1832, 1834, 1835 and 1839 double-pole, lower lying flange illuminated / non-illuminated X = Wall thickness x y z Quick-connect terminal 4.8 x 0.8 basic types 1832 and PCB terminal angled basic types 1832 and x x PCB terminal basic types 1832 and Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Quick-connect terminal 6.3 x 0.8 basic type x PCB terminal basic type ø ]

70 Series Single and double-pole rocker switches to 20 (4) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type 1837 lamp single and double-pole X = Wall thickness Quick-connect terminal 4.8 x 0.8 single-pole size x y z Protection cap Quick-connect terminal 6.3 x 0.8 double-pole size Quick-connect terminal 6.3 x 0.8 single-pole size PCB terminal lower lying flange Transparent PVC-protection cap for single-pole switches of basic types 1830, 1831, 1833 and Serves as dust and water protection of the actuation side Transparent PVC-protection cap for double-pole switches of basic types 1832, 1834, 1835 and 1839 with frame length 33.2 mm. Serves as dust and water protection of the actuation side Protection cap \ 68

71 Series Single and double-pole rocker switches to 20 (4) A 250 V AC Protection cap Dummy cap Dummy cap Housing Housing Transparent PVC-protection cap with burling. Serves as dust and water protection of the actuation side for double-pole basic types 1832, 1834, 1835 and 1839 with standard flange length 30 mm. Housing and dummy cap for double-pole size of basic types 1830, 1831, 1833, 1837 and 1838 made of PA black. Housing and dummy cap must be assembled by the customer and make only sense in combination Housing and dummy cap for double-pole size of basic types 1832, 1834, 1835 and 1839 made of PA black. Housing and dummy cap must be assembled by the customer and make only sense in combination Block connector for cable connection for the double-pole versions of the rocker switch series 1830 und Used with the standard timer plug AMP Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Block connector ]

72 Series Double-pole rocker switches IP 65 to 20 (4) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Illuminated and non-illuminated variants with various switching functions IP 65 with integrated gasket for high dust and water protection Inrush current (capacitive) up to 120 A Approval for 400 V 100 million times proven switching principle Modern rocker design High, flexible variety Mechanical life endurance Operating force Inrush current (capacitive) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type 5E4 3-8 N 120 A 100 A (basic type 1939) 50 A (basic type 1934) < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 (terminal side), IP 65 (actuating side) Ambient temperature terminal side -30 C C actuating side -30 C C Flammability UL 94 V-2 UL 94 V-0 (housing and socket only) Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals PC / TPU (bellows) PA silver plated 80 N Approval marks 7 / 1 / 5 Suitable for appliances of protection class II On request Other switching functions (e.g. Changeover switch) Other terminal types Other colors Other printing variants Other lamp variants Cable assembly \ 70

73 Lighting voltage (V) double-pole Actuator color / printing ON / OFF switch (DPST) Ag Ag Ag Ag Ag Ag bellows anthracite Ag Ag Ag Ag Ag Ag Ag Ag H series Double-pole rocker switches IP 65 to 20 (4) A 250 V AC Housing color 20 (4) A 250 V AC 1E4 12 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 16 A 250 V AC 1 HP 16 A 125 V AC 3/4 HP 16 A 125 V AC 1/3 HP 14 A 250 V AC 3/4 HP 14 A 250 V AC 1/2 HP 14 A 125 V AC 1/3 HP 14 A 125 V AC 1/4 HP 12 A 250 V AC 1 HP 12 A 125 V AC 1/2 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version Ag ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches Rocker switches

74 Rocker Switches H series Double-pole rocker switches IP 65 to 20 (4) A 250 V AC Lighting voltage (V) double-pole Actuator color / printing ON / OFF switch (DPST) Ag Ag Ag Ag bellows white Ag Ag bellows red Ag Ag single-pole occupied Ag Normally closed contact (DPNC) Ag Ag Normally open contact (DPNO) Ag Ag \ 72 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Housing color 20 (4) A 250 V AC 1E4 12 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 16 A 250 V AC 1 HP 16 A 125 V AC 3/4 HP 16 A 125 V AC 1/3 HP 14 A 250 V AC 3/4 HP 14 A 250 V AC 1/2 HP 14 A 125 V AC 1/3 HP 14 A 125 V AC 1/4 HP 12 A 250 V AC 1 HP 12 A 125 V AC 1/2 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version

75 Lighting voltage (V) double-pole Actuator color / printing Changeover switch (DPDT) Ag Ag Ag Changeover switch with OFF position in the center (DPDT - Center OFF) Ag Ag momentary function both sides Ag < momentary function both sides Ag < momentary function both sides Ag < H series Double-pole rocker switches IP 65 to 20 (4) A 250 V AC Housing color 20 (4) A 250 V AC 1E4 12 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 16 A 250 V AC 1 HP 16 A 125 V AC 3/4 HP 16 A 125 V AC 1/3 HP 14 A 250 V AC 3/4 HP 14 A 250 V AC 1/2 HP 14 A 125 V AC 1/3 HP 14 A 125 V AC 1/4 HP 12 A 250 V AC 1 HP 12 A 125 V AC 1/2 HP Terminal type Terminal description Contact distance (mm) Contact material EN cap. 30 conform G Miscellaneous Stock version single-pole occupied momentary function both sides Au < ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches Rocker switches

76 Series Double-pole rocker switches IP 65 to 20 (4) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic types 1932, 1934, 1935 and 1939 double-pole X = Wall thickness x y z Sunken installation recommended for IP R3.7 Quick-connect terminal 4.8 x 0.8 basic type Quick-connect terminal 6.3 x 0.8 basic types 1932, 1934 and R x ø PCB terminal basic type Quick-connect terminal 6.3 x 0.8 basic type Solder terminal basic type 1939 A correct assembly and examination on tightness according to IP 65 in the equipment must be ensured by the customer Block connector for cable connection for the double-pole versions of the rocker switch series 1830 und Used with the standard timer plug AMP Block connector \ 74

77 Series Single-pole rocker switches to 10 A 250 V AC Rocker switches Product features Powerful, illuminated rocker switch with plate spring switching system Silk matt printable surface Can be mounted from rear (alternatively with frame) Switching system sealed from rocker to protect against overflowing water (VDE 700 part 15) Snap fastening for wall thicknesses > 2 mm Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 2E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals PA PA Cu and CuZn bare (bearing terminal silver plated) 80 N Approval marks 1 / 4 / 7 Suitable for appliances of protection class II On request Other actuator forms (e.g. oval) As a double switch Other colors Other printing variants Other terminal types Other lamp variants Variant without illumination Cable assembly Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 75 ]

78 Series Single-pole rocker switches to 10 A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches single-pole ON / OFF switch (SPST) Lighting voltage (V) Actuator color / printing 10 A 250 V AC 1E4 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Ag Ag glow lamp with ignition voltage < 90 V Basic type 1656 Quick-connect terminal 4.8 x 0.8 X = Wall thickness x y z > Mounting frame made of polyamide 18 Mounting frame black anthracite metallic \ 76

79 Series Single and double-pole rocker switches to 10 (5) A 12 and 24 V DC Rocker switches Product features Attractive rocker switch (rocker separate) Million times proven, friction snap-action contact system Powerful with switching cycles electrically and mechanically for DC voltage applications Indicator lamp identical Dust and water protected High variety With or without function illumination (LED) Installation from the front directly or with assembly frame Block connector support Mechanical life endurance 10E4 Ambient temperature -40 C C Material Miscellaneous actuator housing terminals PA glass fiber-reinforced PA silver plated On request Other colors Other rocker symbols (laser etched) Other switching functions Other lamp variants With assembled rocker illumination with mounted rocker: day design = light gray / night design = pea green Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 77 ]

80 Series Single and double-pole rocker switches to 10 (5) A 12 and 24 V DC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches single-pole (rocker separate) Lighting voltage (V) Housing color Normally open contact latching 1-step (SPST) x x x x (5) A 24 V DC 1E5 Normally open contact momentary 1-step (SPNO) x x 0.8 double-pole (rocker separate) Lighting voltage (V) Housing color Changeover switch latching 1-step (DPDT) x (5) A 24 V DC 1E5 10 (5) A 12 V DC 1E5 10 (5) A 12 V DC 1E5 Terminal type Terminal type Terminal description Terminal description Miscellaneous with search lighting LED green circuit symbol: 3.01 with function indicator LED red with search lighting LED green circuit symbol: 3.03 with search lighting LED green circuit symbol: 3.01 with function indicator LED red with search lighting LED green circuit symbol: 3.03 with search lighting LED green circuit symbol: 3.02 with search lighting LED green circuit symbol: 3.02 Miscellaneous with search lighting LED green circuit symbol: 3.09 Stock version Stock version \ 78

81 Series Single and double-pole rocker switches to 10 (5) A 12 and 24 V DC Combination (rocker separate) Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Lighting voltage (V) Housing color Changeover switch latching 2-step (SPDT) x x x x (5) A 24 V DC 1E5 Changeover switch momentary 2-step (SPDT momentary) x x 0.8 Lamp (rocker separate) Lamp Lighting voltage (V) Housing color 10 (5) A 24 V DC 1E5 10 (5) A 12 V DC 1E5 10 (5) A 12 V DC 1E5 Terminal type Terminal type Terminal description Terminal description Miscellaneous 2 x single-pole changeover switch with search lighting LED green circuit symbol: x single-pole changeover switch with function indicator LED red with search lighting LED green circuit symbol: x single-pole changeover switch with search lighting LED green circuit symbol: x single-pole changeover switch with function indicator LED red with search lighting LED green circuit symbol: x single-pole changeover switch with search lighting LED green circuit symbol: x single-pole changeover switch with search lighting LED green circuit symbol: x 0.8 LED red / red x 0.8 LED red / green x 0.8 LED green / green x 0.8 LED yellow / green Miscellaneous Stock version Stock version 79 ]

82 Series Single and double-pole rocker switches to 10 (5) A 12 and 24 V DC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic types 3230 and Quick-connect terminal 3.0 x Rocker without stop (switching function both sides) with stop (switching function one side) Cap with stop both sides (for lamp 3237) Installation frame to ø3 4.8 SL RC FI Snap-on rocker for basic type 3230 and cap for basic type 3237 (without switching function) painted black with or without stop for both or one-sided switching function. Laser etched by customer or on request. Note: Rocker must be ordered separately in addition to the basic switch. Assembly on customer side. Installation frame for basic types 3230 and 3237 in black Dummy piece for the basic types 3230 and 3237 with mounted black cap Dummy piece \ 80

83 Series Single and double-pole rocker switches to 10 (5) A 12 and 24 V DC Rocker switches Lasered rocker symbols (further symboles on request) Block connector Female connector Tyco block connector for cable connection for basic switch Black, Tyco no AK connector (AK ) on request. Tyco JPT (Junior Power Timer) female connectors for terminals of 3230 series. Tyco No Tyco MCP (Mutliple Contact Point) on request. Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Further information under 81 ]

84 Series Single and double-pole rocker switches to 10 (5) A 12 and 24 V DC Rocker Switches O I 3 1 O I 3 1 Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Circuit symbols Circuit symbol: 3.01 O I Circuit symbol: 3.03 II O I Circuit symbol: 3.31 II 0 I FA Circuit symbol: FA 10 Circuit symbol: 3.02 Circuit symbol: O I II O I Circuit symbol: 3.32 \ 82

85 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features High dust and water protection with IP 66 and IP 68 Unique and millions of times proven snap-action switching system Self cleaning due to relative movement Up to 4 integrated LEDs for background and function illumination Mechanical life cycles Wide range up to 20 A at 12 / 24 VDC Large variety of all required switching and circuit options Attractive design with various cap shapes and colors Large selection of laser etched symbols and acessories Individually configurable on Mechanical life endurance Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Actuator 50E4 7 N to 12 N +1,5 N < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 66 and IP 68 actuator side Ambient temperature terminal side -40 C C actuating side -40 C C Material Terminal type Lighting type actuator housing terminals Lighting voltage PA glass fiber-reinforced / PC PA / PP silver plated Quick-connect terminal On request Further cap symbols (laser etched) Further switching functions Further illumination variants Further cap colors Customer specific cap style Symbol position green; red function illumination red; yellow external function illumination red; yellow 24 V 12 V 83 ]

86 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches single-pole ON / OFF switch (SPST) Lighting voltage (V) Housing color 20 (10) A 24 V DC 1E5 20 (10) A 12 V DC 1E5 10 (5) A 24 V DC 1E5 10 (5) A V DC 1E x A x A x A x A (5) A 12 V DC 1E x A A0-bl x A A0-re x A x A < 100 ma 24 V DC 5E5 < 100 ma 12 V DC 5E5 Terminal type Terminal description Product code Miscellaneous with search lighting LED green circuit symbol: with search lighting LED red circuit symbol: with search lighting LED green circuit symbol: with function indicator LED red with search lighting LED green circuit symbol: with function indicator LED red with search lighting LED green with pre assembled cap circuit symbol: with search lighting LED green with pre assembled cap circuit symbol: with search lighting LED green circuit symbol: with search lighting LED red circuit symbol: x A circuit symbol: Normally open contact (SPNO) x B x B x B x B with search lighting LED green circuit symbol: with search lighting LED red circuit symbol: with search lighting LED green circuit symbol: with search lighting LED red circuit symbol: x B circuit symbol: Changeover switch (SPDT) x E x E x E x E with function indicator LED red with search lighting LED green circuit symbol: with function indicator LED yellow with search lighting LED red circuit symbol: with function indicator LED red with search lighting LED green circuit symbol: with function indicator LED yellow with search lighting LED red circuit symbol: x E circuit symbol: Stock version Changeover switch (SPDT momentary) x F with search lighting LED green circuit symbol: x F with function indicator LED red with search lighting LED green circuit symbol: x F with search lighting LED green circuit symbol: x F with function indicator LED red with search lighting LED green circuit symbol: \ 84

87 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 double-pole ON / OFF switch (DPST) Lighting voltage (V) Housing color 20 (10) A 24 V DC 1E5 Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 20 (10) A 12 V DC 1E5 10 (5) A 24 V DC 1E5 10 (5) A V DC 1E x A (5) A 12 V DC 1E5 < 100 ma 24 V DC 5E5 < 100 ma 12 V DC 5E5 Terminal type Terminal description Product code Miscellaneous with function indicator LED red with search lighting LED green circuit symbol: x A circuit symbol: Changeover switch (DPDT) x E x E x E x E x E B0-bl with function indicator LED red with search lighting LED green circuit symbol: with function indicator LED yellow with search lighting LED red circuit symbol: with function indicator LED red with search lighting LED green circuit symbol: with function indicator LED yellow with search lighting LED red circuit symbol: with function indicator LED yellow with search lighting LED red with pre assembled cap circuit symbol: x E circuit symbol: Changeover switch (DPDT momentary) x F x F x F x F with search lighting LED green circuit symbol: with function indicator LED red with search lighting LED green circuit symbol: with search lighting LED green circuit symbol: with function indicator LED red with search lighting LED green circuit symbol: Stock version 85 ]

88 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Combination Lighting voltage (V) Housing color 3-step OFF-ON-ON switch (2xSPST) 20 (10) A 24 V DC 1E5 20 (10) A 12 V DC 1E5 10 (5) A 24 V DC 1E5 10 (5) A V DC 1E5 10 (5) A 12 V DC 1E5 < 100 ma 24 V DC 5E5 < 100 ma 12 V DC 5E x A circuit symbol: Changeover switch with OFF-position in the center (2xSPST - Center OFF) x A x B x B x A x B x B B0-bl x B Terminal type Terminal description Product code Miscellaneous with function indicator LED red with search lighting LED green circuit symbol: with search lighting LED green circuit symbol: momentary function both sides with function indicator LED yellow with search lighting LED red circuit symbol: momentary function both sides with function indicator LED red with search lighting LED green circuit symbol: mit Suchbeleuchtung LED grün Schaltzeichen: Tastfunktion beidseitig mit Suchbeleuchtung LED grün Schaltzeichen: Tastfunktion beidseitig mit Funktionsanzeige LED gelb mit Suchbeleuchtung LED rot Schaltzeichen: Tastfunktion beidseitig x A Schaltzeichen: x B step changeover switch (2xSPDT) x A x B x C x B x B x A x B x C x B Schaltzeichen: Tastfunktion beidseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grün Schaltzeichen: mit Suchbeleuchtung LED grün Schaltzeichen: Tastfunktion beidseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grün Schaltzeichen: Tastfunktion einseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grün Schaltzeichen: Tastfunktion beidseitig mit Funktionsanzeige LED gelb mit Suchbeleuchtung LED rot Schaltzeichen: Tastfunktion beidseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grün Schaltzeichen: mit Suchbeleuchtung LED grün Schaltzeichen: Tastfunktion beidseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grün Schaltzeichen: Tastfunktion einseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grün Schaltzeichen: Tastfunktion beidseitig Stock version x B x B B0-bl mit Funktionsanzeige LED gelb mit Suchbeleuchtung LED rot Schaltzeichen: Tastfunktion beidseitig x A-00-K1-0 Schaltzeichen: \ 86

89 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E Rocker switches Series 3250 Series 3250 Cap design 1 black no light guide light guide light guide red kein light guide light guide light guide Quick-connect terminal 3.0 x Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Quick-connect terminal 3.0 x 0.8 lock bl.; no light g bl.; 1 light g red; no light g red.; 1 light g. lock bl.; no light g bl.; 1 light g red.; no light g red.; 1 light g Quick-connect terminal 3.0 x 0.8 Snap-on cap for basic type Painted black or red. With or without light guide for function illumination. Laser etched by customer or on request. Versions with locking function: - lock 1 in neutral position - lock 2 in actuated position - lock 3 in both positions Note: Rocker must be ordered separately in addition to the basic switch. Assembly on request or on customer side. lock bl.; no light g bl.; 1 light g red.; no light g red.; 1 light g. 87 ]

90 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Cap design 2 black no light guide light guide light guide red kein light guide light guide light guide Assembly frame Can be stringed together; black (end piece) (center piece) lock bl.; no light g bl.; 1 light g red; no light g red.; 1 light g. lock bl.; no light g bl.; 1 light g red.; no light g red.; 1 light g Snap-on cap for basic type Painted black or red. With or without light guide for function illumination. Laser etched by customer or on request. Versions with locking function: - lock 1 in neutral position - lock 2 in actuated position - lock 3 in both positions Note: Rocker must be ordered separately in addition to the basic switch. Assembly on request or on customer side. lock bl.; no light g bl.; 1 light g red.; no light g red.; 1 light g \ 88

91 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 Adapter frame for basic type 3250 in black. For cut-out 44 mm x 22 mm. Rocker switches Adapter frame Panel seal Seal for adapter frame Hole plug Panel seal for base switch 3250 / adapter frame Dustand water protection IP 67 from actuation side (correct customer assembly mandatory). Assembly on customers side or on demand. Thickness 1.5 mm; black. Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Hole plug for basic type With support for block connector. Pilot light 3257 in the same design as basic type 3250 without switching function. With 2 LEDs. Different colors available on demand. Each LED individually controllable. Laser inscription by customer or on request. Pilot light ]

92 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 Rocker Switches Tyco block connector for cable connection for basic switch Black, Tyco no AK connector (AK ) on request. Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Block connector Female connector Lasered rocker symbols (examples) more on request Tyco JPT (Junior Power Timer) female connectors for terminals of 3250 series. Tyco No Tyco MCP (Mutliple Contact Point) on request \ 90

93 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 0 I I 3 1 Rocker switches Circuit symbols I I I 7 4 FA FA I I I 7 7 FA FA 9 1 FA Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 0 I I ]

94 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 Rocker Switches 0 I 3 0 I 5 3 Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Circuit symbols (continue from page 91) II 0 I II 0 I I FA II 0 I II 0 I I FA II 0 I 3 8 II 0 I \ 92

95 Series Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5 II 0 I II 0 I Rocker switches Circuit symbols (continue from page 92) II 0 I FA II FA II 0 I /8 FA Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 93 ]

96 Series Three-pole rocker switches to 16 (6) A 400 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Product features Robust and powerful rocker switch Dust protected Approval for 400 V Material actuator housing terminals Prüfzeichen 7 three-pole ON / OFF switch (TPST) Actuator color / printing Housing color M4 3 Ag M4 3 Ag Basic type (6) A 400 V AC 5E4 25 A 400 V AC ±1 On request Other terminal variants PA Duroplast / Duroplast (base) / chromated galvanized steel (bracket plate) chromatiert 6 Terminal type Terminal description Contact distance (mm) 9 Screw terminal M4 Contact material Miscellaneous Stock version \ 94

97 Pushbutton switches Rocker switches Rocker switches Pushbutton switches Pushbutton switches Toggle switches Slide switches Rotary switches Foot switches Tact and key switches Snap-action switches Micro-signal switches sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches ECO 95 ]

98 Pushbutton switches Rocker Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Series 1680 Single and double-pole pushbutton switches to 16 (4) A / 12 (12) A 250 V AC Series 1683 Single and double-pole pushbutton switches to 16 A 250 V AC Appliance cut-out: Series 1691 Smallest single-pole pushbutton switches for low voltages 19.2 x 12.9 mm Series 1247 Double-pole pushbutton switches to 7 (7) A 250 V AC Series 5000 Round pushbutton switches for at least mechanical switching cycles Appliance cut-out: Ø 16.0 mm Series 1846 Single-pole pushbutton switches to 2 (1) A 250 V AC Appliance cut-out: 19.2 x 12.9 mm \ Page \ Page \ Page 109 \ Page \ Page \ Page Series 1840 Single and double-pole pushbutton switches to 6 (4) A 250 V AC Appliance cut-out: Ø 12.0 mm \ Page \ 96

99 Pushbutton switches Series 1660 Single and double-pole pushbutton switches to 16 (4) A 250 V AC \ Page Rocker switches Appliance cut-out: 30.0 x 22.2 mm Series 1670 Single and double-pole pushbutton switches to 16 (4) A 250 V AC Appliance cut-out: Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches 30.0 x 22.2 mm \ Page Pushbutton switches 97 ]

100 Series Single and double-pole pushbutton switches to 16 (4) A / 12 (12) A 250 V AC Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Rocker Switches Product features Million times proven double lifting contact system with at least mechanical switching cycles High electrical rating up to 16 A High mechanical load capacity up to 750 N (for foot actuation) Great variety Variable housing and pushbutton form with holders With pole separating wall (basic type 1689) Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 10E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature Flammability Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II terminal side -20 C C C C (product-dependent) actuating side -20 C C UL 94 (actuator: V-0, socket: V-1, housing: V-2) UL 94 V-0 (product-dependent) PBTP / PA / PA (product-dependent) PA / PA glass fiber-reinforced / PA C3U / PA Latamid glass fiber-reinforced (product-dependent) silver plated / tinned / copper bare (product-dependent) 80 N On request Special plastics Other terminal variants Customized actuators and housing contours Cable assembly Behind PCB mountable variants 7 / 1 / 2 / 4 (product-dependent) \ 98

101 Series Single and double-pole pushbutton switches to 16 (4) A / 12 (12) A 250 V AC single-pole ON / OFF switch (SPST) 8 (8) A 250 V AC 1E4 16 (4) A 250 V AC 1E4 12 (12) A 250 V AC 5E4 12 (12) A 250 V AC 1E4 12 (8) A 250 V AC 1E4 10 (8) A 250 V AC 5E4 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches 16 A V AC 12 A V AC 1/2 HP 5 A 125 V AC L vertical 3 Ag 7.0 ± resting pin Terminal type Terminal description 4.8 horizontal Contact distance (mm) Contact material Operating force (N) Free position (FP) max. (mm) Operating position (OP) (mm) Permissible total travel position (TP) (mm) EN cap. 30 conform G 3 Ag 7.0 ± horizontal 3 Ag 7.0 ± resting pin long horizontal 4.8 vertical 4.8 vertical 4.8 horizontal 4.8 horizontal 3 Ag 7.0 ± Miscellaneous flange on the end faces Actuator description Stock version 3 Ag 7.0 ± Ag 7.0 ± Ag 7.0 ± Ag 7.0 ± horizontal 3 Ag 7.0 ± rest pin horizontal 3 Ag 7.0 ± resting pin Ag 7.0 ± Normally closed contact (SPNC) horizontal 3 Ag 6.5 ± resting pin Normally open contact (SPNO) vertical 4.8 horizontal 3 Au 7.0 ± Ag 7.0 ± special housing contour Rocker switches Pushbutton switches 99 ]

102 Series Single and double-pole pushbutton switches to 16 (4) A / 12 (12) A 250 V AC Rocker Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches double-pole ON / OFF switch (DPST) 8 (8) A 250 V AC 1E4 16 (4) A 250 V AC 1E4 12 (12) A 250 V AC 5E4 12 (12) A 250 V AC 1E4 12 (8) A 250 V AC 1E4 10 (8) A 250 V AC 5E4 16 A V AC A V AC 1/2 HP A 125 V AC L Terminal type Terminal description 6.3 vertical 4.8 horizontal 4.8 vertical 4.8 vertical Contact distance (mm) Contact material Operating force (N) Free position (FP) max. (mm) Operating position (OP) (mm) Permissible total travel position (TP) (mm) EN cap. 30 conform G 3 Ag 9.0 ± Ag 9.0 ± Ag 9.0 ± Ag 9.0 ± vertical 3 Ag 9.0 ± Normally open contact (DPNO) 4.8 horizontal 4.8 horizontal 180 angled 180 angled 3 Ag 9.0 ± Ag 9.0 ± Ag 9.0 ± Ag 10 ± horizontal 3 Ag 9.0 ± vertical 4.8 vertical 4.8 horizontal Miscellaneous special housing contour ±0.3 ±0.3 ±0.3 3 Ag 9.0 ± Ag 9.0 ± Ag 9.0 ± rest pin with cap Actuator description Stock version \ 100

103 Series Single and double-pole pushbutton switches to 16 (4) A / 12 (12) A 250 V AC Basic type 1681 single-pole Quick-connect terminal 4.8 x 0.8 vertical (actuator with holder for different caps) h Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches 8 Quick-connect terminal 4.8 x 0.8 vertical (standard actuator) PCB terminal vertical 6 6 h h 8 1.6± Quick-connect terminal 4.8 x 0.8 vertical (shortened actuator) h 8 Quick-connect terminal 4.8 x 0.8 horizontal (standard actuator) DIN A PCB terminal vertical (standard actuator) 6 h h 1.6± Rocker switches Pushbutton switches 101 ]

104 Series Single and double-pole pushbutton switches to 16 (4) A / 12 (12) A 250 V AC Rocker Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Basic type 1681 single-pole Cut terminal (actuator with holder for different caps) PCB terminal horizontal (actuator with holder for different caps) ±0.1 ø1.6±0.1 ø ø PCB terminal horizontal normally closed contact SPNC (actuator with holder for different caps) ± DIN A h Quick-connect terminal 4.8 x 0.8 horizontal (shortened actuator) ± PCB terminal horizontal (shortened actuator) h \ 102

105 Series Single and double-pole pushbutton switches to 16 (4) A / 12 (12) A 250 V AC Basic types 1682 and 1689 double-pole Quick-connect terminal 4.8 x 0.8 vertical (shortened actuator) DIN A Quick-connect terminal 4.8 x 0.8 vertical (standard actuator) Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches h 8 SW OFF ON BL h Quick-connect terminal 4.8 x 0.8 horizontal (standard actuator) DIN A ø Quick-connect terminal 4.8 x 0.8 vertical (with mounted cap) Quick-connect terminal 4.8 x 0.8 horizontal (actuator with holder for different caps) PCB terminal vertical (actuator with holder for different caps) h 6 1.6± Rocker switches Pushbutton switches 103 ]

106 Series Single and double-pole pushbutton switches to 16 (4) A / 12 (12) A 250 V AC Rocker Switches Pushbutton Switches h Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Basic types 1682 and 1689 double-pole 4.5 Quick-connect terminal 4.8 x 0.8 horizontal (shortened actuator without cut-out) h ø4 ø1.6± PCB terminal 180 angled (shortened actuator) 2.5 ø Quick-connect terminal 6.3 vertical (actuator with holder for different caps) PCB terminal horizontal (shortened actuator without cut-out) h= \ 104

107 Series Single and double-pole pushbutton switches to 16 A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Million times proven, double lifting contact system High electrical rating up to 16 A High rating with mechanical switching cycles Illuminated and non-illuminated variants Mechanical life endurance 10E4 Operating force approx. 8 N (basic type 1683) approx. 12 N Contact resistance (new condition) Insulation resistance (new condition) Proof tracking < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Ambient temperature terminal side -20 C C actuating side -20 C C Flammability Glow wire test temperature 850 C UL 94 (actuator: V-0, socket: V-1, housing: V-2) UL 94 V-0 Actuator IP 40 IP 65 and IP 67 (product- dependent) Material actuator housing Plug force of the terminals PC / EPDM / PA Latamid PA / PA glass fiber-reinforced / PA C3U / PA Latamid glass fiber-reinforced 80 N Approval marks 7 / 1 / 4 Suitable for appliances of protection class II On request Other colors Printing Other lamp variants Snap-on customized actuators Other terminal variants (e.g. 6.3 x 0.8 mm) Cable assembly Variant with dust and water protection 105 ]

108 Series Single and double-pole pushbutton switches to 16 A 250 V AC Rocker Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches single-pole ON / OFF switch (SPST) Lighting voltage (V) Actuator color / printing 16 (4) A 250 V AC 1E4 12 (8) A 250 V AC 1E4 10 (8) A 250 V AC 5E Ag IP Ag Ag IP Ag Normally open contact (SPNO) 12 A V AC 1/2 HP Terminal type Terminal description Contact distance (mm) Contact material Free position (FP) max. (mm) Operating position (OP) (mm) Permissible total travel position (TP) (mm) Actuator IP 65 and IP 67 IP 65 and IP / 2 x Au IP 40 lamp terminal (2.8) external Ag IP Ag IP 40 double-pole ON / OFF switch (DPST) Lighting voltage (V) Actuator color / printing 16 (4) A 250 V AC 1E4 12 (8) A 250 V AC 1E4 10 (8) A 250 V AC 5E4 12 A V AC 1/2 HP Terminal type Ag IP Ag IP Ag IP 40 snap-on actuator Ag IP 40 Terminal description Contact distance (mm) Contact material Free position (FP) max. (mm) Operating position (OP) (mm) Permissible total travel position (TP) (mm) Actuator Miscellaneous Miscellaneous Stock version Stock version Normally open contact (SPNO) Ag IP 65 and IP 67 \ 106

109 Series Single and double-pole pushbutton switches to 16 A 250 V AC Basic type 1683 single-pole non-illuminated X = Wall thickness x y z Basic types 1683, 1684, 1686 and 1687 single and double-pole illuminated / non-illuminated X = Wall thickness x y z Quick-connect terminal 4.8 x Quick-connect terminal 4.8 x 0.8 horizontal Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches h Quick-connect terminal 4.8 x and with bellows for IP 65/IP h Quick-connect terminal 4.8 x 0.8 horizontal Rocker switches Pushbutton switches 107 ]

110 Series Single and double-pole pushbutton switches to 16 A 250 V AC Rocker Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches 2 Basic types 1683, 1684, 1686 and 1687 single and double-pole illuminated / non-illuminated X = Wall thickness x y z Protection cap Quick-connect terminal 4.8 x 0.8 / 2 x 2.8 x 0.8 with external lamp Quick-connect terminal 4.8 x 0.8 basic type PCB terminal vertical ± h Quick-connect terminal 4.8 x , , , basic types 1687 and Quick-connect terminal 4.8 x 0.8 basic type 1684 Transparent PVC-protection cap for dust and water protection from the actuation side 13 \ 108

111 Series Smallest single-pole pushbutton switches for low voltages Product features Small compact pushbutton switch for indirect actuation High rating with mechanical cycles Pushbutton snapping on customized actuators On request For mains applications Customized actuators Different operating force Rocker switches Mechanical life endurance Operating force 10E4 6.0 ±1.0 N Pushbutton switches Ambient temperature terminal side -25 C C Material actuator housing terminals ON / OFF switch (SPST) Actuator color / printing Housing color Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches 5 ma 30 V Terminal type PA PA silver plated < 3 Au Normally open contact (SPNO) x 0.5 < 3 Au Basic type Terminal description Contact distance (mm) Contact material Free position (FP) max. (mm) Operating position (OP) (mm) Quick-connect terminal 2.8 x 0.5 Permissible total travel position (TP) (mm) Miscellaneous PCB terminal Stock version 109 ]

112 series Double-pole pushbutton switches to 7 (7) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Powerful single and double-pole pushbutton switch up to 10 A 125 V AC Optionally with fastening strip and interference suppression capacitor Support point terminal (single-pole normally open contact) Dust-protected Mechanical life endurance 1E5 Actuator IP 40 Material actuator housing Approval marks 7 / 1 / 4 / 5 Suitable for appliances of protection class II On request Other terminal types PA glass fiber-reinforced Desmopan / PA glass fiber-reinforced \ 110

113 series Double-pole pushbutton switches to 7 (7) A 250 V AC single-pole Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches 10 (10) A 127 V AC 5E4 7 (7) A 250 V AC 5E4 10 A 125 V AC 5 A 250 V AC Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Rocker switches Pushbutton switches Normally open contact (SPNO) double-pole 10 (10) A 127 V AC 5E4 7 (7) A 250 V AC 5E4 10 A 125 V AC 5 A 250 V AC Normally open contact (DPNO) Terminal type 2 x M3.5 2 x St 2.8 angled 2 x St 2.8 angled 2 x M3.5 2 x 2.8 x x 2.8 x 0.8 Terminal description 2 x M3.5 2 x St 2.8 angled 2 x St 2.8 angled 2 x M3.5 2 x 2.8 x x 2.8 x ø5 3 Ag without strip 3 Ag with strip Contact distance (mm) Contact material 3 3 Ag Ag Miscellaneous without strip without support terminal with strip without support terminal ø Stock version M M Basic type 1247 Screw terminal mains side Quick-connect terminal motor side Quick-connect terminal additional connection with strip and Screw terminal mains side Quick-connect terminal motor side Quick-connect terminal additional connection without strip and ]

114 series Round pushbutton switches for at least mechanical switching cycles Pushbutton Switches Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Product features Attractive, round pushbutton switch Efficient contact system at least mechanical switching cycles Variants with sealing cap for IP 54 dust and water protection Appliance cut-out with diameter 16 mm, alternatively with fixing pin Mechanical life endurance Proof tracking 20E4 250 PTI Protection type IP 40 IP 54 (in variants with sealing cap) Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Type of fastening Plug force of the terminals PA glass fiber-reinforced PA glass fiber-reinforced silver plated Snap fastening 64 N Approval marks 7 / 1 / 4 Suitable for appliances of protection class II On request Other colors Actuator printing Snap-on for greater wall thickness Cable assembly \ 112

115 series Round pushbutton switches for at least mechanical switching cycles single-pole Actuator color / printing Housing color 4 (2) A 250 V AC 5E4 4 A 125 V AC 1/10 HP 2 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Contact material Pretravel max. (mm) Total travel / stroke (mm) Miscellaneous Stock version Rocker switches Pushbutton switches Normally open contact (SPNO) Ag 2.0 ± Ag 2.0 ± Ag 2.0 ± Ag 2.0 ± fixing pin Ag 2.0 ± fixing pin Ag 2.0 ± fixing pin with IP 54 sealing cap Basic type 5000 x X = Wall thickness Ø ø20 ø17 4 ø ± Quick-connect terminal 2.8 x ø20 ø ± Quick-connect terminal 2.8 x 0.8 (with fixing pin) and ø ø ±0.1 ø21 R ø20 ø11 4 ø ø ±0.1 Quick-connect terminal 2.8 x 0.8 (with fixing pin and IP 54 sealing cap) R 2.4± ]

116 series Single-pole pushbutton switches to 2 (1) A 250 V AC Pushbutton Switches Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Product features Small, compact pushbutton switch Long life endurance with mechanical switching cycles Special design for dust and water protection Mechanical life endurance Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 50E4 approx. 1 N 4.0 N ( ) < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals PA PA silver plated / tinned Bearing terminal silver plated tinned Plug force of the terminals 80 N Approval marks 7 Suitable for appliances of protection class II On request Other colors With printing Other terminal variants Cable assembly \ 114

117 series Single-pole pushbutton switches to 2 (1) A 250 V AC single-pole Actuator color / printing Housing color 2 (1) A 250 V AC 5E4 30 ma 12 V DC 5E4 Terminal type Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Rocker switches Pushbutton switches Normally open contact (SPNO) < 3 Ag < 3 Ag x 0.5 < 3 Ag < 3 Au electrical life endurance: < 3 Ag switch actuating force 4 N Basic type 1846 X = Wall thickness x y z x Quick-connect terminal 2.8 x 0.5 Solder terminal PCB terminal x Transparent PVC-protection cap. Serves as dust and water protection for the actuating side Protection cap ]

118 Series Single and double-pole pushbutton switches to 6 (4) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features 100 million times proven switching principle with long life endurance with mechanical switching cycles Fastening by round nut M12 Excellent actuating characteristic Variant for snapping on customized pushbuttons Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 10E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals PA PA glass fiber-reinforced / PA silver plated 80 N Approval marks 7 / 1 / 4 Suitable for appliances of protection class II On request Higher power with 6 (6) A 250 V AC Other terminal types Cable assembly \ 116

119 Series Single and double-pole pushbutton switches to 6 (4) A 250 V AC single-pole Actuator color / printing Housing color Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 5E4 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Rocker switches Pushbutton switches ON / OFF switch (SPST) Ag Ag Normally closed contact (SPNC) snap-on actuator caps see page Ag Normally open contact (SPNO) Ag Changeover switch (SPDT) Ag Changeover switch (SPDT momentary) Ag double-pole ON / OFF switch (DPST) Actuator color / printing Housing color 6 (4) A 250 V AC 5E Ag Ag 6 (2) A 250 V AC 5E4 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous snap-on actuator caps see page 119 Stock version 117 ]

120 Series Single and double-pole pushbutton switches to 6 (4) A 250 V AC Rocker Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Basic types 1841 and 1843 single-pole Basic type 1842 double-pole Identification plate M12x0.75 ø Quick-connect terminal 4.8 x M12x0.75 Quick-connect terminal 4.8 x 0.8 ON OFF ø Aluminum identification plate to plugging on and with black inscription ON and OFF Identification plate made of CuZn nickel-plated for plugging on as well as with twist protection and stamped inscription ON and OFF Identification plate \ 118

121 Series Single and double-pole pushbutton switches to 6 (4) A 250 V AC Protection cap Pushbutton Pushbutton ø 22 SW 19 ø Neopren -cap for pushbutton (M12 x 0.75) basic type 1840 as dust and water protection. Pushbutton plate on top of cap is CuZn nickel plated. Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton made of PA black, with diameter 20 mm for assembly by customer on and Pushbutton made of PA black, rectangular 20 x 25 mm for assembly by customer on and Rocker switches Pushbutton switches 119 ]

122 Series Single and double-pole pushbutton switches to 16 (4) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Illuminated and non-illuminated pushbutton switches Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent with external lamp terminal Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 5E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II PC (product-dependent) / PA PA / PA glass fiber-reinforced (product-dependent) Cu 80 N On request Other colors Other printing variants Other terminal types Other lamp variants Cable assembly 7 / 1 / 4 (product-dependend) / ß \ 120

123 Series Single and double-pole pushbutton switches to 16 (4) A 250 V AC single-pole Lighting voltage (V) Actuator color / printing Housing color Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches 16 (4) A 250 V AC 1E4 16 (4) A 250 V AC 12 (4) A 250 V AC 1E4 12 A 250 V AC 1/2 HP 12 A 125 V AC 1/6 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Rocker switches Pushbutton switches ON / OFF switch (SPST) Ag Normally open contact (SPNO) / 2 x Ag external lamp terminal Ag Changeover switch (SPDT momentary) < 3 Ag double-pole ON / OFF switch (DPST) Lighting voltage (V) Actuator color / printing Housing color 16 (4) A 250 V AC 1E4 16 (4) A 250 V AC 12 (4) A 250 V AC 1E4 12 A 250 V AC 1/2 HP 12 A 125 V AC 1/6 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Ag Ag / 2 x Ag external lamp terminal Ag Ag Normally open contact (DPNO) Ag Changeover switch (DPDT momentary) < 3 Ag 121 ]

124 Series Single and double-pole pushbutton switches to 16 (4) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Rocker Switches Pushbutton Switches Lamp Lighting voltage (V) Actuator color / printing Housing color 16 (4) A 250 V AC 1E4 16 (4) A 250 V AC 12 (4) A 250 V AC 1E4 12 A 250 V AC 1/2 HP 12 A 125 V AC 1/6 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Lamp Basic types 1660, 1661 and 1663 double-pole illuminated / non-illuminated X = Wall thickness x y z A Quick-connect terminal 4.8 x Quick-connect terminal 6.3 x 0.8 / 2 x 4.8 x 0.8 with external lamp terminal Quick-connect terminal 6.3 x 0.8 \ 122

125 Series Single and double-pole pushbutton switches to 16 (4) A 250 V AC Rocker switches Pushbutton switches Basic type 1667 lamp X = Wall thickness x y z Gasket Protection cap Quick-connect terminal 6.3 x Gasket made of EPDM black for sealing between switch and appliance for increased dust and water protection Transparent PVC-protection cap for switches of the basic types 1660, 1662, 1663, 1664, 1665 and Serves as dust and water protection of the actuation side. Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Dummy piece for size of basic type 1667 made of PA with housing and cover in black and with mounted gasket ( ) for dust and water protection. 25 Dummy piece ]

126 Series Single and double-pole pushbutton switches to 16 (4) A 250 V AC Pushbutton Switches Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Product features Illuminated and non-illuminated pushbutton switch Internal gasket for IP 54 Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent with external lamp terminal Mechanical life endurance Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 5E4 1E4 approx. 8 N < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 54 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II PC (product-dependent) / PA PA / PA glass fiber-reinforced (product-dependent) Cu 80 N 7 / ß On request Other colors Other printing variants Other terminal types Other lamp variants Cable assembly Approval mark UL \ 124

127 Series Single and double-pole pushbutton switches to 16 (4) A 250 V AC single-pole Lighting voltage (V) Actuator color / printing Housing color Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches 16 (4) A 250 V AC 1E4 12 (4) A 250 V AC 1E4 Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Rocker switches Pushbutton switches Normally open contact (SPNO) / 2 x Ag external lamp terminals Ag Changeover switch (SPDT) < 3 Ag double-pole ON / OFF switch (DPST) Lighting voltage (V) Actuator color / printing Housing color Ag 16 (4) A 250 V AC 1E4 12 (4) A 250 V AC 1E4 Terminal type Ag Ag Terminal description Contact distance (mm) Contact material Ag Ag Ag Normally open contact (DPNO) Ag Miscellaneous Stock version 125 ]

128 Series Single and double-pole pushbutton switches to 16 (4) A 250 V AC Rocker Switches Pushbutton Switches Lamp Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Lighting voltage (V) Actuator color / printing Housing color 16 (4) A 250 V AC 1E4 12 (4) A 250 V AC 1E4 Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Lamp Basic types 1672, 1673 and 1675 single-pole illuminated / non-illuminated X = Wall thickness x y z Quick-connect terminal 4.8 x Quick-connect terminal 6.3 x 0.8 basic type Quick-connect terminal 6.3 x 0.8 / 2 x 4.8 x 0.8 external lamp terminal basic type 1675 \ 126

129 Series Single and double-pole pushbutton switches to 16 (4) A 250 V AC Rocker switches 22.5 Basic types 1670 and 1671 double-pole illuminated / non-illuminated Basic type 1677 lamp X = Wall thickness x y z X = Wall thickness x y z Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Quick-connect terminal 6.3 x Quick-connect terminal 6.3 x 0.8 Dummy piece for size of basic type 1677 made of PA with housing in black and cover in blue Pushbutton switches Dummy piece ]

130 Order Day and Night In our web shop you can order more than 200 standard switches independent of time and place: 24 hours per day, 7 days per week. \

131 Toggle Switches Rocker switches Rocker switches Pushbutton Switches Toggle Switches Toggle Switches Pushbutton switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches Sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches ECO 129 ]

132 Toggle Switches Rocker Switches Series 0350 Three-pole toggle switches to 10 (4) A 400 V AC \ Page 131 Toggle Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Series 1810 Single and double-pole toggle switches to 10 (4) A 250 V AC Appliance cut-out: 19.2 x 12.9 mm 19.2 x 21.9 mm Series 1820 Single and double-pole toggle switches to 6 (4) A 250 V AC Appliance cut-out: Ø 12 mm Series 0100 Single-pole toggle switches to 2 A 250 V AC Appliance cut-out: Ø 12 mm \ Page \ Page \ Page \ 130

133 series Three-pole toggle switches to 10 (4) A 400 V AC Product features Robust and efficient rocker switch with mechanical switching cycles With dust seal Approval for 400 V Mechanical life endurance Material actuator housing terminals 1E5 Approval marks 7 Suitable for appliances of protection class II three-pole ON / OFF switch (TPST) Actuator color / printing Housing color 10 (4) A 400 V AC 5E4 On request Other terminal types Duroplast Duroplast / PA glass fiber-reinforced chromated Terminal type Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Terminal description M3.5 3 Ag lever with red dot M3.5 3 Ag Basic type M Contact distance (mm) Socket terminal M3.5 Contact material M Miscellaneous 3 auxiliary terminals lever with red dot Stock version Rocker switches Toggle Switches Pushbutton switches 131 ]

134 Series Single and double-pole toggle switches to 10 (4) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Attractive toggle switches 100 million times proven switching principle Long life endurance with mechanical switching cycles Excellent actuating characteristic Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 5E4 (changeover switch with OFF position in center) 10E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals PA PA silver plated 80 N Approval marks 7 / 1 / 4 Suitable for appliances of protection class II On request Other colors Other printing variants Other switching functions Other terminal variants Cable assembly \ 132

135 Series Single and double-pole toggle switches to 10 (4) A 250 V AC single-pole ON / OFF switch (SPST) Actuator color / printing Housing color 10 (4) A 250 V AC 1E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (2) A 250 V AC 1E4 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Ag Normally open contact (SPNO) Ag Changeover switch (SPDT) Ag Changeover switch with OFF position in the center (SPDT - Center OFF) Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches < 3 Ag < 3 Ag momentary function one side < 3 Ag momentary function one side < 3 Ag momentary function one side double-pole ON / OFF switch (DPST) Actuator color / printing Housing color 10 (4) A 250 V AC 1E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (2) A 250 V AC 1E4 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Ag Changeover switch (DPDT) Rocker switches Toggle Switches Pushbutton switches Ag Changeover switch with OFF position in the center (DPDT - Center OFF) < 3 Ag < 3 Ag momentary function both sides 133 ]

136 Series Single and double-pole toggle switches to 10 (4) A 250 V AC Rocker Switches Toggle Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Basic types 1811, 1813 and 1818 single-pole X = Wall thickness Quick-connect terminal 4.8 x 0.8 basic type Quick-connect terminal 4.8 x 0.8 basic types 1813 and 1811 without third terminal x y z Basic types 1812, 1814 and 1819 double-pole X = Wall thickness x y z PCB terminal basic type Quick-connect terminal 4.8 x 0.8 basic type PCB terminal basic type Quick-connect terminal 4.8 x 0.8 basic type 1819 \ 134

137 Series Single and double-pole toggle switches to 6 (4) A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features 100 million times proven switching principle Long life endurance with mechanical switching cycles Excellent actuating characteristic Fastening with nut M12 Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 5E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals PA PA glass fiber-reinforced / PA silver plated 80 N Approval marks 7 / 1 / 4 Suitable for appliances of protection class II On request Other colors Other switching functions Other terminal variants Cable assembly 135 ]

138 Series Single and double-pole toggle switches to 6 (4) A 250 V AC Rocker Switches Toggle Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches single-pole ON / OFF switch (SPST) Actuator color / printing Housing color 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Ag Ag Changeover switch (SPDT) Ag Ag Changeover switch with OFF position in the center (SPDT - Center OFF) < 3 Ag < 3 Ag momentary function one side < 3 Ag momentary function both sides double-pole ON / OFF switch (DPST) Actuator color / printing Housing color 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP Terminal type Terminal description Contact distance (mm) Contact material Miscellaneous Stock version Ag Changeover switch (DPDT) Ag Changeover switch with OFF position in the center (DPDT - Center OFF) < 3 Ag < 3 Ag momentary function both sides \ 136

139 Series Single and double-pole toggle switches to 6 (4) A 250 V AC Basic types 1821, 1823 and 1828 single-pole M12x0.75 Quick-connect terminal 4.8 x 0.8 basic type 1828 ø ø4 M12x M12x0.75 Quick-connect terminal 4.8 x 0.8 basic types 1821 and 1823 ø Rocker switches Toggle Switches Pushbutton switches Basic types 1822, 1824 and 1829 double-pole Identification plate Solder terminal and x0.8 M12x0.75 Quick-connect terminal 4.8 x 0.8 basic type 1822 and 1824 ON Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches OFF ø M12x0.75 ø4 Quick-connect terminal 4.8 x 0.8 basic type 1829 Aluminum identification plate to plugging on and with black inscription ON and OFF 137 ]

140 Series Single and double-pole toggle switches to 6 (4) A 250 V AC Rocker Switches Identification plate made of CuZn nickel-plated for plugging on as well as with twist protection and stamped inscription ON and OFF Toggle Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Identification plate Protection cap green black red Lever receptacle black white red green ø ø ø 6.4 ø 5.2 Neopren -cap for screwing on (M12 x 0.75) to levers of the series 1820 for dust and water protection of the actuator side Lever receptacle in various colors for the plastic levers of the 1820 series for customer assembly. Serves as a design element and for distinguishing and marking. \ 138

141 series Single-pole toggle switches to 2 A 250 V AC Toggle Switches Pushbutton switches Rocker switches Product features Robust and powerful toggle switch with mechanical switching cycles Central fastening with nut M12 Metal or plastic lever Mechanical life endurance Material actuator housing terminals single-pole ON / OFF switch (SPST) Actuator color / printing Housing color 2 A 250 V 1E3 5E4 On request Other terminal variants metal / PA (product-dependent) CnZn nickel-plated / Duroplast (base) / chromated galvanized steel (bracket plate) silver plated Terminal type Contact distance (mm) Contact material Miscellaneous Stock version Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches CuZn silver plated actuating torque 45.0 ±14.0 Nmm CuZn silver plated actuating torque 45.0 ±14.0 Nmm metal lever 139 ]

142 series Single-pole toggle switches to 2 A 250 V AC Rocker Switches M12x ø Toggle Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Basic type 0100 Identification plate Identification plate Solder terminal ON OFF ø Aluminum identification plate to plugging on and with black inscription ON and OFF Identification plate made of CuZn nickel-plated for plugging on and with twist protection and stamped inscription ON and OFF \ 140

143 Slide Switches Rocker switches Rocker switches Pushbutton Switches Toggle Switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches Sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ECO 141 ]

144 Slide Switches Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Series 4021 Double and four-pole slide switches to 10 A 125 V or 5 A 250 V AC (as voltage selector switch) Series 1206 Single-pole slide switches to 8 (8) A 250 V AC \ Page \ Page \ 142

145 series Double and four-pole slide switches to 10 A 125 V or 5 A 250 V AC (as voltage selector switch) Rocker switches Product features Different designs Various terminal types Suitable as voltage selector switch (for currentless switching) Sunken slide for protection against accidental actuation Simple assembly with screws Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 1E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches PA PA / hard paper (baseplate) / PA glass fiber-reinforced (baseplate) silver plated / chromated 60 N Approval marks 7 / 1 / 4 On request Other colors Other labels Single to four-pole variants Other terminal variants (e.g. PCB side) 143 ]

146 series Double and four-pole slide switches to 10 A 125 V or 5 A 250 V AC (as voltage selector switch) Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches double-pole Changeover switch (DPDT) Actuator color / printing Housing color 10 A 125 V AC 1E V V 230V 230V 5 A 250 V AC 1E4 2 (0.5) A 250 V AC 1E4 2 A 42 V AC 1E4 10 A 125 V AC 5 A 250 V AC Terminal type Terminal description Contact distance (mm) 3 3 side Changeover switch with OFF position in the center (DPDT - Center OFF) long 3 four-pole Changeover switch (FPDT) Actuator color / printing Housing color 10 A 125 V AC 1E A 250 V AC 1E4 2 (0.5) A 250 V AC 1E4 2 A 42 V AC 1E4 10 A 125 V AC 5 A 250 V AC Terminal type Terminal description Contact distance (mm) Contact material CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated Contact material CuSn silver plated CuSn silver plated Miscellaneous 5 A or 10 A only as voltage selector switch 5 A or 10 A only as voltage selector switch slide with actuating slot Stock version 5 A or 10 A only as voltage selector switch 5 A or 10 A only as voltage selector switch slide with actuating slot 5 A or 10 A only as voltage selector switch slide with actuating slot 5 A or 10 A only as voltage selector switch Miscellaneous slide with actuating slot slide with actuating slot Stock version \ 144

147 series Double and four-pole slide switches to 10 A 125 V or 5 A 250 V AC (as voltage selector switch) Rocker switches Basic type 4021 double-pole Basic type 4024 four-pole Wire-Wrap 5 long Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches x Solder terminal and Quick-connect terminal 2.8 x x Quick-connect terminal 2.8 x and x PCB terminal R PCB terminal Slide with actuating slot and ]

148 series Double and four-pole slide switches to 10 A 125 V or 5 A 250 V AC (as voltage selector switch) Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Inscription \ 146

149 series Single-pole slide switches to 8 (8) A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Powerful up to 25 A at V DC Single-pole slide switch optionally with fastening strip For direct and indirect actuation Dust protected Castable Mechanical life endurance 1E5 Actuator IP 40 Material actuator housing terminals Approval marks 7 / 1 / 4 Suitable for appliances of protection class II PA glass fiber-reinforced PA glass fiber-reinforced silver plated On request Other colors Other terminal types For snapping on customized slides 147 ]

150 series Single-pole slide switches to 8 (8) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches single-pole ON / OFF switch (SPST) Actuator color / printing Housing color 8 (8) A 250 V AC 5E4 25 A V DC 15 A 125 V AC Ag with slide for direct actuation Ag with slide for direct actuation Basic type A 250 V AC ST Terminal type Solder terminal Contact distance (mm) Contact material Miscellaneous 5 ST ø ±0.2 PCB terminal ±0.2 ø ±0.1 ø ±0.1 11±0.2 Stock version Further information under \ 148

151 Rotary switches Rocker switches Rocker switches Pushbutton Switches Toggle Switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches Sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ECO 149 ]

152 Rotary switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Series 1703 Powerful rotary switches to 20 (4) A 400 V AC \ Page \ 150

153 series Powerful rotary switches to 20 (4) A 400 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Creep and air distances greater than 8 mm, therefore suitable for mains and touchable low voltage 60 switching angle (1-6 switching steps) Fastening with thread M3 or bayonet connection With mechanical forced opening Approval for 400 V Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 3E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 400 PTI Protection type IP 40 Ambient temperature terminal side -20 C C C Flammability Glow wire test temperature 850 C Material actuator housing terminals Plug force of the terminals Approval marks 7 Suitable for appliances of protection class II UL 94 (housing: V-0, spindle: V-2) PA PA glass fiber-reinforced silver plated respectively bare 80 N On request Single to six-pole variant Other switching functions and sequences Other terminal variants Cable assembly Customized actuators Gold contacts 151 ]

154 series Powerful rotary switches to 20 (4) A 400 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches double-pole ON / OFF switch (DPST) Actuator color / printing Housing color 20 (4) A 400 V AC 1E4 16 (16) A 250 V AC 5E4 Terminal type Ag 1 switching step (60 ) Ag 1 switching step (60 ) Step switch three-pole Actuator color / printing Housing color 20 (4) A 400 V AC 1E4 16 (16) A 250 V AC 5E4 Terminal type Ag 3 switching positions Basic type Terminal description Terminal description 6 Contact distance (mm) Contact distance (mm) Quick-connect terminal 6.3 x x0.8 Contact material Contact material Miscellaneous Miscellaneous Stock version Stock version \ 152

155 Foot switches Rocker switches Rocker switches Pushbutton Switches Toggle Switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches Sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ECO 153 ]

156 Foot switches Rocker Switches Series 2410 Ergonomic foot switches to 6 (2.5) A 250 V AC \ Page Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Series 2420 IP 65 / 67 protected foot switch to 16 (4) A 250 V AC 25E3 \ Page \ 154

157 series Ergonomic foot switches to 6 (2.5) A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Long life endurance up to mechanical switching cycles Robust design Cable can be retrofitted by customer Ergonomical dimensions with different operating forces With wall hanger Mechanical life endurance Proof tracking Material actuator housing 30E4 250 PTI PA PA Approval marks 7 On request Other colors Customized cable assembly Special switching functions Other terminal variants 155 ]

158 series Ergonomic foot switches to 6 (2.5) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches single-pole Normally open contact (SPNO) Actuator color / printing Housing color 6 (2.5) A 250 V AC 5E Changeover switch (SPDT momentary) double-pole Normally open contact (DPNO) Actuator color / printing Housing color 6 (2.5) A 250 V AC 5E4 Terminal type Terminal description 2 terminals M3 M3 3 terminals assembled 3 Ag 45 ±7 N Combination Actuator color / printing Housing color 6 (2.5) A 250 V AC 5E4 Terminal type Terminal type Terminal description Terminal description Contact distance (mm) Contact material Operating force (N) Miscellaneous < 3 Ag 31 ±5 with switch < 3 Ag 31 ±5 with switch Contact distance (mm) Contact distance (mm) Contact material Contact material Normally closed contact (SPNC) / Changeover switch (SPDT momentary) Operating force (N) Operating force (N) Miscellaneous 1 x PE connector (3 000 mm) / 1 x PE coupling (250 mm) 2 x Miscellaneous Stock version Stock version Stock version M3 3 terminals < 3 Ag Normally open contact (SPNO) / Changeover switch (SPDT momentary) step 1: 25 ± 5 N/ step 2: 85 ± 15 N with switch with switch switching in sequence M3 5 terminals < 3 Ag step 1: 22 N ± 4 / step 2: 31±5 N with switch with switch switching in sequence Changeover switch and normally open contact can be connected separately \ 156

159 series Ergonomic foot switches to 6 (2.5) A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Basic type 2410 Protection hood Circuit diagram bu - blue br - brown bl - black wh - white C - common terminal NC - normally closed contact NO - normally open contact Socket terminal 2 terminals M3 bu br bl wh 86 NC C NO NC C Steel plate protection hood in orange color similar to RAL 2004 with edge guard and rubber feet as well as fixation for foot switch of the basic type br wh bl bl bl C C NC NO NO ]

160 series IP 65 / 67 protected foot switch to 16 (4) A 250 V AC 25E3 Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Protected against dust and water (IP 65 / IP 67) Snap-action switching system proved millions of times Compact design with clearly discernable tactile feedback, robust and anti-slip, screw holes for fixing to the floor (optional) Versions for low DC signal currents, up to ratings of 16 A 250 V AC Wide range of switching functions, with and without cables Modern switch design, rocker available in different colors, can be printed to customer specifications Cable assembly on customer side Mechanical life endurance Proof tracking 2E6 250 PTI Protection type IP 65 and IP 67 Ambient temperature terminal side -20 C C actuating side -20 C C Material actuator housing terminals Approval marks 7 Suitable for appliances of protection class II PA glass fiber-reinforced PA glass fiber-reinforced nickel-plated On request Special switching functions Other colors Customer logo Customized cable assembly \ 158

161 series IP 65 / 67 protected foot switch to 16 (4) A 250 V AC 25E3 single-pole ON / OFF switch (SPST) Actuator color / printing Housing color 14 (4) A 250 V AC 5E4 Terminal type Terminal description Contact distance (mm) M3 < 3 Ag 35 ±10 with strain relief Normally open contact (SPNO) M3 < 3 Ag 35 ±10 with strain relief M3 < 3 Ag 35 ±10 with strain relief double-pole Normally open contact (DPNO) Actuator color / printing Housing color Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 14 (4) A 250 V AC 5E Combination Actuator color / printing Housing color 14 (4) A 250 V AC 5E4 Terminal type Terminal type assembled with wire end ferrule Terminal description assembled with wire end ferrule Terminal description Contact material Operating force (N) < 3 Ag 35 ±10 Contact distance (mm) Contact material Operating force (N) < 3 Ag 35 ±10 Contact distance (mm) Contact material Operating force (N) Miscellaneous with strain relief two-wire connecting cable Miscellaneous 1 x PE connector (3 000 mm) / 1 x PE coupling (250 mm) with strain relief Miscellaneous Stock version Stock version Stock version Rocker switches Normally open contact (SPNO) M3 < 3 Ag step 1: 29 ± 10N / step 2: 51± 35N with strain relief 159 ]

162 series IP 65 / 67 protected foot switch to 16 (4) A 250 V AC 25E3 Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Protection hood Socket terminal M Circuit diagram br - brown hbl - bright blue ws - white sw - black gnge - green/yellow hbl br C C NO NO Steel plate protection hood in orange color similar to RAL 2004 with edge guard and rubber feet as well as fixation for foot switch of the basic type hbl hbl gnge gnge br br ws sw sw ws C C C NO NO NO \ 160

163 Tact and key switches Rocker switches Rocker switches Pushbutton Switches Toggle Switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches Sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ECO 161 ]

164 Tact and key switches Rocker Switches Series 3006 Tact switches to 50 ma 28 V \ Page Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Series 6425 Key switches to 100 ma 28 V Series 6450 Key switches to 100 ma 28 V Series 3000 Key switches to 30 ma 28 V \ Page \ Page \ Page 173 \ 162

165 series Tact switches TO 50 ma 28 V Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Low height even with integrated LED SMD connection technique Pleasant actuating characteristic thanks to clearly tangible pressure point Extremely large actuator surface Six standard colors Two operating force variants Reflow lead-free solderable Mechanical life endurance Contact resistance (new condition) Ambient temperature 50E4 4N version, 20E4 6N version < 100 mohm Material terminals gold plated Bounce time Packing unit Miscellaneous -40 C C (1 h to +120 C) < 5 ms On request pieces in blister belt on a roller rating max. 1W voltage range 20 mv - 28 V current range 10 µa - 50 ma electrical life endurance: 4 N: 14V DC 10 ma 50E4 6 N: 14V DC 10 ma 20E4 Other LED colors Different brightness groups 163 ]

166 series Tact switches TO 50 ma 28 V Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches single-pole max 1 Watt Normally open contact (SPNO) Contact material Operating force (N) Operating position (OP) (mm) Au ± without LED Au ± Au ± Au ± Au ± Au ± LED white Au ± Au ± Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Color lamp Miscellaneous low current consumption reduced brightness Au ± without LED Au ± Au ± LED white Basic type MC SMD connection technique K Ø SP 3.05±0.1 Stock version A ± ± ±0.1 LED w/o LED Circuit diagram with / without LED Solder pad design \ 164

167 series Key switches TO 100 ma 28 V Rocker switches Product features Single-pole normally open contact with and without LEDs Pleasant actuating characteristic and low actuation noise Low bounce time Standard with gold plated contacts Wide range of key caps for different design requirements Contact resistance (new condition) Insulation resistance (new condition) Bounce time Contact distance < 250 mohm > 100 MOhm < 5 ms < 3 mm Ambient temperature -20 C C Contact material Material Terminal type actuator housing terminals Mechanical life endurance Flammability Miscellaneous Au POM PBTP tinned PCB terminal 1E6 at 10 ma 12 V Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches UL 94 HB On request Customized key caps Other key cap colors Other LED colors Bicolor LED The key base of the standard key can be snapped into a 1.2 mm thick frame with a cut-out of x mm. A current limiting to max. 20 ma must be provided for the integrated LED! 165 ]

168 series Key switches TO 100 ma 28 V Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches 100 ma 28 V Normally open contact (SPNO) Color lamp Pitch (mm) Operating force (N) Total travel / stroke (mm) > ± 0.2 customer LED assembly possible > ± 0.2 narrow base for parallel guide ± ± ± ± ± ± ± 0.2 LED lower for button and ± 0.2 LED lower for button and > ± 0.2 LED higher for key cap > ± 0.2 LED higher for key cap Basic type Without LED or customer LED assembly Miscellaneous With LED Stock version With LED for design key caps For multiple key caps with parallel guide \ 166

169 series Key switches TO 100 ma 28 V Square key caps pitch 16 mm Square key caps pitch 19 mm Round key caps without LED window: anthracite dark gray red with LED window: anthracite dark gray Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ø ø ø ø ø without LED window: anthracite with LED window: anthracite dark gray Key cap with ergonomic actuation surface anthracite dark gray red Key cap with oval actuation surface pitch 16 mm anthracite dark gray Rocker switches Design key caps 167 ]

170 series Key switches TO 100 ma 28 V Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Design key caps Key caps with transparent cap Double key caps 16 mm pitch Teilung 16 mm / pitch 16 mm Aussparung für LED hole of LED Teilung 19 mm / pitch 19 mm Key cap with round actuation surface pitch 15 mm anthracite dark gray gray Key cap anthracite Cap transparent, enclosed loose pitch 19 mm pitch 16 mm Two-part key cap with snap-on transparent caps, individual labeling and color possibilities can be implemented at low cost by a customer inlay. For keys xx with LED and without LED. without LED window: anthracite dark gray with one LED window: anthracite without LED window: anthracite with one LED window: anthracite Double key caps 19 mm pitch \ 168

171 series Key switches TO 100 ma 28 V Rocker switches 2.5 Triple key caps Parallel guide Parallel guide anthracite pitch 16 mm , OR OR 0.1 SH ø3 SH ø3 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches FH ø1.3 TH ø FH ø1.3 TH ø anthracite pitch 19 mm Recommended appliance cut-out and perforation pattern component side parallel guide for: double key caps, pitch 16 mm The parallel guide guarantees an optimum function even in case of off-center actuation and can be equipped additionally with one or two LEDs Recommended appliance cut-out and perforation pattern component side parallel guide for: 6.8 triple key caps, pitch 16 mm double key caps, pitch 19 mm triple key caps, pitch 19 mm The parallel guide can be equipped additionally with a LED. 169 ]

172 series Key switches TO 100 ma 28 V Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Square key caps with white characters Please complete the reference numbers by the three figures below the respective character. Basic reference numbers for pitch 16 mm: anthracite Other key cap colors and characters on request \ 170

173 series Key switches TO 100 ma 28 V Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Single-pole normally open contact with key cap Narrow design with proven switching principle of series 6425 Pleasant actuating characteristic and low actuation noise Low bounce time Long life endurance Standard with gold plated contacts Contact resistance (new condition) Insulation resistance (new condition) Contact material Contact distance Bounce time < 250 mohm > 100 MOhm Au < 3 mm < 5 ms Ambient temperature -20 C C Material Terminal type actuator housing terminals Mechanical life endurance PA PBTP tinned PCB terminal 1E6 bei 10mA 12V On request Other key cap colors Labeled key caps 171 ]

174 series Key switches TO 100 ma 28 V Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Normally open contact (SPNO) Actuator color / printing 100 ma 28 V Operating force (N) ± 0.2 gray ± 0.2 dark gray ± 0.2 anthracite similar to RAL ± 0.2 red similar to RAL ± 0.2 yellow similar to RAL ± 0.2 green similar to RAL ± 0.2 blue similar RAL 5019 Basic type Total travel / stroke (mm) ø MF: 11 x mm 1.2 mm tk ø Miscellaneous Narrow key switch with integrated key cap Stock version The key base can be snapped into a 1.2 mm thick frame with a cut-out of 11 x mm. Further information under \ 172

175 series Key switches TO 30 ma 28 V Product features With one or two normally open contacts switching in sequence By separating the mechanical and electrical components, a high contact reliability and excellent actuating characteristic are achieved Terminals sealed For direct or indirect actuation Mechanical life endurance Ambient temperature -40 C C Material actuator housing terminals Contact material Contact distance 30 ma 28 V Normally open contact (SPNO) Terminal type Operating force (N) 1E5 2E4 (basic type two pressure points) PC / POM PA glass fiber-reinforced tinned Au CuSn gold-plated < 3 mm On request Double normally open contact (SPNO) Operating position (OP) (mm) Available with centrally placed LED (only version with a pressure point) Different key caps Free position (FP) max. (mm) tk Permissible total travel position (TP) (mm) Miscellaneous operating force 2: N operating position 2: Stock version Rocker switches Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Basic types 3000 and 3003 Normally open contact with one pressure point Double normally open contact with two pressure points ]

176 Order Day and Night In our web shop you can order more than 200 standard switches independent of time and place: 24 hours per day, 7 days per week. \

177 Snap-action switches Rocker switches Rocker switches Pushbutton Switches Toggle Switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches Sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ECO 175 ]

178 Snap-action switches Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Series 1055 Subsubminiature snap-action switches IP 67 to 4 A 12 V or 2 A 24 V DC Series 1050 Subminiature snap-action switches to 10 (1.5) A 250 V AC Series 1045 Subminiature snap-action switches IP 67 to 10(3) A 250 V AC 1E4 Series 1080 Miniature snap-action switches to 21 (8) A 250 V AC Series 1005 Miniature snap-action switches to 21 (8) A 250 V AC Series 1040 Rotary shaft snap-action switches to 4 (1) A 250 V AC \ Page \ Page \ Page \ Page \ Page \ Page Series 1010 Open snap-action switches to 6 (2) A 250 V AC \ Page \ 176

179 Snap-action switches Series 1019 Single-pole snap-action switches to 6 (2) A 250 V AC \ Page Rocker switches Series 1022 Snap-action switches IP 67 to 4 A 12 V DC Series 1117 Snap-action switches to 16 (6) A 400 V AC Series 1115 One pole pushbutton switches to 16 (4) A 400 V AC \ Page Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches \ Page \ Page ]

180 Series SubsuBMiniature snap-action switches IP 67 to 4 A 12 V or 2 A 24 V DC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Product features Compact design with dust and water protected switching system acc. to IP 67 (basic types 1055 / 1058) Large overtravel of 1.2 mm for small size The specially designed pushbutton guide enables a start-up angle of 40 The modular principle offers a wide selection of terminals, auxiliary actuators and fastening types On request Rating 0.5 (0.5) A 250 V AC 25E3 and ENEC approval mark For higher ambient temperatures Customized cable assembly Basic type 1058 as double switch or with cable outlet in other directions Mechanical life endurance 5E5 Contact resistance (new condition) < 50 mohm (1 A 12 V DC) Insulation resistance (new condition) > 100 MOhm (500 V DC) Protection type IP 00 terminal side basic types 1055 and 1056 IP 40 actuator side basic type 1056 IP 67 actuator side basic type 1055, terminal and actuator side basic type 1058 Ambient temperature -40 C C Flammability UL 94 HB Material actuator additional actuator housing terminals POM / LCP / silicone rubber stainless steel spring steel PBTP tinned basic type 1058: wires FLRY 0.5 mm², tinned wire ends Contact material Ag gold plated Approval marks 7 on request Shock resistance 50 g Miscellaneous terminal side sealed electrical life endurance at 24 V DC 2 A (ohmic load): 100E3, at 24 V DC 10 ma: 500E3 \ 178

181 Series SubsuBMiniature snap-action switches IP 67 to 4 A 12 V or 2 A 24 V DC 4 A 12 V DC (ohmic load) Normally closed contact (SPNC) 2 A 24 V DC (ohmic load) Normally open contact (SPNO) 0.5 (0.5) A 250 V AC 25E3 Terminal type Terminal description 400 long crimped Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description Lever drawing Miscellaneous ± pin right 1.5 long long ± pin right 1.5 long long ± pin both sides 5 long Changeover switch (SPDT momentary) ± pin right 1.5 long ± pin left 5 long coded cranked ± without pin ± pin right 1.5 long ± pin right 2.5 long ± pin left 2.5 long ± L21 pin both sides 2.5 long ± L02 without pin ± L21 pin right 2.5 long ± pin right 1.5 long ± pin right 1.5 long coded cranked coded cranked ± without pin ± without pin ± pin right 1.5 long ± pin left 1.5 long long ± pin right 1.5 long Stock version Rocker switches long ± pin both sides 5 long long ± pin both sides 2.5 long long ± L31 pin both sides 2.5 long 179 ]

182 Series SubsuBMiniature snap-action switches IP 67 to 4 A 12 V or 2 A 24 V DC Rocker Switches TP 7.9 OP 9.4±0.3 FP ø TP 7.9 OP 9.4±0.3 FP ø Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type ø2.95 Solder terminal PCB terminal coded cranked ø1.3 TP 7.9 OP 9.4±0.3 FP ø PCB terminal right angled ø x ø ø3.1 ø ø ø PCB terminal TP 7.9 OP 9.4±0.3 FP PCB terminal left angled ø ø ø3.23 ø x45 \ 180

183 Series SubsuBMiniature snap-action switches IP 67 to 4 A 12 V or 2 A 24 V DC 8 13 TP 4.65 OP 6.15±0.3 FP ø TP 4.65 OP 6.15±0.3 FP ø Rocker switches Basic type 1056 Basic type ø2.95 Solder terminal x0.5 ø PCB terminal coded cranked TP 9 OP 10.5±0.3 FP 11.5 PCB terminal right angled 300 TP 4.65 OP 6.15±0.3 FP (0.7) ø ø3.1 Cable 300 long ø ø ø ø ø2.5 ø ø2.95 PCB terminal Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 5 TP 4.65 OP 6.15±0.3 FP 7.15 ø PCB terminal left angled 0.2x ø3.23 ø ø3.1 ø ø ]

184 Series SubsuBMiniature snap-action switches IP 67 to 4 A 12 V or 2 A 24 V DC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches 40 Approach angle up to 40 Auxiliary actuators The auxiliary actuators are available as additional parts for the basic types 1055 and 1058 for retrofitting or are already pre-assembled depending on the product. When assembling yourself, make sure that the lever is pushed into the housing slot right up to the stop. The robust pushbutton guide allows actuations by slides or camshafts with an approach angle of < 40 (depending on the friction partner). The mechanical life endurance depends on the material and surface properties of the slide and the installation situation in the appliance. Under optimum conditions and longitudinal actuation, 200E3 cycles can be achieved. The above sketch can be transposed to the basic types 1056 and MP 2.2 L02: straight lever MP 17.2 L31: differential lever TP TP ±0.45 OP 11.6 FP OP 9.7±0.45 FP 11.5 L21: simulated roller TP 12.4±0.65 OP 14.7 FP fastening disc for the basic types 1055, 1056 und 1058 Fastening disc The fastening disc offers a quick, reliable fastening possibility in combination with switches with 5 mm long pins to plates or plastic parts with a wall thickness up to 2.5 mm. \ 182

185 series SuBMiniature snap-action switches to 10 (1.5) A 250 V AC Rocker switches Product features Small, efficient snap-action switches up to 10 (1.5) A 250 V AC or 10.1 A V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection of auxiliary actuators of chrome-nickel steel and plastic Design Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type DIN B 10E6 1E6 (versions with auxiliary actuator) < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 175 PTI IP 40 (actuator side) Ambient temperature -40 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material Bounce time additional actuator housing terminals PA glass fiber-reinforced / stainless steel spring steel PBTP tinned / silver plated / blank (product-dependent) < 5 ms Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Approval marks 7 / 1 / 4 On request Extended overtravel Material conformant with the filament wire test acc. to IEC :2001 chap. 30 Increased or reduced difference travel Other operating forces and ratings Gold-plated contacts Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side 183 ]

186 series SuBMiniature snap-action switches to 10 (1.5) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches 10 (1.5) A 250 V AC 1E4 Normally closed contact (SPNC) 5 A 250 V AC 5E4 2 (0.5) A 250 V AC 25E A V AC 1/4 HP 5 A V AC 1/10 HP x 0.5 Ag ± Normally open contact (SPNO) 2 A V AC Terminal type Terminal description Ag ± x 0.5 Ag ± sealed Ag ± x 0.5 Ag ± Changeover switch (SPDT momentary) Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description Lever drawing Miscellaneous greater overtravel without approval mark Ag ± sealed Ag ± greater overtravel sealed Ag ± Ag ± Ag ± foam sealing ring around pushbutton x 0.5 Ag ± x 0.5 Ag ± sealed Ag ± sealed Ag ± Ag ± fixing pin Ag ± fixing pin sealed Ag ± L sealed Ag ± L x 0.5 Ag ± L12 Stock version sealed Ag ± L sealed Ag ± L sealed Au ± x 0.5 Au ± sealed Au ± sealed Au ± L sealed Au ± L43 \ 184

187 series SuBMiniature snap-action switches to 10 (1.5) A 250 V AC Rocker switches Terminal variants Quick-connect terminal 2.8 x Solder terminal normally open contact version PCB terminal (cover side) right angled ø PCB terminal sealed ø Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Solder terminal Solder terminal normally closed contact version ø ø PCB terminal (base side) left angled 185 ]

188 series SuBMiniature snap-action switches to 10 (1.5) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Additional parts Mushroom-shaped actuator Insulating plate for solder terminal 0.5 mm: The mushroom-shaped actuator allows, in addition to the vertical actuation from above, lateral approach from any direction. In such application cases, an angle of 45 is necessary on the actuating element (angle for versions with extended overtravel on request). To keep the friction here to a minimum, we recommend the use of materials with a low friction coefficient in relation to the material PA. In addition, the surface of the actuating element should be free from valleys. The mechanical life endurance depends on the material and surface properties as well as on the form of the slide. \ 186

189 series SuBMiniature snap-action switches to 10 (1.5) A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches TP OP FP TP OP FP Rocker switches Switching positions Standard actuator TP ± OP FP ± Mushroom-shaped actuator TP OP FP ± Mushroom-shaped actuator with foam sealing ring ± Standard actuator and extended overtravel TP OP FP ± Mushroom-shaped actuator and extended overtravel 187 ]

190 series SuBMiniature snap-action switches to 10 (1.5) A 250 V AC Rocker Switches TP OP Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches FP 12.3 ø5 2.9 TP OP FP Auxiliary actuators The auxiliary actuators are available as additional parts for later assembly or are already pre-assembled depending on the product. In the adjustable versions the operating position can be set application-specifically by the set screw. L11: roller lever L21: simulated roller L01: straight lever L03: straight lever ± TP OP FP ± TP OP ±1.5 TP 5 FP 14 OP 11.5 ±4 FP 19.5 L12: roller lever R L22: simulated roller L02: straight lever (6.15) 20.6 (12.3) ± TP OP FP ± TP OP FP ± ±0.8 TP 8 L41: adjustable plastic lever OP ju FP 9-14 <_ 16 (12.3) ø5 3.8 TP OP ju FP 18.6 (12.3) 4.8 ±0.8 (6.15) 13.6 TP 16.6 ±0.2 OP ju 20 (6.15) 9.4 FP L43: adjustable roller lever L45: adjustable simulated roller \ 188

191 Series SuBMiniature snap-action switch IP 67 to 10(3) A 250 V AC 1E4 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Dust and water protected switching system according IP 67 Rating from low DC signal currents to ratings of 10 (3)A 250 VAC Versions for high motor rating up to 6 (6) A 250 VAC Versions with integrated mechanism for breaking contact weldings IEC Chapter 30 approved for household appliances More than 10 million switching cycles Design Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking DIN B 10E6, tightness up to 1.5E6 cycles 1E6 (versions with auxiliary actuator) < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 00 terminal side basic types 1045 and 1046 IP 40 actuator side basic type 1046 IP 67 actuator side basic type 1045, terminal and actuator side basic type 1048 Ambient temperature -40 C C Flammability UL 94 V-0 Glow wire test temperature 850 C Material additional actuator housing terminals Bounce time On request stainless steel spring steel PA Latamid glass fiber-reinforced tinned / faston terminals blank < 5 ms Versions with reduced difference travel Versions with mounting pegs to the side With asymmetric pinning With customized wiring Approval marks 7 / 2 (61058) Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side 189 ]

192 Rocker Switches H Series SuBMiniature snap-action switch IP 67 to 10(3) A 250 V AC 1E4 5 (5) A 250 V AC 10E3 1 A 250 V AC 100E3 3 (3) A 250 V AC 30E3 Normally closed contact (SPNC) IP ± Ag sealed Normally open contact (SPNO) IP ± Ag sealed IP ± Ag Changeover switch (SPDT momentary) IP ± Ag sealed IP ± Au sealed with positive action on NC side IP ± Ag sealed \ 190 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 6 (1) A 250 V AC 30E3 2 (1) A 250 V AC 100E3 3 A 250 V AC 100E3 10 (3) A 250 V AC 10E3 6 (6) A 250 V AC 30E3 Terminal type Terminal description Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator Actuator description Lever drawing Miscellaneous Stock version with positive action on NC side IP ± Ag 2.8 x 0.5 sealed IP ± Ag IP ± Au IP ± Ag IP ± Au IP ± Ag 2.8 x 0.5 sealed 2.8 x 0.5 sealed sealed cranked sealed coded cranked sealed coded cranked IP ± Ag sealed

193 5 (5) A 250 V AC 10E3 1 A 250 V AC 100E3 3 (3) A 250 V AC 30E3 Changeover switch (SPDT momentary) IP ± Au sealed IP ± Ag sealed IP ± Au sealed L02 IP ± Ag sealed lever on NC side mounted L02 IP ± Ag sealed L22 IP ± Ag sealed lever on NC side mounted L22 IP ±1 2.0 Ag sealed IP ± Ag sealed IP ± Au Rocker switches H Series SuBMiniature snap-action switch IP 67 to 10(3) A 250 V AC 1E4 6 (1) A 250 V AC 30E3 2 (1) A 250 V AC 100E3 3 A 250 V AC 100E3 10 (3) A 250 V AC 10E3 6 (6) A 250 V AC 30E3 Terminal type Terminal description Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator Actuator description Lever drawing Miscellaneous Stock version L02 IP ± Ag L22 IP ± Ag L02 IP ± Ag L22 IP ± Ag 2.8 x 0.5 sealed 2.8 x 0.5 sealed sealed cranked sealed cranked IP ± Ag with positive action on NC side IP ± Ag 2.8 x 0.5 sealed sealed cranked ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches

194 Rocker Switches H Series SuBMiniature snap-action switch IP 67 to 10(3) A 250 V AC 1E4 5 (5) A 250 V AC 10E3 1 A 250 V AC 100E3 3 (3) A 250 V AC 30E3 Changeover switch (SPDT momentary) cable outlet on actuator side IP ± Ag cable outlet down IP ± Au lever on NC side mounted L22 IP ±1 2.0 Ag \ 192 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 6 (1) A 250 V AC 30E3 2 (1) A 250 V AC 100E3 3 A 250 V AC 100E3 10 (3) A 250 V AC 10E3 6 (6) A 250 V AC 30E3 Terminal type Terminal description Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator Actuator description Lever drawing Miscellaneous Stock version

195 Series SuBMiniature snap-action switch IP 67 to 10(3) A 250 V AC 1E4 Basic type 1045 Quick-connect terminal 2.8 x 0.5 sealed ±0.3 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 9.3 TP OP FP 8.4± TP OP FP Ø PCB terminal sealed, coded, cranked ± TP OP FP PCB terminal sealed, left angled ±0.3 Solder terminal sealed TP OP FP 8.4±0.3 TP OP FP PCB terminal sealed, cranked ± TP OP FP Ø PCB terminal sealed, right angled Rocker switches 193 ]

196 Series SuBMiniature snap-action switch IP 67 to 10(3) A 250 V AC 1E4 Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches ± Basic type 1046 Basic type 1048 Wires potted with switch, wire ends tinned TP OP FP Quick-connect terminal 2.8 x 0.5 sealed Cable, outlet down ± TP 7.6 OP FP 9.3 Cable, outlet C side Cable, outlet NC side Ø 2.95 Ø ±0.3 TP 7.6 OP FP Cable, outlet down, normally open contact, mounting pegs \ 194

197 Series SuBMiniature snap-action switch IP 67 to 10(3) A 250 V AC 1E TP OP FP TP OP Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches FP Rocker switches Auxiliary actuators The auxiliary actuators are available as additional parts for later assembly or are already pre-assembled depending on the product. In the adjustable versions the operating position can be set application-specifically by the set screw. Switch versions without positive action feature a lever mounting point on the C and NC side, those with positive action only on the C side. L01: straight lever FP 9.5 ±1 OP 8 TP ± L02: straight lever, mounted on NC side Ø 5 L11: roller lever FP OP TP ± TP OP 15.8± Ø 5 FP L12: roller lever, mounted on NC side L02: straight lever L03: straight lever Ø 5 L12: roller lever L21: simulated roller ±1.5 TP TP TP OP 15 OP FP 11.5± OP 16.2±1.5 FP 13 16± FP TP 16.2 ±1.5 OP FP ± FP OP TP L22: simulated roller L22: simulated roller, mounted on NC side ]

198 Series SuBMiniature snap-action switch IP 67 to 10(3) A 250 V AC 1E4 Rocker Switches FP OP Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches TP R TP OP FP Auxiliary actuators (continue from page 195) ± L32: simulated roller, mounted on NC side (6.15) (12.3) Ø TP L43: adjustable roller lever OP FP (6.15) 8 L41: adjustable plastic lever (6.15) 18.6 (12.3) L45: adjustable simulated roller TP OP FP Further information under \ 196

199 series Miniature snap-action switches to 21 (8) A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features The precise mounting of the moving contact part (milled bearing blade) offers optimum snap-action even with slow actuation Wide range of ratings from 3 (1) A 250 V AC to 21 (8) A 250 V AC Versions with gold plated contacts for signal current applications Various auxiliary actuators, two suspension points Design DIN A Mechanical life endurance 2E6 (basic type 1080) 20E4 (basic type 1085) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 (actuator side) Ambient temperature -40 C C Flammability UL 94 V-0 Glow wire test temperature 850 C Material actuator additional actuator housing terminals Bounce time On request Low operating forces ( 0.15 N) Customized additional actuators Plug terminal 4.8 x 0.5 mm PETP glass fiber-reinforced stainless steel PA glass fiber-reinforced / PETP glass fiber-reinforced silver plated / CuZn < 10 ms Approval marks 7 / 1 / 4 Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side 197 ]

200 Rocker Switches H series Miniature snap-action switches to 21 (8) A 250 V AC 21 (8) A 250 V AC 1E4 16 (8) A 250 V AC 1E4 16 (4) A 250 V AC 5E4 Normally closed contact (SPNC) < ± Ag Normally open contact (SPNO) > ± Ag standing Changeover switch (SPDT momentary) < ± Ag < ± Ag < ± Ag standing < ± Ag < ± Ag 4.8 x < ± Ag < ± Ag < ± Au standing \ 198 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 16 (4) A 250 V AC 25E3 10 (4) A 250 V AC 25E3 6 (2) A 250 V AC 5E4 4 (4) A 250 V AC 5E4 3 (1) A 250 V AC 5E4 3 (1) A 250 V AC 25E3 21 A 250 V AC 2 HP 21 A 125 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A V AC 1/2 HP 16 A 125 V AC 1/3 HP 10 A 250 V AC 1/3 HP 10 A 125 V AC 1/8 HP 3 A V AC Terminal type Terminal description Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description Lever drawing Contact distance (mm) EN cap. 30 conform G Stock version < ± Ag < ± Ag 6.3 straight 6.3 PITCH < ± Au 6.3 PITCH < 3 L ± Ag 4.8 x 0.5 straight

201 series Miniature snap-action switches to 21 (8) A 250 V AC Ø ø Rocker switches Terminal variants Quick-connect terminal 4.8 x 0.5 special version straight ø Quick-connect terminal 6.3 x ø Quick-connect terminal 6.3 x 0.8 PITCH ø Short solder terminal Quick-connect terminal 4.8 x ø Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Quick-connect terminal 6.3 x 0.8 PITCH ø Solder terminal PCB terminal standing ø ø ]

202 series Miniature snap-action switches to 21 (8) A 250 V AC Rocker Switches FP: free position OP: operating position TP: permissible total travel position Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches FP OP TP Switching positions Auxiliary actuators FP 15.2± ±0.5 OP TP 13.7 (10.5) L01: straight lever FP OP TP ± L11: roller lever (10.5) FP 20.6±0.5 OP 19.3 TP (10.5) L21: simulated roller (9) (9) ø (9) R2.4± FP 15.2±1.2 OP 11.7 TP (10.5) L02: straight lever FP OP TP ± (10.5) L12: roller lever FP OP TP ± (10.5) ø4.95 L22: simulated roller (9) (9) (9) ø2.4±0.3 \ 200

203 series Miniature snap-action switches to 21 (8) A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Friction contact system whose shearing movement can loosen welding Very high inrush currents (capacitive) Contact distances less and greater than 3 mm Operating forces from 0.2 to 4.2 N Design Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking DIN A 5E6 version with lever or contact spacing > 3 mm 10E6 standard version 5E4 version with curved spring steel lever < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Ambient temperature -40 C C on request C C Flammability Glow wire test temperature 850 C Material Bounce time additional actuator housing terminals UL 94 (housing: V-0, actuator: V-2) UL 94 V-2 galvanized steel / spring steel / stainless steel Duroplast type 182 / PA glass fiber-reinforced / PA Latamid silver plated / chromated < 10 ms Approval marks 7 / 1 / 4 On request Material conformant with the filament wire test acc. to IEC :2001 chap. 30 Side bearing terminal Electrical rating 16 (16) A 250 V 5E4 for normally closed and normally open version Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side 201 ]

204 series Miniature snap-action switches to 21 (8) A 250 V AC 21 (8) A 250 V AC 25E3 20 (4) A 400 V AC 1E4 16 (16) A 250 V AC 5E4 Rocker Switches Normally closed contact (SPNC) ± Ag > ± Ag < L ± Ag > Normally open contact (SPNO) ± Ag < ± Ag > ± Ag > ± Ag < ± Ag < Changeover switch (SPDT momentary) ± Ag < ± Ag < \ 202 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 16 (4) A 400 V AC 5E4 16 (4) A 250 V AC 5E4 16 (4) A 250 V AC 25E3 12 (12) A 250 V AC 5E4 10 (6) A 250 V AC 5E4 10 (4) A 400 V AC 1E4 10 (4) A 250 V AC 5E4 8 (8) A 250 V AC 5E4 6 (2.5) A 400 V AC 5E4 6 (2.5) A 250 V AC 5E4 21 A 250 V AC 2 HP 21 A 125 V AC 1 HP 16 A 250 V AC 2 HP 16 A 125 V AC 1 HP 16 A V AC 1/2 HP 10 A V AC 1/2 HP 10 A V AC 1/4 HP 8 A V AC 1/3 HP 4 A V AC 1/6 HP Terminal type Terminal description Contact distance (mm) Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description Lever drawing Miscellaneous Stock version ± Ag > top side ± Ag < ± Ag > straight 4.8 straight

205 21 (8) A 250 V AC 25E3 20 (4) A 400 V AC 1E4 16 (16) A 250 V AC 5E4 Changeover switch (SPDT momentary) L ± Ag < ± Ag < ± Ag > ± Ag < 3 M ± Ag < ± Ag < ± Ag < L ± Ag < L ± Ag < L ± Ag < L ± Ag < L ± Ag < L ± Ag < L ± Ag < H series Miniature snap-action switches to 21 (8) A 250 V AC 16 (4) A 400 V AC 5E4 16 (4) A 250 V AC 5E4 16 (4) A 250 V AC 25E3 12 (12) A 250 V AC 5E4 10 (6) A 250 V AC 5E4 10 (4) A 400 V AC 1E4 10 (4) A 250 V AC 5E4 8 (8) A 250 V AC 5E4 6 (2.5) A 400 V AC 5E4 6 (2.5) A 250 V AC 5E4 21 A 250 V AC 2 HP 21 A 125 V AC 1 HP 16 A 250 V AC 2 HP 16 A 125 V AC 1 HP 16 A V AC 1/2 HP 10 A V AC 1/2 HP 10 A V AC 1/4 HP 8 A V AC 1/3 HP 4 A V AC 1/6 HP Terminal type Terminal description Contact distance (mm) Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description Lever drawing Miscellaneous Stock version milled bearing blade ± Ag < ] Sensors micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle switches Pushbutton switches Rocker switches

206 series Miniature snap-action switches to 21 (8) A 250 V AC 21 (8) A 250 V AC 25E3 20 (4) A 400 V AC 1E4 16 (16) A 250 V AC 5E4 Rocker Switches Changeover switch (SPDT momentary) L ± Ag < L ± Ag < L ± Ag < L ± Ag < milled bearing blade L ± Ag < milled bearing blade ± Ag < milled bearing blade ± Ag < \ 204 Sensors mikro-signalschalter Snap-Action switches Tact and key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 16 (4) A 400 V AC 5E4 16 (4) A 250 V AC 5E4 16 (4) A 250 V AC 25E3 12 (12) A 250 V AC 5E4 10 (6) A 250 V AC 5E4 10 (4) A 400 V AC 1E4 10 (4) A 250 V AC 5E4 8 (8) A 250 V AC 5E4 6 (2.5) A 400 V AC 5E4 6 (2.5) A 250 V AC 5E4 21 A 250 V AC 2 HP 21 A 125 V AC 1 HP 16 A 250 V AC 2 HP 16 A 125 V AC 1 HP 16 A V AC 1/2 HP 10 A V AC 1/2 HP 10 A V AC 1/4 HP 8 A V AC 1/3 HP 4 A V AC 1/6 HP Terminal type Terminal description Contact distance (mm) Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description Lever drawing Miscellaneous Stock version

207 series Miniature snap-action switches to 21 (8) A 250 V AC 20.2 ø ø Rocker switches Basic type 1005 Quick-connect terminal 6.3 x ø Short solder terminal 22.2 ø ø PCB terminal (base side) left angled Solder terminal ø ø3+0.1 PCB terminal (cover side) right angled Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ø Screw terminal M ]

208 series Miniature snap-action switches to 21 (8) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type 1005 Quick-connect terminal 4.8 x 0.8 straight Basic types 1004 and 1005 switching positions < ø Quick-connect terminal 6.3 x 0.8 normally open contact version FP OP ±0.5 TP ø Quick-connect terminal 4.8 x 0.8 top side 15.2 Quick-connect terminal 6.3 x 0.8 normally closed contact version FP: free position OP: operating position TP: permissible total travel position \ 206

209 series Miniature snap-action switches to 21 (8) A 250 V AC FP OP TP 22.7 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches FP OP TP 35.7 Rocker switches Basic type 1006 auxiliary actuator ± L01: straight lever FP OP TP ± L04: straight lever 23.5 FP 20.8 ±1.2 OP 18 TP L12: roller lever FP OP TP ± L31: spring lever ø ± L02: straight lever FP OP TP ± L11: roller lever FP OP TP ± ø5 L21: simulated roller ]

210 series Miniature snap-action switches to 21 (8) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Additional parts Insulating plate for solder terminal 0.5 mm: Insulating plate for quick-connect terminal 0.5 mm: mm: Stainless spring steel Lever 20.6 long with roller diameter 5 out of PA yellow (to be mounted lateral with the switch using screws) Further information under \ 208

211 series Rotary shaft snap-action switches to 4 (1) A 250 V AC Rocker switches Product features Extremely low switching torques Spring steel auxiliary actuators which are easily adaptable to customer-specific installation conditions Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type 5E6 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 actuator side IP 00 terminal side Ambient temperature -35 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Material actuator additional actuator housing terminals Contact distance Approval marks PA glass fiber-reinforced stainless steel spring steel PA glass fiber-reinforced / PETP silver plated < 3 mm ß On request Other auxiliary actuators Normally open contact version Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side 209 ]

212 H series Rotary shaft snap-action switches to 4 (1) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches 4 (1) A 250 V AC 5E4 Changeover switch (SPDT momentary) Terminal type Ag Ag Au ø ø ø TP TP TP FP 8 ±3 FP 8 ±3 FP 8 ±3 RL OP RL OP RL OP Terminal description Contact material Enclosed loose: actuating lever 80 long, diameter 0.6 mm made of stainless spring steel and fastening disc FP: free position 23 OP: operating position 8 ±3 TP: permissible total travel position 26 Pretravel angle max. 34 Overtravel angle min. 15 Difference angle 5-15 Switch actuating torque Nmm End actuating torque min. 0.2 Nmm Reset torque min 0.15 Nmm Enclosed loose: actuating lever 80 long, diameter 0.6 mm made of stainless spring steel and fastening disc FP: free position 23 OP: operating position 8 ±3 TP: permissible total travel position 26 Pretravel angle max. 34 Overtravel angle min. 15 Difference angle 5-15 Switch actuating torque Nmm End actuating torque min. 0.2 Nmm Reset torque min Nmm Without lever and fastening disc FP: free position 23 OP: operating position 8 ±3 TP: permissible total travel position 46 Pretravel angle max. 34 Overtravel angle min. 35 Difference angle 5-15 Switch actuating torque Nmm End actuating torque 0 Nmm Reset torque 0 Nmm Stock version \ 210

213 series Open snap-action switches to 6 (2) A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Powerful snap-action switch with C-spring contact system according to design DIN 41635C High switching reliability due to large contact forces directly after switching Small size, large travel and difference travel Short bounce time Contact system insensitive to vibrations Design Contact resistance (new condition) Insulation resistance (new condition) Proof tracking DIN C < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 00 Ambient temperature -20 C C C (basic type 1014) Flammability UL 94 V-2 or UL 94 HB Glow wire test temperature 850 C Material Bounce time actuator housing terminals Approval marks 7 spring steel / PA glass fiber-reinforced / PA / metal (only ) PA glass fiber-reinforced / PA silver plated < 5 ms On request Extended overtravel Special base forms Special actuating cams In addition to a wide range of normally closed contacts, normally open contacts and changeover switches and spring sets without snap function (basic type 1017) are available Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side 211 ]

214 series Open snap-action switches to 6 (2) A 250 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Normally closed contact (SPNC) Normally open contact (SPNO) (2) A 250 V AC 25E3 2 (0.5) A 250 V AC 20E4 2 (0.5) A 250 V AC 5E4 2 A 12 V DC 10E4 1 A 24 V DC 10E4 0.5 A 15 V 5E4 0.1 A 24 V DC 5E4 30 ma 12 V 5E Changeover switch (SPDT momentary) Terminal type Terminal description 9.5 long 9.5 long 9.5 long 9.2 long 9.2 long Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description Mechanical life endurance Ag ± E6 Ag ± E6 Ag ± E6 CuBe silver plated CuSn silver plated ± E ± E6 Au ± E Au ± E Ag ± E Ag ± E4 Miscellaneous without approval mark without approval mark without approval mark Ag ± E long 6.5 long Ag ± E6 Ag ± E straight Ag ± E long 9.5 long Ag ± E6 Au ± E straight Au ± E6 without approval mark small base without approval mark without approval mark standing Au ± E standing Ag ± E long 6.5 long 9.5 long Ag ± E6 Au ± E6 Ag ± E straight Ag ± E standing Au ± E4 without approval mark without approval mark without approval mark without approval mark Stock version Changeover switch with OFF position in the center (SPDT momentary - Center OFF) long Au E6 without approval mark operating range max. 4.2 \ 212

215 series Open snap-action switches to 6 (2) A 250 V AC RL FP OP TP ± RL FP OP TP ± Rocker switches Basic type Solder terminal 30 angled Solder terminal 45 angled PCB terminal straight MP RL ø1.78 ø1.78 RL ± TP=RL OP FP PCB terminal right angled RL 3 FP OP 2.2 ±0.6 TP ± TP OP FP 5 TH ø Solder terminal 45 angled 3.5 MP RL PCB terminal straight ø1.78 ø PCB terminal left angled RL Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ø ø FP OP TP ± PCB terminal right angled ± TP OP FP 2.2 RL TH ø ± TP OP FP ]

216 series Open snap-action switches to 6 (2) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type 1010 Basic type 1014 Basic type 1017 without snap function RL RL ± TP OP FP TP OP FP ± Solder terminal normally open contact version ø RL MP ± FP OP TP Changeover switch with OFF position in the center OG TP PCB terminal vertical: A switch actuation vertical to the PCB can be implemented in a confined space with this version. Vertical PCB terminal: According to the same functional principle as basic type 1010, but in smaller size. This basic type is designed for low voltages and has no approval mark FP OP TP ± PCB terminal left angled \ 214

217 series Single-pole snap-action switches to 6 (2) A 250 V AC Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Snap-action switches with and without housing Contact distance > 3 mm Normally open contact and normally closed contact version Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 20E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Ambient temperature -40 C C Flammability Glow wire test temperature 850 C Material actuator housing terminals Contact distance UL 94 (socket, lever: V-0, actuator: V-2) PA glass fiber-reinforced / PA PA glass fiber-reinforced silver plated > 3 mm On request Approval marks 7 / 1 housing variants / 4 Gold-plated contacts Customized lever variants Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side 215 ]

218 series Single-pole snap-action switches to 6 (2) A 250 V AC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Normally closed contact (SPNC) 6 (2) A 250 V AC 1E4 5 A V AC Terminal type Terminal description Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description Miscellaneous Stock version Ag ± Ag ± with housing Ag ± with housing Normally open contact (SPNO) Ag ± Ag ± Ag ± Ag ± Ag ± with housing Ag ± with housing Further information under \ 216

219 series Single-pole snap-action switches to 6 (2) A 250 V AC ø2.1 ø Rocker switches Open design with pushbutton Quick-connect terminal 2.8 x ø2.4 ø ø PCB terminal left angled Open form with lever Quick-connect terminal 2.8 x ø RL ø FP OP TP ± Closed design with pushbutton Quick-connect terminal 2.8 x RL FP OP TP ±0.6 7 ø Solder terminal Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 28 FP OP TP RL ± Closed design with lever Quick-connect terminal 2.8 x ]

220 series Snap-action switches IP 67 to 4 A 12 V DC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Product features Dust and water protection actuator and terminal side Ice-proof lever bearing Small size, large travels High switching reliability due to great contact forces directly after switching Series with different fastening possibilities Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 10E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 67 Ambient temperature -40 C C Flammability UL 94 V-2 Material actuator additional actuator housing Bounce time Contact distance Contact material Terminal description On request Customized assembly with connecting plugs Other auxiliary actuators POM / silicone rubber stainless steel spring steel PBTP < 5 ms < 3 mm gold plated 500 mm long (terminal wires 0.5 mm² molded with switch, tinned wire ends) \ 218

221 series Snap-action switches IP 67 to 4 A 12 V DC 4 A 12 V DC 10E4 2 A 24 V DC 10E4 Terminal type Changeover switch (SPDT momentary) Contact material Operating force (N) Operating position (OP) (mm) Au < ± pin right 5 long Au < ± L01 rest pin right Au < ± L Au < ± L21 Basic type 1022 Basic type with pushbutton ø Difference travel max. (mm) ø Free position (FP) max. (mm) Permissible total travel position (TP) (mm) ± Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches 6.9 TP OP FP ± TP OP FP ad ±2 Actuator description Lever drawing Miscellaneous 1 pin right side adjustable operating position by top side metal eye ±2 1 pin left side adjustable operating position by top side metal eye ± ø4.6 (24) TP OP FP ø ±0.05 L01: straight lever and snap pin L21: simulated roller lever, on centering pin and a metal eye ø ± tk Stock version ø Rocker switches With the elongated hole fastening the switch can be swiveled around the pin and then fixed with a screw. This makes the operating position adjustable by ±2 mm. 219 ]

222 series Snap-action switches to 16 (6) A 400 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Double interrupting jump contact switching system Contact distance > 3 mm Material conformant with the filament wire test acc. to IEC :2001 chap. 30 and UL 94 V-0 Large overtravel Actuator can be approached from all directions Normally open contact and normally closed contact versions Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 10E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature -40 C C Flammability UL 94 V-0 Glow wire test temperature 850 C Material actuator housing terminals Contact material Contact distance PA glass fiber-reinforced PA glass fiber-reinforced silver plated Ag 3 mm On request Customized versions Changeover basic type 1115 and 1116 Approval marks 7 / 1 / 4 Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side \ 220

223 series Snap-action switches to 16 (6) A 400 V AC Normally closed contact (SPNC) 16 (6) A 400 V AC 1E4 12 A 250 V AC 1/2 HP 12 A 125 V AC 1/6 HP Terminal type Terminal description Contact distance (mm) Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Stock version ± ± Normally open contact (SPNO) ± ± Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches FP OP TP ± ø ø Quick-connect terminal 6.3 x 0.8 Basic type 1117 Rocker switches 221 ]

224 series Single-pole pushbutton switches to 16 (4) A 400 V AC Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Product features Double lifting contact system Contact distance > 3 mm Actuator can be approached from all directions Normally open-, Normally closed- and combined (changeover) version Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 10E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature -40 C C Flammability UL 94 V-0 Glow wire test temperature 850 C Material actuator housing terminals Contact material Contact distance PA glass fiber-reinforced PA glass ball reinforced, black, ultrasonic welded silver plated Ag > 3 mm < 3 mm On request Customized versions G-conform according IEC :2001 chap. 30 UL 94 V-0 Approval marks 7 / 1 (product-dependend) / 4 Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side \ 222

225 series Single-pole pushbutton switches to 16 (4) A 400 V AC 16 (4) A 400 V AC 1E4 Normally closed contact (SPNC) 16 (2) A 380 V AC 1E4 12 A 125 V AC 1/6 HP 6 A 250 V AC 1/6 HP Terminal type Terminal description > ± Normally open contact (SPNO) > ± ± Changeover switch (SPDT momentary) < ± Basic type Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Contact distance (mm) Operating force (N) Quick-connect terminal 6.3 x Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Stock version Rocker switches 223 ]

226 Order Day and Night In our web shop you can order more than 200 standard switches independent of time and place: 24 hours per day, 7 days per week. \

227 Micro-signal switches Rocker switches Rocker switches Pushbutton Switches Toggle Switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches Sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ECO 225 ]

228 Micro-signal switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Series 1065 Micro-signal switches to 100 ma 30 V DC \ Page \ 226

229 series Micro-signal switches TO 100 ma 30 V DC Rocker switches Product features Redundant contact system for high switching reliability by double contacting Self-cleaning contact system due to wiping contacting Center-zero version (basic type 1075) for detecting 3 switching positions Noiseless switching system Large overtravel Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) 200E3 < 500 mohm (1 A 12 V DC) Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches > 100 MOhm (500 V DC) Protection type IP 00 terminal side basic types 1065 and 1075 IP 67 actuator side all basic types, terminal side basic type 1068 Ambient temperature -40 C C Flammability Material actuator additional actuator housing terminals Contact material Shock resistance Miscellaneous UL 94 HB On request Other fastening pins Other lever forms Customized cable assembly Diagnosis capable versions POM / silicone rubber stainless steel spring steel PBTP tinned AuCo 50 g terminal side sealed electrical life endurance at 14 V DC 10 ma 200E3, at 30V DC 100 ma 40E3 227 ]

230 series Micro-signal switches TO 100 ma 30 V DC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches 25 V DC 100 ma 30 V DC 40E3 Terminal type Terminal description Operating force (N) Changeover switch (SPDT momentary) can be diagnosed ± Normally open contact (SPNO) Changeover switch (SPDT momentary) 300 long 300 long Switching point NCC (mm) Minimum OFF range (mm) Switching point NOC (mm) Rest position (FP) max. (mm) Permissible end position (TP) (mm) Actuator description Lever drawing Miscellaneous with resistor circuit pin right 2.5 long ± pin right 5 long ± ± pin both sides 5 long ± ± pin both sides 2.5 long coded cranked ± ± without pin ± ± pin both sides 2.5 long ± ± pin both sides 2.5 long ± ± L02 pin both sides 5 long ± ± L21 pin both sides 2.5 long ± ± L31 pin right 5 long coded cranked 300 long 300 long ± ± L21 without pin ± ± pin both sides 5 long long ± ± pin right 2.5 long Changeover switch with OFF position in the center (SPDT momentary - Center OFF) ± ± pin both sides 2.5 long coded cranked ± ± without pin ± ± pin right 2.5 long ± ± pin left 2.5 long Stock version \ 228

231 series Micro-signal switches TO 100 ma 30 V DC 3.6 ± ±0.2 ø1.9 Rocker switches Basic type 1065 Basic type ±0.2 5 ø1.8 Solder terminal 5 ø1.5 PCB terminal coded and cranked PCB terminal right angled TH: Ø ±0.05 ø x 45 ø ±0.05 Cable 300 long, tinned wire ends ±0.05 ø x 45 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ø ø ± ± FP OP NC OP NO TP 5.6 ± ± ± ±0.2 TP OP NO PCB terminal 3.23 ±0.2 ø x 45 ø PCB terminal left angled OP NC FP ø ±0.05 TH: Ø1.3 9 ±0.05 ø x ± ]

232 series Micro-signal switches TO 100 ma 30 V DC Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type 1060/1070 Basic type 1075 Auxiliary actuators 13 R2 ø ø L01: straight lever R1 TP 6.85 OP NO 8 ±0.3 OF OP NC 9.45 ±0.3 FP ø 3.23 TP 7.35 OP NO 9.15 ±0.45 OP NC 9.65 ±0.45 TP 9 FP OP NO ±0.65 OP NC ±0.65 L21: simulated roller lever FP 14.7 ø Switch diagnostics capability Integrated resistors feature a circuit monitoring (short circuit, cable break, bad plug contatcs) Due to the OFF range between the normally closed contact and the normally open contact increased in relation to basic type 1065 the switch can be used for determining three switching positions. As a result two conventional switches can be replaced by one of these new switch versions in many applications. L02: straight lever TP 7.35 OP NO 9.15 ±0.45 OP 7.35 L31: differential levers OP NC 9.65 ±0.45 FP OP NO 9.15 ±0.45 OP NC 9.65 ±0.45 FP \ 230

233 series Micro-signal switches TO 100 ma 30 V DC Fastening disc for the basic types 1065, 1068 and 1075 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Additional parts The fastening disc offers a fast, reliable fastening possibility in combination with switches with 5 mm long pins on plates or plastic parts with a wall thickness of up to 2.5 mm. 231 ]

234 Order Day and Night In our web shop you can order more than 200 standard switches independent of time and place: 24 hours per day, 7 days per week. \

235 Sensors Rocker switches Rocker switches Pushbutton Switches Toggle Switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches ECO 233 ]

236 Sensors Rocker Switches Series 2061 Flow sensors for water volumes up to 15 l/min \ Page Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Series 2066 Analogue pressure sensors for water and air pressure measurement up to 10 bar \ Page \ 234

237 series Flow sensors for water volumes up to 15 l/min Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Robust flywheel flow meter for water with electrical pulse output Wide measuring range with 2-15 l/min Scanning by magnetic field sensor Enables hot/cold, water and energy saving as well as quality improvement Excellent linearity EMC protected Medium Measuring range water l/min Life endurance 200 m³ Bursting pressure 8 bar Accuracy / tolerance l/min ± 5%, 4-15 l/min ±3% Material housing POM Ambient temperature +5 C C Sensor description Power supply Output current Output signal Pulse pressure drop at 10 l/min: < 0.4 bar V DC (for Hall sensors variants) ma 200 ± 3% pulses / liter On request Hall or reed contact Optimized measuring ranges for different application areas Optional: different pulse/liter ratios Increased life endurance Spray water protection for electronics min. pulse width 1 ms break ratio (Hall sensor) symmetrical Approval marks 1 / ]

238 series Flow sensors for water volumes up to 15 l/min Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Rocker Switches Power supply Terminal type V DC SNAP 2.5 hose nozzle customer-specific V DC RAST 2.5 hose nozzle Basic type 2061 Ø Ø 15 Ø Snap fastening SNAP 2.5 hose nozzle Terminal description Miscellaneous Stock version \ 236

239 series Analogue pressure sensors for water and air pressure measurement up to 10 bar Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Magnetic pressure sensor with analogue output Long life endurance Robust and simple structure Linear measuring range Fully automatic 100 % test and adjustment Versions can be used for drinking water On request Different measuring ranges Adaptation of the output voltage Supply voltage variants Integrated digital switching output Other electrical / mechanical adaptation Medium heating water air water Measuring range bar / 0-65 psi / kpa 0-10 bar / psi / 0-1 MPa Bursting pressure > 9 bar / 130 psi / 0.9 MPa > 42 bar / 609 psi / 4.2 MPa (10 bar version) Medium +2 C C Storage -40 C C Ambient temperature -10 C C Sensor description maximum current consumption < 14 ma (12 ma typ.) 237 ]

240 series Analogue pressure sensors for water and air pressure measurement up to 10 bar Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Pressure sensor Power supply V DC (ratiometric) V DC (ratiometric) V DC (ratiometric) V DC (ratiometric) V DC V DC V DC (ratiometric) V DC (ratiometric) V DC (ratiometric) Terminal description 4-pole with plug SNAP pole with plug SNAP pole with plug SNAP pole with plug SNAP pole with plug SNAP pole with plug SNAP pole with plug SNAP pole with plug SNAP pole with plug SNAP 2.5 Measuring range bar / 0-65 psi / kpa bar / 0-65 psi / kpa bar / 0-65 psi / kpa bar / 0-65 psi / kpa bar / 0-65 psi / kpa bar / 0-65 psi / kpa bar / 0-65 psi / kpa 0-10 bar / psi / 0-1 MPa 0-10 bar / psi / 0-1 MPa Output signal proportional: V at 0 bar, 3.6 V at 4.5 bar proportional: V at 0 bar, 3.6 V at 4.5 bar proportional: 0.5 V at 0 bar, 2.7 V at 4.5 bar proportional: 0.5 V at 0 bar, 2.7 V at 4.5 bar proportional: 0.5 V at 0 bar, 3.8 V at 4.5 bar proportional: 0.5 V at 0 bar, 3.8 V at 4.5 bar proportional: V at 0 bar, 3.6 V at 4.5 bar proportional: 0.5 V at 0 bar, 3.5 V at 10 bar proportional: 0.5 V at 0 bar, 3.5 V at 10 bar Miscellaneous plugging flange thread flange / external thread G 3/8 plugging flange thread flange / external thread G 3/8 controlled voltage supply plugging flange controlled voltage supply thread flange / external thread G 3/8 plugging flange thread flange / external thread G 3/8 plugging flange Stock version Further information under \ 238

241 series Analogue pressure sensors for water and air pressure measurement up to 10 bar Ø Ø Ø 10.5 Ø 10 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Basic type 2066 (plugging flange) 4.5 bar version Basic type 2066 (thread flange) 4.5 bar version Basic type 2066 (plugging flange) 10 bar version 11.2 Ø 27.8 Snap fastening 4-pole with plug SNAP 2.5 Ø 20 Ø Ø 28.8 G 3/ Snap fastening 4-pole with plug SNAP 2.5 Ø Ø Ø Ø 31 Snap fastening 3-pole with plug SNAP G 3/ Ø G3/ Basic type 2066 (thread flange) 10 bar version Snap fastening 3-pole with plug SNAP ]

242 Order Day and Night In our web shop you can order more than 200 standard switches independent of time and place: 24 hours per day, 7 days per week. \

243 ECo Rocker switches Rocker switches Pushbutton Switches Pushbutton switches Toggle Switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches Sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches ECO 241 ]

244 ECo Rocker Switches Series 1550 ECO Single-pole rocker switches to 10 (4) A 250 V AC 1E4 \ Page Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Series 1086 ECO Single-pole pushbutton switches to 10 (3) A 250 V AC 1E4 \ Page \ 242

245 series 1550 ECO - Single-pole rocker switches to 10 (4) A 250 V AC 1E4 Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Automatic switching off with flexible timer 4s - 71 h (auto-off) Automatice switching off with signal from the end device (remote-off) 100 million times proven switching principle Symmetric actuation characteristic Compact, one piece solution High design variety Auto-off version with intelligent current detection Energy neutral through total single-pole galvanic separation - Zero-Watt Stable, automatic snap-in from the back Mechanical life endurance Contact distance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 5E4 3 mm < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature terminal side -20 C C actuating side -20 C C Flammability UL 94 V-2 Glow wire test temperature 850 C Material actuator housing Plug force of the terminals PA PA 80 N Approval marks 7 / 2 Suitable for appliances of protection class II On request Other colors Other printing variants Other shut off times Other lamp variants Other installation method Other terminal types Other trigger types Higher electrical rating 243 ]

246 series 1550 ECO - Single-pole rocker switches to 10 (4) A 250 V AC 1E4 Rocker Switches Pushbutton Switches single-pole Lighting voltage in V Actuator color / printing Housing color 7 A 250 V AC 5E4 10 (4) A 250 V AC 25E3 Terminal type Terminal description Contact material Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches EN cap. 30 conform G Miscellaneous Stock version ON / OFF switch (SPST) Ag Ag Ag Ag auto-off-function auto-off time: t = 30 min. auto-off-function auto-off time: t = 1h with current detection auto-off-function auto-off time: t = 15 min. auto-off-function auto-off time: t = 15 min Ag remote-off function Ag standard switch without ECO function Ag remote-off function Ag standard switch without ECO function Basic type 1550 ECO Quick-connect terminal 4.8 x 0.8 auto-off auto-off with current detection Schaltwinkel switching angle Schaltwinkel switching angle a 1b Quick-connect terminal 4.8 x 0.8 ON / OFF standard version illuminated Schaltwinkel switching angle Quick-connect terminal 4.8 x 0.8 ON / OFF standard version Schaltwinkel switching angle a 1b Quick-connect terminal 4.8 x 0.8 Remote-OFF 1 1c \ 244

247 series 1550 ECO - Single-pole rocker switches to 10 (4) A 250 V AC 1E Installation frame with flange and latching from the front side Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Rocker switches Installation frame 217.xxx.xxx Holder clamp on request Pushbutton switches Holder clamp made of metall as installation alternative. Switch is delivered with attached clamps. 245 ]

248 series 1086 ECO - Single-pole pushbutton switches to 10 (3) A 250 V AC 1E4 Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Rocker Switches Product features Automatic switching off with signal from the end device (remote-off) Version with auxiliary contact for a delayed shut-off by the end device 100 million times proven 1080 snap-action switching system Compact, one piece solution Variable actuator design with holder Energy neutral through total single-pole galvanic separation - Zero-Watt Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking 20E4 < 100 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI Protection type IP 40 Ambient temperature -40 C C Flammability UL 94 V-0 Glow wire test temperature 850 C Material actuator additional actuator housing terminals PA stainless steel PA silver plated On request Other terminal variants Customized actuators Cable assembly Higher electrical ratings Approval marks 7 / 2 Operating force 2.5 N \ 246

249 series 1086 ECO - Single-pole pushbutton switches to 10 (3) A 250 V AC 1E4 single-pole ON / OFF switch (SPST) Basic type (3) A 250 V AC 1E4 Terminal type Terminal description 2.8 x x Contact distance (mm) Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Contact material Operating force (N) Rocker switches Pushbutton switches Free position (FP) max. (mm) Operating position (OP) (mm) Permissible total travel position (mm) EN cap. 30 conform G > 3 Ag ± > 3 Ag ± ± FP OP TP Quick-connect terminal 2.8 x 0.5, 4.8 x 0.8, 6.3 x ± FP OP TP Miscellaneous Remote-off with auxiliary contactor Stock version Quick-connect terminal 2.8 x 0.5, 4.8 x 0.8, 6.3 x 0.8 Socket (2.0 mm) for auxiliary contact ]

250 Order Day and Night In our web shop you can order more than 200 standard switches independent of time and place: 24 hours per day, 7 days per week. \

251 Rocker switches Rocker switches Pushbutton Switches Pushbutton switches Toggle Switches Slide Switches Rotary switches Foot switches Tact and key switches Snap-action switches micro-signal switches Sensors Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches ECO 249 ]

252 Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Series 3450 Keyless-Go-System Universal Keyless-Go-System for Off-Road Vehicles \ Page \ 250

253 series 3450 Keyless-Go-System universal Keyless-Go-System for Off-Road Vehicles Pushbutton switches Rocker switches PRODUCT FEATURES Keyless start of vehicles (keyless) Generally available off-the-shelf system System outputs configurable over CAN-Bus Simple adaption with hardwired outputs using HITAG2 encryption for information exchange between key and ECU Simple integration with no additional tooling and development costs Good price-performance ratio Proven Marquardt technology with numerous premium car companies Operating voltage 8 16 V DC Sleep current < 100 µa Operating temperature -40 C +85 C Frequencies Mechanical life endurance Mating connector ECU Range Interfaces LF KHz (ECU to key) RF MHz (key to ECU) MTBF 15 years; Key battery life: 5 years (battery changeable) Tyco sealed 12 pins Adjustable up to 4 meters CAN Security hitag 2 Outputs Inputs Package Standard optional Protection Type IP 65 and IP 67 ON REQUEST With keyless-entry-function 24 V-version Customer specific key fob Solution for fleet management Remote keyless-entry-function High-side Driver 0.4 A continuous 2 Relays (NO and NC): - 25 A max. carrying current for 10 minutes - 30 A max. switching current CAN 2 Wire Hardwire Momentary switch (start/stop input) 1 ECU, 2 keys Start/Stop button, connector for ECU Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches 251 ]

254 series 3450 Keyless-Go-System universal Keyless-Go-System for Off-Road Vehicles Rocker Switches Pushbutton Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Example system operation: 1. Start/Stop button gets pressed, system wakes up. 2. ECU sends location field to search key. 3. Key picks up field strength. 4. Key sends strength to ECU. 5. ECU compares strength with a predefined threshold. 6. ECU enables functionality when key is in range. If valid key is not in range, ECU will search two more times before going back to sleep mode. Start/Stop button gets pressed second time, all outputs turn off, ECU goes to sleep mode. Circuit Field strength Drawings (dimensions in mm) \ 252