An-10 Wireless Lighting Control

Size: px

Start display at page:

Download "An-10 Wireless Lighting Control"

Marian Blake
5 years ago
Views:

Wireless Lighting Control The is a unique wireless system designed to control lighting. The can operate alone or be part of a new or existing lighting system.

The creates tremendous flexibility, as the system can be increased or decreased without limit.

offices that can be simply adapted according to new requirements.

often make it impossible to lay cables to control lighting. The system is fully flexible and uses two-way communication.

The two-way communication requires an acknowledgement to each command, thus guaranteeing that operation is just as secure as with cables.

1 Wireless Lighting Control The is a unique wireless system designed to control lighting. The can operate alone or be part of a new or existing lighting system. The creates unique benefits as the connection between sensor and receiver is wireless. This eliminates the need for expensive or complicated wiring. The creates tremendous flexibility, as the system can be increased or decreased without limit. This offers excellent benefits in hospitals, office and other commercial premises where the division of space can be easily changed and also, for example, sports halls and workplaces in open-plan offices that can be simply adapted according to new requirements. Other examples of areas where the wireless technology offers major benefits are cultural buildings, churches and other similar buildings where both aesthetic requirements and technical complications often make it impossible to lay cables to control lighting. The system is fully flexible and uses two-way communication. Each system component both receives and transmits information, which means that in principle the range is infinite. The two-way communication requires an acknowledgement to each command, thus guaranteeing that operation is just as secure as with cables. The offers smart new solutions to a number of typical dilemmas: Example 1: Stairwells: the lighting should be switched on in line with the direction of typical traffic. The makes this possible and simple. Without any unsightly/expensive installation of cables, lighting can be switched on from the entrance to the stairwell and lift. In a stairwell the lighting is automatically switched on at whichever level you are on, and if required also on the levels above and/or below. Example 2: Offices, classrooms, meeting rooms: the lighting in communal areas must remain on (possibly at a low level) as long as presence is detected in the rooms. The makes this possible and simple. The system can easily be coded so that, for example, the exit route is lit up without any unsightly/expensive cables. The system can be extended with 400 nodes. Example 3: Warehouses often change. Racks and stored items are often moved around. With the, you can separate sensor control from the fixtures, and sensors can be positioned along the typical route of traffic without any expensive cables.

PIR Wireless Presence Sensor Wireless Compact PIR sensor with modular quick connector for efficient installation. The sensor is available in three different models.

17 091 06 EBDSPIR-AT-DD-IQ Art. 760161 E no. 17 091 07 EBDSPIR-AT-AD-IQ Art. 760162 E no.

2 PIR Wireless Presence Sensor Wireless Compact PIR sensor with modular quick connector for efficient installation. The sensor is available in three different models. The sensor has two-way communication with other units. Suitable for installation in small areas, or an infinite number of sensors can be connected in parallel. EBDSPIR-AT-PRM-IQ Art E no EBDSPIR-AT-DD-IQ Art E no EBDSPIR-AT-AD-IQ Art E no EBDSPIR-AT-PRM-IQ, EBDSPIR-AT-DD-IQ, EBDSPIR-AT-AD-IQ Wireless communication with all other units in the system Low profile - Height of 3 mm All technology in the sensor Modular quick connector allows for pre-installation of electricity External installation with box DBB-IQ or DBB- Control 10 A regardless of load All settings programmes easily using the remote-controlled programming handsets UHS4-IQ and Detection range EBDSPIR-AT-DD-IQ and EBDSPIR-AT-AD-IQ Two channels; Channel 1 on/off Channel 2 DSI/DALI or 1-10 V (EBDSPIR-AT-AD-IQ) Integrated daylight sensor EBDSPIR-AT-PRM-IQ EBDSPIR-AT-DD-IQ EBDSPIR-AT-AD-IQ LUMINAIRE 1-10 V PRODUCT EBDSPIR-AT- PRM-IQ EBDSPIR-AT- DD-IQ EBDSPIR-AT-AD-IQ SENSOR TYPE 360 PIR AN PIR AN PIR AN-10 IP 40 IP 40 IP 40 CHANNEL 1 ON/OFF MAX. LOAD 10 A 10 A 10 A MAX. NO. OF BALLASTS if only channel 10 2 is used. (otherwise INTERNAL CONSUMPTION OFF INTERNAL CONSUMPTION ON NO CONTROL KNOB ON SENSOR WITH, USER Locked UHS4-IQ Locked UHS4-IQ Locked UHS4-IQ FULLY AUTOMATED ON/OFF SEMI-AUTOMATED MANUAL ON/ DETECTION RANGE 7m diameter at 2.8 7m diameter at 2.8 PRES- ENCE ADJUSTABLE LUX - ADJUSTABLE LUX - PRESENCE 7m diameter at 2.8 m ceiling height. TIME DELAY, STEPLESS 10 sec-99 min 10 sec-99 min 10 sec-99 min AUTO BURN-IN OF FLUORESCENT - Yes Yes MANUAL POWER SWITCH - Yes Yes PUSH BUTTON OR SHUTTER SWITCH DETECTION Can be selected Can be selected Can be selected AVAILABLE TO ORDER WITH HIGHER BOX FOR EXTERNAL INSTALLATION DBB-IQ DBB-IQ DBB-IQ BOX FOR WALL INSTALLATION DBB- DBB- DBB- COLOUR white RAL 9003 white RAL 9003 white RAL 9003 DIMENSIONS (Diameter/depth mm) 76/65 76/65 76/65 PRODUCT WEIGHT (KG)

PIR Wireless Corridor Sensor Wireless HF corridor sensor with a detection range of up to 30 m.

If required, the sensor s detection range can be targeted for corridorlike detection areas, see diagram. Suitable for larger rooms, corridors, etc. MWS3A-AT-PRM-IQ Art. 760163 E no.

3 PIR Wireless Corridor Sensor Wireless HF corridor sensor with a detection range of up to 30 m. Flexible system to create advanced lighting control systems with simple programming and without extensive installation work. The system can be easily extended as the property is automated. If required, the sensor s detection range can be targeted for corridorlike detection areas, see diagram. Suitable for larger rooms, corridors, etc. MWS3A-AT-PRM-IQ Art E no MWS3A-AT-DD-IQ Art E no MWS3A-AT-AD-IQ Art E no MWS3A-AT-PRM-IQ, MWS3A-AT-DD-IQ, MWS3A-AT-AD-IQ Wireless communication with all other units in the system Low profile - Height of 3 mm All technology in the sensor Modular quick connector allows for pre-installation of electrical connection External installation with box MWS3A-DBB-IQ or MWS3A-DBB- Control 10 A regardless of load Programmable via wireless programming handset Detection range MWS3A-AT-DD-IQ and MWS3A-AT-AD-IQ Channel 2 DSI/DALI or 1-10 V (MWS3A-AT-AD-IQ) MWS3A-AT-PRM-IQ MWS3A-AT-DD-IQ MWS3A-AT-AD-IQ LUMINAIRE 1-10 V PRODUCT MWS3A-AT-PRM-IQ MWS3A-AT-DD-IQ MWS3A-AT-AD-IQ SENSOR TYPE HF AN10 HF AN10 HF AN10 IP 40 IP 40 IP 40 CHANNEL 1 ON/OFF Yes Yes - MAX. LOAD 10 A 10 A 10 A MAX. NO. OF BALLASTS if only channel 2 10 is used. (otherwise INTERNAL CONSUMPTION OFF 909 mw 959 mw 961 mw INTERNAL CONSUMPTION ON 1500 mw 1500 mw 1500 mw NO CONTROL KNOB ON SENSOR No No No WITH, USER Locked UHS4-IQ Locked UHS4-IQ Locked UHS4-IQ FULLY AUTOMATED ON/OFF SEMI-AUTOMATED MANUAL ON/ DETECTION RANGE 6x22 m oval at 2.6 6x22 m oval at 2.6 6x22 m oval at 2.6 PRESENCE ADJUSTABLE LUX - ADJUSTABLE LUX - PRESENCE TIME DELAY, STEPLESS 10 sec-99 min 10 sec-99 min 10 sec-99 min AUTO BURN-IN OF FLUORESCENT - Yes Yes MANUAL POWER SWITCH AT-BB-IN-IQ AT-BB-IN-IQ AT-BB-IN-IQ PUSH BUTTON OR SHUTTER SWITCH DETECTION Can be selected Can be selected Can be selected AVAILABLE TO ORDER WITH HIGHER BOX FOR EXTERNAL INSTALLATION MWS3A-DBB-IQ MWS3A-DBB-IQ MWS3A-DBB-IQ BOX FOR WALL INSTALLATION MWS3A-DBB- MWS3A-DBB- MWS3A-DBB- COLOUR white RAL 9003 white RAL 9003 white RAL 9003 DIMENSIONS (Diameter/depth mm) 95/92 95/92 95/92 PRODUCT WEIGHT (KG)

4 Integrated relay Wireless lighting relay for installation in fixture. The relay is installed in the fixture and receives a wireless signal from one or more sensors. Has two-way communication with other units in the system, providing a high level of reliability. One benefit is that the lighting control system can combine on/off, Dali, Dsi and 1-10 V products. Suitable for installation in all kinds of fixtures. AT-SL-R -IQ Art E no AT-SL-DDR-IQ Art E no AT-SL-ADR-IQ Art E no AT-SL-R-IQ, AT-SL-DDR-IQ, AT-SL-ADR-IQ Wireless communication with all other units Control 2 A load Programmable via programming handset 133 AT-SL-DDR-IQ and AT-SL-ADR-IQ Channel 2 DSI/DALI or 1-10 V (AT-SL-ADR-IQ) AT-SL-R -IQ AT-SL-DDR-IQ AT-SL-ADR-IQ PRODUCT AT-SL-R-IQ AT-SL-DDR-IQ AT-SL-ADR-IQ SENSOR TYPE AN-10 AN-10 AN-10 IP 40 IP 40 IP 40 CHANNEL 1 ON/OFF MAX. LOAD 2 A 2 A 2 A MAX. NO. OF BALLASTS if only channel 10 2 is used. (otherwise INTERNAL CONSUMPTION OFF INTERNAL CONSUMPTION ON NO CONTROL KNOB ON SENSOR WITH, USER Locked UHS4-IQ Locked UHS4-IQ Locked UHS4-IQ FULLY AUTOMATED ON/OFF SEMI-AUTOMATED MANUAL ON/ DETECTION RANGE PRESENCE ADJUSTABLE LUX - ADJUSTABLE LUX - PRESENCE TIME DELAY, STEPLESS AUTO BURN-IN OF FLUORESCENT - Yes Yes MANUAL POWER SWITCH AT-BB-IN-IQ AT-BB-IN-IQ AT-BB-IN-IQ PUSH BUTTON OR SHUTTER SWITCH DETECTION AVAILABLE TO ORDER WITH HIGHER BOX FOR EXTERNAL INSTALLATION BOX FOR WALL INSTALLATION COLOUR Green Green Green DIMENSIONS (Diameter/depth mm) 133/22.5/ /22.5/ /22.5/20.5 PRODUCT WEIGHT (KG)

External relay Wireless lighting relay for installation inside or close to fixture. The relay receives a wireless signal from one or more sensors.

5 External relay Wireless lighting relay for installation inside or close to fixture. The relay receives a wireless signal from one or more sensors. Has two-way communication with other units in the system, providing a high level of reliability. One benefit is that the lighting control system can combine on/off, DALI, DSI and 1-10 V products. Suitable for installation with all kinds of fixtures. AT-SL-R-SA-IQ Art E no AT-SL-DDR-SA-IQ Art E no AT-SL-ADR-SA-IQ Art E no AT-SL-R-SA-IQ, AT-SL-DDR-SA-IQ, AT-SL-ADR-SA-IQ Wireless communication with all other units in the system Control 2 A load Programmable via programming handset AT-SL-DDR-SA-IQ and AT-SL-ADR-SA-IQ Channel 2 DSI/DALI or 1-10 V (AT-SL-ADR-SA-IQ) AT-SL-R-SA-IQ AT-SL-DDR-SA-IQ AT-SL-ADR-SA-IQ PRODUCT AT-SL-R-SA-IQ AT-SL-R-SA-IQ AT-SL-ADR-SA-IQ SENSOR TYPE AN-10 AN-10 AN-10 IP 40 IP 40 IP 40 CHANNEL 1 ON/OFF Yes Yes - MAX. LOAD 2 A 2 A 2 A MAX. NO. OF BALLASTS if only channel 10 2 is used. (otherwise INTERNAL CONSUMPTION OFF INTERNAL CONSUMPTION ON NO CONTROL KNOB ON SENSOR WITH, USER Locked UHS4-IQ Locked UHS4-IQ Locked UHS4-IQ FULLY AUTOMATED ON/OFF SEMI-AUTOMATED MANUAL ON/ DETECTION RANGE PRESENCE ADJUSTABLE LUX - ADJUSTABLE LUX - PRESENCE TIME DELAY, STEPLESS AUTO BURN-IN OF FLUORESCENT - Yes Yes MANUAL POWER SWITCH AT-BB-IN-IQ AT-BB-IN-IQ AT-BB-IN-IQ PUSH BUTTON OR SHUTTER SWITCH DETECTION FLASHING LED WHEN AVAILABLE TO ORDER WITH HIGHER BOX FOR EXTERNAL INSTALLATION BOX FOR WALL INSTALLATION COLOUR Green Green Green DIMENSIONS (Diameter/depth mm) 184/22.5/ /22.5/ /22.5/20.5 PRODUCT WEIGHT (KG)

Wireless module relay wireless module for Vitesse modular quick connection system. The module creates a wireless extension to the modular quick connection system.

17 091 43 VITM6-ATMOD-DD-IQ Art. 760175 E no. 17 091 44 VITM6-ATMOD-AD-IQ Art. 760176 E no.

6 Wireless module relay wireless module for Vitesse modular quick connection system. The module creates a wireless extension to the modular quick connection system. As the sensor or sensors can be positioned anywhere and communicate wirelessly with the module relay, a high level of flexibility is created. VITM4-ATMOD-IQ Art E no VITM6-ATMOD-DD-IQ Art E no VITM6-ATMOD-AD-IQ Art E no VITM4-ATMOD-IQ, VITM6-ATMOD-DD-IQ, VITM6-ATMOD-AD-IQ Wireless communication with all other units Control 10 A load Programmable via programming handset VITM6-ATMOD-DD-IQ and VITM6-ATMOD-AD-IQ Channel 2 DSI/DALI or 1-10 V (VITM6-ATMOD-AD-IQ) Installation/assembly PRODUCT VITM4-ATMOD- IQ VITM6-ATMOD- DD-IQ SENSOR TYPE AN-10 AN-10 AN-10 VITM6-ATMOD- AD-IQ IP 40 IP 40 IP 40 CHANNEL 1 ON/OFF MAX. LOAD 10 A 10 A 10 A MAX. NO. OF BALLASTS if only channel 2 10 is used. (otherwise INTERNAL CONSUMPTION OFF INTERNAL CONSUMPTION ON NO CONTROL KNOB ON SENSOR WITH, USER Locked UHS4-IQ Locked UHS4-IQ Locked UHS4-IQ FULLY AUTOMATED ON/OFF SEMI-AUTOMATED MANUAL ON/ DETECTION RANGE PRES - ENCE ADJUSTABLE LUX - ADJUSTABLE LUX - PRESENCE TIME DELAY, STEPLESS AUTO BURN-IN OF FLUORESCENT MANUAL POWER SWITCH AT-BB-IN-IQ AT-BB-IN-IQ AT-BB-IN-IQ PUSH BUTTON OR SHUTTER SWITCH - Yes Yes DETECTION AVAILABLE TO ORDER WITH HIGHER BOX FOR EXTERNAL INSTALLATION BOX FOR WALL INSTALLATION COLOUR Green Green Green DIMENSIONS (Diameter/depth mm) 95/55 95/55 95/55 PRODUCT WEIGHT (KG)

7 Wireless switch module switch module. This module is used to connect switches to the system. The modules transmits signals to any sensor or relay in the system. The module has inputs for up to 7 push buttons. AT-BB-IN-IQ Art E no AT-BB-IN-IQ Placed in mounting box behind the switch. Inputs for up to 7 push buttons* Can be used with a push button and/or shutter switch Integrated battery that lasts up to 7 years of normal use. alternative to integrated battery is 12 V DC power supply. *Create a simple panel with separate push buttons for preset scenarios. E.g. Button 1: Field of play 100% Button 2: Field of play 75% Button 3: Stands 100% 50.1 Button 4: Stands 25% - Etc. up to 7 per module. Each button can be assigned a unique function or scenario Installation PRODUCT AT-BB-IN-IQ SENSOR TYPE AN-10 VOLTAGE 12 V DC / 50 ma / 600 mw (max) IP 40 CHANNEL 1 ON/OFF CHANNEL 2 DALI/DSI - CHANNEL V - CHANNEL WITH POTENTIAL-FREE - MAX. LOAD - MAX. NO. OF BALLASTS - INTERNAL CONSUMPTION OFF - INTERNAL CONSUMPTION ON - NO CONTROL KNOB ON SENSOR - BY, USER FULLY AUTOMATED ON/OFF - SEMI-AUTOMATED MANUAL ON/AUTO OFF DETECTION RANGE - PRESENCE - ADJUSTABLE LUX - - ADJUSTABLE LUX - PRESENCE - TIME DELAY, STEPLESS - CORRIDOR FUNCTION - Yes Locked UHS4-IQ AUTO BURN-IN OF FLUORESCENT - MANUAL POWER SWITCH Wireless PUSH BUTTON OR SHUTTER SWITCH PRESET LIGHTING SCENARIOS - DIMMER MEMORY (LAST MAN. - DETECTION - FLASHING LED WHEN AVAILABLE TO ORDER WITH HIGHER BOX FOR EXTERNAL INSTALLATION - BOX FOR WALL INSTALLATION - COLOUR - - Yes Yes - Green WARRANTY 3 years DIMENSIONS (Diameter/depth mm) 95/55 PRODUCT WEIGHT (KG) 0.1 RADIO FREQUENCY 868 MHz RADIO RANGE OUTDOOR/INDOOR 100/30 m

LRI1655, LLC1655 Datasheet ActiLume 1-10V System

LRI1655, LLC1655 Datasheet ActiLume 1-10V System 1/6 Product details The ActiLume 1-10 V luminaire-based sensor enables daylight regulation and dimming when no presence is detected. The delay time can be customized between 1 and 30 minutes. The ActiLume