RClamp2504P & RClamp3304P RailClamp 2.5V & 3.3V TVS Arrays
|
|
- Angelina Evans
- 5 years ago
- Views:
Transcription
1 - RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). The monolithic design incorporates surge rated, low capacitance steering diodes and a TS diode in a single package. Each line has a maximum capacitance of <.8pF to ground. The capacitance of each line is well matched for consistant signal balance. This device is optimized for ESD protection of portable electronics. It may be used to meet the ESD immunity requirements of IEC 6-4-2, Level 4 (±5k air, ±8k contact discharge). The RClamp TM 254P and RClamp TM 334P are constructed using Semtech s proprietary EPD process technology. The EPD process provides low standoff voltages with significant reductions in leakage current and capacitance over silicon-avalanche diode processes. They feature a true operating voltage of 2.5 volts and 3.3 volts for superior protection. These devices are in a 6-pin, RoHS/WEEE compliant, SLP66P6 package measuring.6 x.6 x.58mm. The leads are spaced at a pitch of.5mm and are finished with lead-free NiPdAu. RClamp254P & RClamp334P RailClamp 2.5 & 3.3 TS Arrays Features Transient protection for high-speed data lines to IEC (ESD) ±5k (air), ±8k (contact) IEC (EFT) 4A (5/5ns) Array of surge rated diodes with internal TS Diode Small package saves board space Protects up to four I/O lines Low capacitance (<.8pF) for high-speed interfaces Minimal insertion loss to 3.GHz Low operating voltage: 2.5 and 3.3 Low leakage current and clamping voltage Solid-state silicon-avalanche technology Mechanical Characteristics SLP66P6 package RoHS/WEEE Compliant Nominal Dimensions:.6 x.6 x.58 mm Lead Finish: NiPdAu Molding compound flammability rating: UL 94- Marking: Marking Code + Date Code Packaging: Tape and Reel per EIA 48 Applications Multi Media Card (MMC) Interfaces SATA Interfaces SD Card Interfaces SIM Ports MDDI Ports MPPI Ports Circuit Diagram Pin Configuration GND.58 SLP66P6 (Bottom iew) Nominal Dimensions in mm Revision 4/2/27
2 Absolute Maximum Rating Rating Symbol alue Units Peak Peak Pulse Power (tp = 8/2μs) Pulse Current (tp = 8/2μs) P pk 8 Watts I PP 5 A ESD per IEC (Air) ESD per IEC (Contact) ESD 2 2 k Operating Temperature T J -4 to +85 C Storage Temperature T STG 55 to +5 - C Electrical Characteristics (T=25 o C) RClamp254P Parameter Symbol Conditions Minimum Typical Maximum Units Reverse Stand-Off RWM Pin 3 to GND 2. 5 Punch-Through Snap-Back PT SB I PT I SB = 2μA 2. 7 = 5mA 2. Reverse Leakage Current I R RWM = 2.5, T=25 C. 5 μa Clamping C I PP = A, t = 8/2μs p 6. 5 Clamping C I PP = 5A, t = 8/2μs p 3 Junction Capacitance C j R =, f = MHz Any I/O pin to GND R =, f = MHz Between I/O pins.8 pf.4 pf 27 Semtech Corp. 2
3 RClamp334P Parameter Symbol Conditions Minimum Typical Maximum Units Reverse Stand-Off RWM Pin 3 to GND 3. 3 Punch-Through Snap-Back PT SB I PT I SB = 2μA 3. 5 = 5mA 2. 8 Reverse Leakage Current I R RWM = 3.3, T=25 C. 5 μa Clamping C I PP = A, t = 8/2μs p Any I/O GND Clamping C I PP = 5A, t = 8/2μs p Any I/O to GND Junction Capacitance C j R =, f = MHz Any I/O pin to GND R =, f = MHz Between I/O pins pf.4 pf 27 Semtech Corp. 3
4 Typical Characteristics Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve Peak Pulse Power - P PP (kw)... Pulse Duration - tp (us) % of Rated Power or IPP Ambient Temperature - T A ( o C) Pulse Waveform Junction Capacitance vs. Reverse Percent of I PP e -t td = I PP /2 Waveform Parameters: tr = 8µs td = 2µs Time (µs) C J ( R ) / C J ( R =) f = MHz Reverse - R () Clamping vs. Peak Pulse Current I/O to GND Clamping vs. Peak Pulse Current I/O to I/O 5 2 RClamp334P Clamping - C () 5 RClamp254P Waveform Parameters: tr = 8μs td = 2μs Clamping - C () 5 5 RClamp334P RClamp254P Waveform Parameters: tr = 8μs td = 2μs Peak Pulse Current - I PP (A) Peak Pulse Current - I PP (A) 27 Semtech Corp. 4
5 Typical Characteristics Insertion Loss S2 (I/O to Gnd) Analog Crosstalk CH S2 LOG 6 db / REF db : db 9 MHz CH S2 LOG 2 db / REF db db -6 db -2 db : db.8 GHz 3: -.63 db 2.5 GHz -8 db -24 db -3 db -36 db MHz MHz GHz 3 GHz START. 3 MHz STOP 3. MHz START. 3 MHz STOP 3. MHz ESD Response (8k Contact per IEC 6-4-2) 27 Semtech Corp. 5
6 Applications Information Device Connection for Protection of Four High-Speed Data Lines These devices are designed to protect low voltage data lines operating at 2.5 volts or 3.3 volts. When the voltage on the protected line exceeds the TS working voltage, the steering diodes are forward biased, conducting the transient current away from the sensitive circuitry, through the internal TS to ground. Data lines are connected at pins, 2, 5 and 6. The center pin should be connected directly to a ground plane. The path length is kept as short as possible to minimize parasitic inductance. For best results, multiple micro-vias connected to ground are recommended. Pins 3 and 4 are not connected. Note that pin 3 is connected internally to the cathode of the low voltage TS. However, due to the snapback characteristics of the EPD TS, this pin should not be directly connected to a DC supply voltage. Figure.. Pin Configuration (Top op Side iew) w) Pin 2 3 Gnd Identification, 2, 5, 6 Input/Output Lines 4 Not Connected 3 Center Tab 2.5 or 3.3 (Do not connect this pin to a DC supply) Ground Protection of Four Data Lines Gnd 27 Semtech Corp. 6
7 Typical Applications Gnd SIM Port - Protection of Three Data Lines and CC 27 Semtech Corp. 7
8 Applications Information - Spice Model RClamp254P Spice Model RClamp254P Spice Parameters Parameter IS B J RS IB CJO TT U nit D (LCRD) D 2 (LCRD) D3 (TS) Amp E-2 E-2 2.9E- 2 olt 2.88 olt Ohm Farad.3E-2.3E-2 63E-2 Amp E-3 E-3 E-3 sec 2.54E E E- 9 M N EG e Semtech Corp. 8
9 Applications Information - Spice Model RClamp334P Spice Model RClamp334P Spice Parameters Parameter IS B J RS IB CJO TT U nit D (LCRD) D 2 (LCRD) D3 (TS) Amp E-2 E-2 2.9E- 2 olt 3. 3 olt Ohm Farad.3E-2.3E-2 73E-2 Amp E-3 E-3 E-3 sec 2.54E E E- 9 M N EG e Semtech Corp. 9
10 Outline Drawing - SLP66P6 A D B PIN INDICATOR (LASER MARK) aaa C A2 E D 2 E A A C LxN E/2 SEATING PLANE DIMENSIONS INCHES MILLIMETERS DIM MIN NOM MAX MIN NOM MAX A A A2 (.6) (.5) b D D E E e.2 BSC.5 BSC L N 6 6 aaa.4.9 bbb.4.9 e N bxn bbb C A B D/2 NOTES:. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. Land Pattern - SLP66P6 Z G Y P X F (C) DIMENSIONS DIM INCHES MILLIMETERS B.5.3 C.6.52 P F G X Y Z B NOTES:. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET 27 Semtech Corp.
11 Marking Ordering Information 254P YW 334P YW Part Number RClamp254P.TCT RClamp334P.TCT Working Qty per Reel Reel Size 2.5 olts 3, 7 Inch 3.3 olts 3, 7 Inch YW = Date Code RClamp254P RClamp334P RailClamp and RClamp are marks of Semtech Corporation Tape and Reel Specification Device Orientation in Tape (Pin upper left towards sprocket holes) A B K.78 +/-.5 mm.78 +/-.5 mm.69 +/-.5 mm Tape Width B, (Max) D D E F K (MAX) P P P 2 T(MAX) W 8 mm 4.2 mm.5 +. mm -. mm ).5 mm ±.5.75±. mm 3.5±.5 mm 2.4 mm 4.±. mm 4.±. mm 2.±.5 mm.4 mm 8. mm +.3 mm -. mm Contact Information Semtech Corporation Protection Products Division 2 Flynn Rd., Camarillo, CA 932 Phone: (85)498-2 FAX (85) Semtech Corp.
RClamp0504PA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationRClamp0502A RailClamp Low Capacitance TVS Array
- RailClamp Description The RailClamp series consists of ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp0504S RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp1502B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationRClamp0501T. Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics.
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp0521PA. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp0522P RClamp0524P
PROTECTION PRODUCTS - RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp0502B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationRClamp0551P. Ultra-Low Capacitance 1-Line, 5V ESD protection. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp3374N. High Power TVS for Ethernet Interfaces. PRELIMINARY Features
PROTECTION PRODUCTS - RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage
More informationRClamp0504F RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp0504FA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp0524PA RClamp0522P
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationuclamp0801t Low Profile μclamp 1-Line ESD protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics Applications
- MicroClamp Description The μclamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
More informationRClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
More informationRClamp7528T. Ultra Low Capacitance TVS Array. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description. Mechanical Characteristics
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected
More informationuclamp2512t Lightning and ESD Protection for Gigabit Ethernet Interfaces PROTECTION PRODUCTS - MicroClamp Description Features
- MicroClamp Description The μclamp 5T TVS diode is specifically designed to meet the performance requirements of Gigabit Ethernet interfaces. They are designed to protect sensitive PHY chips from damage
More informationRClamp0582N RailClamp Low Capacitance TVS Diode Array
- Raillamp Description Raillamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationSMDA05C-7 THRU SMDA24C-7
Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge
More informationSDC36C. TVS Diode Array for Proximity Switch Input Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The is a highsurge transient voltage suppressor (TS) optimized for protection of sensitive digital sensors used in proximity switches and industrial control applications. The protects the components
More informationTClamp1202P. Low Capacitance TClamp Surge Protection for 12V Interfaces. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
TClamp122P Low Capacitance TClamp Surge Protection for 12V Interfaces PROTECTION PRODUCTS Description TClamp 122P provides dedicated surge and ESD protection for RS-485 and other 12V lines in industrial
More informationRClamp7522T. Ultra Low Capacitance TVS Array PRELIMINARY
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationEClamp2410P. ESD Protection Device for T-Flash/MicroSD Interfaces PRELIMINARY. PROTECTION PRODUCTS - EMIClamp TM Description.
- EMIClamp TM Description The EClamp TM 240P is a combination EMI fi lter and line termination device with integrated TVS diodes for use on Multimedia Card interfaces. This state-of-the-art device utilizes
More informationRClamp0554S RailClamp Low Capacitance TVS Diode Array
- RailClamp Description RailClamp is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical
More informationRClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
More informationRClamp0582B. Low Capacitance RClamp ESD and EOS Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
RClamp582B Low Capacitance RClamp ESD and EOS Protection PROTECTION PRODUCTS Description The RClamp 582B transient voltage suppressor is specifically designed to protect sensitive components which are
More informationSRV05-4 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationRClamp3324T PRELIMINARY. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics (T=25 o C Unless Otherwise Specified) I PP V R
- RailClamp Description The RClamp 3324T provides ESD protection for USB3., HDMI.3/.4, and other high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
More informationLCDA15C-6. Low Capacitance TVS Diode Array For Multi-mode Tranciever Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LCDA15C6 has been specifically designed to protect sensitive components which are connected to data and transmission lines from over voltages caused by electrostatic discharge (ESD), electrical
More informationRClamp0532T. Low Capacitance RailClamp 2-Line Surge and ESD Protection for Ethernet Interfaces. PROTECTION PRODUCTS Description.
PROTECTION PRODUCTS Description RClamp 53T is a high performance TVS array designed to protect two differential lines from overvoltage events caused by ESD, lightning, CDE (Cable Discharge Events) and
More informationFeatures. Applications
- MicroClamp Description The µclamp TM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
More informationHigh Power µclamp 3.3V ESD & Surge Protection
High Power µclamp 3.3V ESD & Surge Protection PROTECTION PRODUCTS Description µclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD.
More informationRClamp3324P. Low Capacitance RailClamp 4-Line Surge and ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Low Capacitance RailClamp 4-Line Surge and ESD Protection PROTECTION PRODUCTS Description RailClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage
More informationEClamp2455P. ESD/EMI Protection for SIM Card PRELIMINARY. PROTECTION PRODUCTS - EMIClamp TM Description. Features. Mechanical Characteristics
- EMIlamp TM Description The Elamp TM 2455P is combination EMI filter and line termination device with integrated TVS diodes for use on SIM ard interfaces on cellular phones and other portable electronics.
More informationRClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
More informationRClamp3331ZA. Ultra Small RailClamp 1-Line, 3.3V ESD Protection
- RailClamp Description RailClamp TVS diodes are ultra low capacitance devices designed to protect sensitive electronics from damage or latch-up due to ESD, EFT, and EOS. They are designed for use on high
More informationPESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationEClamp2422N. ESD/EMI Protection for Audio Interfaces PRELIMINARY
PROTETION PRODUTS - EMIlamp TM Description The Elamp TM 2422N is a (-L-) low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI signals and provide electrostatic
More information0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationRClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
More information0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationFeatures. Applications
Description are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data and transmission
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationWS05R. Features SOT-143. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) Pin 4. Pin 3. Pin 2. Pin 1 SOT-143 (Top View)
Document: W, Rev: C Transient Voltage Suppressor Features 5 Watts Peak Power per Line (tp = 8/μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationuclamp0511z Ultra Small μclamp 1-Line ESD protection PROTECTION PRODUCTS - Z-Pak TM Description Features Mechanical Characteristics Applications
- Z-Pak TM Description μclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace 020 size multilayer varistors (MLVs) in portable applications
More informationWE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) SOT-143 (Top View) Document: W , Rev: A
Document: W0005, Rev: A Transient Voltage Suppressor Features 00Watts Peak Power per Line (tp = 8/0μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationSTF701. T-Filter with TVS Diode Array For EMI Filtering and ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The STF701 is a low pass T-filter with integrated TVS diodes. It is designed to provide bi-directional filtering of unwanted EMI/RFI signals and electrostatic discharge (ESD) protection in
More informationSMDA05C THRU SMDA24C. Bidirectional TVS Array for Protection of Four Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SMDxxC series of TS arrays are designed to provide bidirectional protection for sensitive electronics from damage or latchup due to ESD, lightning and other voltageinduced transient events.
More informationUM5204EECE. Quad Channel Low Capacitance ESD Protection Array. General Description. Rev.03 Dec /6
Quad Channel Low Capacitance ESD Protection Array TSOP-/SOT3- General Description is surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed
More informationUM5204EEBF. Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EEBF SC89-6/SOT563/SOT666 UM5204EECF TSOP-6/SOT23-6 General Description are surge rated diode arrays designed to protect
More informationSLVU WATT ULTRA LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT ULTRA LOW CAPACITANCE TVS ARRAY Description The is a low voltage, low leakage current and ultra low capacitance TVS device designed for EOS and ESD protection of low voltage circuits commonly
More informationUM5304EEBF. Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EEBF SC89-6/SOT563/SOT666 UM5304EECF TSOP-6/SOT23-6 General Description UM5304EEXF are surge rated diode arrays designed
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationµclamp3321za Ultra Small µclamp 1-Line, 3.3V ESD Protection PROTECTION PRODUCTS - µclamp Description Features Mechanical Characteristics Applications
- µclamp Description µclamp TVS diodes are designed to protect sensitive electronics from damage or latc-up due to ESD. Tey are designed to replace 1 size multilayer varistors (MLVs) in portable applications
More informationCDMSP M Surface Mount TVS Diode Array
*RoHS COMPLIANT Features RoHS compliant* Protects four I/O lines Ultra-low capacitance ~.55 pf ESD protection > kv Surge protection Applications High Definition Multimedia Interface (HDMI) Digital Visual
More informationSRV05-4. ultra low capacitance steering diode/tvs array. Description. sot-23-6 package. applications
ultra low capacitance steering diode/tvs array Description The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationPLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
More informationAZC002-02N Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 2 high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) (5/50ns) Level-3, 20A for I/O, 40A for
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationIEC (EFT) 40A
Features ESD Protect for high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4- (ESD) ±1kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (/0ns) IEC 61000-4- (Lightning) 1A (8/0µs)
More informationPSOT03LC - PSOT36LC 500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection
More informationAZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for Line with Bi-directional. Provide ESD protection for the protected line to IEC 6000-4- (ESD) ±0kV (air), ±kv (contact) IEC 6000-4-4 (EFT) 40A (5/50ns) IEC 6000-4-5 (Lightning)
More informationSM05G. Low Capacitance Quad Line ESD Protection Diode Arry SM05/G SOT23-3. General Description. Rev.02 Nov.
Low Capacitance Quad Line ESD Protection Diode Arry SOT23-3 General Description The of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission
More informationWE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) Pin 4. Pin 3. Pin 2. Pin 1 SOT-143 (Top View) Document: W , Rev: B
Document: W5, Rev: B Transient Voltage Suppressor Features Watts Peak Power per Line (tp = 8/μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationSP2574NUTG 2.5V 40A Diode Array
TVS Diode Arrays (SPA Diodes 2.5V 40A Diode Array RoHS Pb GREEN Description The is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge, CDE (cable discharge
More informationCitrusCom CS0801S. Applications. Features. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 61000-4-2 (ESD) ±15kV (Air) ±8kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50 ns) Cable Discharge Event (CDE) Package optimized for high-speed lines
More informationDescription Mechanical Characteristics Features Applications Ordering Information Part Number Packaging Reel Size
ST36D4 -Line Bi-directional TVS Diode Description The ST36D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationAZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for 1 Line with Bi-directional. Provide ESD protection for the protected line to IEC 61000-4- (ESD) ±16kV (air), ±16kV (contact) IEC 61000-4-4 (EFT) 50A (5/50ns) IEC 61000-4-5 (Lightning)
More informationUM5075/5079 Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN General Description Applications Features
General Description Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN2 1.0 0.6 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as
More informationST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
More informationSFC05-4 ChipClamp ΤΜ Flip Chip TVS Diode Array PRELIMINARY Features
Description The SFC05-4 is a quad flip chip TVS array. They are state-of-the-art devices that utilize solid-state siliconavalanche technology for superior clamping performance and DC electrical characteristics.
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s component is surge rated diode array designed to protect high speed data line interfaces. It has been specifically
More informationAOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning. This device
More informationESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
More informationPLCDA03C-6 - PLCDA15C-6
5 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The PLCDAxxC-6 Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and
More informationUESD6V8L1F. Low Capacitance Single Line ESD Protection Diode Array UESD6V8L1F DFN General Description
Low Capacitance Single Line ESD Protection Diode Array DFN2 1.0 0.6 General Description The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell
More informationPMMAD Series ULTRA LOW CAPACITANCE MULTI-LINE STEERING DIODE ARRAY DESCRIPTION SO-14 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE MULTI-LINE STEERING DIODE ARRAY DESCRIPTION The are a low distortion steering diodes. These devices are intended for use in high frequency analog or digital data I/O ports for protection
More informationWS05-4RUL SOT-23-6L. Features IEC COMPATIBILITY (EN ) Transient Voltage Suppressor. SOT-23-6L (Top View) Document: W , Rev: D
Document: W34, Rev: D Transient Voltage Suppressor Features Solid-state silicon-avalanche technology 4Watts Peak Pulse Power per Line (t p =8/μs) Low operating and clamping voltage Up to four I/O Lines
More informationSRV05-4 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SDT23CXXL02 series are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage
More informationCitrusCom CS Applications. Features. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 61000-4-2 (ESD) ±30kV (Air) ±30kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50 ns) IEC 61000-4-5 (Surge) 10A (8/20μs) Package optimized for high-speed
More informationSRV25-4LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationSingle Line ESD Protection Diode Array
General Description Single Line ESD Protection Diode Array SOD523 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,
More informationAZC002-04S Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
More informationLCD05C - LCD24C HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION 16 PIN DIP PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION The LCD Series are high powered multi-line TVS arrays available in a 16 pin DIP package. This series is designed to protect high-speed applications from the
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The series of is designed to protect power port and the chip Vbus interfaces. It has been specifically designed to protect sensitive
More informationAZC099-04S 4 IEC (ESD)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
More informationCP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
More informationPMAD Series. High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet 10/100 Base T Computer I/O Ports
ultra low capacitance multi-line steering diode array Description The are a low distortion steering diodes. These devices are intended for use in high frequency analog or digital data I/O ports for protection
More informationAOZ8234. Four-line TVS Diode
AOZ8 Four-line TS Diode General Description The AOZ8 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and ESD. This state-of-the-art device utilizes
More informationLow-Capacitance Bidirectional Micro Packaged TVS Diodes for ESD Protection
ESD5B5CL Low-Capacitance Bidirectional Micro Packaged TVS Diodes for ESD Protection The ESD5B5CL is designed with Leiditech Punch-Through process TVS technology to protect voltage sensitive components
More informationPSM WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR PIN CONFIGURATION
600 WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR Description The is an asymmetrical transient voltage suppressor (TVS) array, designed specifically for RS-485 applications. This device provides protection
More informationAOZ8102. Ultra-Low Capacitance TVS Diode Array. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from SD and lightning. This device incorporates eight surge
More informationAQ24CANFD 200W TVS Diode Array
AQ24CANFD 200W TVS Diode Array RoHS Pb GREEN Description The AQ24CANFD is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD, electrical fast
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
More informationLow Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN
General Description UM5080T Low Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN2 1.0 0.6 The UM5080T TVS protection diode is designed to replace multilayer varistors (MLVs) in portable
More information