SYSTIMAX InstaPATCH Plus Connectivity System Solution Guide

Transcription

1 SYSTIMAX InstaPATH Plus onnectivity System Solution Guide

2 Enterprises are faced with a growing need for higher bandwidth coupled with high flexibility in their infrastructures to support such applications as Storage Area Networks, Network Attached Storage, and high performance computing. Data enters (Ds), in particular, are an important application for high performance connectivity. Organizations are building Ds to offer high performance server hosting, data storage and secure, redundant business backup. These centers are devoted to providing a secure and reliable environment for large numbers of application servers and storage devices. With extreme service reliability being a trademark of these installations, Ds must be addressed with high quality cabling solutions that allow highdensity and ease of use and deployment. Infrastructure solutions must allow for: Operational reliability Quick changes, including additions and rapid expansion High performance with migration path to future technologies Highdensity ost effective deployment and installation When evaluating cost effectiveness of solutions, always think in terms of cost over the life of the infrastructure, rather than only the initial installation cost. The lowest product cost is not always the most effective solution in the long run. hoose the right system the first time. Data center considerations should include the following: Initial installation cost: ensuring it covers adequately the specification to avoid unwanted extras and performance restrictions Administration: the network s ability to be easily and inexpensively reconfigured uture: the ability to support ever increasing bandwidth and data rates in the future Maintenance: the effort required to keep the system operating Life cycle value: the assurance of a warranty covering the applications and hardware

3 SYSTIMAX InstaPATH Plus onnectivity System Solution Guide ommscope, through its SYSTIMAX brand, has pioneered the development of intelligent data center solutions that offer realtime efficiencies, positively impacting network security, IT productivity and ultimately, business success. y implementing these intelligent solutions, enterprises can increase network uptime, improve infrastructure management and monitor network connections, allowing enterprises to more efficiently manage and safeguard its most valuable asset information. The drivers for data center fiber optic connectivity include: A need to efficiently migrate to speeds above 1 Gb/s and 10 Gb/s A need to quickly and easily configure work group networks (especially in data centers) A need to most efficiently support multiple connectivity technologies (Singlemode/Multimode, L/S/ST) High security, high electromagnetic field, high lightning strike, or corrosive environments High density, installationtime sensitive environments Large, overcrowded cabinets and racks A need to increase control over network operations A need to reduce recurring operational costs The Solution to Data enter Optical Infrastructure Needs ommscope, through its SYSTIMAX brand, brings the ultimate in fiber optic technology to the Enterprise customer. ommscope s 0year heritage in fiber optic solutions enables us to deliver a complete portfolio of products for the physical layer of the network. ommscope supports the deployment of multimode and/or singlemode fiber in the backbone segments of data centers, with it s TeraSPEED ZWP singlemode LazrSPEED laseroptimized multimode and OptiSPEED multimode solutions. SYSTIMAX InstaPATH Plus iber System The SYSTIMAX InstaPATH Plus System features a high density, factory terminated, factory tested, modular fiber connectivity solution that allows installers to simply and quickly connect system components together. This modular system approach enables up to 96 fibers to be ready for service in the time it takes to make a single fiber connection with traditional systems. Developed by ommscope Labs, the InstaPATH Plus System is designed to support locations, such as data centers, that require highdensity, rapid deployment and high performance. The InstaPATH Plus System incorporates SYSTIMAX LazrSPEED multimode, OptiSPEED multimode and TeraSPEED singlemode fiber technologies to support today s most demanding applications, while allowing easy migration to the next generation technology. The InstaPATH Plus System includes preterminated hardware, preterminated backbone trunk cables, ruggedized MPOsingle fiber fanout patch cords, array cords and standard fiber patch cords. The InstaPATH Plus System utilizes one common module, one common rugged fanout, one common array cord and standard fiber patch cords, and retains the full benefits of easy installation and system administration, while maintaining a future upgrade path to parallel connectivity. No special polarity components are required. Moreover, the InstaPATH Plus System features an improved labeling system that is accurate and logical when positioned in four orientations, affording more flexibility in design, installation, and application. The InstaPATH Plus preterminated hardware is offered in two configurations. The highdensity series features preterminated 96 L, L and S modules with up to twice the density of traditional modules. Highdensity modules can be mounted into G 1U shelves which provide slack storage for trunk cable and cable entry features for strain relief. The modular series features interchangeable and 1fiber L, and 1fiber S and ST modules in two distinct mounting arrangements to provide design and service flexibility. Preterminated with MPO connectors and offered in customerspecified lengths, the InstaPATH Plus backbone trunk cables are offered in 1,,, 7, 96, and 1fibers. Solutions supported: LazrSPEED 0 LazrSPEED 300 LazrSPEED 10 OptiSPEED TeraSPEED HighDensity L Module Modular Shelf InstaPATH Plus Module Male MPO (pinned) and emale MPO (no pins) onnectors

4 SYSTIMAX InstaPATH Plus onnectivity System Solution Guide InstaPATH Plus System Selection Guide eatures and enefits Supports LazrSPEED applications up to 0 meters, and TeraSPEED applications beyond 60% increase in bandwidth due to Zero Water Peak in the Eband (100 nm window) in singlemode applications Singlemode components capable of supporting data and video applications. All modules are based on LazrSPEED 300 or TeraSPEED fibers to provide headroom for future system upgrades actory terminated and tested cable and apparatus for instant field connections with guaranteed quality and performance 1fiber MPO connector based modular design enables simple connections Up to 96% savings in installation time for 96 L connections Up to 0% savings in space due to the increased density Designed for administrative convenience guaranteed transmittoreceive connectivity No special polarity components single module design, standard patch cords Easy upgrade path to parallel connectivity and associated applications Supports easy reconfiguration for moves, adds and changes Improved fiber patch cord management and improved labeling capabilities Automatic shutter for L adapters Developed by ommscope Labs and backed by the bestinindustry SYSTIMAX warranty Provides opportunities for lower total installed system cost (material plus labor) The SYSTIMAX InstaPATH Plus System is designed to simplify the selection, design and deployment of the fiber optic infrastructures required in data center environments. To optimize product selection, consider the following project requirements, then follow the simple 13 steps to determine the system that fits your needs. To determine which of the SYSTIMAX InstaPATH Plus Systems is best for you, the following requirements should be considered: The cabling architectures that are commonly used for data center structured cabling systems, require a mix of highdensity, high reliability, high performance, with flexible design guidelines, speed of installation, futureready and easy to use. The following must be considered and prioritized: The sophistication of the network applications The kind of traffic expected on the various portions of the data center network based on number of users, data transfer requirements of each user, LAN architecture, etc. The life expectancy of the network and cabling infrastructure The frequency of moves and changes The growth potential of the network over its expected life Any adverse physical conditions in the customer s data center Any access restrictions whether physical or time related The design, architecture and specification of the fiber optic infrastructure should include the following: Outlet density and presentation required Resilience Patch/jumper density Wiring closet/space requirements Media selection singlemode and/or multimode Media considerations performance, physical hazards Manufacturer s support and warranty able containment including containment types (trunking, ducts, cable tray), and containment design (size, safety, segregation) Installation techniques and quality Adherence to standards Labeling, records and documentation Testing and certification Maintenance and services

5 onfiguration as easy as 13 The steps on the following pages have been designed to guide you to the appropriate product selection Step 1 Select modules and/or shelf type Step Select preterminated trunk cables Step 3 Select the equipment cables InstaPATH Plus System ront View InstaPATH Plus System Rear View

6 SYSTIMAX InstaPATH Plus onnectivity System Solution Guide STEP 1 SELET INSTAPATH PLUS MODULES AND/OR SHEL TYPE The tables below show the capacity for each InstaPATH Plus shelf type based on connector selection and height option. Select shelf type based modular or highdensity capacity and select appropriate number of modules MODULAR SERIES DM L Modules actory terminated Module Ordering Information Material ID Description Product ode , L LazrSPEED Multimode Module DMLLS 76001, L OptiSPEED Multimode Module DMLMM , L TeraSPEED Singlemode Module DMLSM , L LazrSPEED Multimode Module DM1LLS , L OptiSPEED Multimode Module DM1LMM , L TeraSPEED Singlemode Module DM1LSM , S LazrSPEED Multimode Module DM1SLS , S OptiSPEED Multimode Module DM1SMM , S TeraSPEED Singlemode Module DM1SSM , ST LazrSPEED Multimode Module DM1STLS , ST OptiSPEED Multimode Module DM1STMM , ST TeraSPEED Singlemode Module DM1STSM MPO Adapter Panel DPMPO MPO Adapter Panel DP6MPO MPO Adapter Panel DPMPO * lank Panel for InstaPATH Panels/Shelves, 6/pk lank Panel *L LazrSPEED and TeraSPEED DM modules also available in 6 packs. ontact your local ommscope representative for ordering information. Modular Shelf Series G U Shelf MP1U Panel onnection Type 1U Modular Panel/Shelf Installation Type U U Modular Shelf Modular Shelf L 7 1 S ST Ordering Information Material ID Description Product ode U Modular Panel, Supports 3 DM Modules (not included) MP1U U Modular Shelf, Sliding, Supports 3 DM Modules (not included) 600G1UIPSD U Modular Shelf, ixed, Supports 3 DM Modules (not included) 600G1UIPX U Modular Shelf, Internal Sliding, Supports 3 DM Modules (not included) 600G1UIPIS U Modular Shelf, Sliding, Supports 6 DM Modules (not included) 600GUIPSD U Modular Shelf, Sliding, Supports 1 DM Modules (not included) 1000GUIPSD U Modular Shelf, ixed, Supports 1 DM Modules (not included) 1000GUIPX HIGHDENSITY SERIES High Density Series Installation onnection Maximum Type Type apacity HighDensity Module L 96 S SYSTIMAX InstaPATH Plus LazrSPEED 96 L High Density Module Ordering Information Material ID Description Product ode L, LazrSPEED Mulitmode, High Density Module DM96LLS L, OptiSPEED Mulitmode, High Density Module DM96LMM L, TeraSPEED Singlemode, High Density Module DM96LSM L, LazrSPEED Mulitmode, High Density Module DMLLS L, OptiSPEED Mulitmode, High Density Module DMLMM L, TeraSPEED Singlemode, High Density Module DMLSM S, LazrSPEED Mulitmode, High Density Module DMSLS S, OptiSPEED Mulitmode, High Density Module DMSMM S, TeraSPEED Singlemode, High Density Module DMSSM G1UUPX, ixed Shelf, Supports 1 HD Module 600G1UUPX G1UUPSD, Sliding Shelf, Supports 1 HD Module 600G1UUPSD

7 SYSTIMAX InstaPATH Plus onnectivity System Solution Guide STEP 1 SELET INSTAPATH PLUS MODULES AND/OR SHEL TYPE ONTINUED ADDITIONAL HOUSING OPTIONS Material ID Description UMA Universal Mounting racket Kit, accepts up to 3 modules InstaPATH Plus Inline Adapter Housing MPO(f)MPO(m) STEP SELET PRETERMINATED TRUNK ALES Select appropriate cable code from ordering information tables based on cable preference, and specify customized cables code including length as per cable configurator. The InstaPATHIPD trunk cables The InstaPATHIPD trunk cables feature a round cable construction which eliminates bend sensitivity allowing for easy routing and are offered in 1,,, 7, 96 and 1fibers. The cables are constructed with multiple subunits, each with 1 fibers and are terminated on both ends with MPO connectors. All IPD cables can be ordered with or without a pulling grip and with or without a cable gland. Preterminated Trunk ables Position 1 P 3 A D 11 E G 117 H iber Patch able iber Type H LazrSPEED 10 Multimode Z LazrSPEED 300 Multimode X LazrSPEED 0 Multimode M OptiSPEED Multimode W TeraSPEED Singlemode Termination End One MP MPO emale (no pins) Termination End Two MP MPO (female) ordage Size 6 multifiber subunit loose tube cable (IPD) Number of Ends J 1 iber IPD D iber IPD K 36 iber IPD E iber IPD 7 iber IPD G 96 iber IPD H 1 iber IPD Jacket Type P Plenum (Std olor) E Plenum, with grip G Plenum, armored W Plenum, with grip and armored J Plenum No able Gland H LSZH* Q LSZH, armored with grip* S LSZH, armored D LSZH, with grip* V LSZH No able Gland* *LSZH not available in North America UOM oot M Meter Length 001 xxx Position Trunk Extensions 1 P 3 A D 11 E G 117 H iber Patch able *LSZH not available in North America iber Type Z LazrSPEED 300 Multimode X LazrSPEED 0 Multimode M OptiSPEED Multimode W TeraSPEED Singlemode Termination End One MP MPO emale (no pins) Termination End Two MX MPO (male) ordage Size 6 multifiber subunit loost tube cable (IPD) Number of Ends J 1 iber IPD D iber IPD E iber IPD 7 iber IPD Jacket Type P Plenum (Std olor) E Plenum, with grip J Plenum No able Gland H LSZH* D LSZH, with grip* V LSZH No able Gland* UOM oot M Meter Length 001 xxx

8 SYSTIMAX InstaPATH Plus onnectivity System Solution Guide STEP 3 SELET THE EQUIPMENT ALES Select fanout cables and/or cords to connect to equipment or for crossconnect InstaPATH Plus Ruggedized anout ables The InstaPATH Plus ruggedized fanout cables support the direct connection to the equipment from the patch panel. Terminated with MPO connectors on one end and clipped duplex connectors (L, S or ST) on the other end, the ruggedized fanout cables are available in 1,, and 7 fiber counts. emale MPO (MP no pins) fanouts are utilized for connections to equipment from a DM module. Male MPO (MX pinned) fanouts are utilized for connections to equipment directly from a trunk cable. Ruggedized anout ables Position 1 3 P A D 11 E G 117 H iber Patch able iber Type Z LazrSPEED 300 Multimode X LazrSPEED 0 Multimode M OptiSPEED Multimode W TeraSPEED Singlemode Termination End One MP MPO emale (no pins) MX MPO Male (pins) L L S S ST STII Termination End Two L L S S ST STII ordage Size G Multi anout ables oot reakout Y Multi anout ables oot reakout X Multi anout ables foot reakout Number of Ends J 1 iber IPD D iber IPD K 36 iber IPD E iber IPD 7 iber IPD Jacket Type P Plenum (Std olor) H LSZH UOM oot M Meter Length 001 xxx Array ords Array cords can be terminated with either MPO connectors on both ends or MPO connectors on one end and clipped duplex connectors (L, S, ST) on the other end. Different from ruggedized fanouts which include an outer sheath to protect the fiber on longer runs between racks, array cords utilize 3.0 mm 1 fiber IPD cordage that is protected with aramid yarn for durability and allowing maximum flexibility within a rack/cabinet. MPO to MPO array cords are used for trunk extension, crossconnect applications or patching into parallel transceivers or array equipment. Array cords with MPO to duplex connectors (L, S, ST) are used for directly connecting equipment to a trunk. Position InstaPATH Plus Array ord onfigurator 1 3 P A D 11 E G 117 H iber Patch ord Termination End One MP MPO emale (no pins) MX MPO Male (pins) ordage Size S Array Patch ord E Array Patch od 96 inch reakout K Array Patch ord inch reakout Jacket Type P Plenum (Std olor) Length 001 xxx iber Type Z LazrSPEED 300 Multimode X LazrSPEED 0 Multimode M OptiSPEED Multimode W TeraSPEED Singlemode Termination End Two MP MPO emale MX MPO Male L L S S ST STII iber ount J 1 iber IPD Unit of Measure oot M Meter

9 SYSTIMAX InstaPATH Plus onnectivity System Solution Guide STEP 3 SELET THE EQUIPMENT ALES ONTINUED The InstaPATHIPD trunk cables The InstaPATHIPD trunk cables feature a round cable construction which eliminates bend sensitivity allowing for easy routing and are offered in 1,,, 7, 96 and 1fibers. The cables are constructed with multiple subunits, each with 1 fibers and are terminated on both ends with MPO connectors. All IPD cables can be ordered with or without a pulling grip and with or without a cable gland. Position Patch ord ables 1 P 3 A D 11 E G 117 H iber Patch able Termination End One MP MPO emale (no pins) MX MPO Male (pins) ordage Size 1.6 mm ord mm ord Jacket Type R Riser (Std olor) P Plenum (Std olor) Length 001 xxx iber Type X LazrSPEED Multimode W TeraSPEED Singlemode M OptiSPEED Multimode Termination End Two L L S S ST ST Number of Ends 1 Simplex Duplex UOM oot M Meter Pulling Grips Standalone pulling grip kits are also offered in four different sizes: one for 1 fibers, one for fibers, one for and 7 fibers, one for 96 and 1 fibers. The installer can order one pulling grip kit for every or 10 cables instead of ordering all trunk cables with pulling grips installed. ORDERING INORMATION Material ID Description olors InstaPATH Plus Pulling Grip Kit, 1 iber, black label InstaPATH Plus Pulling Grip Kit, iber, gray label InstaPATH Plus Pulling Grip Kit, /7 iber, blue label InstaPATH Plus Pulling Grip Kit, 96/1 iber, green label

10 SYSTIMAX InstaPATH Plus onnectivity System Solution Guide Typical Data enter InstaPATH Trunk Extensions InstaPATH Plus Trunk ables InstaPATH Plus Ruggedized anout ables InstaPATH Plus Modules SYSTIMAX Solutions Provides a omplete iber onnectivity Solution for Enterprise Regardless of whether you choose to install multimode, singlemode, indoor, outdoor, indoor/outdoor, ST/S/L, field or preterminated, SYSTIMAX iber onnectivity Solutions provides the complete product solution to meet even the most stringent of application requirements in the enterprise environment. The SYSTIMAX iber Solution family includes a wide choice of cables, connectors, splices, patch panels and patch cords. The best components engineered together to maximize performance thus providing customers with a single source endtoend "system solution", that means a single accountable point of contact for cabling system issues. All the approved SYSTIMAX products meet or exceed industry standards. With SYSTIMAX Solutions you can feel confident that you have made the right choice. 009 ommscope, Inc. All rights reserved. Visit our Web site at or contact your local ommscope representative or usinesspartner for more information. All trademarks identified by or are registered trademarks or trademarks, respectively, of ommscope. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to SYSTIMAX products or services. 07/09 MI61