ISO 16757: Data structures for electronic product catalogues for building services
|
|
- Hector Berry
- 5 years ago
- Views:
Transcription
1 VDI-Gesellschaft Bauen und Gebäudetechnik Overciew of ISO WG 11 meeting Toronto Manfred Pikart VDI TACOS GmbH, Münster Wolfgang Wilkes FernUniversität Hagen
2 Problem to be solved by ISO The performance and efficiency of a building services system depends on how good the components fit to the system The behaviour of a product depends on the characteristics of system into which it is installed The suitability of a product for a given system can only be analysed by simulating the whole system 2
3 Characteristics of building services catalogs Detailed technical data is required Technical properties Dynamic properties Big number of variants in catalogues Products are not listed one by one Rather: property value combination of products are described by rules (selection / configuration process) High scalability of geometry required Specific geometric forms which cannot be easily constructed from the IFC primitives 3
4 Dynamic Properties The value of a dynamic property Depends of context conditions outside of the product Can therefore not represented as a simple value in the catalogue Is represented in data sheets often as set of function curves A dynamic property Is defined in a product group standard as dependent of other properties that describe the system state (system properties) Is transferred in the catalogue as implemtentation code of a function Gets its actual value only in the application system which has to execute the function code 4
5 Dynamic properties 5
6 Selection process Selection properties are used to identify a product in a catalogue Selection properties are organised in a hierarchy Configuration function checks the validity of a given selection of properties Hierarchy and the configuration function guide the configuration process to identify the product 6
7 Geometric elements ISO 16757: Oval duct bend: plane, cylindric and toroidal surfaces Number of parameters: 7 (incl. wall-thickness) 7
8 Geometric elements ISO 16757: Oval duct bend: some parametric variants 8
9 Geometric elements For building services components catalogues parametric geometry is essential. Building services components have a number of specific forms which are difficult to model based on IFC primitives. ISO adds geometric primitives to those provided by STEP and IFC. 9
10 Catalogs and models Meta model Property definition level PG model 3 PG model 2 Common model PG model 1 (Radiator) XSD Catalog 1 Catalog 2 Catalog 3 Catalog 4
11 Catalogs and models bsdd Meta model Property definition level PG model 3 PG model 2 Common model PG model 1 (Radiator) XSD Catalog 1 Catalog 2 Catalog 3 Catalog 4
12 Organisation of the ISO series Part 1: Concepts, architecture and model This part gives the overview about the standard and the rationale for its elements and organisation. Part 2: Geometry This part defines the geometric elements which are used to represent the products in ISO catalogues. Part 3: Script language and functions This part defines the script language used in ISO for various purposes. Part 4: Cooperation with building information modelling standards This part contains IDM descriptions for ISO 16757, including process descriptions for those processes which are to be supported by the standard and it comprises the rules for mapping of product properties and the property descriptions to IFC and for defining properties semantically with IFD. Part 5: Product catalogue exchange format This part defines an exchange format in XML by which electronic catalogues can be exchanged according to the definitions of ISO The exchange format will be specified as an XML Schema Definition (XSD). Part 10 - XX Product group specific parts of ISO will define standardized properties for the product groups and the composition of the technical data model. Furthermore they determine the specific programming function- interfaces to layout, calculate and simulate the products.
13 Eclass import into bsdd (bsdd pilot project) Classification system used in some European countries Covers various product areas guage=en Is used heavily in German product exchange catalogues and by marketplaces Some segments of are now imported into the test database Using Catenda s mechanism to import a classification via an Excel-file into the bsdd Will be extended by German language
Status of ISO ISO TC 59/SC 13/WG 11
Status of ISO 16757 ISO TC 59/SC 13/WG 11 Product data for building services system models Wolfgang Wilkes Manfred Pikart bsi meeting Stockholm March 2014 Standards in the ISO 16757 series Title of series:
More informationProduct Library and ISO 16757
Product Library and ISO 16757 Wolfgang Wilkes Bjørn Stangeland Manfred Pikart 1 Building information modelling and catalogues Building Owner s Data : Requirements, Restrictions... Manufacturer s Data:
More informationData structures for electronic product catalogues for building services. Part 2: Geometry
INTERNATIONAL STANDARD ISO 16757-2 First edition 2016-11-15 Data structures for electronic product catalogues for building services Part 2: Geometry Structures de données pour catalogues électroniques
More informationISO Exchanging Building Services Product Information
ISO 16757 Exchanging Building Services Product Information 2012 10 18 Tokyo Dr. Wolfgang Wilkes University of Hagen D-58084 Hagen Germany 2012-10-18 Tokyo Dr. Wolfgang Wilkes Page 1 Basic purpose of ISO
More informationProduct Libraries in Ifc format. Open access to product information throughout a buildings lifecycle
Product Libraries in Ifc format Open access to product information throughout a buildings lifecycle Prepared by Bjørn K Stangeland for the buiildingsmart conference in Oslo, March 2012 Requirements for
More informationMERCI: Standards based exchange of component information to support e-business applications
MERCI: Standards based exchange of component information to support e-business applications Wolfgang Wilkes University of Hagen, Germany wo/{f,:ang. wilkes@fernuni-hagen.de Abstract: Product developers
More informationProduct Libraries in Ifc format. Open access to product information throughout a buildings lifecycle
Product Libraries in Ifc format Open access to product information throughout a buildings lifecycle Prepared by Bjørn K Stangeland for the buiildingsmart conference in Tokyo, October 2012 Requirements
More informationImplementers Agreement: Product Libraries in Ifc format
Waltham, 13 th March 2013 Implementers Agreement: Product Libraries in Ifc format Ifc Product Libraries containing one or more products with properties and geometry Proposal By: Bjørn K Stangeland, Data
More informationDRV GlobalTypes and DRV Request Interface. DRV Data Standard
D R V G E R M A N T R AV E L A S S O C I AT I O N DRV GlobalTypes and DRV Request Interface DRV Data Standard Table of Contents 1. Why does the industry need a new data standard?... 2 2. DRV GlobalTypes...
More informationJochen Garcke, Mandar Pathare, and Nikhil Prabakaran
ModelCompare Jochen Garcke, Mandar Pathare, and Nikhil Prabakaran Abstract ModelCompare is a plugin for post-processing software, which provides a seamless interface to compare two similarly discretized
More informationInteroperability: Advantages, Problems and Solutions
Fakultät Informatik Institut für Angewandte Informatik, Professur Technische Informationssysteme Interoperability: Advantages, Problems and Solutions Prof. Dr.-Ing. habil. Klaus Kabitzsch Dresden, 2018-05-29
More informationAn Overview of BuildingSMART. Christopher Groome Secretary buildingsmart International Moscow June 2016
An Overview of BuildingSMART Christopher Groome Secretary buildingsmart International Moscow June 2016 buildingsmart today Values Open Neutral Not-for-profit International Goals Create open BIM standards
More informationICT-Platform for Object Oriented Knowledge in the Building and Construction Industry
ICT-Platform for Object Oriented Knowledge in the Building and Construction Industry Author: Håvard Bell Co-authors: Lars Bjørkhaug, Jon Rønning Organisation: Norwegian Building Research Institute 1 ABSTRACT
More informationIntroduction to Information Systems
Table of Contents 1... 2 1.1 Introduction... 2 1.2 Architecture of Information systems... 2 1.3 Classification of Data Models... 4 1.4 Relational Data Model (Overview)... 8 1.5 Conclusion... 12 1 1.1 Introduction
More informationSmart Open Services for European Patients. Work Package 3.5 Semantic Services Definition Appendix E - Ontology Specifications
24Am Smart Open Services for European Patients Open ehealth initiative for a European large scale pilot of Patient Summary and Electronic Prescription Work Package 3.5 Semantic Services Definition Appendix
More informationInformation Model Architecture. Version 1.0
Information Model Architecture Version 1.0 1 introduction...2 2 objective...2 3 definition of terms...3 4 conformance...4 4.1 UBL conformance...4 4.2 NES conformance...4 4.3 NES profile conformance...4
More informationVDI 3805 Processes to describe as IDM
Processes to describe as IDM 1. What are the Processes initiated by? The Information Delivery Manual (IDM) aims to provide an integrated reference for processes and data required by BIM. It identifies
More informationThe new Schmersal online catalogue. Quick start guide and the new functions at a glance.
The new Schmersal online catalogue Quick start guide and the new functions at a glance. Re_Onlinekat_uk (2).doc V.1.0 Author: Ma-Fra / 20.01.2009 2 Table of contents Technical data sheets to the part number...
More informationOracle Enterprise Data Quality for Product Data
Oracle Enterprise Data Quality for Product Data Glossary Release 5.6.2 E24157-01 July 2011 Oracle Enterprise Data Quality for Product Data Glossary, Release 5.6.2 E24157-01 Copyright 2001, 2011 Oracle
More informationMercateo Catalogue Management for Suppliers
The procurement platform for your business Quick Reference Guide Mercateo Catalogue Management for Suppliers Table of contents Login to the Mercateo Catalogue Management 2 Overview of the Catalogue Update
More informationan Important Step Toward an Integrated Electronic Engineering and Business Workflow
PROLIST List of Properties an Important Step Toward an Integrated Electronic Engineering and Business Workflow Abstract Optimizing the engineering and business workflow with up-to-date computer programming
More informationTSMAD: Transfer Standard Maintenance & Applications Development WG Julia Powell Vice Chair
TSMAD: Transfer Standard Maintenance & Applications Development WG Julia Powell Vice Chair ToR Objectives To maintain, develop and extend: (i) the S-57 IHO transfer standard for digital hydrographic data;
More informationD2.5 Data mediation. Project: ROADIDEA
D2.5 Data mediation Project: ROADIDEA 215455 Document Number and Title: D2.5 Data mediation How to convert data with different formats Work-Package: WP2 Deliverable Type: Report Contractual Date of Delivery:
More informationNational BIM Standard - United States Version 3
National BIM Standard - United States Version 3 2 Reference Standards 2.5 International Framework for Dictionaries Library / buildingsmart Data Dictionary Revised May 2012 CONTENTS 2.5.1 Scope... 3 2.5.2
More informationUpdate to Creo Parametric 4.0 from Creo Parametric 2.0
Update to Creo from Creo Parametric 2.0 Overview Course Code Course Length TRN-5125-T 16 Hours In this course, you will learn how to utilize the variety of functionality enhancements in Creo. You will
More informationIFC and building classification
IFC International Allience for Interoperabilit, IAI, founded in 1995 IAI develops the IFC (Industr Foundation Classes), an international standard for interoperabilit of object-oriented information sstems
More informationSDP Science Pipeline Management Use Case View
SDP Science Pipeline Management Use Case View M. Ashdown TABLE OF CONTENTS 1. Primary Representation 2 2. Element Catalogue 2 2.1. Elements and Their Properties 2 2.1.1 Science Operations 2 2.1.3 Manage
More informationTOWARDS A META-MODEL FOR COLLABORATIVE CONSTRUCTION PROJECT MANAGEMENT
M Keller, K. Menzel & R.J. Scherer: Towards a Meta-Model for Collaborative Construction Project Management. PRO-VE 2005, 6 th IFIP Working Conference on Virtual Enterprises, Valencia Spain, 26-28.09.2005
More informationRoadBIM Seminar Tallinn. Ongoing Swedish InfraBIM Activities Väino Tarandi, KTH & buildingsmart Sweden
RoadBIM Seminar 11.09.2013 Tallinn Ongoing Swedish InfraBIM Activities Väino Tarandi, KTH & buildingsmart Sweden Agenda The Swedish Transport Administration BIM implementation V-con BIM-examples Stockholm
More information(Geo)DCAT-AP Status, Usage, Implementation Guidelines, Extensions
(Geo)DCAT-AP Status, Usage, Implementation Guidelines, Extensions HMA-AWG Meeting ESRIN (Room D) 20. May 2016 Uwe Voges (con terra GmbH) GeoDCAT-AP European Data Portal European Data Portal (EDP): central
More informationIntegrated Aircraft Design
11th European Workshop on Aircraft Design Education, Linköping, 17.-19.09.201319.09.2013 Integrated Aircraft Design Network Raghu Chaitanya.M.V & Ingo Staack, Petter Krus Linköping University, Linköping,
More informationIntegration of Parametric Geometry into IFC-Bridge
Integration of Parametric Geometry into IFC-Bridge Yang Ji 1, Jakob Beetz 2, Nicholas Nisbet 3, Peter Bonsma 4, Casimir Katz 5, André Borrmann 1 1 Computational Modelling and Simulation Group, Technische
More informationNeW! automatic Classification
NeW! automatic Classification 1. 2. 3. 4. 5. 6. Is your company wasting too much time in searching? Is the diversity of too high and should it be decreased? Are your engineers re-inventing things instead
More informationcuneco centre for digital construction a bips initiative on classification, properties, information
cuneco centre for digital construction a bips initiative on classification, properties, information levels and QTO buildingsmart Network Meeting Thursday June 9th 2011 Background for establishing cuneco
More informationDOE SENSITIVITY ANALYSIS WITH LS-OPT AND VISUAL EXPLORATION OF DESIGN SPACE USING D-SPEX AUTHORS: CORRESPONDENCE: ABSTRACT KEYWORDS:
DOE SENSITIVITY ANALYSIS WITH LS-OPT AND VISUAL EXPLORATION OF DESIGN SPACE USING D-SPEX AUTHORS: Katharina Witowski Heiner Muellerschoen Marko Thiele DYNAmore GmbH Uwe Gerlinger AUDI AG CORRESPONDENCE:
More informationbuildingsmart International An Update Richard Petrie, Chief Executive October 2017
buildingsmart International An Update Richard Petrie, Chief Executive October 2017 Three Important Questions Why are Open, Universal Digital Standards important? Why is buildingsmart important for Open
More informationHow to deal with custom objects in Bentley Applications
AEC Integration Lab @ Georgia Tech How to deal with custom objects in Bentley Applications Ph.D. student: Jin-Kook Lee Professor: Charles M. Eastman Design Computing, College of Architecture Georgia Institute
More informationclustering SVG shapes
Clustering SVG Shapes Integrating SVG with Data Mining and Content-Based Image Retrieval Michel Kuntz Fachhochschule Kaiserslautern Zweibrücken, Germany SVG Open 2010 1 Presentation Overview Context, Problem,
More informationAircraft Systems Engineering. Ingo Staack 11 th MODPROD Workshop 7-8 February, 2017
Aircraft Systems Engineering Ingo Staack 11 th MODPROD Workshop 7-8 February, 2017 Why (Conceptual) Aircraft Systems Engineering? multi-aspect, multi-domain project specific low efforts, short period,
More informationStarting points. A significant cost factor of industrial production systems is the engineering process. A survey revealed:
Starting points A significant cost factor of industrial production systems is the engineering process. A survey revealed: That 82% of the interviewed experts say that redundancy on planning steps exits.
More informationWeb Ontology Language for Service (OWL-S) The idea of Integration of web services and semantic web
Web Ontology Language for Service (OWL-S) The idea of Integration of web services and semantic web Introduction OWL-S is an ontology, within the OWL-based framework of the Semantic Web, for describing
More informationSandvik Coromant Technical White Paper GTC Guidelines Introduction to Generic Tool Classification
GTC Guidelines Introduction to Generic Tool Classification GTC Guidelines White paper Communicating tool data among tool vendors and systems has always been quite a challenge. The introduction of the ISO
More informationDISTRIBUTED MODELING FOR ROAD AUTHORITIES
DISTRIBUTED MODELING FOR ROAD AUTHORITIES Sander van Nederveen, g.a.vannederveen@tudelft.nl Delft University of Technology, Delft, The Netherlands Esra Bektas, esra.bektas@tno.nl Bart Luiten, bart.luiten@tno.nl
More informationPoint Clouds to IFC/BrIM Objective:
Point Clouds to IFC/BrIM Objective: Develop and demonstrate a point cloud data processing solution, which takes a point cloud of a bridge obtained from laser scanning as input, and generates a solid model
More informationVerwaltung und Qualitätssicherung von BIM-Modellen via IFCWebServer.org Data Server
Verwaltung und Qualitätssicherung von BIM-Modellen via IFCWebServer.org Data Server Ali Ismail M.Sc. TU Dresden Institut für Bauinformatik Development Leader @ IFCWebServer.org Content Short introduction
More informationCATIA V5-6R2015 Product Enhancement Overview
Click to edit Master title style CATIA V5-6R2015 Product Enhancement Overview John Montoya, PLM Technical Support March 2015 1 2010 Inceptra LLC. All rights reserved. Overview of Enhanced Products Overview
More informationImplementing Data Models and Reports with Microsoft SQL Server Exam Summary Syllabus Questions
70-466 Implementing Data Models and Reports with Microsoft SQL Server Exam Summary Syllabus Questions Table of Contents Introduction to 70-466 Exam on Implementing Data Models and Reports with Microsoft
More informationMODULAR CONCEPT AND BASIC FUNCTIONS OF SPEEDIKON C
MODULAR CONCEPT AND BASIC FUNCTIONS OF SPEEDIKON C speedikon C is a highly flexible system with unlimited possibilities to map your processes and to display any desired data sets. The modular concept has
More informationN3D G3 N3A. Rockwell hardness testing machine
N3D G3 N3A Rockwell hardness testing machine High efficiency - low cost. Customised test loads and easy handling. N3D G3 N3A Rockwell acc. to EN ISO 6508, ASTM E-18 HRA HRL HR 15-T HR 15-Y HRB HRM HR 30-T
More informationCurriculum Guide. Creo 4.0
Curriculum Guide Creo 4.0 Live Classroom Curriculum Guide Update to Creo Parametric 4.0 from Creo Parametric 3.0 Introduction to Creo Parametric 4.0 Advanced Modeling using Creo Parametric 4.0 Advanced
More information- What we actually mean by documents (the FRBR hierarchy) - What are the components of documents
Purpose of these slides Introduction to XML for parliamentary documents (and all other kinds of documents, actually) Prof. Fabio Vitali University of Bologna Part 1 Introduce the principal aspects of electronic
More informationGeographic information Portrayal (ISO 19117:2005, IDT)
SVENSK STANDARD Fastställd 2006-04-06 Utgåva 1 Geografisk information Schema för visualisering av geografiska data (ISO 19117:2005, IDT) Geographic information Portrayal (ISO 19117:2005, IDT) ICS 35.020;
More informationXML FOR FLEXIBILITY AND EXTENSIBILITY OF DESIGN INFORMATION MODELS
XML FOR FLEXIBILITY AND EXTENSIBILITY OF DESIGN INFORMATION MODELS JOS P. VAN LEEUWEN AND A.J. JESSURUN Eindhoven University of Technology, The Netherlands Faculty of Building and Architecture, Design
More informationJOB SCHEDULER JOB DOCUMENTATION EDITOR
Job Scheduler - Job Documentation Editor JOB SCHEDULER JOB DOCUMENTATION EDITOR Instructions for Creating Job Documentation August 2006 Software- und Organisations-Service GmbH Giesebrechtstr. 15 D-10629
More informationNew trends in Identity Management
New trends in Identity Management Peter Gietz, DAASI International GmbH peter.gietz@daasi.de Track on Research and Education Networking in South East Europe, Yu Info 2007, Kopaionik, Serbia 14 March 2007
More informationINTELLIGENT SYSTEM OF GEARBOXES DESIGN
6 th INTERNATIONAL MULTIDISCIPLINARY CONFERENCE INTELLIGENT SYSTEM OF GEARBOXES DESIGN Eugen Valentin, BUTILĂ, Transilvania University of Braşov, Eroilor, 29, 500036 Gheorghe Leonte, MOGAN, Transilvania
More informationIAI / IFC Concept of the IFC Standard and the relation to ISO & XML
IAI / IFC Concept of the IFC Standard and the relation to ISO & XML Dr. Thomas Liebich AEC3, München IAI International - MSG Lead liebich@uumail.de Interop in AEC&fm Sydney, Australia 29.-30.10.2001 AEC3
More informationWhere do these data come from? What technologies do they use?? Whatever they use, they need models (schemas, metadata, )
Week part 2: Database Applications and Technologies Data everywhere SQL Databases, Packaged applications Data warehouses, Groupware Internet databases, Data mining Object-relational databases, Scientific
More informationImplementing manufacturing feature based design in CAD/CAM
Implementing manufacturing feature based design in CAD/CAM T. Szecsi School of Mechanical and Manufacturing Engineering, Materials Processing Research Centre, Dublin City University, Dublin 9, Ireland
More informationRui Reis, Maria José Vale, Marcelo Ribeiro, Bruno Meneses Geospatial World Forum 2016, May 2016, Rotterdam
LC change detection and planning indicators Rui Reis, Maria José Vale, Marcelo Ribeiro, Bruno Meneses Summary 1. 2. 3. 4. 5. 6. 7. 8. Introduction Pilot overview Data description Inspire data harmonization
More informationDURAARK. Ex Libris conference April th, 2013 Berlin. Long-term Preservation of 3D Architectural Data
DURAARK Long-term Preservation of 3D Architectural Data Ex Libris conference April 29-30 th, 2013 Berlin Dr Helmi Ben Hmida (Leibniz University Hanover, DE) 1 / 33 30 / 04 / 13 Dr Helmi Ben Hmida (Leibniz
More informationWhat s new in MEMS Pro V8.0 Highlights
Click to edit Master title style 1 What s new in MEMS Pro V8.0 Highlights Click Contents to edit Master title style New platform support File I/O enhancements 3D Modeling enhancements Layout enhancements
More informationstandard Introduction November 2015
The COINS standard Introduction November 2015 Agenda Summary Why COINS What is COINS Scope COINS container exchange format Integration examples Integration GIS Integration documents Integration IFC and
More informationBentley Building Datasets The I in BIM
Bentley Building Datasets The I in BIM Volker Thein Dipl.-Ing. Arch. Product Director - Bentley Building Topics Dataset Overview Purpose of BIM Outputs from BIM Inputs into BIM Dataset Customization Project
More informationACP (ANSYS Composite Prep/Post) Jim Kosloski
ACP (ANSYS Composite Prep/Post) Jim Kosloski ACP Background ANSYS Composite PrepPost is an add-on module dedicated to the modeling of layered composite structures. ACP is now included with the Mechanical
More informationPublishing Technology 101 A Journal Publishing Primer. Mike Hepp Director, Technology Strategy Dartmouth Journal Services
Publishing Technology 101 A Journal Publishing Primer Mike Hepp Director, Technology Strategy Dartmouth Journal Services mike.hepp@sheridan.com Publishing Technology 101 AGENDA 12 3 EVOLUTION OF PUBLISHING
More informationLatest Developments. in versions v14.x. BETA CAE Systems S.A. June 2013 Dipl.-Ing. Dimitrios Katramados Customers Service Post-Processing Applications
Latest Developments BETA CAE Systems S.A. in versions v14.x June 2013 Dipl.-Ing. Dimitrios Katramados Customers Service Post-Processing Applications 1 Areas of Development User Interface GUI Results handling
More informationThe Plan4business Approach to Transfer Open Data into Real Estate Businesses
The Plan4business Approach to Transfer Open Data into Real Estate Businesses Jan Ježek 1, Tomáš Mildorf 1, Karel Charvát Jr. 2, and Karel Charvát 3 1 University of West Bohemia, Pilsen, Czech Republic
More informationGML Clarifications. IHO S-100WG April 2018 Raphael Malyankar; Eivind Mong. Work sponsored by NOAA
GML Clarifications IHO S-100WG3 10-13 April 2018 Raphael Malyankar; Eivind Mong Work sponsored by NOAA Overview of proposal/presentation The proposal for Part 10b contains: Modifications arising from splines
More informationSubmitting content to TRID, the TRIS and ITRD database. VTI s experience
Submitting content to TRID, the TRIS and ITRD database. VTI s experience Birgitta Sandstedt, Swedish National Road and Transport Research Institute (VTI) Swedish National Road and Transport Research Institute
More informationIntelligent Information
Intelligent Information for Smart Users Dr Michael Fritz, tekom 1 Digital Transformation Everything is smart WHAT MAKES INFORMATION SMART? 2 DIGITAL TRANSFORMATION Three Dimensions Prof. Key Pousttchi
More informationOPTIMUS MOTUS Motion Designer
Harmonic motions for servo drives with electronic cams Grafic definition of the complete displacement plan Automatic generation of an acceleration optimized displacement diagram from the displacement plan
More informationCADMATIC is a registered trademark of CADMATIC Oy. All other trademarks are the property of their respective owners.
Diagram Outfitting & Plant Design Hull Information Management: eshare, ebrowser, ego Release highlights 2018T2 Version 2018T2 includes many additions that increase the productivity of work in 3D and the
More informationMulti-models: New potentials for the combined use of planning and controlling information
M.Sc. Sven-Eric Schapke, Institut für Bauinformatik, Technische Universität Dresden Dr.-Ing. Christoph Pflug, Max Bögl Multi-models: New potentials for the combined use of planning and controlling information
More informationOn Usability in Requirements Trace Visualizations
On Usability in Requirements Trace Visualizations Stefan Winkler stefan.winkler-et@fernuni-hagen.de Fakultät Mathematik und Informatik FernUniversität in Hagen 9/8/2008 Traceability Definition (Traceability)
More informationFirst Steps - Ball Valve Design
COSMOSFloWorks 2004 Tutorial 1 First Steps - Ball Valve Design This First Steps tutorial covers the flow of water through a ball valve assembly before and after some design changes. The objective is to
More informationTowards an Integrated Grid- and Cloud-based Structural Analysis Platform
431 Towards an Integrated Grid- and Cloud-based Structural Analysis Platform M. Polter 1, A. Ismail 2 and R. J. Scherer 3 Technische Universität Dresden, Germany 1 Michael.Polter@tu-dresden.de, 2 Ali.Ismail@tu-dresden.de,
More informationOntology Modelling of Industry Standards for Large Model Visualization and Design Review using Protégé
Ontology Modelling of Industry Standards for Large Model Visualization and Design Review using Protégé Jorge Posada, Carlos Toro, Stefan Wundrak, André Stork 8th Intl. Protégé Conference - July 18-21,
More informationRobustness analysis of metal forming simulation state of the art in practice. Lectures. S. Wolff
Lectures Robustness analysis of metal forming simulation state of the art in practice S. Wolff presented at the ICAFT-SFU 2015 Source: www.dynardo.de/en/library Robustness analysis of metal forming simulation
More informationDocument C503. Tunis, Tunisia 29 Oct. - 4 Nov Abstract MEETING OF WHO COLLABORATING CENTRES FOR THE FAMILY OF INTERNATIONAL CLASSIFICATIONS
MEETING OF WHO COLLABORATING CENTRES FOR THE FAMILY OF INTERNATIONAL CLASSIFICATIONS Tunis, Tunisia 29 Oct. - 4 Nov. 2006 Maintenance and Publication Tool for WHOFIC Classifications Stefanie Weber, Susanne
More informationEasy-to-see Distinguishable and recognizable with legibility. User-friendly Eye friendly with beauty and grace.
Bitmap Font Basic Concept Easy-to-read Readable with clarity. Easy-to-see Distinguishable and recognizable with legibility. User-friendly Eye friendly with beauty and grace. Accordance with device design
More informationLibrary Part Maker for ARCHICAD 20
Library Part Maker for ARCHICAD 20 User Guide United Kingdom & Ireland Printable PDF version GRAPHISOFT Visit the GRAPHISOFT website at http://www.graphisoft.com for local distributor and product availability
More informationCEN/ISSS WS/eCAT. Terminology for ecatalogues and Product Description and Classification
CEN/ISSS WS/eCAT Terminology for ecatalogues and Product Description and Classification Report Final Version This report has been written for WS/eCAT by Mrs. Bodil Nistrup Madsen (bnm.danterm@cbs.dk) and
More informationHall 4 / F April w w w. d a t a - m. c o m. +++ Division Software +++ Division Automation
Hall 4 / F19 2014 Tube Düsseldorf 07. - 11. April 2014 5 Reasons... why COPRA RF and COPRA FEA RF Software for Tubes are superior to any other roll forming software and can save you time and money... Reason
More informationComposable Code Generation Applied to MDA
Composable Code Generation Applied to MDA Kirk Schloegel, David Oglesby, Eric Engstrom MDA Implementers Workshop December 2-5, 2003 Work is supported by a grant from DARPA. Agenda Modeling, Meta-modeling,
More informationWelcome to Singapore. Richard Petrie CEO buildingsmart International 12 th October 2015
Welcome to Singapore Richard Petrie CEO buildingsmart International 12 th October 2015 Framing the last two years Establishing the Strategy & Business Organisation Our Strategy The Goal Enable full benefits
More informationDIGIT.B4 Big Data PoC
DIGIT.B4 Big Data PoC GROW Transpositions D04.01.Information System Table of contents 1 Introduction... 4 1.1 Context of the project... 4 1.2 Objective... 4 2 Technologies used... 5 2.1 Python... 5 2.2
More informationInformation & Translation Technologies
TRANSaccount Project Deliverable D3.2 Systran Integrated text and form translator for accounting report Translation of XBRL accounting reports. Introduction We describe in this report the integrated text
More informationINFACTORY : A RESTFUL API SERVER FOR EASILY CREATING INDOORGML
INFACTORY : A RESTFUL API SERVER FOR EASILY CREATING INDOORGML Hyemi Jeong, Hyung-gyu Ryoo, Ki-Joune Li Dept. of Computer Science&Engineering, Pusan National University, Kumjeong-Gu, 46241, Pusan, South
More informationAmpereSoft ToolSystem 2015
AmpereSoft ToolSystem 2015 New Functions & Improvements AmpereSoft ProPlan AmpereSoft MatClass AmpereSoft ToolDataManager NEW: AmpereSoft TemperatureCalculator 2015 by AmpereSoft GmbH Any software and
More informationElectronic Commerce: A Killer (Application) for the Semantic Web?
Electronic Commerce: A Killer (Application) for the Semantic Web? Dieter Fensel Vrije Universiteit Amsterdam http://www.cs.vu.nl/~dieter, dieter@cs.vu.nl. Slide 1 Contents 1. Semantic Web Technology 2.
More informationChanges and innovations delivered with SoundPLAN version 7.0
Changes and innovations delivered with SoundPLAN version 7.0 Highlights New layout and more information in the SoundPLAN Manager New Dynamic Search calculation core with Multi-threading, higher accuracy
More informationConfigurator 360 Hands-On Lab
Configurator 360 Hands-On Lab Pierre Masson Premium Support Specialist Join the conversation #AU2017 #AUGermany Preliminary step Enable C360 Go the trial page of C360 and enable it : http://www.autodesk.com/products/configurator-360/free-trial
More informationINTEGRATED ANISOTROPIC SIMULATION FOR COMPONENTS MADE FROM GLASS FIBER REINFORCED THERMOPLASTICS
INTEGRATED ANISOTROPIC SIMULATION FOR COMPONENTS MADE FROM GLASS FIBER REINFORCED THERMOPLASTICS David Sheridan Ticona, Auburn Hills, Michigan Ulrich Mohr-Matuschek & Anton Grzeschik Ticona, Sulzbach,
More informationMethods for requirements engineering
Methods for requirements engineering Objectives To explain the role of methods and techniques in requirements engineering To introduce data-flow modelling To introduce semantic data modelling To introduce
More informationLive Classroom Curriculum Guide
Curriculum Guide Live Classroom Curriculum Guide Milling using Pro/ENGINEER Wildfire 4.0 Pro/ENGINEER Mechanica Simulation using Pro/ENGINEER Wildfire 4.0 Introduction to Pro/ENGINEER Wildfire 4.0 Pro/ENGINEER
More informationFinite Element Analysis Using Creo Simulate 4.0
Introduction to Finite Element Analysis Using Creo Simulate 4.0 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationASAM MCD-2 D (ODX) Data Model for ECU Diagnostics (Open Diagnostic Data Exchange) Data Model Specification. Base Standard
ASAM MCD-2 D (ODX) Data Model for ECU Diagnostics (Open Diagnostic Data Exchange) Data Model Specification Version 2.2.0 Date: 2008-05-18 Base Standard by ASAM e.v., 2008 Disclaimer This document is the
More informationPortalU, a Tool to Support the Implementation of the Shared Environmental Information System (SEIS) in Germany
European conference of the Czech Presidency of the Council of the EU TOWARDS eenvironment Opportunities of SEIS and SISE: Integrating Environmental Knowledge in Europe http:/www.e-envi2009.org/proceedings/
More informationRationale and Method for design of DEMO Breeding Blanket Poloidal Segmentation
EUROFUSION WPBB-CP(16) 15438 R Mozzillo et al. Rationale and Method for design of DEMO Breeding Blanket Poloidal Segmentation Preprint of Paper to be submitted for publication in Proceedings of 29th Symposium
More information