Matrox Imaging Product Line

Transcription

1 Matrox Imaging Product Line

2 Matrox Imaging product line Frame grabbers Stand-alone systems (e.g., Matrox MeteorII/Camera Link) (Matrox 4Sight family) Software (Matrox Imaging Library (MIL), Matrox Inspector) Smart cameras Vision processors (Matrox Iris) (Matrox Odyssey family)

3 Matrox Frame Grabbers»Existing Frame Grabbers Meteor-II Series Corona-II Orion CronosPlus Helios Solios Morphis

4 Matrox VIO HD»Medical imaging has been on a quest for better image quality and higher resolutions»ntsc/pal have become a major limitation in many applications»some vendors created their own proprietary digital interfaces, while others started to embrace the video broadcasting standards»hdtv formats»sdi (Serial Digital Interface)»SDI cables can easily reach 100ft or 30m in length

5 Matrox VIO HD (cont.)»high Definition (HD) and Standard Definition (SD) SDI video capture and display board»smpte 292M, 259M and 296M»Hardware overlay»pci Express (PCIe) x4 host interface»128mb on-board memory»low latency and synchronized video out» No tearing video out

6 Matrox Solios GbE» PCI Express (PCIe) short card» x4 PCIe host interface» One or two or four Gigabit Ethernet (GbE) ports» Off-the-shelf GbE controllers with host offload» Customizable processing FPGA» Support for Windows 2000/XP and Linux» Product introduction in Q1/2006

7 Matrox Imaging product line»iris P-Series smart cameras»iris E-Series smart cameras

8 Iris Wafer Reader

9 Iris Wafer Reader»Completely integrated unit targeted at wafer ID reading»incorporates lens and lighting»based on the P700»1024x768 at 20 fps, monochrome 1/3 CCD»Lighting specifications»red LEDs 610nm wavelength»independent bright field and dark field intensity control

10 Iris Wafer Reader (cont.)» Optical specifications» Field of view: 26mm(h) x 13mm(w)» Working distance: 35mm» Depth of field: 3mm» Supported wafer marks» OCR: SEMI / M12, M13, M1.15» 2D code: Data Matrix (ECC200)» 1D code: BC412 Return

11 Matrox 4Sight Family» Same connectivity as 4Sight-II where applicable Front view Back view

12 Matrox 4Sight Family (cont.)»additional CPU option»pentium M at 2.0GHz ( Dothan 2MB L2 cache)»front side bus at 533MHz»Follows new technology of Intel on CPU core and PCI Express

13 Matrox 4Sight Family (cont.)» Morphis for PC/104-Plus»Same characteristics as PCI equivalent»same connectivity as PCI board with a single HD44 connector for video input»two decoder version only (no quad version)»i/os, serial port and watchdog timer not present»support already available in MIL 8.0

14 Matrox 4Sight Family (cont.)»considering design of a 1394b PC/104 -Plus adapter board»features many!»price cheap!»availability yesterday! Return

15 Matrox Vision Processor» Balanced architecture Motorola G4 PowerPC» Control code and high-level algorithms» Floating point (12 GFLOPS) Matrox Oasis ASIC» SIMD integer processing (42 GMACs, 5.3 GB/s)» Easy to program Co-processor FPGA Altera Stratix II family» Fast random access (e.g. LUTs, warping)» Efficient binary processing» Operations not suited to SIMD model of G4 or Oasis

16 Matrox Vision Processor Odyssey XPRO+ (cont.)» Altera Stratix II family ( 60K to 179K logic elements» 144 to 384 embedded multipliers» 2.5 to 9.3 Mbits internal RAM» Clock speed over 250MHz» 8, 16, 32 or 64MB of QDRII SRAM» Aggregate memory bandwidth of up to 8 GB/sec (4GB/sec input and 4GB/sec output)» 2 GB/sec off-chip I/O bandwidth

17 Matrox Vision Processor Odyssey XPRO+ (cont.) Current processing FPGA architecture

18 Matrox FDK» New software product offering to complement the C libraries environment for VHDL and C-to-gates environments» Enables customers to develop their own processing FPGA design based on a Matrox provided framework» FDK is comprised of a Matrox add-on kit to a thirdparty EDA tool (e.g., Altera Quartus II) that is bundled or purchased separately

19 Matrox FDK (cont.)»vhdl-level FPGA Development Toolkit (MIL FDK)»Intially supports the Altera integrated FPGA programming environment with its Avalon switch»targeting at Q4 2005»C-level FDK C toolkit based on the Celoxica tool»targeting at Q2 2006

20 Next Generation FPGA board»pci Express (PCIe) long card»x8 PCIe host interface»four Gigabit Ethernet (GbE) ports»off-the-shelf GbE controllers with host offload

21 Next generation FPGA board (cont.)»camera Link or custom digital external I/O module»customizable I/O control FPGA with one to three processing FPGAs»Support for Windows 2000/XP and Linux

22 Programming environment»common C API supporting entire hardware line»intuitive and easy-to-use function set

23 Programming environment»ready-made interactive dialogs MmodControl(MilSearchContext,M_CONTEXT,M_INTERACTIVE, M_NULL); MmodGetResult(MilResult, M_DEFAULT, M_INTERACTIVE, M_NULL);

24 ActiveMIL» Rapid Windows application development with ActiveMIL» Collection of ActiveX controls (OCX) built on top of MIL» Quickly put together applications with a custom professional-looking Windows user interface» Less program code through drag-and-drop tool placement and point-and-click configuration» Save time by focusing on imaging task rather than creating user interface

25 Matrox Intellicam» Enter or simply adjust video timing and synchronization parameters

26 Matrox Intellicam (cont.)» Try ready-made interfaces available from Matrox Imaging web site

27 Image processing and analysis» Image processing» Blob analysis» Calibration» Code Reader» Edge Finder» Geometric Model Finder (GMF) (feature-based pattern matching)» Metrology» OCR» Pattern matching (NGC-based)» String Reader (feature-based OCR)

28 Edge Finder module»powerful edge extraction tool for defect detection, shape recognition and analysis»quickly extract and construct object contours (outlines) or thin-line crests (skeletons)»calculate numerous edge features and feature statistics»accuracy well over 1/40 th of a pixel»calculations performed in fixed or floating point

29 Edge Finder module (cont.)»sort and select edges and sub-edges by feature, edge inter-relationship or proximity»modify extraction and adjust construction parameters»draw edges and various features»save edges to an AutoCAD DXF file»send edge data to GMF for model definition and actual search Demo

30 GMF module» Pattern (model) recognition using geometric features (contours)» Supports manual or automatic model definition» Construct a model from previous models» Apply model masks (don t care, flat or possitive/negative weighted regions)» Search for multiple models and/or occurrences in parallel

31 GMF module (cont.)»search algorithm is robust to»translation»rotation (0 to 360 )»Scale (50% to 200%)»Absence and occlusion of significant contours»non-uniform contrast changes (e.g., specular reflection) including full/partial contrast reversal

32 GMF module (cont.)» Highly accurate positioning» Up to 1/40 th of a pixel for translation» Up to 1/20 th of a degree for rotation» Up to 1% for scale» Search speed is» independent of rotation» loosely dependent on size of model» loosely dependent on number of models and/or occurrences Demo

33 String Reader module»sophisticated feature-based character recognition»context-based definition supports multiple string models (reading parameters and constraints) and/or fonts»allocate fonts semi-automatically (no need to identify individual characters) or using predefined fonts (TrueType and Postscript )

34 String Reader module (cont.)»manage fonts, control string models, establish grammar rules and adjust overall context settings»automatically locate (no ROI necessary) and read a string or multiple strings at once (on same or different line)»handles extreme contrast variations including contrast reversal

35 String Reader module (cont.)»automatically accommodates changes in»scale (50% to 200% from reference)»aspect ration (0.5 to 2.0 from reference)»rotation ( 10 )»character skew»character angle different from string angle Demo

36 Metrology module»basic 1D and 2D metrology»automatically locate markers (edges and stripes)»find multiple markers at once»specify markers (points, edges and striped)»determine and draw various marker characteristics and metrics First official release PP3 (March 2006) Demo

37 Miscellaneous image processing»lossy and lossless JPEG and JPEG2000 compression and decompression»bayer filter using bilinear interpolation or adaptive algorithm with support»white balancing»gamma correction»color artifact correction (adaptive only)

38 Licensing»Development package includes a single-user license (i.e., dongle) providing complete access to MIL»Run-time licenses (i.e., dongle or activation code) for application deployment are available as packages (module or group of modules)»unlimited license available for application development and deployment Return