FREEZER, UNDERCOUNTER; COSPOLICH MODELS UCF10-2M-SN, UCF20-2M-SN, AND UCF30-2M-SN
|
|
|
- Adelia Tucker
- 6 years ago
- Views:
Transcription
1 S6161-XL-FSE LP TECHNICAL MANUAL INSTALLATION, OPERATION AND MAINTENANCE FREEZER, UNDERCOUNTER; COSPOLICH MODELS UCF10-2M-SN, UCF20-2M-SN, AND UCF30-2M-SN DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED DEPARTMENT OF THE NAVY NAVY MEDICAL LOGISTICS COMMAND 3 NOVEMBER 2006
2 S6161-XL-FSE-010 LIST OF EFFECTIVE PAGES Dates of Original and Change Pages are: Original NOV 2006 Insert latest changed pages; dispose of superseded pages. NOTE: On a changed page, the portion of the text affected by the latest change is indicated by a vertical line in the outer margin of the page. Changes to illustrations are indicated by miniature pointing hands. Total number of pages in this publication is 154 consisting of the following: Page *Change Page *Change No. No. No. No. Title and A... 0 #Foreword-1/(foreword-2 blank)... 0 Section 1 UCF10-2M-SN Pages Section 2 UCF20-2M-SN Pages Section 3 UCF30-2M-SN... 48Pages NOTE If pages are marked with a change level but no change symbol, such pages contain original text placed on different pages, deleted material, and/or pages that have been added to the manual. *Zero in this column indicates an original page. #Pages are printed single sided. A Change 1
3 S6161-XL-FSE-010 FOREWORD This technical manual provides description, operation, maintenance, installation, and parts list information for the COSPOLICH Under counter Freezer Models UCF10-2M-SN, UCF20-2M-SN AND UCF30-2M-SN. This manual contains the material for the operation and maintenance of the Undercounter Freezers. The manual consists of one volume arranged in three sections: Section 1. COSPOLICH Model UCF10-2M-SN Section 2. COSPOLICH Model UCF20-2M-SN Section 3. COSPOLICH Model UCF30-2M-SN Ships, training activities, supply points, depots, Naval Shipyards, and Supervisors of Shipbuilding are requested to arrange for the maximum practical use and evaluation of NAVSEA technical manuals. All errors, omissions, discrepancies, and suggestions for improvement to NAVSEA technical manuals shall be forwarded via to or via surface mail to: COMMANDER CODE 310 TMDER BLDG 1388 NAVSURFWARCENDIV NSDSA 4363 MISSLE WAY PORT HUENEME, CA on NAVSEA Technical Manual Deficiency/Evaluation Report (TMDER), NAVSEA form 4160/1. All feedback comments shall be thoroughly investigated and originators will be advised of action resulting therefrom. Three copies of NAVSEA form 4160/1 are at the end of each separately bound technical manual 8-1/2 x 11 inches or larger. Copies of NAVSEA form 4160/1 may be requisitioned from the Naval Systems Data Support Activity, Code 310, at the above address. Users are encouraged to transmit deficiency submittals via the Naval Systems Data Support Activity Web site located at: Individual electronic TMs do not contain NAVSEA form 4160/1, but are linked to an electronic version on the resident CD-ROM. Therefore, we encourage the user to transmit deficiency submittals via the Naval Systems Data Support Activity Web site located above. Foreword-1/(Foreword-2 blank)
4
5 S6161-XL-FSE-010 SECTION 1 COSPOLICH MODEL UCF10-2M-SN
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55 S6161-XL-FSE-010 SECTION 2 COSPOLICH MODEL UCF20-2M-SN
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105 S6161-XL-FSE-010 SECTION 3 COSPOLICH MODEL UCF30-2M-SN
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155 Ref: NAVSEAINST A NAVSEA S0005-AA-GYD-030/TMMP NAVSEA/SPAWAR TECHNICAL MANUAL DEFICIENCY/EVALUATION REPORT (TMDER) INSTRUCTIONS: Continue on 8 ½ x 11 page if additional space is needed. 1. Use this report to indicate deficiencies, problems and recommendations relating to publications. 2. For CLASSIFIED TMDERs see OPNAVINST 5510H for mailing requirements. 3. For TMDERs that affect more than one publication, submit a separate TMDER for each. 4. Submit TMDERs at web site or mail to: COMMANDER, CODE 310 TMDER BLDG 1388, NAVSURFWARCENDIV NSDSA, 4363 MISSILE WAY, PORT HUENEME CA PUBLICATION NUMBER 2. VOL/PART 3. REV/DATE OR CHG/DATE 4. SYSTEM/EQUIPMENT ID 5. TITLE OF PUBLICATION 6. REPORT CONTROL NUMBER (6 digit UIC-YY-any four: xxxxxx-03-xxxx) 7. RECOMMEND CHANGES TO PUBLICATION 7a. Page # 7b. Para # 7c. RECOMMENDED CHANGES AND REASONS 8. ORIGINATOR S NAME AND WORK CENTER 9. DATE 10. ORIGINATOR S ADDRESS 11. TMMA of Manual (NSDSA will complete) 12. SHIP OR ACTIVITY Name and Address (Include UIC/CAGE/HULL) 13. Phone Numbers: Commercial ( ) - DSN - FAX ( ) - NAVSEA 4160/1 (Rev ) S/N 0116-lf
156 FOLD HERE AND TAPE SECURELY PLEASE DO NOT STAPLE INCLUDE COMPLETE ADDRESS USE PROPER POSTAGE FOR OFFICE USE ONLY COMMANDER CODE 310 BLDG 1388 NAVSURFWARCENDIV NSDSA 4363 MISSILE WAY PORT HUENEME, CA FOLD HERE AND TAPE SECURELY PLEASE DO NOT STAPLE
TAG-OUT USERS MANUAL
S0400-AD-URM-010/TUM NSN REVISION 06 NAVSEA TECHNICAL PUBLICATION TAG-OUT USERS MANUAL Published by direction of Commander, Naval Sea Systems Command 05 NOVEMBER 2009 CHANGES AND REVISIONS: TAG-OUT
Product Data Reporting and Evaluation Program (PDREP) Attachment Tool
Product Data Reporting and Evaluation Program (PDREP) Attachment Tool User Guide February 2018 Table of Contents FOREWORD 1 INTRODUCTION 2 ATTACHMENT TOOL 3 SUMMARY 7 *Hold the CTRL key and click on paragraph
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Cloning 1227s
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Cloning 1227s User Guide February 2018 Table of Contents FOREWORD 1 INTRODUCTION 2 1 VIEWING THE WORKLIST
DCMA Quality Assurance Representative (QAR) Product Quality Deficiency Report (PQDR) Investigations in Product Data Reporting and Evaluation Program
DCMA Quality Assurance Representative (QAR) Product Quality Deficiency Report (PQDR) Investigations in Product Data Reporting and Evaluation Program (PDREP) User Guide November 2017 Table of Contents FOREWORD
Product Data Reporting and Evaluation Program (PDREP) Automated Information System (AIS) Supplier Audit Program (SAP) Application
Product Data Reporting and Evaluation Program (PDREP) Automated Information System (AIS) Supplier Audit Program (SAP) Application User Guide May 2018 TABLE OF CONTENTS FOREWORD 3 INTRODUCTION 4 1 ACCESS
Product Data Reporting and Evaluation Program (PDREP)
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Screening Point Processing User Guide February 2018 Table of Contents FOREWORD 1 INTRODUCTION 2 1 VIEWING
SUPPORT POINT Deficiency Report Program Manager (DRPM)
SUPPORT POINT Deficiency Report Program Manager (DRPM) Product Quality Deficiency Report (PQDR) Receipt In Product Data Reporting and Evaluation Program (PDREP) User Guide July 2018 Table of Contents FOREWORD
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Cloning PQDR
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Cloning PQDR User Guide February 2018 Table of Contents FOREWORD 1 INTRODUCTION 2 VIEWING THE WORKLIST 3 2
Product Data Reporting and Evaluation Program (PDREP) Automated Information System (AIS) Prime Contractor Module
Product Data Reporting and Evaluation Program (PDREP) Automated Information System (AIS) Prime Contractor Module User Guide February 2018 Table of Contents FOREWORD 1 INTRODUCTION 2 1 ACCESSING THE PDREP-AIS
Product Data Reporting and Evaluation Program (PDREP) Customer Service Request (Feedback) Module
Product Data Reporting and Evaluation Program (PDREP) Customer Service Request (Feedback) Module User Guide October 2017 TABLE OF CONTENTS FOREWORD 2 INTRODUCTION 3 1 ACCESS LEVELS 4 2 CREATE A CUSTOMER
Screening Point Army Master Screener Product Quality Deficiency Report (PQDR) Processing In Product Data Reporting and Evaluation Program (PDREP)
Screening Point Army Master Screener Product Quality Deficiency Report (PQDR) Processing In Product Data Reporting and Evaluation Program (PDREP) User Guide February 2018 Table of Contents FOREWORD 1 INTRODUCTION
Joint Fleet Maintenance Manual
Joint Fleet Maintenance Manual COMFLTFORCOMINST 4790.3 REVISION A CHANGE 6 Promulgation Letter Change Synopsis Joint Fleet Maintenance Manual (JFMM) Volume I New Construction Volume II Integrated Fleet
DEFENSE LOGISTICS AGENCY HEADQUARTERS 8725 JOHN J. KINGMAN ROAD FORT BELVOIR, VIRGINIA
DEFENSE LOGISTICS AGENCY HEADQUARTERS 8725 JOHN J. KINGMAN ROAD FORT BELVOIR, VIRGINIA 22060 6221 November 19, 2014 MEMORANDUM FOR SUPPLY PROCESS REVIEW COMMITTEE (PRC) MEMBERS SUBJECT: Approved Defense
PROCEDURES FOR THE ACQUISITION AND DEVELOPMENT OF NAVSEA TMs/IETMs IN ACCORDANCE WITH INTERNATIONAL SPECIFICATION S1000D
NSWCCD-20-TR 2011/06 Procedures for the Acquisition and Development of NAVSEA TMs/IETMs IAW International Specification S1000D Naval Surface Warfare Center Carderock Division West Bethesda, MD 20817-5700
Product Data Reporting and Evaluation Program (PDREP) Contract Award and Delivery (CAD) Data Application
Product Data Reporting and Evaluation Program (PDREP) Contract Award and Delivery (CAD) Data Application Updated October 2017 TABLE OF CONTENTS FOREWORD 3 INTRODUCTION 4 1 ACCESS LEVELS 5 2 SEARCHING AND
Subj: CONDITIONS OF EMPLOYMENT FOR OFFICE OF NAVAL INTELLIGENCE ONI) POLICE OFFICERS. a) Title 5 CFR 339, Medical Qualification Determinations
ONI-51 4 JUN 07 ONI INSTRUCTION 12300.1B Subj: CONDITIONS OF EMPLOYMENT FOR OFFICE OF NAVAL INTELLIGENCE ONI) POLICE OFFICERS Ref: a) Title 5 CFR 339, Medical Qualification Determinations b) OPNAVINST
HP D6000 Disk Enclosure Direct Connect Cabling Guide
HP D6000 Disk Enclosure Direct Connect Cabling Guide Abstract This document provides cabling examples for when an HP D6000 Disk Enclosure is connected directly to a server. Part Number: 682251-001 September
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19975-3 Any reference to SABS 1795-1 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Road traffic law enforcement
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-29504/13A 12 November 2002 SUPERSEDING MIL-T-29504/13 21 May 1992 PERFORMANCE SPECIFICATION SHEET TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, SOCKET TERMINUS,
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Army Action Officer PQDR Processing
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Army Action Officer PQDR Processing User Guide February 2018 Table of Contents FOREWORD 1 INTRODUCTION 2 1
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-29504/1B 12 November 2002 SUPERSEDING MIL-T-29504/1A 19 December 1989 PERFORMANCE SPECIFICATION SHEET TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, PIN TERMINUS,
Submit orders to: https://nll.navsup.navy.mil. Products will ship FREE to your command.
Submit orders to: https://nll.navsup.navy.mil. Products will ship FREE to your command. 1 2 3 4 Decide which products and how many you want - Enter numbers in the order column. For packaged products please
Product Data Reporting and Evaluation Program (PDREP) Automated Information System (AIS) Corrective Action Record (CAR)
Product Data Reporting and Evaluation Program (PDREP) Automated Information System (AIS) Corrective Action Record (CAR) User Guide May 2018 TABLE OF CONTENTS FOREWORD 3 INTRODUCTION 4 1. CORRECTIVE ACTION
Standardizing Warfare System Interfaces to Reduce Integration Costs During Ship Construction, Modernization, and Maintenance
Standardizing Warfare System Interfaces to Reduce Integration Costs During Ship Construction, Modernization, and Maintenance F. Scott Parks 15 March 2016 Study Guidance Objectives Identify commercial data
DISTRIBUTION A: APPROVED FOR PUBLIC RELEASE DISTRIBUTION IS UNLIMITED
DOCUMENT 118-17 Telemetry Group AUTOMATED TEST METHODS FOR XML METADATA ABERDEEN TEST CENTER DUGWAY PROVING GROUND REAGAN TEST SITE REDSTONE TEST CENTER WHITE SANDS MISSILE RANGE YUMA PROVING GROUND NAVAL
Completing Travel Reimbursement Forms Using Electronic Signature
Completing Travel Reimbursement Forms Using Electronic Signature University of Central Florida (UCF) travelers and their supervisors are encouraged to sign travel reimbursement forms using digital signatures.
DEPARTMENT OF DEFENSE
NOTE: The cover page of this standard has been changed for administrative reasons. There are no other changes to this document. INCH-POUND 1 December 1975 SUPESEDING MIL-STD-1560 22 April 1974 DEPARTMENT
Naval Surface Warfare Center,
CAPT Brian R. Durant Commander NSWCDD Technical Director - (540) 653-8103 Dennis M. McLaughlin Technical Director Naval Surface Warfare Center, Dahlgren Naval Undersea DivisionWarfare Center The The Leader
X Aimee Ivey irapt EDI Technical Manager Signed by: IVEY.AIMEE.B
EDI Guide - Appendix X 861 Receiving Advice/Acceptance Certificate (Inbound from EEBP) Version 5.11.1 March 2018 Prepared For: Defense Logistics Agency Prepared By: CACI Enterprise Solutions, Inc. 50 North
EDI Guide - Appendix S 861 Receiving Advice/Acceptance Certificate (Inbound from DSS)
EDI Guide - Appendix S 861 Receiving Advice/Acceptance Certificate (Inbound from DSS) Version 5.12.2 November 2018 Prepared For: Defense Logistics Agency Prepared By: CACI Enterprise Solutions, Inc. 50
LDS emarket. Section 8 - Submitting an Order
LDS emarket Section 8 - Submitting an Order Submitting an Order After checking out of LDS emarket, completion of the order occurs on the Checkout - Review and Submit page. 28 Review/enter the following
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
*TB 9-6625-2297-24 DEPARTMENT OF THE ARMY TECHNICAL BULLETIN CALIBRATION PROCEDURE FOR POWER METER AGILENT, MODEL 437B Headquarters, Department of the Army, Washington, DC 8 November 2007 Distribution
THE NATIONAL SHIPBUILDING RESEARCH PROGRAM
SHIP PRODUCTION COMMITTEE FACILITIES AND ENVIRONMENTAL EFFECTS SURFACE PREPARATION AND COATINGS DESIGN/PRODUCTION INTEGRATION HUMAN RESOURCE INNOVATION MARINE INDUSTRY STANDARDS WELDING INDUSTRIAL ENGINEERING
a. DLMSO memorandum dated January 22, 2007, subject: ADC 225, DOD WebSDR Requirement for Information Copy
ADC 225B DOD WebSDR Requirement for Information Copy New Reply Codes 1. Originator a. Service/Agency: DLA b. Originator: Ellen Hilert, DLMSO, DOD SDR System Administrator, phone: DSN 427-0676 / Commercial
Department of Defense Past Performance Information Retrieval System- Statistical Reporting Next Generation (PPIRS-SR NG)
Department of Defense Past Performance Information Retrieval System- Statistical Reporting Next Generation (PPIRS-SR NG) PPRS-SR NG User Access Naval Sea Logistics Center Portsmouth Bldg. 153-2 Portsmouth
Vectory Management Console User Manual
Distance Support Customer Relationship Management Vectory Management Console User Manual July 19, 2012 Table of Contents Table of Contents... 2 Figures... 2 Points of Contact... 3 1 Overview... 4 1.1 Accessing
PDREP Production Publish 23 January 2016 The following CSRs are included in release Version:
PDREP Production Publish 23 January 2016 The following CSRs are included in release Version: 5.0.26 FEEDBACK S/N PROGRAM TITLE CHANGE NARRATIVE 1100634 PQDR Mandatory Contract & Requisition Entry For Navy
NAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM ITEM NO: 009-99 DATE: 17 JAN 2013 CATEGORY: I 1. SCOPE: 1.1 Title: Ship Departure Report; provide 2. REFERENCES: 2.1 None. 3. REQUIREMENTS: 3.1 Provide the following completion data,
OTHER 63029G AMCOM SUPPLEMENT MIL-PRF-63029G DTD AND FOSI SUPPLEMENT
OTHER 63029G AMCOM SUPPLEMENT MIL-PRF-63029G DTD AND FOSI SUPPLEMENT HOW TO USE THE ARMY S MIL-PRF 63029G DTD AND FOSI(S) Version 5.4 DISTRIBUTION STATEMENT A: Approved for public release; distribution
PHILADELPHIA POLICE DEPARTMENT DIRECTIVE 7.11
PHILADELPHIA POLICE DEPARTMENT DIRECTIVE 7.11 Issued Date: 08-18-06 Effective Date: 08-18-06 Updated Date: SUBJECT: RECORDS RETENTION AND DISPOSITION PROTOCOL 1. POLICY A. The Commanding Officer, Reports
3.5 inch Hard Drive Enclosure. Model #: HDE350U. User s Manual
3.5 inch Hard Drive Enclosure Model #: HDE350U User s Manual 2 Rev. 060811 User s Record: To provide quality customer service and technical support, it is suggested that you keep the following information
3.5 inch Hard Drive Enclosure. User s Manual
3.5 inch Hard Drive Enclosure Model #: HDE355U User s Manual Rev. 060811 User s Record: To provide quality customer service and technical support, it is suggested that you keep the following information
ABB Network Partner. User s Manual CAP/REx 500*2.0
User s Manual CAP/REx 500*2.0 This manual belongs to: Contents Chapter Page About this manual 1 Introduction 3 Instructions 7 References 15 Customer feedback report 17 Software Registration Form 19 Index
Functional Performance Specification for an External Computer System Simulator
Technical Report CMU/SEI-88-TR-025 ESD-TR-88-026 Functional Performance Specification for an External Computer System Simulator B. Craig Meyers Hans Mumm October 1988 Technical Report CMU/SEI-88-TR-025
INTERNATIONAL TELECOMMUNICATION UNION
INTERNATIONAL TELECOMMUNICATION UNION Radiocommunication Bureau (Direct Fax N. +41 22 730 57 85) Circular Letter CR/337 10 September 2012 To Administrations of Member States of ITU Subject: Submission
HPE Factory Express Customized Integration with Onsite Startup Service
Data sheet HPE Factory Express Customized Integration with Onsite Startup Service HPE Lifecycle Event Services HPE Factory Express Customized Integration with Onsite Startup Service (formerly known as
Product Data Reporting and Evaluation Program (PDREP) Automated Information System (AIS) Supply Discrepancy Report (SDR) Application
Product Data Reporting and Evaluation Program (PDREP) Automated Information System (AIS) Supply Discrepancy Report (SDR) Application User Guide Updated: October 2017 TABLE OF CONTENTS FORWARD... 3 INTRODUCTION...
END OF YEAR PROCESSING
2017 END OF YEAR PROCESSING www.ncpsolutions.com CONTENTS Enclosed please find the following items pertinent to defining 2017 End of Year processing requirements: CRITICAL DATES GENERAL INFORMATION - End
CGI Deliverables Approval and Maintenance Process
CGI Management CGI Deliverables Approval and Maintenance Process Approved 02 September 2011 1. Introduction The following describes the official approval and maintenance process for the Common Global Implementation
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-28840/12F 14 November 2013 SUPERSEDING MIL-DTL-28840/12E 23 October 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP
MILITARY HANDBOOK FIBER OPTIC SHIPBOARD CABLE TOPOLOGY DESIGN GUIDANCE
METRIC 22 May 1996 SUPERSEDING MIL-STD-2051(SH) 21 April 1994 MILITARY HANDBOOK FIBER OPTIC SHIPBOARD CABLE TOPOLOGY DESIGN GUIDANCE AMSC N/A AREA GDRQ DISTRIBUTION STATEMENT A. Approved for public release;
ATTACHMENT W SYSTEM PROTOTYPE FIGURES 1-7
ATTACHMENT W SYSTEM PROTOTYPE FIGURES 1. FIGURE 1: Application Switchboard The primary application screen 1-7 ATTACHMENT X MINIMUM SUBMITTAL REQUIREMENTS AND QUALIFICATIONS (Provided for informational
RealPresence Platform Director
RELEASE NOTES Software 1.7.0 July 2014 3725-66007-001 Rev B RealPresence Platform Director Polycom, Inc. 1 Copyright 2014, Polycom, Inc. All rights reserved. No part of this document may be reproduced,
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Originator Processing and PQDR Submission User Guide
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Originator Processing and PQDR Submission User Guide User Guide October 2017 TABLE OF CONTENTS TABLE OF CONTENTS
DTI HEAVYWEIGHT HIGH IMPACT (H.I.) SHOCK TEST REPORT
DTI HEAVYWEIGHT HIGH IMPACT (H.I.) SHOCK TEST REPORT July, 2003 Dynamic Testing A Division of DTI Holdings, LLC P.O. Box 494, 3915 Sunnymeade Rd., Rustburg, VA 24588 434-846-0244 dti@dynatest.net TABLE
REQUEST FOR QUOTE (RFQ):
TO: FROM: PRINTERS Chad Thompson Procurement Manager Town of Longmeadow 735 Longmeadow Street, Suite 101 Longmeadow, MA 01106 Phone: 413-565-4136 Fax: 413-565-4372 cthompson@longmeadow.org DATE: November
OSC Cartoon_1 In Law (4"x6" two-sided card) OSC Cartoon_2 Video Game (4"x6" two-sided card) OSC Cartoon 3 LCPO (4"x6" two-sided card)
1 2 3 4 Decide which products and how many you want - Enter numbers in the order column. For packaged products please also enter TOTAL requested, i.e. 2 packs x 50 = 100 A. Contact your Logistics Specialists
Govs e-shop Training - Requestor 11/8/2013
Govs e-shop Training - Requestor 1 A requestor is a person who can create and submit a cart of the needed items. The cart can be created three (3) ways. Hosted Catalog Punch-out Catalog Non-Catalog Item
The Co-operatives Act, 1996 Continuance (Jurisdictional)
Section 1: Entity Details Name Reservation Number: Reserved Entity Name: Has the entity ever been extra-provincially registered in Saskatchewan? Yes (do not complete Section 2) Entity Number in Saskatchewan:
EDI Guide - Appendix T 861 Receiving Advice/Acceptance Certificate (From Navy ERP/ILSMIS to irapt)
EDI Guide - Appendix T 861 Receiving Advice/Acceptance Certificate (From Navy ERP/ILSMIS to irapt) Version 5.12.0 July 2018 Prepared For: Defense Logistics Agency Prepared By: CACI Enterprise Solutions,
RRD43 CD-ROM Disc Drive Installation Guide for MicroVAX 3100 and VAX 4000 Model 100 Systems
RRD43 CD-ROM Disc Drive Installation Guide for MicroVAX 3100 and VAX 4000 Model 100 Systems Order Number: EK RRDVX IN. A01 Digital Equipment Corporation Maynard, Massachusetts First Printing, March 1994
NGMMC RS-TOPS. User Handbook. Version 1.0 Prepared By KYLOC. 1 May 2005
NGMMC RS-TOPS User Handbook Version 1.0 Prepared By KYLOC 1 May 2005 Updated: 21 July 2009 PREFACE This User Handbook provides the detailed information needed by POC level personnel ordering military materiel
Reference Edge / First Edge
Reference Edge / First Edge We make every effort to ensure the content of our documentation is complete, accurate and up to date. However, continuous development of the described software means it is not
Internal Cabling Guide for the HP Smart Array 6400 Series Controller on an HP Integrity Server rx7620
Internal Cabling Guide for the HP Smart Array 6400 Series Controller on an HP Integrity Server rx7620 May 2004 (Second Edition) Part Number 5990-8201 2004 Hewlett-Packard Development Company, L.P. Microsoft
Frequently Asked Questions
Host Test Kit: DD Application Test Module Frequently Asked Questions GENERAL QUESTIONS What is the Host Test Kit: DD Application Test Module? 2 What can I do with the Host Test Kit? 2 What are the benefits
MobileFlex Version 1.0 Portable Technology Solutions, LLC
MobileFlex Version 1.0 Portable Technology Solutions, LLC Telephone: 1-877-640-4152 Fax: 1-501-421-5085 http://www.ptshome.com support@ptshome.com This document and the software described by this document
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Local Purchase Processing
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Local Purchase Processing User Guide July 2018 TABLE OF CONTENTS FORWARD 1 1 VIEWING THE WORKLIST 3 2 INITIATING
MILITARY STANDARD CONTRACTOR INTEGRATED TECHNICAL INFORMATION SERVICE (CITIS)
NOT MEASUREMENT SENSITIVE MIL-STD-974 20 August 1993 MILITARY STANDARD CONTRACTOR INTEGRATED TECHNICAL INFORMATION SERVICE (CITIS) AMSC D6943 AREA IPSC Distribution Statement A: Approved for public release;
DETAIL SPECIFICATION SHEET
METRIC MIL-DTL-83538/11C 7 January 2015 SUPERSEDING MIL-DTL-83538/11B 30 October 2006 DETAIL SPECIFICATION SHEET CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ADAPTER, BUFFER PLUG, NON-REMOVABLE
ARIMS Website: https://www.arims.army.mil
AR 25-400-2, 2 Oct 07 The Army Records Information Management System (ARIMS) Directorate of Human Resources Administrative Services Division DA Pam 25-403, 20 Dec 06 Guide to Recordkeeping in the Army
MPhil, PhD & DBA Thesis Submission Guide
MPhil, PhD & DBA Thesis Submission Guide Design Print Web 1 This Guide aims to assist MPhil, PhD, DBA Students submitting their thesis for printing and binding. This should be used in conjunction with
Engineering and Scientific Subroutine Library for AIX, Version 4 Release 2. Installation GA
Engineering and Scientific Subroutine Library for AIX, Version 4 Release 2 Installation Guide GA22-7886-01 Engineering and Scientific Subroutine Library for AIX, Version 4 Release 2 Installation Guide
EDI Guide - Appendix W 527R - Receipt
EDI Guide - Appendix W 527R - Receipt Version 5.12.2 November 2018 Prepared For: Defense Logistics Agency Prepared By: CACI Enterprise Solutions, Inc. 50 North Laura Street, Suite 2100 Jacksonville, FL
Municipal Assessment and Property Charges Online (MAPCO) User s Manual
Municipal Assessment and Property Charges Online (MAPCO) User s Manual TABLE OF CONTENTS INTRODUCTION... 3 About This Manual... 3 REGISTERING FOR MAPCO... 4 Online Form... 4 Manual Form... 4 Changing Your
Team Member Guide: Viewing and Recording your development plan
Team Member Guide: Viewing and Recording your development plan Adding development objectives This guide provides a general overview on how to view and record your development objectives. For ACP Team Member
Medical records movement
England Primary Care Support England Medical records movement A guide for general practice staff to the new process 1. Receiving records 2. Sending records 3. Returning temporary resident forms What s
Application Guideline for BOP/Volume Zone Business Support Coordinator UZBEKISTAN in FY 2015
Application Guideline for BOP/Volume Zone Business Support Coordinator UZBEKISTAN in FY 2015 April 7, 2015 Manabu Shimoyashiro President Director JETRO Tashkent The Japan External Trade Organization, JETRO
Staff Workstation Model 795
Staff Workstation Model 795 Site Planning Guide 3M Library Systems 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 www.3m.com/library Copyright 2000-2001, 2004 3M IPC. All rights reserved.
City of Aurora. Development Review Plans Submission and Referral Website. Public and Agency Referral Instruction Guide
City of Aurora Development Review Plans Submission and Referral Website Public and Agency Referral Instruction Guide Table of Contents Introduction... 3 Project Search (Public only)... 4 Project Search
****This form is to be filled out by the candidate.****
SSPC Use Only Date Verified Work Ex. Date Verified Edu. Application Form SSPC Coating Application Specialist (CAS) - Level 2 Certification Program (Full Status) ****This form is to be filled out by the
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Originator Processing and PQDR Submission
Product Data Reporting and Evaluation Program (PDREP) Product Quality Deficiency Report (PQDR) Originator Processing and PQDR Submission User Guide Updated: 26 Feb 2014 TABLE OF CONTENTS TABLE OF CONTENTS
Version 8.5 PENTAGON 2000 SOFTWARE. iphone Apps
Version 8.5 PENTAGON 2000 SOFTWARE Pentagon 2000 Software 15 West 34 th Street 5 th Floor New York, NY 10001 Phone 212.629.7521 Fax 212.629.7513 TITLE: PART: General System MODULE: BUILD N/A RESPONSIBILITY:
Labels and Keys for Tactile Graphics
Labels and Keys for Tactile Graphics How is a tactile graphic labeled? A tactile can be most quickly read when: 1. the labels are placed directly on the tactile graphic, on (or in) the data being identified;
NESSO QUICKSTART GUIDE
Fleet Numerical Meteorology and Oceanography Center NESSO QUICKSTART GUIDE REGISTRATION AND USE April 20, 2007 Version 2.04 Approved for public release; distribution is unlimited Navy Enterprise Single
The Chinese University of Hong Kong Office of University General Education. GE Course Proposal and Inventory System (GECPI) Departmental User Guide
The Chinese University of Hong Kong Office of University General Education GE (GECPI) November 2017 Table of Content Table of Content... 2 1 Introduction... 3 1.1 Main Features... 3 1.2 Management and
LabelWriter. Print Server. User Guide
LabelWriter Print Server User Guide Copyright 2011 Sanford, L.P. All rights reserved. 04/11 No part of this document or the software may be reproduced or transmitted in any form or by any means or translated
Polycom Acoustic Fence and Polycom Acoustic Fence with Beam Shaping Technology
TECHNICAL BULLETIN November 2017 3725-84091-002A Polycom Acoustic Fence and Polycom Acoustic Fence with Beam Shaping Technology Introduction Polycom Acoustic Fence and Polycom Acoustic Fence with Beam
DOCTOR OF PHYSICAL THERAPY PROGRAM HOW TO COMPLETE THE GRADMIT APPLICATION: AN INSTRUCTIONAL GUIDE
DOCTOR OF PHYSICAL THERAPY PROGRAM HOW TO COMPLETE THE GRADMIT APPLICATION: AN INSTRUCTIONAL GUIDE 1 APPLICANT TIPS: REFER TO THIS DOCUMENT WHILE COMPLETING YOUR APPLICATION. START EARLY! UB STUDENTS:
epubs Ordering Portal
epubs Ordering Portal User Guide Army Publishing Directorate 31 July 2017 Table of Contents I. Overview... 1 II. Ordering Portal Functionality... 2 Access and Login... 2 Find Product... 5 Order Product...
1. Access the Journal Entry Form via University Forms and Documents.
Creating and Submitting a Journal Entry Purpose: Journal Entries may be completed to make corrections to posted expenses to include payroll, p-card, expense reports, purchase requisitions, and local funding
July 2017 Product Shipping Configuration Change Notice
July 2017 Product Shipping Configuration Change Notice Engineering Advisory 124139 3725-47130-005 This engineering advisory provides details about configuration changes planned for July 2017 to Polycom
DEPARTMENT OF DEFENSE INTERFACE STANDARD INSERT ARANGEMENTS FOR MIL-DTL-38999, MIL-C SERIES A, AND MIL-C ELECTRICAL, CIRCULAR CONNECTORS
NOTICE OF CHANGE INCH-POUND 17 January 2003 DEPARTMENT OF DEFENSE INTERFACE STANDARD INSERT ARANGEMENTS FOR MIL-DTL-38999, MIL-C-29600 SERIES A, AND MIL-C-27599 ELECTRICAL, CIRCULAR CONNECTORS TO ALL HOLDERS
JOB SERVICE NORTH DAKOTA ELECTRONIC TAX REPORT FILING
JOB SERVICE NORTH DAKOTA ELECTRONIC TAX REPORT FILING GENERAL INFORMATION Job Service North Dakota (JSND) accepts contribution and wage reports electronically via the following methods: Secure FTP (File
DataPort 350 & 525 USB 2.0 and FireWire Enclosure User s Guide (800)
DataPort 350 & 525 USB 2.0 and FireWire Enclosure User s Guide WWW.CRUINC.COM (800) 260-9800 TABLE OF CONTENTS PAGE Package Contents 1 Features and Requirements 2 Installation 6 Trouble Shooting 16 Technical
BRIEF OF PROPOSAL APP MOD DIS OTH. new proposal/disaproved during SSRAC under another CP. Delete the sentence "Invoke SI for fasteners" E34
ACTION TAKEN Serial # COMM ITEM PARA or PAGE BRIEF OF PROPOSAL APP MOD DIS OTH P001 009-74 4.7 P002 009-01 3.15.1 P003 P004 P005 P006 P007 Typo in 4.7 (change 009-120 of 2.2. to 119-120 of 2.1 This wording
ISO 4090 INTERNATIONAL STANDARD. Photography Medical radiographic cassettes/screens/films and hard-copy imaging films Dimensions and specifications
INTERNATIONAL STANDARD ISO 4090 Third edition 2001-08-15 Photography Medical radiographic cassettes/screens/films and hard-copy imaging films Dimensions and specifications Photographie Cassettes/écrans/films
LCD Data Video Projector Concise User s Manual
LCD Data Video Projector Concise User s Manual ModelS 8928A, 8930A, 8931WA Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software please
CD-ROM COMPATIBLE TAPE FORMAT FOR INSTALLABLE FILE SYSTEM
QIC-174 Revision A 21 Mar 96 CD-ROM COMPATIBLE TAPE FORMAT FOR INSTALLABLE FILE SYSTEM (See important notices on the following page) Important Notices This document is a development standard adopted by
SUBJECT: CHAMPION AEROSPACE SLICK SERVICE BULLETIN SB1-12
CONTINENTAL MOTORS, INC AIRCRAFT ENGINE SERVICE BULLETIN Compliance Will Enhance Safety SUBJECT: CHAMPION AEROSPACE SLICK SERVICE BULLETIN COMPLIANCE: As outlined in Slick compliance section Category 3
V23 Basic User Guide
UNCLASSIFIED // FOR OFFICIAL USE ONLY V23 Basic User Guide Distribution authorized to U.S. Government Agencies only, to protect SLDCADA technical or operational data, computer software, and documentation