SPIRAL WOUND GASKET. Spiral Wound Gasket CALVOSEALING DESCRIPTION PROPERTIES
|
|
- Leon Charles
- 6 years ago
- Views:
Transcription
1 CALVOSEALING Spiral Wound Gasket SPIRAL WOUND GASKET DESCRIPTION Spiral wound gaskets consist of a V-shaped metal strip spirally wound in combination with a soft, filler material. The metal strip provides strength and resiliency, while the flexible filler guarantees an excellent sealing. The combination of these materials provide to the spiral wound gaskets an excellent sealing properties under fluctuating temperature and pressure conditions. Depending on the application, the spiral wound gaskets can be manufactured with outer and/or inner rings. PROPERTIES Spiral wound gaskets can be used to seal fluid pressures up to 50 bar and from cryogenic temperatures up to elevated temperatures to 000º (8 ºF). By combining different winding materials and metals, the gasket can be tailored to suit a wide variety of operating conditions. The gasket is easily removed and will not damage flange surfaces. The outer guide ring simplifies assembly and prevents blow out of the gasket.
2 Spiral Wound Gasket SPIRAL WOUND GASKETS TYPES CALVO SEALING S Spiral Wound Gaskets are available in the following formats: ICP SM0 The gasket is composed of V shape metal strip with different kind of soft fillers. ICP SM0 The gasket contains a solid metal inner ring, where the insertion facilitates the installation and prevents gasket blow-out. ICP SM0 The gasket consists of a solid metal outer ring which is used as centering device and stop. Designed for use in general services. ICP SM05 The gasket contains a solid metal outer and inner ring, where the inner ring insertion acts like additional compression limiter. Specially designed for resist high pressure and temperature services and aggressive media.
3 Spiral Wound Gasket CHARACTERISTICS OF METALLIC MATERIALS IDENTIFICATION Outer Ring Filler Material Inner Ring SIZE ACCORDING TO REGULATIONS FILLER MATERIAL SPIRAL WOUND GASKET TYPE NOMINAL DIAMETER AND PRESSURE
4 Spiral Wound Gasket CHARACTERISTICS OF FILLER MATERIALS FLEXIBLE GRAPHITE High purity flexible graphite with no binders or fillers. This provides an excellent sealability and excellent resistance to a wide range of chemicals. Its unique combination of low permeability, inherent lubricity and compressibility makes this material be suitable for critical gas and vacuum services. POLYTETRAFLUORETHYLENE (PTFE) PTFE is used as a filler material in gaskets where extreme chemical inertness is required. PTFE is unaffected by any known chemicals except molten alkali metals and fluorine precursors. Because of its low permeability, PTFE is also frequently used as a filler material on CALVOSEALING gaskets in vacuum applications. Spiral wound gaskets with PTFE should be fully confined, either by fitting in a groove or providing both an external and internal ring. CERAMIC Consists of an aluminum silicate fiber with an organic binder. This material possesses a lower sealability compared to other filler materials, however it has excellent high temperature stability to 50 C (00 F). Resists attack from most corrosive agents (except hydrofluoric and phosphoric acids) as well as concentrated alkalis. Recommended only where conditions preclude the use of exfoliated vermiculite. EXFOLIATED VERMICULITA Chemically and thermally composed by exfoliated vermiculite makes it an excellent filler material for use in spiral wound gaskets. This natural mineral has an structure that simulates to exfoliated graphite, with one notable exception it maintains sealing integrity through a wide range of extreme temperatures. It exhibits exceptional chemical resistance. This material is versatile, fire safe and is not susceptible to oxidation. MATERIAL TEMPERATURE MAX. OPERATI- GAS Min. Max. VE PRESSURE TIGHTNESS APPLICATION Flexible Graphite -0 ºC / 00 ºF 50 ºC / 950 ºF 50 bar Good Aggressive media PTFE -00 ºC / -8 ºF 60 ºC / 500 ºF 00 bar Good Aggressive media Ceramic -0 ºC / -50 ºF 60 ºC / 00 ºF 00 bar Low High temperature Exfoliated Vermiculita -0 ºC / 00 ºF 00 ºC / 0 ºF 00 bar Low High temperature SELECTION GUIDE Flat Face (FF) Raised Face (RF) Male & Female Tongue & groove Flat face to recess FLANGE FACE Normal Conditions ICP SM0 ICP SM0 ICP SM0 ICP SM0 ICP SM0 High pressure High temperature PTFE filled gasket Corrosive conditions ICP SM05 ICP SM05 ICP SM0 ICP SM0 ICP SM0
5 Dimensions: Spiral Wound Gasket SPIRAL WOUND GASKET DIMENSION TO EN 5- / DIN 690 ( used with EN 09 flanges ) SPIRAL WOUND GASKET DIMENSION TO ASME B6.0 ( used with BS 560 & ASME/ANSI B6.5 flanges ) SPIRAL WOUND GASKET DIMENSION TO ASME B6.0 ( used with ASME/ANSI B 6.7 Series A flanges ) SPIRAL WOUND GASKET DIMENSION TO ASME B6.0 ( used with ASME/ANSI B 6.7 Series B flanges ) SPIRAL WOUND GASKET DIMENSION TO BS 8 ( used with BS 560 / ASME B 6.5 flanges) SPIRAL WOUND GASKET DIMENSION TO JIS ( para bridas JIS Presión Nominal 0 Kg f /cm - 0 Kg f /cm ) 55
6 SPIRAL WOUND GASKET DIMENSION TO EN 5- / DIN 690 ( used with EN 09- gasket ) INNER RING SEALING ELEMENT OUTER RING d d d d
7 SPIRAL WOUND GASKET DIMENSION TO ASME B6.0 ( used with BS 560 & ASME/ANSI B6.5 flanges ) Inside Diameter - d ½..... ¾ ¼ ½ ½ , SEALING ELEMENT OUTER RING Inside Diameter - d d Outside Diameter - d ½ ¾ ¼ ½ ½
8 SPIRAL WOUND GASKET DIMENSION TO ASME B6.0 ( used with ASME/ANSI B 6.7 Series A flanges ) Inside Diameter - d , 5,7 68, 6, 9, SEALING ELEMENT Inside Diameter - d / Outside Diameter - d ID OD ID OD ID OD ID OD ID OD 50 OUTER DIAMETER Outside Diameter - d
9 SPIRAL WOUND GASKET DIMENSION TO ASME B6.0 ( used with ASME/ANSI B 6.7 Series B flanges ) Inside Diameter - d SEALING ELEMENT Inside Diameter - d / Outside Diameter - d ID OD ID OD ID OD ID OD ID OD 50 OUTER DIAMETER Outside Diameter - d
10 SPIRAL WOUND GASKET DIMENSION TO BS 8 ( used with BS 560 / ASME B 6.5 flanges ) SEALING ELEMENT OUTER RING d d d d ½ ¾ , ¼ ½ ½ , TOLERANCES Inner Ring Sealing Element Outer Ring
11 SPIRAL WOUND GASKET DIMENSION TO JIS ( used with JIS - Nominal Pressure0 Kg f /cm - 0 Kg f /cm flanges ) NOMINAL PRESSURE 0 Kg f /cm INNER RING SEALING ELEMENT OUTER RING d d d d NOMINAL PRESSURE De 6 a 0 Kg f /cm SEALING ELEMENT OUTER RING d d d d
12 SPIRAL WOUND GASKET DIMENSION TO JIS ( used with JIS - Presión Nominal 0 Kg f /cm - 6 Kg f /cm flanges ) NOMINAL PRESSURE 0 Kg f /cm SEALING ELEMENT OUTER RING d d d d NOMINAL PRESSURE 0 Kg f /cm SEALING ELEMENT OUTER RING d d d d NOMINAL PRESSURE 6 Kg f /cm d d SEALING ELEMENT d OUTER RING d
13 C/Galileo 8 - P.I. Can Estella 0865 Sant Esteve Sesrovires (Barcelona) Tel Fax info@calvosealing.com REVIEW 09/6/0
SPIRAL G.P. GASKETS. Wound Gaskets. Leader in Gasket Provider
SPIRAL Wound Gaskets Overview G.P.Gaskets is offering a full range of Spiral Wound Gaskets. The objective is to make available in India, Spiral Wound Gaskets manufactured to the most exacting international
More informationPISTON SEALS BECA
PISTON SEALS BECA 500-502-504 DESCRIPTION The BECA 500-502 - 504 profiles are double acting composite piston seals composed of a filled PTFE friction ring and pre-tightened rubber O'Ring. They can be assembled
More information259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: Fax:
259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: 01276 600200 Email: info@nfi.uk.com Fax: 01276 600161 NFI UK LTD NFI UK Harsh Environment Fibre Optic Connectors NFI UK harsh environment connectors
More informationSHORT PATTERN FLANGE BALL VALVES 5000 SERIES
SHORT PATTERN FLANGE BALL VALVES 5000 SERIES Jarecki 5000 Series metal seated ball valves with the Phantom Port incorporate the most innovative design in ball valves today. Proven in the field, they provide
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationThis is an economic model, especially suitable for instruments with ¼ port connection. Not detachable to repair.
Diaphragm seals - Stainless steel d. seals ¼ - PVC diaphragm seals ¼ - Stainless steel d. seals ½ - PVC diaphragm seals ½ - Easy-to-clean diaphragm seals - High pressure diaphragm seals - Low pressure
More informationAS-568B Standard O-Rings Quick Reference Chart
AS-568B Standard O-Rings Quick Reference Chart General Applications Apple O-Rings are available in a choice of seven basic materials (1) each in a range of optional Durometer (Shore A) Hardnesses. Other
More informationSMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS
SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. ULLETIN 13.01-02 ugust 2009 PERMSEL PLU VLVES TEHNIL SPEIITIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. Materials of onstruction ody & over arbon Steel
More informationUser Manual TEMES Version 7.xx Advanced Services GmbH Hoher Steg Lauffen/N.
TEMES Version 7.xx Advanced Services GmbH Hoher Steg 13 74348 Lauffen/N. www.amtec.eu January 2014 table of contents Page 2 1 Introduction... 4 2 Installing the software TEMES fl.cal... 4 2.1 Software
More informationBELLOWS COVERS AND.
BELLOWS AND COVERS www.joycedayton.com BELLOWS AND COVERS REDUCE EXPENSIVE MAINTENANCE AND DOWN TIME Protect your Equipment Investment When bellows and covers are fitted to machinery, expensive maintenance
More informationModel VDL 115 Vacuum drying chambers for flammable solvents
Model VDL 115 Vacuum drying chambers for flammable solvents A BINDER safety vacuum drying oven of the VDL series ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber
More informationTECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17
TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.
More informationModel VD 23 Vacuum drying chambers for non-flammable solvents
Model VD 23 Vacuum drying chambers for non-flammable solvents A BINDER vacuum drying oven VD series gently dries materials with homogeneous temperature distribution. The patented expansion shelf technology
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More informationVonk Choke Valve. Flow Control. Features and benefits. Product overview. General applications. Technical data. Model CHV (Angle Body)
Vonk hoke Valve Model HV (ngle ody) Flow ontrol Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability
More informationExcellent in separation of two different fluids under pressure Compact design and groove structure allow interchangability with the Hallite P54
PISTON SEAL Double-Acting TECHNICAL DETAILS The Hallite GPS is a double-acting piston seal utilizing Hallite s high-performance Armorlene HLX PTFE paired with an elastomer energizer and x-ring for optimum
More informationVAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES
VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES
More informationFusion of electronic pressure sensor and analogue display.
Fusion of electronic pressure sensor and analogue display. Pressure sensors www.ifm.com/gb/pg fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control
More informationLevel gauges Series LS Level indicator, switch and transmitter for liquids
Level gauges Series LS Level indicator, switch and transmitter for liquids Simple construction Resistant under extreme temperature and pressure conditions No risk of leakage Measuring range: from 150 mm
More informationThermowell for Screwing
Accessories - KC0126-2013/09 Thermowell for Screwing Nominal pressure PN160. Inner bore diameter 9 mm. WT70 C 01 Temperature cylindrical thermowell for screwing, PN160 V900 9 Z01 M20x1. 5 P02 M27x2 Code
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationCannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationAdapter system for measuring instruments with G1 hygienic connection Model process adapter
Accessories Adapter system for measuring instruments with G1 hygienic connection Model 910.61 process adapter WIKA data sheet AC 09.20 Applications Food, beverage and pharmaceutical industry Cosmetics
More informationAir Permeability Tester FX 3300 LABOTESTER III
Air Permeability Tester FX 3300 LABOTESTER III SCOPE The TEXTEST Air Permeability Tester FX 3300 LABOTESTER III is used for fast, simple, and accurate determination of the air permeability of all kinds
More informationInsertion RTD temperature probe
Data sheet 902350 Page 1/6 For temperatures between -50 and +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measuring points Due
More informationJAN 16 Rev B
ANSI C136.41-2013 Rotatable Dimming Receptacles Application Specification 20 JAN 16 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationDaniel Senior Orifice Fitting Differential Pressure Flow Meters. Technical Guide May 2013
Daniel Senior Orifice Fitting Differential Pressure Flow Meters Technical Guide May 2013 Differential Pressure Flow Meters Technical Guide Proving its worth every day Overview The Daniel Senior Orifice
More informationFloat Switches with Permanent Magnet For Vertical Installation Model RSM
Level Measurement Float Switches with Permanent Magnet For Vertical Installation Model RSM WIKA Data Sheet LM 30.01 Applications Level measurement for almost all liquid media Pump/level control and monitoring
More informationData is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
More informationSpecification. Radiamatic Detectors and Accessories
4/92 Page 1 of 8 Radiamatic Detectors and Accessories Specification Function The Radiamatic temperature detector generates an emf proportional to the temperature of the object sighted. It is used with
More informationVonk Choke Valve. Flow Control. Features and benefits. Product overview. Technical data. General applications. Model YCV (Y-Type body)
Flow Control Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging applications.
More informationselection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
More informationTelephony Multi-Taps. 9000T-TP Series
9000T-TP Series The 9000T-TP series 1 GHz twisted-pair power multi-tap taps off part of its input RF and AC, but lets the rest pass through. It divides the tapped-off signal and power into multiple outputs,
More informationCode Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
More informationMating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationFOR TUBE FITTINGS OR-910N OR-910NA 5/8" 7/8" ".097" 11/16".863".116" 318-A02-1C. STOCKED O-RINGS in SPECIAL COMPOUNDS
FOR TUBE FITTINGS O-Ring Seals - Nitrile / Neoprene oints toriques d'étanchéité nitrile / néoprène can supply the right NITRILE O-Ring to suit YOUR purpose. The Nitrile O-Rings listed below are made especially
More informationThermocouple Technology, Inc.
Series E End Cap Series - Manufacturing Standard Valid only for Overall Length L maximum of 24" and/or one-piece construction barstock *NOTICE: TTEC provides a one piece construction machined barstock
More informationNEW NEW. Diaphragm agm Pumps MPC for Chemical Applications MPC 301 E. MPR 060 E with power pack
Diaphragm agm Pumps MPC for Chemical Applications The diaphragm pumps for chemical applications -Type MPC- are resistant to aggressive solvents and acidic vapors typically used in laboratory processes.
More informationInch / Cross Type Metric Section Style Material Page. Inch Deep Style 92 Durometer Urethane with 70 Durometer Nitrile Energizer
Hydraulic Seals Inch / Cross Type Metric Section Style Material Page Standard 92 Durometer Urethane 7-11 with 70 Durometer Nitrile Energizer Inch Deep Style 92 Durometer Urethane 12-16 with 70 Durometer
More informationFusion of electronic pressure sensor and analogue display.
Fusion of electronic pressure sensor and analogue display. Pressure sensors www.ifm.com/gb/pg fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control
More informationStandard Series Standard
Standard Series Standard Technical Data Coupler connector, cable connector and coupler connector rectangular housing Locking screw connection Protection IP 50 to IP 54 with conexil in the housing, flat-gasket
More informationDeclaration of Performance (DOP)
Declaration of Performance (DOP) No. 9174 015 DOP 2018-01-08 1. Unique identification code of the product-type: Multi-wall chimney system type DW-ECO-TITAN according to 2. Type, batch or serial number
More informationQuality Since 1935 SERIES EXPANSION JOINTS WON T
1-00-25-00 Quality Since 135 SERIES 0EZ EXPANSION JOINTS THEY PERFORM LIKE WON T YOU BELIEVE THE EVOLUTION OF ELASTOMERIC EXPANSION JOINT STYLES Standard Arch (The 130 s) Flowing Arch (The 170 s) Wide
More informationSPDS SERIES. Ultra-High Purity Diaphragm Valves (SPDS) Pneumatic Diaphragm Valves (SPDSA) Dual Containment Diapgragm Valves (DCS)
SPDS SERIES Ultra-High Purity Diaphragm Valves (SPDS) Pneumatic Diaphragm Valves (SPDSA) Dual Containment Diapgragm Valves (DCS) SPDS SERIES This SPDS (diaphragm design) valve series is intended for bulk
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
More informationDAIKIN GAS TIGHT JOINT (DGT)
LINE UP Model Name Size (mm) DAIKIN GAS TIGHT JOINT (DGT) SPECIFICATIONS BDGTA06 ø 6.4 BDGTA06 ø 9.5 BDGTA12 ø 12.7 BDGTA15 ø 15.9 BDGTA19 ø 19.1 BDGTA22 ø 22.2 BDGTA28 ø 28.6 DAIKIN GAS TIGHT JOINT Applicable
More informationProgrammable. Precise. Easy Assembly. Programmable Magnetic Switch MMS PI2 MMS PI2. Field of Application. Advantages Your benefit
MMS PI2 Programmable. Precise. Easy Assembly. Programmable Magnetic Switch MMS PI2 Magnetic switches are used for monitoring the position of automation components. They detect the approach of a magnet
More informationEPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
More informationComposite Type Rupture Disc
Composite Type Rupture Disc 2-2202-2 COMPOSITE* TYPE RUPTURE DISC What is a Composite Type Rupture Disc? A Composite Type Rupture Disc is a differential pressure relief device used to protect pressurized
More informationGas-actuated thermometer Stainless steel version Model 73
Temperature Gas-actuated thermometer Stainless steel version Model 73 WIKA data sheet TM 73.01 for further approvals see page 15 Applications General process instrumentation in the chemical and petrochemical
More informationC200 VALVE WITH UM ELECTRIC ACTUATOR
FEATURES The C200+UM Ball-valves guarantee the function of automatic shut-off of pipes made of PVC-U, PEHD, PP or PVDF. This PN10/16 pressure class valve is used to isolate low-pressure water, acid or
More informationFX 3300 Air Permeability Tester III Scope
FX 3300 Air Permeability Tester III Scope The TEXTEST FX 3300 Air Permeability Tester III is used for fast, simple, and accurate determination of the air permeability of all kinds of flat materials and
More informationCatalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
More informationRTD insertion temperature probes
Data sheet 902350 Page 1/6 for temperatures from -50... +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measurement points Due to
More informationGrease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
More informationSYSTEM COMPONENT SERIES. Ultra-High Purity Check Valves (CB/CVV) Ultra-High Purity Check Valve (2048) Ultra-High Purity Vacuum Generators (2028)
SYSTEM COMPONENT SERIES Ultra-High Purity Check Valves (CB/CVV) Ultra-High Purity Check Valve (2048) Ultra-High Purity Vacuum Generators (2028) CB SERIES The CB stainless steel check valve series is intended
More informationBellows. Technical Principles Bellows
Technical Principles Bellows Bellows Technical Principles Bellows 704 Use of Bellows 706 Products Products 710 Design Types 711 Freudenberg Simrit GmbH & Co. KG Technical Principles 703 Technical Principles
More informationOfficial Distributors PRINTABLE TAGS PAGE PRINTABLE TAGS CM-SCE-TP HTCM-SCE-TP HLX HLX-NEL PAGE 28
PRINTABLE TAGS PRINTABLE TAGS CM-SCE-TP PAGE 29 HTCM-SCE-TP 31 HL 33 HLX 35 HLX-NEL 37 PAGE 28 CM-SCE-TP CM-SCE-TP Cable Markers are designed to offer flexibility when it comes to wire and cable identification.
More informationSense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationSlot Resistance Thermometers
Slot Resistance Thermometers www.ephy-mess.de Contents 1. Slot Resistance Thermometer (NWT) 2 bifilar and chip type design 1.1 EPHY-MESS NWT delivery program list 2 1.2 Slot resistance thermometer with
More informationTASK-LINE GASKETS. The original is still the best.
2 TASK-LINE GASKETS The original is still the best. TASK-LINE ADVANTAGES Maximum protection Zero corrosion rate No retorquing after installation Blowout protection No fabrication or waste Reusable Non-porous
More informationHMT330 Series Humidity and Temperature Transmitters for Industrial Applications
HMT330 Series Humidity and Temperature Transmitters for Industrial Applications The HMT330 transmitter family has the solution for demanding industrial humidity measurements. Six models for demanding industrial
More informationBaumann Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationXL 4000 metal free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL metal free-standing enclosures and CONTENTS PAGE 1. General characteristics...1 2. Range...2 3. Overall dimensions...2 4. Equipment...3
More informationLevel Measurement Continuous level measurement - Ultrasonic transducers
Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance Optional foam
More informationIntroduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
More informationSAFEPLAST HOSE PROTECTORS for full protection of people and hoses SAFEPLAST always a safe choice!
SAFEPLAST HOSE PROTECTORS for full protection of people and hoses SAFEPLAST always a safe choice! CONTENTS About SAFEPLAST OY... 3 SAFE-SPIRAL... 5 SAFE-SPIRAL - TECHNICAL INFORMATION... 7 FLEX-SPIRAL...
More informationModel 685 Model 885. Model 985
Full lift safety valve with spring loading. (AIT) Model 5 Model 5 Model 95 ASME SI Units EP AP ES AS EP AP ES Model 5 Model 5 AS EP AP ES AS Model 95 The valve works as an automatic pressure releasing
More informationBall valve C 200 PROP / C 200 DOS
Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Characteristics C 00 PROP Proportional ball valve based on the C 00
More informationDeclaration of performance (DOP)
Declaration of performance (DOP) 1. Unique identification code of the product-type: No. 9174 002 DOP 2013-06-17 Multi-wall chimney system type DW-KL according to 2. Type, batch or serial number or any
More informationTech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
More informationSANITRX Rupture Discs
SANITRX Rupture Discs 4-8803 SANITRX RUPTURE DISC The SANITRX* Rupture Disc is a semicircular-scored reverse acting rupture disc designed to provide instantaneous overpressure protection in sanitary environments.
More informationSMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
More informationRSK. Wafer Type Check Valve. Construction. Features. Advantages
Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges
More informationLevel instruments. Point level measurement - Capacitance switches. Pointek CLS300 5/31
Level instruments Overview The unique modular design of the provides a wide range of configurations, process connections, extensions and approvals to meet the temperature and pressure requirements of specific
More informationAssembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
More informationbrass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
More informationEnidine Wire Rope Isolators. Wire Rope Isolators. Solutions in Energy Absorption and Vibration Isolation.
Enidine ire Rope Isolators ire Rope Isolators Solutions in Energy Absorption and Vibration Isolation. Introducing Typical ire ire Rope Rope Isolator Isolators Applications Electronic Enclosures Medi-vac
More informationControlMaster CM10, CM30, CM50 and CM15 Universal process controllers and indicator Spare parts
Parts List PL/CM EN Rev. E ControlMaster CM10, CM30, CM50 and CM15 Universal process controllers and indicator Spare parts 1Contents Overview...1 Parts identification...2 CM10...2 CM15...4 CM30...6 CM50...8
More informationThese devices require adequately trained and experienced operating personnel.
MMA, 2014 PI Ceramic GmbH PD410 Circular PICMA Bender Piezo Actuators Figure 1: Circular PICMA bender actuator (here: PD410.10) INFORMATION Before soldering, installing and operating the actuator, read
More informationWafer Handling Tools Vacuum Wands
Wafer Handling Tools Vacuum Wands C Series The material of the body is Nylon blended carbon fiber. The valve part is made of fluorocarbon resin and coated with Nylon blended carbon fiber by unique molding
More information334A. High Performance Butterfly Valves to suit API standard 150lb/300lb Rating. Double offset geometry. 50 to 600mm
High Performance Butterfly Valves to suit API standard lb/00lb Rating A Valve nominal size to 00mm Max.working pressure MPa Working temperature range 0 0 Cast steel Stainless steel.9 5. 9 FS Fire safe
More informationSTEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED
STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3
More informationOMD. 3D Force Sensor OMD-30-SA-1600N. T E C H N I C A L D A T A S H E E T v 1. 0 B E N E F I T S T E C H N I C A L D A T A
MD T E C H N I C A L D A T A S H E E T v 1. 0 3D Force Sensor MD-30-SA-1600N (product photo) B E N E F I T S T E C H N I C A L D A T A Force measurement in 3D High resolution Low chemical reactivity Highly
More informationPRODUCT SELECTION GUIDE BRAND PRODUCTS SINCE 1964 RUPTURE DISCS HOLDERS SPECIAL APPLICATIONS
SINCE 1964 PRODUCT SELECTION GUIDE RUPTURE DISCS HOLDERS SPECIAL APPLICATIONS PRODUCT SELECTION GUIDE LAMOT QUALITY RUPTURE DISCS Since 1964, the LaMOT brand of rupture discs and rupture disc holders have
More informationCool Drawer Single Sensor
The Cool Drawer Single Sensors allow crystal installation into the sensor from the side, convenient for systems with insufficient room for front load crystal installation. The Cool Drawer Single Sensor
More informationTemperature probes 468 Hans Turck GmbH & Co. KG Tel Fax Edition I/
468 Hans Turck GmbH & Co. KG Tel. +49 208 49 52-0 Fax +49 208 49 52-264 Temperature probe a Temperature probes TP series TP series Highest possible flexibility A temperature probe has to be flexible and
More informationCAPACITIVE: CONTROL CLS2 CLS4 CLS5. Applications liquids / solids liquids / solids solids / granules
CAPACITIVE: CONTROL On/Off Capacitive control is an established and extensively used level control technique. The instrument is composed of an electrode, suitable for the application, and of an electronic
More informationConnectivity Products
Cable Glands Strain Relief Snap-In Labels Lock Nuts Torque Wrench Protective Sleeves U2 U5 U5 U6 U7 U8 Features NPT and PG thread cable glands in nylon or metal materials Locknuts in multiple thread sizes
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
More informationSEMI-PREPERATIVE- and PREPARATIVE NovoGROM HPLC-Columns to 10.0 cm i.d. -
SEMI-PREPERATIVE- and PREPARATIVE NovoGROM HPLC-Columns - 0.8 to 10.0 cm i.d. - Semi-preparative- and preparative NovoGROM columns in various dimensions, made of stainless steel or glass are available
More informationSystem Accessories. features and benefits. standards. An Evolant Solutions Product
features and benefits Accessories designed specifically for the UMOXS cross-connect system Sealed plant design Wire termination tool and fixture Multi- or single-pair test probes standards UMOXS Cross-Connect
More informationDETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER FERRULE, EPOXY
METRIC MIL-DTL-83522/16C 28 June 2013 SUPERSEDING MIL-C-83522/16B 11 May 1995 DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER
More informationFront Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
More informationKatalog SC OENA ESEN_OE Prospekt SC Layer USA /23/12 4:42 PM Page 1. Swing Couplings SC
Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:42 PM Page 1 s SC Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:42 PM Page 2 2-3 4-5 6 7 8-9 10 11 12 13 14 15 16 17 18 19 21 22 23
More informationENGINEERED SOLUTIONS FOR HIGH PRESSURE CONTAINMENT. Wireloctm. dimensional data
ENGINEERED SOLUTIONS FOR HIGH PRESSURE CONTAINMENT Wireloctm dimensional data ENGINEERED SOLUTIONS CONTENTS THE NExT GENERATION 1 SEAL RINGS 2 butt weld HUbS 3 5 blinds 6 8 CLAMP SET 9 CROSS REFERENCE
More informationDura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
More informationRT2Y Compact temperature switch intrinsic safety
ompact temperature switch intrinsic safety Main Features Excellent repeatability Fix dead band for control and alarm Resistant to accidental overtemperature Intrinsic safety Hazardous area 0, 1, 2 pplications
More informationANACONDA MULTIFLEX CONDUIT TYPE UI
ANACONDA MULTIFLEX CONDUIT TYPE UI Very robust, extremely flexible and corrosion resistant Multifl ex type UI is the stainless steel version of type UIG. Extremely fl exible and robust, this fully interlocked,
More information