Analysis and Testing of LIN ECUs
|
|
|
- Bethanie Bond
- 5 years ago
- Views:
Transcription
1 Welcome to the Vector Webinar: Analysis and Testing of LIN ECUs Presenter: Mr. Peter Decker Date: , 9:00 10:00 am (CEST) V
2 Agenda > LIN Tool Chain Product Overview CANoe.LIN & CANalyzer.LIN How to Configure a LIN Remaining Network Simulation? How to Analyze LIN Traffic? How to Stimulate Signals? How to Control LIN Network Management? How to Perform LIN Diagnostics? How to Perform a LIN Slave Conformance Test? How to Analyze a Physical LIN Frame? Slide: 2
3 LIN Tool Chain Use Case LIN Network Design LIN Analysis, Simulation and Test LIN Test Design LIN Measurement and Calibration LIN Diagnostics LIN Reprogramming LIN Embedded SW LIN ECU Platform Tool PREEvision CANoe.LIN, CANalyzer.LIN vteststudio CANape CANoe.Diva, CANoe.LIN, CANalyzer.LIN vflash LIN Embedded, Microsar VC121 Slide: 3
4 Agenda LIN Tool Chain > Product Overview CANoe.LIN & CANalyzer.LIN How to Configure a LIN Remaining Network Simulation? How to Analyze LIN Traffic? How to Stimulate Signals? How to Control LIN Network Management? How to Perform LIN Diagnostics? How to Perform a LIN Slave Conformance Test? How to Analyze a Physical LIN Frame? Slide: 4
5 Product Overview CANoe.LIN & CANalyzer.LIN Supported Protocols LIN1.x LIN2.x SAE-J2602 Slide: 5
6 Product Overview CANoe.LIN & CANalyzer.LIN Typical Applications Simulation (CANoe.LIN) Simulation of a LIN Master Simulation of LIN Slave Nodes Simulation of a LIN Network Simulation of several LIN Masters and LIN Networks Simulation of CAN-LIN Gateways Test (CANoe.LIN) LIN Slave Conformance Testing Observing checks for Master Nodes Slide: 6
7 Product Overview CANoe.LIN & CANalyzer.LIN Typical Applications Online and Offline-Analysis LIN communication LIN scheduling and timings LIN network management and diagnostics LIN protocol errors Interpretation of LIN errors Slide: 7
8 Product Overview CANoe.LIN & CANalyzer.LIN Network Interfaces VN1611* 1 LIN/K-Line + 1 CAN / CAN FD VN CAN or LIN/K-Line (as piggy) + 2 CAN / CAN FD VN CAN / CAN FD or LIN/K-Line (as piggy) (max. K-Line: 2) * VN1611 not capable for LIN conformance tests Slide: 8
9 Product Overview CANoe.LIN & CANalyzer.LIN Network Interfaces VN CAN/CAN FD /LIN/K-Line (as piggy) + 4 CAN / CAN FD (max. K-Line: 2) 1 FlexRay (as piggy) 1 I/O (as piggy) VN CAN/CAN FD/LIN/K-Line (as piggy) (max. K-Line: 2) (max. LIN: 4) 1 FlexRay (as piggy) 1 I/O (as piggy) Slide: 9
10 Product Overview CANoe.LIN & CANalyzer.LIN Network Interfaces Device Bus Interfaces Channels (Fixed / Piggies) LIN Channels HW Sync / Scope Trigger I/O Housing VN1611 VN1630 CAN/CAN FD LIN/K-Line CAN/CAN FD LIN/K-Line 2 (2/0) 1 No No Unbreakable Plastic (1 DSUB9) 4 (2/2) 2 Yes Yes Aluminum (2 DSUB9) Size same as CANcaseXL VN1640 VN8970 VN7570 CAN/CAN FD LIN/K-Line CAN/CAN FD LIN/K-Line FlexRay CAN/CAN FD LIN/K-Line FlexRay 4 (0/4) 4 Yes Yes Aluminum (4 DSUB9) Size 30% larger than CANcaseXL 8 (4/4) 4 Yes Yes Module for VN (4/4) 4 Yes Yes - Slide: 10
11 Agenda LIN Tool Chain Product Overview CANoe.LIN & CANalyzer.LIN > How to Configure a LIN Remaining Network Simulation? How to Analyze LIN Traffic? How to Stimulate Signals? How to Control LIN Network Management? How to Perform LIN Diagnostics? How to Perform a LIN Slave Conformance Test? How to Analyze a Physical LIN Frame? Slide: 11
12 How to Configure a LIN Remaining Network Simulation? Live Demo Slide: 12
13 Agenda LIN Tool Chain Product Overview CANoe.LIN & CANalyzer.LIN How to Configure a LIN Remaining Network Simulation? > How to Analyze LIN Traffic? How to Stimulate Signals? How to Control LIN Network Management? How to Perform LIN Diagnostics? How to Perform a LIN Slave Conformance Test? How to Analyze a Physical LIN Frame? Slide: 13
14 How to Analyze LIN Traffic? Symbolic interpretation of all LIN frame types Raw and encoded signal values Detection and Interpretation of LIN protocol errors Detection and Interpretation of LIN NM events Slide: 14
15 How to Analyze LIN Traffic? Live Demo Slide: 15
16 Agenda LIN Tool Chain Product Overview CANoe.LIN & CANalyzer.LIN How to Configure a LIN Remaining Network Simulation? How to Analyze LIN Traffic? > How to Stimulate Signals? How to Control LIN Network Management? How to Perform LIN Diagnostics? How to Perform a LIN Slave Conformance Test? How to Analyze a Physical LIN Frame? Slide: 16
17 How to Stimulate Signals? Node Panels for easy parameterization of signals at measurement time Control Panels for user-defined control of signals Slide: 17
18 How to Stimulate Signals? Live Demo Slide: 18
19 Agenda LIN Tool Chain Product Overview CANoe.LIN & CANalyzer.LIN How to Configure a LIN Remaining Network Simulation? How to Analyze LIN Traffic? How to Stimulate Signals? > How to Control LIN Network Management? How to Perform LIN Diagnostics? How to Perform a LIN Slave Conformance Test? How to Analyze a Physical LIN Frame? Slide: 19
20 How to Control LIN Network Management? The Network Management Window monitors the current states of all defined LIN buses Use the Sleep and Wake-up commands to interact on LIN buses Slide: 20
21 How to Control LIN Network Management? Live Demo Slide: 21
22 Agenda LIN Tool Chain Product Overview CANoe.LIN & CANalyzer.LIN How to Configure a LIN Remaining Network Simulation? How to Analyze LIN Traffic? How to Stimulate Signals? How to Control LIN Network Management? > How to Perform LIN Diagnostics? How to Perform a LIN Slave Conformance Test? How to Analyze a Physical LIN Frame? Slide: 22
23 How to Perform LIN Diagnostics? The Basic Diagnostics Editor supports the simple definition of diagnostic services A description file (CDD or ODX) is not required The defined services can be used in the consoles and with CAPL Slide: 23
24 How to Perform LIN Diagnostics? Live Demo Slide: 24
25 Agenda LIN Tool Chain Product Overview CANoe.LIN & CANalyzer.LIN How to Configure a LIN Remaining Network Simulation? How to Analyze LIN Traffic? How to Stimulate Signals? How to Control LIN Network Management? How to Perform LIN Diagnostics? > How to Perform a LIN Slave Conformance Test? How to Analyze a Physical LIN Frame? Slide: 25
26 How to Perform a LIN Slave Conformance Test? Test Node Configuration Slide: 26
27 How to Perform a LIN Slave Conformance Test? Live Demo Slide: 27
28 Agenda LIN Tool Chain Product Overview CANoe.LIN & CANalyzer.LIN How to Configure a LIN Remaining Network Simulation? How to Analyze LIN Traffic? How to Stimulate Signals? How to Control LIN Network Management? How to Perform LIN Diagnostics? How to Perform a LIN Slave Conformance Test? > How to Analyze a Physical LIN Frame? Slide: 28
29 How to Analyze a Physical LIN Frame? Integrated oscilloscope solution (USB Scope PS5242B/5444B) LIN specific trigger conditions and protocol decode Slide: 29
30 How to Analyze a Physical LIN Frame? Live Demo Slide: 30
31 Thank you for your attention. For detailed information about Vector and our products please visit Author: Decker, Peter Vector Informatik GmbH Slide: 31
CAN FD - Flexible Tools for Flexible Data Rates
CAN FD - Flexible Tools for Flexible Data Rates Peter Decker Vector Informatik GmbH V 0.01 2012-06-20 Simulation & Test Environment for Automotive Networks Database Test Spec. ECU Simulation & Test Tool
AUTOSAR Software Design with PREEvision
AUTOSAR Software Design with PREEvision Webinar 2013-06-05 Slide: 1 AUTOSAR Software Design with PREEvision Agenda Overview AUTOSAR Software and System Design Integrated AUTOSAR Software Design Vector
Tools for CAN based networking. On the street, in the air, in the orbit
Tools for CAN based networking On the street, in the air, in the orbit Vector Informatik GmbH Vector provides OEMs and suppliers of automotive and related industries a professional and open development
vflash Vector Webinar V
vflash Vector Webinar 2018-10-10 V2.0 2018-07-09 Introduction into vflash vflash Template Concept vflash Project Handling Enhanced Security with Gateway Authentication Custom Actions Tool Editions Extended
CANalyzer.MOST. Product Information
Product Information Table of Contents 1 Introduction to CANalyzer.MOST... 3 2 Interactive Analyses and Tests... 4 2.1 Analysis... 4 2.2 Stimulation... 8 3 Automated Analyses and Stimulation... 10 4 Other
Automatic validation of diagnostics in ECUs
Automatic validation of diagnostics in ECUs CANoe.DiVa Diagnostic Integration and Validation Assistant V1.1 2016-10-10 Agenda Introduction CANoe.DiVa for Automated Diagnostics Validation Summary 2/22 Introduction
CANoe 6.0. The Professional Development and Test Tool for CAN, LIN, MOST, FlexRay and J1587 TOOLS FOR NETWORKS AND DISTRIBUTED SYSTEMS
CANoe 6.0 The Professional Development and Test Tool for CAN, LIN, MOST, FlexRay and J1587 CANoe is an all-round tool for the development, testing and analysis of networks and ECUs. It supports the user
CANalyzer. Product Information
Product Information Table of Contents 1 Introduction to CANalyzer... 4 1.1 Features and Advantages... 4 1.2 Application Areas... 5 1.3 Bus Systems and Protocols... 5 1.4 CANalyzer Variants... 5 1.5 System
High Speed Measurement For ADAS And Fast Analysis
High Speed Measurement For ADAS And Fast Analysis How to read that much data Measurement and Calibration User Day November 13 th 2018 V1.1 2018-11-09 ADAS Logging ADAS Logging Hardware and Software ADAS
AUTOSAR System and Software Design with PREEvision
PREEvision 9.0 RELEASED V0.0 2018-10-15 Agenda CAN FD Commnication Design 2 OVERVIEW 3 Overview AUTOSAR in PREEvision Software Architectre Commnication Network Topology 4 Overview 5 Overview Mlti ser spport
CANbedded. Product Information
Product Information Table of Contents 1 Solutions with CANb edded... 4 1.1 CANbedded... 4 1.2 Advantages of CANbedded... 4 1.3 Your Partner Right From the Start... 4 1.4 Uniform Solution... 4 2 CANbedded
Analog Devices, Inc. Protocol 6 Flash/EE Programming via LIN Downloading software with CANoe.LIN
Analog Devices, Inc. Protocol 6 Flash/EE Programming via LIN Downloading software with CANoe.LIN Date: 14 th June 2007 Version: 3.0 Version 3.0 June 2007 1 of 16 Table of Contents Table of Contents...2
VT System Smart HIL Testing
VT System Smart HIL Testing V1.0 2010-06-04 Agenda > ECU Testing Testing a Door Control Unit Summary and Outlook Slide: 2 ECU Testing I/O Access for ECU Testing ECU has to be tested in its natural environment
OEM Conformance Tests for CAN FD
Vector CAN FD Symposium 2017 V1.0 2017-02-09 Agenda Scope of OEM Conformance Test Motivation for Test Package Test Package Components Vector Solutions for CAN FD Example: CANoe Test Package VAG Summary
CANape Option Bypassing
Product Information Table of Contents 1 Overview... 3 1.1 Introduction... 3 1.2 Overview of Advantages... 3 1.3 Application Areas... 4 1.4 System Requirement... 4 1.5 Further Information... 4 2 Functions...
Introduction to Ethernet and IP in automotive vehicles
Introduction to Ethernet and IP in automotive vehicles Webinar V1.02 2014-05-14 Agenda > Information 3 Introduction 6 Physical layers 8 IEEE Ethernet MAC + VLAN 14 Internet Protocol (IPv4/IPv6) 18 TCP
CANoe.Car2x. Product Information
Product Information Table of Contents 1 Introduction... 3 1.1 Benefits at a Glance... 4 1.2 Application Areas... 4 1.3 Further Information... 6 2 Functions... 6 3 Hardware... 10 4 Training... 10 V1.5 02/2017
Product Information ES582.1 Compact USB Device
Product Information ES582.1 Compact USB Device 1 Public PGA 2016-08-15 ETAS GmbH 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, Content Compact Line Product
Indigo. Vector Diagnostic Tester V / 6
Indigo Vector Diagnostic Tester 1 / 6 V1.3 2018-09-13 Agenda 1. Indigo in General 2. Diagnostic Use Cases 3. Automation of Diagnostic Sequences 4. Remote Diagnostics 5. Summary 2 Indigo in General Executive
CAN-FD Flexible Data Rate CAN
FD CAN-FD Flexible Data Rate CAN A Short Primer and Update V. 202-08-27 Agenda > Why CAN-FD? What is CAN-FD? Basic Concepts CAN-FD Specifics Data Frame Operating Modes/States Physical Layer Considerations
Product Information ES582.1 Compact USB Device
Product Information 1 Public PGA 2017-01-16 ETAS GmbH 2017. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, Content Compact Line Product Description 2 Public PGA
Product Information CANdelaStudio
Table of Contents 1 Introduction... 3 1.1 Properties Overview... 3 2 Functions... 4 3 ODX Functions... 7 4 Quality Improvement by Single Source Principle... 7 5 Data Exchange... 8 6 Editions... 8 6.1 CANdelaStudio
CANoe.MOST. - more efficiency in developing and testing MOST systems -
CANoe.MOST - more efficiency in developing and testing MOST systems - V1.05 2008-10-23 Agenda > Vector Simulation Analysis Test Conclusion Slide: 2 Vector 1988 Vector Informatik established 1998 Vector
Flash Bootloader. Product Information
Product Information Table of Contents 1 Flash Memory Programming... 3 2 Flash Bootloader - ECU programming via CAN, LIN, FlexRay, MOST and Ethernet... 3 2.1 Overview of Advantages... 3 2.2 Application
High-End Datalogging System for Autonomus Driving V
High-End Datalogging System for Autonomus Driving V1.0 2018-11-14 ADAS Logging Logging Concept for ADAS Level 1-2 Setup: Camera & Radar Same Supplier Log 2 Data Types: 1 Raw Data: Video / Radar 2 ECU Internal
Minimum CANoe version to execute test units built with a specific version of vteststudio
For test units built with vteststudio 1.0 and 1.1 always a matching minimum CANoe version has to be used - independent of the commands used within the tests. For test units built with vteststudio 2.0 or
CANoe/CANalyzer.J1587
Product Information Table of Contents 1 Introduction... 3 1.1 Application Areas... 3 1.2 Features and Advantages... 3 1.3 Further Information... 3 2 Functions... 4 3 Hardware Interfaces... 4 4 Protocol-specific
CAN FD with Dynamic Multi-PDU-to-Frame Mapping
CAN FD with Dynamic Multi-PDU-to-Frame Mapping Flexible Network Architectures V0.1 2015-09-25 E/E Trends and Challenges Why is Dynamic Multi-PDU-to-Frame Mapping required? The Trend: Demand for communication
Feature Matrix CANoe 10.0 and CANalyzer 10.0
Testing Feature Matrix 10.0 and 10.0 General data on the number of channels and supported bus systems as well as their network description formats and are multibus tools, which mean that several different
webinar series
Ethernet@Atomotive webinar series Moving Forward: Tool Spported Development for Atomotive Ethernet in Time Sensitive Networks V1.06 2016-07-04 Agenda Introdction 3 Recap: Physical layers, network topology
AUTOSAR Method. Webinar
AUTOSAR Method Webinar 2013-04-17 V2.1 2013-04-16 Agenda >Introduction AUTOSAR Method Exchange Formats Workflows OEM-TIER1 Workflows TIER1 Webinar Series Slide: 2 Introduction Current Workflow (non-autosar)
Measuring Everything. White Paper
White Paper Table of Contents 1 Really Measuring Everything... 3 1.1 Measurement Concept in CANape... 5 1.2 Recorder PC Hardware... 6 2 Accessing Internal ECU Data... 6 2.1 Example: ECU... 9 2.2 Example:
FlexRay - FlexRay Synchronization with CANoe as Gateway
FlexRay - FlexRay Synchronization with CANoe as Gateway Version 2.0 2017-06-12 Application Note AN-IND-1-010 Author Restrictions Abstract Vector Informatik GmbH Public Document Time synchronization is
Current and Prospective High-speed Measurement Systems
Current and Prospective High-speed Measurement Systems Vector Congress 2010, Stuttgart V0.01 2010-11-29 Agenda > Definition: Measurement and Calibration Hardware Customer Requirements Vector Product Strategy
Diagnostic Use Cases V
Diagnostic Use Cases V1.01 2017-06-29 Agenda 1. Diagnostic Use Cases 3 2. Testing 6 3. Reprogramming 15 4. ECU Configuration 19 5. Vehicle Function Data 23 2 Diagnostic Use Cases Overview ECU Configuration
CANoe.AFDX. Product Information
Product Information Table of Contents 1 Introduction... 3 1.1 Overview of Advantages... 3 1.2 Application Areas... 3 1.3 Further Information... 3 2 Hardware Interfaces... 4 3 Symbolic Display via Databases...
PREEvision Technical Article
PREEvision Technical Article AUTOSAR-Conformant Vehicle Diagnostics over : Developing Diagnostic Communications for E/E Systems The electronically controlled systems of modern vehicles are networked with
VH6501 CAN Disturbance Interface Manual. Version 1.0 English
VH6501 CAN Disturbance Interface Manual Version 1.0 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart The information and data given in this user manual can be changed without
CANalyzer.AFDX. Product Information
Product Information Table of Contents 1 Introduction... 3 1.1 Overview of Advantages... 3 1.2 Application Areas... 3 1.3 Further Information... 3 2 Hardware Interfaces... 4 3 Symbolic Display via Databases...
User Manual Vector Logger Configurator. Version 2.7 English
User Manual Vector Logger Configurator Version 2.7 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart Vector reserves the right to modify any information and/or data in this
Benefits of Collecting Code Coverage Metrics during HIL/ECU Testing
Benefits of Collecting Code Coverage Metrics during HIL/ECU Testing Jeffrey Fortin Product Manager VectorCAST V0.1 2018-10-30 Agenda 1. How VectorCAST fits into HIL/ECU Testing 2. Demo 3. Questions and
CANoe and CANalyzer as Diagnostic Tools
Version 1.5 2017-05-03 Application Note AN-IND-1-001 Author Restrictions Abstract Vector Informatik GmbH Public Document This application gives an introduction into working with diagnostics in CANoe/CANalyzer.
ODX Live. How to Setup a Standards-based Diagnostic Process Chain
ODX Live How to Setup a Standards-based Diagnostic Process Chain 2008. Vector Informatik GmbH. All rights reserved. Any distribution or copying is subject to prior written approval by Vector. V1.0 2008-04-22
VN5610/VN5610A Ethernet/CAN Interface Manual. Version 2.2 English
VN5610/VN5610A Ethernet/CAN Interface Manual Version 2.2 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart The information and data given in this user manual can be changed
1 About this Support Note Introduction Use Loops Use Test Case Lists Example Contacts... 8
2016-01-25 SN-IND-1-022_TestCase_Iterations.pdf Author(s) Restrictions Katranksi, Ute Table of contents 1 About this Support Note... 1 2 Introduction... 1 3 Use Loops... 2 4 Use Test Case Lists... 3 5
Product Information CANoe.MOST
Table of Contents 1 Introduction to T... 3 2 Interactive Analyses and Tests... 4 3 Automation of ECU Tests... 7 3.1 Automated Analyses... 7 3.2 Functional and Integration Tests... 7 4 Simulation... 9 5
Concept Manual vteststudio. Version 2.2 English
Concept Manual vteststudio Version 2.2 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart The information and data given in this user manual can be changed without prior notice.
Diagnostics is evolving
Diagnostics is evolving Vector India Conference, 208-07-8 V.0 208-07-3 Agenda AUTOSAR Development Remote Diagnostics and OTA Secrity 2 AUTOSAR Development DEXT Diagnostic Extract Template (=DEXT) Part
AUTOSAR Diagnostic Extract
AUTOSAR Diagnostic Extract The Standard in Practice V1.0 2017-09-26 Agenda Diagnostic Processes in Place AUTOSAR DEXT Introdction Designed for ECU development Enhancement of E/E Workflow Conclsion 2 Diagnostic
CANoe/CANalyzer. Tools for comprehensive CAN Network Analysis and Test - An Overview V
CANoe/CANalyzer Tools for comprehensive CAN Network Analysis and Test - An Overview V1.53 2016-03-08 Agenda Overview Measrement and Simlation Setp Working with Databases Analysis Windows Data Logging Offline
Accessories GL Loggers & CANlog
Product Information Table of Contents 1 Overview... 4 2 LINprobe... 5 2.1 Functions... 5 2.2... 5 3 GLA150... 6 3.1 Functions... 6 3.2... 6 4 GLA320... 7 4.1 Functions... 7 4.2... 7 5 CANgps / CANgps 5
High-Speed Reprogramming and Calibration with CAN FD: A Case Study
High-Speed Reprogramming and Calibration with CAN FD: A Case Study Armin Happel, Erik Sparrer, Oliver Kitt, Oliver Garnatz, Peter Decker Reprogramming of ECUs as well as their in-vehicle calibration are
CANape. Product Information
Product Information Table of Contents 1 Overview... 4 1.1 Introduction... 4 1.2 Overview of Advantages... 4 1.3 Application Areas... 5 1.4 Features... 5 1.5 System Requirements... 5 1.6 Supported Bus Interfaces
AUTOMOTIVE WAKEUP METHODS. Natalie Wienckowski September 2017 IEEE802.3 Interim
AUTOMOTIVE WAKEUP METHODS Natalie Wienckowski September 2017 IEEE802.3 Interim AGENDA GENERAL WAKEUP REQUIREMENTS WAKE ON TRAFFIC PARTIAL NETWORK WAKEUP PSEUDO PARTIAL NETWORK SUMMARY Page 3 Page 5 Page
Diagnostics via CANoe Gateways
Version 1.3 2017-03-08 Application Note AN-IND-1-004 Author Restrictions Abstract Vector Informatik GmbH Public Document Explains the concept of a diagnostics gateway between CAN and any other bus system
MICROSAR-OS. Embedded Real-time Multitasking Operating Systems
Embedded Real-time Multitasking Operating Systems 2013. Vector Informatik GmbH. All rights reserved. Any distribution or copying is subject to prior written approval by Vector. V 1.09 2013-05-03 AUTOSAR
SQL Parsers with Message Analyzer. Eric Bortei-Doku
SQL Parsers with Message Analyzer Eric Bortei-Doku Agenda Message Analyzer Overview Simplified Operation Message Analyzer Parsers Overview Desktop UI Demos Analyzing Local Ping Traffic Analyzing a Capture
webinar series
Ethernet@Atomotive webinar series Introdction to Atomotive Ethernet V1.08 2017-09-21 Agenda Information 3 Introdction 6 Physical layers 9 IEEE Ethernet MAC + VLAN 16 Internet Protocol (IPv4/IPv6) 19 TCP
NI-XNET Python API Documentation
NI-XNET Python API Documentation Release 0.3.0 National Instruments Oct 08, 2018 Table of Contents: 1 Quick Start 3 2 Resources 5 2.1 Product Support............................................. 5 2.2
Efficient testing of ECUs despite Security
Vector Cyber Security Symposium 2017 V0.1 2017-09-26 Security is a must have Security makes testing harder Security is a must have Todays features in vehicles require security Test Tools must support security
VN5640 Ethernet/CAN Interface Manual. Version 1.2 English
VN5640 Ethernet/CAN Interface Manual Version 1.2 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart The information and data given in this user manual can be changed without
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing www.imc-berlin.com/busdaq imc BUSDAQflex at a glance Provides 2 to 12 CAN nodes
CANape. Product Information
Product Information Table of Contents 1 Overview...4 1.1 Introduction...4 1.2 Overview of Advantages...4 1.3 Application Areas...5 1.4 Features...5 1.5 System Requirements...5 1.6 Supported Bus Interfaces
10 th AUTOSAR Open Conference
10 th AUTOSAR Open Conference Dr. Günther Heling Vector Informatik AUTOSAR Adaptive Platform Now it s Time to get on Board AUTOSAR Nov-2017 Introduction At the first glance Adaptive and Classic don t have
Measurement Solution for new Radar Microcontroller V
Measurement Solution for new Radar Microcontroller V1.01 2015-12-03 New Vehicle Architecture Technology Change E-Drive Cloud computing Autonomous driving Connectivity Security ECU less age Some ECU age
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing www.imc-berlin.com/busdaq Advantages imc BUSDAQflex Efficient vehicle and measurement
ASAM-MCD-2 NET (FIBEX)
ASAM-MCD-2 NET (FIBEX) Data Model for ECU Network Systems (Field Bus Data Exchange Format) Version 4.1.2 Date: 2017-06-02 Base Standard by ASAM e.v., 2017 Disclaimer This document is the copyrighted property
Aula Mercedes Benz : Table of Contents THEORY (20 HOURS) 1.- BASIC INTRODUCTION TO VEHICLE TELEMATICS IN-VEHICLE NETWORKS - 30 MINS
THEORY (20 HOURS) 1.- BASIC INTRODUCTION TO VEHICLE TELEMATICS 1.1.- IN-VEHICLE NETWORKS - 30 MINS 1 Electronic Control Units (ECUs). Networking advantages. 1.2.- PROTOCOLS (OVERVIEW) 60 MINS Procols classification.
ODX TechDay, Seoul. How to come to ODX data? V
ODX TechDay, Seoul How to come to ODX data? V1.00 2017-06-22 Agenda 1. Motivation 2. How to come to ODX data? 3. Comparison 4. Summary 2 Motivation ODX ODX as a standard is widely used. Process partners
CANoe.Ethernet. Product Information
Product Information Table of Contents 1 Introduction... 3 1.1 Overview of Advantages... 3 1.2 Application Areas... 4 1.3 Further Information... 4 2 Functions... 4 3 Hardware... 5 4 Trainings... 5 5 Note...
Welcome to the Webinar Embedded Software for J1939
Welcome to the Webinar Embedded Software for J1939 On November 11 at 9 AM (CET) 2014. Vector Informatik GmbH. All rights reserved. Any distribution or copying is subject to prior written approval by Vector.
imc BUSDAQ / imc BUSLOG
imc BUSDAQ / imc BUSLOG autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing www.imc-berlin.com/busdaq imc BUSDAQ/BUSLOG at a glance Processes
imc fieldbus conection options Table of contents 1. imc fieldbus connection options 2. Fieldbus: Technical Details
Table of contents 1. imc fieldbus connection options 1.1 CAN-Bus... 3 1.2 LIN-Bus... 4 1.3 J1587-Bus... 5 1.4 ARINC-Bus... 6 1.5 FlexRay-Bus... 7 1.6 XCPoE Slave... 8 1.7 XCPoE Master... 9 1.8 PROFIBUS...
Accessories for Network Interfaces CAN / LIN / IO / ETHERNET / FlexRay. Version 6.4 English
Accessories for Network Interfaces CAN / LIN / IO / ETHERNET / FlexRay Version 6.4 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart The information and data given in this
1 About this Support Note
2018-08-21 Author(s) Restrictions Morizur, Pascale Table of contents 1 About this Support Note... 1 2 Overview... 1 2.1 Ready to use Pool Examples with simulation... 2 2.2 Usage of the detail view of the
Ensuring quality for ADAS applications with a model-based approach
Åsa Björnemark, Manager Test Solutions, Vector Scandinavia V1.0 2015-12-03 Volvo Car Statement We are building fewer and fewer test vehicles, and we need to find alternative ways to verify functions in
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing imc BUSDAQ / BUSLOG Efficient data acquisition and real-time calculations Advantages
Getting Started with VN5640
Version 1.0 2017-04-11 Application Note AN-IND-1-020 Author Restrictions Abstract Vector Informatik GmbH Public Document Document about the configuration steps of the VN5640 interface to make settings
Automotive Security: Challenges and Solutions
Automotive Security: Challenges and Solutions 8 th Vector Congress 30 th November 2016 V2.01.00 2016-11-22 Agenda Introduction Services Embedded Security Mechanisms Tools Summary 2 Introduction Vehicle
GL Logger Families. Product Information
Product Information Table of Contents 1 Introduction to the GL Logger... 4 1.1 Overview of Advantages... 4 1.2 Bus Systems and Interfaces... 5 2 Functions... 5 2.1 Graphical Configuration Program... 5
Tooling Overview ADAS - Status & Ongoing Developments
Tooling Overview ADAS - Status & Ongoing Developments Vector India Conference 2017 V0.1 2017-07-04 ADAS solution - Efficient development of multisensor applications Contents of Vector ADAS solution algorithm
VN1600 Interface Family Manual. Version 4.1 English
VN1600 Interface Family Manual Version 4.1 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart The information and data given in this user manual can be changed without prior
Solutions for. Avionics Networking. CANoe.CANaero. CANalyzer.CANaero ENGLISH
Solutions for Avionics Networking CANoe.CANaero ENGLISH CANalyzer.CANaero CANalyzer.CANaero 7.6 Universal Analysis Tool for CAN-based Avionics Networks Overview of Advantages Easy observation of data traffic
vsignalyzer Product Information
Product Information Table of Contents 1 Overview... 3 1.1 Introduction... 3 1.2 Overview of Advantages... 3 1.3 Application Areas... 4 1.4 System Requirements... 4 1.5 Functional Extension by Additional
Agenda. > AUTOSAR Overview. AUTOSAR Solution. AUTOSAR on the way
AUTOSAR Overview Agenda > AUTOSAR Overview AUTOSAR Solution AUTOSAR on the way Slide: 2 Overview and Objectives AUTOSAR Partnership Slide: 3 Development of Functionality Electronic fuel injection Cruise
The Power to Log. Powerful Solution for Vehicle Testing and Validation of Automobile Networks
The Power to Log Powerful Solution for Vehicle Testing and Validation of Automobile Networks Accessory Modular Hardware and Software Upgrade Options Next Generation Data Logging: The Power Family Autonomous
Network analysis and automotive diagnostics
Network analysis and automotive diagnostics Designed for the automotive industry Offers is a 5 in 1 CAN/LIN bus monitoring tool with integrated automotive diagnostic functions. Ÿ Automotive OBD Scan tool
Product Information CANalyzer.MOST
Product Information Table of Contents 1 Introduction to... 3 2 Interactive Analyses and Tests... 4 2.1 Analysis... 4 2.2 Stimulation... 7 3 Automated Analyses and Stimulation... 9 4 Other Application Areas...
In the table below you will find the icon conventions used throughout the Support Note. This icon indicates notes and tips that facilitate your work.
2016-01-26 SN-IND-1-015_CANoe_CANalyzer_Padding_DiagnosticFrames.pdf Author(s) Restrictions Morizur, Pascale and Ernst, Oliver Table of contents 1 About this Support Note... 1 2 Overview... 1 3 Set frame
User Documentation. Influx Technology. DiaLog Quick Start Guide
User Documentation DiaLog Quick Start Guide Influx Technology WWW.INFLUXTECHNOLOGY.COM 1 Introduction... 3 2 Software... 3 2.1 DiaLog Installation... 3 2.2 Rebel Drivers Installation... 5 2.3 Software
CANape ASAM-MCD3 Interface Version Application Note AN-AMC-1-103
Version 3.2 2018-06-19 Application Note AN-AMC-1-103 Author Restrictions Abstract Vector Informatik GmbH Public Document This is document is a general introduction explaining the CANape ASAM-MCD3 Interface
PREEvision. Release Notes. Version 7.5 SP5 English
PREEvision Release Notes Version 7.5 SP5 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 70499 Stuttgart, Germany Vector reserves the right to modify any information and/or data in this user
Networking with CAN FD have you also thought about testing?
Networking with CAN FD have you also thought about testing? Test environment for manufacturer-independent control unit tests Introduction The introduction of new technologies in the automotive industry
Installation and user s manual
Data logger configuration software Installation and user s manual Document n 0256968 V.1 EXXOTEST is a brand of the company Annecy Electronique 2 INDEX 1. DOCMENT S AIM AND BIBLIOGRAPHY 4 1.1. DOCUMENT
The CAN Bus From its Early Days to CAN FD By Friedhelm Pickhard (ETAS/P)
By Friedhelm Pickhard (ETAS/P) 1 ETAS Introduction to ETAS Group ETAS Group Corporate Profile Founded 1994 Shareholder Headquarters 100 % Robert Bosch GmbH Stuttgart, Germany 18 additional offices worldwide
OFF-ROAD VEHICLE DIAGNOSTICS WITH AUTOSAR. Jigar Patel Namdeo Dhawle July 18, 2018
OFF-ROAD VEHICLE DIAGNOSTICS WITH AUTOSAR Jigar Patel Namdeo Dhawle July 18, 2018 AGENDA Motivation of UDS diagnostics in Agriculture and Construction Vehicles UDS vs J1939 Challenges and Proposed solutions
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing Partner Italiano di imc dal 1993 Instrumentation Devices Srl Via Acquanera 29-22100
ASAM MCD-1 (XCP) Protocol Layer Specification Base Standard
ASAM MCD-1 (XCP) Universal Measurement and Calibration Protocol Protocol Layer Specification Version 1.4.0 Date: 2017-07-01 Base Standard by ASAM e.v., 2017 Disclaimer This document is the copyrighted
Manual. FlexRay Interface Family. VN7600 Version 5.1 English
FlexRay Interface Family VN7600 Version 5.1 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart The information and data given in this user manual can be changed without prior
Product Information Embedded Operating Systems
Product Information Embedded Operating Systems Table of Contents 1 Operating Systems for ECUs... 3 2 MICROSAR.OS The Real-Time Operating System for the AUTOSAR Standard... 3 2.1 Overview of Advantages...