Rimage Software Suite Release Notes

Transcription

1 Requirements, Compatibility Information and Upgrade Instructions Requirements Rimage Software Suite version requirements include: The Windows installation is supported on these 32-bit platforms: Windows 7 Ultimate with Service Pack 1 Windows 7 Enterprise with Service Pack 1 Windows 7 Professional with Service Pack 1 Windows 8 / 8.1 Professional Windows 8 / 8.1 Enterprise Windows 10 Professional Windows 10 Enterprise The Windows installation is supported on these 64-bit platforms: Windows 7 Ultimate with Service Pack 1 Windows 7 Enterprise with Service Pack 1 Windows 7 Professional with Service Pack 1 Windows Server 2012 R2 Windows 8 / 8.1 Professional Windows 8 / 8.1 Enterprise Windows 10 Professional Windows 10 Enterprise Installing Your Software To install your new software, refer to the Setup and Installation instructions included with your Rimage Autoloader or Printer. The Setup and Installation instructions for your product are also available at Printer, recorder, and autoloader firmware are not automatically updated when you update your software. After you install your new software, visit to check for firmware updates and service packs. To view information about the latest firmware and software updates, refer to your product s support page. Version November,

2 Changes to Rimage Software Suite Includes features and fixes for the software release. Rimage Software Suite Installer Jira DIST-60: updated Prism printer driver files. Jira DIST-51: fixed install failure if latest version of Visual Studio 2017 is installed. Jira DIST-59: fixed issue where uninstall would fail if computer name was changed. Rimage Production Server Jira PS-394: fixed crash when trying to log a very long extent list when reading a UDF disc. Jira PS-430: fixed problem with renaming a folder in automatic bulk read mode when saving full disc images if the Volume ID contained an invalid folder name character. Jira PS-431: fixed problem with reading discs as DDP in Automatic Bulk Read Mode. Jira PS-435: fixed problem with a false clamping failure on the 2000i loader. Jira PS-436: fixed problem with excessive retries when searching for a VAT on a UDF disc. Jira PS-438: fixed problem with not marking Blu-ray video discs with the IsVideoDVD attribute set to true in the full disc map XML file. Jira PS-439: added the order ID to the Read Block xxx failed messages. Jira PS-440: fixed bad error message Error reading UDF - Error creating file 's' - s sent to EDS. Jira PS-443: disabled SCSI adaptive tracing since it affects throughput significantly. Jira PS-445: fixed problem with streaming failure when QuickDisc (on another PC) creates a.rmg file in the Rimage share on the Production Server computer. Jira PS-446: use track-at-once for 2nd session for Blue Book CDs to work around a Pioneer Blu-ray drive problem. Jira PS-447: fixed problem when copying a Blue Book CD that may yield an unreadable data section. Jira PS-448: fixed problem with not deleting the reject label when the DeleteOnCompletion attribute for the RejectLabel element is set to true in the XML ProductionOrder. Version November,

3 Jira PS-449: fixed problem with not switching to bin 1 on the Allegro 100 when both bins are configured as inputs and bin 2 runs out of discs on a print-only job. Jira PS-451: fixed problem with failing an XML ProductionOrder that doesn t contain the Copies attribute, even though the DTD has a default value. Jira PS-452: fixed problem with failing to load the printer on a Catalyst loader when the reject disc final destination is the mailbox and a reject label is to be printed on it. Jira PS-453: fixed problem with incorrect bin usage value returned in XML reply when an input/output bin is full. It was Input when it should have been Output. Jira PS-455: fixed problem with sending a retransfer command to the loader after failing to complete printing to the retransfer sheet. Jira PS-456: disabled display of the device disconnected alert when sending a reset command to the Everest printer. Jira PS-457: automatically clear device disconnected alert if the device is reconnected. Jira PS-458: added command-line switch -cos_xxx to automatically cancel inactive order sets after XXX minutes. Jira PS-459: fixed problem with assigning non-blu-lock recorders to a multi-copy Blulock job. Jira PS-461: fixed problem with posting incorrect error dialog if pick from printer fails on an out of ribbon error. Jira PS-462: fixed problems with using the Allegro 100 in Loader Control mode. Jira PS-463: fixed problem when updating the loader firmware twice from RSM. Jira PS-464: fixed problem with failing to record a Patronus DVD image unless an RVP or Blu-lock dongle is inserted. Rimage Bridge Server None. Rimage Image Server None Rimage QuickDisc Version November,

4 Jira QD-507: changed default filesystem type for Blue Book CDs from UDF 1.5 to ISO Level 2 so the data on the discs can be accessed. Jira QD-510: fixed problem when a QDD file with zip encryption options is opened, the "Encrypt Zip File" checkbox is unchecked and the ZIP file is not encrypted if the user doesn't check the box explicitly. Jira QD-512: fixed inability to select a default label. Rimage System Manager Jira SMII-111: enable the server settings right-click menu item from the top left image on the main screen if only messaging server is running. Jira SMII: added an Exit menu item to the hamburger menu on the main screen. Jira SMII-112: fixed incorrect message when it fails to disable a recorder. Jira SMII-116: fixed problem with not displaying the retransfer ribbon count for the Everest Encore printer. Jira SMII-117: fixed problem with displaying the details for the wrong order when rightclicking on a job in the jobs pane. Rimage WebRSM Jira WEBRSM-116: fixed wrong printer picture for Allegro loaders. Utilities Jira UTL-5 (Gemini Utilities): Added separate messages for PS and EPS running at startup. Added option to stop EPS service if it s running. Jira UTL-8: (Allegro Utilities): fixed problem with not reporting the correct version after updating the firmware. Version November,

5 Known Issues Folders cannot be added to jobs using WebQD in certain browsers. This is due to these browsers no longer supporting Java. Rimage recommends using Internet Explorer. In Rimage System Manager, if a QuickDisc job is resubmitted, but the media type is changed, the previous media type still shows in the Jobs window. For example, if you submit a job for CDR and then resubmit the same job (same ID) for DVDR, it will still say CDR as the type. This is a display only issue and the job is completed using the currently selected media type. For information on other known issues found in the Rimage Software Suite v , please refer to Version November,