Producer V Series Producer V N & 8300

Transcription

1 Depot Part Field Part N Producer V Series Producer V N & 8300 x x Bin full sensor External output bin sensor $ x x Carousel 4 bin carousel $ x x Carousel sensor $ 8.06 x x Producer V Door $ x Hard drive set Raid 5/0, 3 HDDs $ x Single HDD 500GB with rails $ x SSD for OS 256GB with rails $ x x Door Key and Lock $ 5.51 x x Operator panel 4 line LCD display $ x x DVD recorder SATA, Quick-release $ x x BDR recorder SATA, Quick-release $ x x Gripper Assy, Non-Perfect Print $ x x Gripper assy, with Perfect Print $ x x Carousel belt $ x x Carousel motor $ x x Door sensor $ x x Fan, 120mm $ x x Lift arm belt $ x x Lift arm cover $ x x Fan $ x x Lift motor $ x x Lift motor pulley $ x PC button $ x x Power Supply $ Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended you contact x x Control Ships with out flash $ Depot Parts require an experienced repair technician and special tools and should only be attempted by Rimage Factory Repair * Parts are not returnable items. All sales are final. Page 1

2 Depot Part Field Part N N N Producer IV Series Producer IV , 7200, 8200, 6200N, 7200N, and 8200N x x Bin full sensor External output bin sensor $ x x x x x x Carousel 4 bin carousel $ x x x x x x Carousel sensor $ 8.06 x x N / 6200 Door $ x x N / 7200 Door $ x x N / 8200 Door $ x Embedded module Q67 mother Win 7 $ 3, x x Embedded module Q67 mother Win 7 $ 3, x Hard drive set Raid 5/0, 3 HDDs $ x x Hard drive set Raid 5/0, 4 HDDs $ x x x x x x Door Key and Lock $ 5.51 x x x x x x Operator panel 4 line LCD display $ x x x x x x External Output bin $ x x x x x x DVD recorder SATA, Quick-release $ x x x x x x BDR recorder SATA, Quick-release $ x x x Hard drive assembly Single HDD, requires 9.0 software or higher $ x x x x x x Gripper Assy, Non-Perfect Print With light $ x x x x x x Gripper assy, with Perfect Print With light $ x x x x x x Carousel belt $ x x x x x x Carousel motor $ x x x x x x Door sensor $ x x x x x x Flex cable Flex cable for the lift arm $ x x x x x x Fan, 120mm $ x x x x x x Fan, 80mm $ x x x x x x Lift arm belt $ x x x x x x Lift arm cover $ x x x x x x Fan $ x x x x x x Lift motor $ x x x x x x Lift motor pulley $ x x x PC button $ x x x Embedded PSU $ x N Power supply assembly $ 1, x N Power supply assembly $ 1, x N Power supply assembly $ 1, x x x x x x USB hub $ x x x x x x CABLE, COMBO SATA, 25" POWER, 31" DATA Non-Module, SATA and Power cable $ 8.93 Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended you contact x x x x x x Control Ships with out flash $ x x x x x x Power supply $ x x x Power supply - Emb PC Non-Module Embedded PC $ Depot Parts require an experienced repair technician and special tools and should only be attempted by Rimage Factory Repair * Parts are not returnable items. All sales are final. Page 2

3 Depot Part Field Part N N N Producer III Series Producer III , 7100, 8100, 6100N, 7100N, and 8100N Producer III is End of Service. Parts may or may not be available. x x Adhesive back bumper Cone-shaped Bumper $ 0.90 x x Bin full sensor $ x x x x x x Carousel $ x x x x x x Carousel sensor $ 8.06 x x x x x x Gripper (picker) assembly $ x Hard drive set Replaced as a set $ x x Hard drive set Replaced as a set $ x x x x x x Operator panel LCD display $ x x x x x x DVD recorder SATA, Quick-release $ x x x x x x BDR recorder SATA, Quick-release $ x x x x x x Carousel belt $ x x x x x x Carousel motor $ x x x x x x Door sensor $ x x x x Flex cable Flex cable for the lift arm $ x x Flex cable Flex cable for the lift arm $ x x Fan $ x x x x Lift arm belt $ x x Lift arm belt $ x x x x x x Lift arm cover $ x x x x x x Lift motor $ x x x x x x Lift motor pulley Includes setscrew $ x x x PC button $ x Power supply assembly $ 1, x Power supply assembly $ 1, x Power supply assembly $ 1, Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended you contact x x x x x x Control unflashed $ x x x x x x Power supply Retrofit upgrade kit $ x x x Power supply - Emb PC Power supply for pc module $ Depot Parts require an experienced repair technician and special tools and should only be attempted by Rimage Factory Repair * Parts are not returnable items. All sales are final. Page 3

4 Field Part N Catalyst Series Catalyst and 6000N x USB3 Hub $ x x Gripper, non-pp $ x x Gripper, with PP $ x HDD Assy $ x x DVD recorder - SATA, Quick-release $ x x BDR recorder - SATA, Quick-release $ x x Carousel $ x x Control $ x x Power supply $ x Mother Q87 $ 1, x x Carousel motor $ x x Lift motor $ x Flex cables $ x x output bin $ x x Operator Panel $ x x SATA and Power Cable For recorders $ 8.93 Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended you contact * Parts are not returnable items. All sales are final. Page 4

5 Field Part Allegro 20 Allegro 100 Allegro Series Rimage Allegro 20 and Allegro 100 x Main + USB3 + Hardware $ x Bravo SE3 Main $ x USB 3.0 Hub Board $ x Cover-Disc Drawer $ x Cover-Base $ x Top Cover Tinted $ x Cover-Drawer Ramp Two per machine $ x Control Panel $ x Picker Arm Assembly $ x Assembly Carrier Frame $ x Maintenance Station - Sled $ x Assembly Carrier Frame $ x Carrier Latch $ 9.64 x Felt Ink Pad Top $ 3.71 x Felt Ink Pad Bottom $ 3.71 x Power Supply Ext 12V - 60W $ x Main + USB3 + Hardware $ x Main $ x USB 3.0 Hub 2 SATA Board $ x Button Control Panel $ x Blue LED Light Board $ x Assembly - Cover (Complete) $ x Print Tray - Plastic w/ disc clamp $ x Print Tray - Belt Tensioner $ x Picker Assembly $ x Picker Arm Assembly $ x Carrier Frame $ x Belt Tensioner $ x Carrier Belt $ 4.51 x Motor Carrier Drive $ x Encoder Strip $ 0.97 x Assembly - Cartridge Carrier $ x Carrier Latch $ 9.64 x Fan (External and Ink Suction) $ x Power Supply $ x Tray - 50 Disc $ x Kiosk Kit Complete - Plastic Tray and Metal Bracket $ Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended you contact * Parts are not returnable items. All sales are final. Page 5

6 Depot Part Field Part AutoPrinter Series AutoPrinter II/III AutoPrinter II is End of Service. Parts may or may not be available Carousel $ Carousel sensor $ Gripper (picker) assembly $ Cable, DB9 cable for flashing the control $ Carousel belt $ Carousel motor $ Door hinge $ Flex cable Flex cable for the lift arm $ Lift arm belt $ Lift arm cover Note: Nickel-plated shafts must also be replaced $ Lift motor $ Shaft $ Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended you contact Rimage for service options for these repairs Door sensor $ Control - Amigo/Autoprinter Part only, unflashed $ Operator panel Button $ Power supply - Amigo/Autoprinter Part only (Must order an adapter plate P/N ) $ Depot Parts require an experienced repair technician and special tools and should only be attempted by Rimage Factory Repair * Parts are not returnable items. All sales are final. Page 6

7 Depot Part Field Part 5410N N 3400 Professional Series Professional 5410N/5400 and 3410/ and 3400 is End of Service. Parts may or may not be available. x x x x Disc Dispenser $ x Door Assy, 5400N $ x Door Assy, 3400 $ x x DVD recorder SATA, Quick-release $ x x BDR recorder SATA, Quick-release $ x x x x E400 Printer Assembly $ 3, x N Hard Drive Set $ x N Hard Drive Set $ x x x x Lift Arm Gripper (Picker) assembly $ x x x x Autoloader Control Board $ Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended you contact x x x x Operator Panel LCD Display $ x x x x Lift Motor $ x x x x THERMAL HEAD ASSEMBLY Print Head Assembly $ x x x x Clamping Pin $ x x x x Heat Roller Fuse $ x x x x Platen Roller $ x x x x Heat Roller Assembly $ x x x x ITS-MOTOR ASSY $ x x x x PM-Motor-ASY $ x x x x CLEANING_ROLLER-B $ x x x x CLEANING_ROLLER-A $ x x x x FFC Printer Tray $ x x x x Tray Open Sensor $ x x x x Printer Control Board $ x x x x HR Thermistor, E400 $ x x x x HR Bearing, E400 $ x x x x Torque Limiter 500B, E400 $ x x x x Torque Limiter 2500C, E400 $ x x x x ITS-Sensor Upper Assy, E400 $ x x x x ITS-Sensor Lower Assy. E400 $ x x x x CMY Ribbon Sensor $ x x x x Serial Numbers newer than Printer Power Supply or $ x x Serial Numbers older than Printer Power Supply - older model or $ 9.03 x x x x Peeling Roller $ x USB Harness, 3400 $ x x x x mm Fan, 5400/3400 $ x PCB, Front USB, 5400 $ x x x x D Guide Sheet 1 (Pivot Tray) $ 7.05 x x x x D Guide Sheet 2 (Case L) $ 6.46 x x x x Autoloader Power Supply $ x x x x Lift Belt $ x x x x Carousel Belt $ x x x x Carousel Motor $ x x x x Sensor Guard $ 5.95 x x x x Tray PCB $ x x x x E400 Lock lever $ x x N/5410N Q87 MOTHERBOARD SERV Q45/Q67 to Q87 kit $ 1, Depot Parts require an experienced repair technician and special tools and should only be attempted by Rimage Factory Repair * Parts are not returnable items. All sales are final. Page 7

8 Depot Part Field Part Operator Part III E600 Encore Everest Printers Everest III, Everest 600, Everest Encore x x x Clamping pin Kit includes 2 pins $ x x x Ink ribbon base plate $ x x x Bushing Qty. 10 $ 1.71 x x x C-clamp Qty. 10 $ 0.09 x Gear pin $ 9.35 x x x Heat roller assembly $ x x x Heat roller spring $ 1.42 x x x ITS feed bobbin $ 1.03 x x x ITS feed shaft $ x x x ITS Peeling roller assembly $ x x x Platen roller $ x x x Power supply $ x Print head assembly $ 1, x x Print head assembly HD_UNIT, EV600 $ 1, x x x Torque limiter $ x x x Torque limiter $ Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended you contact x x x Capstan Bracket Assembly $ x x x HB42 Motor for Platen feed $ x x x HD Release PCB or Mid_Frame PCB $ x Heat roller cam shaft assembly $ x x x ITS gear assy $ x x x ITS Plate5 Assembly $ x ITS Position PCB $ x x x ITS roller shaft 3 $ x x x Ribbon PCB $ x x x Torque Limiter 300, Everest $ x x x Tray gear $ 1.49 x x ITS Lever Pin $ 3.20 Depot Parts require an experienced repair technician and special tools and should only be attempted by Rimage Factory Repair * Parts are not returnable items. All sales are final. Page 8

9 Field Part PrismPlus! Prism III Prism Printers PrismPlus! and Prism III PrismPlus! Is End of Service. Parts may or may not be available. x x Base Pad Prism on Autoloader $ x Base Pad Standalone Prism $ x x Feet - small Prism on Autoloader $ 1.08 x Feet - large Standalone Prism $ 4.50 x PrismPlus! Cover $ x Prism III Cover $ x x Roller - payout $ x x Roller - take-up $ x Bitmap Standalone PrismPlus! $ x Prism III Control Board Prism III $ x Bitmap PrismPlus! for an Autoloader $ x x Lead screw Includes one attached bearing $ x x Printer cam $ x x Print head replacement kit $ x x Ribbon motor / print head motor $ x x PCBA, CD SENSOR W/ SWITCH, PRISM $ x x BELT, TIMING, 92T,.08P MXL.25W $ 8.69 Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended contact Depot x x Lead screw bearing $ 6.98 Part Depot Parts require an experienced repair technician and special tools and should only be attempted by a Rimage Repair Depot * Parts are not returnable items. All sales are final. Page 9

10 Field Part Desktop Series Desktop 2000i & 2000i Series II Desktop 2000i is End of Service. Parts may or may not be available Timing Belt $ Input/output bin $ Operator panel LCD display $ Printer platform Metal platform for disc $ USB 2 hub USB 2 for original 2000i $ USB 3 Hub USB 3 for 2000i Series II only $ Recorder - CD/DVD 2000i Series II only $ Recorder - Blu-ray 2000i Series II only $ Air Flow upgrade $ Recorder upgrade SATA cable $ Control $ Gripper (picker) assembly Lift arm $ Gripper (picker) assembly retro-fit kit Includes lift arm and printer platform $ Printer assembly $ 1, Power supply assembly $ Field Parts require advanced technical abilities and are intended for experienced technicians only. It is recommended you contact * Parts are not returnable items. All sales are final. Page 10

11 Parts Category Definition Other Technical Requirements Operator Parts replaced by the Rimage System Key Operator: Operator trained during the system installation Authorized Repair Personnel Familiar with MS Office and Windows Explorer Ability to install application level software and service packs Has replaced toner, cleared jams on paper copiers or ink cartridges on a typical printer. Field Technician Parts replaced at the production location: Work normally performed by a Rimage Field Engineer Typically requires specialized training, technical fine motor skills, and experience Requires special training and experience: Thorough understanding of Windows OS and PC network administration Comfortable with replacing general PC-type components and performing fine mechanical adjustments Understands Windows 10, Windows 7, Windows XP OS, PC registry settings, and performing Bios updates At least one of the following: A+ certified 2 yr. Technical Degree or equivalent 5+ years in same/similar industry/position 1+ years working on Rimage equipment Depot Repair Parts typically replaced at the Rimage factory service center. Requires special tools and training: Work normally performed by a Rimage Depot Technician Replacements not recommend to be performed by end users. Requires specialized training, and experience Requires special tools and training. Expert in: Windows OS and PC network administration Comfortable with replacing general PC-type components and performing fine mechanical adjustments Understands Windows 10, Windows 7, Windows XP OS, PC registry settings, and performing Bios updates At least one of the following: A+ certified 2 yr. Technical Degree or equivalent 5+ years in same/similar industry/position 1+ years working on Rimage equipment Parts can not be returned. All purchases are final. Field and Depot level parts do not ship with installation instructions and are intended to be replaced by a Rimage employee. * Parts are not returnable items. All sales are final. Page 11