Advanced Applications of Fluid Dynamics and Structural Mechanics Simulation in the Upstream Oil and Gas Industry. Introduction
|
|
- Isabel Sherman
- 6 years ago
- Views:
Transcription
1 Advanced Applications of Fluid Dynamics and Structural Mechanics Simulation in the Upstream Oil and Gas Industry Introduction Gavin Butcher Account Manager ANSYS UK Ltd 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
2 Invitation The marketing for the seminar announced Computational Fluid Dynamics (CFD) and Computational Structural Mechanics (CSM) are extremely powerful tools to provide information and insight to engineers and scientists involved in the upstream oil and gas industry. This seminar will feature an introduction to the use of the ANSYS simulation tools in the industry followed by technical presentations from ANSYS UK and industry - speakers in the two themes of produced fluid and safety. Let s look at the agenda 2010 ANSYS, Inc. All rights reserved. 2 ANSYS, Inc. Proprietary
3 Today s agenda AGENDA Introduction and Welcome Gavin Butcher, ANSYS UK Overview - ANSYS Simulation Tools for the Upstream Oil and Gas Industry Technical Theme 1: Produced Fluid including guest presentation from Prospect Flow Solutions - Flow assurance and advanced multiphase flow simulation - Separation equipment, including coupling to motion analysis - Equipment structural integrity Phil Stopford, ANSYS UK Steven Varnam, ANSYS UK Coffee Break Technical Theme 2: Safety Assessment including guest presentation from MMI Engineering - Gas dispersion and ventilation - Fire modelling and smoke movement - Thermal radiation loading - Blast analysis and structural response - Helideck wind flow assessment Phil Stopford, ANSYS UK Steven Varnam, ANSYS UK Summary and Q&A 2010 ANSYS, Inc. All rights reserved. 3 ANSYS, Inc. Proprietary
4 ANSYS, the company ANSYS design, develop, market and globally support a wide range of Engineering simulation software Over 1600 people worldwide, 150 in the UK A suite of multi-purpose software technologies for Structural Mechanics Fluid Dynamics Electromagnetics Multiphysics 2010 ANSYS, Inc. All rights reserved. 4 ANSYS, Inc. Proprietary
5 Overview - ANSYS simulation tools ANSYS Software simulation tools relevant to today Fluid Dynamics ANSYS CFD (FLUENT/CFX) Structural Mechanics ANSYS Mechanical AUTODYN All three have concept of 3D geometry > Computational mesh > Boundary conditions > Solve > Results 2010 ANSYS, Inc. All rights reserved. 5 Courtesy ANSYS, Inc. of TU Proprietary Nord EV
6 Fluid Dynamics Fluid Dynamics ANSYS CFD (CFX/FLUENT) 3D geometry flow solvers Multiphase Combustion Thermal radiation Conduction Wide range of applications in flow assurance and safety Courtesy of Zeta-PDM Concentrations of heavygas in platform leg 2010 ANSYS, Inc. All rights reserved. 6 Courtesy ANSYS, Inc. of TU Proprietary Nord EV
7 Structural mechanics Structural Mechanics ANSYS Mechanical 3D geometry structural mechanics solver Deformation, strain and stress analysis of structures Used to analyse structural integrity of equipment and optimise designs Can be connected to ANSYS CFD for one-way and two-way fluid-structure-interaction analysis Stresses on separator structure under sloshing Stresses in complex pipe intersection 2010 ANSYS, Inc. All rights reserved. 7 Courtesy ANSYS, Inc. of TU Proprietary Nord EV
8 Structural Mechanics Explict Dynamics AUTODYN 3D geometry integrated Euler flow and structural mechanics solver High speed events Blast response Blast wave loading Structural response to blast Material failure Drop testing Impact Blast Response Drop test 2010 ANSYS, Inc. All rights reserved. 8 Courtesy ANSYS, Inc. of TU Proprietary Nord EV
9 Today s agenda AGENDA Introduction and Welcome Gavin Butcher, ANSYS UK Overview - ANSYS Simulation Tools for the Upstream Oil and Gas Industry Technical Theme 1: Produced Fluid including guest presentation from Prospect Flow Solutions - Flow assurance and advanced multiphase flow simulation - Separation equipment, including coupling to motion analysis - Equipment structural integrity Phil Stopford, ANSYS UK Steven Varnam, ANSYS UK Coffee Break Technical Theme 2: Safety Assessment including guest presentation from MMI Engineering - Gas dispersion and ventilation - Fire modelling and smoke movement - Thermal radiation loading - Blast analysis and structural response - Helideck wind flow assessment Phil Stopford, ANSYS UK Steven Varnam, ANSYS UK Summary and Q&A 2010 ANSYS, Inc. All rights reserved. 9 ANSYS, Inc. Proprietary
Engineering Simulation Software for the Offshore, Marine and Wave/Tidal Renewable Energy Industries. Introduction. Nigel Atkinson ANSYS UK Ltd
Engineering Simulation Software for the Offshore, Marine and Wave/Tidal Renewable Energy Industries Introduction Nigel Atkinson ANSYS UK Ltd 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
More informationSpeed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester
Speed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Content ANSYS CFD Introduction ANSYS, the company Simulation
More informationANSYS Fluid Structure Interaction for Thermal Management and Aeroelasticity
ANSYS Fluid Structure Interaction for Thermal Management and Aeroelasticity Phil Stopford Duxford Air Museum 11th May 2011 2011 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Fluid Structure
More informationin:flux - Intelligent CFD Software
in:flux - Intelligent CFD Software info@insightnumerics.com Fire and Gas Mapping. Optimized. Slide 1 Introduction to in:flux in:flux is a CFD software product to be used for dispersion and ventilation
More informationSimulation and Optimization in the wind energy industry
Simulation and Optimization in the wind energy industry Numerical Simulation & Optimization www.ozeninc.com/optimization optimization@ozeninc.com Summary Why to use numerical simulations and optimization?
More informationGeometry and meshing advances
HVAC CFD Update: Recent Projects and Developments at ANSYS UK Stephen McCormick Team Leader, Energy & Environment stephen.mccormick@ansys.com Gavin Butcher CFD Account Manager gavin.butcher@ansys.com 2009
More informationRecent Approaches of CAD / CAE Product Development. Tools, Innovations, Collaborative Engineering.
Recent Approaches of CAD / CAE Product Development. Tools, Innovations, Collaborative Engineering. 19 0 Seminario International de Alta Tecnologia 09 OUT 2014 TEATRO UNIMEP Campus Taquaral Piracicaba SP
More information2008 International ANSYS Conference
2008 International ANSYS Conference FEM AND FSI SIMULATIONS OF IMPACT LOADS ON GRP SUBSEA COMPOSITE COVERS Kjetil Rognlien, MSc Technical Consultant EDR AS, Norway 2008 ANSYS, Inc. All rights reserved.
More informationMay 11, ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary Inventory #
Chapter 1 ANSYS DesignModeler Introduction to Workbench 1-1 ANSYS Workbench Overview ANSYS Workbench comprises the following modules: Simulation for performing structural and thermal analyses using the
More informationCFD in COMSOL Multiphysics
CFD in COMSOL Multiphysics Christian Wollblad Copyright 2017 COMSOL. Any of the images, text, and equations here may be copied and modified for your own internal use. All trademarks are the property of
More informationANSYS - Workbench Overview. From zero to results. AGH 2014 April, 2014 W0-1
ANSYS - Workbench Overview From zero to results 2014 W0-1 Runing ANSYS WEiP ANSYS We are going to work in most advanced ANSYS Workbench W0-2 ANSYS Workbench WEiP What is Workbench? Platform for integration
More informationApplications of ICFD solver by LS-DYNA in Automotive Fields to Solve Fluid-Solid-Interaction (FSI) Problems
Applications of ICFD solver by LS-DYNA in Automotive Fields to Solve Fluid-Solid-Interaction (FSI) Problems George Wang(1 ), Facundo del Pin(2), Inaki Caldichoury (2), Prince Rodriguez(3), Jason Tippie
More informationANSYS AIM 16.0 Overview. AIM Program Management
1 2015 ANSYS, Inc. September 27, 2015 ANSYS AIM 16.0 Overview AIM Program Management 2 2015 ANSYS, Inc. September 27, 2015 Today s Simulation Challenges Leveraging simulation across engineering organizations
More informationINNOVATIVE CFD FOR SUPER-COMPUTER RESULTS ON YOUR DESKTOP
INNOVATIVE CFD FOR SUPER-COMPUTER RESULTS ON YOUR DESKTOP XFlow is a next generation CFD software that uses a proprietary, particle-based, meshless approach which can easily handle traditionally complex
More information2008 International ANSYS Conference Strongly Coupled FSI Simulation Moving Compressible Pressure Pulse through a Tube
2008 International ANSYS Conference Strongly Coupled FSI Simulation Moving Compressible Pressure Pulse through a Tube Daniel L. Cler, US Army RDECOM/ ARDEC/ WSEC/ Benet Labs 1 Overview Background Problem
More informationCHAPTER 4 CFD AND FEA ANALYSIS OF DEEP DRAWING PROCESS
54 CHAPTER 4 CFD AND FEA ANALYSIS OF DEEP DRAWING PROCESS 4.1 INTRODUCTION In Fluid assisted deep drawing process the punch moves in the fluid chamber, the pressure is generated in the fluid. This fluid
More informationModel Builder. Tree node settings. Graphics
COMSOL V4 The Desktop Model Builder Tree node settings Graphics Messages The Four Main Branch Types Definitions Model Study Results Tree n des define Tree nodes define sequences of operations Sequence
More informationAppendix P. Multi-Physics Simulation Technology in NX. Christian Ruel (Maya Htt, Canada)
251 Appendix P Multi-Physics Simulation Technology in NX Christian Ruel (Maya Htt, Canada) 252 Multi-Physics Simulation Technology in NX Abstract As engineers increasingly rely on simulation models within
More informationmidas NFX 2017R1 Release Note
Total Solution for True Analysis-driven Design midas NFX 2017R1 Release Note 1 midas NFX R E L E A S E N O T E 2 0 1 7 R 1 Major Improvements Midas NFX is an integrated finite element analysis program
More informationGlobal to Local Model Interface for Deepwater Top Tension Risers
Global to Local Model Interface for Deepwater Top Tension Risers Mateusz Podskarbi Karan Kakar 2H Offshore Inc, Houston, TX Abstract The water depths from which oil and gas are being produced are reaching
More informationDevelopment of a New Software Architecture for LS-DYNA Applications
12 th International LS-DYNA Users Conference Computing Technologies(1) Development of a New Software Architecture for LS-DYNA Applications Tim Palmer Engineering Technology Associates, Inc. Abstract Engineers
More informationCoupled Analysis of FSI
Coupled Analysis of FSI Qin Yin Fan Oct. 11, 2008 Important Key Words Fluid Structure Interface = FSI Computational Fluid Dynamics = CFD Pressure Displacement Analysis = PDA Thermal Stress Analysis = TSA
More informationRecent Approaches of CAD / CAE Product Development. Tools, Innovations, Collaborative Engineering.
Recent Approaches of CAD / CAE Product Development. Tools, Innovations, Collaborative Engineering. Author: Dr.-Ing. Peter Binde Abstract: In this paper, the latest approaches in the field of CAD-CAE product
More informationEnabling SMEs to benefit from HPC based OpenFOAM simulation services Carmen Cotelo, CESGA
Enabling SMEs to benefit from HPC based OpenFOAM simulation services Carmen Cotelo, CESGA fortissimo@cesga.es 2nd Iberian meeting of OpenFOAM technology users. Santiago de Compostela 28-29 May 2018 1 Fortissimo
More informationCREO SIMULATE ROADMAP. Jose Coronado Product Manager. SAXSIM 2017 Chemnitz, Germany. February 2017
CREO SIMULATE ROADMAP Jose Coronado Product Manager February 2017 SAXSIM 2017 Chemnitz, Germany AGENDA 1. Creo 5 Release 2. Pre-Processor 3. Engine 4. Post-Processor 5. Key proposed new extensions 6. Conclusions
More informationSimpleware: Converting 3D Images into Computational Models. David Harman (Application Engineer)
Simpleware: Converting 3D Images into Computational Models David Harman (Application Engineer) d.harman@simpleware.com Introduction Simpleware: The Company Developers of industry-leading software solutions
More informationAgenda. 9:00 Welcome. 1:00 - Computing Utilities. 9:15 - Mechanical Demonstration. 1:30 - CFD Update. 3:00 Break 3:15 ANSYS Customization Toolkit
Agenda 9:00 Welcome 1:00 - Computing Utilities Introductions What is new at CAEA 9:15 - Mechanical Demonstration CAD connection utilities (within the CAD API) Mechanical setup Rigid Bodies, Joints, contact,
More informationLS-DYNA 980 : Recent Developments, Application Areas and Validation Process of the Incompressible fluid solver (ICFD) in LS-DYNA.
12 th International LS-DYNA Users Conference FSI/ALE(1) LS-DYNA 980 : Recent Developments, Application Areas and Validation Process of the Incompressible fluid solver (ICFD) in LS-DYNA Part 1 Facundo Del
More informationIntroduction to Abaqus/CFD for Multiphysics Applications
Introduction to Abaqus/CFD for Multiphysics Applications R 6.12 About this Course Course objectives Upon completion of this course you will be able to: Set up and create CFD and FSI models with Abaqus
More informationApplications of ICFD /SPH Solvers by LS-DYNA to Solve Water Splashing Impact to Automobile Body. Abstract
Applications of ICFD /SPH Solvers by LS-DYNA to Solve Water Splashing Impact to Automobile Body George Wang (1 ), Kevin Gardner (3), Eric DeHoff (1), Facundo del Pin (2), Inaki Caldichoury (2), Edouard
More informationFacundo DEL PIN / Iñaki ÇALDICHOURY / Rodrigo PAZ / / Livermore Software Technology Corporation
LS-DYNA R R7 : Strong Fluid Structure Interaction (FSI) capabilities and associated meshing tools for the incompressible CFD solver (ICFD), applications and examples Facundo DEL PIN / Iñaki ÇALDICHOURY
More informationSOLIDWORKS SIMULATION
SOLIDWORKS SIMULATION Innovation is about taking chances, not taking risks Scootchi by Curventa Designworks LTD What if? is the question that fuels innovation. SolidWorks Simulation software takes the
More informationStructural Nonlinear Analysis of a Disconnector Pelikelo (a kind of hook) using ANSYS/Workbench
Structural Nonlinear Analysis of a Disconnector Pelikelo (a kind of hook) using ANSYS/Workbench Mário Coutinho MCS Engineering LTDA. Fátima Souza, M.Sc., Gabriel Silva e Decio Paiva SOFTEC Software Technology
More informationCoupling GT-SUITE and TAITherm to Accelerate Cabin Simulations
Coupling GT-SUITE and TAITherm to Accelerate Cabin Simulations Dan Marsh Product and Applications Engineer Gamma Technologies LLC d.marsh@gtisoft.com Jon Juszkiewicz Thermal/CFD Engineer ThermoAnalytics
More informationIntroduction to OpenFOAM at SIMDI 06
Introduction to OpenFOAM at SIMDI 06 Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom Introduction to OpenFOAM at SIMDI 06 p.1/20 Open Source CFD Platform OpenFOAM: Open Source Computational
More informationOverview and Recent Developments of Dynamic Mesh Capabilities
Overview and Recent Developments of Dynamic Mesh Capabilities Henrik Rusche and Hrvoje Jasak h.rusche@wikki-gmbh.de and h.jasak@wikki.co.uk Wikki Gmbh, Germany Wikki Ltd, United Kingdom 6th OpenFOAM Workshop,
More informationTryItNow! Step by Step Walkthrough: Spoiler Support
TryItNow! Step by Step Walkthrough: Spoiler Support 1 2015 ANSYS, Inc. March 28, 2016 TryItNow! Step by Step Walkthrough: Spoiler Support ANSYS designed this TryItNow! experience to give you quick access
More informationHPC and IT Issues Session Agenda. Deployment of Simulation (Trends and Issues Impacting IT) Mapping HPC to Performance (Scaling, Technology Advances)
HPC and IT Issues Session Agenda Deployment of Simulation (Trends and Issues Impacting IT) Discussion Mapping HPC to Performance (Scaling, Technology Advances) Discussion Optimizing IT for Remote Access
More informationMSC Software: Release Overview - MSC Nastran MSC Nastran 2014 RELEASE OVERVIEW
MSC Nastran 2014 Welcome to MSC Nastran 2014! Welcome to MSC Nastran 2014! The MSC Nastran 2014 release is focused on delivering new capabilities and performance required to solve multidisciplinary problems.
More informationsuite nventium From Concept to Product
I suite nventium From Concept to Product Image Courtesy of WorldAutoSteel Enterprise Product Development Solution From Concept to Product The Inventium Suite is an enterprise product development solution.
More informationA hybrid slurry CFD model: Euler-Euler to Euler-Lagrange
5th-6th December 2016 A hybrid slurry CFD model: Euler-Euler to Euler-Lagrange Alasdair Mackenzie Weir Advanced Research Centre, University of Strathclyde, Glasgow, Scotland Outline Background, context
More informationSystem Level Cooling, Fatigue, and Durability. Co-Simulation. Stuart A. Walker, Ph.D.
System Level Cooling, Fatigue, and Durability Analysis via Multiphysics Co-Simulation Stuart A. Walker, Ph.D. swalker@altair.com Outline Motivation Presentation of process Presentation of tools Presentation
More informationUsing the Workbench LS-DYNA Extension
Using the Workbench LS-DYNA Extension ANSYS, Inc. Southpointe 2600 ANSYS Drive Canonsburg, PA 15317 ansysinfo@ansys.com http://www.ansys.com (T) 724-746-3304 (F) 724-514-9494 Release 18.1 April 2017 ANSYS,
More informationCommercial Implementations of Optimization Software and its Application to Fluid Dynamics Problems
Commercial Implementations of Optimization Software and its Application to Fluid Dynamics Problems Szymon Buhajczuk, M.A.Sc SimuTech Group Toronto Fields Institute Optimization Seminar December 6, 2011
More informationXFlow HIGH FIDELITY COMPUTATIONAL FLUID DYNAMICS
XFlow HIGH FIDELITY COMPUTATIONAL FLUID DYNAMICS XFlow OVERVIEW In the traditional mesh-based approach to solving Computational Fluid Dynamics (CFD) problems, reliability is highly dependent on the quality
More information"The real world is nonlinear"... 7 main Advantages using Abaqus
"The real world is nonlinear"... 7 main Advantages using Abaqus FEA SERVICES LLC 6000 FAIRVIEW ROAD, SUITE 1200 CHARLOTTE, NC 28210 704.552.3841 WWW.FEASERVICES.NET AN OFFICIAL DASSAULT SYSTÈMES VALUE
More informationInvestigation of mixing chamber for experimental FGD reactor
Investigation of mixing chamber for experimental FGD reactor Jan Novosád 1,a, Petra Danová 1 and Tomáš Vít 1 1 Department of Power Engineering Equipment, Faculty of Mechanical Engineering, Technical University
More informationAutodesk Simulation Multiphysics
Autodesk Simulation Multiphysics Course Length: 2 days This course will introduce you to performing computational fluid dynamics (CFD) analyses on 3-D models. All of the available load and constraint options
More informationSoftware Solutions for the Design and Simulation of Electric Machines. Dr. Markus Anders, CD-adapco
Software Solutions for the Design and Simulation of Electric Machines Dr. Markus Anders, CD-adapco Agenda Software for Electric Machine Design and Simulation: About SPEED SPEED& JMAG SPEED& STAR-CCM+,
More informationAdvanced Computation in the design and development of aircraft engines. Serge Eury SNECMA
Advanced Computation in the design and development of aircraft engines 1 Serge Eury SNECMA Advanced Computation in the design and development of aircraft engines Introduction Some examples Conclusions
More informationWebinar: TwinMesh for Reliable CFD Analysis of Rotating Positive Displacement Machines
Webinar: TwinMesh for Reliable CFD Analysis of Rotating Positive Displacement Machines 14.07.2015 Dipl.-Ing. Jan Hesse Jan.hesse@cfx-berlin.de CFX Berlin Software GmbH Karl-Marx-Allee 90 A 10243 Berlin
More informationCDA Workshop Physical & Numerical Hydraulic Modelling. STAR-CCM+ Presentation
CDA Workshop Physical & Numerical Hydraulic Modelling STAR-CCM+ Presentation ENGINEERING SIMULATION CFD FEA Mission Increase the competitiveness of companies through optimization of their product development
More informationRealize Your Product Promise. Icepak
Realize Your Product Promise Icepak ANSYS Icepak delivers powerful technology for electronics thermal management. Simulating high-performance electronics cooling readily solves challenges in this rapidly
More informationAutomotive Fluid-Structure Interaction (FSI) Concepts, Solutions and Applications. Laz Foley, ANSYS Inc.
Automotive Fluid-Structure Interaction (FSI) Concepts, Solutions and Applications Laz Foley, ANSYS Inc. Outline FSI Classifications FSI Solutions FSI Modeling Approaches ANSYS Workbench for FSI System
More informationComputational Fluid Dynamics PRODUCT SHEET
TM 2014 Computational Fluid Dynamics PRODUCT SHEET 1 Breaking Limitations The Challenge of Traditional CFD In the traditional mesh-based approach, the reliability highly depends on the quality of the mesh,
More informationModeling of Laminar Flow Static Mixers
Modeling of Laminar Flow Static Mixers Nagi Elabbasi, Xiaohu Liu, Stuart Brown ( ) Mike Vidal, Matthew Pappalardo (Nordson EFD) COMSOL Conference 2012, Boston, MA Excerpt from the Proceedings of the 2012
More informationMRI Induced Heating of a Pacemaker. Peter Krenz, Application Engineer
MRI Induced Heating of a Pacemaker Peter Krenz, Application Engineer 1 Problem Statement Electric fields generated during MRI exposure are dissipated in tissue of the human body resulting in a temperature
More informationCoupling OpenFOAM and MBDyn with precice coupling tool
Coupling OpenFOAM and MBDyn with precice coupling tool Mikko Folkersma Faculty of Aerospace Engineering Section of Wind Energy Delft University of Technology Delft, The Netherlands Outline 1. Introduction
More informationEngineering Simulation Software for the Offshore, Marine and Wave/Tidal Renewable Energy Industries. Viscous CFD Applications. Phil Stopford ANSYS UK
Engineering Simulation Software for the Offshore, Marine and Wave/Tidal Renewable Energy Industries Viscous CFD Applications Phil Stopford ANSYS UK 2011 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
More information: What is Finite Element Analysis (FEA)?
Q: What is Finite Element Analysis (FEA)? A1: It is a numerical technique for finding approximate solutions of partial differential equations (PDE) as well as of integral equations. The solution approach
More informationFire and Smoke Modelling Matthieu Stasia, Fred Mendonça 24 th June 2014 CD-adapco
Fire and Smoke Modelling Matthieu Stasia, Fred Mendonça 24 th June 2014 CD-adapco Contents Overview Fire and Smoke Wizard Model settings for the Murcia Atrium Benchmark Sensitivity analysis on Murcia Atrium
More informationShape optimisation using breakthrough technologies
Shape optimisation using breakthrough technologies Compiled by Mike Slack Ansys Technical Services 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Introduction Shape optimisation technologies
More informationFundamentals of Modeling with Simcenter 3D Robin Boeykens
Fundamentals of Modeling with Simcenter 3D Robin Boeykens robin.boeykens@siemens.com Realize innovation. 3D CAE for the digital twin Simcenter 3D Page 2 Simcenter 3D Engineering Desktop Simcenter 3D Engineering
More information2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
Bi-directional Automatic Electromagnetic-Thermal Coupling for HEV/EV Traction Motor Design Using Maxwell and ANSYS Mechanical Peng Yuan Eric Lin Zed (Zhangjun) Tang ANSYS, Inc. 2010 ANSYS, Inc. All rights
More informationParametric Study of Sloshing Effects in the Primary System of an Isolated LFR Marti Jeltsov, Walter Villanueva, Pavel Kudinov
1 Parametric Study of Sloshing Effects in the Primary System of an Isolated LFR 19.06.2013 Marti Jeltsov, Walter Villanueva, Pavel Kudinov Division of Nuclear Power Safety Royal Institute of Technology
More informationOn best practice for CFD in the oil and gas sector Technical safety applications
On best practice for CFD in the oil and gas sector 1 On best practice for CFD in the oil and gas sector Technical safety applications Dr Prankul Middha 4 th May 2017 Abercus On best practice for CFD in
More informationIntroduction to ANSYS Meshing. Workshop plan
Lecture 2 Introduction to ANSYS Meshing 2014 W2-1 Schedule WEiP Workshop plan Week 1 - Quick start in ANSYS Week 2 Geometry DesignModeler (DM) Week 3 Mesh Meshing Week 4 Solver FLUENT/CFX Week 5 - Post
More informationANSYS Discovery Live- Getting Started
ANSYS Discovery Live- Getting Started Every engineer deserves the power of Discovery ANSYS Discovery Live provides instantaneous simulation, tightly coupled with direct geometry modeling, to enable interactive
More information2008 International ANSYS Conference
2008 International ANSYS Conference AUTODYN Simulation of Blasting at Pointe du Bois Generating Station Nick Rapolti Engineering Analyst SimuTech Group - Toronto Ryan Penner, P.Eng. Project Engineer Manitoba
More informationTENDER FOR PURCHASE OF LICENSES OF FINITE ELEMENT ANALYSIS PROGRAM SPECIFICATIONS
TENDER FOR PURCHASE OF LICENSES OF FINITE ELEMENT ANALYSIS PROGRAM SPECIFICATIONS 1. OVERVIEW 1.1. These specifications identify the minimum requirements for the Licenses of two Finite Element Analysis
More informationAvailable online at ScienceDirect. Procedia Engineering 111 (2015 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 111 (2015 ) 115 120 XXV R-S-P seminar, Theoretical Foundation of Civil Engineering (24RSP) (TFoCE 2015) Numerical simulation
More information30 th Anniversary Event. New features in Opera By Nigel Atkinson, PhD. OPTIMIZER Automatically selects and manages multiple goalseeking
FEA ANALYSIS General-purpose multiphysics design and analysis software for a wide range of applications OPTIMIZER Automatically selects and manages multiple goalseeking algorithms INTEROPERABILITY Built-in
More informationA hybrid slurry CFD model: Euler-Euler to Euler-Lagrange (in development)
MacKenzie, Alasdair (2017) A hybrid slurry CFD model : Euler-Euler to Euler-Lagrange (in development). In: 5th United Kingdom & Éire OpenFOAM User Meeting, 2017-01-16-2017-01-17, University College Dublin.,
More informationWeek 12 - Lecture Mechanical Event Simulation. ME Introduction to CAD/CAE Tools
Week 12 - Lecture Mechanical Event Simulation Lecture Topics Mechanical Event Simulation Overview Additional Element Types Joint Component Description General Constraint Refresh Mesh Control Force Estimation
More informationANSYS HPC. Technology Leadership. Barbara Hutchings ANSYS, Inc. September 20, 2011
ANSYS HPC Technology Leadership Barbara Hutchings barbara.hutchings@ansys.com 1 ANSYS, Inc. September 20, Why ANSYS Users Need HPC Insight you can t get any other way HPC enables high-fidelity Include
More informationAdjoint Solver Workshop
Adjoint Solver Workshop Why is an Adjoint Solver useful? Design and manufacture for better performance: e.g. airfoil, combustor, rotor blade, ducts, body shape, etc. by optimising a certain characteristic
More informationMesh Morphing and the Adjoint Solver in ANSYS R14.0. Simon Pereira Laz Foley
Mesh Morphing and the Adjoint Solver in ANSYS R14.0 Simon Pereira Laz Foley 1 Agenda Fluent Morphing-Optimization Feature RBF Morph with ANSYS DesignXplorer Adjoint Solver What does an adjoint solver do,
More information3-D Design Flow Automation for HFSS. Jim DeLap Technical Manager
3-D Design Flow Automation for HFSS Jim DeLap Technical Manager jim.delap@ansys.com 1 Motivation Existing methods of defining 3D models within HFSS have been sufficient since the introduction of the product
More informationOzenCloud Case Studies
OzenCloud Case Studies Case Studies, April 20, 2015 ANSYS in the Cloud Case Studies: Aerodynamics & fluttering study on an aircraft wing using fluid structure interaction 1 Powered by UberCloud http://www.theubercloud.com
More informationThermal Coupling Method Between SPH Particles and Solid Elements in LS-DYNA
Thermal Coupling Method Between SPH Particles and Solid Elements in LS-DYNA INTRODUCTION: Jingxiao Xu, Jason Wang LSTC Heat transfer is very important in many industrial and geophysical problems. Many
More informationANSYS HPC Technology Leadership
ANSYS HPC Technology Leadership 1 ANSYS, Inc. November 14, Why ANSYS Users Need HPC Insight you can t get any other way It s all about getting better insight into product behavior quicker! HPC enables
More informationUse of STAR-CCM+ in Marine and Off-Shore Engineering - Key Features and Future Developments - M. Perić, F. Schäfer, E. Schreck & J.
Use of STAR-CCM+ in Marine and Off-Shore Engineering - Key Features and Future Developments - M. Perić, F. Schäfer, E. Schreck & J. Singh Contents Main features of STAR-CCM+ relevant for marine and offshore
More informationComplete and robust mechanical simulation solution. imaginit.com/simulation-mechanical
Complete and robust mechanical simulation solution A mechanical simulation solution for finite element analysis powered by the Autodesk Nastran solver Accurately predict product behavior, optimize and
More informationRecent Developments and Roadmap Part 0: Introduction. 12 th International LS-DYNA User s Conference June 5, 2012
Recent Developments and Roadmap Part 0: Introduction 12 th International LS-DYNA User s Conference June 5, 2012 1 Outline Introduction Recent developments. See the separate PDFs for: LS-PrePost Dummies
More informationAvailable online at ScienceDirect. Procedia Engineering 136 (2016 ) Dynamic analysis of fuel tank
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 136 (2016 ) 45 49 The 20 th International Conference: Machine Modeling and Simulations, MMS 2015 Dynamic analysis of fuel tank
More informationimaginit.com/simulation Complete and robust mechanical simulation solution
imaginit.com/simulation Complete and robust mechanical simulation solution A mechanical simulation solution for finite imaginit.com/simulation element analysis powered by the Autodesk Nastran solver Accurately
More informationCFD Simulation of a dry Scroll Vacuum Pump including Leakage Flows
CFD Simulation of a dry Scroll Vacuum Pump including Leakage Flows Jan Hesse, Rainer Andres CFX Berlin Software GmbH, Berlin, Germany 1 Introduction Numerical simulation results of a dry scroll vacuum
More informationcomputational Fluid Dynamics - Prof. V. Esfahanian
Three boards categories: Experimental Theoretical Computational Crucial to know all three: Each has their advantages and disadvantages. Require validation and verification. School of Mechanical Engineering
More informationCHAPTER 8 FINITE ELEMENT ANALYSIS
If you have any questions about this tutorial, feel free to contact Wenjin Tao (w.tao@mst.edu). CHAPTER 8 FINITE ELEMENT ANALYSIS Finite Element Analysis (FEA) is a practical application of the Finite
More informationIntroduction to Abaqus. About this Course
Introduction to Abaqus R 6.12 About this Course Course objectives Upon completion of this course you will be able to: Use Abaqus/CAE to create complete finite element models. Use Abaqus/CAE to submit and
More informationDynamic Mesh Handling in OpenFOAM
Dynamic Mesh Handling in OpenFOAM p. 1/18 Dynamic Mesh Handling in OpenFOAM Hrvoje Jasak h.jasak@wikki.co.uk, hrvoje.jasak@fsb.hr Wikki Ltd, United Kingdom and FSB, University of Zagreb, Croatia 47th AIAA
More informationThank you for downloading one of our ANSYS whitepapers we hope you enjoy it.
Thank you! Thank you for downloading one of our ANSYS whitepapers we hope you enjoy it. Have questions? Need more information? Please don t hesitate to contact us! We have plenty more where this came from.
More informationMarine Hydrodynamics Solver in OpenFOAM
Marine Hydrodynamics Solver in OpenFOAM p. 1/14 Marine Hydrodynamics Solver in OpenFOAM Hrvoje Jasak and Henrik Rusche h.jasak@wikki.co.uk, h.rusche@wikki.co.uk Wikki, United Kingdom and Germany 4 December
More informationQuality Assurance Benchmarks. EDF s CFD in-house codes: Code_Saturne and NEPTUNE_CFD
Quality Assurance Benchmarks EDF s CFD in-house codes: Code_Saturne and NEPTUNE_CFD Outlines General presentation of Code_Saturne and NEPTUNE_CFD Code_Saturne has been developed since 1998, based on older
More informationCustomisation and Automation using the LUSAS Programmable Interface (LPI)
Customisation and Automation using the LUSAS Programmable Interface (LPI) LUSAS Programmable Interface The LUSAS Programmable Interface (LPI) allows the customisation and automation of modelling and results
More informationAppendix B Submodeling Technique
Appendix B Submodeling Technique 16.0 Release Introduction to ANSYS Mechanical 1 2015 ANSYS, Inc. February 27, 2015 Chapter Overview In this chapter controlling meshing operations is described. Topics:
More informationPre-compiled applications and utilities in OpenFOAM
Pre-compiled applications and utilities in OpenFOAM Tommaso Lucchini Department of Energy Politecnico di Milano Learning outcome You will learn... the meaning of the words applications, solvers, and utilities
More informationComposites for JEC Conference. Zach Abraham ANSYS, Inc.
Composites for JEC Conference Zach Abraham ANSYS, Inc. 1 Our Strategy Simulation-Driven Product Development Fluid Dynamics Structural Mechanics Explicit Dynamics Low-Frequency Electromagnetics High-Frequency
More informationStress Concentration Factors
CONSEIL INTERNATIONAL DES MACHINES A COMBUSTION INTERNATIONAL COUNCIL ON COMBUSTION ENGINES CO-ORDINATING WORKING GROUP "CLASSIFICATION SOCIETIES DIESEL" (WG2) Proposal by CIMAC WG4 11th May 2012 IACS
More informationThermal Stress Analysis
Thermal Stress Analysis Determine the temperature-induced stresses in a disk brake rotor. Lesson: Thermal Stress Analysis of a Disk Brake Rotor In this exercise we'll perform a Thermal Stress analysis
More information