MiCOM P40 Agile P442, P444

Transcription

1 MiCOM P40 Agile P442, P444 MICS Model Implementation Conformance Statement Platform Hardware Version: M Platform Software Version: 82 Publication Reference: P442&4/EN MC/Ha6 - ALSTOM All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited.

2

3 MiCOM P40 Agile P442, P444 MICS CONTENTS 1 MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) Introduction Objective Logical Device definitions IEC Logical Device data model Logical Node definitions Logical Node: CILO_INTERLOCK Logical Node: CSWI_BASIC Logical Node: GGIO_ALM_ Logical Node: GGIO_IND_ Logical Node: GGIO_IND_ Logical Node: GGIO_IND_ Logical Node: GGIO_IND_ Logical Node: GGIO_IND_32_CTRL Logical Node: GGIO_IND_ Logical Node: GGIO_IND_ Logical Node: ITPC_SYSTEM Logical Node: Logical Node: LLN0_STANDARD Logical Node: LLN0_STANDARD_MEA Logical Node: LLN0_STANDARD_WITH_CTRLMOD Logical Node: LLN0_SYSTEM Logical Node: LPHD_STANDARD Logical Node: LPHD_SYSTEM Logical Node: LSVS_SYSTEM Logical Node: MLFR_FAULT_RECORD Logical Node: MMXU_FOURIER Logical Node: MSQI_ALL Logical Node: MSTA_I_W_VAR Logical Node: PDIS_BASIC Logical Node: PDOP_BASIC Logical Node: PSCH_EXT Logical Node: PSCH_EXTENSION Logical Node: PSOF_BASIC Logical Node: PTOC_NEU Logical Node: PTOC_NO_SEG Logical Node: PTOC_SEG Logical Node: PTOF_NO_SEG Logical Node: PTOV_NEU Logical Node: PTOV_SEG Logical Node: PTRC_GLOBAL Logical Node: PTRC_INDIVID_NO_SEG 32 P442&4/EN MC/Ha6 1

4 MICS MiCOM P40 Agile P442, P Logical Node: PTRC_INDIVID_SEG Logical Node: PTTR_NO_SEG Logical Node: PTUC_BASIC Logical Node: PTUF_NO_SEG Logical Node: PTUV_SEG Logical Node: RBRF_EXTTRIP Logical Node: RDRE_BASIC Logical Node: RFLO_BASIC Logical Node: RPSB_BASIC Logical Node: RREC_NO_SEG Logical Node: RSYN_DIFCLC_ENH Logical Node: TVTR_SYSTEM Logical Node: XCBR_BASIC Logical Node: XCBR_BASIC_3P Common Data Class definitions Common Data Class: ACD_NEU Common Data Class: ACD_NO_SEG Common Data Class: ACD_NO_SEG_DN Common Data Class: ACD_SEG Common Data Class: ACD_SEG_NEU Common Data Class: ACT_NEU Common Data Class: ACT_NO_SEG Common Data Class: ACT_NO_SEG_DN Common Data Class: ACT_SEG Common Data Class: ACT_SEG_NEU Common Data Class: BCR_PRIV Common Data Class: CMV_MAG_ANG_FLOAT Common Data Class: CMV_MAG_FLOAT Common Data Class: DEL_SEG_ANG Common Data Class: DPC_CTRL Common Data Class: DPC_STATUS Common Data Class: DPL_PRIV Common Data Class: DPL_STANDARD Common Data Class: ENC_CTRL_LD_MOD Common Data Class: ENC_CTRL_LD_MOD_ Common Data Class: ENC_MOD_THREE_STATUS Common Data Class: ENC_MOD_THREE_STATUS_DN Common Data Class: ENC_MOD_TWO_STATUS Common Data Class: ENC_MOD_TWO_STATUS_DN Common Data Class: ENS_AUTORECST Common Data Class: ENS_BEH_FOUR_STATUS Common Data Class: ENS_BEH_FOUR_STATUS_DN Common Data Class: ENS_BEH_THREE_STATUS Common Data Class: ENS_BEH_THREE_STATUS_DN Common Data Class: ENS_CBCAP Common Data Class: ENS_HEALTH 45 2 P442&4/EN MC/Ha6

5 MiCOM P40 Agile P442, P444 MICS Common Data Class: ENS_HEALTH_DN Common Data Class: INC_STD Common Data Class: INS_BASIC Common Data Class: LPL_LLN Common Data Class: LPL_LLN0_MEA Common Data Class: LPL_LN Common Data Class: LPL_LN_PRIV Common Data Class: MV_FLOAT Common Data Class: MV_FLOAT_DN Common Data Class: MV_FLOAT_PRIV Common Data Class: ORG_SRC_REF Common Data Class: SEQ_MAG_FLOAT Common Data Class: SPC_CONTROL Common Data Class: SPC_CTRL_PRIV Common Data Class: SPC_STATUS Common Data Class: SPS_D Common Data Class: SPS_WD Common Data Class: SPS_WD_PRIV Common Data Class: WYE_RES_ANG_D Common Data Class: WYE_SEG Common Data Class: WYE_SEG_D_PRIV Common Data Class: WYE_SEG_RES_D Common data attribute type definitions Component: AnalogueValue_Float Component: Originator Component: RangeConfig_DeadBand Component: Unit_Multiplier Component: Vector_Magnitude_Float Component: Vector_MagnitudeAngle_Float Enumerated type definitions Enumerated type: AddCause Enumerated type: AutoRecSt Enumerated type: Beh_ Enumerated type: Beh_ Enumerated type: CBOpCap Enumerated type: ctlmodel Enumerated type: Dbpos Enumerated type: dir Enumerated type: Health Enumerated type: Mod_ Enumerated type: Mod_ Enumerated type: multiplier Enumerated type: orcategory Enumerated type: seqt Enumerated type: SIUnit MMS data-type conversions 58 P442&4/EN MC/Ha6 3

6 MICS MiCOM P40 Agile P442, P444 4 P442&4/EN MC/Ha6

7 MiCOM P40 Agile P442, P444 MICS 1 MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) 1.1 Introduction This specification is the Model Implementation Conformance Statement (MICS) and presents the top-level IEC data model that has been implemented. The definitions of all used Logical Nodes and their associated Common Data Classes, components and associated enumerated values are also included for completeness. The reader is expected to be conversant with the terminology presented within the IEC part 7 series of specifications. 1.2 Objective To provide comprehensive details of the standard data object model elements supported by the device. The MICS is conformant to the devices associated ICD (Substation Configuration Language) file, according to part 6 of the IEC standards. The layout of the presented tables within this document are conformant to the part 7 series of the IEC standard specifications with the following exceptions: The "Trigger Options" field is not presented The "M/O" field is not present as the definitions are as deployed within the model An additional column "X" is used to signify ALSTOM custom attributes 1.3 Logical Device definitions The MiCOM relay implements an IEC server that can contain one or more Logical Devices. Each Logical Device contains a data model built from instances of specific Logical Nodes and must consist of at least an instance of the LPHD Logical Node (which is responsible for providing physical device information) and an instance of the LLN0 Logical Node (for addressing common issues across the Logical Device). The IEC data model is contained within the Logical Devices detailed in the table below. All MiCOM devices will name the supported Logical Devices consistently to ensure that data model variables with the same purpose will have the same name within each MiCOM server. Logical Device AutoControl AutoRec AutoSynChk CBControl CtlCB CtlCBFail Measurements ProtAuv ProtDis Protection ProtEfa ProtEfd ProtEfp ProtFrq ProtNegSeq ProtNvd Comment/Usage Command and controls used for Automatical Control Auto Reclose Control Domain Automatically Synchronism Check Control Domain for CB Commands and controls for CB Control CB CBFail Control Domain Power System Measurements Aided UnderVoltage (PAP) Protection Domain Distance Protection Domain Protection Elements Aided Earth Fault Protection Domain Derived Earth Fault Protection Domain Zero Sequence Power Protection Domain Frequency Protection Domain Negative Sequence Protection Domain Residual Voltage Protection Domain P442&4/EN MC/Ha6 5

8 MICS MiCOM P40 Agile P442, P444 Logical Device ProtOvCur ProtOvThm ProtPsof ProtPwrSwgBlk ProtUcCur ProtUsr ProtVtp Records System Overcurrent Protection Domain Over Thermal Protection Domain Switch onto Fault Protection Domain Protection Power swing Blocking Undercurrent Protection Domain User Protection Domain Time-voltage Protection Domain Records Domain System Domain Comment/Usage IEC Logical Device data model The IEC Logical Device top-level data model consists of instances of Logical Nodes. The data model name for a Logical Node instance is constructed from an optional prefix (known as the wrapper), the Logical Node name, and an instance ID (or suffix). The presented data model is in an alphabetically sorted order, rather than a logical order, because this is the natural order of the data when presented by a native MMS browser. (Higher level browsers can of course impart any ordering that they desire). LD LN Instance LN Type Description AutoControl LLN0 LLN0_STANDARD AutoControl Logical Device LPHD1 LPHD_STANDARD Px40 Physical Device Information AutoRec ArcRREC1 RREC_NO_SEG Auto Reclose Control Domain for CB LLN0 Logical Device for Auto Reclose Control LLN0_STANDARD_WITH_CTRLMO in CB DAutoSynChk AscRSYN1 RSYN_DIFCLC_ENH System Checks - Check Sync LLN0 Logical Device for CB Automatical LLN0_STANDARD_WITH_CTRLMO Synchronism Check Control DCBControl LLN0 LLN0_STANDARD CBControl Logical Device LPHD1 LPHD_STANDARD Px40 Physical Device Information CtlCB CBPTRC1 PTRC_GLOBAL Protection trip for CB Control CILO1 CILO_INTERLOCK Circuit Breaker Interlocking for CB CSWI1 CSWI_BASIC Switch Controller for CB LLN0 LLN0_STANDARD Logical Device For CB Control XCBR1 XCBR_BASIC Circuit Breaker Monitoring (Pole 1) XCBR2 XCBR_BASIC Circuit Breaker Monitoring (Pole 2) XCBR3 XCBR_BASIC Circuit Breaker Monitoring (Pole 3) XCBR4 XCBR_BASIC_3P Circuit Breaker Monitoring for 3-pole CtlCBFail CBfPTRC14 PTRC_INDIVID_NO_SEG Protection trip for CB Fail CBfRBRF1 RBRF_EXTTRIP CB Fail 1 CBfRBRF2 RBRF_EXTTRIP CB Fail 2 6 P442&4/EN MC/Ha6

9 MiCOM P40 Agile P442, P444 MICS LD LN Instance LN Type Description DMeasurements ProtAuv ProtDis DProtection ProtEfa DProtEfd LLN0 LLN0_STANDARD_WITH_CTRLMO Logical Device for CB Fail Control LLN0 LLN0_STANDARD_MEA Measurements Logical Device LPHD1 LPHD_STANDARD Physical Device Information PriFltMLFR1 MLFR_FAULT_RECORD Measurements during the Latest Fault Record PriFouMMXU1 MMXU_FOURIER Primary Fourier Measurements PriMSQI1 MSQI_ALL Primary Sequence Measurements PriMSTA1 MSTA_I_W_VAR Primary Metering Statistics SecFouMMXU1 MMXU_FOURIER Secondary Fourier Measurements SecMSQI1 MSQI_ALL Secondary Sequence Measurements SecMSTA1 MSTA_I_W_VAR Secondary Metering Statistics AuvPSCH1 PSCH_EXT2 Aided UnderVoltage Scheme AuvPTRC3 PTRC_INDIVID_SEG Aided UnderVoltage (PAP) AuvPTUV1 PTUV_SEG Aided UnderVoltage Protection (PAP) LLN0 LLN0_STANDARD Aided Undervoltage Protection DisPDIS1 PDIS_BASIC Zone 1 Ph/Gnd Distance DisPDIS2 PDIS_BASIC Zone 2 Ph/Gnd Distance DisPDIS3 PDIS_BASIC Zone 3 Ph/Gnd Distance DisPDIS4 PDIS_BASIC Zone 4 Ph/Gnd Distance DisPDIS5 PDIS_BASIC Zone P Ph/Gnd Distance DisPDIS6 PDIS_BASIC Zone 1x Ph/Gnd Distance DisPDIS7 PDIS_BASIC Zone Q Ph/Gnd Distance DisPSCH1 PSCH_EXTENSION Distance Aided Scheme Protection DisPTRC2 PTRC_INDIVID_SEG Protection trip for Distance Protection LLN0 LLN0_STANDARD_WITH_CTRLMO Logical Device for Distance Protection LLN0 LLN0_STANDARD Protection Logical Device with Standard Template LPHD1 LPHD_STANDARD Physical Device Information EfaPSCH1 PSCH_EXT2 Aided Directionnal Earth Fault Scheme EfaPTOC1 PTOC_SEG Directionnal Earth Fault Aided Protection EfaPTRC6 PTRC_INDIVID_SEG Protection for Directionnal Earth fault Aided LLN0 LLN0_STANDARD_WITH_CTRLMO Logical Device for SEF Protection EfdPTOC1 PTOC_NEU IN1> 1 Earth Fault EfdPTOC2 PTOC_NEU IN1> 2 Earth Fault EfdPTOC3 PTOC_NEU IN1> 3 Earth Fault EfdPTOC4 PTOC_NEU IN1> 4 Earth Fault EfdPTRC7 PTRC_INDIVID_NO_SEG Protection trip for Earth Fault (Derived) protection P442&4/EN MC/Ha6 7

10 MICS MiCOM P40 Agile P442, P444 LD LN Instance LN Type Description LLN0 LLN0_STANDARD_WITH_CTRLMO Logical Device for Efd Protection DProtEfp EfdPDOP1 PDOP_BASIC Directional Zero Sequence Overpower Protection LLN0 Logical Device for Frequency Rate LLN0_STANDARD_WITH_CTRLMO Change Protection D PowEfdPTRC11 PTRC_INDIVID_NO_SEG Protection Trip for Zero Sequence Power Protection ProtFrq FrqPTOF1 PTOF_NO_SEG F> 1 Overfrequency FrqPTOF2 PTOF_NO_SEG F> 2 Overfrequency FrqPTRC10 PTRC_INDIVID_NO_SEG Protection trip for Frequency Protection FrqPTUF1 PTUF_NO_SEG F< 1 Underfrequency FrqPTUF2 PTUF_NO_SEG F< 2 Underfrequency FrqPTUF3 PTUF_NO_SEG F< 3 Underfrequency FrqPTUF4 PTUF_NO_SEG F< 4 Underfrequency LLN0 LLN0_STANDARD_WITH_CTRLMO Logical Device for Frequency Protection DProtNegSeq LLN0 Logical Device for Negative Sequence LLN0_STANDARD_WITH_CTRLMO Protection D NgcPTOC1 PTOC_NO_SEG I2> 1 Negative Sequence NgcPTOC2 PTOC_NO_SEG I2> 2 Negative Sequence NgcPTOC3 PTOC_NO_SEG I2> 3 Negative Sequence NgcPTOC4 PTOC_NO_SEG I2> 4 Negative Sequence NgcPTRC8 PTRC_INDIVID_NO_SEG Protection trip for Negative Sequence Protection ProtNvd LLN0 LLN0_STANDARD_WITH_CTRLMO Logical Device for Nvd Protection D VtpResPTOV1 PTOV_NEU VN> 1 Residual Overvoltage VtpResPTOV2 PTOV_NEU VN> 2 Residual Overvoltage VtpResPTRC9 PTRC_INDIVID_NO_SEG Protection trip for Nvd protection ProtOvCur LLN0 Logical Device for Overcurrent LLN0_STANDARD_WITH_CTRLMO Protection D OcpPTOC1 PTOC_SEG I> 1 Overcurrent OcpPTOC2 PTOC_SEG I> 2 Overcurrent OcpPTOC3 PTOC_SEG I> 3 Overcurrent OcpPTOC4 PTOC_SEG I> 4 Overcurrent OcpPTRC5 PTRC_INDIVID_SEG Protection trip for Overcurrent Protection ProtOvThm LLN0 Logical Device for Thermal Overload LLN0_STANDARD_WITH_CTRLMO Protection D OvThmPTRC12 PTRC_INDIVID_NO_SEG Protection Trip for OverThermal ThmPTTR1 PTTR_NO_SEG Thermal Overload ProtPsof LLN0 Logical Device for Switch onto Fault LLN0_STANDARD_WITH_CTRLMO Protection 8 P442&4/EN MC/Ha6

11 MiCOM P40 Agile P442, P444 MICS LD LN Instance LN Type Description D PsofPTRC4 PTRC_INDIVID_NO_SEG Protection trip for Switch onto Fault protection SofPSOF1 PSOF_BASIC Switch onto Fault protection TorPSOF1 PSOF_BASIC Trip on Reclose protection ProtPwrSwgBlk LLN0 LLN0_STANDARD_WITH_CTRLMO Logical Device for Power Swing D PsbRPSB1 RPSB_BASIC Zone 1/1X Ph/Gnd Power Swing Blocking PsbRPSB2 RPSB_BASIC Zone 2 Ph/Gnd Power Swing Blocking PsbRPSB3 RPSB_BASIC Zone 3 Ph/Gnd Power Swing Blocking PsbRPSB4 RPSB_BASIC Zone 4 Ph/Gnd Power Swing Blocking PsbRPSB5 RPSB_BASIC Zone P Ph/Gnd Power Swing Blocking PsbRPSB6 RPSB_BASIC Zone Q Ph/Gnd Power Swing Blocking ProtUcCur LLN0 Logical Device for Under Current LLN0_STANDARD_WITH_CTRLMO Protection D UcpPTRC16 PTRC_INDIVID_NO_SEG Protection trip for Under Current protection UcpPTUC1 PTUC_BASIC Undercurrent I<1 Protection UcpPTUC2 PTUC_BASIC Undercurrent I<2 Protection ProtUsr LLN0 LLN0_STANDARD Logical Device for User Trip Protection UsrPTRC15 PTRC_INDIVID_SEG Protection Trip for user ProtVtp LLN0 LLN0_STANDARD_WITH_CTRLMO Logical Device for Vtp Protection D VtpPhsPTOV1 PTOV_SEG V> 1 Overvoltage VtpPhsPTOV2 PTOV_SEG V> 2 Overvoltage VtpPhsPTOV3 PTOV_SEG V> 3 Overvoltage VtpPhsPTOV4 PTOV_SEG V> 4 Overvoltage VtpPhsPTRC13 PTRC_INDIVID_SEG Protection trip for Vtp Protection VtpPhsPTUV1 PTUV_SEG V< 1 Undervoltage VtpPhsPTUV2 PTUV_SEG V< 2 Undervoltage VtpPhsPTUV3 PTUV_SEG V< 3 Undervoltage VtpPhsPTUV4 PTUV_SEG V< 4 Undervoltage Records LLN0 LLN0_STANDARD Records Logical Device LPHD1 LPHD_STANDARD Physical Device Information PriRFLO1 RFLO_BASIC Fault Locator RDRE1 RDRE_BASIC Disturbance Recorder System AlmGGIO1 GGIO_ALM_96 Alarms FnkGGIO1 GGIO_IND_10 Function Keys GosGGIO1 GGIO_IND_64 GOOSE Input Signals 64 GosGGIO2 GGIO_IND_32 GOOSE Output Signals ITPC1 ITPC_SYSTEM Teleprotection Communication Interfaces for Channel 1 P442&4/EN MC/Ha6 9

12 MICS MiCOM P40 Agile P442, P444 LD LN Instance LN Type Description LedGGIO1 GGIO_IND_18 Red LED Signals LedGGIO2 GGIO_IND_18 Green LED Signals LGOS1 LGOS10 LGOS11 LGOS12 LGOS13 LGOS14 LGOS15 LGOS16 LGOS17 LGOS18 LGOS19 LGOS2 LGOS20 LGOS21 LGOS22 LGOS23 LGOS24 LGOS25 LGOS26 LGOS27 LGOS28 LGOS29 LGOS3 LGOS30 LGOS31 External Publisher 1 External Publisher 10 External Publisher 11 External Publisher 12 External Publisher 13 External Publisher 14 External Publisher 15 External Publisher 16 External Publisher 17 External Publisher 18 External Publisher 19 External Publisher 2 External Publisher 20 External Publisher 21 External Publisher 22 External Publisher 23 External Publisher 24 External Publisher 25 External Publisher 26 External Publisher 27 External Publisher 28 External Publisher 29 External Publisher 3 External Publisher 30 External Publisher P442&4/EN MC/Ha6

13 MiCOM P40 Agile P442, P444 MICS LD LN Instance LN Type Description LGOS32 LGOS33 LGOS34 LGOS35 LGOS36 LGOS37 LGOS38 LGOS39 LGOS4 LGOS40 LGOS41 LGOS42 LGOS43 LGOS44 LGOS45 LGOS46 LGOS47 LGOS48 LGOS49 LGOS5 LGOS50 LGOS51 LGOS52 LGOS53 LGOS54 LGOS55 External Publisher 32 External Publisher 33 External Publisher 34 External Publisher 35 External Publisher 36 External Publisher 37 External Publisher 38 External Publisher 39 External Publisher 4 External Publisher 40 External Publisher 41 External Publisher 42 External Publisher 43 External Publisher 44 External Publisher 45 External Publisher 46 External Publisher 47 External Publisher 48 External Publisher 49 External Publisher 5 External Publisher 50 External Publisher 51 External Publisher 52 External Publisher 53 External Publisher 54 External Publisher 55 P442&4/EN MC/Ha6 11

14 MICS MiCOM P40 Agile P442, P444 LD LN Instance LN Type Description LGOS56 External Publisher 56 LGOS57 External Publisher 57 LGOS58 External Publisher 58 LGOS59 External Publisher 59 LGOS6 External Publisher 6 LGOS60 External Publisher 60 LGOS61 External Publisher 61 LGOS62 External Publisher 62 LGOS63 External Publisher 63 LGOS64 External Publisher 64 LGOS7 External Publisher 7 LGOS8 External Publisher 8 LGOS9 External Publisher 9 LLN0 LLN0_SYSTEM System Logical Device LPHD1 LPHD_SYSTEM Physical Device Information for System Logical Device LSVS1 LSVS_SYSTEM Sampled Value Subscription For SV LN1 LSVS2 LSVS_SYSTEM Sampled Value Subscription For SV LN2 LSVS3 LSVS_SYSTEM Sampled Value Subscription For SV LN3 LSVS4 LSVS_SYSTEM Sampled Value Subscription For SV LN4 LSVS5 LSVS_SYSTEM Sampled Value Subscription For SV LN5 LSVS6 LSVS_SYSTEM Sampled Value Subscription For SV LN6 LSVS7 LSVS_SYSTEM Sampled Value Subscription For SV LN7 LSVS8 LSVS_SYSTEM Sampled Value Subscription For SV LN8 LSVS9 LSVS_SYSTEM Sampled Value Subscription For SV LN9 OptGGIO1 GGIO_IND_24 Opto Inputs OrdRunGGIO1 GGIO_IND_32 Uniqueness of control "Order Running" indications for Control operations PloGGIO1 GGIO_IND_32_CTRL Controllable Inputs RlyGGIO1 GGIO_IND_46 Output (46) Contacts max 12 P442&4/EN MC/Ha6

15 MiCOM P40 Agile P442, P444 MICS LD LN Instance LN Type Description TVTR1 TVTR_SYSTEM Voltage transformer monitor 1.4 Logical Node definitions The definition tables for each of the Logical Nodes in the top-level data model are presented in the following sub-sections. The following table presents a summary of the Logical Node templates used across the Logical Devices within the overall IEC product data model: LN Type (LN Description Name Space CILO_INTERLOCK (CILO) Control Interlocking CSWI_BASIC GGIO_ALM_96 GGIO_IND_10 GGIO_IND_18 GGIO_IND_24 GGIO_IND_32 GGIO_IND_32_CTRL GGIO_IND_46 GGIO_IND_64 (CSWI) Switch controller (GGIO) Generic Process I/O (w.r.t 96 Alarm Elements) (GGIO) Generic Process I/O (w.r.t 10 Indication Elements) (GGIO) Generic Process I/O (w.r.t 18 Indication Elements) (GGIO) Generic Process I/O (w.r.t 24 Indication Elements) (GGIO) Generic Process I/O (w.r.t 32 Indication Elements) (GGIO) Generic Process I/O (w.r.t 32 Indications Ctrl i/p) (GGIO) Generic Process I/O (w.r.t 46 Indication Elements) (GGIO) Generic Process I/O (w.r.t 64 Indications Ctrl i/p) ITPC_SYSTEM (ITPC) Teleprotection communication interfaces (LGOS) Monitoring of GOOSE messages LLN0_SYSTEM (LLN0) System Logical Node 0 LLN0_STANDARD_WITH (LLN0) Logical Node 0 _CTRLMODLLN0_STANDARD (LLN0) General Logical Node 0 LLN0_STANDARD_MEA (LLN0) Measurements Logical Node 0 LPHD_STANDARD LPHD_SYSTEM LSVS_SYSTEM MLFR_FAULT_RECORD MMXU_FOURIER (LPHD) Px40 Physical Device Information (LPHD) Px40 Physical Device Information (used for Logical Device System only) (LSVS) Sampled value subscription (MLFR) Measurements of Fault Record (MMXU) Standard Measurements (w.r.t Fourier Values) ALSTOM- SII:PCS-Px40 P442&4/EN MC/Ha6 13

16 MICS MiCOM P40 Agile P442, P444 MSQI_ALL MSTA_I_W_VAR LN Type (LN Description Name Space (MSQI) Sequence and imbalance (w.r.t Pos, Neq, Zero) (MSTA) Metering Statistics (w.r.t Current, Real + Reactive Power - Average + Max values) PDIS_BASIC (PDIS) Distance (w.r.t Mandatory Attributes only) PDOP_BASIC PSCH_EXTENSION PSCH_EXT2 PSOF_BASIC PTOC_NEU PTOC_NO_SEG PTOC_SEG PTOF_NO_SEG PTOV_NEU PTOV_SEG PTRC_INDIVID_SEG PTRC_GLOBAL PTRC_INDIVID_NO_SE GPTTR_NO_SEG PTUC_BASIC PTUF_NO_SEG PTUV_SEG RBRF_EXTTRIP RDRE_BASIC RFLO_BASIC RPSB_BASIC RREC_NO_SEG RSYN_DIFCLC_ENH (PDOP) OverPower (w.r.t Mandatory Attributes only) (PSCH) Protection scheme extensions for ed2 (PSCH) Protection scheme (PSOF) Switch-onto-Fault Protection (PTOC) Timed Overcurrent (w.r.t Neutral) (PTOC) Timed Overcurrent (w.r.t No Phase Segregation) (PTOC) Timed Overcurrent (w.r.t Phase Segregation) (PTOF) Overfrequency (w.r.t No Phase Segregation) (PTOV) Overvoltage (w.r.t Neutral) (PTOV) Overvoltage (w.r.t Phase Segregation) (PTRC) Protection trip conditioning (PTRC) Protection trip for global protection conditioning (PTRC) Protection trip for individual protection conditioning (PTTR) Thermal overload (w.r.t No Phase Segregation) (PTUC) UnderCurrent (w.r.t No Phase Segregation) (PTUF) Underfrequency (w.r.t No Phase Segregation) (PTUV) Undervoltage (w.r.t Phase Segregation) (RBRF) Breaker Failure (w.r.t External Tripping) (RDRE) Disturbance Recorder function (w.r.t Mandatory Attributes only) (RFLO) Fault Locator (w.r.t Mandatory Attributes only) (RPSB) Power swing detection/blocking (w.r.t Mandatory Attributes only) (RREC) Autoreclosing (w.r.t No Phase Segregation) (RSYN) Synchronism-check / Synchronising (w.r.t Calculated Differential Measurements) 4:2003 ALSTOM- SII:PCS-Px40 14 P442&4/EN MC/Ha6

17 MiCOM P40 Agile P442, P444 MICS TVTR_SYSTEM XCBR_BASIC_3P XCBR_BASIC LN Type (LN Description Name Space Logical Node: CILO_INTERLOCK LN Class: Control Interlocking CILO (TVTR) Voltage transformer (XCBR) Circuit Breaker (w.r.t Mandatory Attributes Only) (XCBR) Circuit Breaker (w.r.t Mandatory Attributes Only) Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USEnaOpn SPS_WD Enable OPEN Commands EnaCls SPS_WD Enable CLOSE Commands Logical Node: CSWI_BASIC LN Class: Switch controller CSWI Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USLoc SPS_WD Local control behaviour OpOpn ACT_NO_SEG Operation "open switch" T OpCls ACT_NO_SEG Operation "close switch" T OpCntRs INC_STD Resettable operation counter Pos DPC_CTRL Switch, general Logical Node: GGIO_ALM_96 LN Class: Generic Process I/O (w.r.t 96 Alarm Elements) GGIO Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USAlm1 SPS_D General single alarm Alm2 SPS_D General single alarm Alm3 SPS_D General single alarm Alm4 SPS_D General single alarm P442&4/EN MC/Ha6 15

18 MICS MiCOM P40 Agile P442, P444 Alm5 SPS_D General single alarm Alm6 SPS_D General single alarm Alm7 SPS_D General single alarm Alm8 SPS_D General single alarm Alm9 SPS_D General single alarm Alm10 SPS_D General single alarm Alm11 SPS_D General single alarm Alm12 SPS_D General single alarm Alm13 SPS_D General single alarm Alm14 SPS_D General single alarm Alm15 SPS_D General single alarm Alm16 SPS_D General single alarm Alm17 SPS_D General single alarm Alm18 SPS_D General single alarm Alm19 SPS_D General single alarm Alm20 SPS_D General single alarm Alm21 SPS_D General single alarm Alm22 SPS_D General single alarm Alm23 SPS_D General single alarm Alm24 SPS_D General single alarm Alm25 SPS_D General single alarm Alm26 SPS_D General single alarm Alm27 SPS_D General single alarm Alm28 SPS_D General single alarm Alm29 SPS_D General single alarm Alm30 SPS_D General single alarm Alm31 SPS_D General single alarm Alm32 SPS_D General single alarm Alm33 SPS_D General single alarm Alm34 SPS_D General single alarm Alm35 SPS_D General single alarm Alm36 SPS_D General single alarm Alm37 SPS_D General single alarm Alm38 SPS_D General single alarm Alm39 SPS_D General single alarm Alm40 SPS_D General single alarm Alm41 SPS_D General single alarm Alm42 SPS_D General single alarm Alm43 SPS_D General single alarm Alm44 SPS_D General single alarm Alm45 SPS_D General single alarm Alm46 SPS_D General single alarm Alm47 SPS_D General single alarm Alm48 SPS_D General single alarm 16 P442&4/EN MC/Ha6

19 MiCOM P40 Agile P442, P444 MICS Alm49 SPS_D General single alarm Alm50 SPS_D General single alarm Alm51 SPS_D General single alarm Alm52 SPS_D General single alarm Alm53 SPS_D General single alarm Alm54 SPS_D General single alarm Alm55 SPS_D General single alarm Alm56 SPS_D General single alarm Alm57 SPS_D General single alarm Alm58 SPS_D General single alarm Alm59 SPS_D General single alarm Alm60 SPS_D General single alarm Alm61 SPS_D General single alarm Alm62 SPS_D General single alarm Alm63 SPS_D General single alarm Alm64 SPS_D General single alarm Alm65 SPS_D General single alarm Alm66 SPS_D General single alarm Alm67 SPS_D General single alarm Alm68 SPS_D General single alarm Alm69 SPS_D General single alarm Alm70 SPS_D General single alarm Alm71 SPS_D General single alarm Alm72 SPS_D General single alarm Alm73 SPS_D General single alarm Alm74 SPS_D General single alarm Alm75 SPS_D General single alarm Alm76 SPS_D General single alarm Alm77 SPS_D General single alarm Alm78 SPS_D General single alarm Alm79 SPS_D General single alarm Alm80 SPS_D General single alarm Alm81 SPS_D General single alarm Alm82 SPS_D General single alarm Alm83 SPS_D General single alarm Alm84 SPS_D General single alarm Alm85 SPS_D General single alarm Alm86 SPS_D General single alarm Alm87 SPS_D General single alarm Alm88 SPS_D General single alarm Alm89 SPS_D General single alarm Alm90 SPS_D General single alarm Alm91 SPS_D General single alarm Alm92 SPS_D General single alarm P442&4/EN MC/Ha6 17

20 MICS MiCOM P40 Agile P442, P444 Alm93 SPS_D General single alarm Alm94 SPS_D General single alarm Alm95 SPS_D General single alarm Alm96 SPS_D General single alarm Logical Node: GGIO_IND_10 Generic Process I/O (w.r.t 10 Indication Elements) LN Class: GGIO Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USInd1 SPS_D General Indication Ind2 SPS_D General Indication Ind3 SPS_D General Indication Ind4 SPS_D General Indication Ind5 SPS_D General Indication Ind6 SPS_D General Indication Ind7 SPS_D General Indication Ind8 SPS_D General Indication Ind9 SPS_D General Indication Ind10 SPS_D General Indication Logical Node: GGIO_IND_18 Generic Process I/O (w.r.t 18 Indication Elements) LN Class: GGIO Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USInd1 SPS_D General Indication Ind2 SPS_D General Indication Ind3 SPS_D General Indication Ind4 SPS_D General Indication Ind5 SPS_D General Indication Ind6 SPS_D General Indication Ind7 SPS_D General Indication Ind8 SPS_D General Indication Ind9 SPS_D General Indication Ind10 SPS_D General Indication Ind11 SPS_D General Indication 18 P442&4/EN MC/Ha6

21 MiCOM P40 Agile P442, P444 MICS Ind12 SPS_D General Indication Ind13 SPS_D General Indication Ind14 SPS_D General Indication Ind15 SPS_D General Indication Ind16 SPS_D General Indication Ind17 SPS_D General Indication Ind18 SPS_D General Indication Logical Node: GGIO_IND_24 Generic Process I/O (w.r.t 24 Indication Elements) LN Class: GGIO Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USInd1 SPS_D General Indication Ind2 SPS_D General Indication Ind3 SPS_D General Indication Ind4 SPS_D General Indication Ind5 SPS_D General Indication Ind6 SPS_D General Indication Ind7 SPS_D General Indication Ind8 SPS_D General Indication Ind9 SPS_D General Indication Ind10 SPS_D General Indication Ind11 SPS_D General Indication Ind12 SPS_D General Indication Ind13 SPS_D General Indication Ind14 SPS_D General Indication Ind15 SPS_D General Indication Ind16 SPS_D General Indication Ind17 SPS_D General Indication Ind18 SPS_D General Indication Ind19 SPS_D General Indication Ind20 SPS_D General Indication Ind21 SPS_D General Indication Ind22 SPS_D General Indication Ind23 SPS_D General Indication Ind24 SPS_D General Indication P442&4/EN MC/Ha6 19

22 MICS MiCOM P40 Agile P442, P Logical Node: GGIO_IND_32 Generic Process I/O (w.r.t 32 Indication Elements) LN Class: GGIO Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USInd1 SPS_D General Indication Ind2 SPS_D General Indication Ind3 SPS_D General Indication Ind4 SPS_D General Indication Ind5 SPS_D General Indication Ind6 SPS_D General Indication Ind7 SPS_D General Indication Ind8 SPS_D General Indication Ind9 SPS_D General Indication Ind10 SPS_D General Indication Ind11 SPS_D General Indication Ind12 SPS_D General Indication Ind13 SPS_D General Indication Ind14 SPS_D General Indication Ind15 SPS_D General Indication Ind16 SPS_D General Indication Ind17 SPS_D General Indication Ind18 SPS_D General Indication Ind19 SPS_D General Indication Ind20 SPS_D General Indication Ind21 SPS_D General Indication Ind22 SPS_D General Indication Ind23 SPS_D General Indication Ind24 SPS_D General Indication Ind25 SPS_D General Indication Ind26 SPS_D General Indication Ind27 SPS_D General Indication Ind28 SPS_D General Indication Ind29 SPS_D General Indication Ind30 SPS_D General Indication Ind31 SPS_D General Indication Ind32 SPS_D General Indication 20 P442&4/EN MC/Ha6

23 MiCOM P40 Agile P442, P444 MICS Logical Node: GGIO_IND_32_CTRL Generic Process I/O (w.r.t 32 Indications Ctrl i/p) LN Class: GGIO Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USSPCSO1 SPC_CONTROL Single point controllable status output SPCSO2 SPC_CONTROL Single point controllable status output SPCSO3 SPC_CONTROL Single point controllable status output SPCSO4 SPC_CONTROL Single point controllable status output SPCSO5 SPC_CONTROL Single point controllable status output SPCSO6 SPC_CONTROL Single point controllable status output SPCSO7 SPC_CONTROL Single point controllable status output SPCSO8 SPC_CONTROL Single point controllable status output SPCSO9 SPC_CONTROL Single point controllable status output SPCSO10 SPC_CONTROL Single point controllable status output SPCSO11 SPC_CONTROL Single point controllable status output SPCSO12 SPC_CONTROL Single point controllable status output SPCSO13 SPC_CONTROL Single point controllable status output SPCSO14 SPC_CONTROL Single point controllable status output SPCSO15 SPC_CONTROL Single point controllable status output SPCSO16 SPC_CONTROL Single point controllable status output SPCSO17 SPC_CONTROL Single point controllable status output SPCSO18 SPC_CONTROL Single point controllable status output SPCSO19 SPC_CONTROL Single point controllable status output SPCSO20 SPC_CONTROL Single point controllable status output SPCSO21 SPC_CONTROL Single point controllable status output SPCSO22 SPC_CONTROL Single point controllable status output SPCSO23 SPC_CONTROL Single point controllable status output SPCSO24 SPC_CONTROL Single point controllable status output SPCSO25 SPC_CONTROL Single point controllable status output SPCSO26 SPC_CONTROL Single point controllable status output SPCSO27 SPC_CONTROL Single point controllable status output SPCSO28 SPC_CONTROL Single point controllable status output SPCSO29 SPC_CONTROL Single point controllable status output SPCSO30 SPC_CONTROL Single point controllable status output SPCSO31 SPC_CONTROL Single point controllable status output SPCSO32 SPC_CONTROL Single point controllable status output P442&4/EN MC/Ha6 21

24 MICS MiCOM P40 Agile P442, P Logical Node: GGIO_IND_46 Generic Process I/O (w.r.t 46 Indication Elements) LN Class: GGIO Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USInd1 SPS_D General indication (binary input) Ind2 SPS_D General indication (binary input) Ind3 SPS_D General indication (binary input) Ind4 SPS_D General indication (binary input) Ind5 SPS_D General indication (binary input) Ind6 SPS_D General indication (binary input) Ind7 SPS_D General indication (binary input) Ind8 SPS_D General indication (binary input) Ind9 SPS_D General indication (binary input) Ind10 SPS_D General indication (binary input) Ind11 SPS_D General indication (binary input) Ind12 SPS_D General indication (binary input) Ind13 SPS_D General indication (binary input) Ind14 SPS_D General indication (binary input) Ind15 SPS_D General indication (binary input) Ind16 SPS_D General indication (binary input) Ind17 SPS_D General indication (binary input) Ind18 SPS_D General indication (binary input) Ind19 SPS_D General indication (binary input) Ind20 SPS_D General indication (binary input) Ind21 SPS_D General indication (binary input) Ind22 SPS_D General indication (binary input) Ind23 SPS_D General indication (binary input) Ind24 SPS_D General indication (binary input) Ind25 SPS_D General indication (binary input) Ind26 SPS_D General indication (binary input) Ind27 SPS_D General indication (binary input) Ind28 SPS_D General indication (binary input) Ind29 SPS_D General indication (binary input) Ind30 SPS_D General indication (binary input) Ind31 SPS_D General indication (binary input) Ind32 SPS_D General indication (binary input) Ind33 SPS_D General indication (binary input) Ind34 SPS_D General indication (binary input) Ind35 SPS_D General indication (binary input) Ind36 SPS_D General indication (binary input) 22 P442&4/EN MC/Ha6

25 MiCOM P40 Agile P442, P444 MICS Ind37 SPS_D General indication (binary input) Ind38 SPS_D General indication (binary input) Ind39 SPS_D General indication (binary input) Ind40 SPS_D General indication (binary input) Ind41 SPS_D General indication (binary input) Ind42 SPS_D General indication (binary input) Ind43 SPS_D General indication (binary input) Ind44 SPS_D General indication (binary input) Ind45 SPS_D General indication (binary input) Ind46 SPS_D General indication (binary input) Logical Node: GGIO_IND_64 Generic Process I/O (w.r.t 64 Indications Ctrl i/p) LN Class: GGIO Mod ENC_MOD_THREE_STAT Mode USBeh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Ind1 SPS_D General Indication Ind2 SPS_D General Indication Ind3 SPS_D General Indication Ind4 SPS_D General Indication Ind5 SPS_D General Indication Ind6 SPS_D General Indication Ind7 SPS_D General Indication Ind8 SPS_D General Indication Ind9 SPS_D General Indication Ind10 SPS_D General Indication Ind11 SPS_D General Indication Ind12 SPS_D General Indication Ind13 SPS_D General Indication Ind14 SPS_D General Indication Ind15 SPS_D General Indication Ind16 SPS_D General Indication Ind17 SPS_D General Indication Ind18 SPS_D General Indication Ind19 SPS_D General Indication Ind20 SPS_D General Indication Ind21 SPS_D General Indication Ind22 SPS_D General Indication Ind23 SPS_D General Indication Ind24 SPS_D General Indication Ind25 SPS_D General Indication P442&4/EN MC/Ha6 23

26 MICS MiCOM P40 Agile P442, P444 Ind26 SPS_D General Indication Ind27 SPS_D General Indication Ind28 SPS_D General Indication Ind29 SPS_D General Indication Ind30 SPS_D General Indication Ind31 SPS_D General Indication Ind32 SPS_D General Indication Ind33 SPS_D General Indication Ind34 SPS_D General Indication Ind35 SPS_D General Indication Ind36 SPS_D General Indication Ind37 SPS_D General Indication Ind38 SPS_D General Indication Ind39 SPS_D General Indication Ind40 SPS_D General Indication Ind41 SPS_D General Indication Ind42 SPS_D General Indication Ind43 SPS_D General Indication Ind44 SPS_D General Indication Ind45 SPS_D General Indication Ind46 SPS_D General Indication Ind47 SPS_D General Indication Ind48 SPS_D General Indication Ind49 SPS_D General Indication Ind50 SPS_D General Indication Ind51 SPS_D General Indication Ind52 SPS_D General Indication Ind53 SPS_D General Indication Ind54 SPS_D General Indication Ind55 SPS_D General Indication Ind56 SPS_D General Indication Ind57 SPS_D General Indication Ind58 SPS_D General Indication Ind59 SPS_D General Indication Ind60 SPS_D General Indication Ind61 SPS_D General Indication Ind62 SPS_D General Indication Ind63 SPS_D General Indication Ind64 SPS_D General Indication 24 P442&4/EN MC/Ha6

27 MiCOM P40 Agile P442, P444 MICS Logical Node: ITPC_SYSTEM LN Class: Teleprotection communication interfaces ITPC Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod USEEName DPL_PRIV ENC_MOD_THREE_STAT Mode External equipment nameplate EEHealth ENS_HEALTH External equipment health LosSig SPS_WD Logical Node: LN Class: Monitoring of GOOSE messages LGOS Alarm si tuation: No signal received, indicates a channel problem Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Mod Health ENC_MOD_THREE_STAT Mode Status showing that really Sim messages are received and USSimSt SPS_WD accepted St SPS_WD Status of the subscription (True = active, False=not active) GoCBRef ORG_SRC_REF Reference to the subscribed GOOSE control block Logical Node: LLN0_STANDARD General Logical Node 0 LN Class: LLN0 NamPlt LPL_LLN0 Name Plate Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USGrRef ORG_SRC_REF Reference to a higher level logical device Logical Node: LLN0_STANDARD_MEA Measurements Logical Node 0 LN Class: LLN0 NamPlt LPL_LLN0_MEA Name Plate Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health P442&4/EN MC/Ha6 25

28 MICS MiCOM P40 Agile P442, P444 Mod ENC_MOD_THREE_STAT Mode USGrRef ORG_SRC_REF Reference to a higher level logical device Logical Node: LLN0_STANDARD_WITH_CTRLMOD Logical Node 0 LN Class: LLN0 NamPlt LPL_LLN0 Name Plate Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_CTRL_LD_MOD_2 Mode GrRef ORG_SRC_REF Reference to a higher level logical device Logical Node: LLN0_SYSTEM System Logical Node 0 LN Class: LLN0 NamPlt LPL_LLN0 Name Plate Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_CTRL_LD_MOD Mode LEDRs SPC_CONTROL LED reset T OrdRun SPS_WD_PRIV Indicate IED is operating a Control Object X SyncSt SPS_WD_PRIV Indicate time synchronisation in the IED is active/inactive X Logical Node: LPHD_STANDARD Px40 Physical Device Information LN Class: LPHD PhyNam DPL_STANDARD Physical device name plate PhyHealth ENS_HEALTH Physical device health Proxy SPS_D Indicates if this LN is a proxy PwrUp SPS_D Power up detected Logical Node: LPHD_SYSTEM Px40 Physical Device Information (used for Logical Device System only) LN Class: LPHD PhyNam DPL_STANDARD Physical device name plate PhyHealth ENS_HEALTH Physical device health Proxy SPS_D Indicates if this LN is a proxy PwrUp SPS_D Power up detected 26 P442&4/EN MC/Ha6

29 MiCOM P40 Agile P442, P444 MICS Sim SPC_CONTROL Receive simulated GOOSE or simulated SV Logical Node: LSVS_SYSTEM Sampled value subscription LN Class: LSVS Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USSt SPS_WD Status of the subscription (True = active, False = not active) SvCBRef ORG_SRC_REF Reference to the subscribed SV control block Logical Node: MLFR_FAULT_RECORD Measurements of Fault Record LN Class: MLFR NamPlt LPL_LN_PRIV Name Plate Beh ENS_BEH_THREE_STAT Behaviour US_DNHealth ENS_HEALTH_DN Health Mod ENC_MOD_THREE_STAT Mode US_DNAFlt WYE_SEG_D_PRIV Fault current X FltDur MV_FLOAT_PRIV Fault duration X PhVFlt WYE_SEG_D_PRIV Fault voltage X RlyTrTim MV_FLOAT_PRIV Relay trip time X Logical Node: MMXU_FOURIER Standard Measurements (w.r.t Fourier Values) LN Class: MMXU Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USTotW MV_FLOAT Total active power (Total P) TotVAr MV_FLOAT Total reactive power (Total Q) TotVA MV_FLOAT Total apparent power (Total S) TotPF MV_FLOAT Average power factor (Total PF) Hz MV_FLOAT Frequency PPV DEL_SEG_ANG Phase to Phase voltages PhV WYE_SEG_RES_D Phase to Ground voltages A WYE_SEG_RES_D Phase currents W WYE_SEG Phase active power (P) P442&4/EN MC/Ha6 27

30 MICS MiCOM P40 Agile P442, P444 VAr WYE_SEG Phase reactive power (Q) VA WYE_SEG Phase apparent power (S) PF WYE_SEG Phase power factor Logical Node: MSQI_ALL Sequence and imbalance (w.r.t Pos, Neq, Zero) LN Class: MSQI Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USSeqA SEQ_MAG_FLOAT Positive, Negative and Zero sequence current SeqV SEQ_MAG_FLOAT Positive, Negative and Zero sequence voltage ImbA WYE_RES_ANG_D Imbalance current Logical Node: MSTA_I_W_VAR Metering Statistics (w.r.t Current, Real + Reactive Power - Average + Max values) LN Class: MSTA NamPlt LPL_LN_PRIV Name Plate Beh ENS_BEH_THREE_STAT Behaviour US_DNHealth ENS_HEALTH_DN Health Mod ENC_MOD_THREE_STAT Mode US_DNAvW MV_FLOAT_DN Average real power MaxW MV_FLOAT_DN Maximum real power AvVAr MV_FLOAT_DN Average reactive power MaxVAr MV_FLOAT_DN Maximum reactive power EvStr SPC_CTRL_PRIV Start of evaluation interval Logical Node: PDIS_BASIC Distance (w.r.t Mandatory Attributes only) LN Class: PDIS Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_SEG_NEU Start Op ACT_SEG_NEU Operate T 28 P442&4/EN MC/Ha6

31 MiCOM P40 Agile P442, P444 MICS Logical Node: PDOP_BASIC LN Class: Overpower (w.r.t Mandatory Attributes only) PDOP Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_NO_SEG Start Op ACT_NO_SEG Operate T Logical Node: PSCH_EXT2 LN Class: Protection scheme PSCH Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod USTxPrm ENC_MOD_THREE_STAT Mode ACT_NO_SEG Permissive information to be transmitted to the other side (teleprotection permissive signal) TxBlk ACT_NO_SEG Blocking information to be transmitted to the other side (teleprotection blocking signal) T RxPrm1 ACT_NO_SEG Activation information RxPrm1 received from the other side(s), for logging purposes (teleprotection permissive signal received) RxBlk1 ACT_NO_SEG Activation information RxBlk1 received from the other side(s), for logging purposes (teleprotection blocking signal received) T Op ACT_SEG_NEU Operate T Logical Node: PSCH_EXTENSION LN Class: Protection scheme extensions for ed2 PSCH Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USTxPrm ACT_NO_SEG Permissive information to be transmitted to the other side (teleprotection permissive signal) T TxBlk ACT_NO_SEG Blocking information to be transmitted to the other side (teleprotection blocking signal) T RxPrm1 ACT_NO_SEG Activation information RxPrm1 received from the other side(s), for logging purposes (teleprotection permissive signal received) T RxBlk1 ACT_NO_SEG Activation information RxBlk1 received from the other side(s), for logging purposes (teleprotection blocking signal received) T Op ACT_SEG_NEU Operate T EchoWei SPS_WD TxPrm is being sent as echo signal or in case of weak end infeed T T T P442&4/EN MC/Ha6 29

32 MICS MiCOM P40 Agile P442, P444 EchoWeiOp SPS_WD Logical Node: PSOF_BASIC LN Class: Additional indica tion that Op is the operate from the weak end infeed or echo function (typically with undervoltage control) Switch-onto-Fault Protection PSOF NamPlt LPL_LN_PRIV Name Plate Beh ENS_BEH_FOUR_STATU Behaviour S_DNHealth ENS_HEALTH_DN Health Mod ENC_MOD_TWO_STATU Mode S_DNStr ACD_NO_SEG_DN Start Op ACT_NO_SEG_DN Operate T Logical Node: PTOC_NEU LN Class: Timed Overcurrent (w.r.t Neutral) PTOC Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_NEU Start Op ACT_NEU Operate T Logical Node: PTOC_NO_SEG LN Class: Timed Overcurrent (w.r.t No Phase Segregation) PTOC Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_NO_SEG Start Op ACT_NO_SEG Operate T Logical Node: PTOC_SEG LN Class: Timed Overcurrent (w.r.t Phase Segregation) PTOC Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health T 30 P442&4/EN MC/Ha6

33 MiCOM P40 Agile P442, P444 MICS Mod ENC_MOD_TWO_STATU Mode Str ACD_SEG Start Op ACT_SEG Operate T Logical Node: PTOF_NO_SEG Overfrequency (w.r.t No Phase Segregation) LN Class: PTOF Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_NO_SEG Start Op ACT_NO_SEG Operate T Logical Node: PTOV_NEU Overvoltage (w.r.t Neutral) LN Class: PTOV Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_NEU Start Op ACT_NEU Operate T Logical Node: PTOV_SEG Overvoltage (w.r.t Phase Segregation) LN Class: PTOV Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_SEG Start Op ACT_SEG Operate T Logical Node: PTRC_GLOBAL Protection trip for global protection conditioning LN Class: PTRC P442&4/EN MC/Ha6 31

34 MICS MiCOM P40 Agile P442, P444 Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USTr ACT_SEG Trip Op ACT_SEG_NEU Operate (combination of subscribed Op from protection functions) Str ACD_SEG_NEU Sum of all starts of all connected Logical Nodes Logical Node: PTRC_INDIVID_NO_SEG Protection trip for individual protection conditioning LN Class: PTRC Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USOp ACT_NO_SEG Operate (combination of subscribed Op from protection functions) Str ACD_NO_SEG Sum of all starts of all connected Logical Nodes Logical Node: PTRC_INDIVID_SEG Protection trip conditioning LN Class: PTRC Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USOp ACT_SEG_NEU Operate (combination of subscribed Op from protection functions) Str ACD_SEG_NEU Sum of all starts of all connected Logical Nodes Logical Node: PTTR_NO_SEG Thermal overload (w.r.t No Phase Segregation) LN Class: PTTR Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Op ACT_NO_SEG Operate T AlmThm SPS_WD Thermal alarm TmpRl MV_FLOAT Relation between temperature and maximum temperature 32 P442&4/EN MC/Ha6

35 MiCOM P40 Agile P442, P444 MICS MTRRs SPC_CTRL_PRIV Reset Thermal State X Logical Node: PTUC_BASIC Undercurrent (w.r.t No Phase Segregation) LN Class: PTUC Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_NO_SEG Start Op ACT_NO_SEG Operate T Logical Node: PTUF_NO_SEG Underfrequency (w.r.t No Phase Segregation) LN Class: PTUF Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_NO_SEG Start Op ACT_NO_SEG Operate T Logical Node: PTUV_SEG Undervoltage (w.r.t Phase Segregation) LN Class: PTUV Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_SEG Start Op ACT_SEG Operate T Logical Node: RBRF_EXTTRIP Breaker Failure (w.r.t External Tripping) LN Class: RBRF Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health P442&4/EN MC/Ha6 33

36 MICS MiCOM P40 Agile P442, P444 Mod ENC_MOD_TWO_STATU Mode OpEx ACT_NO_SEG Breaker failure trip ("External trip") T Logical Node: RDRE_BASIC Disturbance Recorder function (w.r.t Mandatory Attributes only) LN Class: RDRE Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USRcdMade SPS_WD Recording made FltNum INS_BASIC Fault number Logical Node: RFLO_BASIC Fault Locator (w.r.t Mandatory Attributes only) LN Class: RFLO Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USFltZ CMV_MAG_FLOAT Fault impedance FltDiskm MV_FLOAT Fault distance in km Logical Node: RPSB_BASIC Power swing detection/blocking (w.r.t Mandatory Attributes only) LN Class: RPSB Beh ENS_BEH_FOUR_STATUS Behaviour Health ENS_HEALTH Health Mod ENC_MOD_TWO_STATU Mode Str ACD_NO_SEG Start (Power Swing Detected) Op ACT_NO_SEG Operate (Out of step Tripping) T BlkZn SPS_WD Blocking of correlated PDIS zone Logical Node: RREC_NO_SEG Autoreclosing (w.r.t No Phase Segregation) LN Class: RREC 34 P442&4/EN MC/Ha6

37 MiCOM P40 Agile P442, P444 MICS Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USOpCls ACT_NO_SEG Operation "Close Switch" issued to close circuit breaker AutoRecSt ENS_AUTORECST Auto reclosing status Logical Node: RSYN_DIFCLC_ENH Synchronism-check / Synchronising (w.r.t Calculated Differential Measurements) LN Class: RSYN Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USRel SPS_WD Release DifVClc MV_FLOAT Calculated difference in voltage DifHzClc MV_FLOAT Calculated difference in frequency Logical Node: TVTR_SYSTEM Voltage transformer LN Class: TVTR Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USEEHealth ENS_HEALTH External equipment health EEName DPL_PRIV External equipment name plate FuFail SPS_WD TVTR fuse failure Logical Node: XCBR_BASIC Circuit Breaker (w.r.t Mandatory Attributes only) LN Class: XCBR Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USEEHealth ENS_HEALTH External equipment health Loc SPS_WD Local operation OpCnt INS_BASIC Operation counter CBOpCap ENS_CBCAP Circuit Breaker operating capability SumSwARs BCR_PRIV Sum of switched amperes, resetable P442&4/EN MC/Ha6 35

38 MICS MiCOM P40 Agile P442, P444 Pos DPC_STATUS Switch position BlkOpn SPC_STATUS Block opening BlkCls SPC_STATUS Block closing Logical Node: XCBR_BASIC_3P Circuit Breaker (w.r.t Mandatory Attributes only) LN Class: XCBR Beh ENS_BEH_THREE_STAT Behaviour USHealth ENS_HEALTH Health Mod ENC_MOD_THREE_STAT Mode USEEHealth ENS_HEALTH External equipment health Loc SPS_WD Local control behaviour OpCnt INS_BASIC Operation counter CBOpCap ENS_CBCAP Circuit Breaker operating capability Pos DPC_STATUS Switch position BlkOpn SPC_STATUS Block opening BlkCls SPC_STATUS Block closing 1.5 Common Data Class definitions The definition tables for each of the Common Data Classes used in the Logical Node definitions are presented in the following sub-sections. From an application point-of-view the data attributes of a Common Data Class are classified according to their specific use. The characterization of data attributes, and the services that they support/provide, will be through the use of 'Functional Constraints'. The Functional Constraints are specified by the table below: FC Name Semantic Source Definition BL Blocking IEC BR Buffered reports IEC CF Configuration IEC CO Control IEC DC Description IEC EX Extended Definition IEC GO GOOSE Control IEC GS GSSE Control (UCA2 GOOSE) IEC LG Logging IEC MS Multicast sampled value control IEC MX Measurands (Analogue values) IEC OR Operate received IEC RP Unbuffered reports IEC SE Setting Group Editable IEC SG Setting Group IEC SP Set Point IEC P442&4/EN MC/Ha6

39 MiCOM P40 Agile P442, P444 MICS FC Name Semantic Source Definition SR Service response IEC ST Status Information IEC SV Substitution Values IEC US Unicast sampled value control IEC XX Data attribute service parameters IEC Common Data Class: ACD_NEU Directional Protection Activation Information (w.r.t Neutral) ACD general BOOLEAN ST Trip or start has happened dirgeneral ST dir General direction (unknown, forward, backward or both) neut BOOLEAN ST Trip or start event with earth current has happened dirneut ST dir Earth current direction (unknown, forward or backward) q Quality ST Quality of the protection activation information t TimeStamp ST Common Data Class: ACD_NO_SEG Timestamp of the last change in state of protection activation information Directional Protection Activation Information (w.r.t No Phase Segregation) ACD general BOOLEAN ST Trip or start has happened dirgeneral ST dir General direction (unknown, forward, backward or both) q Quality ST Quality of the protection activation information t TimeStamp ST Common Data Class: ACD_NO_SEG_DN Timestamp of the last change in state of protection activation information Directional Protection Activation Information (w.r.t No Phase Segregation, with datans used for the standard DO in the extended LN) ACD general BOOLEAN ST Trip or start has happened dirgeneral ST dir General direction (unknown, forward, backward or both) q Quality ST Quality of the protection activation information t TimeStamp ST Timestamp of the last change in state of protection activation information P442&4/EN MC/Ha6 37

40 MICS MiCOM P40 Agile P442, P444 datans VISIBLE_STRING255 EX Data name space Common Data Class: ACD_SEG Directional Protection Activation Information (w.r.t Phase Segregation) ACD general BOOLEAN ST Trip or start has happened dirgeneral ST dir General direction (unknown, forward, backward or both) phsa BOOLEAN ST Trip or start event of Phase A has happened dirphsa ST dir Phase A direction (unknown, forward or backward) phsb BOOLEAN ST Trip or start event of Phase B has happened dirphsb ST dir Phase B direction (unknown, forward or backward) phsc BOOLEAN ST Trip or start event of Phase C has happened dirphsc ST dir Phase C direction (unknown, forward or backward) q Quality ST Quality of the protection activation information t TimeStamp ST Common Data Class: ACD_SEG_NEU Timestamp of the last change in state of protection activation information Directional Protection Activation Information (w.r.t Phase Segregation + Neutral) ACD general BOOLEAN ST Trip or start has happened dirgeneral ST dir General direction (unknown, forward, backward or both) phsa BOOLEAN ST Trip or start event of Phase A has happened dirphsa ST dir Phase A direction (unknown, forward or backward) phsb BOOLEAN ST Trip or start event of Phase B has happened dirphsb ST dir Phase B direction (unknown, forward or backward) phsc BOOLEAN ST Trip or start event of Phase C has happened dirphsc ST dir Phase C direction (unknown, forward or backward) neut BOOLEAN ST Trip or start event with earth current has happened dirneut ST dir Earth current direction (unknown, forward or backward) q Quality ST Quality of the protection activation information t TimeStamp ST Timestamp of the last change in state of protection activation information 38 P442&4/EN MC/Ha6

41 MiCOM P40 Agile P442, P444 MICS Common Data Class: ACT_NEU Protection Activation Information (w.r.t Neutral) ACT general BOOLEAN ST Trip or start has happened neut BOOLEAN ST Trip or start event with earth current has happened q Quality ST Quality of the protection activation information t TimeStamp ST Timestamp of the last change in state of protection activation information Common Data Class: ACT_NO_SEG Protection Activation Information (w.r.t No Phase Segregation) ACT general BOOLEAN ST Trip or start has happened q Quality ST Quality of the protection activation information t TimeStamp ST Timestamp of the last change in state of protection activation information Common Data Class: ACT_NO_SEG_DN Protection Activation Information (w.r.t No Phase Segregation, with datans used for the standard DO in the extended LN) ACT general BOOLEAN ST Trip or start has happened q Quality ST Quality of the protection activation information t TimeStamp ST datans VISIBLE_STRING255 EX Data name space Common Data Class: ACT_SEG Timestamp of the last change in state of protection activation information Protection Activation Information (w.r.t Phase Segregation) ACT general BOOLEAN ST Trip or start has happened phsa BOOLEAN ST Trip or start event of Phase A has happened phsb BOOLEAN ST Trip or start event of Phase B has happened phsc BOOLEAN ST Trip or start event of Phase C has happened q Quality ST Quality of the protection activation information t TimeStamp ST Timestamp of the last change in state of protection activation information P442&4/EN MC/Ha6 39

42 MICS MiCOM P40 Agile P442, P Common Data Class: ACT_SEG_NEU Protection Activation Information (w.r.t Phase Segregation + Neutral) ACT general BOOLEAN ST Trip or start has happened phsa BOOLEAN ST Trip or start event of Phase A has happened phsb BOOLEAN ST Trip or start event of Phase B has happened phsc BOOLEAN ST Trip or start event of Phase C has happened neut BOOLEAN ST Trip or start event with earth current has happened q Quality ST Quality of the protection activation information t TimeStamp ST Timestamp of the last change in state of protection activation information Common Data Class: BCR_PRIV Binary Counter Reading BCR actval INT64 ST Binary counter status represented as an integer q Quality ST Quality of counter value t TimeStamp ST Time of last counter change pulsqty FLOAT32 CF Magnitude of the counted value 'per count' (value = actval x pulsqty) Common Data Class: CMV_MAG_ANG_FLOAT Complex Measured value (w.r.t Floating Point Magnitude and Angle) CMV cval Vector_MagnitudeAngle_Float MX Deadbanded complex measured vector. Updated to the current value of instcval when the value has changed according to the configuration parameter db. q Quality MX Quality of the measurement value t TimeStamp MX Time deadbanded magnitude last exceeded its db configuration parameter units Unit_Multiplier CF Unit of the attribute representing the data db INT32U CF Measurement deadband rangec RangeConfig_DeadBand CF Measurement range configuration attributes Common Data Class: CMV_MAG_FLOAT Complex Measured value (w.r.t Floating Point Magnitude) CMV Deadbanded complex measured vector. Updated to the current value cval Vector_Magnitude_Float MX of instcval when the value has changed according to the configuration parameter db. q Quality MX Quality of the measurement value 40 P442&4/EN MC/Ha6

43 MiCOM P40 Agile P442, P444 MICS t TimeStamp MX Time deadbanded magnitude last exceeded its db configuration parameter units Unit_Multiplier CF Unit of the attribute representing the data db INT32U CF Measurement deadband rangec RangeConfig_DeadBand CF Measurement range configuration attributes Common Data Class: DEL_SEG_ANG Phase to phase measurements for a 3-Phase system (w.r.t Phase Segregation + Angle) DEL phsab CMV_MAG_ANG_FLOAT -- Measurement values for Phase A to Phase B phsbc CMV_MAG_ANG_FLOAT -- Measurement values for Phase B to Phase C phsca CMV_MAG_ANG_FLOAT -- Measurement values for Phase C to Phase A Common Data Class: DPC_CTRL Controllable Double Point (for CSWI.pos) DPC ctlval BOOLEAN C Control value (Off - FALSE, On - TRUE) Oorigin Originator ST Originator of the last change of the controllable data stval CODED_ENUM (MMS Type: _BSTR2) ST Dbpos Status value of the data (Intermediate state, Off, On or Badstate) q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) sbotimeout INT32U CF Select Before Operate timeout period (in milliseconds) Common Data Class: DPC_STATUS Controllable Double Point (w.r.t Status only) DPC stval CODED_ENUM (MMS Type: _BSTR2) ST Dbpos Status value of the data (Intermediate state, Off, On or Badstate) q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) P442&4/EN MC/Ha6 41

44 MICS MiCOM P40 Agile P442, P Common Data Class: DPL_PRIV Device name plate for 'teleprotection communications channel DPL vendor VISIBLE_STRING255 D Name of the vendor Common Data Class: DPL_STANDARD Standard Device Name Plate DPL vendor VISIBLE_STRING255 D Name of the vendor ChwRev VISIBLE_STRING255 D Hardware revision CswRev VISIBLE_STRING255 D Software revision CserNum VISIBLE_STRING255 D Serial Number Cmodel VISIBLE_STRING255 D Model Number Clocation VISIBLE_STRING255 D Physical location of device Common Data Class: ENC_CTRL_LD_MOD Controllable enumerated status ENC ctlval ENUMERATED32 C Mod_3 Control value Oorigin Originator ST Originator of the last change of the controllable data stval ENUMERATED32 ST Mod_3 Status value of the data q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) sbotimeout INT32U CF Select Before Operate timeout period (in milliseconds) d VISIBLE_STRING255 D Description of the status element Common Data Class: ENC_CTRL_LD_MOD_2 Controllable enumerated status (includes three status, used for child LD.LLN0) ENC ctlval ENUMERATED32 C Mod_2 Control value Oorigin Originator ST Originator of the last change of the controllable data stval ENUMERATED32 ST Mod_2 Status value of the data q Quality ST Quality of the status value 42 P442&4/EN MC/Ha6

45 MiCOM P40 Agile P442, P444 MICS t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) sbotimeout INT32U CF Select Before Operate timeout period (in milliseconds) d VISIBLE_STRING255 D Description of the status element Common Data Class: ENC_MOD_THREE_STATUS Controllable enumerated mode status (with 3 status) ENC stval ENUMERATED32 ST Mod_3 Status value of the data q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) Common Data Class: ENC_MOD_THREE_STATUS_DN Controllable enumerated status (with 3 status and datans used for the Mod in the extended LN) ENC stval ENUMERATED32 ST Beh_3 Status value of the data q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) datans VISIBLE_STRING255 EX Data name space Common Data Class: ENC_MOD_TWO_STATUS Controllable enumerated mode status (with 2 status) ENC stval ENUMERATED32 ST Mod_2 Status value of the mode used for LN which have two status q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) P442&4/EN MC/Ha6 43

46 MICS MiCOM P40 Agile P442, P Common Data Class: ENC_MOD_TWO_STATUS_DN ENC Controllable enumerated status (with 2 status and datans used for the Mod in the extended LN) stval ENUMERATED32 ST Mod_2 Status value of the data q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) datans VISIBLE_STRING255 EX Data name space Common Data Class: ENS_AUTORECST stval Enumerated status ENS ST AutoRecSt The element status q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state Common Data Class: ENS_BEH_FOUR_STATUS stval Enumerated behaviour status (with 4 status) ENS ST Beh_4 The element status q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state Common Data Class: ENS_BEH_FOUR_STATUS_DN Enumerated status (with 4 status and datans used for the Beh in the extended LN) ENS stval ST Beh_4 The element status q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state datans VISIBLE_STRING255 EX Data name space 44 P442&4/EN MC/Ha6

47 MiCOM P40 Agile P442, P444 MICS Common Data Class: ENS_BEH_THREE_STATUS stval Enumerated behaviour status (with 3 status) ENS ST Beh_3 The element status q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state Common Data Class: ENS_BEH_THREE_STATUS_DN Enumerated status (with 3 status and datans used for the Beh in the extended LN) ENS stval ST Beh_3 The element status q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state datans VISIBLE_STRING255 EX Data name space Common Data Class: ENS_CBCAP stval Enumerated status (w.r.t CB operating capability) ENS ST CBOpCap The element status q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state Common Data Class: ENS_HEALTH stval Enumerated status ENS ST Health The element status q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state Common Data Class: ENS_HEALTH_DN Enumerated status (with datans used for the Health in the extended LN) ENS stval ST Health The element status P442&4/EN MC/Ha6 45

48 MICS MiCOM P40 Agile P442, P444 q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state datans VISIBLE_STRING255 EX Data name space Common Data Class: INC_STD Standard Controllable Integer Status (w.r.t Mode) INC stval INT32 ST Status value of the data q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel Common Data Class: INS_BASIC CF ctlmodel Control model (Corresponding to the behaviour of the data) Integer Status (w.r.t Mandatory Options only) INS stval INT32 ST The element status q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state Common Data Class: LPL_LLN0 Logical Node 0 Name Plate LPL vendor VISIBLE_STRING255 D Name of the vendor CswRev VISIBLE_STRING255 D Software revision Cd VISIBLE_STRING255 D Description CconfigRev VISIBLE_STRING255 D Uniquely identifies the configuration of a local device instance CldNs VISIBLE_STRING255 EX Logical Device name space Common Data Class: LPL_LLN0_MEA Measurements Logical Node 0 name plate LPL vendor VISIBLE_STRING255 D Name of the vendor CswRev VISIBLE_STRING255 D Software revision CconfigRev VISIBLE_STRING255 D Uniquely identifies the configuration of a local device instance CldNs VISIBLE_STRING255 EX Logical Device name space 46 P442&4/EN MC/Ha6

49 MiCOM P40 Agile P442, P444 MICS Common Data Class: LPL_LN Standard Logical Node Name Plate LPL vendor VISIBLE_STRING255 D Name of the vendor CswRev VISIBLE_STRING255 D Software revision Cd VISIBLE_STRING255 D Description Common Data Class: LPL_LN_PRIV Logical Node Name Plate (w.r.t Alstom Extended) LPL vendor VISIBLE_STRING255 D Name of the vendor CswRev VISIBLE_STRING255 D Software revision Cd VISIBLE_STRING255 D Description ClnNs VISIBLE_STRING255 EX Logical Node name space datans VISIBLE_STRING255 EX Data name space Common Data Class: MV_FLOAT Measured value (w.r.t Floating Point value) MV mag AnalogueValue_Float MX Deadbanded magnitude of the instantaneous value of a measured value or harmonic value. Updated to the current value of instmag when the value has changed according to the configuration parameter db. q Quality MX Quality of the measurement value t TimeStamp MX Time deadbanded magnitude last exceeded its db configuration parameter units Unit_Multiplier CF Unit of the attribute representing the data db INT32U CF Measurement deadband rangec RangeConfig_DeadBand CF Measurement range configuration attributes Common Data Class: MV_FLOAT_DN Measured value (w.r.t Floating Point Value with DataNs used for the standard DO in the extended LN) MV mag AnalogueValue_Float MX Deadbanded magnitude of the instantaneous value of a measured value or harmonic value. Updated to the current value of instmag when the value has changed according to the configuration parameter db. q Quality MX Quality of the measurement value t TimeStamp MX Time deadbanded magnitude last exceeded its db configuration parameter P442&4/EN MC/Ha6 47

50 MICS MiCOM P40 Agile P442, P444 units Unit_Multiplier CF Unit of the attribute representing the data db INT32U CF Measurement deadband rangec RangeConfig_DeadBand CF Measurement range configuration attributes datans VISIBLE_STRING255 EX Data name space Common Data Class: MV_FLOAT_PRIV Measured value (used for extended DO) MV mag AnalogueValue_Float MX Deadbanded magnitude of the instantaneous value of a measured value or harmonic value. Updated to the current value of instmag when the value has changed according to the configuration parameter db. q Quality MX Quality of the measurement value t TimeStamp MX Time deadbanded magnitude last exceeded its db configuration parameter units Unit_Multiplier CF Unit of the attribute representing the data db INT32U CF Measurement deadband rangec RangeConfig_DeadBand CF Measurement range configuration attributes datans VISIBLE_STRING255 EX Data name space Common Data Class: ORG_SRC_REF Object reference settings (only include setsrcref) ORG setsrcref ObjectReference SP The value of the object ref erence setting Common Data Class: SEQ_MAG_FLOAT Sequence components of a measurement value SEQ c1 CMV_MAG_FLOAT -- Sequence component 1 (For semantic meaning see seqt) c2 CMV_MAG_FLOAT -- Sequence component 2 (For semantic meaning see seqt) c3 CMV_MAG_FLOAT -- Sequence component 3 (For semantic meaning see seqt) seqt MX seqt Common Data Class: SPC_CONTROL Controllable Single Point SPC Sequence quantity measurement type (Pos-Neg-Zero or Dir-Quad- Zero) ctlval BOOLEAN C Control value (Off - FALSE, On - TRUE) Oorigin Originator ST Originator of the last change of the controllable data stval BOOLEAN ST Status value of the data 48 P442&4/EN MC/Ha6

51 MiCOM P40 Agile P442, P444 MICS q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) sbotimeout INT32U CF Select Before Operate timeout period (in milliseconds) Common Data Class: SPC_CTRL_PRIV Controllable Single Point (With Namespace) SPC ctlval BOOLEAN C Control value (Off - FALSE, On - TRUE) Oorigin Originator ST Originator of the last change of the controllable data stval BOOLEAN ST Status value of the data q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel CF ctlmodel Control model (Corresponding to the behaviour of the data) sbotimeout INT32U CF Select Before Operate timeout period (in milliseconds) datans VISIBLE_STRING255 EX Data name space Common Data Class: SPC_STATUS Controllable Single Point (w.r.t Status only) SPC stval BOOLEAN ST Status value of the data q Quality ST Quality of the status value t TimeStamp ST Timestamp of the last change in state of status value ctlmodel Common Data Class: SPS_D CF ctlmodel Control model (Corresponding to the behaviour of the data) Standard Single Point Status (with Description) SPS stval BOOLEAN ST The element status (TRUE or FALSE) q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state d VISIBLE_STRING255 D Description of the status element P442&4/EN MC/Ha6 49

52 MICS MiCOM P40 Agile P442, P Common Data Class: SPS_WD Single Point Status (without Description) SPS stval BOOLEAN ST The element status (TRUE or FALSE) q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state Common Data Class: SPS_WD_PRIV Single Point Status (without Description with Name Space) SPS stval BOOLEAN ST The element status (TRUE or FALSE) q Quality ST The quality of the status value t TimeStamp ST Timestamp of the last change in state datans VISIBLE_STRING255 EX Data name space Common Data Class: WYE_RES_ANG_D Phase to ground measurements for a 3-Phase system (w.r.t Residual + Description + Angle) WYE res CMV_MAG_ANG_FLOAT -- Measurement values for the residual system current d VISIBLE_STRING255 D Description of the status element Common Data Class: WYE_SEG Phase to ground measurements for a 3-Phase system (w.r.t Phase Segregation) WYE phsa CMV_MAG_FLOAT -- Measurement values for Phase A phsb CMV_MAG_FLOAT -- Measurement values for Phase B phsc CMV_MAG_FLOAT -- Measurement values for Phase C Common Data Class: WYE_SEG_D_PRIV Phase to ground measurements for a 3-Phase system (w.r.t Phase Segregation + Description, use for private data) WYE phsa CMV_MAG_FLOAT -- Measurement values for Phase A phsb CMV_MAG_FLOAT -- Measurement values for Phase B phsc CMV_MAG_FLOAT -- Measurement values for Phase C d VISIBLE_STRING255 D Description of the status element 50 P442&4/EN MC/Ha6

53 MiCOM P40 Agile P442, P444 MICS CdataNs VISIBLE_STRING255 EX Data name space Common Data Class: WYE_SEG_RES_D Phase to ground measurements for a 3-Phase system (w.r.t Phase Segregation + Residual + Description) WYE phsa CMV_MAG_ANG_FLOAT -- Measurement values for Phase A phsb CMV_MAG_ANG_FLOAT -- Measurement values for Phase B phsc CMV_MAG_ANG_FLOAT -- Measurement values for Phase C neut CMV_MAG_ANG_FLOAT -- Measurement values for neutral input d VISIBLE_STRING255 D Description of the status element 1.6 Common data attribute type definitions Common data attribute types, known herein as components, are defined for use in the Common Data Classes defined in the sections above Component: AnalogueValue_Float Comment: Parent Type: General analogue value (w.r.t Floating Point value) AnalogueValue Attribute Type Enumeration Comment X f FLOAT32 Floating point value Component: Originator Comment: Parent Type: Originator of the last change of data attribute representing the value of a controllable data object Attribute Type Enumeration Comment X orident OCTET_STRING64 Originator identification (Null value indicates unknown or not reported) orcat orcategory Component: RangeConfig_DeadBand Comment: Parent Type: Measurement range configuration RangeConfig Originator category (Not-supported, bay-control, station-control, remote-control, automatic-bay, automatic-station, automatic-remote, maintenance or process) Attribute Type Enumeration Comment X min AnalogueValue_Float Minimum process measurement for which values of i and f are considered within limits max AnalogueValue_Float Maximum process measurement for which values of i and f are considered within limits lllim AnalogueValue_Float Low Low range limit llim AnalogueValue_Float Low range limit hlim AnalogueValue_Float High range limit P442&4/EN MC/Ha6 51

54 MICS MiCOM P40 Agile P442, P444 Attribute Type Enumeration Comment X hhlim AnalogueValue_Float High High range limit Component: Unit_Multiplier Comment: Parent Type: SI Unit definitions Unit Attribute Type Enumeration Comment X SIUnit multiplier SIUnit Component: Vector_Magnitude_Float Comment: Parent Type: SI Unit multiplier Multiplier value, the default of which is 0 (i.e. multiplier = 1) Complex vector (w.r.t Floating Point Magnitude value) Vector Attribute Type Enumeration Comment X mag AnalogueValue_Float The magnitude of the complex value Component: Vector_MagnitudeAngle_Float Comment: Parent Type: Complex vector (w.r.t Floating Point Magnitude and Angle values) Vector Attribute Type Enumeration Comment X mag AnalogueValue_Float The magnitude of the complex value ang AnalogueValue_Float The angle of the complex value (the unit is degrees) 1.7 Enumerated type definitions The following sub-sections specify the enumerations that are associated to some Common Data Class attributes. The definition of the enumerations are according to 3 and 4 unless otherwise stated Enumerated type: AddCause AddCause Ordinal 0 Unknown 1 Not-supported 2 Blocked-by-switching-hierarchy 3 Select-failed 4 Invalid-position 5 Position-reached 6 Parameter-change-in-execution 7 Step-limit 8 Blocked-by-Mode 9 Blocked-by-process 10 Blocked-by-interlocking 11 Blocked-by-synchrocheck Semantic 52 P442&4/EN MC/Ha6

55 MiCOM P40 Agile P442, P444 MICS Ordinal 12 Command-already-in-execution 13 Blocked-by-health 14 1-of-n-control 15 Abortion-by-cancel 16 Time-limit-over 17 Abortion-by-trip 18 Object-not-selected 19 Object-already-selected 20 No-access-authority 21 Ended-with-overshoot 22 Abortion-due-to-deviation 23 Abortion-by-communication-loss 24 Blocked-by-command 25 None 26 Inconsistent-parameters 27 Locked-by-other-client Semantic Enumerated type: AutoRecSt Auto-Reclose Status Ordinal 1 Ready 2 InProgress 3 Successful 4 WaitingForTrip 5 TripFromProtection 6 FaultDisappeared 7 WaitToComplete 8 CBclosed 9 CycleUnsuccessful 10 Unsuccessful 11 Aborted Semantic Enumerated type: Beh_3 Behaviour including 3 states Ordinal 1 on 3 test 4 test/blocked Semantic Enumerated type: Beh_4 Behaviour including 4 states Ordinal 1 on Semantic P442&4/EN MC/Ha6 53

56 MICS MiCOM P40 Agile P442, P444 Ordinal 3 test 4 test/blocked 5 off Semantic Enumerated type: CBOpCap CB Operating Capability Ordinal 1 None 2 Open 3 Close-Open 4 Open-Close-Open 5 Close-Open-Close-Open 6 Open-Close-Open-Close-Open 7 more Semantic Enumerated type: ctlmodel Control Model Ordinal 0 status-only 1 direct-with-normal-security 2 sbo-with-normal-security 3 direct-with-enhanced-security 4 sbo-with-enhanced-security Semantic Enumerated type: Dbpos Switch positions Ordinal 0 intermediate 1 off 2 on 3 bad Semantic Enumerated type: dir Direction Ordinal 0 unknown 1 forward 2 backward 3 both Semantic 54 P442&4/EN MC/Ha6

57 MiCOM P40 Agile P442, P444 MICS Enumerated type: Health Health Ordinal 1 Ok 2 Warning 3 Alarm Semantic Enumerated type: Mod_2 Mode including 2 states Ordinal 1 on 5 off Semantic Enumerated type: Mod_3 Mode including 3 states Ordinal 1 on 3 test 4 test/blocked Semantic Enumerated type: multiplier Exponents of the multiplier value in base 10. Ordinal -24 y -21 z -18 a -15 f -12 p -9 n -6 µ -3 m -2 c -1 d 0 1 da 2 h 3 k 6 M 9 G 12 T 15 P 18 E 21 Z Semantic P442&4/EN MC/Ha6 55

58 MICS MiCOM P40 Agile P442, P444 Ordinal 24 Y Semantic Enumerated type: orcategory orcategory Ordinal 0 not-supported 1 bay-control 2 station-control 3 remote-control 4 automatic-bay 5 automatic-station 6 automatic-remote 7 maintenance 8 process Semantic Enumerated type: seqt Sequence Measurement Type Ordinal 0 pos-neg-zero 1 dir-quad-zero Semantic Enumerated type: SIUnit SI Units derived from ISO/IEC 1000 Ordinal -13 weeks -12 months -11 years -10 days -9 F -8 ratio -7 miles -6 inches -5 feet -4 df/dt -3 hz/s -2 % -1 pu 1 2 m 3 kg 4 s 5 A 6 K Semantic 56 P442&4/EN MC/Ha6

59 MiCOM P40 Agile P442, P444 MICS Ordinal 7 mol 8 cd 9 deg 10 rad 11 sr 21 Gy 22 Bq 23 C 24 Sv 25 F 26 C 27 S 28 H 29 V 30 ohm 31 J 32 N 33 Hz 34 lx 35 Lm 36 Wb 37 T 38 W 39 Pa 41 m² 42 m³ 43 m/s 44 m/s² 45 m³/s 46 m/m³ 47 M 48 kg/m³ 49 m²/s 50 W/m K 51 J/K 52 ppm 53 1/s 54 rad/s 55 W/m² 56 J/m² 57 S/m 58 K/s 59 Pa/s 60 J/kg K Semantic P442&4/EN MC/Ha6 57

60 MICS MiCOM P40 Agile P442, P444 Ordinal 61 VA 62 Watts 63 VAr 64 phi 65 cos(phi) 66 Vs 67 V² 68 As 69 A² 70 A²t 71 VAh 72 Wh 73 VArh 74 V/Hz 75 Hz/s 76 char 77 char/s 78 kgm² 79 db 80 J/Wh 81 W/s 82 l/s 83 dbm 84 h 85 min Semantic 1.8 MMS data-type conversions The following table shows the relationships between the Part 7 and Part 8-1 data types. The definitions presented above use Part 7 data types, however these are subject to 'translation' when exposed over an MMS (Part 8-1) interface: Part 7 Type MMS Type Part 7 Description BOOLEAN Bool Logical TRUE/FALSE value BSTR16 Bstring16 Bit-string -16 bits BVstring13 BVstring13 Variable bit string (upto 13 bits) Check BVstring2 Control Object check flags CODED_ENUM Byte Coded enumeration CODED_ENUM2 Byte Coded enumeration (2) EntryTime Btime6 8.1 Section ENUMERATED16 Short 16 bit enumerated value ENUMERATED32 Long 32 bit enumerated value Byte 8 bit enumerated value FLOAT32 Float 32 bit floating point value FLOAT64 Double 64 bit floating point value INT128 Int bit signed integer value 58 P442&4/EN MC/Ha6

61 MiCOM P40 Agile P442, P444 MICS Part 7 Type MMS Type Part 7 Description INT16 Short 16 bit signed integer value INT16U Ushort 16 bit unsigned integer value INT24U Ulong 24 bit unsigned integer value INT32 Long 32 bit signed integer value INT32U Ulong 32 bit unsigned integer value INT64 Int64 64 bit signed integer value INT8 Byte 8 bit signed integer value INT8U Ubyte 8 bit unsigned integer value ObjectReference Vstring129 Object Reference(129 character string) OCTET_STRING6 Ostring6 6 character string (8 bits per character) OCTET_STRING64 OVstring64 64 character string (8 bits per character) OCTET_STRING8 OVstring8 8 character string (8 bits per character) Quality BVstring13 IEC61850 Quality TimeStamp Utctime IEC61850 Time stamp UNICODE_STRING255 UTF8Vstring character string (16 bits per unicode character) UTC_TM Utctime UTC Timestamp VISIBLE_STRING129 Vstring character string VISIBLE_STRING255 Vstring character string VISIBLE_STRING64 Vstring64 64 character string VISIBLE_STRING65 Vstring65 65 character string VISIBLE_STRING97 Vstring97 97 character string P442&4/EN MC/Ha6 59

62 MICS MiCOM P40 Agile P442, P P442&4/EN MC/Ha6

63 Alstom Grid - ALSTOM All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited. Alstom Grid Worldwide Contact Centre Tel: +44 (0)