Technical Information Telecontrol Model Implementation Conformance Statement (MICS) according to IEC Version 1.0.0

Transcription

1 Telecontrol Model Implementation Conformance Statement (MICS) according to IEC 61850

2 Telecontrol 2018 WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D Minden Phone: +49 (0) 571/ Fax: +49 (0) 571/ Web: info@wago.com Technical Support Phone: +49 (0) 571/ Fax: +49 (0) 571/ support@wago.com Every conceivable measure has been taken to ensure the accuracy and completeness of this documentation. However, as errors can never be fully excluded, we always appreciate any information or suggestions for improving the documentation. documentation@wago.com We wish to point out that the software and hardware terms as well as the trademarks of companies used and/or mentioned in the present manual are generally protected by trademark or patent. WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbh.

3 Telecontrol Table of Contents 3 Table of Contents 1 Model Implementation Conformance Statement (MICS) Logical Nodes List... 6 List of Tables... 9

4 4 Model Implementation Conformance Statement (MICS) Telecontrol Table 1: Model Implementation Conformance Statement (MICS) according to IEC Document Version Software Version according to IEC Library Server: Client: Date Name Change Paulick Initial version

5 Telecontrol Model Implementation Conformance Statement (MICS) 5 1 Model Implementation Conformance Statement (MICS) This model implementation conformance statement is applicable for the WAGO IEC interface in the / with firmware version This MICS document specifies the modelling extensions compared to IEC edition 2: Clause 2 contains the list of implemented logical nodes. Clause 3 describes the new and extended logical nodes. Clause 4 describes the new and extended enum types.

6 6 Model Implementation Conformance Statement (MICS) Telecontrol 1.1 Logical Nodes List The following table contains the list of logical nodes implemented in the WAGO IEC Solution: Table 2: Logical Nodes List Name Description A ANCR ARCO ATCC AVCO C CALH CCGR CILO CPOW CSWI G GAPC GGIO GSAL I IARC IHMI ITCI ITMI L LLNO LPHD M MDIF MHAI MHAN MMTR MMXN MMXU MSQI MSTA P PBDF PDCO PDEF PDIF PDIR PDIS PDOC PDOP PDPR PDOV PDUP PFRC Automatic Control Functions Control Neutral Current Regulator Reactive Power Control Automatic Tap Changer Controller Voltage Control Alarm Handling Cooling Group Control Interlocking Point on Wave Switching Switch Controller Generic Functions Generic Automatic Process Control Generic Process I/O Generic Security Application Interfacing and Archiving Functions System Archiving Human Machine Interface Telecontrol Interface Telemonitoring Interface Logical Node Zero Physical Device Information Metering and Measurement Differential Measurements Harmonics or Interharmonics Non-Phase Related Harmonics or Interharmonics Metering Non-Phase Related Measurement Measurement Sequence and Imbalance Metering Statistics Protection Busbar Protection DC Time Overcurrent Protection Directional Earth Fault Protection Differential Directional Distance AC Directional Overcurrent Protection Directional Over Power Directional Power/Reverse Power Protection DC Overvoltage Protection Directional Under Power Rate of Change of Frequency

7 Telecontrol Model Implementation Conformance Statement (MICS) 7 Table 2: Logical Nodes List Name Description PHAR PHIZ PIOC PLDF PMRI PMSS PNDF POPF PPAM PSCH PSDE PTEF PTDF PTOC PTOF PTOV PTRC PTTR PTUC PTUV PUPF PTUF PVOC PVPH PZSU R RDRE RADR RBDR RDRS RBRF RDIR RFLO RPSB RREC RSYN S SARC SIMG SIML SPDC T TCTR TVTR W WALM WALG WAPC WCNV WGEN Harmonic Restraint Ground Detector Instantaneous Overcurrent Differential Line Protection Motor Restart Inhibition Motor Starting Time Supervision Restricted Earth Fault Protection Over Power Factor Phase Angle Measuring Protection Scheme Sensitive Directional Earth Fault Transient Earth Fault Restricted earth fault protection Time Over Current Over Frequency Overvoltage Protection Trip Conditioning Thermal Overload Under Current Under Voltage Under Power Factor Under Frequency Voltage Controlled Time Over Current Volts per Hz Zero Speed or Under Speed Protection Related Functions Disturbance Recorder Function Disturbance Recorder Channel Analogue Disturbance Recorder Channel Binary Disturbance Record Handling Breaker Failure Directional Element Fault Locator Power Swing Detection/Blocking Auto Reclosing Synchronism Check or Synchronizing Sensors and Monitoring Monitoring and Diagnostics for Arcs Insulation Medium Supervision (Gas) Insulation Medium Supervision (Liquid) Monitoring and Diagnostics for Partial Discharges Instrument Transformers Current Transformer Voltage Transformer Wind Turbines Wind Power Plant Alarm Information Wind Turbine Analogue Log Information Wind Power Plant Active Power Control Information Wind Turbine Converter Information Wind Turbine Generator Information

8 8 Model Implementation Conformance Statement (MICS) Telecontrol Table 2: Logical Nodes List Name Description WMET WNAC WREP WROT WRPC WSLG WTOW WTRF WTRM WTUR WYAW X XCBR XSWI Y YEFN YLTC YPSH YPTR Z ZAXN ZBAT ZBSN ZCAB ZCAP ZCON ZGEN ZGIL ZLIN ZMOT ZREA ZRRC ZSAR ZTCF ZTCR Wind Power Plant Meteorological Information Wind Turbine Nacelle Information Wind Turbine Report Information Wind Turbine Rotor Information Wind Power Plant Reactive Power Control Information Wind Turbine State Log Information Wind Turbine Tower Information Wind Turbine Transformer Information Wind Turbine Transmission Information Wind Turbine General Information Wind Turbine Yawing Information Switchgear Functions Circuit Breaker Circuit Switch Power Transformers Earth Fault Neutralizer Tap Changer Power Shunt Power Transformer Further Power Systems Equipment Auxilliary Network Battery Bushing Power Cable Capacitor Bank Converter Generator Gas Insulated Line Power Overhead Line Motor Reactor Rotating Reactive Component Surge Arrestor Thyristor Controlled Frequency Converter Thyristor Controlled Reactive Converter

9 Telecontrol List of Tables 9 List of Tables Table 1: Model Implementation Conformance Statement (MICS) according to IEC Table 2: Logical Nodes List... 6

10 WAGO Kontakttechnik GmbH & Co. KG Postfach Minden Hansastraße Minden Phone: 0571/887 0 Fax: 0571/ info@wago.com Internet: