Creating Rules in Process Composer and using them in Process
|
|
- Derek Nash
- 6 years ago
- Views:
Transcription
1 Creating Rules in Process Composer and using them in Process Applies to: SAP NetWeaver Composition Environment 7.1 EHP-1 Version. For more information, visit the Composition homepage. Summary This article deals with creating user defined rules set from process composer itself and then using them in the process. This also briefs up on creating decision table in rules set. The article expects the user to have undergone the tutorial End-To-End process implementation sample. Author: Srinivasan Subbiah Company: HCL Technologies Created on: 05 January 2009 Author Bio Srinivasan Subbiah is an Application Developer working in HCL Technologies Limited on SAP NetWeaver Technology (CAF, Web Dynpro for JAVA, Guided Procedures and BPM) SAP AG 1
2 Table of Contents Introduction...3 Editing the Web Dynpro Component...4 Creating the RuleSet...6 Creating a Decision Table...7 Editing the Process...13 Testing the Application...16 Related Content...17 Disclaimer and Liability Notice SAP AG 2
3 Introduction After following the End-To-End process implementation, we will have a process with two human activities. First human activity will get the name and age. Second human activity will display them. We would have assigned User_A for first activity and User_B for the second one. In this article, we will have one more variable namely agestatus along with name and age in C_DisplayMyNameAge webdynpro component. Depending on the name and age, the agestatus variable will be set and will be displayed in the Display Name Age human activity. This will be achieved using the rule set, we will create in the process composer. The rule set will be consumed by a mapping activity. This mapping activity will be placed between the two previously created human activities. The process diagram after following End-to-End process implementation article will look like the following figure SAP AG 3
4 Editing the Web Dynpro Component We have to add a string variable to the interface controller, component controller of C_DisplayMyNameAge and have to edit the view for showing it. Add the variable in the component controller and copy it to the interface controller as described in the specified article. Go to the view s context and create a variable and map it to that of component controller. View Controller: Go to view s layout. Add a new text view element to the root element and bind it to the agestatus attribute in the view s context SAP AG 4
5 Save the application and deploy it. Go to Development Infrastructure perspective and select the process component dc_my_name_age. Right click on it and select Sync Used DCs SAP AG 5
6 Creating the RuleSet Go to Process Composer perspective. Navigate to dc_my_name_age Process Modelling Rules and Functions. Right Click and select New RuleSet. In the New RuleSet pop-up, enter the CheckNameAndAge for Name field. Leave the Return Type to be String. In Parameters, add two string variables namely name, agestatus and an integer variable, age. We will use the variables name and age in the condition. The result will be saved in the variable agestatus. It should be noted that the data type of both agestatus and Return Type are same SAP AG 6
7 CheckNameAndAge tab will open automatically. In the Result field, from the drop down, select agestatus. Here we are setting agestatus as the return variable. The value in agestatus will be returned to the process after executing the rule. Creating a Decision Table We will create a decision table. This decision table will check the name and age and accordingly will set the agestatus variable. For simplicity, we will check if the name is John and the age is less than 20, set agestatus as Teenage Boy, else if age is greater than 20, set agestatus as Young Man. If the name is Julie and age is less than 19, set agestatus as Teenage Girl, else if age is greater than 20 set agestatus as Young Lady. Go to Decision Tables, and click on New. Give a name in the Decision Table Name field and click on Next SAP AG 7
8 Here for us the conditions we need to check are name and age. So from Available Conditions add name and age to the Selected Conditions. Click Next SAP AG 8
9 Next we have to select the action. When a condition is satisfied this action will be executed. For us, this action should assign a string to the agestatus as this will be returned back. So from Available Actions add agestatus={string} to Selected Actions SAP AG 9
10 Select Finish. The decision table will be opened automatically. Now we have to enter the condition and action values. Right click on Default Value under name and select Add Condition Values. Enter the condition value for name. In our case, it will be John SAP AG 10
11 Click ok. Delete the default value by right clicking it. Similarly add the values for age and agestatus and values for Julie also. The final decision table will look like this. For setting the agestatus, we can fill a static string by just clicking on the cell and entering the value. Alternatively, we can also manipulate the values using Set Dynamic Value property which we will get by right clicking on the cell. We have to create a rule. This rule will be called in the process and it will have to execute the decision table. Select the Overview tab. Go to the Rules section. Create a new rule by clicking on New button. Enter the name of the rule as CheckNameAndAgeRule. The rule will open. Click on the add(+) button under If. Select Operation.isSuccessful() and double click on name in the options as shown below. Then similarly select the value true and enter * there SAP AG 11
12 Similarly select the add symbol under Then and select Evaluate Decision Table CheckNameAndAgeDecisionTable. Finally the rule will look like this. Thus we have created a rule which will be executed for any name entered SAP AG 12
13 Editing the Process Now we will edit the process. We will add a mapping activity and a String Data Object for accommodating the agestatus in the process context. First we will create a Data Object. Select the Display Name Age human activity and from quick buttons select Artifacts. Enter a name for it. Select String data type for the data object from Data Type tab. Now we will create a Mapping activity. Delete the connection between the two human activities. Select Fill Name Age and create a mapping activity. Give a name to the mapping activity say RuleInvoker. Form a sequence connection from RuleInvoker mapping activity to the Display Name Age human activity SAP AG 13
14 The process diagram will look like this. Select the RuleInvoker mapping activity and select Mapping tab. Drag FillMyNameAgeContext Name and FillMyNameAgeContext Age from left hand side to the AgeStatus in the right hand side. Double click on the red marked icon for editing the function. Remove the existing function. Select the rule set we created from Rules And Context demo.sap.com/dc_name_age CheckNameAndAge. From the Context, drag and drop the name and age. The final expression will be like the following SAP AG 14
15 Make sure to fill an empty string for agestatus. Click OK. Select Display Name Age and do input mapping. Save the application, build and deploy it SAP AG 15
16 Testing the Application Start the process from NetWeaver administrator. Using the User_A s account, log onto the portal. In his work items we can find FillMyNameAge activity. Open it and fill the details. Using User_B s account, log on to portal. Open the activity, DisplayMyNameAge. There we can see the output. It can be seen that since name is John and age is 27, we are getting the statement Young Man. Similarly you can also test the other options also SAP AG 16
17 Related Content End-To-End process implementation How to use Decision Tables in Rules Composer Building a Composite Application from scratch-part 3 For more information, visit the Composition homepage 2008 SAP AG 17
18 Disclaimer and Liability Notice This document may discuss sample coding or other information that does not include SAP official interfaces and therefore is not supported by SAP. Changes made based on this information are not supported and can be overwritten during an upgrade. SAP will not be held liable for any damages caused by using or misusing the information, code or methods suggested in this document, and anyone using these methods does so at his/her own risk. SAP offers no guarantees and assumes no responsibility or liability of any type with respect to the content of this technical article or code sample, including any liability resulting from incompatibility between the content within this document and the materials and services offered by SAP. You agree that you will not hold, or seek to hold, SAP responsible or liable with respect to the content of this document SAP AG 18
Integration of Web Dynpro for ABAP Application in Microsoft Share Point Portal
Integration of Web Dynpro for ABAP Application in Microsoft Share Point Portal Applies to: Web Dynpro ABAP. Summary This tutorial explains how to display Web Dynpro ABAP Application in Microsoft Share
More informationHow to Reference External JAR Files in Web Dynpro DC in SAP NW Portal 7.3
How to Reference External JAR Files in Web Dynpro DC in SAP NW Portal 7.3 Applies to: SAP NetWeaver Portal 7.3, NWDS 7.3. For more information, visit the Portal and Collaboration homepage. Summary This
More informationPOWL: Infoset Generation with Web Dynpro ABAP
POWL: Infoset Generation with Web Dynpro ABAP Applies to: WebDynpro ABAP Developer. For more information, visit the Web Dynpro ABAP homepage. Summary: This document explains how to create an Infoset, generate
More informationDialog Windows in WebDynpro ABAP Applications
Dialog Windows in WebDynpro ABAP Applications Applies to: WebDynpro ABAP For more information, visit the Web Dynpro ABAP homepage. Summary This document explains how to create popup dialog windows, external
More informationUsing Radio Buttons in Web Template
Using Radio Buttons in Web Template Applies to: SAP BW 3.5. For more information, visit the Business Intelligence homepage. Summary One of the ideal requirements in the BW Web Reporting is the user wants
More informationTable Row Popup in Web Dynpro Component
Table Row Popup in Web Dynpro Component Applies to Web Dynpro for ABAP, NW 7.0. For more information, visit the Web Dynpro ABAP homepage. Summary This document helps to create Table Rowpopin in a Web Dynpro
More informationEasy Lookup in Process Integration 7.1
Easy Lookup in Process Integration 7.1 Applies to: SAP NetWeaver Process Integration 7.1 For more information, visit the SOA Management homepage. Summary Unlike previous version of PI (7.0) / XI (3.0,
More informationBAPI Execution in offline Adobe Form
BAPI Execution in offline Adobe Form Applies to: Adobe form, Web dynpro JAVA, SAP ECC. For more information, visit the Web Dynpro Java homepage. Summary This article contains step by step description for
More informationAdd /Remove Links on ESS Home Page in Business Package 1.5
Add /Remove Links on ESS Home Page in Business Package 1.5 Applies to: SAP ECC EHP5. For more information, visit the Enterprise Resource Planning homepage. Summary Customizing links on ESS Overview page
More informationWeb Dynpro: Coloring Table Conditionally
Web Dynpro: Coloring Table Conditionally Applies to: SAP ECC 6.0. For more information, visit the Web Dynpro ABAP homepage. Summary This article is designed for the beginners in Web Dynpro who have ABAP
More informationFetching User Details from the Portal and Displaying it in Web Dynpro with Authentication in the Portal
Fetching User Details from the Portal and Displaying it in Web Dynpro with Authentication in the Portal Applies to: SAP NetWeaver Web Dynpro. For more information, visit the Portal and Collaboration homepage.
More informationLinking Documents with Web Templates
Linking Documents with Web Templates Summary This article explains certain ways to link documents with our Web-Templates which is a useful way of attaching information with a query. When the enduser runs
More informationHow to Create Top of List and End of List of the ALV Output in Web Dynpro for ABAP
How to Create Top of List and End of List of the ALV Output in Web Dynpro for ABAP Applies to: SAP Netweaver 2004S: Web Dynpro for ABAP. For more information, visit the User Interface Technology homepage.
More informationFederated Portal for Composite Environment 7.1
Federated Portal for Composite Environment 7.1 Applies to: This article applies to Federated Portal for Composition Environment. For more information, visit the Portal and Collaboration homepage Summary
More informationMDM Syndicator: Custom Items Tab
MDM Syndicator: Custom Items Tab Applies to: SAP NetWeaver Master Data Management (MDM) SP04, SP05 and SP06. For more information, visit the Master Data Management homepage. Summary This article provides
More informationMDM Import Manager - Taxonomy Data (Attribute Text Values) Part 3
MDM Import Manager - Taxonomy Data (Attribute Text Values) Part 3 Applies to: SAP NetWeaver Master Data Management (MDM) SP3, SP4, SP5. Summary This article provides a step-by-step procedure for manually
More informationFreely Programmed Help- Web Dynpro
Freely Programmed Help- Web Dynpro Applies to: SAP ABAP Workbench that supports Web dynpro development. For more information, visit the Web Dynpro ABAP homepage. Summary In addition to the Dictionary Search
More informationReplacement Path: Explained with an Illustrated Example
Replacement Path: Explained with an Illustrated Example Applies to: SAP NetWeaver BW. For more information, visit the EDW homepage Summary The document explains the purpose and implementation method of
More informationGraphical Mapping Technique in SAP NetWeaver Process Integration
Graphical Mapping Technique in SAP NetWeaver Process Integration Applies to: SAP NetWeaver XI/PI mappings. For more information, visit the Repository-based Modeling and Design homepage. Summary This guide
More informationWeb Dynpro ABAP: Changing ALV Contents and Saving in Database
Web Dynpro ABAP: Changing ALV Contents and Saving in Database Applies to: SAP ECC 6.0. For more information, visit the Web Dynpro ABAP homepage Summary The article is aimed to help beginners in Webdynpro
More informationDynamically Enable / Disable Fields in Table Maintenance Generator
Dynamically Enable / Disable Fields in Table Maintenance Generator Applies to: SAP ABAP. For more information, visit the ABAP homepage. Summary This article demonstrates on how to Enable / Disable fields
More informationSDN Community Contribution
SDN Community Contribution (This is not an official SAP document.) Disclaimer & Liability Notice This document may discuss sample coding or other information that does not include SAP official interfaces
More informationStep by Step Guide How to Use BI Queries in Visual Composer
Step by Step Guide How to Use BI Queries in Visual Composer Applies to: SAP BW 7.x. For more information, visit the EBW homepage. Summary The objective of this Article is to explain step by step guide
More informationMaterial Listing and Exclusion
Material Listing and Exclusion Applies to: Applies to ECC 6.0. For more information, visit the Enterprise Resource Planning homepage Summary This document briefly explains how to restrict customers from
More informationInternationalization in WebDynpro ABAP Applications
Internationalization in WebDynpro ABAP Applications Applies to: SAP ECC 6.0. For more information, visit the Web Dynpro ABAP homepage. Summary The article describes the concept and procedure of developing
More informationStep By Step: the Process of Selective Deletion from a DSO
Step By Step: the Process of Selective Deletion from a DSO Applies to: SAP NetWeaver BW. For more information, visit the EDW homepage. Summary Selective deletion from DSO refers to deleting specific values
More informationUpload Image file from system in Web dynpro view
Upload Image file from system in Web dynpro view Applies to: Web Dynpro for Java UI Development, SAP NetWeaver 2004s. For more information, visit the User Interface Technology homepage. For more information,
More informationDisplaying SAP Transaction as Internet Application in Portal
Displaying SAP Transaction as Internet Application in Portal Summary This article explains how we can display SAP transaction as Internet Application Components (IAC) in portal to make it simpler for the
More informationMaterial Master Archiving in Simple Method
Material Master Archiving in Simple Method Applies to: This article is applicable for SAP MM Module of SAP Version SAP 4.7 till SAP ECC 6.0 Summary This article describes a process called Material Master
More informationOpen Text DocuLink Configuration - To Access Documents which are Archived using SAP
Open Text DocuLink Configuration - To Access Documents which are Archived using SAP Applies to: Open Text DocuLink for SAP Solutions 9.6.2. For more information, visit http://www.opentext.com Summary Open
More informationDeveloping Crystal Reports on SAP BW
Developing Crystal Reports on SAP BW Applies to: SAP BusinessObjects Crystal Reports. Summary This white paper explores various methods of accessing SAP BW data through Crystal Reports. Author: Arka Roy
More informationHow to Create Business Graphics in Web Dynpro for ABAP
Applies To: SAP Netweaver 2004s Internet Graphics Server 7.0 Summary The purpose of this document is to show you how to create business graphics in and to supply code samples to realize this. By: Velu
More informationE-Sourcing System Copy [System refresh from Production to existing Development]
E-Sourcing System Copy [System refresh from Production to existing Development] Applies to: SAP Netweaver 7.0 and E-Sourcing 5.1/CLM 2.0 Summary This document discusses about the steps to do an E-Sourcing
More informationTemplate Designer: Create Automatic PDF Documents for Attachment or Print Purpose
Template Designer: Create Automatic PDF Documents for Attachment or Print Purpose Applies to: SAP Customer Relationship Management (SAP CRM) Release 7.0 SP 01, November 2008. SAP NetWeaver 7.0 including
More informationStandalone BW System Refresh
Applies to: Software Component: SAP_BW. For more information, visit the EDW homepage Summary BW relevant steps/scenarios during refresh of an existing non-productive BW system from productive BW system
More informationCustom Password Reset Tool in SAP Enterprise Portal Using Web Dynpro for Java
Custom Password Reset Tool in SAP Enterprise Portal Using Web Dynpro for Java Applies to: SAP Enterprise Portal, Web Dynpro for Java. For more information, visit the Portal and Collaboration homepage.
More informationAdding Files as Attachments to SAP Interactive Forms in the Java Environment
Adding Files as Attachments to SAP Interactive Forms in the Java Environment Applies to: SAP NetWeaver 7.0, For more information, visit the SAP Interactive Forms by Adobe. Summary This document demonstrates
More informationSolution to the Challenges in Pivoting
Solution to the Challenges in Pivoting Applies to: SAP NetWeaver 2004s/ MDM 5.5 SP 06. For more information, visit the Master Data Management homepage. Summary This article strives to describe the different
More informationSDN Community Contribution
SDN Community Contribution (This is not an official SAP document.) Disclaimer & Liability Notice This document may discuss sample coding or other information that does not include SAP official interfaces
More informationWeb Dynpro ABAP: Dynamic Table
Applies to: SAP ECC 6.0 Summary Normally ABAP consultants might be aware of how to create internal table dynamically. This article aims to help the consultants how to display the dynamic table using Web
More informationCreation of Alert Data Service VC model for the BI query exception using Information Broadcasting
Applies To: SAP Netweaver 2004s Visual Composer 7.0 Summary The purpose of this document is to show how to create an alert data service VC model for the BI query exception using the Information broadcasting.
More informationios Ad Hoc Provisioning Quick Guide
ios Ad Hoc Provisioning Quick Guide Applies to: Applications developed for all kinds of ios devices (iphone, ipad, ipod). For more information, visit the Mobile homepage. Summary This article is a quick
More informationRecreating BIA Indexes to Address the Growth of Fact Index Table
Recreating BIA Indexes to Address the Growth of Fact Index Table Applies to: Software Component: SAP_BW.Release: 700 BIA version: 53 Summary In this article we would learn the application of recreating
More informationHow to Integrate SAP xmii Services with Web Dynpro Java
How to Integrate SAP xmii Services with Web Dynpro Java Applies to: SAP xmii 11.5 SAP Netweaver 04s Summary This document gives a step by step description on how SAP xmii services and objects can be exposed
More informationHow to Create and Schedule Publications from Crystal Reports
How to Create and Schedule Publications from Crystal Reports Applies to: SAP BusinessObjects Enterprise. For more information, visit the Business Objects homepage. Summary This white paper describes how
More informationWeb Dynpro Interactive Forms Data Transfer and Scripting
Web Dynpro Interactive Forms Data Transfer and Scripting Applies to: Webdynpro Java Development, Adobe Interactive forms, SAP NetWeaver 2004s. For more information, visit the User Interface Technology
More informationABAP HR: Standard Info Type Enhancement
ABAP HR: Standard Info Type Enhancement Applies to: This document applies to SAP ECC 6.0, SAP Netweaver 2004s. For more information, visit the ABAP homepage. Summary This article contains the step by step
More informationHow to Create Tables in MaxDB using SQL Studio
How to Create Tables in MaxDB using SQL Studio Wipro Technologies January 2005 Submitted By Kathirvel Balakrishnan SAP Practice Wipro Technologies www.wipro.com Page 1 of 11 Establishing a connection to
More informationStep By Step Procedure to Implement Soap to JDBC Scenario
Step By Step Procedure to Implement Soap to JDBC Scenario Applies to This scenario is implemented in PI 7.0 server, service pack: 14. For more information, visit the SOA Management homepage. Summary This
More informationStep by Step Guide on How to Use Cell Definition in BEx Query
Step by Step Guide on How to Use Cell Definition in BEx Query Applies to: SAP BI 7.0. For more information, visit the EDW homepage. Summary This article explains the functionalities of Cell Definition
More informationDB Connect with Delta Mechanism
Applies to: SAP BI/BW. For more information, visit the EDW homepage Summary This Article demonstrates the steps for handling Delta mechanism with Relational Database Management System (RDBMS) like SQL,
More informationHow to Integrate Web Dynpro ABAP in Portal and Capture Portal Logon User Name
How to Integrate Web Dynpro ABAP in Portal and Capture Portal Logon User Name Applies to: This document applies to SAP ECC 6.0, SAP Netweaver 2007 and above. For more information, visit the Web Dynpro
More informationTotals in Adobe forms
Applies to: Adobe Print forms designer version 8.0 in ECC6 For more information, visit the ABAP homepage. Summary This tutorial explains about Step-By-Step procedure to display subtotals and grand totals
More informationStep by Step Procedure for DSO Creation
Step by Step Procedure for DSO Creation Applies to: SAP BI 7.0. For more information, visit the EDW homepage. Summary This article discusses about the step by step procedure for creating a DSO. Author:
More informationHow to Download Multiple Files in ZIP using WebDynpro Java
How to Download Multiple Files in ZIP using WebDynpro Java Applies to: SAP NetWeaver 7.0 SP15 and onwards, For more information, visit the Web Dynpro Java homepage. Summary The document provides the core
More informationWorking with Tabstrip in Webdynpro for ABAP
Working with Tabstrip in Webdynpro for ABAP Applies to: SAP ECC 6.0 (Release 700, SP 12). For more information, visit the Web Dynpro ABAP homepage.. Summary This tutorial explains about Step-By-Step procedure
More informationCreating Custom SU01 Transaction Code with Display and Password Reset Buttons
Creating Custom SU01 Transaction Code with Display and Password Reset Buttons Applies to: All versions of SAP. Summary This article will explain you the process of creating custom SU01 transaction code
More informationLoad Info Cube in SCM 5.0 (BI 7.0)
Applies to: SCM 5.0 For more information, visit the Business Intelligence homepage. Summary The article illustrates the steps to load an info cube in SCM 5.0 Author: Bijal Parmar Company: Larsen & Toubro
More informationSUP: Personalization Keys and Synchronize Parameter
SUP: Personalization Keys and Synchronize Parameter Applies to: Blackberry Mobile. For more information, visit the Mobile homepage. Summary This article gives a brief idea about Personalization Keys and
More informationTable Properties and Table Popin
Applies to: SAP ECC 6.0. For more information, visit the Web Dynpro ABAP homepage Summary This article is designed to explain for setting the properties of Table at runtime based on condition and also
More informationHow to use Boolean Operations in the Formula as Subsidiary for IF Condition
How to use Boolean Operations in the Formula as Subsidiary for IF Condition Applies to: SAP BW 3.5 & BI 7.0. For more information, visit the EDW homepage. Summary This paper will explain you how to use
More informationSAP BI BO Unit/Currency Logic for Unknown Units Case Study
SAP BI BO Unit/Currency Logic for Unknown Units Case Study Applies to: This solution is implemented for a combination of SAP BO XI 3.1 SP2 FP 2.1 and SAP NW BI 7.0 EHP1 SP6 For more information, visit
More informationecatt Part 6 System Data Container
\ ecatt Part 6 System Data Container Applies to: SAP 5.0 Summary In the Part I of ecatt series, we covered the introduction to ecatt, its prerequisites, features, when to go for SAP GUI mode recording
More informationSetting up Connection between BW and R/3 for Data Load
Setting up Connection between BW and R/3 for Data Load Applies to: SAP BI 7.0. For more information, visit the Business Intelligence homepage. Summary This document guides to establish connection between
More informationUsing Nested Exception Aggregation in BEx Reports- Scenario
Using Nested Exception Aggregation in BEx Reports- Scenario Applies to: SAP BW 3.x & SAP BI Net Weaver 2004s. For more information, visit the Business Intelligence homepage. Summary The Objective of this
More informationFederated Portal Network Remote Role Assignment Step-by- Step Configuration
Federated Portal Network Remote Role Assignment Step-by- Step Configuration Applies to: Consumer Portal: SAP NetWeaver 2004s EhP1 SP6 Producer Portal: SAP NetWeaver CE EhP1 SP3 Summary This article describes
More informationHow to Display Traffic Lights for Exceptions in BI Web Reports
How to Display Traffic Lights for Exceptions in BI Web Reports Applies to: SAP BI 7.0. For more information, visit the Analytics homepage. Summary In a BI Web Report, it would look much better to display
More informationImplying Security on Business Object XI 3.1 Universe having SAP BW as Source
Implying Security on Business Object XI 3.1 Universe having SAP BW as Source Applies to: SAP Business Object XI 3.1. For more information, visit the Business Objects homepage. Summary This article describes
More informationDeploying BusinessObjects Explorer on Top of a SAP BI Query
Deploying BusinessObjects Explorer on Top of a SAP BI Query Applies to: SAP BI NetWeaver 2004s, BusinessObjects Explorer 3.1. For more information, visit the Business Intelligence homepage. Summary The
More informationPrinter Landscape Made Easy!!
Applies to SAP NetWeaver 2004s / SAP_BASIS 7.00. For more information, visit the Landscape Design and Architecture homepage. Summary This article deals with the step by step procedure to be carried out
More informationXcelsius Tricks Part 5 Create a Loading Bar in SAP Crystal Dashboard and Presentation Design (Xcelsius 2008)
Xcelsius Tricks Part 5 Create a Loading Bar in SAP Crystal Dashboard and Presentation Design (Xcelsius 2008) Applies to: SAP Crystal Dashboard and Presentation Design (Xcelsius 2008). For more information,
More informationHow to Configure User Status in mysap SRM
How to Configure User Status in mysap SRM Applies to: mysap SRM 5.5 For more information, visit the Supplier Relationship Management homepage. Summary There had been quite a few instances in SRM Forum
More informationStep-By-Step guide to Virtual InfoCube Implementation
Step-By-Step guide to Virtual InfoCube Implementation Applies to: SAP NetWeaver BW. For more information, visit the EDW homepage Summary This article provides a detailed insight into Virtual Infocube data
More informationReading Enhanced DataSource fields for the Remote Cube
Reading Enhanced DataSource fields for the Remote Cube Applies to: SAP BI 7.0. For more information, visit the EDW homepage. Summary SAP Remote Cube does not display the enhanced fields in the data source.
More informationCommon Queries/Errors while working with Adobe Print PDF Forms
Common Queries/Errors while working with Adobe Print PDF Forms Applies to: SAP Adobe Forms (Print-based forms) Summary This document lists common queries and errors while working on Adobe Print Forms.
More informationCreating Multiple Methods/Operations and Exposing BAPI as a Webservice
Creating Multiple Methods/Operations and Exposing BAPI as a Webservice Applies to: SAP Netweaver 7.0 SP14. For more information, visit the SOA Management homepage. Summary This article discuss about how
More informationCreating, Configuring and Testing a Web Service Based on a Function Module
Creating, Configuring and Testing a Web Service Based on a Function Module Applies to: SAP EC6 6.0/7.0. For more information, visit the Web Services homepage. Summary The article describes how to create
More informationHow to Work with F4 Input Help Effectively in BEX
How to Work with F4 Input Help Effectively in BEX Applies to: SAP BI 7.0 developers and Reporting Users. For more information, visit the Business Intelligence home page Summary This document helps to overcome
More informationHow to Create View on Different Tables and Load Data through Generic Datasource based on that View
How to Create View on Different Tables and Load Data through Generic Datasource based on that View Applies to: SAP Business Intelligence (BI 7.0). For more information, visit the EDW homepage Summary This
More informationStep by Step Method for File Archival in BW
Step by Step Method for File Archival in BW Applies to: SAP BW 3.x & SAP BI Net Weaver 2004s. For more information, visit the EDW homepage. Summary This document will give the reader step by step approach
More informationData Extraction & DS Enhancement in SAP BI Step by Step
Data Extraction & DS Enhancement in SAP BI Step by Step Applies to: SAP BI 7.0, SAP ABAP, For more information, visit the Business Intelligence homepage. Summary The objective of the article is to outline
More informationMaintaining Roles and Authorizations in BI7.0 - RSECADMIN
Maintaining Roles and Authorizations in BI7.0 - RSECADMIN Applies to: SAP Business Intelligence 7.0. For more information, visit the Business Intelligence homepage. Summary This paper will take you through
More informationExtracting Missing Fields of Data Source Which Are Present In Their Extract Structure
Extracting Missing Fields of Data Source Which Are Present In Their Extract Structure Applies to: ECC 6.0 and BI 3.x and 7.0 For more information, visit the Business Intelligence homepage. Summary Many
More informationPurpose of Goods Receipt Message indicator in Purchase Orders
Purpose of Goods Receipt Message indicator in Purchase Orders Applies to: This article is applicable for SAP MM Module of SAP for version SAP 4.7 till SAP ECC 6.O. For more information, visit the Supply
More informationValidity Table in SAP BW/BI
Applies to: Applicable for SAP BI 3.x and above Summary To maintain the cubes non cumulative Key figures. Author: Om Ambulker Company: Cognizant, Pune Created on: 15 July 2011 Author Bio Om Ambulker is
More informationLimitation in BAPI Scheduling Agreement (SA) Create or Change
Limitation in BAPI Scheduling Agreement (SA) Create or Change Applies to: SAP ECC 6.0.For more information, visit the ABAP homepage. Summary The article describes the limitations in standard SAP BAPIs
More informationStep by Step Guide for PI Server Start and Stop Procedure
Step by Step Guide for PI Server Start and Stop Procedure Applies to: This document applies to PI 7.0 and 7.1 and above. For more information, visit the Application Management homepage. Summary This document
More informationSDN Community Contribution
SDN Community Contribution (This is not an official SAP document.) Disclaimer & Liability Notice This document may discuss sample coding or other information that does not include SAP official interfaces
More informationCreation of Key Figures with Higher Decimal Place Precision
Creation of Key Figures with Higher Decimal Place Precision Applies to: SAP Business Intelligence 7.0. Summary The objective of this Document is to explain how to Create Key figures with higher number
More informationExtraction of Hierarchy into Flat File from R/3 and Loading in BW System
Extraction of Hierarchy into Flat File from R/3 and Loading in BW System Applies to: This article applies to SAP R/3 (any version) and SAP B/W (any version).for more information, visit the Business Intelligence
More informationCurrency Translation in SAP BI Step by step Guide
Currency Translation in SAP BI Step by step Guide Applies to: SAP BIW 3.5, SAP NetWeaver 7.0. For more information, visit the Business Intelligence homepage. Summary Currency translation allows you to
More informationHow to Develop a Simple Crud Application Using Ejb3 and Web Dynpro
How to Develop a Simple Crud Application Using Ejb3 and Web Dynpro Applies to: SAP Web Dynpro Java 7.1 SR 5. For more information, visit the User Interface Technology homepage. Summary The objective of
More informationHow to Default Variant Created for Report Developed In Report Painter/Writer
How to Default Variant Created for Report Developed In Report Painter/Writer Applies to: Any business organization having reports developed using Report Painter/Report Writer. This is applicable from R/3
More informationWDA Tutorial II: Using Select Options in a WDA Application
Applies To: SAP NetWeaver 2004s Web Dynpro for ABAP Summary This tutorial provides a step-by-step guide for using Select Option functionality in a WDA application. This tutorial assumes that you have completed
More informationThis article explains the steps to create a Move-in letter using Print Workbench and SAPScripts.
Applies to: SAP IS-Utilities 4.6 and above. Summary This article explains the steps to create a Move-in letter using Print Workbench and SAPScripts. Author: Company: Hiral M Dedhia L & T Infotech Ltd.
More informationData Flow During Different Update Mode in LO Cockpit
Data Flow During Different Update Mode in LO Cockpit Applies to: SAP BW 3.x & SAP BI NetWeaver 2004s. For more information, visit the Business Intelligence homepage. Summary The objective of this Article
More informationA Step-by-Step Guide on IDoc-ALE between Two SAP Servers
A Step-by-Step Guide on IDoc-ALE between Two SAP Servers Applies to: All modules of SAP where data need to transfer from one SAP System to another SAP System using ALE IDoc Methodology. For more information,
More informationInformation Broadcasting Part 3 Scheduling the First Report
Information Broadcasting Part 3 Scheduling the First Report Applies to: SAP BW 3.5 Summary This is part-3 article in the Information broadcasting (IB) series. Some things have already been discussed like
More informationData Mining: Scoring (Linear Regression)
Data Mining: Scoring (Linear Regression) Applies to: SAP BI 7.0. For more information, visit the EDW Homepage Summary This article deals with Data Mining and it explains the classification method Scoring
More informationFinancial Statement Version into PDF Reader
Financial Statement Version into PDF Reader Applies to: SAP release 4.7EE, ECC 5.0 and ECC 6.0. For more information, visit the Enterprise Resource Planning homepage Summary: The objective of this article
More information