SDN Community Contribution

Transcription

1 SDN Community Contribution (This is not an official SAP document.) Disclaimer & Liability Notice This document may discuss sample coding or other information that does not include SAP official interfaces and therefore is not supported by SAP. Changes made based on this information are not supported and can be overwritten during an upgrade. SAP will not be held liable for any damages caused by using or misusing the information, code or methods suggested in this document, and anyone using these methods does so at his/her own risk. SAP offers no guarantees and assumes no responsibility or liability of any type with respect to the content of this technical article or code sample, including any liability resulting from incompatibility between the content within this document and the materials and services offered by SAP. You agree that you will not hold, or seek to hold, SAP responsible or liable with respect to the content of this document SAP AG The SAP Developer Network: 1

2 Applies To: SAP 4.6C - s Summary This document explains how to use Table, Template, Loop, and Command to display the set of records in s. By: J.Jayanthi Company: Wipro Technologies Date: Table of Contents Applies To:...2 Summary...2 Table of Contents...2 Procedure...2 Template...4 Command...5 Loop...5 Table...6 Code Sample..7 Output Screen: Template...8 Output Screen: Loop...9 Output Screen:Table...9 Author Bio SAP AG The SAP Developer Network: 2

3 Procedure 1. Go to transaction SMARTFORMS. 2. Create a Form (say zzz_test1). 3. In Global Definitions->Global Data, 4. Variable Name Type Assignment Reference Type ZZZ_MAKT TYPE ZZZ_MAKT ITAB TYPE STANDARD TABLE OF ZZZ_MAKT WA TYPE ZZZ_MAKT 5. In Main window->output Options, fill the necessary details as shown below SAP AG The SAP Developer Network: 3

4 6. Then right click Main window and create Program line. 7. In Code, give ZZZ_MAKT as input parameter and itab as output parameter. 8. Write the following in the coding part. select * from zzz_makt into table itab. Template 1. Right click Code and create a Loop. 2. In its Data tab, Internal Table ITAB into wa 2005 SAP AG The SAP Developer Network: 4

5 3. Right Click the Loop and Create a Template. In that, design the Template as shown below by selecting Pattern to display Output. 4. Create three text elements (say Text2, Text4, Text3). 5. Drag ZMATNR, ZMAKTX and PICK from the Field list and put in the above mentioned Text Elements-> General Attributes respectively. 6. In Text2->Output Options, make the Line and Column as 1 and 1 respectively. 7. In Text4->Output Options, make the Line and Column as 1 and 2 respectively SAP AG The SAP Developer Network: 5

6 8. In Text3->Output Options, make the Line and Column as 1 and 3 respectively. Command 1. Right Click the Loop and create a Command (say %COMMAND2). Make the Command after Template (move accordingly). We are making use of Command to page break. 2. In Command->General Attributes, check mark Go to new page and give the page no. (say %PAGE). 3. Then right Click the %CODE1 and create another loop and move it after %COMMAND2. Loop 1. In Loop->Data, Internal table itab into wa. The settings of Loop->Output options is shown below [Since in the output, we are going to display a box with border] SAP AG The SAP Developer Network: 6

7 2. Create a text element (say %TEXT1) under that Loop and design the Text->General Attributes as below SAP AG The SAP Developer Network: 7

8 3. Create a Command (say %Command1) under %Loop1 and do as we did before for %Command2. Table 1. Right click %Code1 and Create a Table [say %Table1]. 2. Design Table->Table tab as below SAP AG The SAP Developer Network: 8

9 3. In Table->Data, Internal table itab into wa. 4. Create three Text Element by right clicking %Table1 [say %CELL1, %CELL2, %CELL3]. 5. Drag ZMATNR, ZMAKTX, PICK from fieldlist and put in the created text elements. 6. In CELL1->Output Options, 7. Check mark New Line and New Cell and choose the Line type as Line1 which we created in Table- >Table. 8. For CELL2 and CELL3, check mark New Cell in Output options SAP AG The SAP Developer Network: 9

10 Code Sample REPORT zzz_jaytest3. * Variable Declaration data : v_form_name TYPE rs38l_fnam. call function 'SSF_FUNCTION_MODULE_NAME' exporting formname = 'ZZZ_TEST1' importing fm_name = v_form_name exceptions no_form = 1 no_function_module = 2 others = 3. IF sy-subrc <> 0. MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4. ENDIF. CALL FUNCTION v_form_name EXCEPTIONS FORMATTING_ERROR = 1 INTERNAL_ERROR = 2 SEND_ERROR = 3 USER_CANCELED = 4 OTHERS = 5. IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4. ENDIF. Output Screen: Template Then you can see the following output after executing the program in SE38.The following is the Output for TEMPLATE: 2005 SAP AG The SAP Developer Network: 10

11 Output Screen: Loop This is the Output for LOOP: 2005 SAP AG The SAP Developer Network: 11

12 Output Screen: Table This is the Output for TABLE: 2005 SAP AG The SAP Developer Network: 12

13 Author Bio J.Jayanthi works as Senior Software Engineer at Wipro Technologies SAP AG The SAP Developer Network: 13