Instruction Manual Winnie The Pooh Highchair

Transcription

1 Instruction Manual Winnie The Pooh Highchair IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT KEEP FOR FUTURE REFERENCE

2 2 Safety Warnings Getting to know your Highchair 3 Thank you for choosing OBABY. To ensure that your highchair is used in accordance with these instructions, please read them fully. This highchair conforms to BS EN 14988:2006 and is guaranteed for 12 months from the date of purchase against manufacturing defects. If, however you have any problems, please contact your OBABY retailer from whom you purchased your product, who will take appropriate action. Tray Your child s safety may be affected if you do not follow these instructions. WARNING: A child s safety is your responsibility WARNING: Do not leave the child unattended WARNING: Ensure the harness is correctly fitted WARNING: Do not use the highchair unless all components are correctly fitted and adjusted WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc in the vicinity of the highchair WARNING: The child should be clear of moving parts while making adjustments or opening or folding the highchair. Risk of serious injury (entrapment, laceration or amputation ) exists Harness Only use on a stable, level surface Do not use this highchair until the child can sit unaided Do not move the highchair with your child inside Do not use the highchair is any part is broken, torn or missing and use only spare parts approved by the manufacturer ROUTINE CARE & MAINTENANCE - This highchair requires regular maintenance by the user - For cleaning, use only a mild detergent and warm water - DO NOT USE BLEACH - DO NOT USE any abrasive substances - From time to time, check your highchair for loose screws, worn parts, torn material or stitching. Replace or adjust the parts as needed. Seat unit Seat back support bar Front leg Due to constant updating and improvements, some components may occasionally differ slightly from the images shown in these instructions. We reserve the rights to change the specifications of any products without prior notice. If you need any assistance please contact your OBABY retailer from whom you purchased your product, who will take appropriate action. Back leg

3 4 Fitting the Seat Back Fitting the Legs 5 fig. 1 fig. 2 fig. 3 fig. 7 fig. 8 fig. 9 Click Click fig. 4 fig. 5 fig. 6 fig. 10 fig. 11 fig. 12 Unclip the press-studs on either side of the Highchair as shown (fig.1). Slide the curved part of the seat back support bar into the fabric pocket on the seat back, whilst the highchair is still folded (fig.2 & 3). Slide the two ends of the seat back support bar into the seat frame tubes (fig.4) and push in the spring buttons (fig.5). Continue to push the frame together until the buttons click into place in the holes on the tubes (fig.6). Secure the seat into position by re-clipping the press-studs onto the frame as shown (fig.1). The front and rear legs are a different width. Please be aware that the rear leg is narrower at the top, than the front leg (fig.7). Push the front leg a little way into the seat frame tubes at both sides evenly (fig 8 & 9). Push in the spring buttons (fig.10), continuing to push the legs until the buttons click into place in the holes (fig.11 & 12). Repeat this process until each leg is fitted securely. The fit of the legs in the frame is very tight for added security. Do not force the legs into position, but apply an even and constant pressure. Should the highchair need to be taken apart, gently push in the spring buttons and evenly ease out the leg assemblies.

4 6 Unfolding your Highchair Folding your Highchair 7 Lower Lift fig. 13 fig. 14 fig. 15 fig. 19 fig. 20 fig. 21 Click Lower fig. 16 fig. 17 fig. 18 fig. 22 fig. 23 fig. 24 To unfold your highchair, lift the tray above the seat and pull apart the legs (fig.13). On either side of the seat, fasten the seat sides to the frame using the press-studs (fig.14) (this will only need to be performed once). Lower the tray down onto the front frame (fig.15) and push the tray and frame together until it clicks into place (fig.16). To fold your highchair, unfasten the press-stud underneath the tray (fig.19) and unclip the tray from the frame by lifting the tray (fig.20). Lift the tray above the seat (fig.21) and fold the legs together (fig.22). Then lower the tray (fig.23 & 24). Secure the tray using the strap and press-stud (fig.17 & 18).

5 8 Using the Harness fig. 25 fig. 26 fig. 27 fig. 28 fig. 29 To fasten the harness, insert both fasteners on the waist strap into the clasp on the crotch strap (fig.25) and clip each chest strap onto the waist strap (fig.26 & 27). To release the harness, squeeze each of the clips in the centre of the harness and pull away from the clasp, one at a time (fig.28). Adjust the harness length using the buckles on each strap (fig.29).

6 Disney Based on the Winnie the Pooh works by A.A Milne and E.H. Shepard.