Click. Installation Instalación Instalação. NEMA Size 00 NEMA Taille 00 NEMA Tamaño 00. "A" Connection must be fitted by user
|
|
- Shona Malone
- 6 years ago
- Views:
Transcription
1 Bulletin 59 E PLUS Overload Relay Application and Installation Application et installation du relais de surcharge Famille 59 E PLUS Aplicación e instalación del relé de sobrecarga, Boletín 59 E PLUS (Cat 59*-EE ) Installation Instalación Instalação ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing. Install in suitable enclosure. Keep free from contaminants. ATTENTION: Avant le montage et la mise en service, couper l'alimentation secteur pour éviter toute décharge. Prévoir une mise en coffret ou armoire appropriée. Protéger le produit contre les environnements agressifs. ATENCION: Desconéctese de la corriente eléctrica, antes de la instalación o del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una caja apropiada. Manténgalo libre de contaminantes. NEMA Size 00 NEMA Taille 00 NEMA Tamaño EE_T (.55 N m) 4 6 lb-in (.8 N m) Connection must be fitted by user Connexion à régler par l'utilisateur Click La conexión debe ser realizada por el usuario Wiring Diagram Size 00 ( Phase) - 59 Wiring Diagram Size 00 ( Phase) - 59S L L L L O.L. O.L T T T Motor Motor () Printed in U.S.A.
2 NEMA Size 0,, NEMA Taille 0,, NEMA Tamaño 0,, (.55 N m) lb-in ( N m) Connection must be fitted by user Connexion à régler par l'utilisateur La conexión debe ser realizada por el usuario 59*-EE_C NEMA Size 0, Calibre NEMA 0, NEMA Size Calibre NEMA CAT CAT 59*-EE_C 0-6 lb-in (. -.9 N m) 59*-EE_C 0-40 lb-in ( N m) Wiring Diagram Size 0,, ( Phase) - 59 Wiring Diagram Size 0,, ( Phase) - 59S L L L L T T T
3 NEMA Size NEMA Taille NEMA Tamaño 0-70 lb-in (.4-9. N m) (.55 N m) 5 4 Connection must be fitted by user Connexion à régler par l'utilisateur La conexión debe ser realizada por el usuario 59*-EE_D 8-40 lb-in ( N m) Wiring Diagram Size ( Phase) - 59 Wiring Diagram Size ( Phase) - 59S L L L L T T T
4 Trip Curve Courbe de déclenchement Auslösekurve Curva del disparo Curva de disparo Curva di intervento COLD START DEMARRAGE A FROID KALTSTART ARRANQUE EN FRIO PARTIDA À FRIO AVVIAMENTO A FREDDO HOT START DEMARRAGE A CHAUD WARMSTART ARRANQUE EN CALIENTE PARTIDA À QUENTE AVVIAMENTO A CALDO 000 Class 0 Class Class 0 Class Multiple of FLA Intensités pleine charge multiples Múltiplo de FLA Vielfache des FLA-Wertes Intensités pleine charge multiples Multiplo di Max amp.
5 E PLUS Features Caract ristiques du E PLUS Caracter sticas del E PLUS Push To Test Enfoncer pour tester Presione para probar Push to Reset Enfoncer pour réinitialiser Presione para reiniciar RESET MODE A M TRIP CLASS A = Automatic/Manual Reset Mode A = Mode de réinitialisation automatique/manuel A = Modo de reinicio automático/manual M = Manual Reset Mode M = Mode de réinitialisation manuel M = Modo de reinicio manual Trip Indicator Window Yellow indicator not visible: Not Tripped. Yellow indicator visible: Tripped. Fenêtre d'indicateur de déclenchement Indicateur jaune non visible : pas de déclenchement Indicateur jaune visible : déclenchement Ventana indicadora de disparo Indicador amarillo no visible: No disparado Indicador amarillo visible: Disparado Reset Bar Removed for Clarity Barre de réinitialisation supprimée pour plus de clarté Se eliminó la barra de reinicio para mayor claridad Selectable Trip Class Classe de déclenchement sélectionnable Clase de disparo seleccionable S.F. S.F. <.5 S.F. >.5 FLA =.9 X FLA = X FLA To adjust trip current, turn dial until the desired current is aligned with the pointer. Trip rating is 0% of dial setting. Pour régler l'intensité de déclenchement, tournez le cadran jusqu'à ce que le pointeur soit sur l'intensité voulue. La valeur nominale de déclenchement est de 0% du réglage cadran. Para ajustar la corriente del disparo, gire el dial hasta que la corriente deseada esté alineada con la marca. La capacidad nominal del disparo es el 0% del posicionamiento del dial. Y = FLA.7 Main Connections Raccordements Principale Collegamenti Principale Terminal Screw x x 59-EE_T 59-EE_C 59-EE_D M5 4 6 AWG lb-in 4 0 AWG 0 lb-in x x M5 4 6 AWG lb-in 4 0 AWG 0 lb-in x x M8 AWG 6 AWG # # -- x 6 mm x 6 mm mm Control Connections Bornes de Commande Morsetti di Commando Terminal Screw x x M 4 0 AWG 4 0 AWG # 0.6 x.5 mm
6 NEMA Size 00 NEMA Taille 00 NEMA Tamaño [7.9] [.7].5 [.7] 4. [05.6] 4.0 [0.6]. [8.6] 5.. [4.5] [0.7].8.0 [4.].5 [8.].9 [47.].6 [4.95] RESET BUTTON TRAVEL:.0 [.5] NEMA Size 0,,, NEMA Taille 0,,, NEMA Tamaño 0,,, C B D E L F A G "H" I "J" K RESET BUTTON TRAVEL:.0 [.5] M NEMA SIZE 0- A 7.6 [9.8] 9. []. [6.7] B.6 [90.4].9 [00.] 6. [55.5] C.8 [45.].0 [50.0].75 [69.9] D 0.4 [9.8] 0.4 [9.8] 0.78 [9.9] E 0. [7.] 0. [7.] 0. [7.9] F 5.0 [5.9] 6.0 [5.6] 9.7 [5.4] G 7. [79.4] 8.6 [9.] 8.66 [9.9] H. [0.7]. [0.7].7 [4.4] I 0.9 [.9]. [7.7].9 [47.5] J K.8 [69.9]. [80.] 5.5 [9.9] L 4.4 [.7] 4.7 [8.] 5.9 [50.] M 4. [07.5] 4.4 [] 6.06 [54] () Printed in U.S.A.
Onico Medium and Large Global Trac
DO NOT REMOVE THE LED ASSEMBLY. THIS WILL VOID THE WARRANTY. Call Zumtobel at 1- for questions RISK OF FIRE AND ELECTRICAL SHOCK Contact, improper installation, or improper servicing MAY RESULT IN DEATH
More informationUnscrew junction box to mount Moda DMX Wiring Hub to surface
MODA WIRING HUB 1 This product must be installed in accordance with the applicable installation code, by a person familiar with the construction and operation of the product and the hazards involved. Ensure
More informationFlex Operators Operador flexible Opérateur flexible
s Flex Operators Operador flexible Opérateur flexible Installation Instructions / Instructivo de Instalación Item: MFKE _ MFKE MFKE _ MFKE MFKE _ For Use With Frame EG Para Usar Con Caja Base EG Hazardous
More informationControlLogix Redundant Power Supply Chassis Adapter Module
Installation Instructions ControlLogix Redundant Power Supply Chassis Adapter Module Catalog Number 1756-PSCA Use this publication as a guide when installing the ControlLogix 1756-PSCA chassis adapter
More informationLED FLOODLIGHT FLAT series
LED SMD FLAT Floodlights are a great step forward in the lighting industry. Their energy consumption is much lower and performance is oſten higher than that of all other widely used types of fixtures.
More informationFGEC3065KB1 FGEC3065KS1 FGEC3065KW1
Product No. FGEC305KB1 FGEC305KS1 FGEC305KW1 Series 30" elec 30" elec 30" elec Color black stainless white Market North America North America North America Wiring Diagram 3871700 3871700 3871700 Owner's
More informationMicroLogix 1200 Isolated Relay Output Module
Installation Instructions MicroLogix 1200 Isolated Relay Output Module (Catalog Number 1762-OX6I) Inside For More Information...2 Description...3 Installation...3 Mounting...5 System Assembly...7 Field
More informationLVB-2 INSTRUCTION SHEET. Leakage Current Verification Box
LVB-2 INSTRUCTION SHEET Leakage Current Verification Box V 1.02 1.2018 DECLARATION OF CONFORMITY Manufacturer: Address: Product Name: Model Number: Associated Research, Inc. 13860 W. Laurel Dr. Lake Forest,
More informationInstallation Instructions
Installation Instructions MicroLogix 1762-IA8 120V ac Input Module Inside Description...3 Installation...4 Mounting...5 System Assembly...7 Field Wiring Connections...7 I/O Memory Mapping...10 Specifications...11
More informationFLEX Integra 2 Input/2 Protected Output Module
Installation Instructions FLEX Integra 2 Input/2 Protected Output Module (Cat. No. 1793-IB2XOB2P and -IB2XOB2PS) 41355 Module Installation This module mounts on a DIN rail. It connects to an adapter or
More information1769 Compact I/O Communication Bus Expansion Cables
1769 Compact I/O Communication Bus Expansion Cables (Cat. No. 1769-CRR1, 1769-CRR3, 1769-CLL1, 1769-CLL3, 1769-CRL1, 1769-CRL3) Installation Inside... For More Information... 2 Hazardous Location Considerations...
More informationFLEX Integra 4 Input Module
Installation Instructions FLEX Integra 4 Input Module (Cat. No. 1793-IB4 and -IB4S) 41355 Module Installation This module mounts on a DIN rail. It connects to an adapter or another FLEX I/O or Integra
More informationInstallation Instructions
Installation Instructions MicroLogix 1762-IQ8 DC Input Module Inside Description...3 Installation...4 Mounting...5 System Assembly...7 Field Wiring Connections...7 I/O Memory Mapping...10 Specifications...11
More informationMicroLogix 1762-OB16 Solid State 24V dc Source Output Module
Installation Instructions MicroLogix 1762-OB16 Solid State 24V dc Source Output Module Inside Description...3 Installation...4 Mounting...5 System Assembly...7 Field Wiring Connections...7 I/O Memory Mapping...10
More informationFlexArmor 24V dc Sinking Input Modules
Installation Instructions FlexArmor 24V dc Sinking Input Modules Catalog Number 1798-IB4 & 1798-IB8 42638 The FlexArmor I/O modules (Cat. No. 1798-IB4 & 1798-IB8) mount in a FlexArmor Baseplate. Use compatible
More informationArmorBlock MaXum Robot I/O Cable Base and Kempf Box Plate
Installation Instructions ArmorBlock MaXum Robot I/O Cable Base and Kempf Box Plate (Cat. No. 1792D-CB23 and -KPLT) CB23 KPLT 43338 43333 The 23mm ArmorBlock MaXum Robot Ι/Ο Cable Base mates with 4 or
More informationMax - Flex TM Operators Operadores Max-Flex TM Opérateurs Max-Flex TM
s Max - Flex TM Operators Operadores Max-Flex TM Opérateurs Max-Flex TM Item: Installation Instructions / Instructivo de Instalación U.S. Cat. No. Euro Order No. MFMF VL900-JN0 MFKFR VL900-JM0 MFCF06 VL900-JQ
More information400 Series 460 Surge Protective Device Installation, Operation and Maintenance Manual
400 Series 460 Surge Protective Device Installation, Operation and Maintenance Manual Installation, Operation and Maintenance Manual IO-70104 Rev 1, 1/2014 EMERSON NETWORK POWER SURGE PROTECTIVE DEVICE
More informationAnybus X-gateway USER MANUAL
Anybus X-gateway USER MANUAL HMSI-27-262 3.0 ENGLISH Important User Information Liability Every care has been taken in the preparation of this document. Please inform HMS Industrial Networks AB of any
More informationSavi W440 Wireless Headset System
Savi W440 Wireless Headset System Guide de démarrage rapide Guia de Início Rápido QUICK START GUIDE 3 en 5 1 3 4 1.1 1.2 2 7 7.4 Welcome Congratulations on purchasing your new Plantronics product. This
More informationTest Kit, Communication Adapter, Power Supply Dispositivo de prueba Pocket de test pour
s Test Kit, Communication Adapter, Power Supply Dispositivo de prueba Pocket de test pour Installation Instructions / Instructivo de Instalación U.S. Cat. No. Euro Order No. Item: VL000-AK0 For Use With
More informationWelcome To The World of Evolis Card Printer Products!
Welcome To The World of Evolis Card Printer Products! Congratulations on making the Tattoo printer your choice! Please read carefully this Operating Guide before installing your printer. It is a quick
More informationCellular Select Gate Installer Guide Models SG2CL, SG3DMCL, SG3DMRCL
Cellular Select Gate Installer Guide Models SG2CL, SG3DMCL, SG3DMRCL NOTE: This Product Requires GSM Carrier/SIM with Active Talk (Voice) and Text (SMS) Services For Operation Hialeah, FL 33016 www.selectses.com
More informationVariable Depth Flange Operator Accionador de Profundidad variable, Tipo VL Mécanisme d'actionnement à profondeur variable.
s Variable Depth Flange Operator Accionador de Profundidad variable, Tipo VL Mécanisme d'actionnement à profondeur variable. Installation Instructions / Instructivo de Instalación U.S. Cat. No. Euro Order
More informationMFKF3R 3VL9300-3JM01 MFKF43R 3VL9300-3JM41 MFCF036 3VL9300-3JQ31 MFCF048 3VL9300-3JQ41
s Max - Flex TM Operators Operadores Max-Flex TM Opérateurs Max-Flex TM Item: Installation Instructions / Instructivo de Instalación U.S. Cat. No. Euro Order No. MFMF VL900-JN0 MFKFR VL900-JM0 MFKF4R VL900-JM4
More informationFX Supervisory Controller Wireless TEC Option Card Installation Instructions
Installation Instructions Wireless TEC Option Card Date August 29, 2014 FX Supervisory Controller Wireless TEC Option Card Installation Instructions Applications IMPORTANT: The FX Supervisory Controller
More informationControlLogix DC ( V) Electronically Fused Output Module
Installation Instructions ControlLogix DC (10-31.2V) Electronically Fused Output Module (Catalog Number 1756-OB16E) To: See page: Obtain a User Manual 1 Identify the Module Components 2 Prevent Electrostatic
More informationOCTOBEAM. LED Lighting Effect USER MANUAL / MANUAL DE USUARIO
LED Lighting Effect USER MANUAL / MANUAL DE USUARIO PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE / POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR 1. Overview OctoBeam White is a LED Lighting Bar with
More informationShaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Rotor Mass Moment of Inertia: Shaft Loads:
EXAG Profibus /Shaft EXAG - Profibus Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm and ø 12 mm Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site modifications ATEX, IECEx, and
More informationMaterial: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Encoder Description EXAG SSI / Hollow Shaft EXAG SSI Hollow Shaft Encoder - Ø 78 mm Hollow Bore: Ø 14 mm and Ø 16 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits for on-site
More informationInstalling Simplex and Duplex Receptacles into: Series 9000 Structural Panel Series 9000 Energy Management Panel and Worksurface Avenir Power Panel
If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.322) for immediate action by people who want to help you. (Outside the U.S.A., Canada,
More informationSurge Protective Devices. Installation & Operation Manual. NEMA 12 (Steel) NEMA 1 (Non-Metallic) Model 350
Surge Protective Devices Installation & Operation Manual NEMA 12 (Steel) NEMA 1 (Non-Metallic) Model 50 ASCO SURGE PROTECTIVE DEVICE INSTALLATION, OPERATION AND MAINTENANCE MANUAL TABLE OF CONTENTS INSTALLATION
More informationFLEX I/O EtherNet/IP Adapter Module
Installation Instructions FLEX I/O EtherNet/IP Adapter Module Catalog Numbers 1794-AENT Use this manual as a guide to install the FLEX I/O EtherNet/IP Adapter Module. Note that this manual covers hardware
More informationRemote I/O Scanner. Installation Instructions. (Catalog Number 1747-SN)
Installation Instructions Remote I/O Scanner (Catalog Number 1747-SN) Inside...page Hazardous Location Considerations... 2 Environnements dangereux... 2 Overview... 3 Hardware Features... 4 Required Tools
More informationSINGLE GANG J-BOX, BLOCKING AND HARDWARE PROVIDED BY OTHERS. CROSS SECTION VIEW FINISHED SHEETROCK SLOT BY OTHERS 7-1/2 10 ADJ. PROVIDED BY OTHERS.
REGOLO PERIMETER WARNINGS Risk of electrical shock or fi re, disconnect power during installation or servicing. Read all instructions completely before starting installation. Install and wire in accordance
More informationDM6. User Guide English ( 3 10 ) Guía del usuario Español ( ) Appendix English ( 13 ) DRUM MODULE
DM6 DRUM MODULE User Guide English ( 3 10 ) Guía del usuario Español ( 11 12 ) Appendix English ( 13 ) 2 User Guide (English) Support For the latest information about this product (system requirements,
More informationMFMM 3VL9600-3JN01 MFKL3R 3VL9400-3JM01 MFKM3R 3VL9600-3JM01 MFCM036 3VL9600-3JQ31 MFCM048 3VL9600-3JQ41
s Max - Flex TM Operators Operadores Max-Flex TM Opérateurs Max-Flex TM Item: Installation Instructions / Instructivo de Instalación U.S. Cat. No. Euro Order No. MFML VL9400-JN0 MFMM VL9600-JN0 MFKLR VL9400-JM0
More informationMaterial: Weight: Bearing Life: Hollow Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Encoder Description EXAG Profibus / Hollow Shaft EXAG Profibus Hollow Shaft Encoder - Ø 78 mm Hollow Bore: Ø 14 mm, Ø 16 mm and Ø 1 inch Profibus DPV2 Functionality Resolution up to 30 bits for on-site
More informationMicroLogix Analog Input/Output Module
Installation Instructions MicroLogix Analog Input/Output Module (Catalog Number 762-IF2OF2) Inside For More Information...2 Description...3 Installation...4 Mounting...5 System Assembly...7 Field Wiring
More informationMCG Surge Protection
299-700-33B 299-700-33A MCG Surge Protection Installation/Operating Instructions for MCG 500 Series Important Warranty Information MCG surge protectors are designed to work at specific voltages and configurations,
More informationLX-Display. Installation Instructions LX-DSWSC1-0, LX-DSWSC2-0. Mounting. Applications. North American Emissions Compliance
LX-Display Installation Instructions LX-DSWSC1-0, LX-DSWSC2-0 Code No. LIT-12011572 Issued April 28, 2014 Supersedes August 6, 2009 Applications The LX-Display controllers have multifunction Liquid Crystal
More informationThe following modules are North American Hazardous Location approved: 1766-L32AWA, 1766-L32AWAA, 1766-L32BWA, 1766-L32BWAA, 1766-L32BXB, 1766-L32BXBA If you would like a manual, you can: download a free
More information1 PORT HARDENED SERIAL SERVER
QUICK START GUIDE LES421A 1 PORT HARDENED SERIAL SERVER 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM STEP 1 - Check for All Required Hardware 1-Port Hardened Serial Server This Quick Start
More informationP3-08RTD Analog Input
General Specifications Operating Temperature 0 to 60 C (32 to 140 F), Storage Temperature -20 to 70 C (-4 to 158 F) Humidity 5 to 95% (non-condensing) Environmental Air No corrosive gases permitted Vibration
More informationControlLogix DC (10-30V) Isolated Output Module
Installation Instructions ControlLogix DC (10-30V) Isolated Output Module (Catalog Number 1756-OB16I) To: See page: Obtain a User Manual 1 Identify the Module Components 2 Prevent Electrostatic Discharge
More informationCatalog Numbers Les Numéros de Catalogue Números de Catálogo: LMSM-3E/LMSM-6E INTRODUCTION
Wattstopper Segment Manager Supervisor Setup Guide No: 24821 06/17 rev. 1 Catalog Numbers Les Numéros de Catalogue Números de Catálogo: LMSM-3E/LMSM-6E Country of Origin: Made in China Pays d origine:
More informationEnclosed DOL Motor Starter Type 4x, Plastic, 3-Phase
Enclosed DOL Starter Type x, Plastic, Phase C US LISTED ENCLOSED INDUSTRIAL CONTROL PANEL WIRING SPECIFICATIONS CONTROL/COIL VOLTAGE: LINE (LINE) START/STOP (STSR) START STOP //8 //8 Customer Supplied
More informationVHDL par Ahcène Bounceur VHDL
VHDL Ahcène Bounceur 2009 Plan de travail 1. Introduction au langage 2. Prise en main 3. Machine à état 4. Implémentation sur FPGA 1 VHDL Introduction au langage Ahcène Bounceur VHDL VHIC (Very High-speed
More informationBarrel Temperature Control Module
Installation Instructions Barrel Temperature Control Module Cat. No. 1746-BTM Contents Use this document as a guide to install and wire the 1746-BTM barrel temperature control module. For this information
More informationSEL-3421 Motor Relay HMI (With LCD) Quick-Start Guide
SEL-3421 Motor Relay HMI (With LCD) Quick-Start Guide Overview The SEL-3421 Motor Relay HMI can: Read metering and monitoring data. Inspect targets. Control relay operations. Display diagnostics. Display,
More informationWASP Wireless Acceleration Sensor Puck USER MANUAL
WASP Wireless Acceleration Sensor Puck USER MANUAL VERSION 3.20 15/07/2016 WASP is a registered trademark owned by BossPac Engineering & Technology WASP is a PATENT PENDING technology owned by BossPac
More informationVI 021 S-DIAS VARAN Control Module
VI 021 S-DIAS VARAN Control Module Date of creation: 11.06.2013 Version date: 18.10.2017 Article number: 20-003-021-E Publisher: SIGMATEK GmbH & Co KG A-5112 Lamprechtshausen Tel.: +43/6274/4321 Fax: +43/s6274/4321-18
More informationUser Manual. 120 and 208/230 Volt Models
120 and 208/230 Volt Models 2016 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com / UM-enVision-Rev-B 2016 AMETEK Electronic Systems Protection / Technical Support:
More informationTeSys IEC Contactors and Overload Relays
TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the
More informationGETTING STARTED WITH IN-WALL RELAY SWITCH
GETTING STARTED WITH IN-WALL RELAY SWITCH This document is the property of Webee L.L.C. The data contained here, in whole or in part, may not be duplicated, used or disclosed outside the recipient for
More informationInternet Office 120V 600VA 300W Standby UPS, Ultra-Compact Desktop, USB
Internet Office 120V 600VA 300W Standby UPS, Ultra-Compact Desktop, USB NUMÉRO DE MODÈLE: INTERNET600U Points principaux 600VA ultra-compact 120V standby UPS Maintains AC output during power failures 4
More informationControlLogix DH-485 Communications Module
Installation Instructions ControlLogix DH-485 Communications Module Catalog Number(s) 1756-DH485 Inside... For See Page Identify Module Features 8 Prepare the Chassis for Module Installation 8 Determine
More informationC-DIAS Analog Input Module CAI 086 For eight, ±10V voltage inputs
C-DIAS ANALOG INPUT MODULE CAI 086 C-DIAS Analog Input Module CAI 086 For eight, ±10V voltage inputs This analog input module is used for the input of voltage values in the range of ±100mV / ±1.0V and10v.
More informationPOINT I/O Protected Output Module
0 1 Installation Instructions POINT I/O Protected Output Module (Cat. No. 1734-OB2EP Series C) 4 Module Status Network Status NODE: 24V DC Protected Output 9 1734 OB2EP 5 3 6 2 8 7 10 1 41825OB2E Description
More informationP3-RS Remote Slave. Remote Slave Specifications. The P3-RS is a full-featured, highperformance,
Remote Slave Specifications Mounting Location Controller slot in remote base Display LCD, x0 characters, backlit, LCD characters are 5x7 with a dot pitch of 0.5mm; 2.25mm x 3.5mm Communications - USB IN:
More information300 Series 330/320 Surge Protective Device Installation, Operation and Maintenance Manual
Power Switching & Controls For Business-Critical Continuity 300 Series 330/320 Surge Protective Device Installation, Operation and Maintenance Manual Installation, Operation and Maintenance Manual EMERSON
More informationPOINT I/O 120/220V ac Output Module
0 1 Installation Instructions POINT I/O 120/220V ac Output Module (Cat. No. 1734-OA2 Series C) 4 Module Status Network Status NODE: 120/220VAC Output 9 5 3 2 8 6 7 10 1 4182OA Description Description 1
More informationCompact 120V ac Input Module
Compact 120V ac Input Module (Catalog Number 1769-IA16) Installation Instructions Inside Module Description... 3 Module Installation... 4 System Assembly... 5 Mounting Expansion I/O... 6 Replacing a Single
More informationArmorBlock MaXum 4 Output Module Series B
Installation Instructions ArmorBlock MaXum 4 Output Module Series B (Cat. No. 1792D-0B4D) 41525 This ArmorBlock MaXum I/O module (Cat. No. 1792D-0B4D) is a stand-alone 24V dc I/O product which communicates
More informationInstruction Sheet PDS-SERIES SEQUENCED MULTI-MOUNT
Instruction Sheet PDS-SERIES SEQUENCED MULTI-MOUNT S u Sta tu e s t no or Si e Se qu tpu Up Cq cc /Denc ompen l e ee owe te n g r Se Lo q c a CON TR I nu enl O i ti ce L ate Clo Com prsed om i f i se d
More informationRemovable Terminal Block Specifications
To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation and operation of your equipment. These codes vary from area to
More informationV-2001A SINGLE ZONE (PLUS) PAGE CONTROL UNIT
Issue 8 V-2001A SINGLE ZE (PLUS) PAGE CTROL UNIT INTRODUCTI The V-2001A provides telephone system access to a single zone of one-way paging. WARNING: To reduce the risk of fire or electric shock, do not
More informationVARAN Splitter PROFINET VSP 042
VARAN SPLITTER PROFINET VSP 042 VARAN Splitter PROFINET VSP 042 With its 3 VARAN Out ports, the VARAN VSP 042 splitter module allows a VARAN bus system to be configured in a tree structure. At the Ethernet
More informationWattstopper. No: /17 rev. 1 Installation Instructions Instructions d Installation Instrucciones de Instalación
Wattstopper Dual Technology Multi-Way Wall Switch Sensor (V3) No: 458 /7 rev. Installation Instructions Instructions d Installation Instrucciones de Instalación Catalog Numbers Les Numéros de Catalogue
More informationRead me carefully before making your connections!
CROSS GAME USER GUIDE Read me carefully before making your connections! Warning: The CROSS GAME converter is compatible with most brands of keyboards and Gamer mice. However, we cannot guarantee 100% compatibility.
More informationAllen-Bradley PL. ControlLogix Drive Module. Installation Instructions. (Catalog Numbers: 1756-DMD30 and 1756-DMF30)
Installation Instructions ControlLogix Drive Module (Catalog Numbers: 1756-DMD30 and 1756-DMF30) The Drive Module mounts in a ControlLogix chassis. The ControlLogix system must be mounted within a suitable
More informationSIMONPALET SIMONLEVER ALTILLOS Y PASILLOS ELEVADOS PLATFORMS AND MEZZANINES LAGERBÜHNEN PLATES-FORMES ET MEZZANINES
SIMONPLET SIMONLEVER LTILLOS Y PSILLOS ELEVDOS PLTFORMS ND MEZZNINES LGERÜHNEN PLTES-FORMES ET MEZZNINES INDU0 SIMONINDUSTRIL Hasta 4500 kg (9920 lb) por bandeja Con carga uniformemente repartida Up to
More informationTK-EX2 CAT5 KVM Extention Kit User s Guide
TK-EX2 CAT5 KVM Extention Kit User s Guide Kit d'extension CAT5 pour KVM Guide de l'utilisateur CAT5 KVM Extention Kit Bedienungsanleitung Equipo de Extensión KVM CAT5 kit de amplificador de vídeo Version
More informationDEAKO SWITCH INSTALLATION GUIDE. Includes instructions for single-pole, 3-way, 4-way and dead-end 3-way wiring configurations for Deako Switches.
DEAKO SWITCH INSTALLATION GUIDE Includes instructions for single-pole, -way, 4-way and dead-end -way wiring configurations for Deako Switches. DEAKO.COM BEFORE YOU GET STARTED This installation guide is
More informationE1 Plus Overload Relay Specifications
Technical Data E1 Plus Overload Relay Specifications Bulletin Number 193, 592 Topic Page Product Overview 2 Standards Compliance and Certifications 2 Features 3 Catalog Number Explanation 4 General Specifications
More informationDES-1016R+/DES-1024R+ 10/100 Fast Ethernet Switch
DES-1016R+/DES-1024R+ 10/100 Fast Ethernet Switch Manual RECYCLABLE 0 TABLE OF CONTENTS 1 FEATURES...1 2 UNPACKING AND SETUP...2 UNPACKING...2 SETUP...2 DESKTOP OR SHELF INSTALLATION...3 RACK INSTALLATION...3
More informationPOINT I/O Source Input Module
0 1 2 3 Installation Instructions POINT I/O Source Input Module (Cat. No. 1734-IV2 and -IV4 Series C) Module Status Network Status NODE: 9 4 5 3 2 6 8 7 10 1 Description Description 1 Mounting Base1 6
More informationPRODUCT PROFILE BULLETIN 193 & 592 E1 PLUS ELECTRONIC OVER LOAD RELAYS
PRODUCT PROFILE BULLETIN 193 & 592 E1 PLUS ELECTRONIC OVER LOAD RELAYS FEATURES IEC and NEMA configurations Self-Powered Phase Loss Protection Wide 5:1 Adjustment Range Over-Molded Power Connections 1
More informationRoxtec G frame. flanged metal frame available with a single opening or in combinations with several openings in width and/or height.
Roxtec G rame RECTNGULR M Te Roxtec G rame is a Roxtec G langed metal rame available wit a single opening or in combinations wit several openings in widt and/or eigt. For use wit Group components ttacment
More informationSSI 021 S-DIAS Safety SSI Absolute Value Encoder
SSI 021 S-DIAS Safety SSI Absolute Value Encoder Date of creation: 25.02.2014 Version date: 18.10.2017 Article number: 20-894-021-E Publisher: SIGMATEK GmbH & Co KG A-5112 Lamprechtshausen Tel.: +43/6274/4321
More informationPower Supplies IC697PWR724/CE697PWR724
7 1 IC697PWR724/CE697PWR724 GFK-1047F, 90W Power Supply Module (IC697PWR724/CE697PWR724) datasheet GFK-1047F Features Operation from Three output voltages, 90 watts total +5 VDC output up to 18 amps +12
More informationALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
More informationMobiNEST. WASP Portable NEST Receiver USER MANUAL VERSION /08/2018
MobiNEST WASP Portable NEST Receiver USER MANUAL VERSION 1.2 22/08/2018 WASP is a registered trademark owned by BossPac Engineering & Technology WASP is a PATENT PENDING technology owned by BossPac Engineering
More information1. Getting to know the gimbal
1. Getting to know the gimbal Roll Motor Mounting Screw Containing Bracket Mode Button Joystick LED Light Power Button Shutter Button Thank you for choosing YI products 2. How to use the gimbal 1) Charging
More informationMicroLogix 1762-IQ16 DC Input Module
Installation Instructions MicroLogix 1762-IQ16 DC Input Module Catalog Number 1762-IQ16 Table of Contents Topic Page Important User Information 2 North American Hazardous Location Approval 4 Additional
More informationMicroLogix 1200 Isolated Relay Output Module
Installation Instructions MicroLogix 1200 Isolated Relay Output Module Catalog Number 1762-OX6I Table of Contents Topic Page Additional Resources 2 Description 3 Overview 3 Mounting 5 System Assembly 7
More informationUser guide. Stereo Bluetooth Headset SBH60
User guide Stereo Bluetooth Headset SBH60 Contents Introduction...3 Function overview...3 Hardware overview... 3 Basics...5 Charging the battery...5 Turning the headset on and off...5 Adjusting the volume...
More informationAXP 64 C AT Setup Guide
Product Category Setup Guide IMPORTANT: Refer to www.extron.com for the complete user guide and installation instructions before connecting the product to the power source. Disconnecting Power and Mounting
More informationC-DIAS Analog Module CAO 086 For eight ±10 V Outputs
C-DIAS-ANALOG OUTPUT MODULE CAO 086 C-DIAS Analog Module CAO 086 For eight ±10 V Outputs This analog output module can be used to control analog controllable components (i.e.: proportional pressure vent,
More informationDo Not Copy. Important User Information For More Information... 3
Installation Instructions DH/RS-C Interface Module (Catalog Number 1-KE) Inside page Important User Information... For More Information... Hazardous Location Considerations... Environnements dangereux...
More informationHeadend Unit (HEU) Quick Installation Sheet
Headend Unit (HEU) Quick Installation Sheet CMA-267-AEN GENERAL INFORMATION. The HEU chassis is supplied empty and only includes the factoryassembled fan module (FAM). All other modules are ordered separately
More informationIPS INTELLIGENT PUMP STARTER
IPS INTELLIGENT PUMP STARTER The IPS Intelligent Pump Starter features SMARTSTART motor protection, integrated electronic pump protection overload, and power metering and data logging options. Ø & Ø, 0/60
More informationCanada s Energy Future:
Page 1 of 9 1DWLRQDO (QHUJ\ %RDUG 2IILFH QDWLRQDO GH OҋpQHUJLH Canada s Energy Future: ENERGY SUPPLY AND DEMAND PROJECTIONS TO 2035 Appendices AN ENERGY MARKET ASSESSMENT NOVEMBER 2011 Page 2 of 9 Canada
More informationSystem 450 Series Expansion Modules with Relay Outputs Installation Instructions
Application System 450 Series Expansion Modules with Relay Outputs Installation Instructions C450SBN-3 C450SCN-3 C450SBG-3 C450SCG-3 IMPORTANT: Use this System 450 Series Expansion Module with Relay Output
More informationQuick Operating Guide
Quick Operating Guide Designed by evolis Welcome To The World of Evolis Card Printer Products! Congratulations on making the Pebble printer your choice! Please read carefully this Operating Guide before
More informationCompact Individually Isolated AC/DC Relay Output Module
Installation Instructions Compact Individually Isolated AC/DC Relay Output Module (Catalog Number 1769-OW8I, Series B) Inside Module Description... 2 Module Installation... 3 System Assembly... 4 Mounting
More informationRO 051 S-DIAS Relay Output Module
RO 051 S-DIAS Relay Output Module Date of creation: 10.08.2015 Version date: 18.10.2017 Article number: 20-064-051-E Publisher: SIGMATEK GmbH & Co KG A-5112 Lamprechtshausen Tel.: +43/6274/4321 Fax: +43/6274/4321-18
More informationInstallation Instructions
Installation Instructions SRM Redundancy Module (Cat. 1757-SRM) This document tells you how to install the SRM Redundancy Module into the ProcessLogix system. You should read these installation instructions
More informationDESCRIPTION AND OPERATION
Wattstopper WebLink Network Appliance for LI Complete Control Panel No: 25462 1/17 rev. 1 Installation Instructions Instructions d Installation Instrucciones de Instalación Catalog Number Numéro de Catalogue
More informationPC 400 Control Cabinet PC
PC 400 Control Cabinet PC Date of creation: 08.04.2015 Version date: 12.03.2018 Article number: 01-310-411-E Publisher: SIGMATEK GmbH & Co KG A-5112 Lamprechtshausen Tel.: +43/6274/4321 Fax: +43/6274/4321-18
More information