MTK smartphone Multiple downloading tool operating instructions

Transcription

1 MTK smartphone Multiple downloading tool operating instructions Note: 6.0 upgrade, first power off the phone and plug the data cable directly; 7.0 upgrade(the same way to upgrade from 6.0 to 7.0), first power off the phone and long press the volume(+), and then plug the data cable to start upgrade. 1.General Description 1.1, Software Installation No need to install, direct COPY entire directory to a local can, if you change the path must be re-set program. 1.2, Power Settings Power supply output voltage is set manually 4V, current limiting set to 2A. 1.3, Configuration First open the program, you need to download configuration parameters and files, after which the program will automatically save settings. 1.4, Start the program On the Tools directory which has a SPMultiPortFlashDownloadProject.exe file, double click to run. 1.5, Following documents are required 1) Driver_Auto_Installer_EXE_v rar; 2) SP_MDT_exe_v (service_center) ; 3) Packages. 2.Specific steps 2.1, Install the phone driver. Mobile power supply, plug in the USB cable, the computer recognizes the "New Hardware Wizard" as shown below, select Install from a list or specific location(s).

2 Figure one As shown manually select "Browse", select the folder in Driver_AUTO_Installer "infs", Figure II. Click OK to install phone drivers, Figure three. Figure two

3 Figure three 2.2, Projects with G517 download software, version D1-G Example Download software, make sure package "D1-G " There checksum.ini file, as shown in Figure four. Figure four

4 2.3, Multiple downloads Kit SP_MDT_exe_v (service_center) Use Notepad to open SPMultiPortFlashDownloadProject.ini files, configuration tools, download port, the port is not configured as Figure five previous instruments. Figure five Open SPMultiPortFlashDownloadProject.ini documents, Figure six and find ports will be as shown in the number of ports for the computer to modify the port number, shown in Figure seven. Figure six

5 Figure seven The ports port changes from 1 to 16 and kept modifications shown in Figure eight. Figure eight The PreloaderPorts port as Figure nine, is amended as 2-17 number, and save the changes, shown in Figure ten. (Note: PreloaderPorts port to port and in front of the modified ports staggered not consistent)

6 Figure nine Figure ten Double SPMultiPortFlashDownloadProject.exe file, open download tool, port becomes configured port (Figure eleven).

7 Figure eleven 2.4, Select the upgrade file In Scatter files menu, select Scatter file button (Figure twelve)

8 Figure twelve Select the interface into the software version to upgrade storage address, select the software, select MT6572_Android_scatter.txt file (Figure thirteen), select and open (Figure fourteen).

9 Figure thirteen Figure fourteen

10 2.5, Select the corresponding COM port A. COM port selection is based on download cable plugged into the computer's fixed port may be. Make sure the COM port: You can in the "My Computer" icon on the right mouse button select Manage Device Manager. A dialog box appears as shown in Figure fifteen. In the red box instructions to download the cable into the computer's serial port to: COM4. Notice must be in the drive when you have to install the downloaded appear. Figure fifteen B. Tool port settings, you can select all, as shown in Figure sixteen red border, the phone will automatically recognize connected port.

11 Figure sixteen 2.6, Click Start all. (Figure seventeen), ready to download

12 Figure seventeen Then phone (Loading the battery) Connect download cable, start the upgrade (Figure eighteen), red box marked Show download progress: Figure eighteen Progress bar to 100%. Upgrade is complete. 3.Error 3.1, Full stop after the red progress bar does not move: the emergence of DA ERROR. 1, check the downloaded files with a BIN packages Memory configuration and motherboard correspond; 2, the download rate reduced by one level to try; 3, the detection download line defines pick the wrong foot there; 4, while it may be the reason the motherboard hardware. 3.2, Press Start, insert phone press the power button is no response: 1, may be downloaded line driver is not installed; 2, may be incorrect or corrupted download cable; 3, may cause the motherboard hardware. A: Tooltip error box for package checksum.ini B: Click the tool start All appear as shown Figure twenty-three error window, the port is not configured tool, you need to configure SPMultiPortFlashDownloadProject.ini document detailing the process see and 2.3.3