ENA Control Tool software

Transcription

1 ENA Control Tool software

2 Notices The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Agilent Technologies. Microsoft, MS-DOS, Windows, Visual C++, Visual Basic, VBA and Excel are registered trademarks of Microsoft Corporation. Java is registered trademark of Sum Microsystems Corporation. Copyright 2011 Agilent Technologies Page 2

3 Notices (continued) The customer shall have the personal, non-transferable rights to use, or copy this application program in this manual for the customer s internal operations. The customer shall use this application program solely and exclusively for their own purpose and shall not license, lease, market, or distribute this application program or modification of any part thereof. Agilent Technologies shall not be liable for the quality, performance, or behavior of this application program. Agilent Technologies especially disclaims any responsibility for the operation of this application program to be uninterrupted or error-free. This application program is provided AS IS. AGILENT TECHNOLOGIES DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Agilent Technologies shall not be liable for any infringement of any patent, trademark, copyright, or other proprietary right by this application program or their use. Agilent Technologies does not warrant that this application program is free from infringements of such rights of third parties. However, Agilent Technologies will not knowingly infringe or deliver software that infringes the patent, trademark, copyright, or other proprietary right of a third party. Page 3

4 Features Hardware Key Emulator This program helps you to control the E5071C. This is useful for controlling ENA remotely. Utility software This program integrates following programs. Trace/Window Utility Simulation Utility Data Utility Setup Wizard Page 4

5 Program Description and Supported firmware Program title - Control Tool Program file name - ENACotrolTool_0100.exe Revision - Rev Supported ENA models and firmware - E5071C FW Rev.A or later - ENA-TDR is not supported Page 5

6 Installation procedure Unzip ENACOntrolTool_0100.zip file Copy all files and folder to D: drive Note: The Macro folder need to be placed under the same folder with ENAMacroStart.exe file Enable SICL-LAN Server on the ENA System -> Misc Setup -> Network Setup -> SICL-LAN Server -> ON Page 6

7 How to run and use the program Double click the ENAMacroStart.exe file under D: drive. Control Tool GUI is launched. Page 7

8 Trace/Window Utility Layout Tool Number of Ports Device Type/Topology Click image to setup layout Transparent ON/Off Scroll Bar Trace Control Trace Selection for Add button Single-ended Balanced Click here to change the mode Delete active trace Undo/Redo for trace control Add new trace next to the active trace Topology Page 8

9 Simulation Utility Fixture Simulator You can change and check the current Fixture Simulator setting with same window. Port Extensions You can change and check the port extension setting. Page 9

10 Data Utility Save Trace Data This sample program enables the ENA user to save the multiple channel/trace data with various format. * Data save as Active trace only, Active channel all traces, Displayed channel and all traces * CSV, MATLAB, and CITI format saving * Corrected or formatted data and memory saving See the help for more information Read TouchStone Format Selection Recalculate Fixture Simulator Load touchstone(.s2p,.s3p,.s4p) file This sample program enables to read saved touchstone file into ENA for post analysis. When ReCalc. Corr button is pressed, fixture simulator setting will be recalculated and applied. Page 10

11 Setup Wizard Check the following URL for detail. ( Passive Device &nid= &id= Amplifier &nid= &id= Mixer &nid= &id= Page 11

12 User Macro You can assign the VBA macros to these buttons. Macro.ini [FILE] macro00=trace Setup macro01=trace Add macro02=fixturesimulator macro03=pe_setup macro04=savetracedata_0101 macro05=display_snp_b macro06=enasetupwizard_0130 macro07=enaamplifierwizard_0111 macro08=enamixerwizard_0120 macro09=none macro10= NONE [NAME] macro00=layout Tool macro01=trace Control macro02=fixture Simulator macro03=port Extensions macro04=save Traces Data macro05=read TouchStone macro06=passive Deive macro07=amplifier macro08=mixer macro09=macro 01 macro10= Macro 02 [MESSAGE] label0=trace/window Utility label1=simulation Utility label2=data Utility label3=setup Wizard label4=user Macro You can change the assignment of the buttons by editing Macro.ini file and putting the macro to the Macro folder. This ini file exists in same folder of exe file. (under D: drive) [FILE] : Name of the VBA program to load ex) SaveTraceData_0101 [NAME] : Displayed name on the button ex) Save Trace Data [MESSAGE] : Category shown in GUI ex) Data Utility Page 12

13 Tips If the ENA firmware always on top of VBA program, try restarting firmware by following procedure. - System > Service Menu > Exit - Double click the Network Analyzer icon on the desktop Page 13