Effective Date: September 2017 Void After: September Product: Lead Free Plumbing Products File No. 6142
|
|
- Randolf Dorsey
- 6 years ago
- Views:
Transcription
1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: September 2017 Void After: September 2018 Jl. Raya Semarang -boja Wates, Ngaliyan Semarang, NG Indonesia Identification: Each product shall bear permanent and legible markings to identify the manufacturer. This marking shall be the trade name, trademark, or other mark known to identify the manufacturer. The product shall bear the appropriate IAPMO R&T certification mark. The product may also bear either "Lead Free" or "Low Lead" above or in close proximity to the IAPMO R&T certification mark. Characteristics: Products may include any pipe, pipe fitting, solder, flux, or other plumbing products providing water for human consumption. Products listed below are to be installed in accordance with the manufacturer's instruction. These products have been verified with weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
2 Products are in compliance with the following standard(s): Section 1417(d) of the Safe Drinking Water Act The lead content requirements of Section of the California Health & Safety Code
3 MODELS: Description Size TEES 1/ 1 2 COUPLINGS (SOCKET) 1/ 1 2 CROSSES 1/ 1 2 ELBOWS 90 DEG 1/ Page 3 of 12
4 1 2 6' ELBOWS 45 DEG 1/ 1 2 CAPS 1/ 1 2 STREET ELBOWS 90 DEG 1/ Page 4 of 12
5 1 2 STREET ELBOWS 45 DEG 1/ 1 2 REDUCING ELBOWS 90 DEG X X X X 1/4' X 1/ X X 1/ x x X 1 X 1X 1x 1x X 1/2' X X X X X X x1 2 X 2X1 2 X x x X X 1 Page 5 of 12
6 X X 2 X x 2 x REDUCING SOCKETS (COUPLINGS) 1/ X X X 1/ X X x 1/ X X X X 1/ X X 1/ X X x x x 1 X 1 X 1 x 1 x 1x X x x X x X 1 2 X 2 X 2 X 2 X 2 X 1 2 X X X X X1 X X 2 x x Page 6 of 12
7 x x x 1 x X 2 X X REDUCING TEES X 1/ x 1/ x xx xx x 1/ x x xx xx xx xx XX xx1 1 " X 1/ X x xx xx XX xx xx xx X xx XX1 XX X1/ XX X XX xx xx xx xx X X XX x XX X Page 7 of 12
8 XX xx XX xx1 xx1 xx 1XX 1XX 1XX 1XX 1XX1 1XX 1XX 1x 1x 1XX 1XX 1XX 1 X X 1 1XX 1XX 1XX1 1XX 1XX 1XX 1XX 1XX1 1XX 1 x 1 x 1XX 1X1X 1X1X2 x XX XX XX XX XX1 XX xx XX1 xx xx x x x1 X1X Page 8 of 12
9 x1x x1x x1x x1x1 X1X X XX2 XX 2X 2X 2X 2X1 2X1X 2X1X2 2 X 2xx 2xx 2xx2 XX XX X X X X X 1 X X 2 X X X X X 1 X X 2 x X x X LOCK NUT 1 OUTSIDE & INSIDE HEAD BUSHING 1/ X X Page 9 of 12
10 X1/ X X1/ X X X 1/ X X X X x 1/ X X X1/ X X X X 1 X 1/ 1X 1X 1X 1X 1X 2 X 1/ 2 X 2 X 2 X x X x1 2x 2 x 2 x 2 x 2 X 1 2 x x x x X X 1 X X 2 X X X X Page 10 of 12
11 PLUG NIPPLES B.EXT UNIONS " x 1 x X 2 x 5" x X X X 5" 1/ / 1 2 Page 11 of 12
12 UNION BRASS SEAT 1/ 1 2 FLOOR FLANGE 1/ 1 Description Size REDUCING STREET ELBOWS X REDUCING ELBOWS 45 DEG X Page 12 of 12
Effective Date: July 2018 Void After: July 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEVALUATION SUBJECT: PLASTIC COMPRESSION FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder: PHILMAC PTY LTD
ICC-ES Report PMG-1253 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: PLASTIC COMPRESSION FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report
More informationmhtml:file://c:\users\granzowa\desktop\nsf IAPMO PS-117 Listing.mht
Page 1 of 8 The Public Health and Safety Organization NSF Product and Service Listings These NSF Official Listings are current as of Friday, May 16, 2014 at 12:15 a.m. Eastern Time. Please contact NSF
More informationPrice Book - Section F Pipe & Accessories
Effective Date March, 20 Price Book - SCI Coop-Let F.T. Part No. Size / Description List Price 2500 SCI Coop-Let F.T. /2" x "- /2 $8.20 2520 SCI Coop-Let F.T. /2" x 2"-2 /2 $8.20 250 SCI Coop-Let F.T.
More informationCLASS 150. Investment Cast Stainless Steel Threaded End Fittings
Investment Cast Stainless Steel Threaded End Fittings Covering sizes from /8 to, DIE ERSTE manufactures and supplies the highest quality investment cast stainless steel threaded end fittings. In this series,
More informationPVC SOLVENT WELD DRAIN WASTE & VENT
PVC-17R PAGE 1 november 007 COUPLING (Hub x Hub) 0 110 11 11 11 1171 1 1/ 0 7 00 00 0 10.9.79 1.0.. 1. REDUCER BUSHING (Spigot x Hub) Style 17 x TRAP ADAPTER (Spigot x Slip Joint ) 1 19.71 REDUCER COUPLING
More informationSTAINLESS STEEL CAST FITTINGS 150lb 304 & 316 Stainless Steel Cast Fittings Specifications
STAINLESS STEEL CAST FITTINGS 150lb 304 & 316 Stainless Steel Cast Fittings Specifications Manufactured in ISO9000:2000 Facility Items Conform to AISI 304 / 316 Investment Cast SP114 Stainless Fittings
More informationPVC SOLVENT WELD SEWER & DRAIN FITTINGS
LIST U41-0418-IP PVC SOLVENT WELD SEWER & DRAIN FITTINGS APRIL 9, 2018 SUPERSEDES U41-1017-IP (OCTOBER 30, 2017) www.ipexna.com For products requiring bar coding, - 1 - www.ipexna.com LIST U41-0418-IP
More informationCH-PVDF RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS. Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov.
RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS CH-PVDF-1115 Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov. 25, 2013 Suggested list prices subject to change without notice. UPC
More informationWITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS (NO HUB) DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING
ICC-ES Report PMG-1082 Reissued 05/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS (NO HUB) DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Jan. 23, 2017 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 21.04 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Feb. 9, 2015 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 19.36 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationReproduced by Sabinet Online in terms of Government Printer s Copyright Authority No dated 02 February 1998 DEPARTMENT OF TRADE AND INDUSTRY
26 No. 37654 GOVERNMENT GAZETTE, 23 MAY 2014 DEPARTMENT OF TRADE AND INDUSTRY No. R. 379 23 May 2014 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008) AMENDMENT OF THE COMPULSORY SPECIFICATION
More informationMK-101 TILE SAW OWNER S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-101 TILE SAW OWNER S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS Part # 151991 Revision 113 02.2018 Manual Part# 153754 Caution: Read all safety and operating instructions before using
More informationMK-101 TILE SAW OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-101 TILE SAW OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS MK-101 Part # 167979 Part # 151991-SP Revision 116 08.2018 Manual Part No. 168237 Caution: Read all safety and operating
More informationIAPMO EGS A NON-PROFIT CORPORATION
5001 E. PHILADELPHIA STREET ONTARIO, CALIFORNIA 91761 USA (909) 472-4100 FAX (909) 472-4243 1 PRODUCT LISTING PROCEDURES Step 1 Read the application (Form #2) completely. Fill in all spaces and sign and
More informationCURRICULUM FOR SIX MONTH CERTIFICATE COURSE FITTING & PLUMBING UNDER DEVELOPMENT. Prepared By CURRICULUM DEVELOPMENT CELL
CURRICULUM FOR SIX MONTH CERTIFICATE COURSE IN FITTING & PLUMBING UNDER DEVELOPMENT Prepared By CURRICULUM DEVELOPMENT CELL INSTITUTE OF RESEARCH, DEVELOPMENT, TRAINING,U.P., KANPUR-208002 SIX MONTH CERTIFICATE
More informationIAF Information Document (draft)
International Accreditation Forum, Inc. IAF Information Document (draft) Information on the Transition of Management System Accreditation to ISO/IEC 17021:2010 from ISO/IEC 17021:2006 (IAF ID?:2010) The
More informationSOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
More informationProcess for the Evaluation and Acceptance of Building Products in the USA
Process for the Evaluation and Acceptance of Building Products in the USA Rick Okawa, P.E. Deputy Vice President of Global Services and Business Development An Integrated Building System Product Certification
More informationALRO PRODUCTS INTERNATIONAL, LLC Copper Fittings. Product # Ref. Numbers Nominal I.D. Size Refrigeration O.D. Size List Price ADAPTER - C X FIP
Page 1 of 12 ADAPTER - C X FIP P5312 603 1/4 3/8 X 1/4 $ 9.91 P4656 603 3/8 1/2 X 3/8 $ 10.36 P4654 603 1/2 5/8 X 1/2 $ 5.26 P4657 603 3/4 7/8 X 3/4 $ 7.22 P4658 603 1 1-1/8 X 1 $ 16.52 P4659 603 1-1/4
More informationSOCKET & THREADED FITTINGS
PVC SCHEDULE 80 FITTINGS CH-PVC-0617 Effective June 26, 2017 Supercedes CH-PVC-0315 of March 30, 2015 SOCKET & THREADED FITTINGS Suggested List Prices Subject to Change Without Notice Visit our website
More informationSOCKET & THREADED FITTINGS
PVC SCHEDULE 80 FITTINGS CH-PVC-1018 Effective October 1, 2018 Supercedes CH-PVC-0617 of June 26, 2017 SOCKET & THREADED FITTINGS Suggested List Prices Subject to Change Without Notice Visit our website
More informationCH-PVC-0315 PVC SCHEDULE 80 FITTINGS. Effective March 30, 2015 Supercedes CH-PVC-0812 of August 27, coupling - threaded
PVC SCHEDULE 80 FITTINGS CH-PVC-0315 Effective March 30, 2015 Supercedes CH-PVC-0812 of August 27, 2012 socket & Threaded fittings Suggested List Prices Subject to Change Without Notice Visit our website
More informationPRODUCT CERTIFICATION SCHEME FOR ENERGY DRINKS
Ref No: RACS/PCS/11 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Energy Drinks
More informationSpears FlameGuard CPVC SDR 13.5 Pipe and Schedule 40 and 80 fittings
Plastic Pipe and Fittings Plastic pipe and fittings are FM Approved for aboveground wet pipe fire protection systems for Light Hazard Occupancy sprinkler systems only. Except where noted otherwise, all
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0317)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0317) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0118)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More informationPureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
More informationA. Consumer Protection (Safety Requirements) Regulations to be Administered by Enterprise Singapore
Our Ref: Cir 2018-02 Date: 6 April 2018 To: All Registered Suppliers (RS) Subject: Administration of Consumer Protection (Safety Requirements) Regulations and Update of SAFETY Mark This circular is to
More informationSAFETY MARKING REQUIREMENTS. Nemko-CCL Marks
SAFETY MARKING REQUIREMENTS Nemko-CCL Marks Introduction Currently the Nemko North American Safety Certification Program services for the United States and Canada are being offered as a combination of
More informationCERTIFICATE OF COMPLIANCE
Certificate Number 20171030-E128128 Report Reference E128128-20171030 Issue Date 2017-OCTOBER-30 Issued to:, OSKALOOSA IA 52577 This is to certify that representative samples of COMPONENT - RECEPTACLES
More informationMK-212 SERIES OWNERS MANUAL & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-212 SERIES OWNERS MANUAL & OPERATING INSTRUCTIONS MK-212-4 MK-212-6 Revision 303 03.2012 Manual Part No. 159862 Caution: Read all safety and operating instructions before using this
More informationSQF 1000 Certificate Trade Mark
SQF 1000 Certificate Trade Mark Rules for Use 4th Edition NOVEMBER 2005 Safe Quality Food Institute 2345 Crystal Drive, Suite 800 Arlington, VA 22202 USA 202-220-0635 www.sqfi.com SQF Institute is a division
More informationEffective Date: not available -Rev. 3/22/2012- Void After: Product: Plumbing Fixture Fittings File No. 3801
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationConformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Telecommunication Standardization Bureau (TSB) Consultant
Conformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Standardization Bureau (TSB) Consultant Moscow, 9-11 november 2011 Contents The benefits of conformity assessment Conformity
More informationAMENDMENT TO THE COMPULSORY SPECIFICATION FOR SWITCHES FOR FIXED INSTALLATIONS (VC 8003)
610 National Regulator for Compulsory Specifications Act (5/2008): Amendment to the Compulsory Specification for switches for fixed installations (VC 8003) 39220 DEPARTMENT OF TRADE AND INDUSTRY STAATSKOERANT,
More informationTURKISH STANDARDS INSTITUTION
TURKISH STANDARDS INSTITUTION NEW GLOBAL OLD APPROACH REGULATIONS CONFORMITY ASSESSMENT PROCEDURES AND PRINCIPLES Board Decision : 29.04.2014 Date 50.-236 Validity date : 05.05.2014 CHAPTER ONE Objective,
More informationTransition for California Code Certifications for Current Certificate Holders
Transition for California Code Certifications for Current Certificate Holders Because of the process utilized to develop the California exams, the International Code Council has determined that California-specific
More informationCertification program PCWU-3
The certification program of utility products type 3 of the certification program according to PN-EN ISO/IEC 17067 Number: Page: 1 z 8 MS-0013527 Is valid from: 01.03.2016 Prepared: Tomasz Marcinek Approved:
More informationGROUND FAULT CIRCUIT INTERUPTERS
Title: GFCI Effective Date: 11/14/2014 Control Number: THG_0031 Revision Number: 1 Date: 10/21/2015 Annual Review Completed: 5/13/2015 GROUND FAULT CIRCUIT INTERUPTERS CONTENTS I. PURPOSE II. GENERAL REQUIREMENTS
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment Requirements for bodies certifying products, processes and services
INTERNATIONAL STANDARD ISO/IEC 17065 First edition 2012-09-15 Conformity assessment Requirements for bodies certifying products, processes and services Évaluation de la conformité Exigences pour les organismes
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx BKI 07.0001X issue No.:1
More information6.5 Cu. Ft. S-Series Blast Pot Part Numbers & Schematics Guide
Always Innovative. Always Reliable. 6.5 Cu. Ft. S-Series Blast Pot Part Numbers & Schematics Guide Metering Valve Remote Configurations Standard Features Upgrade Options Moisture Separator Bantam Part
More informationPRODUCT CERTIFICATION SCHEME FOR WATER PRODUCTS
Ref No: RACS/SOP/31 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology(ESMA) to assure that Water
More informationAccreditation process (LA-I-02)
Accreditation process (LA-I-02) Bureau of Laboratory Accreditation Department of Science Service Ministry of Science and Technology 75/7 Rama VI Road, Ratchathewi District, Bangkok 10400 Tel: 0-2201-7325,
More informationCOPPER NICKEL FORGED AND MACHINED FITTINGS
adaptors in copper nickel butt welding ends x female thread ØD1 x ØE mm ØE L A.A/f weight (NPT) mm mm Kg/piece 0.38 x 0.5 16 x 20 1/2" 34 27 0.07 0.5 x 0.75 20 x 25 3/4" 37 32 0.1 0.75 x 0.75 25 x 25 3/4"
More information3-23 March 1/07 BUSHINGS STANDARD SPECIFICATION: MATERIALS: DIMENSIONS: FLANGE DIMENSIONS: THREADS:
BOSHART INDUSTRIES Telephone: -9-9- - Toll Free: -00-- Fax: -9-9-0 - www.boshart.com CAST BRONZE THREADED PIPE FITTINGS - LBS - March /07 STANDARD SPECIFICATION: Northwest Territories Yukon Territories
More informationCRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS
CRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS Approved By: Executive: Accreditation: Mpho Phaloane Revised By: RBI STC Working Group Members Date
More informationCERTIFICATION CONDITIONS
1 of 5 + CERTIFICATION CONDITIONS PERMIT NO 000/0. SATAS SOUTH AFRICAN TECHNICAL AUDITING SERVICES Pty Ltd Co Reg No 2002/015355/07 AGREEMENT ENTERED INTO WITH Co Reg No.. 2 of 5 CERTIFICATION CONDITIONS
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2009-06-09 Page 1 of 10 Report Reference # E182560-A11-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL 60601-1, 1st Edition, 2006-04-26 (Medical Electrical Equipment,
More informationCertification Marketing Guidelines & Tips
Certification Marketing Guidelines & Tips Smithers Quality Assessments, Inc. 121 South Main Street Akron, OH 44308 p: 1.866.688.0134 f: 330.762.7447 e: sqa@smithers.com Hello! Congratulations on achieving
More informationGeneral Rules for Product Certification by the co-operation of certification bodies (GRPC)
29. January 2018 General Rules for Product Certification by the co-operation of certification bodies (GRPC) Contents: 1 The Co-operation of Certification Bodies (CCB) 1.1 General 1.2 Procedure 1.3 CCB
More informationS. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7
Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:
More informationIECEx Scheme for Certification of Personnel Competence for Explosive Atmospheres Malaysia Experience
IECEx Scheme for Certification of Personnel Competence for Explosive Atmospheres Malaysia Experience BASORI HJ SELAMAT SIRIM QAS International 2014 IECEx INTERNATIONAL CONFERENCE 19 20 February 2014 Kuala
More informationPipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
More informationLAW OF THE REPUBLIC OF KAZAKSTAN «ON CERTIFICATION»
April 27\ 99 Draft LAW OF THE REPUBLIC OF KAZAKSTAN «ON CERTIFICATION» This Law shall establish legal basis of certification of products, quality systems and production, (further processes), works and
More informationMacon Plastics, Inc. Solvent Weld SCH 40/80 DWV
Catalog #210SDWV MP Macon Plastics, Inc. & DWV Fittings P R I C E L I S T Solvent Weld /80 DWV Effective Date: 02/02/15 Catalog : 210SDWV Revision: D Supercedes: 209SDWV Not sure if you have a current
More informationStainless Steel Parts & Accessories Catalog NOVEMBER 2017
Stainless Steel Parts & Accessories Catalog NOVEMBER 2017 www.airnet-system.com TABLE OF CONTENTS PIPING PIPE 304L... 3 PIPE 316L... 3 FITTINGS QUICK DROP... 4 SWAN NECK... 4 ELBOW 45... 4 ELBOW 90...5
More informationNEW PACKAGING from NIBCO... O.D. Size. *Pkg Qty. Bag Case
WROT COPPER FITTINGS ACR-0518 Effective May 14, 2018 Supercedes ACR-0917 of September 25, 2017 Visit our website for the most current information *Prices and MTO status subject to change without notice
More informationAccreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service
Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service 1. Overview of HKAS Originated as an accreditation scheme called HOKLAS in 1985
More informationCertification Process Household and Similar Equipment
Certification Process Household and Similar Equipment Ordinance No. 371, of December 29, 2009 Objective: Evaluation of household and similar appliances, with a focus on security requirements in order to
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2011-02-09 Page 1 of 16 Report Reference # E116994-A60-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60601-1, 1st Edition, 2006-04-26 (Medical
More informationPolicies and Procedures for CTIA Authorized Testing Laboratories
Policies and Procedures for CTIA Authorized Testing Laboratories Revision 1.1 June 2012 CTIA Certification Program 1400 16 th Street, NW, Suite 600 Washington, DC 20036 e-mail: certification@ctia.org Telephone:
More informationGuidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External
Guidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External PREPARED BY: Head (MSCD) APPROVED BY: C.E.O PAGE : 1 OF 10 Table of Content 1.
More informationPEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
More informationGreen Council Ltd Green Council Certification Scheme (GCCS)
1.0 Introduction Use of GC s 1.1 Organizations certified by Green Council Ltd (GC) management system certification schemes are entitled to use the GC s in accordance with the following conditions. 1.2
More informationGlobal Wind Organisation CRITERIA FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY December 2015 (Version 3) 1 Contents 1. Introduction... 5 2. Criteria for approval of a Certification Body... 5 3. Selection of audit team members
More informationIndonesia - SNI Certification Service Terms
Indonesia - SNI Certification Service Terms These Service Terms shall govern the Indonesian National Standard ( SNI ) Certification Services performed by the UL Contracting Party (as identified in the
More informationAbu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer
Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer Issue: 1.0 Date: 21/01/2018 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI
More informationRegulations for Compulsory Product Certification
Regulations for Compulsory Product Certification Chapter I General Provisions Article 1 Based on relevant laws and regulations covering product safety licensing and product quality certification so as
More informationTimber Products Inspection, Inc.
Timber Products Inspection, Inc. Product Certification Public Document Timber Products Inspection, Inc. P.O. Box 919 Conyers, GA 30012 Phone: (770) 922-8000 Fax: (770) 922-1290 TP Product Certification
More informationMK-VTS/50 PARTS LIST Manual Part No Revision 111
www.mkdiamond.com MK-VTS/50 PARTS LIST Revision 111 08.2018 Manual Part No. 167790 Caution: Read all safety and operating instructions before using this equipment. This owners manual MUST accompany the
More informationHarris County Onsite Wastewater Seminar. NSF International 2015
Harris County Onsite Wastewater Seminar NSF International 2015 Accreditation vs. Certification defined Brief overview of NSF Purpose and Value of Technology Approval Certification Process Questions Accreditation
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More information3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com JUNE C- BULLETIN A.C.V.I.M., REV.
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More informationRULES ON THE USE OF SIRIM QAS INTERNATIONAL CERTIFICATION MARKS
RULES ON THE USE OF SIRIM QAS INTERNATIONAL CERTIFICATION MARKS These rules specify how SIRIM QAS International s certification marks shall be depicted and conditions relating to their use. A client whose
More informationAsureQuality Limited. CodeMark Programme. Certificate Holder Responsibilities and Requirements
AsureQuality Limited CodeMark Programme Certificate Holder Responsibilities and Requirements Page 1 of 6 1. SCOPE This document describes the responsibilities and requirements of Certificate Holders for
More informationThe Value of ANSI Accreditation. Top 10 Advantages. of accredited third-party conformity assessment
The Value of ANSI Accreditation Top 10 Advantages of accredited third-party conformity assessment The American National Standards Institute (ANSI) offers highly recognized accreditation programs globally
More informationCode of Conduct. Certified Backflow Tester
Certified Backflow Tester Sarasota County Public Utilities (SCPU) has the primary responsibility of protecting the public water distribution system. The utility must take all reasonable precautions to
More informationCopper and Carbon Steel Piping Systems Keeping the art of distribution simple
Copper and Carbon Steel Piping Systems Keeping the art of distribution simple Copper Tube & Fittings Shawston offer a complete range of Copper & Carbon Tube, along with a full range of fittings. Our range
More informationACCAB. Accreditation Commission For Conformity Assessment Bodies
ACCAB Accreditation Commission For Conformity Assessment Bodies ACCAB Platinum Plus Accreditation For Certification Bodies, Inspection Bodies, Testing & Calibration Laboratories and Medical Laboratories
More informationQuality Assurance Procedure Use of Accreditation Body & FP Certification FZE Marks, Logos and Symbols
Index 1.0 Purpose 2.0 Scope 3.0 References 4.0 Definitions 5.0 Responsibilities 6.0 Procedure 7.0 Records FP Certification Template Rev 002 1.0 Purpose 1.1 This procedure describes the applicable, rules
More informationUSA Whole Price List
USA Whole Price List Tips & Tricks How to Use the BMI Parts Catalog 1. Using the Table of Contents This reference page not only provides a listing of price lists and page numbers, it also links to each
More informationInspection and Certification for Individual Farms, Smallholder Group Certification S S R A N A S R S C I E N T I S T
Inspection and Certification for Individual Farms, Smallholder Group Certification S S R A N A S R S C I E N T I S T What is Certification? Organic certification system is a quality assurance initiative,
More informationACCREDITATION CRITERIA FOR MANAGEMENT SYSTEM CERTIFICATION BODIES ISSUE NO : 01 ISSUE DATE : 17/01/2015 PREFACE
International Standards Accreditation Council No.14, M.T.H Road, Opp to Vivekananda School, Vivekananda Nagar, Ambattur, Chennai 600 053. Tamil Nadu, India. Tel : 044 65554660 Email : info@isacglobal.org
More informationRD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
More informationParts Manual Fittings - Brass
Parts Manual Fittings - Brass Page 1 of 12 Item No. CCP Part# Mfg. Part# CONA Material# Description 1.01 135118 LF41S-8 150010308 NUT,MILLED,SHORT TYPE,1/2 TUBE, LL 1.02 542780 308317 150004237 NUT,SHORT,1/4
More informationDescription of the TÜV NORD CERT certification procedure GMP+ FC (Feed Certification scheme) of GMP+ International B.V. (NL)
Certific ation Table of contents 1 CERTIFICATION PROCEDURE... 3 1.1 Audit Preparation... 3 1.2 Establishment of readiness for certification... 3 1.3 Temporary approval... 3 1.4 Audit Stage 2 Certification
More informationAbu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard
Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard Issue: 1.0 Date: 01/09/2015 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI QUALITY
More informationStandard Fittings. Fig. List Incremental UPC Bag Box No. Size Price Order Qty Weight Qty. Qty.
BLZM-0414 Effective April 28, 2014 Supercedes BLZM-0413R of April 22, 2013 Standard Fittings Prices and MTO status subject to change without notice Visit our website for the most current information ADAPTERS
More informationStandard Fittings. Fig. List Incremental UPC Bag Box No. Size Price Order Qty Weight Qty. Qty.
BLZM-0717 Effective July 31, 2017 Supercedes BLZM-0414 of April 28, 2014 Standard Fittings Prices and MTO status subject to change without notice Visit our website for the most current information ADAPTERS
More informationG R E E N PLUMBING D E S I G N Candidate Bulletin
GREEN PLUMBING DESIGN Candidate Bulletin PROGRAM OVERVIEW The Green Plumbing Design (GPD) certificate program, sponsored by the American Society of Plumbing Engineers and the International Association
More informationTechnical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
More informationMK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 202 08.2012 Manual Part# 161117 Caution: Read all safety and operating instructions before using this equipment.
More informationInformation technology Security techniques Telebiometric authentication framework using biometric hardware security module
INTERNATIONAL STANDARD ISO/IEC 17922 First edition 2017-09 Information technology Security techniques Telebiometric authentication framework using biometric hardware security module Technologies de l information
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2012-02-09 Page 1 of 13 Report Reference # E116994-A76-UL UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1:2005, 3rd ed. (Medical Electrical Equipment - Part 1: General Requirements
More information