RELEASE NOTES. Practice Management. Version

Transcription

1 RELEASE NOTES Practice Management Version

2 Author Created and Published by Reckon Limited Level 12, 65 Berry Street North Sydney NSW 2060 Australia ACN All Rights Reserved Copyright 2015 Reckon Limited Copyright & Trademarks No part of these materials may be reproduced or transmitted in any form or by any means, including photocopying, without written permission of Reckon Limited. Every effort has been made to ensure the accuracy and completeness of this manual. However, neither Reckon Limited, its subsidiaries, employees and agents, are liable for any errors or omissions. This document should not be relied on as a detailed specification of the system. In addition, Reckon Limited reserves the right to issue revisions, enhancements and improvements to Reckon APS software or any other Reckon software at any time without notice. Every effort will be made to ensure that the manual is updated concurrently and that the user is not inconvenienced as a result of any change. Reckon, Reckon logos, R logos, Reckon APS, Advance and Accountable Technology are trademarks of Reckon Limited. Reckon Limited PAGE 2 OF 8

3 Contents Introduction... 4 Known Issues... 4 Reference Numbers... 4 All Applications... 5 Central Console... 5 Matter Console... 6 Debtors... 6 Disbursements... 6 Fees Console... 6 Timesheets... 6 Correspondence... 6 Reporting... 6 Listings... 6 System Administration Consoles... 7 Attributes... 7 Organisation Structure Maintenance... 7 Standard Matters... 7 Advanced Actions... 7 Appendix 1 Credit Management Users... 7 Appendix 2 Client Relationship Management Users... 7 Appendix 3 Value Billing Users... 7 Appendix 4 Resource Planning Users... 8 Reckon Limited PAGE 3 OF 8

4 Introduction These release notes only cover the contents of the service pack PM Version These notes that are part of your package and are installed in the location shown below. The following convention is used throughout this document: Enhancement Correction For PM 10.1, these release notes cover PM and any associated amendments to CRM, CM, VB and RP. If you are not a licensed user of a product mentioned in the list above, some sections of these release notes may not be of use to you. Known Issues A knowledge base article has been created to record any new known issue as a result of this release - Knowledge Base article # The known issues are detailed separately in the knowledge base article, linked to the knowledge article #. For each FIXED article the linked Knowledge Article will contain details on how to obtain the update. For each LOGGED article, the issue has been logged for development and will be resolved in a future release. To review the Knowledge Base Article #15440, visit the MyAPS Portal, enter the article number and press the search button. MyAPSPortal - Reference Numbers Each item in this document is prefixed by a corresponding reference number. From time to time a Reckon staff member may advise you of a reference number for an outstanding issue or enhancement request. Once that change has been released, the release notes document will include the reference and an explanation of the change. Reckon Limited PAGE 4 OF 8

5 All Applications The following situations have been corrected. Central Console # Launching external applications (and browsers) caused Reckon APS to Wait until these other browsers closed before allowing Reckon APS to be closed. # In some circumstances, some user settings, such as Auto Hide Slider and/or screen dimension default positions, caused console crashes. # Correct default band data for Consoles to ensure the bands open expanded in the correct context (e.g. Fees). # The duplicate function on Add, did not retain mandatory field values in some circumstances. #21108/ When adding a new client, it was possible to cancel the 'Add wizard when other records for the new client had already been added by another user. We now check for this situation and disallow the cancelling of Add if this new client has been used in other contexts, e.g. a new matter already added! # Document type icons no longer displayed on the Client Worksite page. # Duplicating a Console layout from a fee earner where the fee earner ID (internal numbering system) contained a zero sometimes resulted in an error. Actions #21114/ Matter Rollover: In order to mirror the behaviour of PM 9.1.x, we no longer create a target date on the client:matter during rollover if the No Date option is chosen on the standard matter. This assumes that the Rollover Method value is Roll Prior Year Milestones. This does not apply to RP users who have to have target dates in order to create resource allocations. # Matter Rollover: When Document Store (ADM) is in use and set to link at client and matter level, the newly created Matter Managed folder path will be formulated correctly even if the Client Managed folder does not exist. # WIP Move: Remove Unallocated Interims that were available for selection under Disbursements these could then incorrectly be moved to another client matter. If you use WIP Move and think you may have inadvertently moved an Interim Fee from the Disbursements list please contact Reckon APS Support for assistance. Relationships # Under View, the Indirect Relationship flag should be off by default. Documents #21831/ The action Rename Folder did not 'move' folders across volumes. # Performance improvements for the page. # When Document Store has been set to link at client level, the Client Managed Folder cannot be removed. Reckon Limited PAGE 5 OF 8

6 Matter Console Debtors # Putting a matter On Hold generated an object ref not set to an instance of object...' error in some circumstances # Statements gave an 'Error (6): overflow..' error when filtering on a combination of Partner, Manager or Department. # The batch control form was very slow to refresh if you re-sorted the batches. # When an apostrophe was used on a value in Attributes which was then used as a filter on Statements, this caused an overflow error. Disbursements # The Disbursement batch summary report did not show transactions in data entry sequence in some cases. Fees Console WIP # Fee locked by other user were editable. It was a Refresh issue in Fees. # The Print button was disabled for a posted fee on the WIP page when you don t use fee approvals. Fee Entry # Turning off Edit mode whilst focus was still on the fee entry narration hid the narration. Timesheets # It was possible to corrupt timesheet and overtime data by using specific character strings within the text of the narration. # When running a very large screen resolution setting, Standard Style Timesheets would experience an Overflow 6 error. Correspondence # Improved error trapping on bulk ing of Correspondence. # If you are using the new layouts (.repx) and using Outlook 2013, ing a single invoice or statement resulted in an error on sending the message. Reporting Listings # Exporting a datasheet to Excel - hidden columns were no longer hidden in Excel. Reckon Limited PAGE 6 OF 8

7 # Exporting a datasheet to Excel used to generate an error - Datasheet source ExporttoExcel APS.Share.Office3.0..'. System Administration Consoles Attributes #8940. On the Addresses band, the Supersede function inserted extra lines into the replaced address in some circumstances. Organisation Structure Maintenance # The Rename option was not available. Standard Matters # Reports/Standard Matter Milestone Report generated an 'application-defined or object-defined' error. Advanced Actions Data Import/Export # Importing disbursements for internal matters is invalid. This was not handled correctly. Appendix 1 Credit Management Users # Credit Centre: The right mouse option Reallocate Transactions, used on the same transaction for a 3rd time in a row could cause Console crashes. # Actions: The Date Updated column for all the Actions shown on the grid was overwritten with the current date in some circumstances. Appendix 2 Client Relationship Management Users # Events: Adding attendees caused an error in some circumstances. Appendix 3 Value Billing Users # The Contracts Narrations Console did not show the Narration page if Standard Fee Narrations was disabled in JOE rights. # The Invoice Narration values for a Milestone contract on the Contract selector did not get displayed on a Contract List. Reckon Limited PAGE 7 OF 8

8 Appendix 4 Resource Planning Users # Work Centre: Action, Planning Batch or Move Allocations selecting a value that contained an apostrophe resulted in an 'argument length must be greater than zero' error. # In Timesheets, the Weekly Summary displayed incorrect information in some circumstances. Workflow Templates # It was possible to change a template to repeatable once that template was in use. There is now a check for this situation. # It was possible to delete a repeatable milestone from a template once that template was in use. There is now a check for this situation. # It is no longer possible to edit a milestone s repeatable flag if the template it is part of is in use. There is now a check for this situation. Reckon Limited PAGE 8 OF 8